7 minute read
Gear Storage
The Ready Rack is available in a wide range of models. Garmet manufacturers specify quick, open air drying to maintain the protective qualities of fibers and liners. The open wire design of Ready Rack, along with the Dry Kwik accessories, provides for free air circulation and helps dry gear much faster. As a result, mold and mildew will not prematurely destroy the fibers of your gear and it will last longer. Dry gear reduces steam burns on fire and rescue personnel. Ready rack components are nickle plated to resist rust, then chrome plated for aesthetic appearance and finally, clear coated to protect the finish. Each unit consists of two levels of open wire shelving. The full length grid dividers separate each compartment and are easily adjustable to allow for expansion for additional personnel. Full length grid dividers separate individual compartments between top and bottom shelf levels and provide a 4” tall divider on the top shelf. A hanging pole is provided under the top shelf and runs the length of the unit. The standard units are supplied with two utility hooks for bunker pants and one name plate.
NEW TECH WALL MOUNT
Advertisement
Shelf supports include built in hanging rod supports and mounting plate. Three inches clearance from the wall gives more air circulation and allows installation around pipes and outlets. Dimensions: 21” deep x 78” tall.
18” WIDE MODEL LENGTH WEIGHT PRICE 338-NTWM-4(18) 72” 100 lbs $745.00 338-NTWM-8(18) 144” 182 lbs $1345.00 338-NTWM-12(18) 216” 267 lbs $1945.00 338-NTWM-16(18) 288” 350 lbs $2525.00 338-NTWM-20(18) 360” 435 lbs $3140.00 338-NTWM-24(18) 432” 520 lbs $3740.00 338-NTWM-30(18) 540” 648 lbs $4650.00
24” WIDE MODEL LENGTH WEIGHT PRICE 338-NTWM-4(24) 96” 120 lbs $959.00 338-NTWM-8(24) 192” 230 lbs $1619.00 338-NTWM-12(24) 288” 320 lbs $2275.00 338-NTWM-15(24) 360” 395 lbs $2810.00 338-NTWM-20(24) 480” 520 lbs $3740.00 338-NTWM-24(24) 576” 620 lbs $4340.00
MOBILE UNIT
Unit is supplied with four casters, two have foot operated brakes. Dimensions: 72” long x 21” deep x 79” tall.
SINGLE SIDED DESCR WEIGHT PRICE
338-MSS-3 24” per section 115 lbs $809.00 338-MSS-4 18” per section 125 lbs $869.00 338-MSS-5 14” per section 135 lbs $929.00 338-MSS-6 12” per section 145 lbs $999.00
DOUBLE SIDED DESCR WEIGHT PRICE
338-MDS-6 24” per section 180 lbs $1145.00 338-MDS-8 18” per section 196 lbs $1279.00 338-MDS-10 14” per section 212 lbs $1410.00 338-MDS-12 12” per section 228 lbs $1550.00
SINGLE SIDED FREE STANDING
Unit is supplied with leveling bolts for use on uneven floor. 4” tall back ledges are included for each shelf level. Dimensions: 21” deep x 74” tall
18” WIDE MODEL LENGTH WEIGHT PRICE
338-FSS-4(18) 72” 115 lbs $769.00 338-FSS-6(18) 108” 162 lbs $1185.00 338-FSS-8(18) 144” 212 lbs $1470.00 338-FSS-12(18) 216” 310 lbs $2130.00 338-FSS-20(18) 360” 510 lbs $3400.00
24” WIDE MODEL LENGTH WEIGHT PRICE
338-FSS-4(24) 96” 140 lbs $999.00 338-FSS-6(24) 144” 190 lbs $1320.00 338-FSS-8(24) 192” 260 lbs $1760.00 338-FSS-12(24) 288” 378 lbs $2525.00 338-FSS-20(24) 480” 620 lbs $4250.00
DOUBLE SIDED FREE STANDING
Unit is supplied with leveling bolts for use on uneven floor. 4” tall back ledges are included for each shelf level. Dimensions: 36” deep x 74” tall
18” WIDE MODEL LENGTH WEIGHT PRICE
338-FDS-8(18) 72” 190 lbs $1180.00 338-FDS-12(18) 108” 280 lbs $1830.00 338-FDS-16(18) 144” 360 lbs $2210.00 338-FDS-24(18) 216” 530 lbs $3210.00 338-FDS-32(18) 288” 695 lbs $4230.00
24” WIDE MODEL LENGTH WEIGHT PRICE
338-FDS-6(24) 144” 325 lbs $1075.00 338-FDS-18(24) 216” 480 lbs $2789.00 338-FDS-24(24) 288” 645 lbs $3750.00 338-FDS-30(24) 360” 785 lbs $4650.00
$750.00 $1,000.00
RRWM-5/20: 5 Compartment System $1,200.00Open loop coat hanger 338-DKH-O $14.00 RRWM-6/20: 6 Compartment System $1,400.00Closed loop coat hanger 338-DKH-C $14.00 RRWM-7/20: 7 Compartment System $1,600.00Flat coat and pant hanger 338-FDH $14.00 RRWM-8/20: 8 Compartment System $1,850.00Glove or hood hanger 338-GDH $14.00 RRWM-9/20: 9 Compartment System Helmet Holder $2,050.00338-HH $14.00
RRWM-10/20: 10 Compartment System $2,300.00
RRWM-12/20: 12 Compartment System $2,700.00
RRWM-13/20: 13 Compartment System $2,900.00
RRWM-14/20: 14 Compartment System $3,150.00
RRWM-15/20: 15 Compartment System $3,400.00
