Catalogue 2017 — Lancer Europe by IJsbreker

Drink dispensing solutions program for Coca Cola units

www.lancereurope.com

IBD 4500

Ice Beverage Dispenser

Customizable, efficient, and profit producing.

The IBD is Lancer’s n° 1 selling self-serve dispenser. Hard-plumbed syrup and water lines deliver excellent ice-cold drinks thanks to Cold Plate Technology. Versatile valve configurations and a portion-control option allow for easy beverage cost monitoring. Topped with a compelling wrap-around display, the IBD is a favorite of our customers.

Features: • Industry standard platforms in 22 inch - 6 valve, 30 inch - 8 or 10 valves, 44 inch - 12 valves lever or push button dispensing versatility. • Standard LED Illumination. • High-capacity drip tray to handle customer ice and beverage over-fill helps avoid safety hazards and drink station clean-up from spills. • Unique hex-drive ice agitation and dispense drive system for trouble-free operation and long service life. • High-capacity ice storage bin. • Multiple valve configurations available for self-serve and portion control operation to control beverage costs. • Heavy Duty Stainless Steel construction, exterior and interior • Fully insulated storage bin and drip tray controls condensation and helps avoid moisture related safety hazards. • Plumbing access front and rear for installation flexibility. • Flexible soda, plain water configuration options.

www.lancereurope.com

IBD 4500 series IBD 4500 — 22”

IBD 4500 — 30”

IBD 4500 — 44”

• DIMENSIONS Width: Depth: Height:

762 mm / 30.00 inches 775 mm / 30.50 inches 864 mm / 43.00 inches

• DIMENSIONS Width: 1.117 mm / 44.00 inches Depth: 775 mm / 30.50 inches Height: 864 mm / 43.00 inches

• SPACE REQUIRED: Width: 600 mm / 22.00 inches Depth: 800 mm / 30.50 inches

• SPACE REQUIRED: Width: 800 mm / 30.50 inches Depth: 800 mm / 30.50 inches

• SPACE REQUIRED: Width: 1.130 mm / 44.00 inches Depth: 800 mm / 30.50 inches

• ELECTRICAL: 230VAC/50Hz, 1.5 AMPs 115VAC/60Hz, 3 AMPs

• WEIGHT: Model 22” with ice: 184 kg / 405 pounds

• WEIGHT: Model 30” with ice: 238 kg / 524 pounds

• WEIGHT: Model 44” with ice: 344 kg / 758 pounds

• ICE (cube): capacity: 82 kg / 164 pounds

• ICE (cube): capacity: 113 kg / 249 pounds

• ICE (cube): capacity: 163 kg / 359 pounds

• FITTINGS: Soda inlets: 9.5 mm / 3/8 inches male barb Syrup inlets: 9.5 mm / 3/8 inches male barb

• ValveS: LEV® other valves available upon request

•

558 mm / 22.00 inches 775 mm / 30.50 inches 864 mm / 43.00 inches

FLEX MANIFOLD CONFIGURATION: Soda/PW 8 valve: 3-1-1-3 10 valve: 3-1-2-1-3 Note: specifications are the same for 8 and 10 valve.

• DRAW PERFORMANCE: Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 12 drinks/min. 350 ml (12 oz) 32 °C / 90 °F ambient temperature 8 drinks/min. 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

ICE MAKER COMPATIBILITY. • • • •

Accepts 30” and 22” wide ice makers (adapters available). Manual front load when ice maker installed. Variable automatic agitation timer. Ice makers available on request.

IBD without coldplate available

*Based on internal testing, under equivalent conditions, a Coca-Cola BevarietyTM - (Lancer model 85-2308C-122-07 Coca-Cola Legacy - (Lancer model 85-2378T-122-01) and Pepsi Intellicarb (IMI Cornelius model CB23223AHFK8)

IBD 4500 Spec Sheet 12/16

ICD series

Ice Cooled Drop-in dispensers.

Minimal space – maximum dispensing capability.

The ICD series drop-in dispensers are designed using the highest quality materials and state-of-the-art technology providing our customers with consistent drink quality.

Features: • Stainless Steel construction with sealed-in high performance cold plate. • 3/4” drain with strainer to prevent ice blockage. • Stainless Steel flooded soda manifold and multiple plain water configurations. • Ice bin insulated with CFC free structural foam. • Tower designed with removable splash plate and drip tray for easy cleaning. • Lancer LEV or LVV valves available with Lever, Push Button, or Portion Control. • Optional top merchandiser or back marquee features, with lighted graphics or LCD screen.

www.lancereurope.com

ICD dispensers series ICD 2200 — 15”

ICD 2300 (Sabre) — 23”

ICD 23300 — 30”

• DIMENSIONS Width: Depth: Height:

