Xbtufxbufs!Tbnqmfst!gps!uif!Xpsme
Portable and Stationary Wastewater Samplers
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Distributed by:
Dist
9435 WaterStone Blvd. Suite 140 Cincinnati, OH 45249 866 4 INC TECH sales@inctechnical.com
www.inctechnical.com
9435 Suite Cincin 866 4 sales@
Wastewater Samplers for the World
Portable Wastewater Samplers P2 Series The three Aquacell P2 variants centre around the well known and highly respected Aquacell sampling module. Whether it’s the super compactness of the P2-COMPACT, the Sample Temperature Control of the P2-COOLBOX or the Sample Collection Vessel versatility of the P2-MULITFORM that is needed, you can be confident that between these three models your Portable Wastewater Sampling requirement can be provided for.
Features •
All models MCERTs compliant (Environment Agency specification superseding E32 specification)
•
All models suitable for indoor and outdoor operation. With an ambient operation temperature range of -10°C to 50°C the P2 Series offer true ‘all condition’ flexibility
•
All key electronic equipment is housed in the rugged, humidity controlled body of the Aquacell Module
•
The lockable Front Cover combined with ‘loop through’ Security Cords provide the P2 Series with protection in vulnerable locations
•
Collected samples are stored in the selected Sample Collection Vessel(s). Being separate from the Aquacell Module and programming interface, this arrangement means the user can interrogate the program and carry out routine maintenance without the need to disturb the samples or sampling program
•
Access and retrieval of collected samples could not be easier with the slide out design of the P2-COMPACT and P2 -MULTIFORM samplers
•
Via the Ancillary Signal Connection all P2 models can be connected to and controlled by external equipment such as Flow Meters, pH Meters, PLCs etc.
•
All Aquacell P2 Series Samplers can be supplied with a choice of four Power Options. Integral 12VDC Battery, external 12VDC, single phase AC or single phase AC with trickle charged 12VDC backup battery - RENTAL -
All Aquamatic equipment is available for rental See Price List for details
P2 Series Models Model
Container Options
Sample Temperature Control
Typical Location
P2-COMPACT
5 litre only (integrated)
No
Indoor/Outdoor
P2-COOLBOX
5 litre only (integrated)
Yes
Indoor/Outdoor
P2-MULTIFORM
Various (see Sample Collection No Vessels and Technical Specification for details)
Indoor/Outdoor
P2 Series Installation Guide •
The Sampler should be installed as close to the sampling point as possible. This will help minimise cross contamination between successive samples and also reduce wear on working parts
•
A flat, horizontal mounting position should be provided (see Technical Specification for details of Sampler size)
•
Choose a sampling point where you can be sure that the wastewater is well mixed. Downstream of a measuring flume is ideal
•
The Sampler’s Intake Hose should be installed so that it is self-draining away from the Sampler Module
•
In order to avoid the possibility of siphoning it is essential that the maximum level of the source wastewater is lower than the Samplers intake level (see Data Table for details)
•
When siting the Sampler, consideration should be given to the possibility that direct solar radiation could cause the Sampler to rise above its specified maximum temperature (see Technical Specification for details). If this potential exists then additional solar screening should be provided
•
Where necessary a suitable isolated electrical supply should be provided (see Technical Specification for details)
•
Peripheral equipment such as Flow Meters, pH Meter etc. can be connected to the P2 Series via the optional Ancillary Signal Connection. This connection is supplied with a 1.5m long cable. If connecting over a long distance then one or more signal isolators (not supplied by Aquamatic) mounted local to the Sampler may be required in order to protect against damaging transients Aquamatic Limited • Mayfield Industrial Park • Liverpool Road • Irlam • Manchester • M44 6GD • UK
P2-COMPACT
P2-COOLBOX
P2-MULTIFORM
When super-compactness combined with uncompromised sampling performance is required, the Aquacell P2-COMPACT is the perfect solution. Ideal where Samplers are used and transported between different sites. Incorporated within the Aquacell P2COMPACT’s practical design is a single, easy clean, low profile 5 litre sample container. At only 0.05m3 the Aquacell P2-COMPACT is not only compact by name but also by nature.
