Inspection Equipment Co Ltd 37 Western Parkway Business Centre Lower Ballymount Road. Dublin 12
Specials08
Phone 353-1-4502666 Fax 353-1-4500401 Email sales@inspection.ie www.inspection.ie
Precision Tools & Instruments Prices effective through to December 31st, 2008
Phone: (353)-1-4502666
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
Calipers
2
Mitutoyo Digimatic Calipers
up SAVE 0 to 4 %
• The Absolute MyCal E-Z allows direct measurements from power on. You can forget the time consuming origin setup which otherwise is required each time the power is turned on.
• Large .295" high LCD digits (.365" high LCD digits for 12" Model) allow measurement results to be at a glance.
Buy an ABSolute DIGIMATIC Caliper Code No. 500-196-20 and receive a FREE L’Occitane Bath and Shower Gel and a FREE Mitutoyo 2009 Calendar all for just €62.00 ex. VAT
• .0005"/0.01mm resolution • Stainless Steel
Order No.
Measuring Range
500-196-21 0-6”/0-150mm 500-196-21 0-6”/0-150mm 500-197-20 0-8”/0-200mm 500-193 0-12"/0-300mm 500-171-21* 0-6”/0-150mm 500-172-21* 0-8”/0-200mm 500-173* 0-12"/0-300mm * With SPC Output
Type
No Output No Output No Output No Output With Output With Output With Output
Remarks
Free Shower Gel & Calendar
List Price
€101.25 €101.25 €192.30 €346.15 €162.50 €192.30 €369.23
Sale Price
€62.00 €59.95 €115.00 €225.00 €105.63 €125.00 €240.00
Mitutoyo Coolant Proof Calipers IP66
SAVE 30%
Its sealed housing is IP-66 rated, meaning it’s nearly immune to the coolants, dirt, grit and chips found in many manufacturing environments. 0.0005"/0.01mm resolution with ±.001" accuracy for a 6" model and an 8" model
Order No 500-672 500-673 500-674 500-682 500-683 500-684
Range 0-6”/0-150mm 0-8”/0-200mm 0-12”/0-300mm 0-6”/0-150mm 0-8”/0-200mm 0-12”/0-300mm
Output No No No Yes Yes Yes
List price €121.43 €178.57 €248.57 €171.42 €221.43 €374.29
Sale Price €85.00 €125.00 €174.00 €120.00 €155.00 €262.00 While present stocks last
Phone: (353)-1-4502666
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
Calipers
3
Mitutoyo Coolant Proof Calipers IP67
SAVE 25%
• Water, Oil, Dust, Coolant and Submersion resistance (on IP67 model) • Imperial/Metric conversion • Large LCD Display • Origin Setting • ABSolute feature • Lock Nut • Thumb Roller Accuracy ± 0.02mm/± 0.001”
Order No 500-752 500-753
Range 0-6”/0-150mm 0-8”/0-200mm
€93
Output No No
List price €124.00 €200.00
Sale Price €93.00 €150.00
MarCal Caliper 16 EW waterproof class IP67
MarCal. Digital Caliper 16 EX Free set of pliers with each caliper
Functions: ON/OFF, RESET (Zero setting), mm/inch, AUTO OFF/ON. High contrast LCD with 8,5 mm high digits Order No 4102204 4102402 4102360
Range 0-6”/0-150mm 0-8”/0-200mm 0-12”/0-300mm
Phone: (353)-1-4502666
List price €99.00 €166.67 €206.67
Free set of pliers with each caliper
UP SAVE % 0 3 O T
Sale Price €69.00 €125.00 €155.00
Fax: (353)-1 4500401
SAVE 25%
On/Off, 0 (Zero setting), mm/inch, reference Lock, Unlock Inductive waterproof measuring system FPS (Fluid Protected measuring System)
Order No 4102911
Range 0-6”/0-150mm
Email: sales@inspection.ie
List price Sale Price €145.33 €109.00
Web: www.inspection.ie
Calipers
4
Digimatic Calipers Mitutoyo Moore & Wright with SPC Output
SAVE 0% over 6
The Absolute MyCal E-Z allows direct measurements from power on.
. 0.0005"/0.01mm resolution
Stainless Steel, SPC Output
Manufactured by Mitutoyo. Labeled Moore & Wright Same as 500-171-21* Order No. EC1508/01
Measuring Range 6”/150mm
Resolution
List Price €162.50
.01mm/.0005”
Mitutoyo Vernier Calipers
Sale Price €65.00
MarCal Digital Depth Gauge 30 EW IP67
SAVE 50%
Mitutoyo vernier calipers 150 mm graduation .05mm
Order No.
530-101
Measuring Range 150mm
Graduation .05mm
List Price
€36.00
Excellent protection against Water, Oil, Dust. Protection Class IP67 Free set of pliers with each depth gauge
Sale Price
€18.00
Mitutoyo Dial Calipers High precision jewelled bearing mechanism. Thumb wheel and locknut.
Phone: (353)-1-4502666
Fax: (353)-1 4500401
SAVE 25%
Order No 4126600
Range List price Sale Price 0-6”/0-150mm €338.67 €254.00
SAVE 30%
Order No 500-671 500-681 500-717 500-675
Range 0-150mm 0-150mm 0-6” 0-6”
Grad .02mm .01mm .001” .001”
Rev 2mm 1mm 0.2” 0.1”
Email: sales@inspection.ie
List €107.14 €112.85 €98.57 €106.67
Sale €75.00 €79.00 €69.00 €80.00
Web: www.inspection.ie
Micrometers
5
Mitutoyo Quantum Micrometers 2mm feed per revolution
New SAVE 25%
Free Draper Tools Pliers set with each Quantum micrometer
Measurement applications: Ultra-Fast and Water resistant, this ground breaking Micrometer is suitable for use in areas when
there is a high risk of coolant splash. Large LCD display for error free external measurements
Resolution .00005” / .001mm Order No. 293-185 293-186 293-180 293-181
Range 0–1"/0–25mm 1-2"/25-50mm 0–1"/0–25mm 1-2"/25-50mm
List Price €166.66 €233.33 €253.33 €266.66
Remarks No SPC output No SPC output With SPC output With SPC output
Sale Price €125.00 €175.00 €190.00 €200.00
Mitutoyo Digimatic Micrometer MDC-Lite
Micromar 40 EW
SAVE 35%
SAVE 20%
Free Draper Tools Pliers set with each Mahr Digital Micrometers Micromar 40 EW, Protected against water, oil and dust according to protection class IP65. Reference-Lock-Function secures the zero position and prevents operation errors Resolution .001mm/.00005” Order No. 4151700
Range 0-25mm 0-1”
Phone: (353)-1-4502666
Res 00005” .001mm
List €160.00
Sale €128.00
Fax: (353)-1 4500401
Provided only with a zero-set key for easy origin setting. A friction thimble for a constant measuring force. Large characters on the LCD screen. No spindle clamp. No data output Supplied in fitted plastic case
Order No.