382 mm / 15.00 inches 584 mm / 23.00 inches 848 mm / 33.38 inches

584 mm / 23.00 inches 584 mm / 23.00 inches 920 mm / 36.22 inches

762 mm / 30.00 inches 584 mm / 23.00 inches 895 mm / 35.23 inches

• SPACE REQUIRED: Width: 382 mm / 15.00 inches Depth: 584 mm / 23.00 inches

• SPACE REQUIRED: Width: 584 mm / 23.00 inches Depth: 584 mm / 23.00 inches

• SPACE REQUIRED: Width: 762 mm / 30.00 inches Depth: 584 mm / 23.00 inches

• ELECTRICAL: 24 VAC electrical system supplied using 230 v transformer

• WEIGHT: Ice capacity: 27 kg / 59,5 pounds Shipping weight: 66 kg / 145 pounds

• WEIGHT: Ice capacity: 45 kg / 99,2 pounds Shipping weight: 118 kg / 260,1 pounds

• WEIGHT: Ice capacity: 59 kg / 130 pounds Shipping weight: 125 kg / 275,6 pounds

• FITTINGS: Soda inlets: 9.5 mm / 3/8 inches male barb Syrup inlets: 9.5 mm / 3/8 inches male barb

• ValveS: LEV® other valves available upon request

• FLEX MANIFOLD CONFIGURATION: Soda/pw 5 valve: 3-1-1 or 6 valve 3-2-1

• FLEX MANIFOLD CONFIGURATION: Soda/pw 6 valve: 3-1-2 or 8 valve 3-2-3

• FLEX MANIFOLD CONFIGURATION: Soda/pw 8 valve: 3-1-1-3 or 10 valve 3-2-1-1-3

• KEY LOCK SWITCH

•

DRAW PERFORMANCE: Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 6 drinks/min: 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

DRAW PERFORMANCE: Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 10 drinks/min. 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

DRAW PERFORMANCE: Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 15 drinks/min. 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

Options • Marquee

• Merchadiser

• Splash Guards and power supply

ICD Series Spec Sheet 12/16

Bevariety

Bevariety Above Counter Ice Beverage Dispensers. The Lancer BevarietyTM ACIB series offers 22”, 30” and 44” dispensers. The dispenser is designed to offer limitless variety and unsurpassed drink quality-all on one dispenser. Reliability and easy maintenance are also hallmarks of the BevarietyTM ACIB.

Features: • Cold carbonation for consistently better drink quality and colder drinks. • Multi-Valve Unit (MVU) offers 10-brand on 22”, 12 brand on 30” and 20 brand capability on 44” footprint. • New multi-flavor nozzle design provides enhanced pour performance. • Flexibility between multiflavor and LEV valve options (2 valve positions). • 2-brand ambient product capability. • Illuminated easily interchangeable merchandiser. • Merchandiser graphic panels compatible with Lancer IBD product. • Large capacity removable drip tray and cup rest. • Carb/non-carb flexibility: 2 LEV positions, 2 MVU positions. • Additional merchandising space for unique messaging on MVU.

www.lancereurope.com

Bevariety ACIB ACIB — 22” • DIMENSIONS Width: Depth: Height:

ACIB — 30” • DIMENSIONS Width: Depth: Height:

ACIB — 44” 762 mm / 30.00 inches 787 mm / 30.00 inches 902 mm / 35.50 inches

• DIMENSIONS Width: 1.117 mm / 44.00 inches Depth: 787 mm / 30.00 inches Height: 902 mm / 35.50 inches

• SPACE REQUIRED: Width: 600 mm / 22,5 inches Depth: 800 mm / 30,5 inches

• SPACE REQUIRED: ??? Width: ?? mm / 30,5 inches Depth: 800 mm / 30,5 inches

• SPACE REQUIRED: ??? Width: 1.130 mm / 44,5 inches Depth: 800 mm / 30,5 inches

• ELECTRICAL: 230VAC/50Hz, 3 AMPs

• WEIGHT: Ice capacity: 68 kg / 150 pounds Shipping weight: 122 kg / 268 pounds

• WEIGHT: Ice capacity: 113 kg / 250 pounds Shipping weight: 262 kg / 577 pounds

• WEIGHT: Ice capacity: 150 kg / 330 pounds Shipping weight: ?? kg / ?? pounds

• FITTINGS: Soda inlets: 9.5 mm / 3/8 inches male barb Syrup inlets: 9.5 mm / 3/8 inches male barb

• ValveS: ??? LEV® other valves available upon request

• FLEX MANIFOLD CONFIGURATION: Soda/pw 5 valve: 3-1-1 or 6 valve 3-2-1

• FLEX MANIFOLD CONFIGURATION: Soda/pw 6 valve: 3-1-2 or 8 valve 3-2-3

• FLEX MANIFOLD CONFIGURATION: Soda/pw 8 valve: 3-1-1-3 or 10 valve 3-2-1-1-3

• WATER: Filtered water 3.4 bar / 50 Psi.

