ToolTruck August Summer Specials

BUYS11577 & S13529

FOLLOW US ON SOCIALS

36mm

Supplied on a socket

M18 FUEL POWER PACK

£535.00

M18

TYRE INFLATOR - NAKED

BACK IN STOCK

MWM18BI-0

• Compact lightweight design for fast inflation of car, light truck and compact equipment tyres.

• Top off 235/65R16 sprinter tyres in under 1 minute

• Top off up to 30 tyres on an M18 5.0 battery pack

• 150 PSI max pressure capacity

• Auto shut-off technology inflates to selected pressure & prevents over inflation

• Supplied with a ball inflation needle, presta chuck, inflator nozzle and schrader chuck

• Illuminated LCD display with a digital pressure and fuel gauge that displays remaining charge

£181.65

POWER UP WITH MILWAUKEE’S BEST M18 FUEL DUO

M18 FUEL 1/2in High Torque

Impact Wrench

• Delivers 1356 Nm fastening torque in a compact size of 213mm

• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings

• ½in friction ring reception

• New LED light is 40 percent brighter than previous model

• Mode 4 bolt removal, provides maximum nutbusting of 1898 Nm then shifts to 750 rpm for outstanding control when removing fasteners

M18 FUEL 115mm Braking Variable Speed Angle Grinder

• 5-step speed dial ideal for working with stainless steel and aluminium & for rust and paint removal

• 115 mm keyless guard for great cutting capacity and fast guard adjustment without using a key

• Delivers performance similar to a corded 1200W grinder

• Non-lockable safety paddle switch with linelock-out function to prevent automatic start up

• Anti-vibration side handle for lower vibration

Also Included:

• x2 M18 5ah Battery

• x1 M12-18 Fast Charger

• Supplied in a Packout case

manage the direction of sparks/ chips

• One-hand design allows working in tight areas and ideal for overhead work

• 360° tool-free head adjustment allows the best handling for each working environment and provides compact storage

• Dual action safety trigger with lock-on function for less strenuous on longer working periods

• Tool-free belt change

• LED lights up your work area for better visibility

• Comes with x2 60G belts

SPARE BELTS ALSO AVAILABLE

2711 NM NUT BUSTING TORQUE

ONE KEY

INTEGRATED BLOW COUNTING SENSOR

D HANDLE

2576 NM FASTENING TORQUE

ENABLES BOLTS UP TO M42 TO BE UNFASTENED

4 MODE DRIVE CONTROL

SUPERIOR HIGH OUTPUT BATTERY

1” DRIVE D-HANDLE HIGH TORQUE IMPACT GUN KIT SOCKET BUNDLE

MWM18ONEFHIWF1D-121C

• 2576 NM of fastening torque replacing AC, petrol or pneumatic solutions

SAVE £80!

• 2711 Nm of nut-busting torque that enables bolts up to M42 to be unfastened

• The 4 -Mode DRIVE CONTROL allows the user to shift into four different speed and torque.

• Tri-LEDs deliver high definition lighting to increase workspace visibility

• Works with all MILWAUKEE® M18™ batteries

• Kit Includes - M18HB12 12Ah High Output Battery, M12-18FC Fast Charger & Tool Bag

BUY

M12 - M18 FAST CHARGER

MWM12-18FC

• Recharges all M18™, M14™ and M12™ REDLITHIUM™ battery packs

• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles

• M12™ REDLITHIUM™ 2.0 Ah / 3.0

Ah / 4.0 Ah / 6.0 Ah battery packs

recharge in 28 min / 45 min / 57 min / 90 min or less

• M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs

recharge in 26 min / 47 min / 59 min / 68 min/ 95 min or less

£61.30

5PC 1" Dr Deep Impact Socket Set

MS100DD05

Includes Sizes: 24, 27, 30, 32 & 33mm

CORDED 240V POLISHER WITH ELECTRONIC

VARIABLE SPEED

MWAP12E

• 1200 watt motor

• Ergonomic design for long work shifts

• Special gear for high spindle torque and ideal polishing speed

• Variable speed selection for ideal speed

• Thermal overload protection

• No load speed limitation

• 6m cable

• Tool is supplied with backing pad only, polishing sponge not included

£262.65

BOTH FOR £999.95

TORQUE MASTER TORQUE WRENCHES

Our range of high-quality, high-precision Torque Master torque wrenches are exclusively available to ToolTruck.