293-816
Range 0-1”
0-25.4mm
Resolution 0.00005”
0.001mm
Email: sales@inspection.ie
List Price
€106.15
Sale Price
€69.00
Web: www.inspection.ie
Micrometers
6
Mitutoyo Digimatic Micrometers
SAVE 35%
Extra large LCD readout.. Two measuring modes—absolute and incremental Functions available: Origin setting, Inch/mm selection, Zero-setting, Data Hold (with SPC Models), Error alarm Auto-sleep. Carbide-tipped measuring faces.
Order No. Range Without SPC Output
Remarks
List
Sale
Price
Price
293-340
0–1"/0–25mm
No SPC/Ratchet Stop
€160.00
€104.00
293-345
1–2"/25–50mm
No SPC/Ratchet Friction
€223.07
€145.00
3–4"/75–100mm
No SPC/Ratchet Friction
293-344 293-346 293-347
0–1"/0-25mm
No SPC/Ratchet Friction
2–3"/50–75mm
No SPC/Ratchet Friction
With SPC Output Ratchet 293-334
0–1"/0-25mm
293-332
2–3"/50–75mm
293-331 293-333
With SPC/Ratchet Friction
€171.00
€263.07
€193.00
€296.92
€154.00
€236.92
1–2"/25–50mm
With SPC/Ratchet Friction
€252.30
€164.00
3–4"/75–100mm
With SPC/Ratchet Friction
€311.43
€218.00
With SPC/Ratchet Friction
Mitutoyo Micrometers
SAVE 50%
Includes the following features: carbide faces, positive locking clamp, ratchet stop for exact repetitive readings, baked enamel finished frame, clearer graduations on satin chrome finish. Order No. 103-101 103-105
€104.00
€160.00
Range 0-25mm 0-1”
Grad .01mm .001”
Phone: (353)-1-4502666
List €36.00 €36.00
Sale Price €18.00 €18.00
Fax: (353)-1 4500401
€195.00
€300.00
Tesa Brown & Sharpe Digital Micrometer
SAVE 30%
With patented TESA capa µ system. Measuring span of 30 mm. Large easy-to-read digital display Order No. Range
06030010 0-1.2” 0-30mm
Resolution
0.00005” .001mm
Email: sales@inspection.ie
List Price
€200.00
Sale Price
€140.00
Web: www.inspection.ie
3 Point Micrometers
7
Bowers Mechanical 3 point Micrometers
XT Analogue Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. XT measuring heads and setting rings are supplied with UKAS certification. Part No. Range List Price Special Part No. Range Free XTA6i 1/4-5/16” €211.11 €190.00 XTA6M 6-8mm XTA8i 5/16-3/8” €197.78 €178.00 XTA8M 8-10mm XTA10i 3/8-1/2” €197.78 €178.00 XTA10M 10-12.5mm XTA12i 1/2-5/8” €197.78 €178.00 XTA12M 12.5-16mm XTA16i 5/8”-3/4” €202.22 €182.00 XTA16M 16-20mm Drill or Jigsaw XTA20i 3/4-1” €222.22 €200.00 XTA20M 20-25mm with any Bowers order over XTA25i 1-1-3/8” €316.67 €285.00 XTA25M 25-35mm €1000 XTA35i 1-3/8-2” €322.22 €290.00 XTA35M 35-50mm from this page XTA50i 2-2-5/8” €388.89 €350.00 XTA50M 50-65mm XTA65i 25/8”-31/4” €388.89 €350.00 XTA65M 65-80mm XTA80i 3-1/4-4” €488.89 €440.00 XTA80M 80-100mm
Bowers 3 point Digital Micrometers
IP65 Electronics. RS-232C output. Resolution 0.001mm/0.00005”. Tungsten carbide measuring faces on all 3-point heads from 12.5mm. Extensions available above 6mm for deep hole measurement Setting rings included with individual instruments and sets.UKAS certificates supplied as standard with all gauges. Part No. XTD6M XTD8M XTD10M XTD12M XTD16M XTD20M XTD25M XTD35M XTD50M XTD65M XTD80M
Range 6-8mm 8-10mm 10-12.5mm 12.5-16mm 16-20mm 20-25mm 25-35mm 35-50mm 50-65mm 65-80mm 80-100mm
Depth 58mm 58mm 58mm 62mm 62mm 66mm 66mm 80mm 80mm 80mm 100mm
Bowers 3 point Digital Micrometers
Acc .004mm .004mm .004mm .004mm .004mm .004mm .004mm .004mm .005mm .005mm .005mm
List Price €616.67 €616.67 €628.89 €636.67 €636.67 €766.67 €883.33 €916.67 €1016.67 €1016.67 €1072.22
Special €555.00 €555.00 €566.00 €573.00 €573.00 €690.00 €795.00 €825.00 €915.00 €915.00 €965.00
IP65 Electronics. RS-232C output. Resolution 0.001mm/0.00005”. Tungsten carbide measuring faces on all 3-point heads from 12.5mm. Extensions available above 6mm for deep hole measurement Setting rings included with individual instruments and sets.UKAS certificates supplied as standard with all gauges. Part No. XTH6M XTH8M XTH10M XTH12M XTH16M XTH20M XTH25M XTH35M XTH50M XTH65M XTH80M
Phone: (353)-1-4502666
Range 6-8mm 8-10mm 10-12.5mm 12.5-16mm 16-20mm 20-25mm 25-35mm 35-50mm 50-65mm 65-80mm 80-100mm
Fax: (353)-1 4500401
Depth 58mm 58mm 58mm 62mm 62mm 66mm 66mm 80mm 80mm 80mm 100mm
Acc .004mm .004mm .004mm .004mm .004mm .004mm .004mm .004mm .005mm .005mm .005mm
Email: sales@inspection.ie
List Price €730.00 €716.00 €756.00 €766.00 €814.00 €868.00 €942.00 €967.00 €992.00 €992.00 €1057.00
Special €655.00 €645.00 €680.00 €690.00 €733.00 €782.00 €850.00 €870.00 €893.00 €893.00 €955.00
Web: www.inspection.ie
Indicators
8
Mitutoyo IDC Type Digimatic Indicator
up SAVE to 5 0 %
• Preset, Zero-Set, inch/mm,
• Stem diameter of .375" or 8mm • SPC output provided • Average battery life 5,000 hours
+/- direction and GO/±NG functions. • Face rotates 330° for use at various angles.