•

559 mm / 22.00 inches 787 mm / 30.00 inches 902 mm / 35.50 inches

DRAW PERFORMANCE: Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 12 drinks/min. 350 ml (12 oz) 32 °C / 90 °F ambient temperature 8 drinks/min. 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

DRAW PERFORMANCE: Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 12 drinks/min. 350 ml (12 oz) 32 °C / 90 °F ambient temperature 8 drinks/min. 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

DRAW PERFORMANCE: Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 12 drinks/min. 350 ml (12 oz) 32 °C / 90 °F ambient temperature 8 drinks/min. 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

4 valves version 22”

ACIB Series Spec Sheet 12/16

4400 ID Ice Dispenser SPECIFICATIONS ID — 22” • DIMENSIONS Width: Depth: Height: Shipping weight: Ice capacity: Counterweight:

559 mm / 22.00 inches 775 mm / 30.50 inches (incl. drip tray) 864 mm / 34.00 inches 77 kg / 169 pounds 82 kg / 180 pounds 64 kg / 141 pounds (without ice)

• ELECTRICAL requirements: 230V/50Hz Optional: 230V/60Hz or 115V/60Hz

SPECIFICATIONS ID — 30” • DIMENSIONS Width: Depth: Height: Shipping weight: Ice capacity: Counterweight:

4400 Ice Dispenser.

775 mm / 30.00 inches 775 mm / 30.50 inches (incl. drip tray) 864 mm / 34.00 inches 90 kg / 189 pounds 13 kg / 49 pounds 79 kg / 174 pounds (without ice)

• ELECTRICAL requirements: 230V/50Hz Optional: 230V/60Hz or 115V/60Hz

The LANCER 4400 ID is Lancer’s n° 1 selling self-serve Ice dispenser. Topped with a compelling wrap-around display, the ID is a favorite of our customers.

Features: • Front serviceability. • Variable ice agitation. • Stainless steel construction. • Push and lever ice dispensing versatility. • Low ice sensing with visual indicator. • Illuminated interchangeable graphics. • Available in 22” and 30”.

*Based on internal testing, under equivalent conditions, a Coca-Cola BevarietyTM (Lancer model 85-2308C-122-07 Coca-Cola Legacy - (Lancer model 85-2378T-122-01) and Pepsi Intellicarb (IMI Cornelius model CB23223AHFK8)

ID 4400 Series Spec Sheet 09/16

www.lancereurope.com

Bar Bridge

Crew Serve Beverage Dispenser with HD screen.

The new Bar Bridge made by Lancer is a unique way to offer customers 6 brand and 4 bonus flavours choices with one nozzle and small dimensions. Easy to install with two simple clamps and Lancer newest technology that assures an accurate and reliable performance. Attractive Coca-Cola bottle design, equiped with a HD interactiv screen that reacts to the brand poured, customizable by request.

Features: • HD screen for the customer • Up to 6 brand and 4 bonus flavours • Easy clamp on feature, no counter drilling • Small footprint • Customized graphics • Exterior design exclusive for Coca-Cola • Lancer Flow Control Valves • Touchpad with portion control for the crew

www.lancereurope.com

Bar Bridge

CONFIGURATIONS • (1) Plain water • (1) Carbonated water • (6) Brands (can have 4 flavour adds) or • (8) Brands (can have 2 flavour adds) • Crew serve (Portion control)

Bar Bridge Spec Sheet 12/16

Bridge Tower

Touch Screen Beverage Dispenser.

Modern, engaging and elegant the Bridge Tower is the new Coca-Cola icon touchscreen tower capable to offer your customers a large variety of brands and bonus flavour combinations. Designed for Coca-Cola exclusively, this interactive self-service tower will certainly catch the customer’s attention: capable to pour up to 6 brands and 4 bonus flavours with one nozzle, touch screen for customer interaction, it serves a drink by touching the brand on the screen. Coca-Cola bottle shape and Lancer reliable technology all in one unit, unbeatable.

Features: • Exterior design of Coca-Cola classic bottle. • Small footprint • Touch screen for customer interaction or crew serve feature (option: mode) • Customizable graphics • Up to 6 or 8 brand and 2 or 4 bonus flavours • State of the art electronics • Lancer Flow Control Valves

www.lancereurope.com

Bridge Tower SPECIFICATIONS • DIMENSIONS Width: Depth: Height:

352 mm / 12,80 inches 439 mm / 17,30 inches 610 mm / 24,00 inches

• ELECTRICAL requirements: 110-230 VAC / 50/60Hz and 2.0 Amps • SHIPPING WEIGHT: 18.1 kg / 40lbs • FITTINGS: Water inlet: Syrup inlet:

9.5 mm / 3/8“ male barb 9.5 mm / 3/8“ male barb

• VALVES: Lancer Flow Control Valves • FLOWRATE: 45-60 ml/sec / 1.5-2.0 oz/sec • AUXILLARY Chiller

CONFIGURATIONS • • • •

(1) Plain water (1) Carbonated water (1) Mid-care optional (6) Brands (can have 4 flavour adds)

or • (8) Brands (can have 2 flavour adds) • Self-serve & Crew serve (Portion control) Mid carb lines, premix lines, plain water lines.

Bridge Tower Spec Sheet 12/16

CED 9000 Delta lll

Standard Cabinet

Units that are space efficient and cost effective.