• UniMac equipment meets the cleaning requirements of NFPA 1851 standards • Faster extraction technology spins up to a maximum of 100 G-Force • Advanced Inverter Drive • M9 Control – Six cycles that can be modified to meet your laundry’sunique demands. Three water levels and up to five supply signalsfor automated dispensing of laundry chemicals • Load Capacity - 30 lbs or 40 lbs • Width/Depth/Height : 29” x 34 9/16” x 45” • Voltage/Hz # of Wires/Phase/Circuit Breaker - FLA: 380-415/50/60/3/3 15-4 • Net Weight: 460 lbs
UCN030HNFX: 30lb Washer Extractor $6,995.00 UCN040HNFX: 40lb Washer Extractor STEELBASE-8: 8” Steel Base $9,250.00 $450.00
DRY KWIK ACCESSORIES
RED RACK GEAR STORAGE •Dimensions: length determined by # of units x 20” deep x 72” tall •Red Rack components are coated with durable red powder coat finish •Adjustable boot & helmet shelves, apparel hooks and name plate 62 1-800-822-1633 www. industrialsafetystore.com
2 Compartment System 338- $610.00 25 25 4 Compartment System 338-RRWM-4/20 $1100.00 3 Compartment System 338- $840.00 5 Compartment System 338-RRWM-5/20 $1315.00 finish 6 Compartment System 338-RRWM-6/20 $1525.00 $550.00 7 Compartment System 338-RRWM-7/20 $1750.00 $750.00 8 Compartment System 338-RRWM-8/20 $2000.00 $1,000.00 9 Compartment System 338-RRWM-9/20 $2200.00 $1,200.00 10 Compartment System 338-RRWM-10/20 $2470.00
$1,400.00
$2,900.00 $3,150.00 $3,400.00 WASHER EXTRACTOR
• Can wash 1-2 sets of turnout gear per load. Full wash cycle: 25-35 minutes • Runs on 120 volts (watts per load: 110-160 watt hours) • Stainless steel inner and outer tubs (capacity: 2 cu. Ft) and has a patented tub design • Easy soft-mount installation • No transmission or agitator to replace and no lower water seals • With fewer overall moving parts; Promotes longer life expectancy • Complete with manual /manufacturer’s warranty & Follows NFPA-1851 guidelines
PPE-EW $3,750.00 TURNOUT GEAR PPE WASH
• This wash solution has been carefully developed to ensure the safe cleaning of all firefighting turnout gear and other PPE. Meets the recommendations set forth by NFPA 1851, 2008 edition • Non-corrosive to metals and will not leave a residue • Highly Concentrated formula with a pH below 9.5 • Can be used in all cleaning applications
GW101: One Gallon $28.50
Storage Racks | PPE GW401: [4] One Gallon GW105: 5 Gallon Pail $111.50 $126.50
24 www.FireSafetyUSA.com
SINGLE AND DOUBLE SIDED MOBILE RED RACK GEAR STORAGE
Dimensions: Single Sided 64” wide x 20” deep x 79” tall, Double Sided 64” wide x 40” deep x 79” tall
Single sided with three openings, double sided with three openings each side
Units are supplied with four swivel casters
Includes two foot operated brakes
Adjustable boot and helmet shelves, apparel hooks and label holder 3/20 Single Sided Mobile Rack 338-RMSS-3/20 $1025.00RMSS-3/20: Single Sided Mobile Rack $950.00 3/24 Single Sided Mobile Rack 338-RMSS-3/24 $1050.00RMSS-3/24: Single Sided Mobile Rack $975.00 6/20 Double Sided Mobile Rack 338-RMDS-6/20 $1560.00RMDS-6/20: Double Sided Mobile Rack $1475.00 6/24 Double Sided Mobile Rack 338-RMDS-6/24 $1650.00RMDS-6/24: Double Sided Mobile Rack $1550.00
FIREWIPES
• Created for on-scene decon • Helpsminimizecontact contaminants • 3-year shelf life • Individually packaged to eliminate cross-contamination • Textured on one side and smooth on the other • Sold per pack, 12 wipes per pack
FIREWIPES
DRY KWIK ACCESSORIES DKH-O: Open loop coat hanger $9.95 SUPER HANGER
DKH-C: Closed loop coat hanger $9.95 • Supports up to 20 lbs FDH: Flat coat and pant hanger $9.95 • • One piece I-Beam construction Sturdy non-corroding hanger GDH: Glove or hood hanger $9.95 • Size: 1.2” x 16.6” x 9” HH: Helmet Holder $9.95 • Available in black or yellow
BPH: Utility Hooks $3.00 SUPER HANGER $5.00
DKH-O: Open loop coat hanger $9.95
SINGLE AND DOUBLE SIDED MOBILE DKH-C: Closed loop coat hanger $9.95 RED RACK GEAR STORAGE FDH: Flat coat and pant hanger $9.95 • Dimensions: Single Sided 64” length x 20” deep x 81” High Double sided 64” length x 40” deep x 81” High GDH: Glove or hood hanger $9.95 • Each unit comes complete with; Adjustable boot shelf, Adjustable helmet HH: Helmet Holder $9.95 shelf, hanging pole- length of the unit, 2 Apparel hooks per BPH: Utility Hooks $3.00 locker unit, Name plate per locker unit, heavy-duty legs for elevation.
GLOVE & BOOT DRYER
• Heat or no heat • 3 hour timer • One push button disassembly • Dry time: 1-2 hours