Incorporated within the P2-COOLBOX is a high performance Sample Temperature Control facility. This ensures that the collected samples are preserved at an optimal temperature (0°C to 5°C up to 5 days) whilst awaiting collection / inspection. This is particularly useful when sampling biologically active wastewater. The Aquacell P2-COOLBOX is designed typically to operate at sites where the sampling requirement is infrequent or there is simply no power available. This high performance Portable Sampler makes a very practical alternative to installing a Stationary Sampler with Sample Temperature Control and the associated costs.
This is the most versatile member of the Aquacell P2 family. The Aquacell P2-MULTIFORM can accommodate a choice of 4 Sample Collection Vessels (see Sample Collection Vessel options). Changing Sample Collection Vessels is extremely quick and simple with the Aquacell Module’s lift off design. The open aluminum frame structure of the Aquacell P2-MULTIFORM provides close visual contact with the collected samples. Users will quikly appreciate the benefit of being able to see each sample depositing correctly into its container without having to dismantle the Sampler.
Thick wall insulation combined with sealed ‘no mess’ Cooling Elements provide the impressive Sample Temperature control performance offered by the P2-COOLBOX. As the Sample Temperature Control facility does not require any electrical power, the P2’s power source (normally an Integral Battery) is required only to power the Sampling Module and therefore maximises the operating period.
The P2-COOLBOX base easily separates into its component parts
The P2-COOBOX can be supplied with a Sample Temperature Monitoring Facility. With this option the minimum, maximum, average and present sample temperatures can by monitored on the Aquacell display. Additionally all the P2 Series Samplers can be fitted with an RS232 computer interface facility. This enables the download of logged sample temperature data from the Sampler Module to a PC (or similar) via an RS232 Serial Interface.
For more Sample Collection Vessels turn to page 6
Tel: +44 (0)161-777 6607 • Fax: +44(0)161-777 6617 • Email: sales@aquamatic.ltd.uk • www.aquamatic.ltd.uk
Stationary Wastewater Samplers S100
S300 Series The four S300 Series variants centre around the same high performance Aquacell S300 Cabinet. Between these four models and the S100 Sampler, virtually every Stationary Wastewater Sampling application can be provided for. As with every Sampler in the Aquacell Sampler range each S300 model incorporates the well proven and dependable Aquacell Module (see inside back cover for details).
S300 Series Models
The S100 is the simplest of the Aquacell Stationary Wastewater Sampler range. Being extremely compact the wall mountable S100 can be conveniently positioned adjacent to your effluent source. As with every Sampler in the Aquacell Sampler range the S100 model incorporates the well proven and dependable Aquacell Module (see inside back cover for details).
Model
Mounting Position
Sample Temperature Sample Frost Control Protection
Typical Location
S310
Floor
No
No
Indoor
S310H
Floor
No
Yes
Outdoor
S320
Floor
Yes
Yes
Indoor
S320H
Floor
Yes
Yes
Outdoor
Features •
All models MCERTs compliant
•
Three Cabinet construction options: - Standard – Galvanised Steel, pre-treated and finished with architectural grade white polyester powder coating - Optional – Stainless Steel 304 - Optional – Stainless Steel 304, finished with architectural grade white Polyester powder coating All finishes are extremely durable and suitable for indoor and outdoor applications
•
All key electronic equipment is housed in the upper rear compartment thus minimising exposure to corrosive gases and potential flood water
•
All S300 models can accommodate the complete range of Sample Collection Vessels (see Sample Collection Vessel options and Technical Specification pages for details)
•
Separate lockable compartments provide flexibility and security in exposed or vulnerable locations
•
Collected samples are stored in the Lower Compartment. Being separate from the Sampling Module this configuration means the user can interrogate the program and carry out routine maintenance without the need to disturb the samples
•
Access and retrieval of collected samples is extremely easy with the optional sliding Pull Out Tray (included with Integral bottlers)
•
Both S320 models incorporate Sample Temperature Control. This ensures that the collected samples are preserved at an optimum temperature (0°C - 5°C) whilst awaiting collection / inspection. This is particularly useful when sampling biologically active wastewater
•
Via the Ancillary Signal Connection all S300 models can be connected to and controlled by external equipment such as Flow Meters, pH Meters, PLCs etc.