The CED 9000 (Delta III) is designed using the highest quality materials and state-of-the-art technology providing our customers with consistent drink quality.

Features: • Stainless Steel cabinet, water bath, product lines; removable refrigeration deck. • Available with 5 or 6 post-mix dispensing valves. • All valves can be serviced independently. • Insulation is CFC-free, 0 GWP (Global Warming Potential) structural foam. • Multiple non-carbonated drinks available through adjustable valve back block technology on 3 positions. • Consistent cold carbonation for improved drink quality. • Syrup and water are accessible from the rear of cabinet. • Compressor start delay protection. • Full wrap around merchandising. • Shrouded cabinet with illuminated graphics available. • Fully louvered top provides air circulation for more efficient operation. • Interchangable refrigeratio deck. Possible options: R134A, R744, R290.

www.lancereurope.com

DELTA lll • DIMENSIONS Width: Depth: Height:

429 mm / 16.88 inches 649 mm / 25.78 inches 657 mm / 27.86 inches

•

ELECTRICAL requirements: 230VAC/50Hz, 4.5 AMPs 230VAC/60Hz, 4.5 AMPs 115VAC/60Hz, 9 AMPs

•

WEIGHT: Empty: Operating: Shipping:

66.2 kg 108 kg 73 kg

• ICE: Capacity: 11,3 - 12,7 kg • FITTINGS: Water inlets: Syrup inlets:

9.5 mm / 3/8“ male barb 9.5 mm / 3/8“ male barb

• VALVES: LEV® other valves available upon reques • FLEX MANIFOLD CONFIGURATION: 5 Valve: 3-2 — 6 Valve: 3-3 • KEY LOCK SWITCH • COMPRESSOR: 1/3 hp • MOTORS: Agitator: 25 w Condenser fan: 9 w • ICE BANK CONTROL: Lancer Electronic Ice Bank Control • TRANSFORMER: 24VAC secondary • WATER: capacity: 42 l • DRAW PERFORMANCE: Number of drinks below 4,4 °C / 40 °F. 32 °C / 90 °F ambient temperature 2/350 ml (12 oz) drinks/min. — 125 drinks 4/350 ml (12 oz) drinks/min. — 97 drinks

Shrouded Cabinet with Lighted Marquee

40 °C / 105 °F ambient temperature 2/350 ml (12 oz) drinks/min. — 115 drinks 4/350 ml (12 oz) drinks/min. — 92 drinks Condition D approved.

DELT lll Spec Sheet 12/16

CED 2500

Monarch, the High Performance Dispenser.

The CED 2500 (Monarch) is designed using the highest quality materials and state-of-the-art technology providing our customers with consistent drink quality.

Features: • Post-Mix, 6 or 8 valves. • All valves can be serviced independently from the front. • 25 kg / 55 pounds ice bank, flooded manifold. • 360° graphics increases brand awareness for improved beverage sales. • Insulation is CFC-free, (0 Global Warming Potential structural foam). • Carb to non-carb changeover possible on 3 valves. • Designed for superior performance, reliability and ease of serviceability. • Lancer Volumetric Valve provides continuous, accurate brix ratio control. • Lancer electronic ice bank control technology. • Removable refrigeration deck reduces service time and cost. • Compressor start delay protection against electrical supply fluctuations. • Stainless Steel cabinet, water bath, product lines and drip tray assembly • R134A Refrigerant.

www.lancereurope.com

CED 2500 • DIMENSIONS Width: Depth: Height:

660 mm / 26.00 inches 686 mm / 27.00 inches 794 mm / 31.25 inches

• ELECTRICAL requirements: 230V, 50Hz, or 220V, 60Hz, 7.5 A UL grounded cord and plug. • WEIGHT: Operating: Shipping:

217 kg / 479 pounds 136 kg / 300 pounds

• ICE: Capacity: 25 kg / 55,1 pounds • FITTINGS: Stainless steel, labeled inlet Water inlets: 9.5 mm / 3/8“ male barb Syrup inlets: 9.5 mm / 3/8“ male barb • VALVES: LEV® standard CED 2500 Front Marquee

• FLEX MANIFOLD CONFIGURATION: 6 LEV® 3-2-1 with plain water option on 3, 4, & 5 8 LEV® 3-1-1-3 with plain water option on 4 & 5 • KEY LOCK SWITCH ?????? • COMPRESSOR: 3/4 Hp • MOTORS: Agitator: 25 w Condenser fan: 35 w • ICE BANK CONTROL: Lancer Electronic Ice Bank Control • TRANSFORMER: 24VAC secondary • WATER BatH: capacity: 95 liters / 21 gallons • DRAW PERFORMANCE: Number of drinks below 4,4 °C / 40 °F. 24 °C / 75 °F ambient temperature 2/350 ml (12 oz) drinks/min. — indefinite 4/350 ml (12 oz) drinks/min. — 538 drinks 32 °C / 90 °F ambient temperature 2/350 ml (12 oz) drinks/min. — 308 drinks 4/350 ml (12 oz) drinks/min. — 156 drinks Full recovery of ice bank requires about 2.5 hours. • Warranty: For warranty specifics by product, contact your Lancer Sales representatives.

