INDUSTRIALSERVICESSAFETY OFFERS

What we have to offer...

From the start of Industrial Safety Inc., we have always wanted our customers to know that we work hard to perform service work and preventative maintenance on all of the products we sell. We did not want to hear our customers say, “We didn’t have anyone who would service our equipment.” This is unacceptable in our eyes. We have been striving to provide peace of mind for our customers from the beginning.

Our Team of talented and experienced service technicians are able to perform your service needs including, but not limited to:

FIRE EXTINGUISHER SERVICE

Annual fire extinguisher inspection, refills and 6-year maintenance.

KITCHEN SUPPRESSION

Maintenance, Inspection, Service & Installation

FIRE EXTINGUISHER TRAINING

On-site training for your employees.

EXTRICATION TOOL SERVICE

Annual inspection, service and maintenance on your extrication tools.

SCBA POSI TESTING AND SERVICE / SCBA FIT TESTING

Annual, on-site flow-testing for SCBAs and maintenance or on an “as-needed” basis. We will come to your business and perform this testing as requested.

GAS MONITOR SERVICE CENTER

Gas monitor calibration and maintenance.

OTHER SERVICE & REPAIRS

Set up hose reels.

Nozzle Repair & Upgrades.

POINTS OF INTEREST:

• You may have fire extinguishers around your workplace, used to control or extinguish fires that are small or have just begun. But did you know that the Occupational Safety and Health Administration (OSHA) prohibits employees from using this tool unless they’ve had training?

• Organizations are required to provide this training when employees are first hired and annually thereafter. Employers are als o advised to establish a policy clarifying who is qualified to use fire extinguishers, the situations when they can and should be used, and the proper procedures for their use.

• Exemptions to OSHA’s Training Requirements: 1) When the employer has established and implemented a written fire -safety policy that requires the immediate and total evacuation of all employees upon the sounding of a fire alarm and that includes an emergency -action plan and a fire-prevention plan that meet OSHA’s requirements. 2) When the company has an emergency-action plan that designates certain employees to be the only ones to use the available portable fire extinguishers and that requires all other workers to immediately evacuate the affected area after the fire alarm sounds.

Class 3 Lime Short Sleeve Moisture Wicking Safety Shirt

299-1840-(Size) $24.00

100% Moisture wicking polyester fabric, high visibility, 1 left front pocket. Lime short sleeve with black bottom front panel. Meets ANSI / ISEA 107:2015 Class 3 Standards.

Sizes: M-5XL

Class 3 Lime long Sleeve Moisture

Wicking Safety Shirt

299-1841-(Size) $27.00

100% Moisture wicking polyester fabric, high visibility, 1 left front pocket. Lime long sleeve with black bottom front panel. Meets ANSI / ISEA 107:2015 Class 3 Standards.

Sizes: M-5XL

Flame Retardant Safety Vest

299-1287FR-Z-RD-DR $16.50

Lime polyester mesh fabric with lime bind ing. D-ring opening, zipper front closure. Class 2, Flame Retardant under the ASTM test method when caught on fire, with properties dimished on wash. 2 radio clip holders, 6 pockets - 2 inside upper chest pockets, 2 outside upper chest pockets, and 2 outside lower pockets with flaps.

Iona plus winter jacket

215-F144 $84.00

Stylish, functional and durable, the F144 offers protection and warmth in extreme weather conditions. Featuring all the best elements including the Insulatex heat reflective lining panel, silver HiVisTex Pro reflective tape, zipper front closure and ergonomic shaping.

Sizes: S-5XL

HI-VIS ball cap

163-75-8205

High visibility yellow baseball style cap, adjustable velcro strap, includes reflective striping, meets ANSI HEADWEAR standard, One size fits most.

Hi-Vis Knitted Cap

163-75-8201 Yellow $12.00 163-75-8202 Orange $12.00

Beanie style knitted cap, hi-visibility, silver reflective strip, one size fits all. Available in Orange and Yellow.

Beanie led head light usb

rechargeable

215-B029 $19.00

Warm and Comfortable acrylic beanie. Rechargeable LED light can be charged in USB Port. Colors Available: Black, Grey, Navy, Orange, and Yellow.

hi-vis executive 5-in-1 jacket

215-US768 $89.00

An innovative style adaptable for multiple uses. Outer jacket contains two useful large patch pockets with hook and loop closures and a concealed hood, whilst the inner jacket has detachable fleece sleeves, 2 roomy side pockets and has full ANSI/ISE107, Type R, Class 3 certification.

Sizes: S-6XL

portwest hi-vis rain pants

215-S587 $26.00

This lightweight and extremely waterproof pant boasts a multitude for useful features including pass through pockets, extra-long side leg zippers for ease of taking on and off. It also features an adjustable snap hem and is a practical choice for keeping wind and rain out.

Sizes: S-4XL

215-US366 $52.00

Lightweight jacket certified to the highest waterproof levels. This jacket offers unrivaled foul weather protection and comfort. Hard wearing, functional, and packed full of features including a vented back cape with D-ring opening, pack away hood for easy storing, multiple pockets of ample storage, radio loop and mesh lined for optimum warmth and comfort.

Sizes S-6XL

Hi-vis softshell jacket

107-HVJS206YW

M-2XL $68.00 3XL-4XL $75.00

High visibility Softshell Jacket Class 3 and ANSI / ISEA107 Certified, wind resistant, water resistant, breathable, zippered left chest with media port, zippered front pockets, adjustable cuffs, elastic waist cord with toggles, adjustable three-piece hood.