•
The Auxiliary Equipment Facility provides for the integration of additional equipment such as Flow Meters, pH Meters etc. with the S300 cabinet. A power supply outlet and signal connections are mounted on a generic mounting plate which is fitted to the side of the S300 Cabinet
Features •
MCERTs compliant
•
The Aquacell S100 can be used with any one of the complete range of Sample Collection Vessels (see Sample Collection Vessel options and Technical Specification pages for details)
•
Mains or Battery powered (or both)
•
Lockable Front Cover
•
Quick release wall mounting system enabling easy removal and potential for use in multiple sampling point applications
S100 Wall Mounting Diagram
S100 Model
Mounting Position
Sample Temperature Control
Sample Frost Protection
Typical Location
S100
Wall
No
No
Indoor/Outdoor
Aquamatic Limited • Mayfield Industrial Park • Liverpool Road • Irlam • Manchester • M44 6GD • UK
- RENTAL -
All Aquamatic equipment is available for rental See Price List for details
Dual lockable doors mean the Sampler Module can be programmed, inspected and maintained without having to open the temperature controlled Lower Compartment.
The large volume Lower Compartment can accommodate a vast array of Sample Collection Vessels, both composite and multi bottle (see Technical Specification for more details). Access to these could not be easier with the optional Pull Out Tray.
Turn to page 6 for our comprehensive range of Support Services
All electrical connections both power and signals are wired into the rear of the S300 cabinet. A screw down protective panel provides security against unauthorised access. Terminals are positioned at a height of 1000mm from the floor.
S100/S300 Series Installation Guide •
The Sampler should be installed as close to the sampling point as possible. This will help minimise cross contamination between successive samples and also reduce wear on working parts
•
A flat, horizontal mounting position should be provided (S300 Series only) (see Technical Specification for details of Sampler dimensions)
•
Choose a sampling point where you can be sure that the wastewater is well mixed. Downstream of a measuring flume is ideal
•
The Sampler’s Intake Hose should be installed so that it is self-draining away from the Sampler Module
•
For convenience of operation and maintenance, a standing area should be provided in front of the Sampler
•
In order to avoid the possibility of siphoning it is essential that the maximum level of the source wastewater is lower than the Samplers intake level (see Data Table for details)
•
When siting the Sampler, consideration should be given to the possibility that direct solar radiation could cause the Sampler to rise above its specified maximum temperature (see Technical Specification for details). If this potential exists then additional solar screening should be provided
•
A suitable isolated electrical supply should be provided (see Technical Specification for details)
•
Peripheral equipment such as Flow Meters, pH Meters etc. can be connected via the optional Ancillary Signal Connection. This connection is supplied with a 1.5m long cable. If connecting over a long distance then one or more signal isolators (not supplied by Aquamatic) mounted local to the Sampler may be required in order to protect against damaging transients Tel: +44 (0)161-777 6607 • Fax: +44(0)161-777 6617 • Email: sales@aquamatic.ltd.uk • www.aquamatic.ltd.uk
Sample Collection Vessels Single Container Options (see Data Table for details of compatibility)
Often a single composite sample is all that is required. Aquamatic offer four Sample Collections Vessels to provide for this requirement.
5 litre Polyethylene Container
10 litre Polypropylene Container
5 litre Polypropylene Container
25 Polyethylene Container
(for use with P2-COMPACT only) Screw top, low profile container with additional screw top pouring spout. Removable ‘hand sized’ top disc makes for easy cleaning. Supplied with caps.