Order No. 543-272B 543-271B 543-251B 543-252B 543-451B 543-462B
Range 0-.5"/0-12.7mm 0-.5"/0-12.7mm 0-.5"/0-12.7mm 0-.5"/0-12.7mm 0-1"/0-25mm 0-2"/0-50mm
Resolution .0005"/0.001mm .0005"/0.001mm .00005"/0.0001mm .00005"/0.0001mm
Accuracy .0008" .0008" .00012" .00012"
.00005"/0.001mm .00005"/0.001mm
.00012" .00024"
Mitutoyo IDS Digimatic Indicators
Stem 3/8” 8mm 8mm 3/8”
List Price €226.00 €226.00 €307.14 €307.14
8mm 8mm
€435.71 €688.75
Sale €113.00 €158.20 €215.00 €215.00 €305.00 €551.00
SAVE 30%
Absolute Encoder ensures all settings and readings are maintained for the life of the battery (even when the power is turned off) Origin (zero), inch/mm button, ±direction switch Immune to overspeed error SPC Output Average battery life 20,000 hours using SR-44battery (541980)provided standard quantizing error: ± 1 count
Order No.
Resolution.0005"/0.01mm
543-682 543-683
Range
Stem
List Price
0-.5"/0-12.7mm
3/8”
€114.29
0-.5"/0-12.7mm
8mm
Functions: ON/OFF, 0 (Set display to zero), mm/inch. Reversal of counting direction PRESET (for entering a numerical value). DATA (data transmission with a data connection cable). LOCK-Function: keys can be blocked, Inductive measuring system, life of battery approx. 2 years. Max measuring speed 1.5 m/sec (60“/sec), Stem 8mm 4336401 4336350
Type
1075 1081
Phone: (353)-1-4502666
Range
0.5"/0-12.5mm 0.5"/0-12.5mm
Resolution
.01mm/.0005” .001mm/.00005”
Fax: (353)-1 4500401
€80.00
€114.29
Digital Indicators
Order No.
Sale Price
List
€125 €250
€80.00
SAVE 20%
Sale Price €100.00 €200.00
Email: sales@inspection.ie
Web: www.inspection.ie
Indicators Mitutoyo IDU Digimatic Indicator with Absolute Encoder AVE
Mitutoyo Dial Indicator
S 35%
• Compact and economical design. • Provided with a data output port for connection with the SPC system. • Operating temperature: 0°C–40°C • Membrane sealed face helps keep out contaminants. • 0-1"/0-25.4mm measuring range • .0008" accuracy (20°C) Our Regular Price: €153.85 Order Number: 575-123 €
100.00
9
€
25.00
Order No. Metric 2046S 2109S-10 Imperial 2414S 2416S 2923S-10
Grad
List
10mm 1mm
0.01mm 0.001mm
€35.71 €77.14
.5" 1" .05”
FREE Magnetic base with every Mahr Indicator
Mechanism Shockproof Anti magnetic. Movement bearings are jeweled with 8 precious stones. Automatic matching to sensing direction, thus ensuring error-free reading
4305200 4307200 4308150 4308200 4306200 4306250
800S 800SG 800SM 800SGM 800SGL 800SGL
Range Grad 0.8mm 0.8mm 0.2mm 0.2mm 0.5mm 0.5mm
Phone: (353)-1-4502666
.01mm .01mm .002mm .002mm .01mm .01mm
Acc
.008mm .008mm .003mm .003mm .003mm .003mm
Stylus
14.5mm 14.5mm 14.5mm 14.5mm 41.24mm 41.24mm
Fax: (353)-1 4500401
Face
27.5mm 38mm 27.5mm 38mm 27.5mm 38mm
Price
Mitutoyo's New Dial Gauges with shock resistance increased with a more robust gear train, while contamination resistance has been dramatically increased over other indicators of this type with a tighter seal around the bezel and frame, and the elimination of a lifting lever screw.
Range
The new generation of Test Indicators with a water proof dial
Order No.Code
SAVE 30%
€65.00 €75.00 €85.00 €95.00 €105.00 €120.00
.001" .001" .0001”
€68.57 €68.57 €102.86
Sale Price €25.00 €54.00 €48.00 €48.50 €72.00
Mitutoyo Quick-Set Test Indicators
SAVE 30%
The most direct gear train design ever applied to Test Indicators means– higher levels of sensitivity, reliability, repeatability and accuracy throughout tool life. Stylus length 513-404E is 20.9m Stylus length 513-405E is 14.7mm Stylus length 513-402 is 20.9mmStylus length 513-403 is 14.7mm Order No. Range Grad
513-404E 513-405E 513-402 513-403
Email: sales@inspection.ie
0.8mm 0.2mm .03" .008"
.01mm .002mm .0005" .0001"
List
€82 €100 €82 €107
Sale
€57.00 €70.00 €58.00 €75.00
Web: www.inspection.ie
Height Gauges
10
Mitutoyo Digimatic Height Gauges SAVE 35%
€
Measurement applications SAVEcolumn providing highly repeatable height measRobust construction with thick 35% urement and stability E
Features • Fine adjustment • Clear LCD screen for error free reading • Tungsten Carbide tipped scriber • Imperial/Metric conversion • Zero/ABSolute Order No. 570-312
SAV 30%
• Presetting • Direction change • Data Hold • Data output Accuracy 0-300mm ± 0.04mm, 0-600mm ± 0.05mm, Measuring Range 12”/300mm
List Price €476.92
Sale Price €310.00
Mitutoyo Digimatic Height Gauges
Measurement applications Double column provides highly repeatable measurements and stability in this height gauge
Features • Easy to use design • Clear LCD screen for error free reading • Imperial/Metric conversion • Zero/ABSolute • Origin setting • Preset Order No. 192-630 192-632
310.00
SAVE 30%
± directional switching • Data hold • Overspeed alarm • Coarse/fine feed switching • Tungsten Carbide tipped scriber Accuracy 0-300mm ± 0.02mm, 0-600mm ± 0.05mm,
Range 0-12”/0-300mm 0-24”/0-600mm
Mitutoyo QM1-D-Height Gauge
List Price €785.71 €1107.14
Sale Price €550.00 €775.00
€
1980.00
Extreme accuracy, increased functionality and ease of use. The QM-Height delivers outstanding accuracy of ±(2.8+5L/1000)µm to satisfy your most critical measurement needs. It measures maximum/minimum and displacement from the surface or by increment. It also measures inside/outside diameter via a unique process (detect the circle apex and process by tracing measurement). Additionally, all the measurements can be saved and recalled after measurement. Resolution: .001mm/.00005” Order No. Range List Price 518-221 0-14"/0-350mm €2200.00 518-223 0-24"/0-600mm €2861.11
Phone: (353)-1-4502666
Fax: (353)-1 4500401
Sale Price €1980.00 €2575.00
Email: sales@inspection.ie
Web: www.inspection.ie
Height Gauges
11
TESA HITE Magna 400
€
1775.00
• Electronics totally protected against oil and water splashing or dust particles (IP65). • Control panel with numerical display to 0,001 / 0,005/0,01 mm 0,0001/0.0002/ 0.001 in. • Dynamic probing of the workpiece with a constant measuring force. • Easiness, high reliability when checking bores or shafts using TESA’s unique device for automatic detection of the culmination point • Acoustic signal to acknowledge value capture, also conveniently programmable. • Ability to measure parallelism errors. • RS 232 data output. Accuracy .008mm