With a Torque Master torque wrench you can quickly and easily adjust the torque setting in both Nm and Ft/lbs with the secure locking ring adjuster.

The knurled anodized aluminium handle offers superior grip and supplements the high quality feel of the tool.

They also have clockwise and counter-clockwise mechanisms allowing them to be used for tightening and loosening with ease.

SOLVENT SPRAYER 1 LITRE

T686100

• Pump action pressurised container

• For use with hydrocarbon based solvents and degreasers

• Viton solvent resistant seals

• Adjustable nozzle

PETROL COMPRESSION TEST KIT

MV5530

• 0-300 PSI

• For dry and wet compression tests to detect ring, bore and cylinder head problems on small engines, motorcycles, marine engines and cars.

• 70mm gauge with 250mm hose and quick release coupler 14mm shortthread adapter with 165 and 305mm hoses 14mm long-thread adapter with 305mm hose 18mm short-thread adapter with 305mm hose 14mm short-thread x 18mm long-thread adapter 10 and 12mm thread small engine adapter

• Quick release air hold adapter

• Polyamid pump £129.75

Torque Wrench 1/2” DR

T200340

• 1/2” Drive

• 48 Tooth

All our Torque Master torque wrenches come complete with a calibration certificate. 1/2"

• 60-340 NM

• Matt Black Handle

Torque Wrench 1/4” DR

T200025

• 1/4” Drive

• 48 Tooth

• 5-25 NM

• Matt Black Handle

£125.30

Q-BOND QB2 Super strength bonding adhesive

DIAGNOSTICS

POWER PROBE 3

SUPPLIED IN CLAM SHELL PP3CSCARB

The PP3 is a Voltmeter and Continuity Tester, with Audible & Visual indicators along with two LED headlights to light up your work area. This circuit tester also supplies Battery Voltage or Ground to activate components. This powerful time-saver tool is perfect for every level of technician.

Features:

• Supplies Power and Ground

• Digital Voltmeter with Min/Max Voltage Capturing

• Test Light

• Short Circuit Indicator

• Relay & Component Tester

• Continuity Tester

• Bad Ground Indicator

• 4mm Banana Jack

• 20 foot Jumper Lead Set

• 24 Volt Ready

• Powered by vehicle battery

• Momentary On SPDT Switch

• Slim Design for Fitting into Tight Places

• Gold Plated Brass Probe Tip

• Directed LED Head Lamps to Illuminate Test Area

Kit Includes:

• Power Probe III

• 3 inch Extension Probe

• Battery hook-up clips

• Instruction manual

INFRARED THERMOMETER

PPIR500

• The No-Contact Thermometer detects the infrared rays that an object emits. The instrument focuses the infrared energy of the object through the lens and onto a sensor. As a result, the instrument changes the surface temperature into an electrical signal, and a microcomputer calculates and displays the measured temperature on the LCD.

• Temperature in both °C / °F

• Response Time 1 second

• Weight: 160g

• Power: 2x1.5V AAA

DC VOLT METER

PPTVM01

• Easy to use a voltage tester, Perform battery checks and voltage checks

• This voltage tester is self-powered with an 18” cable. LCD displays voltage readings 5 volts to 35 volts

PIERCING PROBE KIT

PPTK0003

• 1- Yellow 4mm Banana Jack 8-18 gauge wires

• 1 – Green 4mm Banana Jack 20-28 gauge wires

5 VOLT ADAPTER

PPT5VA

• Safely test computer-sensor circuits

• Provides 5-Volt reference Voltage

• 12-24 Volt input

• 5-Volt output

• Standard 4mm banana connector

• Connects to any Power Probe circuit tester

30PC OIL FILTER WRENCH SET - CUP TYPE

TT610

• Suitable for canister style fluted filters

• 3 leg Oil filter wrench 29 Cup wrenches

• Sizes: 66-108mm

FLOW METER AND ADAPTOR SET FOR COMMON RAIL DIESEL

£92.10 £57.90

• Electro black coated and supplied in blow moulded storage case

TT19AT

• Designed to measure the amount of the fuel that every injector returns to the deposit tank rapidly and effectively