Hi-Vis 8-in-1 Waterproof Jacket with Hi-Vis Liner

163-75-1383 $89.00

8-in-1 Transformer bomber jacket with removable liner offers 8 varieties of wearing options that include the basic, fully lined Class 3, Type R waterproof jacket, Class 2 vest, or just the Hi-Vis liner; Removable sleeves for both jacket and liner; inside breast pocket, outside slash pockets, clear ID holder, radio handset chest straps, pen/pencil sleeve pocket and a cell phone pocket.

Hi-Vis Mesh Vest with DOT Striping

163-75-3301 $26.00

ANSI 3, Type R; Hi-Vis yellow polyester mesh vest; Fabric is excel lent for warm days; Zipper front closure; DOT reflective striping; Includes two radio pockets with ID badge display, pen pockets, and generous waist pockets; Side zipper allows relief from binding while sitting down.

HI-VIS Waterproof Jacket w/ Quilted Liner or Removable fleece liner

163-75-1313 Quilted Liner $65.00

163-75-1311 Removable Fleece Liner $65.00

Meets ANSI, Class 3 Type R, High visibility yellow bomber jacket with black in all the areas that get most soiled, PU coated polyester with fully taped seams and concealed attached hood, elastic ribbed waist, wrist, and collar to keep out the cold, outside slash pockets and a cell phone pocket.

Zipper Hooded Sweatshirt Black Bottom

163-75-5325 $45.00

Deluxe high visibility yellow polyester hooded sweatshirt, black in the areas that get the most soiled, 3M reflective striping, zipper front closure, Meets ANSI and Class 3 Type R Standard.

Sizes: M-6XL

Hi-viS Waterproof/ Insulated Bib Overall

163-75-2357 $85.00

High visibility yellow/black quilted, insulated waterproof bibs, sturdy plastic shoulder strap buckles, zipper chest pocket with slash side pockets, bottom leg zippers to pull on over boots, snap closures on the bottom of the ankle hem that insure a snug fit, deep pockets on double layer knees allow for increased wear, includes removable knee pads, meets ANSI and Class 3 Standard.

Sizes: M-6XL

Radians ReversibLe Ripstop Water Repellent Jacket

109-SJ04-3SGR-(size) $69.00

Insulated and reversible, Type R, Class 3 jacket offers lightweight warmth and adaptability. Wear the Hi-Vis side to meet job requirements; wear the black side everywhere else. Featuring ripstop fabric for durability and water repellant treatment to help block light rain. Reflective elements on both sides offer visibility, and front has a reflective zipper garage. 12 pockets make this jacket a storage chest.

Sizes: S-5XL

Radians HEAVY DUTY FLEECE SWEATSHIRT class 3

109-SJ32-3ZGS $49.00

Versitile Hooded Sweatshirt with Black front bottom and Cuffs. Black color blocking helps hide dirt keeping you looking good on the job. Can be worn on it’s own or layer up by zipping it into our RW32 Rain Coat.

Radians Dewalt waterproof lightweight packable raincoat

109-DRW11-12GR-(size) $70.00

Built to provide defense against the harsh environments, this RipStop Waterproof Polyester Raincoat is durable, lightweight and comfortable. Feature rich, it blocks the wind and wet at multiple points. The front hook and loop wind/rain guard over zipper closure with bottom snap and pull tight adjustable waistline, Hook and Loop cuffs and high neck hood with extended visor all help to block the elements the job throws at you.

Sizes available: S-5X

Chainsaw chaps

129-JE-9136 $139.00

When wood cutting jobs require extra safety, Elvex JE91 chaps provide the extra leg protection needed. The JE91 series features complete wrap-around calf protection, tough 1,000-denier Cordura® nylon facing and three sets of quick-release leg buckles. Lightweight Prolar® protective pads are designed to slow down or stop the running saw chain on contact. All Elvex chaps feature easy-on, easy-off apron type design and meet the standards for the American Society for Testing and Materials (ASTM). Safety orange. Short, Medium, and Long lengths available.

Powder Free Blue Nitrile Gloves

134-GNPR-(SIZE)-1M - Call for Pricing

Nitrile Gloves are the perfect compromise between latex and vinyl. Nitrile is made from an allergy safe compound that feels a lot like latex but it’s much stronger and is more comfortable to wear. Nitrile is perfect for demanding applications, especially cleaning and dishwashing.

Nitrile Disposable Gloves

216-2920/(size)

Box of 100 - Call for Pricing

PosiShield powder free industrial grade nitrile, Beaded cuff, textured surface with prominent texture on fingertips; Black; 100/Box, Silicone-Free.

Sizes: S-XXL

Hydroflector Double-Coated Latex Gloves

157-1786P $13.00

Waterproof double thermal knit shell and double-coated latex, repels the cold and wicks away moisture. The seamless, smooth double latex coating provides a flexible waterproof barrier to keep entire hand warm and dry in cold temperatures, also provides a textured surface to increase grip control.

Sizes Available: M, L, XL

Endura Split Deer Tig Welding Gloves

193-370DTIG $16.00

370DTIG balances durability with the tactile flexibility of deerskin that offers a better sense of touch and dexterity. These TIG welding gloves features cushioned patches on the pinky side, providing comfort when resting hands against surfaces during welding sessions.

Sizes Available: M-XL