March 2015
1
HYNEWS Unique AFC technology
Eclipse. The only TRV to hatch a Bearded Dragon’s egg. In order to hatch successfully, the egg of the Bearded Dragon needs to be kept at a regulated temperature. This would be a tough challenge for a standard radiator valve, but thankfully, our little egg needn’t worry as the new Eclipse TRV is carefully balancing its temperature. >> Read more on page 2
Eclipse Proven Automatic Flow Control now for even more applications
Connected pressurisation and Degassing >> page 2
with remote monitoring and vacuum degassing >> page 4
TA-Compact-P Take control of your comfort and high energy efficiency with the new pressure independent and balancing valve (PIBCV). >> page 6
2
March 2015
Eclipse The only TRV to hatch a Bearded Dragon’s egg.
Now you can make your customers as happy as Max, the dragon. Thanks to its unique AFC technology, Advantages of Eclipse with Automatic Flow Control Eclipse ensures that the requested room temperature is reached every Our new TRV: time. By regulating the maximum flow > Is the smallest automatic TRV on the market > Offers a precisely balanced system which improves irrespective of the differential pressure, radiator and boiler efficiency > Means there’s no need to make separate complicated a well balanced system is guaranteed calculations only by adjusting the flow directly on > Maintains the correct flow with reduced noise the valve and without any complex > Is backed by our money back guarantee - if you’re not satisfied you can return it to the point of purchase and piping calculations. get your money back (yes, as simple as that!).
Find out more about the new Eclipse TRV from IMI Heimeier at eclipsetrv.com
Eclipse: Thermostatic valve with automatic flow control for standard radiators
For bathroom and design radiators: Multilux 4-Eclipse-Set and Multilux Eclipse
For radiators with integrated valves: Vekotec Eclipse and Eclipse thermostatic inserts
The thermostatic radiator valve Eclipse has a unique integrated flow limiter which eliminates over flows. The required flow rate can be adjusted directly at the valve with a twist. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary.
Multilux Eclipse with automatic flow control is connected in 2-pipe systems to radiators with a lower 2-point connection such as bathroom radiators, design radiators, universal radiators or radiators with integrated valves.
The Vekotec Eclipse double connection fitting is designed for installation in radiators with integrated valves with an Rp 1/2 female thread and G 3/4 male thread with automatic flow control. Self sealing connections enable easy installation in the radiator.
Key features: > Integrated flow limiter eliminates over flows > Easy adjustment: just a twist to reach design flow > Flow range from 10 to 150 l/ h for high flexibility > Perfect for renovation: standard dimensions and easy flow sizing > All valve bodies with II+ marking can be retrofitted as Eclipse i.e. V-exact II, Standard, Multilux, Multilux 4-Set
Eclipse for standard radiators
Multilux 4-Eclipse-Set
Key Features: > Thermostatic insert and shut-off insert are interchangeable, so valve is suitable for installation on both left and right sides of the radiator > Centre to centre distance of connections is 50mm > Cover for angle and straight forms in white and chrome available > Easy draining off and filling Multilux 4-Eclipse Set is the design edition and suitable for installation in angled or straight forms for pipe conenctions into the wall or vertically into the floor, for R 1/2 and G 3/4 connection. The thermostatic head DX is included in the set.
Multilux Eclipse
Angle and straight version sof the valves, designed for two-pipe systems, mean that the connection fitting can be used in a number of different ways. A cover for both angled and straight forms, white or chrome available. Supply and return pipes can be shut-off separately. Flow control insert and shut-off insert are interchangeable, therefore the valve is suitable for installation on both left and right sides of the radiator.
Vekotec Eclipse
March 2015
3
The Technology that Makes Eclipse Truly Unique. The proven valve insert for automatic flow control (AFC), developed and patented by IMI Heimeier, controls the maximum flow rate, independent of the pressure at the valve.
Installed directly at the heating unit, the innovative valve insert ensures that, once it is set, the flow rate is never exceeded. As a result, no complex calculations on system differential pressure and flow, normally necessary for hydraulic balancing are no longer
essential, since the valve insert automatically reduces any excess pressure and only allows hot water into the radiator or heating circuit in compliance with the original setting.