CED 2500 Spec Sheet 12/16

CED 8000

The High Performance counter electric dispenser with cold carbonation. The CED 8000 is designed using the highest quality materials and state-of-the-art technology providing our customers with consistent drink quality.

Features: • Post-Mix, 6 or 8 valves. • All valves can be serviced independently from the front. • Built-in Lancer cold carbonator with electronic level control. • Meets climate condition C criteria. • 360° graphics increases brand awareness for improved beverage sales. • Insulation is CFC-free, 0 GWP (Global Warming Potential) structural foam. • Carb to non-carb changeover possible on 3 valves. • Designed for superior performance, reliability and ease of serviceability. • Lancer Volumetric Valve provides continuous, accurate brix ratio control. • Lancer electronic ice bank control technology. • Removable refrigeration deck reduces service time and cost. • Air filtered Condenser (filter easy removable for cleaning). • Compressor start delay protection against electrical supply fluctuations. • Stainless Steel cabinet, water bath, product lines and drip tray assembly.

www.lancereurope.com

CED 8000 • DIMENSIONS Width: 610 mm / 24.00 inches Depth: (incl drip tray) 727 mm / 28 5/8 inches Height: 778 mm / 30 5/8 inches • ELECTRICAL requirements: Mains: 230V/50Hz/1 Ph Run current: 7.0 Ampere Other: 220V/60Hz, 115V/60Hz • WEIGHT: Empty: Operating: Shipping:

135 kg / 297,6 pounds 223 kg / 491,6 pounds 145 kg / 319,7 pounds

• ICE: Capacity: 25 kg / 55,1 pounds

Removable Filter Detail.

• ValveS: 6 or 8 LANCER LEV® or volumetric valves • Refrigeration: Compressor size: 3/4 HP Refrigerant: R-134a Condenser type: copper / aluminium Control device: capillary tube • CarbonatOR co2 pressure: 5.17 bar / 75 Psi • CarbonatOR pump: 100 GHP / 360 litre per hr • Continuous Drink Capacity: 120 cups/hr – 350 ml / 12 oz drinks under 4.4 °C / 39 °F 24 °C / 75 °F ambient, inlet water and syrup • Peak Drink Capacity: 2/350 ml (12 oz) drinks at 24 °C / 75 °F: indefinite 4/350 ml (12 oz) drinks at 24 °C / 75 °F: indefinite Pull down time at 24 °C / 75 °F = 2:30 hr Recovery time at 24 °C / 75 °F = 1:45 hr • WATER Bath: Volume: 76 l / 20 gallons • WATER Pressure: 1.72 - 3.45 bar (25-50 Psi)

CED 8000 Spec Sheet 12/16

UNICORN

Frozen Profit

The Unicorn Post Mix dispenser is a dream come true. Designed with a sleek retro look, the Unicorn font adds character and style to your bar or restaurant dining experience. Learn more about Lancer’s newest innovative product at lancercorp.com.

Features: • • • • • • •

Self contained, sleek design creates a small footprint with flexible clamp-on or through bar mounting. Pinpoint accuracy that is better than a bar gun with portion control, or manual pour for server convenience. Features Lancer flow control technology (no volumetric). Small footprint. Portion Control or manual pour. Illuminated Branding “customer view” possible. Dispensing Solutions that Pour More

www.lancereurope.com

UNICORN •

DIMENSIONS Width: 230 mm / 9 inches Depth: 300 mm / 12 inches Clamp on height: 690 mm / 27 inches Through counter mounting: 640 mm / 25 inches Total height: 960 mm / 38 inches

• ELECTRICAL requirements: 24 VAC 50/60 Hz • WEIGHT: Clamp on 15 kg / 33 pounds • Finished drinks Flow Rates: 88 ml/sec 3.00 oz/sec 66 ml/sec 2.25 oz/sec 44 ml/sec 1.50 oz/sec • FITTINGS: Soda inlets: Syrup inlets:

9.5 mm / 3/8“ male barb 9.5 mm / 3/8“ male barb

• Pressure REQUIREMENTS: Water Minimum flow pressure: 2.8 bar / 40 psi Maximum flow pressure: 7.7 bar / 110 psi

Syrup Minimum flow pressure: (sugar): 1.4 bar / 20 psi Minimum flow pressure: (diet): 0.7 bar / 10 psi Maximum flow pressure: (sugar): 4.9 bar / 70 psi Maximum flow pressure: (diet): 4.9 bar / 40 psi

UNICORN Spec Sheet 12/16

Tower Model 300

Island based Stainlass Steel Towers.

The Lancer BevarietyTM ACIB series offers 22”, 30” and 44” dispensers. The dispenser is designed to offer limitless variety and unsurpassed drink quality-all on one dispenser. Reliability and easy maintenance are also hallmarks of the BevarietyTM ACIB.