Order No. Range 07.30043 415mm /16”
Application range 570 mm /22”
Sale Price €1775.00
Mitutoyo 2-D Linear Height LH-600C
€
Features • RS-232C SPC output as standard • Clear LCD screen for error free reading • Imperial/Metric conversion • Zero Setting • ABS/INC change over • Origin shift and Preset • Ball diameter compensation • Width measurement • Centre measurement • MAX/MIN measurement
Code 518-223
Phone: (353)-1-4502666
Description 972mm/38.6” Ht Gauge
Fax: (353)-1 4500401
4500.00
• Inside/Outside measurement • Angle measurement • Go/No Go judgement • Two dimensional measurement • Teaching Function and User's macro editor • Touch Signal Probe (optional) • 5mm Ball Probe with Holder1 Accuracy ±(1.3+0.6 L/600)µm L=Measured Length
List Price €4995.00
Email: sales@inspection.ie
Sale Price €4500.00
Web: www.inspection.ie
Precision Tools
12
Steel Vee Blocks - Pair Steel Vee Blocks are made from special tool steel hardened & precision ground to extreme accuracies. The Vee's are central, parallel and square with the ends & sides. Supplied in matched pairs with clamp. 90 degree vee Part No VBS-0 VBS-1 VBS-3
Size 40 x 32 x 32mm 50 x 40 x 40mm 80 x 63 x 63mm
Squareness 0,003mm 0,003mm 0,004mm
Flatness 0.002mm 0.002mm 0.003mm
Price €30.00 €45.00 €75.00
Compound Sine Tables Designed for accurate holding of work pieces at desired angles. Made from hardened and precision ground tool steel. M6 x 1 Tapped holes are provided on the top plate for clamping of the job. Rigid strap clamp for locking, that always remains below the top surface. Base plate is provided with relief for minute angle adjustment.
Model STC-1
Base size Roller distance Angular Adj 150 x 150mm 125mm 0-60°
Height 76mm
Price €450.00
Knife Straight Edge Made from Steel, face hardened, ground and lapped. When it is placed against a well illuminated background on the surface under examination, any white light visible shows the deviation in flatness.
Model KE-2 KE-3 KE-4 KE-5 KE-7
Phone: (353)-1-4502666
Length 75mm 100mm 150mm 200mm 300mm
Fax: (353)-1 4500401
Width 30mm 30mm 30mm 35mm 40mm
Thickness Flatness 5mm .002mm 5mm .003mm 6mm .003mm 8mm .005mm 10mm .008mm
Price €12.00 €15.00 €20.00 €25.00 €50.00
Email: sales@inspection.ie
Web: www.inspection.ie
Vices & Stands
13
Precision Machine Vice PM-3
PMH-1
PMH range Made from steel, hardened and ground. The moving jaw is guided through precise lead screw. PM range are specially designed to provide maximum holding power and highly repeatable positioning due to their forward and downward clamping action. Model PMH-1
Jaw Width 70mm
Jaw Depth 40mm
Opening 70mm
Length 200mm
Height 60mm
Price €250.00
Model PM-5 PM-3 PM-4
Jaw Width 60mm 70mm 100mm
Jaw Depth 30mm 40mm 45mm
Opening 60mm 100mm 100mm
Length 190mm 195mm 230mm
Height 70mm 77 mm 80mm
Price €160.00 €180.00 €295.00
Dial Gauge Stands
C - 3 & C - 8 Measuring Base : Hardened Tempered & Precision Ground Alloy Steel. Throat Depth 75mm. Pillar Diam 25mm. C-6 Measuring Base : High Strength, distortion free & corrosion resistant Granite.Throat Depth : 90mm Pillar Diameter : 31mm
Code C-3 C-8 C-6
Phone: (353)-1-4502666
Material Ground Tool steel Ground Tool steel Granite
Indicators not included
Fax: (353)-1 4500401
Size 60mm 60mm 220X160mm
Vertical Ht. 120mm 90mm 160mm
Fine adj. 3mm -------8mm
Price €80.00 €75.00 €125.00
Email: sales@inspection.ie
Web: www.inspection.ie
Stands
14
Dial Gauge Stands
C-12 Measuring Base : Stable Cast Iron & Precision Ground. Throat Depth : 90mm Pillar Diameter : 31mm C-19 Measuring Base : High Strength, Distortion Free & Corrosion. Resistant Granite Throat Depth : 100mm Pillar Diam 31mm C-22 High Strength, Distortion Free & Corrosion Resistant Granite. Throat Depth : 75mm Pillar Diameter : 25mm Code C-12 C-19 C-22
Material Ground cast iron Granite Granite
Magnetic Dial Gauge Stands
Size Vertical Ht. 220x160mm 160mm 300x300mm 300mm 150x150mm 120mm
Indicators not included
Fine adj. 8mm 8mm 3mm
Price €140.00 €155.00 €100.00
F-9 Suitable for locations where working area is very small. It accepts plunger and lever type dial gauges F-10
Indicators not included
Code F-9 F-10
Dial Gauge Stands
UDS-1
Indicators not included
Phone: (353)-1-4502666
F-10 Flexible arm allows the dial gauge to be positioned in any desired position with the help of centralized locking knob and has fine adjustment mechanism. Accepts dial gauges of stem dia 4mm, 8mm dovetail and lug fixing.
Material Magnetic Base Magnetic Base
Size 40mm 35 X15mm
Overall Ht. 100mm 180mm
Fine adj. -------3mm
Price €20.00 €30.00
UDS-1 Medium sized portable support, highly suited for mounting dial gauges, levertype dial test indicators, etc. Cast iron base with all sides ground parallel. Vertical column moves along T-slot and can be clamped at any point. Both column as well as measuring arm are made of steel and are chrome plated. Apart from two rigid articulation points, fine adjustment also provided. MPDS-1 has a ground cast iron base. The stand clamps both plunger and level type dial gauges with fine adjustment mechanism besides the marking scriber. Code MPDS-1 UDS-1
Fax: (353)-1 4500401
Material Size Vertical Ht. Fine adj. Ground cast iron 100x 78mm 225mm 3mm Ground cast iron 228x76x45mm 320mm 3mm
Email: sales@inspection.ie
Price €60.00 €85.00
Web: www.inspection.ie
Zero Setters Screw Jacks
Code SJ-1
Description Screw Jacks
Micrometer Stand
Used for leveling surface plates or other precision instruments. Supplied in a set of 3 with handle Min Ht 55mm
Max Ht. 80mm
15
Load Cap. Price 400Kgs €45.00
Code MS-1
Micrometer Stand is an indispensable clamping device where more precise and stable measurements are required, and is used to speed up inspection. It provides a desirable measuring position and angle for measurement.