CALYPSO exact A new thermostatic body with stepless precision presetting An evolution in the drive towards heating flexibility, ease and comfort
precise silent long-lasting
Raditec Return lockshield, radiator lockshield The Raditec lockshield is used in pumped warm water heating and air conditioning systems. Versions with female thread from DN 10 to DN 15 in angle and straight forms make the threaded connection suitable for versatile and varied applications. It enables individual shut-off, for example of radiators, so that decorating and service work can be carried out without interruption to the operation of other radiators. A special combination of shut-off/regulation cone and valve seat enables it to be used as a shut-off fitting as well as for hydraulic balancing. At the same time, the aim of supplying all heaters with hot water according to their requirement is met. Key features: > Easy to operate with an Allen key size 8 AF > Presettable by means of shut-off and regulation cone
Every aspect of the CALYPSO exact thermostatic valve design has been developed and refined to enable precise thermostatic control so that customers can always enjoy a superb indoor climate. CALYPSO exact is a better match with all heating systems whether they are new systems or part of a renovation project because it allows for broader flow ranges while keeping noise levels down. It is designed for two-pipe pumped hot water systems with a normal to high temperature spread as well as cooling systems. It handles temperatures ranging from -10°C up to 120°C – with a protection cap or actuator up to 100°C, or a press connection up to 110°C.
IMI Heimeier Quality advantages: > Optimised noise behaviour through specially designed setting > High flow range for various applications > Double O-ring seal for durable and maintenance free operation > Strong return spring in combination with high locating force ensures that the valve does not slacken off over time > Valve body made of brass > Precise regulating part for accurate stepless presetting > IMI Heimeier M30x1.5 connection technology > Upper section replaceable using the fitting tool without draining the system
Thermostatic head D-U
Thermostatic heads with built-in sensor The thermostatic head D-U is used to control the temperature of individual rooms using, where heaters, convectors or radiators have been installed. Key features: > Liquid filled sensor element for higher closing power, reduced maintenance costs and trouble-free operation. > Temperature limitation: Set maximum and minimum temperatures, helping to reduce running costs. > Stable control behaviour even in the case of small calculated p-band variation (<1K). > Reduced size in length and diameter. > Designed to be mounted on all IMI Heimeier thermostatic valve bodies and radiators with integrated valves which have an M 30 x 1.5 thermostatic insert.
4
March 2015
Transfero Connect and Vento Connect Two new products to maintain pressure and degas your HVAC system, both with integrated vacuum degassing Our new high performance precision pressurisation system with one or two pumps – Transfero Connect, and our new pressure step degasser Vento Connect, now offer a remote monitoring function for heating, solar and chilled water systems. Last year we launched the Compresso Connect, a high performance precision pressurisation system with compressors and remote monitoring functionality. This year, we add two brand new products to the range: the Transfero Connect and the Vento Connect. The Transfero Connect allows you to control your pressurisation system remotely wherever you are, through live viewing, from any device equipped with an internet connection. With integrated degassing technology in combination with modular water make-up devices, this product allows you to degas the makeup water down to an absolute minimum in order to minimise corrosion in the system caused by oxygen ingress. Suitable for use when compactness, precision pressurisation and high-efficiency vacuum degassing are required, the Transfero Connect comprises an expansion vessel and a new BrainCube Connect control panel for medium-sized systems up to 10 MW.