Features: • Insulation is CFC and HFC-free structural foam. • • • • •

Optional maerchandiser and marquee available on the 18” and 233 towersl. Island base dispensing towers. Stainless steel construction). All valves can be serviced independently. Designed for crew serve.

www.lancereurope.com

Stainless Steel Towers Model 300: Island Base Stainless Steel Tower: 1, 2, 5, 6 or 8 valves

SST — 7,5” (1 or 2 valves)

SST — 18” (5 or 6 valves)

SST — 23” (6 or 8 valves)

• DIMENSIONS Width: Depth: Height:

191 mm / 7.50 inches 235 mm / 9.25 inches (incl. drip tray) 419 mm / 16.49 inches

• WEIGHT: Shipping weight:

470 mm / 18.50 inches 367 mm / 14.44 inches (incl. drip tray) 406 mm / 15.98 inches

597 mm / 23.50 inches 349 mm / 13.74 inches (incl. drip tray) 406 mm / 15.98 inches

• WEIGHT: Shipping weight: 17 kg / 37.40 pounds

• WEIGHT: Shipping weight: 19 kg / 41.88 pounds

• FITTINGS: Soda inlets: 9.5 mm / 3/8 inches male barb Syrup inlets: 9.5 mm / 3/8 inches male barb

• ValveS: LEV® other valves available upon request

• KEY Lock Switch: Standard with LEV® valves

• Power Supply: included

•

7 kg / 15,4 pounds

DRAW PERFORMANCE: ??? Number of drinks below 4,4 °C / 39 °F. 24 °C / 75 °F ambient temperature 12 drinks/min. 350 ml (12 oz) 32 °C / 90 °F ambient temperature 8 drinks/min. 350 ml (12 oz)

Units can supply drinks under 4,4 °C / 39 °F. ` at rated draw performance continuously as long as ice is kept on cold plate.

Options

Ask for our competitively priced spare parts.

Tower Model 300 Spec Sheet 12/16

Flavor Craze

Stainless Steel MVU Dispensing Tower.

The Lancer new Flavor Craze Tower is an ideal way to offer customers a flavor shot capable dispenser in a very small footprint. It is a small Multi Valve Unit with one nozzle, the state of the art technology is made with the highest quality materials and provides a unique drink experience. The tower not only offers the possibility of adding Flavor Shots to your drink, it also gives the possibility to choose between carbonated or non carbonated drinks.

Features: • Multi Valve Unit expands brand variety to six dispensable flavors in the same space as two LEV’s. • Hard plumbed stainless steel tower (SS tubes). • All-stainless, highly cleanable surfaces with no exposed insulation. • Island based dispensing tower. • Designed for easy installation. • Standard high quality LEV flow control technology. • Programmable Portion Control with top off option. • Shot size programming. • Keylock switch.

www.lancereurope.com

Flavor Craze • DIMENSIONS Width: 191 mm / 7.5 inches Depth: 235 mm / 9.25 inches Height: 960 mm / 38 inches • ELECTRICAL requirements: Tower: 24 VAC (transformer included) • SHIPPING WEIGHT: 7 kg / 15 lbs • FITTINGS: Soda inlets: Syrup inlets:

9.5 mm / 3/8“ male barb 9.5 mm / 3/8“ male barb

• VALVES: 1 1

Water flow control Soda flow control

• Pressure REQUIREMENTS: Water Minimum flow pressure: 2.8 bar / 40 psi Maximum flow pressure: 7.7 bar / 110 psi Syrup Minimum flow pressure: (sugar): 1.4 bar / 20 psi Minimum flow pressure: (diet): 0.7 bar / 10 psi Maximum flow pressure: (sugar): 4.9 bar / 70 psi Maximum flow pressure: (diet): 4.9 bar / 40 psi

FLAVOR CRAZE Spec Sheet 12/16

Bar Guns

Lancer introduces the Recirculation Bar Gun.

Features: • Meets Coca-Cola ratio standards for all current and new HCYS syrups at 44 ml / 1,5 ounces sec. finished drink flow. • Every Flow Control Module is tested and guaranteed to meet Coca-Cola ratio standards. • Ratio control from the front of flow control module allows much easier access. • Any flow control module can be easily changed in the field to fix orifice. • Tubing is all one size with larger ID than competition. • Tubing will not transmit pungent flavors to adjoining tubes. • Removal and re-installation of bottom plate on handle does not cause spring assembly to pop out and be lost. • All push buttons are interchangeable with competitors. • Improved nozzle assembly ensures no flavor carry-over, good cup stratification and carbonation. • Bar gun can be field converted to have one or more juice selections.

www.lancereurope.com

Bar Guns • Different Sheath Length DIMENSIONS • Standard lenghts: 910 mm / 36 inches 1.219 mm / 48 inches • OPTIONAL:

1.422 mm / 56 inches 1.822 mm / 72 inches 2.100 mm / 84 inches

• Pressure REQUIREMENTS: Water Minimum flow pressure: 2.8 bar / 40 psi Maximum flow pressure: 7.7 bar / 110 psi Syrup Minimum flow pressure: (sugar): 1.4 bar / 20 psi Maximum flow pressure: (sugar): 4.9 bar / 70 psi

Schroeder Bar Gun

Customized button configuration: 4 to 10 buttons. Premix and non-carbonated lines available.