Open top container suited for use with most of the Aquacell Sampler range. Can be conveniently suspended beneath the S100 Sampler. Supplied with snap-fit lid and carry handle.
(for use with P2-COOLBOX only) Wide neck container makes for easy cleaning. Supplied with lid and carry handle.
Screw top container with additional screw top pouring spout. Removable ‘hand sized’ top disc makes for easy cleaning. Supplied with caps.
Bottler Options (see Data Table for details of compatibility)
When a more detailed profile of the collected wastewater is required it is often necessary to separate the samples and distribute then into a number of containers. Each container can then represent a specific period of time or number of samples. Aquamatic offer a wide range of Bottler options to provide for this requirement. Detachable Bottlers can be fully removed from the Sampler whereas Integral Bottlers (for use with S300 Series only) are integrated within the design of the Sampler and therefore, although containers/bottles can be removed the Bottler mechanism cannot.
12x0.7 litre Glass Bottler
Available as Detachable only. Screw top glass bottles are especially useful when testing for trace elements. Supplied with caps.
4x12 litre Polyethylene Integral Bottler
Available as Integral only. Screw top, wide neck bottles. Supplied with caps. Fitted with built-in distributor mechanism and Pull Out Tray for easy sample retrieval.
12x1 litre PET Bottler
Available as Detachable only. Screw top low cost recyclable bottles. Supplied with caps.
Available as Detachable only. Open top easy-clean wedge shaped containers.
Available as Detachable or Integral. An ideal solution when sample shots are taken continually but are not always required for analysis. This radical selfemptying concept enables the ongoing collection of daily composite samples WITHOUT the requirement for site visits in order to dispose of the previous days samples.
4x4.5 litre Glass Bottler
4x5 litre HDPE Bottler 24x1 litre HDPE Bottler
2x4.5 litre Self-Emptying Polypropylene Bottler
Available as Detached (as shown) or Integral. Screw top, wide neck bottles with handles. Supplied with caps. Integral model fitted with built-in distributor mechanism and Pull Out Tray for easy sample retrieval (Bottle Carrier shown not included with integral version).
Available as Detachable (as shown) or Integral. Screw top glass bottles are especially useful when testing for trace elements. Supplied with caps. Integral model fitted with built-in Distributor Mechanism and Pull Out Tray for easy sample retrieval (bottle carrier shown not included with Integral version). - RENTAL -
All Aquamatic equipment is available for rental See Price List for details
Support Services Aquamatic offers various Support Services to compliment its wastewater sampling equipment.
Consultation We can advise over the telephone or12x0.75 during a site as to the litrevisit glass best wastewater sampling equipment package and installation requirements, to achieve your specific effluent monitoring goals.
Commissioning Provided on site by an Aquamatic Service Engineer. Faults can occur due to incorrect installation and operation of equipment. A commissioning visit will provide you with the peace of mind that your installation is correct and that the equipment is set up and programmed suitable for your particular application.
Training Provided on site by an Aquamatic representative or at the Aquamatic factory.
1x10 litre polypropylene
Maintenance Contracts Provided on site by an Aquamatic Service Engineer. In order to help provide uninterrupted operation of your Aquamatic Wastewater Sampling Equipment, a Maintenance Contract provides regular visits (minimum 2 per year) to your site. During these visits various internal and external operational checks will be carried out and, where applicable, consumables such as desiccant bags, humidity indicators and pinch valve tube/volume control tubes will be replaced. In the event that your Wastewater Sampler requires additional attention (eg. a breakdown) during the 12 month Maintenance cover period, then you will be entitled to a 15% discount on all parts and labour used (not including travelling charges if a site visit is requested).
In house/On site Service In the event that your Wastewater Sampling equipment requires attention then you can simply return it to our factory or contact our Service Department and arrange for one of our Service Engineers to attend site.