The Vento Connect is a pressure step degasser with one or two pumps. Suitable for use when high-efficiency vacuum degassing and remote control are required, the new Vento Connect comprises a vacuum vessel, optional modular water make-up devices and digital connectivity to the BMS for systems up to 200 m³. The gases are separated in a special vacuum vessel from the water, used in heating solar and cooling water systems to facilitate central venting and minimise corrosion. Both of these devices give you the comfort of knowing what is happening in your system wherever you are, allowing you to detect problems when they first appear. You can get standardised connections to BMS, remote access to all data, system analysis and data logging, and remote commissioning support. From now on, all you need to fully control your pressure maintenance or vacuum degassing system is a device equipped with an internet browser. A few features and benefits of the new Connect range > New user interface and improved design through Integrated BrainCube and TecBox > Resistant 3.5” TFT illuminated colour touch display > Standardised connections to BMS: RS485, Ethernet, USB > Periodic automatic self-test > Intuitive and user-friendly menu > Comfortable operation > Web-based interface with remote control and live view > Remote access, trouble-shooting and commissioning support, reducing the need for high-skilled staff to perform operations > Data logging for system performance checks
In addition the Transfero Connect and Vento Connect also offer: > Integrated Vacuum degassing function > Flexible system to connect water make-up units > Supervision of a decalcification or demineralisation cartridge > Control and monitoring of optional water make-up and water treatment modules > Easy commissioning > Individual operating mode of the system
March 2015
5
Zeparo Cyclone Dirt Performance
remaining dirt particles
Speed of Dirt Removal vs. Dirt Accumulation
Measured Separation Efficiency against Competitors
100%
50%
80%
40%
60%
30%
40%
20%
20%
10%
0%
0% 0
10
20
30
40
50
60
70
80
Flow
number of cycles
Competitor (std)
Zeparo Cyclone
Zeparo Cyclone
Competitor A
remaining dirt particles Competitor (std)
Competitor B
remaining dirt particles Zeparo Cyclone
Competitor C
High Performance Cyclone Dirt Separators now with Magnet Accessory! The Zeparo Cyclone Magnet is an ideal product to remove dirt such as sludge and magnetite (black iron oxide) deposits which consist of finer magnetic particles. The new Zeparo Cyclone Magnet and Insulation accessory combines the best of both worlds in a unique design. With magnets on the outer diameter aiding the cyclonic principle of the product, it is additionally equipped with insulation which greatly reduces heat losses. This powerful accessory can be installed on an existing Zeparo Cyclone without the need for draining. The Zeparo Cyclone Magnet removes dirt in heating and cooling systems much more quickly, easily and efficiently than ever before! The new standard for dirt separation is based on Cyclonic technology, which is set to revolutionise HVAC system maintenance due to its highly superior capacity for dirt removal, which is up to nine times more efficient than competitor devices. This is vital for critical components such as energy efficient boilers, pumps and valves. Dirt can also affect circulation and heat transfer, for example in radiators, leading to poor indoor climate. The removal of dirt ensures a longer life of the installation, lower maintenance costs as well as lower energy costs.
The features of the new Zeparo Cyclone Dirt Magnet: > High efficiency due to Cyclonic technology > Performs well at high temperatures up to 120°C due to special inner part compound (PPS) > High efficiency independent of dimension > Inline construction for easy installation and maintenance > PN10 Pressure rating > ¾” version can be directly connected to copper pipes (15, 18 and 22mm) with a compression coupling The benefits of the new Zeparo Cyclone Dirt Magnet: >C leans your system in fewer cycles (up to 9 times faster), each time reducing dirt particles that would normally deposit in the system with each additional cycle. > Ideal for all types of small and mid-sized installations up to 300 KW of power. > Protects your pump and other critical components of your heating system from dirt and magnetite. > No clogging risk. > Reduces maintenance of equipment needed over system lifetime and associated costs. > The magnet and insulation accessory prevents heat losses and protects the installation from the harmful effects of magnetite > Easy to install on an existing Zeparo Cyclone installation
Up to 9x more efficient dirt separation
6
March 2015
TA-Compact-P
Take control of your comfort!
Perfect temperature comfort does not necessarily mean a higher energy bill. It is all about the high energy efficiency of the entire system. To achieve this goal, you need a professional tool. TA-COMPACT-P controls temperature with extremely high accuracy and it is fully independent of system pressure fluctuation caused by other units. The new valve limits overflow and saves a vast amount of pumping energy. Hydronic balancing is simple and fast. A smart body with uni-directional access to all functions allows the parallel installation of two valves in small fan-coil units. Our actuators with high protection class IP 54 enable valve installation in all positions. Only a well commissioned system can provide the expected comfort while saving money. TA-Compact-P has a unique set of diagnostic capabilities to help you find the optimal setting point of pumps, find possible system failures and prove whether all terminal units are able to reach the desired performance. Measuring creates trust.
The main parts of the valve are made from IMI TA’s dezincification resistant alloy AMETAL® and stainless steel to guarantee premium longevity and reliable operation without additional service costs. High flow capacity makes the valve universal and flexible for use in heating and cooling applications. Very low pressure drop descreases operating costs and minimizes pump head.
Leave nothing to chance when it comes to perfect diagnostics TA-COMPACT-P is the only PIBCV on the market able to diagnose system by measuring: > flow > pressure drop > temperature > available differential pressure > power DN 10-32 Flow range: 22-3,700 l/h
Watch the film to learn more
March 2015
TA-Compact-T When your system malfunctions, your money simply flies away!