Base Diameter 110mm
Height 105mm
Price €25.00
Zero Setter Standard 50mm +/- .01mm
Manufactured in Germany from special hardened steel. Function: Depress the spring-loaded probe face to the same height as the reference face of the body (e.g. using a straight-edge) and set the dial indicator to -0.50mm. Place the zero setter on the workpiece and feed the tool down on to spring-loaded probe face until the dial indicator reads 0. The tool is now positioned exactly 50 mm ( ± 0.01 mm ) above the workpiece to be machined (dimension for input into machine controls). Advantage: No damage to cutting edge of tool during setting. No feeler gauge or edge finder necessary. Application: For setting tools (e.g. end mills) to “zero” and for determining the reference point of the machine spindle. Supplied with: Wooden case and instruction manual.
Model 2101000 2102000
Description Zero setter 50mm +/- .01mm Zero setter 50mm +/- .01mm 2102000 is with magnetic base
Zero Setter Precision Line Accuracy .005mm
Price €160.00 €260.00
Manufactured in Germany from Special hardened steel. Function: Depress the spring-loaded probe face to the same height as the reference face of the body (e.g. using a straight-edge) and set the dial indicator to -0.50mm. Place the zero setter on the workpiece and feed the tool down on to spring-loaded probe face until the dial indicator reads 0. The tool is now positioned exactly 50 mm ( ± 0.005 mm ) above the workpiece to be machined (dimension for input into machine controls). Advantage: No damage to cutting edge of tool during setting. No feeler gauge or edge finder necessary. Application: For setting tools (e.g. end mills) to “zero” and for determining the reference point of the machine spindle. Supplied with: Wooden case and instruction manual. Model 2301000
Phone: (353)-1-4502666
Description Zero setter 50mm +/- .005mm
Fax: (353)-1 4500401
Price €250.00
Email: sales@inspection.ie
Web: www.inspection.ie
Edge Finders
16
Optical & Acoustic Edge finder 2-D & 3-D
Usage: For an accurate zero point determination. And an exact allocation of centre point from borehole to the drill spindle. 2D - Version: When workpiece and tracer touch, the circuit is closed and a LED signal appears. Thus with a distance of 5mm (= tracer radius) the workpiece‘s edge is reached. 3D - Version: The 3D Version has also a safety spring range in the z-axis. The reference length has to be measured with a pre-set device and taken into account respectively. Acoustic Version (2D or 3D): Like the optical edge finder with an acoustic Signal. Important: Protection against humidity is essential for all edge finders due to the built-in electronical components.
Article no. 1021600 1022000 1031600 1032000 1122000 1132000
Shank Length mm Ø16 99 Ø20 94 Ø16 111 Ø20 106 Ø20 119 Ø20 131
Edge Finders Straight Shank
Type 2D - optical 2D - optical 3D - optical 3D - optical 2D - acoustic 3D - acoustic
Price €55.00 €55.00 €110.00 €110.00 €90.00 €140.00
Manufactured in Germany The contact point has a flexible connection to the body via a spring, with an alignment accuracy of 0.01 mm. All parts fully hardened and ground. Size 10: With parallel contact point 10 mm Ø. Size 10/4: With stepped contact point 10 and 4 mm Ø. Application: For alignment of component reference surfaces or edges. Spindle speed approx. 600 rpm. Model 1001000 1001004
Description 10mm diameter mechanical edge finder 10mm/4mm diameter mechanical edge finder
Price €16.00 €20.00
3D-Touch Probe Can be used on milling and CNC machines to determine the zero position on a work piece determine the center of a bore determine and correct the position of a work piece measurement lengths and depths. Shank 16mm 4304300 Digital: Resolution .005mm. Repeatability .005mm 4304300 Mechanical: Resolution .01mm. Repeatability .01mm Order No. 4304300 4304301
Type Digital Analogue
Phone: (353)-1-4502666
Range XYZ 6mm 6mm
List Price Sale Price €427.03 €350.00 €302.70 €250.00
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
Mantis, Pins, Force Gauge Mantis Compact
SAVE 20%
Mantis Compact is a low magnification visual inspection microscope, providing truly superb 3D imaging with unparalleled freedom of head movement.Cold, true colour, LED illumination providing over 10,000 hours of shadow-free viewing. Superior ergonomics for improved productivity and increased throughput.
Part No Description M4916 Mantis Compact with Universal stand and 6X lens
List Price €1593.75
Special Price €1275.00
Meyer Pin Gauge Sets Class Z Tolerance .0001”/.0025mm
17
Mitutoyo Litematic, Resolution .0000005”/.00001mm. Force .01N • Ultra low 0.01N measuring force • Highly repeatable probe head drive system • High switchable resolution • Inch/Metric display • Digimatic and RS-232C output • Tolerance function • Accuracy (0.5 + L/100)µm Order No. 318-211
Range
0-2"/0-50mm
List Price Sale Price €5294.12
€4500.00
Chatillon TCD100 & TCD225 Series Digital Force Tester
NEW
All gauges and sets are traceable to N.I.S.T. Boxes and gauges both marked. Size and serial number laser etched on each piece (M-O not etched)Material: 52100 Bearing Steel. No sharp edges. All members 2” long. Size deviation .0001” All Inch sets in .001” & Metric sets in .02mm increments