Aquamatic Limited • Mayfield Industrial Park • Liverpool Road • Irlam • Manchester • M44 6GD • UK
The Aquacell Module Central to every Aquamatic Wastewater Sampler is the Aquacell Sampling Module. Whether your application requires Portable or Stationary wastewater sampling equipment, the same programming interface, sampling technique, functionality and performance are all guaranteed by the tried and tested Aquacell Sampling Module. Aquacell Sampling Modules are easily interchangable between Portable and Stationary Samplers.
Push fit Sample Chamber and Chamber Top allowing easy separation and cleaning Ever increasing sample tract diameter minimises blockage potential One clip removal of Pinch Valve Tube Backlit LCD (optional) Highly visible sample intake route allowing easy detection of effluent build up / blockage
Easy release of Sample Intake hose One clasp removal of large diameter Sample Chamber and Chamber Top allowing for quick and easy cleaning
Three stage Humidity Indicator with easy access plug to allow Desiccant Bag replacement Easy programming via tactile multi function keypad
General • • • • • • • • • • • • • •
All models are compliant with MCERTs standard for Continuous Water Monitoring Equipment Compliant with the requirements of the International Standard for Wastewater Samplers ISO 5667-10 Inherent high accuracy and repeatability of sample volume Ever increasing sample tract diameter minimises blockage potential Sample shot volume easily adjusted by altering Volume Control Tube length Virtually unlimited sample volume due to ‘multiple shots per sample’ facility Robust materials utilised throughout design Front access means that sample retrieval can be carried out without disturbing either the Sampler or its Intake Hose Easy to program, operate and maintain - Everything about the Aquacell is designed to minimize operator burden. Suitable for users with little or no previous experience of wastewater sampling With minimal moving parts and electrical / electronic components being securely housed in a humidity controlled enclosure, the Aquacell Module is designed to provide for many years of reliable operation Large diameter Sample Chamber (100mm) enabling easy cleaning Single phase AC or 12VDC (or both) powered 400+ samples achievable with a fully charged Aquamatic Battery Wide variety of Sample Collection Vessels from a single container to a multi bottle self-emptying format (see Sample Collection Vessel options for details)
Program Features • • • • • • • • • • • • •
Time, Flow and Event driven sampling modes Programmable for use with single or multiple Sample Collection Vessels Programmable Start and Stop Date / Time with option to Repeat Daily Low Power mode option – Where Battery preservation is critical Event logging - Provides historical records of samples acquired, bottler movements (if bottler fitted), fault condition occurrence etc. Sample temperature logging (optional with Aquacell P2-COOLBOX) Computer download facility (optional) – Provides facility to download logged data from the Sampler Module to a PC (or similar) via an RS232 serial interface Multipe shots per sample capability Remote control capability. Control Sampler from an external input e.g. PLC, pump start / stop signal etc. Pre and post intake phase purge times are programmable to suit installation Spot Sample button enables a sample to be taken for test purposes etc. Bottle Group mode - Bottler addresses each bottle of the selected group simultaneously therefore accumulating a group of identical samples Bottler can index at fixed time intervals or following a programmed number of samples
The Company Established in 1991, Aquamatic Limited is a leading manufacturer of automatic Wastewater Sampling Equipment, based in Manchester, United Kingdom. The company and its product range benefit from over 50 years experience in the wastewater sampling industry. From the outset the Aquamatic philosophy has been to focus strictly on the design and manufacture of uncomplicated, robust and reliable wastewater sampling equipment. By remaining committed to this goal, Aquamatic now offer a true leading edge range of products suitable for the worldwide market. Available both direct from Aquamatic in England and around the world via a network of local distributors, Aquamatic equipment is accessible globally to any company with a requirement for high quality, dependable wastewater sampling equipment. Aquamatic wastewater sampling equipment is used by a wide range of International companies and Organisations, including many well known names such as ABB, BNFL, Cadburys Schweppes, Heinz, Rolls Royce and Veolia. Additionally Aquamatic Wastewater Samplers are currently being used at many of the major Water Companies, both UK and Worldwide. Wastewater Samplers for the World
Tel: +44 (0)161-777 6607 • Fax: +44(0)161-777 6617 • Email: sales@aquamatic.ltd.uk • www.aquamatic.ltd.uk
Replaceable Desiccant Bag with 3 stage Humidity Indicator visible through Control Panel
Security
Various locking points. When secured with optional locking mechanisms the Sampler is rendered tamper-proof
Optional Connections Ancillary signal connection (1.5m cable) Instantaneous flow input Pulsed flow input
Accepts 4-20 mA into 255 ohm
Accepts normally open volt free contact closure - Event controlled by signal from an external device such as a pump or pH Meter etc.