Schroeder Bar Gun holder

Bar Guns Spec Sheet 12/16

Drop in Bar Gun

Drop in Post Mix Dispenser.

Simple tecnical solutions to guarantee the highest finished drink quality. Environmentally Friendly NO refrigeration system ensures low energy consumption. Easy install thanks to built in carbonator. Long life low service cost

Features: • • • • • • • • • • •

Drop-in equipped with built in carbonator reduces installation cost. Cold carbonation produces quality carbonated drinks. Plug-in bar gun design. Bar Gun with flow control assures efficient and stable ratio control. 27 kilogram / 60 LB Ice Bin, used for drinks and cooling. Easy to sanitize and service. Built in or free standing. Bar Gun can be removed without depressurizing the system. 6 brands plus soda and water. Totally self contained, no refrigeration required. Customized button configuration from 4 to 10 buttons. Premix and non-carbonated lines available.

www.lancereurope.com

Bar Gun Drop-in • DIMENSIONS Width: Depth: Height: Height:

381 mm / 15 inches 584 mm / 23 inches 533 mm / 21.75 inches (build in) 736 mm / 29.75 inches (Stand alone)

• Solid Stainless Steel construction 304 SS • Schroeder Bar Gun • No refrigeration required • ELECTRICAL requirements: 230V / 50hz • Pressure requirements: Water in: 3 Bar / 45 Psi . CO2 in: 5,5 Bar / 80 Psi . • WEIGHT: Empty: Operating: Shipping:

?? kg / 82 pounds ?? kg / 127 pounds ?? kg / 110 pounds

• Fittings: 3/8 Barb water inlet. 3/8 Barb syrup inlet. Schroeder Bar Gun

• Fittings: 3/8 Barb water inlet. 3/8 Barb syrup inlet.

Bar Gun Drop-in Spec Sheet 12/16

Spartan

Spartan • DIMENSIONS Width: 399 mm / 15.7 inches Depth: 711,2 mm / 28 inches Height: 548.6 mm / 21.6 inches • ELECTRICAL requirements: 115V/60hz 220V/60hz 230V/50hz • WEIGHT: Empty: Operating: Shipping:

37,2 kg / 82 pounds 57,6 kg / 127 pounds 49,9 kg / 110 pounds

• ValveS: LEV® other valves available upon request • • • •

Refrigeration: Compressor: Hermetic reciprocating Refrigerant: R-134a ICE BANK CONTROL: Lancer Electronic Ice Bank Control ICE BANK SIZE: 3.6-5.0 kg / 8-11 pounds Options: Leg kit

Spartan Beverage Dispenser.

Introducing Lancer’s new Spartan beverage dispenser. This compact and versatile dispenser is designed using the highest quality materials to provide our customers with consistent drink quality.

Features: • • • • • • • • • •

Modular design allows for multiple configurations Available with 2, 3 or 4 post-mix dispensing valves Chiller configuration available Insulation is CFC-free, 0 GWP (Global Warming Potential) structural foam Optional non-carbonated valve available through adjustable valve back block technology Built-in plain water booster (optional) Consistent cold carbonation for improved drink quality Shrouded cabinet assembly with various graphic options Fully louvered top provides air circulation for more efficient operation R134A Refrigerant, Optional refrigeration systems available in 2014 ??????

www.lancereurope.com

Slim Line Towers

The High Polished Stainless Steel Slim Line Dispensing Tower. Our Bullet Towers are custom made to suit you. They can be produced in single or dual valve tower configurations, or as a bank of towers with a custom made drip tray. Bullet Towers are a great alternative to traditional shaped Soft Drink towers. Simulating the appearance of a beer fount with a high polished stainless steel finish creates an appealing on-counter Soft Drink solution. The Bullet Towers are easy to use for consumers in a self-service application.

Features: • • • •

Single or Dual valve Soft Drink towers Available in high polished stainless steel Decals are angled for high visual impact 100 mm (4 inch) diameter ?????

Options: • • • •

LEV or Flomatic valves Single or multiple bank drip trays available Decals available with illumination Custom made dimensions upon request

www.lancereurope.com

Slim Line • DIMENSIONS ???????? Width: 191 mm / 7.5 inches Depth: 235 mm / 9.25 inches Height: 960 mm / 38 inches • ELECTRICAL requirements: Tower: 24 VAC (transformer included) • SHIPPING WEIGHT: 7 kg / 15 lbs • FITTINGS: Soda inlets: Syrup inlets:

9.5 mm / 3/8“ male barb 9.5 mm / 3/8“ male barb

• VALVES: 1 1

Water flow control Soda flow control

• Pressure REQUIREMENTS: ??????? Water Minimum flow pressure: 2.8 bar / 40 psi Maximum flow pressure: 7.7 bar / 110 psi Syrup Minimum flow pressure: (sugar): 1.4 bar / 20 psi Minimum flow pressure: (diet): 0.7 bar / 10 psi Maximum flow pressure: (sugar): 4.9 bar / 70 psi Maximum flow pressure: (diet): 4.9 bar / 40 psi

Slim Line Towers Spec Sheet 12/16

LEV Electric Valve ®

Push Button

Portion Control

Crew Serve

Self Serve Easy Fill

Lancer Electric Valve.