• Precise scale tools make the fuel flow diagnostic work accurately with precise measuring

• A kit that will fit for all major injector types: Bosch, Siemens, Delphi, and Denso

Supplied in a blow moulded case and includes:

x18 Copper Injector adapters

x6 Plastic injector adapters

x6 Thick measuring cups with soft pipe

x6 Slender measuring cups

ONLY £252.45!

TT8269B

This universal adaptor set is specially designed to combine vibrations and pneumatic force for easy removal of seized diesel injectors

It covers 99% of Bosch, Delphi, Denso, and Siemens CR injectors which have solenoid coils or screw connections

Includes:

• x1 vibration cylinder

• x1 air hose

• x20 adapters

• x1 roll of seal tape

• Supplied in a blow moulded case

24PC PNEUMATIC INJECTOR PULLER SET

Oil Filter Sockets Sizes 24-38mm T344200

Long Torx Screwdriver Set 6pc T10-T30 Length - 250mm T263900

Plier Long Nosed Set 2pc T241100

8pc Screwdriver Pro Set KTI11008

8pc Ratcheting Screwdriver Driver Bits Included S52373

Internal 1/4 & 3/8 Dr Torx Socket Rail T10 - T50 9Pc KTI22800

Abrasive Pad Scraper for Cleaning Metal Surfaces L52600

7PC OXYGEN SENSOR

SOCKET SET

TT410

• Designed to remove oxygen sensor sockets.

• Slot in each socket accommodates the glow plug cable

• 1/2in Dr Sizes: 29x90mm, 27x85mm, and 22x50mm

• 3/8in Dr sizes: 11/16in x 74mm, 22x80mm, 22x90mm, and 22x30mm

• Suitable for Audi, BMW, Citroën, Ford, Mercedes, Peugeot, Renault, Skoda, Vauxhall, and Volkswagen

PNEUMATIC CV BOOT FITTING TOOL

DURAGUN3

• Reduces fitting time to approximately 20 minutes

• Lightweight, only weighs 1.9 kg

• Designed for single handed operation

• One model that covers all vehicle models

• Working pressure 4 to 7 bar

• Standard airline fitment

• Can be disconnected from the airline for fitting

• Supplied ready assembled

• Use with stretchy Duraboot® and Universal CV boots

• Can be used for inner boot alsosimply turn boot inside out

12

TT12THWH

• 12-ton hydraulic ram

WHEN ASSEMBLED

• Especially for glued and rusty drive shafts

• Fits on 4- and 5-hole hubs

• Hole circle diameter of 98 to 125 mm

• For SUVs and light trucks

• Spindle can be turned by hand or ratchet

• Applicable to Audi / Citroen / Fiat / Opel / Peugeot / Renault / Seat / Skoda / Volvo / VW

• Supplied in blow moulded case

• Assembly required

SLIDING HAMMER WITH HOOK

T674110

• Heavy duty slide hammer with Hook

PRESS AND PULL SLEEVE KIT

TT27PPK

• For the removal and installation of bushes, bearings and seals

• Fully universal applications on both cars and LCV

• 5 x pulling spindles with nuts and thrust bearings: M10, M12, M14, M16, M18

• 22 x press-on sleeves: Inside:

• Huge 2.5kg hammer. For extracting wishbone's, ball joints, wheel bearing housing, straightening body work on car bodies

• The design will allow this item to be used on a large amount of applications

• 1100 mm Long

TON HYDRAULIC WHEEL HUB & DRIVE SHAFT PULLER

£32.50

TWINGRIP SLIP JOINT PLIERS

K8201200

• Unique combination: Front grip and side grip function, box joint, push button adjustment.