Code
M0 M05 M1 M15 M2 M25
Code
M0MM M01MM M1MM M11MM M2MM M21MM
Range
No of Pins
.011 to .060” .0115 to .0605” .061 to .250” .0615 to .2505” .251 to .500” .2515 to .5005” Range
.22 to 1.50mm .23 to 1.51mm 1.52 to 7.70mm 1.53 to 7.71mm 7.72 to 12.70mm 7.73 to 12.71mm
Phone: (353)-1-4502666
Price
50 50 190 190 250 250
€65.00 €65.00 €150.00 €150.00 €225.00 €225.00
No of Pins
Price
65 65 310 310 250 250
€80.00 €80.00 €310.00 €310.00 €335.00 €335.00
Fax: (353)-1 4500401
The CHATILLON® TCD digital force tester is a revolutionary new testing system optimized for production testing applications. There is no personal computer required; no proprietary software required; no knowledge of programming languages required. The TCD provides you with an easy-to-use, intuitive, and straight-forward method for tensile testing, compression testing, shear testing, flexural testing or advanced multi-stage testing that conform to ISO, DIN, TAPPI and ASTM testing procedures. Its easy and its fast. Code TCD-100 TCD-225
Capacity Loadcell 100 lbf (.45 kN) Not included 225 lbf (1 kN) Not included
Email: sales@inspection.ie
Price €5200.00 €5650.00
Web: www.inspection.ie
Surface Finish
18
Surface Finish Gauge
SAVE 15%
€
1595
Error-free operation thanks to an integrated roughness standard. Automatic cutoff selection (patented) so that even non-specialists are ensured correct measuring results. 24 parameters offer the same range of functions as a laboratory instrument. Measuring range: 350 µm/180 µm/90 µm (changes automatically) Pick-up: Inductive skidded pick-up, 2 µm (80 µin) stylus tip, measuring force approx. 0.7 mN Traversing length Lt* 1.75 mm, 5.6 mm, 17.5 mm; automatic (0.069 in, 0.22 in, 0.69 in) Traversing length (acc. to MOTIF): 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.040 in, 0.080 in, 0.160 in, 0.320 in, 0.480 in, 0.640” Cutoff lc*: 0.25 mm, 0.8 mm, 2.5 mm; automatic (0.010 in, 0.030 in, 0.100 in) Number of cutoffs selectable 1 to 5 Parameters 24 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to tp (JIS, ASME), RSm, R, Ar, Rx Code Pocket Surf® PS1
List price €1876.47
Mitutoyo Surftest SJ-201P & SJ-301P
Sale Price €1595.00
SAVE 15%
SJ201P Large characters are displayed on the large easy-to-view LCD.Portable for easy measurement anywhere necessary. The detector/drive unit can be detached form the display unit for effortless measurement of awkwardly oriented workpieces. Wide 350µm (-200µm to +150µm) measurement range.Roughness parameters compatible with ISO, DIN, ANSI, and JIS. 19 analysis parameters are provided, including the basic Ra, Rq, Rz, and Ry parameters. Data ouput is available for SPC operation. RS-232C interface enables data transfer to computer or other devices using an external device. SJ301P Large LCD touchscreen with graphic display of measured profiles. Easy to operate touch panel. Wide 350µm measurement range. Go/No Go judgement on a desired parameter. Auto calibration for simple gain adjustment Built in printer. Built in SPC function. RS232C and Digimatic output. Optional memory card available. Drive unit can be operated remotely from display. Drive Unit Speed Measuring: 0.25mm/s (0.01"/s), 0.5mm/s (0.02"/s), Returning: 1mm/s (0.04"/s) Standard Detector Measuring Range 350µm/13780µin [-200µm to +150µm (-7880µin to +5900µin)] Stylus Material Diamond . Stylus Tip Radius 5µm (200µin) Radius of Skid Curvature 40mm (1.57") Assessed Profile Primary Profile (P), Roughness Profile (R), DIN4776, MOTIF R, MOTIF W Roughness Parameters Ra, Ry, Rz, Rt, Rp, Rq, Rv, Sm, S, Pc, R3z, mr, Rpk, Rvk, Rk, Mr1, Mr2, Lo, Ppi, R, AR, Rx, A1, A2 Analysis Graph BAC1, BAC2, ADC Cut Off Length c 0.25mm, 0.8mm, 2.5mm, 8mm (0.01", 0.03", 0.1", 0.3") Cut Off Length s 2.5mm, 8mm, 25mm, (0.1", 0.32",1") Resolution/Range 350µm/0.4µm, (13780µin/16.4&'181in) 100µm/0.1µm, (4000µin/4.1µin) 50µm/0.05µm, (2000µin/2.0µin) 10µm/0.01µm, (400µin/0.5µin) Code 178-923-2E
178-954-3E
Phone: (353)-1-4502666
Description SJ-201P SJ-301P
Fax: (353)-1 4500401
List price €1500.00
€2705.88
Sale Price €1275.00 €2300.00
Email: sales@inspection.ie
Web: www.inspection.ie
Rockwell Hardness Tester
Hardness Testers
19
€ Determining the Rockwell hardness of ferrous and non-ferrous metals such as hard alloy, carbon steel,alloy steel, cast iron Applied in the factories, scientific research institutes and laboratories of colleges etc. Novel design, easy to use, stable display value, convenient maintenance Standards: BSEN10109-96, ISO6508.2 Rockwell scales HRC: 0-100, HRB: 30-130. Testing range 20~80HRA, 20 ~ 100HRB, 20 ~ 80HRC
1795.00
Standard delivery Main unit . Test block A. Test block B. Test block C. 1.5875mm ball indenter. 120 ° cone diamond indenter. 60mm flat anvil. 60mm V-shape anvil TH 500
Price €1795.00
Rockwell Hardness Tester
Rockwell Digital Hardness Tester
€
3500.00
Operating Rockwell hardness testing of hard alloy, carbon steel, alloy steel and non metal. High digital display resolution Easy operation with auto loading and unloading of test force, and auto holding of test force. Standards: BS EN ISO 6508, ISO 6598.2 and ASTME18.
