IntegraSpec Cavity Closer
[Type text]
IntegraSpec Cavity Closer Economical and easy to install completing the thermal envelope with an ICF solution
[Type text]
The Dovetail groove edged IntegraCavity Closer are easily slid into the wall system to create the window opening
[Type text]
The IntegraCavity Closer can be installed as shown without additional bracing or strapping [Type text]
The Dovetail groove allows the IntegraCavity Closer to be placed in 25 mm increments
[Type text]
[Type text]
Allowing the wall system to continue past the opening Provides additional support for the Cavity Closers and can be easily cut away after the pour allowing the web and cut piece to be reused
[Type text]
IntegraCavity Closers frame out a window opening as a wall system is constructed. No strapping, bracing or taping required
[Type text]
IntegraCavity Closers are shown with the wall system built past the opening to provide additional support. The panels are cut away after the concrete pour All materials can be reused.
[Type text]
IntegraHeader placed on IntegraCavity Closers to complete the top of the window opening
[Type text]
IntegraHeader and IntegraCavity Closer
[Type text]
The window lintel can easily be constructed with IntegraSpec’s independent panels allowing the installer access for rebar placement
[Type text]
IntegraWebs can be snapped in half to easily cradle the lintel rebar. Each half will lock into the next web above to complete the lintel
[Type text]
IntegraLintel Combines Integra Independent panels, IntegraHeaders & IntegraWebs to create a formwork for window lintel
[Type text]
IntegraSpec half webs and rebar complete the window lintel
[Type text]
IntegraSpec panels can also be ripped on a table saw to the wall core size and used for window headers
[Type text]
IntegraSpec wall system continues above the window opening to complete the lintel
[Type text]
Concrete is screeded down 50mm at the bottom of the window to allow IntegraHeaders to be placed in the sill completing the ICF window opening
[Type text]
Larger window openings are easily constructed and have Temporary support concrete placement
[Type text]
IntegraSpec Technology provides every design challenge with an easy solution
[Type text]
[Type text]
[Type text]
[Type text]
[Type text]
[Type text]
IntegraSpec windows openings can also be accomplished without bracing or supports by using the Build Thru Method IntegraCavity Closers are inserted into the ICF wall system creating a concrete dam at the window opening. The wall self supports the foam lintel without additional bracing or shoring. The panels are cut away after the concrete pour to expose the window opening
[Type text]
Front panels are left off to show the BuildThru also the placement of the IntegraSpec Header on the Cavity Closer and how the IntegraWebs support the header
[Type text]
IntegraSpec Header is fully supported by the IntegraWebs A half web is used to set the header height
[Type text]
Before the pour 150mm x 150mm viewing ports are made at the window sill height allowing you to screed the concrete
[Type text]
[Type text]
[Type text]
[Type text]
Panels are cut away and sill foam has been installed after the pour
[Type text]
EPS partially removed showing the insert in each Cavity Closer
[Type text]
Flange mounted window The metal flange is fastened to the IntegraCavity Closers stud with a coarse thread screw
[Type text]
Flange mounted window outside With a drywall return and a bull corner inside
[Type text]
Wood finished window sills and jambs
[Type text]
IntegraCavity Closers skirt the windows of this hotel
[Type text]
IntegraSpec ICF Wall system with IntegraCavity Closers skirting all openings creating a Render friendly base
[Type text]
IntegraCavity Closer [Type text]
Email: info@integraspecgb.co.uk Website: www.integraspecgb.co.uk : http://twitter.com/#!/ICF_UK : http://www.facebook.com/IntegraspecUK
[Type text]