Sample acquired output
Provides a contact closure each time a sample enters the Sampler Chamber. 1 normally open volt free 50VDC 1A rated contact pair will close for 2 seconds when the sample induction phase is terminated by wastewater bridging the 2 longer electrodes in the Sample Chamber
Sampler warning output
RS232 interface
Provides a contact closure when one or more warning conditions occur. 1 normally closed volt free 50VDC 1A contact pair will open for 2 seconds (or longer in the case of power outage) when one or more warning conditions occur
UK Environment Agency E32 specification Automatic Sampling Equipment (P2-COOLBOX only) Disclaimer: The information contained herein is accurate to the best of the publisher’s knowledge. Aquamatic reserve the right to alter any of the details contained herein without notice. Information herein must not be taken in any way to form a specification and Aquamatic accepts no liability whatsoever arising out of the use of the information contained. This information does not form any part of the ‘Conditions of Sale’ of our products.
S320H
•
•
•
•
110/220/230V AC 50Hz
•
•
•
•
•
•
•
•
Float charged backup battery 12V DC 7Ah
•
•
•
•
•
•
•
•
Separate 12V DC
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 x 5 litre HDPE Integral Bottler
•
•
•
•
4 x 12 litre Polyethylene Integral Bottler
•
•
•
•
•
•
•
S320
Integral battery 12V DC 7Ah
•
•
S310H
50
•
•
S310
S100
P2-MULTIFORM
P2-COOLBOX
30
25 litre Polyethylene Container
•
2 x 4.5 litre Self-Emptying Polypropylene Bottler
•
2 x 4.5 litre Self-Emptying Polypropylene Integral Bottler •
4 x 4.5 litre Glass Bottler 4 x 4.5 litre Glass Integral Bottler 4 x 5 litre HDPE Bottler
•
12 x 0.75 litre Glass Bottler
•
•
•
•
•
•
12 x 1 litre PET Bottler
•
•
•
•
•
•
24 x 1 litre HDPE Bottler
•
•
•
•
•
•
Height (mm)
428
805
650
730
1450
1450
1450
1450
Width (mm)
320
430
447
475
800
800
800
800
Depth (mm)
376
430
447
315
900
900
900
900
Weight (Kg) (excluding Sample Collection Vessel)
6.0
17.7
6.5
7.5
101
103
118
120
Current (A) @12V DC
5
5
5
-
-
-
-
-
Quiescent current (mA) in low power mode (RS232 interface not fitted)
3
3
3
-
-
-
-
-
0.02
0.02
0.02
-
-
-
-
-
60
60
60
60
98
598
433
598
Battery consumption per sample shot (Ah) Power (VA) @110V AC Surge current (A) @110V AC
Surge current (A) @220V AC Power (VA) @230V AC Surge current (A) @230V AC
Optional Connections
CE Marked and complies with: - EMC Directive 89/336/EEC - Low Voltage Directive 2006/95/EC
50
Power (VA) @220V AC
Standards Compliance
Water quality - Sampling - Part 10: Guidance on sampling of wastewaters ISO 5667 – 10
50
10 litre Polypropylene Container
Event and temperature log (if specified) can be downloaded to your PC or suitable hand held computer via RS232 serial connection. 16 events relating to the Samplers operation are logged including: Program Start / Stop times, Sample acquired times, Bottler increment times, Warning conditions (11 possible)
MCERTs – Continuous Water Monitoring Equipment Certification (see Data Table for details of model coverage)
50
5 litre Polypropylene Container P2-COOLBOX
Accepts normally open volt free contact closure
Remote control input
