PREMIUM SNOWMOBILE LIFT PART # 9016Y ASSEMBLY INSTRUCTIONS PARTS LIST Qty
Description
1
Base Piece
1
Stem Piece # 1
1
Stem Piece # 2 w/Handle
2
Hook Brackets
1
Wide Hook
1 Medium Bolt, 1 Long Bolt, 2 Lock Nuts, 4 Locking Pins Install stem # 1 over the base piece & fasten with 2 of the locking pins
Insert Stem # 2 (with handle) into Stem # 1 with the straight portion of the handle facing the opposite way of the base & fasten with locking pins
Use the long bolt & lock nut to fasten the hook onto the hook brackets. (Make Make sure the narrow portion of the brackets are attached to the handle). Use the medium bolt & lock nut to fasten the hook brackets to the end of the handle
YOUR LIFT IS NOW COMPLETELY ASSEMBLED AND READY TO USE
IGNITION PRODUCTS WILL NOT BE RESPONSIBLE FOR PERSONAL INJURY OR DAMAGE TO PERSONAL PROPERTY DUE TO INCORRECT ASSEMBLY OR USE. FOR MORE INFORMATION CONTACT IGNITION PRODUCTS @ (905) 683-3785 683
SOULÉVATEUR HAUTE QUALITÉ DE MOTONEIGE
PIÈCE # 9016Y INSTRUCTIONS DE MONTAGE
LISTE DES PIÈCES Qté
Description
1
Châssis
1
Tube # 1
1
Tube # 2 a / Poignée
2
Supports de crochets
1
Crochet large
1 Boulon Medium, 1 Boulon Long, 2 Écrous de blocage, 4 Tiges de blocage Installez la tige #1 sur le châssis et fixez avec 2 tiges
Insérez le tube #2 (avec ka poignée) dans le tube #1 avec la portion rectiligne de la poignée faisant face de façon opposée au châssis & fixez avec les tiges de blocage
Utilisez le boulon long & l’écrou de blocage pour fixer le crochet sur les supports de crochets. (Assurez-vous (Assurez que la partie étroite des supports soit attachée à la poignée). Utilisez le boulon moyen & l’écrou de blocage pour fixer les supports de crochet à l’extrémité de la poignée.
VOTRE SOULÉVATEUR EST MAINTENANT ASSEMBLÉ ET PRÊT À ÊTRE UTILISÉ
IGNITION PRODUCTS N’EST RESPONSABLE DES BLESSURES PERSONNELLES OU DES DOMMAGES À LA PROPRIÉTÉ CAUSÉS PAR UN MONTAGE OU UNE UTILISATION INADÉQUATE. POUR PLUS D’INFORMATION, CONTACTEZ IGNITION PRODUCTS @ (905) 683-3785 683