• Large front and side gripping capacity for diameters and widths across flats 4 - 22mm

• Gripping, tightening and loosening screws with worn heads and threads

8PC DOUBLE ENDED RING SPANNER SET

T212400EVA

• Sizes: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 21x22mm

• Deep offset

• Supplied in EVA Foam

£73.60

3PC PLIER SET IN EVA FOAM

S90903EVA

Set contains:

• 180mm Side Cutters,

4PC PRY BAR SET

MW48229214

• I-Beam design for added durability

£70.00

• 200mm Long Nose Pliers,

• 200mm Linesman Plier

£78.35

• All-Metal Core for improved durability

• Hammer-ready strike cap improves leverage when working in tight spaces

• Comfortable Tri-Lobe Handles for grip

• Curved claw design reduces damage when pulling nails

• 200mm, 300m, 450mm & 600mm

SLEDGE HAMMER 4LB

T254104

• Fibreglass handle with rubber grip

• Length: 405mm

£24.55

11PC OIL FUNNEL ADAPTER SET

TT13084E

• 1x 2 Litre Topping-Up Funnel

• 1x Angle Extension

• 1x Bayonet Adapter Red for Audi, BMW, Mercedes, Porsche, Volvo, VW

• 1x Bayonet Adapter Yellow for Toyota, Lexus

• 1x Renault Thread Adapter M34 Black for Renault

• 1x Renault Bayonet Step Adapter Black for models with bayonet Step cap

• 1x Renault Bayonet Adapter Black for models with bayonet cap

• 1x Threaded Adapter M35 Orange for Ford, Jaguar, Land Rover, Mazda

• 1x Threaded Adapter M32 Green for Acura, Dodge, Ford, Honda, Jaguar, Jeep, Land Rover, Nissan

• 1x Threaded Adapter M42 Black for Subaru

• 1x Threaded Adapter M37 Blue for Lotus, Toyota

DOUBLE BOX RATCHET WRENCH XL REVERSIBLE IN EVA FOAM

TTXLDB2127

•72 tooth ratcheting system provides high torque and only a 5° handle swing for working in tight areas

• Multi-drive 12 point design can be used on 6 point, 12 point, square, Torx®, and spline fasteners

• Reversible with easy one hand direction change button

• Full polish, chrome plated finish

• Includes: 21 x 22mm & 24 x 27mm

£99.95

TOP SELLER

CLAW PICKUP TOOL

M16

• A flexible tempered spring steel shaft bends into tight spaces to retrieve dropped small items and tools

• Spring claw opens wide to pick up items

• Can be used to help unclog drains, pull wires, hold hot automotive parts, and more!

LANG MINI POCKET PRY

AE853-06-3

Mini Pocket Pry Bar 5 inches long 27 degree offset

MINI BUTANE TORCH

KTI70054

• Mini butane torch with solder head

•Piezo-electric ignition with locking safety mechanism

•Anti-flare

•Temperature and flame control, up to 2372 degrees Fahrenheit jet flame

•Removable safety stand

•Mini butane torch with solder head & has many uses: solder copper pipes, thaw frozen pipes, repair gutters, remove paint and putty, light fireplaces, cooking torch and all other professional repair jobs.

4PC HOOK AND PICK SET XL CHP4-L

• Complex, Hook Pick, 90, Straight Pick

• Length: 250mm • Supplied in a wallet

FOLLOW US ON SOCIALS @TOOLTRUCK-UK!

100PC BIT SET

AST9448

• Essential for car, machine tool, household appliance and electronic repairs

• Chrome vanadium adapters with satin finish

• Blow moulded case for easy storage and transport

• Includes: x2 1/4Dr socket adaptors, x1 1/4Dr ratchet adaptor, x1 magnetic bit holder, x1 wing nut driver, x9 TX Bitstamper proof, x9 TX bits, x3 clutch bits, x3 torq bits, x3 spline bits, x4 tri-wing bits, x4 square bits, x4 spanner bits, x9 flat bits, x8 Phillips bits, x8 Pozidrive bits, x12 hex bits - tamper proof and x19 hex bits (metric/imperial)