The LEV® is the best in class and best selling valve on the market. It is built with the highest quality materials and proven technology to provide our customers with consistent drink quality and reliability.

Features: • • • • • • •

Over six million valves produced since 1987 Available in 3 and 4.5 oz/second flow rates Consistent “Best in Class” performance Lowest “Life Cost” of operation available Simple design gives high reliability Widest range of ratio control (2:1 - 10:1) Dispensing Solutions that

www.lancereurope.com

LEV Valves ®

Options

•

OPTIONS

Nozzle

PRESSURE REQUIREMENTS (FLOWING PRESSURE) Water: 40 - 110 psig (2.8 - 7.7 bar) Syrup (Sugar): 20 - 70 psig (1.4 - 4.9 bar) Syrup (Diet/Light): 10 - 70 psig (0.7 - 4.9 bar)

• DRINK FLOW RATES LEV 3.0: 1.5 oz/s - 3.0 oz/s (44.4 ml/s – 88.8 ml/s) LEV 4.5: 2.5 oz/s - 4.5 ox/s (73.9 ml/s – 133.1 ml/s)

Syrup Separator Nozzle

• RATIO ADJUSTMENT RANGE: 2.0 - 10.0 Water/Syrup by Volume (dependent on finished drink flow rate)

Front Water Lever

Diffuser

Bare Valve

• ELECTRICAL REQUIREMENTS: 24V, 50/60 Hz •

MOUNTING Uses LEV® Mounting Block – LEV® mounting block has the same mounting screw hole pattern as the following: • Dole SEV • Dole FFV • Cornelius UF1, SF1 • McCann Turbo Flo Jr.

Electric Valve Spec Sheet 12/16

LVV Volumetric Valve ®

Push Button Portion Control

Crew Serve

Self Serve

VOLUMETRIC VALVES.

The Volumetric Valve is built with the highest quality materials and advanced technology providing our customers with consistent drink quality.

Features: • • • • •

Over 500,000 Lancer Volumetric Valves in the market Consistent “Best in Class” performance Lancer Volumetric Valves using volumetric metering give accurate ratio over life of valve Once set, no adjustment A Lancer valve designed for Coca-Cola® to be the benchmark for other valves

www.lancereurope.com

LVV Valves ®

Options

Flow Controls

Water Button

Programmer

•

PRESSURE REQUIREMENTS (FLOWING PRESSURE) Water: 40 - 110 psig (2.8 - 7.7 bar) Syrup (Sugar): 20 - 70 psig (1.4 - 4.9 bar) Syrup (Diet/Light): 10 - 70 psig (0.7 - 4.9 bar)

•

DRINK FLOW RATES 3.0 oz/s (90 ml/s) (Grey flow washer assembly) 2.3 oz/s (68 ml/s) (White flow washer assembly) 1.5 oz/s (45 ml/s) (Red flow washer assembly)

• RATIO ADJUSTMENT RANGE: 2.0 - 10.0 Water/Syrup by Volume (dependent on finished drink flow rate)

Syrup Separator Nozzle

Bare Valve

• ELECTRICAL REQUIREMENTS: 24V, 50/60 Hz •

MOUNTING Uses LEV® Mounting Block LEV® mounting block has the same mounting screw hole pattern as the following: • Dole SEV • Dole FFV • Cornelius UF1, SF1 • McCann Turbo Flo Jr.

LVV Spec Sheet 12/16

Beverage Solutions Program for Coca Cola Clients

LANCER Sales, Warehousing & Distribution Mechelsesteenweg 592, B-1930 Nossegem Belgium Office: 0032 (0)2 755 23 90 E-mail: info@lancereurope.com

LANCER Research & Development Unit 8-9 Prosperity Court, Middlewich, Midpoint 18 CW10 OGD Chesire, United Kingdom Office: +44 (0)1606 837 711

LANCER Europe Representatives Paul Haskayne, Managing Director:

+44 7739 180199

Jaap van Ginneken, Business Development Director:

+32 495 265 645

Vladimir Demkin, Sales Manager CIS:

+7 495 991 7778

Jose-Luis Vargas, Sales Manager Iberia:

+34 609 305 683

Peter Bodolai, Sales Manager C-Europe:

+36 30 343 3277

Neil Fischer, Sales Consultant:

+44 7772 308172

Zoltan Mehes, Market Development & Sales Manager Central/South Europe

+40 726 756 657

Shabbir Shafiqui, Regional Manager Middle East and India Subcontinent

+91-9867554152

Sergio López Oporto, Sales engineer:

+32 472 322 671