•
Humidity control
50
Ancillary Signal
-
-
-
-
-
-
9.5
9.5
60
60
60
60
94
549
398
549
-
-
-
-
-
-
6.8
6.8
60
60
60
60
98
598
433
598
-
-
-
-
-
-
7.5
7.5
Bottler RS232 Sampler Temperature Monitoring
•
Electrical / electronic components housed in humidity controlled enclosures (see Data Table for more details)
50
•
Environmental protection
50
•
See Data Table for details
•
Sample Collection Vessels
•
12mm increasing to 16mm (22mm when bottler is in use) between Intake Filter and sample discharge
Maximum ambient temp. (˚C)
•
Sample tract diameter
-10
•
10 metre long with Stainless Steel Intake Filter (cut to length to suit application)
10
•
Stationary models
2 metre long with Stainless Steel Intake Filter plus 2m long Intake Hose Extensions as required
•
Portable models
•
Intake Hose
-10
•
17 button Control Panel incorporating tactile keys LCD 16 x 2 alpha numeric backlit (optional)
5
5 litre Polyethylene Container P2-COMPACT
Electrical
User interface
-10
•
Mechanical
-10
•
See Data Table for details
•
Sample Collection Vessels
•
Standard - Braided PVC / Stainless Steel Optional - Braided PTFE / Stainless Steel
-10
•
Intake Hose with Filter
-10
•
Standard - Polypropylene / Stainless Steel / Silicone Rubber Optional – PTFE / Stainless Steel / Silicone Rubber
Minimum ambient temp. (˚C)
•
Sample Chamber Top
•
Acrylic or Glass (optional)
54*
•
Sample Chamber
54*
•
Cabinet Base: Stainless Steel 304 Cabinet Body options: Standard – Galvanised Steel, pre-treated and finished with architectural grade white polyester powder coating Optional – Stainless Steel 304 Optional – Stainless Steel 304, finished with architectural grade white polyester powder coating Lower Compartment insulation: Expanded Polyurethane Pentane blown foam
54*
•
S300 Cabinet
•
Sealed Polyurethane mouldings / Stainless Steel components
54*
•
Sampler module
65
•
Materials of construction
65
•
See Data Table for details
•
Ambient operating temperature
65
•
60˚C
65
•
Maximum sample media temperature
IP rating
•
30 seconds (approximately) with 4 metres lift
•
Sample shot cycle time
Sample Frost Protection Sample temperature control
•
Single shot 20 - 500 ml (larger total sample volume can be achieved through programmable multiple shots / sample). 100ml maximum shot size for Samplers used with 12 bottle Bottlers
•
0.5 metres / sec (average) with 7 metre lift
Sample shot volume range
•
Transport velocity
MCERTs certified Cabinet enclosure
•
> 7 metres
•
Maximum lift height
Model
•
Time – Sampling frequency from 1 min to 99 hrs 59 mins Flow – 4-20mA or pulsed volt free contact closure Event – Controlled by external equipment (such as a pump or pH Meter etc) providing volt free on / off contact
General
Air pump vacuum system
Sampling method
Enviromental
Wastewater from a non-pressurised sampling point
Sample extraction method
Power options
Media/Source suitability
Sample Collection Vessel compatibility
Not suitable for use in classified hazardous areas (see Data Table for more details)
Size and Weight
Environmental suitability
•
Performance
P2-COMPACT
DATA TABLE
Technical Specification
* Incorporates Aquacell Sampler Module rated at IP65