Standard delivery Main unit . Test block A. Test block B. Test block C. 1.5875mm ball indenter. 120 ° cone diamond indenter. 60mm flat anvil. 60mm V-shape anvil TH 550
Price €3500.00
Rockwell Hardness Tester
Rockwell & Rockwell Superficial Hardness Testers
Horizontal protrudent nose design, testing on surfaces difficult to reach Testing internal surface of ring parts whose diameter is not less than 23mm (0.900") Testing external surface of round bars whose diameter is not less than 3mm (0.120") Automatic test process High definition backlight LCD Simple and easy selectable operation menu RS-232/USB data output. Rockwell Scales ABCDEFGHJKLMPRSV Rockwell Superficial Scales 15, 30 & 45 N & T Scales Plus WXY scales TH 320
Rockwell Hardness Tester
€
5995.00
Price €5995.00
Free Mitutoyo Tool Kit Value €265.00 with every item purchased on this page
Consisting of an IP67 ABSolute Coolant Proof Caliper (500-752) .IP65 0-25mm Micrometer (inch/mm) • Ceramic Gauge Blocks (0.2 inches and 0.3 inches) . Presented in a Mahogany Presentation Box
Phone: (353)-1-4502666
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
Vision Products
20
Tesa Visio
Code Tesa Visio
Measurement range is 300 mm x 200 mm in (X-Y) x 150 mm range in the Z-axis. Manual Machine Versions have a coordinate stage fitted with a quick release system in both the X and Y axes. Disengageable wheel drives are used for quick motion in the Z-axis as well as fine setting for focusing the system TESA-VISTA software provides easy-to-use software designed for basic shop floor applications. List price €22,000.00
Sale Price €19,800.00
Price includes installation Calibration & Training
Mitutoyo Toolmaker’s Microscope
Order No. 176-808E 176-809E
The eyepiece section SAVE of the optical tube 10% incorporates a vernier protractor. Angle measurement is performed easily by turning the protractor to align the cross-hair reticle with the workpiece image. Both the transmitted and reflected illumination intensity can be adjusted to obtain the optimal illumination intensity for the workpiece. • Two XY stages with travel ranges, 2" x 2" (50mm x 50mm) 4” x 2” (100mm x 50mm)
Description List Price 2”x 2” Stage travel €3611.00 4”x 2” Stage travel €4675.00
Sale Price €3250.00 €4200.00
Merlin Microscope SAVE 0% over 2
From simple manual, single-feature operation to multi-point Video Edge Detection measurements, Merlin combines amazing simplicity with high accuracy and repeatability for a wide range of measuring applications. Part No Description List Price MN/S/300/2 Merlin Microscope €12437.50 6” x 4” Stage QC 300 Readout Resolution .001mm/.00005”
Special €9950.00
Kestrel Measuring Microscope
SAVE 20% over
Kestrel 200 combines high resolution, high contrast optical images with an intuitive microprocessor to deliver accuracy and simplicity for a wide range of measuring applications. The superior optical image of Kestrel even allows difficult-to-view features to be measured on low contrast components, such as black or transparent plastics Part No K/S/1
Description List Price Special Kestrel Microscope €9375.00 €7500.00 6” x 4” Stage QC 200 Readout Resolution .001mm/.00005”
Free Mitutoyo Tool Kit Value €265.00 with every item purchased on this page
Consisting of an IP67 ABSolute Coolant Proof Caliper (500-752) .IP65 0-25mm Micrometer (inch/mm) • Ceramic Gauge Blocks (0.2 inches and 0.3 inches) . Presented in a Mahogany Presentation Box
Phone: (353)-1-4502666
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
Vision Products
21
Scherr Tumico 8600 Series Video Inspection System
The “8600” Series Video Inspection System from S-T Industries is the perfect alternative to the Optical Comparator. High Magnification, precision zoom optics provide a superior image with a 4” x 8” or 4” x 12” travel stage, available with 3 readout systems, cross hair generator or video edge detection, and manual or CNC 2-axis or 3-axis systems for greater flexibility. Resolution .00005”/.001mm. Surface & contour illumination Zoom lens 30-180X Colour Camera & Monitor QC300 has Video edge Detection
Code 20-8600-02 20-8601-02 20-8600-03 20-8601-03
Type Travel 3 8600 with QC220 8” x 4” Stage travel 8600 with QC220 12” x 4” Stage travel 8600 with QC300 8” x 4” Stage travel 8600 with QC300 12” x 4” Stage travel
Scherr Tumico 9600 Series Video Inspection System
Price €11995.00 €13995.00 €13995.00 €15500.00
The "9600" Series Video Inspection System sets a new standard for structural rigidity with high resolution zoom optics, large 6" x 8" and 6" x 12" travel stages, dual digital crosshair generator, choice of three readout systems, option video edge detection and 3 axis CNC systems. S-T Industries has been manufacturing precision measuring tools and measuring instruments in the U.S. since 1942 Resolution .00005”/.001mm. Surface & contour illumination Zoom lens 30-180X Colour Camera & Monitor QC300 has Video edge Detection Code 20-9600-01 20-9601-01 20-9600-03 20-9601-03
Description Video System w/QC 100 DRO Video System w/QC 100 DRO Video System w/QC 300 DRO Video System w/QC 300 DRO
Stage 6” x 8” 6” x 12” 6” x 8” 6” x 12”
Price €12995.00 €14995.00 €14995.00 €16995.00
Scherr Tumico 9600 Series CNC Video Inspection System
CNC Inspection station with up to 6x12” travel stage same spec as 9600 above but with Quadra Chek 5000. PC Computer based digital readout and 3 axis motor drive with remote joystick and track ball for fine control. QC5000 includes Geometric measuring functions and video edge detection tools Colour VED for fast automatic and accurate measurement. Also includes auto focus, auto lighting control and colour camera Code Description Stage Price 20-9800-01 Video System w/QC 5000 DRO 6” x 8” €29995.00 20-9801-01 Video System w/QC 5000 DRO 6” x 12” €31500.00
Free Mitutoyo Tool Kit Value €265.00 with every item purchased on this page
Phone: (353)-1-4502666
Consisting of an IP67 ABSolute Coolant Proof Caliper (500-752) .IP65 0-25mm Micrometer (inch/mm) • Ceramic Gauge Blocks (0.2 inches and 0.3 inches) . Presented in a Mahogany Presentation Box
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
Optical Comparators
22
Mitutoyo 14”/350mm Optical Comparators
VE
SA • Heavy-Duty, bench-top model with horizontal optical system. 10% • Erect image on day-bright screen. • 14" (356mm) dia. protractor screen with crosshair line for easy alignment. • Floating-type workstage incorporates linear scales for fast, accurate measurement. • Suitable for thread pitch measurements — free from blurred or distorted images when the workpiece is angled. Price includes 10X lens & Fibre optic surface illumination Stage travel 10” x 6”
Order No. 172-848 264-141
Description PH-3515F Main Unit QM-Data 200
List Price €8883.33 €1627.78
Microtecnica 16”/400mm Optical Comparator
Sale Price €7995.00 €1465.00
The Orion is ideal for checking cylindrical parts either placed between centres or on “Vee Supports”, or using a Vice Support to clamp components. The new standard digital display/data processor is for the measurements of worktable displacements and angular projection screen. Data processor allows geometric measurements of the components under testing. Swing away lamp housing. Stage travel 200mm x 100mm, 10X lens MT100C Computerised Digital Display, Fibre Optic Surface illumination. Resolution .001mm/.00005” Code Description 780-LM13 Orion 16” Optical Comparator
List price Sale Price €9375.00 €7500.00
Scherr Tumico 14” Optical Comparator
The 3700 Series model is our top of the line 14" horizontal beam optical comparator. The 3700 is
the ultimate system for load capacity and accuracy. It features an erect image and S-T's exclusive gothic arch bearing ways which provide the best accuracy and life.
Measuring Travel: 12" (300mm) (X), 6" (150mm) (Y), Quick Release with fine adjust on X axis Top Plate: 5" x 20" (125mm x 500mm), nickel plated . Weight Capacity: 100 lbs. (45kg) Screen Protractor: Digital (1 minute/.01 degree) or Vernier 5’ Erect Image. Illumination: Profile and Duplex fibre Optic Surface . Screen: 14" (355mm) Sealed Image with 30, 60 and 90 deg lines . Helix: +/- 6 degrees via lamphouse displacement Lenses: 5X, 10X, 20X, 25X, 31 1/4X, 50X, 61 1/2X, 100X, 250X Swing Away Lamphouse. 2-Position Lens Turret Code 20-3700-02 14"
Description Optical Comparator w/QC 221 DRO
Free Mitutoyo Tool Kit Value €265.00 with every item purchased on this page
Price €11950.00
Consisting of an IP67 ABSolute Coolant Proof Caliper (500-752) .IP65 0-25mm Micrometer (inch/mm) • Ceramic Gauge Blocks (0.2 inches and 0.3 inches) . Presented in a Mahogany Presentation Box
Phone: (353)-1-4502666
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
Optical Comparators & Lasers Mitutoyo 12”/300mm Optical Comparator
Scherr Tumico 30” Optical Comparator
SAVE 30%
The 5600/5800 Series 30" Comparator features an ultrabright vertical screen, which projects an ERECT image of the part being inspected. With 60 years of experience manufacturing optical comparators in the U.S. and nationwide factory service makes S-T Comparators your best buy in the industry.