7
HyTools Everything you need for hydronic calculation in one app
The best solution for cooling systems using on-off control
With the HyTools app, HVAC professionals now have all the balancing, pressurising and radiator control tools they need right on their iPhone, iPod Touch or Android smartphone.
Correct return temperature in cooling systems is important Conventional solutions using two-way control valves with on-off control are not capable of ensuring the effective operation of terminal units because two-point control does not modulate flow according to the actual load. Overflows, lower airflow, dirty filters, low temperature setting on the thermostat - all have a negative impact on the return temperature. The consequences: > increased pumping costs > higher energy losses on piping > greater condensation in terminal units > lower energy efficiency of chillers
TA-COMPACT-T is the solution! TA-COMPACT-T is an on-off control valve with a return temperature controller to be used in return pipe. High energy efficiency is the main benefit of this new innovation. Setting of requested return temperature directly on the valve is easy. TA-COMPACT-T ensures that the requested return temperature will be kept under all system conditions.
The only on-off control valve with return temperature controller Your Benefits: > Limits overflows and saves pumping energy > Guarantees requested return temperature > Cost efficient solution > Significantly improves energy efficiency > Decreases energy losses on piping and by condensation
NEWS IN VERSION 1.2.4 > Density, kinematic viscosity and specific heat data added to the database for water, 2 glycols, 4 brines and 3 alcohols in function of the fluid temperature and percentage of additive > Interpolated fluid properties are displayed in a new screen and are used for all pipe and valve calculations > Automatic viscosity correction applied for nonturbulent flow calculation in measurable valves > TA-FUS1ON-C – new range of combined control and balancing valves with adjustable Kvs > TA-FUS1ON-P – new range of pressureindependent control valves > A-Exact – new range of thermostatic radiator valves with automatic flow limitation Available in 17 languages!
Download free application:
DN 15-25 Temperature range: 8-18�C
Find out more: www.imi-hydronic.com/TA-Compact-T
TA-Pilot-R Little giant In the smallest body the greatest abilities
> PILOT technology delivers up to 40% better accuracy > Weight is decreased by 80% in comparison to standard controllers with big springs and membranes > Over 50 % size reduction simplifies handling and installation > Installation is 2 times faster and cheaper > Unique measuring capabilities The new TA-PILOT-R is a modern differential pressure controller controlled by PILOT technology delivering unrivaled accuracy and stable pressure control. In-line body ensures very quiet operation even under very high differential pressures. The Compact and light body simplifies logistics, installation and saves money. Setting differential pressure is very convenient and simple with a 5mm hexagonal key. There are no heavy springs or large membranes. TA-PILOT-R is the result of 30 years of rich expereince in differential pressure controllers.
Watch the film to learn more
DN 65-200 Setting range: 10-50, 30-150, 80-400 kPa
8
March 2015
Changed for you! TA Hydronics is now IMI Hydronic Engineering
Visiting ISH 2015, you will have noticed the refreshed look of our company under the new brand of IMI Hydronic Engineering. This change reflects the refocused strategic direction of our group and a refreshed look. With the launch of IMI Hydronic engineering we aim to signal our greater focus on providing our customers with even better products, quality and service. But it doesn’t stop there. Providing a comfortable indoor climate which is also energy efficient is at the heart of what IMI Hydronic Engineering does. Talk to one of our team to find out more!
The most exciting ISH for IMI Hydronic engineering! 2015 marks the year of change – a leap into a simpler, easier and more efficient future. Not only with the new IMI Hydronic Engineering brand, but also with a number of innovations you can see at our stand at this year’s all important ISH exhibition. In particular I am very proud about a world first: the launch of the next generation automatic TRV from IMI Heimeier – Eclipse. Prepare to be amazed at its simplicity, form and function and come and experience one of our live events – either at the stand or at Frankfurt Zoo featuring none other than Max the Dragon – the star of our Eclipse campaign!
IMI Hydronic Engineering – Quick Facts: What’s new! Our logo: Our product brand logos:
Our new website: www.imi-hydronic.com
But it doesn’t just stop there. The new connective range of pressure maintenance systems from IMI Pneumatex will have you talking – communication within the HVAC system has never been easier. Add to that live demonstrations of the new cyclonic technology – 9 times more efficient in protecting your system than any other solution on the market. From IMI TA you can also expect smaller, more precise valves to help effectively control flows in your HVAC system helping you to save time and money. Meet with our team to find out more about our new product innovations and enjoy the hospitality on our stand. Peter Spencer Managing Director