TRAY ORGANISER BLACK

E5011

• 405 x 280 x 38mm

• Fuel and solvent resistant

• Fits shallow drawers in standard tool boxes

• ABS plastic and impact resistant

SPANNER RACK PAIR

T721100

• Able to hold 32 tools

• Length 580mm

• With self adhesive strip

SOCKET RAIL RACK LARGE

T712100

• 1/4", 3/8", 1/2" drive 20 x 1/4" clips 30 x 3/8" clips 30 x 1/2" clips 410x150mm 80 Clips

• Steel panel comprising of four 410mm rails and clips

• Suitable for retaining 1/4", 3/8" and 1/2" Drive sockets

MAGNETIC TRAY

RECTANGLE

S95052

• 240 x 142 x 35mm

• 2 Permanent magnets with rubberised protection

WRENCH GRIPPER

E5088

• Holds 15 tools

• Transportable

• Holds tools securely

• Fuel and solvent resistant

• Wall mount feature

SOCKET HOLDER METRIC

HA1202 1/2 Drive

HA1402 1/4 Drive

HA3802 3/8 Drive

• 26 sockets are easily visible

MAGNETIC TRAY ROUND

S95051

• 150 x 25mm

• Permanent magnet with rubberised protection

MINI SCRAPER

KTI70016

• Miniature Razor Blade Scraper

• Grip-coated handle for better comfort and control USE TOGETHER

100PC SINGLE EDGE BLADE SET

AL66392

5PC AUTOMOTIVE PLASTIC TRIM & PRY BAR SET

S46715

• Manufactured from tough anti-damage plastic to minimize damage and marking

VISE-GRIP LOCKING

C-CLAMP 11R

V11R

• 102mm jaw capacity provides greater versatility in clamping a variety of shapes

• Classic trigger release designed to provide maximum locking force

• Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release

• Fitted with regular tips – makes it ideal for car body work, welding and sheet

T245400

• 300mm 360 degree Rotating head.

• Interchangeable nose piece.

• For 3/32, 1/8, 5/32 and 3/16in rivets.

THUNDERWEB 19PC HSS DRILL BIT SET

MW4932352374

• 135° Split point - Precision starting, drill bit won't walk on material surface

• Polished finish reduces friction and extends drill bit life

• Impact resistant ABS case with added rubber corner protection

MW48224533

• Metal Tin Snips , Left + Right and Straight Cutting

3PC METAL SNIPS

SWIVEL HEAD RIVETER

FOLLOW US ON SOCIALS @TOOLTRUCK-UK!

WORK-GUARD SUPER STRETCH CHINO SHORTS R471X Sizes S-XXL

Manufactured from nylon filled polymer

Increased window size ensures clearer, easy to see readings

WORKFORCE SUEDE SAFETY TRAINER

Sizes 7-13 WF37

Fast Inflate and deflate

TOOLTRUCK XL MECHANICS MAT TTMECHMATXL

• 980 x 380 x 30mm

• Made from highly durable foam

• Fuel and oil resistant

• Protects the user against cold and damp conditions

Textured thumb lever allows greater control and comfort when inflating or deflating

TOOLTRUCK POLO TTPOLOSHIRT/M/L/XL/XXL/

AIRLITE ECO TYRE INFLATOR 0.4M PCLLAG1H03

AIRLITE ECO TYRE INFLATOR 0.4M PCLLAG1H03 £57.05

Keep MegaCool this summer

With the MEGAPLAN

MEGA COOL 320

MEGAPLAN MEGA COOL 320

The Hofmann Megaplan Megacool 320 is ideal for the customer who wants to simply connect and walk away, it is a fully-automatic vehicle air-conditioning recovery system for cars, vans, electric vehicles, light and heavy commercial vehicles and available in R134a and R1234yf gas.

Fully Automatic feature-rich, a Service Station for new & old gas. The Megacool 320 system comes with a design variation for use with both new & old gas types. Supplied by one of the world’s leading manufacturers of air conditioning recharge systems , manufactured in Italy, this system will take care of all of your air-con recharge needs!

MEGACOOL 320 YF FOR R1234YF REFRIGERANT £3350 +VAT

MEGACOOL 320 FOR R134A REFRIGERANT £3195 +VAT