300mm/12" optical comparator, 2 axis readout .001mm/.00005", Stage 4" x 2", Surface & Contour Illumination. Digital protractor screen
€
5950
Code Description List Sale Price 302-916CEE PJ3000 Optical Comparator €8500 €5950.00
Mitutoyo Laser Micrometers
23
SAVE 10%
HEAVY DUTY STAGE 8" x 35" chrome plated top plate with 3 standard dovetail slots for mounting fixtures. Stage has 9" x 12" travel with 3" focus and 500 lb. load capacity. High precision, gothic arch bearings provide the ultimate in stage strength and accuracy Stage Motion: 2 axis variable speed joystick Measuring Stage Resolution: .00005"/.001mm Digital Screen Protractor: 1 min/.01 Deg arc Duplex Surface Illumination 30" Frosted Glass Screen w/ 30, 60, 90 Deg Lines Helix Angle: +/- 10 degrees by swinging lamphouse Mounted on Three 7" Wheels for Portability 10X lens set Code Description Price 22-5600-02 5600 with QC 221 DRO €37,500.00
Mitutoyo’s LSM-500S Series Laser Micrometers have the highest scanning speed in the world. A speed of 3,200 scans/sec makes in line measurements more accurate and repeatable. It’s memory function allow 100 programs and includes a built in program to measure odd fluted drills and endmills. Order No Model
Measuring Measuring Repeatability Range Inch Range mm 544-532* LSM-500S .0002” - .08” 0.005~2mm ±0.03µm 544-534* LSM-501S .002” - .4” 0.05~10mm ±0.04µm 544-536* LSM-503S .012” - 1.18” 0.3~30mm ±0.11µm 544-538* LSM-506S .04” - 2.36” 1~60mm ±0.36µm 544-540* LSM-512S .04” - 4.72” 1~120mm ±0.85µm *LSM-6000 display unit is required. Order No. 544-072 544-072 LSM-6000 Display Unit
Linearity
±0.3µm ±0.5µm ±1.0µm ±3µm ±6µm
Scanning Rate/sec 3,200 scans 3,200 scans 3,200 scans 3,200 scans 3,200 scans
List Price €6013.33 €4994.44 €5388.89 €7222.22 €10200.00 €2327.78
Free Mitutoyo Tool Kit Value €265.00 with every item purchased on this page
Sale Price €5400.00 €4495.00 €4850.00 €6500.00 €9180.00 €2095.00
Consisting of an IP67 ABSolute Coolant Proof Caliper (500-752) .IP65 0-25mm Micrometer (inch/mm) • Ceramic Gauge Blocks (0.2 inches and 0.3 inches) . Presented in a Mahogany Presentation Box
Phone: (353)-1-4502666
Fax: (353)-1 4500401
Email: sales@inspection.ie
Web: www.inspection.ie
24
Calibration Instruments
Pratt & Whitney Supermike. Accuracy 0.000020”/ 0.0005 mm
Heavy-duty cylindrical bed – Chromium-plated cylinder ensures long life and performance integrity and the rack and pinion drive eliminates movement during the measuring cycle. Carbide-tipped measuring spindles – Non-rotating measuring spindles have long life, corrosion-free lapped anvils and are calibrated to ultra finish and precision. Elevating table – Adjustability allows for presentation of the part to the instrument in a non-influencing manner. Direct-reading, microprocessor-based digital display – Easy-to-read digital display provides direct reading in inch or metric units Code Range U302566 0-10”/0-250mm
Accuracy 20 µinch 0.5 µm
Price €16,500.00
Pratt & Whitney Universal Supermicrometer® Accuracy .000010”/ .00025mm
The definitive bench micrometer, the Universal Supermicrometer®(USM), offers the advantage of being two instruments in one, by providing the ability to measure both internal and external parts, gauges or standards. Linear Encoder with Zero Abbe Offset – A high precision glass scale located along the measurement axis eliminates Abbe offset errors that reduce overall measurement uncertainty Variable Force – Ranging from -8 to +40 ozf Touch Screen Operator Interface – LCD touch screen computer can be positioned to accommodate each operator's needs GaugeCal® control software – Microsoft Windows® based software reduces data entry, eliminates transcription errors, and speeds up measurements of your digital Super Micrometer. GaugeCal automatically enters tolerances for rings, plugs, pins, threads (calculates pitch/major diameter) and flags out-of-tolerance conditions. Code Range U307000 0-11”/0-275mm
Accuracy 10 µinch 0.25 µm
Price €29,950.00
Pratt & Whitney LabMaster Universal® Accuracy .000002” / .00005 mm
With instrument uncertainty to 2 millionths of an inch (50 nanometers), the Labmaster Universal (LM U306270) is suitable for virtually all Internal (ID) and external (OD) measuring applications. This laser-based universal length measuring system (ULM) has been developed by Pratt & Whitney for gauge calibration laboratories that need to precisely measure length, outside diameter, inside diameter, pitch diameter, lead, major/minor diameter, taper, linear displacement, and thickness.
High accuracy is maintained by its laser interferometer, zero Abbe offset design, and large measuring table with center position, height, pitch, and yaw controls. The computer-controlled precision air bearing slide and gauging fingers remove operator-influenced errors commonly observed with traditional gauging methods by maintaining constant force. It also greatly minimizes wear and tear to both the measuring standards and the instrument. The ULM is capable of measuring gauge blocks, end standards, plain rings, threaded rings & plugs, API gauges, pin & plug gauges, tapered plugs, cylindrical setting gauges, micrometers, indicators, LVDTs, calipers, and snap gauges with instrument uncertainty to 2 millionths of an inch (0.05 micron). It is suitable for virtually all ID and OD applications through its wide 0.020-inch (0.5 mm) to 14-inches (356 mm) measuring range. Internal 0.02 to 14 inches 0.5 to 356 mm
Phone: (353)-1-4502666
Code Range U306270 0-14”/0-330mm
Fax: (353)-1 4500401
Accuracy 2 µinch 0.05 µm
Price €57,000.00
Email: sales@inspection.ie
Web: www.inspection.ie
Carriage is extra on all products ex our Dublin warehouse. VAT is Extra. Offer lasts while present stock last or promotion items last