ToolTruck June 2023 Offers

JUNE

7 Drawer Tool Cart

£995.00

• Integrated 240v Power Strip with 2x USB ports

• Locking hinged lid with 7 locking drawers with rolling bearing slides

• Anodized aluminium drawer pulls

• Integrated pry bar & long tool holder (Both Sides)

• Protective bumpers

• 8PC EVA liner set

• 5”x 2” swivel casters

• Lift & Latch Drawer Handles

• Dimensions:

The Maestro by Power Probe Tek: a multi-use Circuit-Tester with built-in This tool simplifies the testing of fuse boxes, verifies correct operation of motors, lights, relays, sensors, wires, and communication-circuits.

▪ The large LCD colour display makes for easy viewing in direct sunlight or complete darkness

▪ The Maestro wirelessly pairs with the Power Probe Tek App. This allows for a wireless remote display as well as data streaming or recording. All of this information can be emailed, exported or simply saved for future reference. The Power Probe Tek app is available for iOS and Android platforms.

▪ Includes: PP Maestro, Alligator Clip, Clip Set, 4” Probe Tip

▪ 2 Year Warranty

8pc Test Lead Set

T511210

▪ Suitable for any Digital Multimeter with standard banana plugs

▪ 4mm Plugs

▪ Strong crocodile clips open to 26mm

▪ Cable length: 1.2 m

▪ Wire piercing probes and H/D pierce

12PC Terminal Tool Set

T531100

▪ For removing wires from terminal block without damage

▪ Red for most vehicle systems

▪ Green for GM C3 systems

6pc Noid Light Tool Set

T526100

▪ Checks fuel injection signal faults.

▪ For injector harnesses inc. GM PFI, Ford TBI, GEO TBI, Bosch PFI, GM TBI and GM SCPI

16pc Testing Leads Accessories

T511215

▪ For use on 6V-24V circuits.

▪ Use with multimeter or tester.

▪ Test probe and banana plug

▪ Female flat and round plugs

Cat 4 Multimeter

PPDMM

• This CAT-IV 600V Automotive Digital Multimeter by Power Probe is versatile, accurate and rugged with Large LCD Screen with Bright Backlight. Measures AC/DC Voltage and Current, Resistance, Frequency, Temperature, and Capacitance.

• Features: Data Hold, Min/Max Capture, Relative Measurement, Diode/Continuity Tester. Perfect for Automotive use with Loud Indication Tones, 15 min autooff function, rugged rubberized housing.

• Digital Volt and Ohmmeter for circuit testing

• CAT-IV 600V Hybrid Safe AC/DC Voltmeter

• Measures Voltage from 0.1mV to 600V

• Measures Current from .01mA to 10 Amps

• Measures Temperatures from -4° ~ 1832° (-20° ~ 1000°)

• Measures Resistance/Diode/Continuity 0.1Ω to 60M Ohms

• Measures Capacitance 0.0001μF to 60,000μF

£123.80

Tooltruck Cordless Circuit Tester

TTCT330

▪ 3-24V detection range of DC voltage

▪ Bi-directional polarity testing: Power and Ground

▪ Dual colour LED indicates red for power and green for ground on 6V, 12V, and 24V systems

▪ Power and Ground

▪ Compact size for use in tight access areas

▪ Computer safe

▪ For use on automotive, commercial vehicle and equipment repair

£29.95

Power Probe 3 Multimeter

Lead Set Gold Series

PP3LS01

▪ Power Probe 3 combined with the Gold Series Lead Set makes this kit the ultimate in circuit testing diagnosis. The best sidekick to the PP3 is a kit with different connectors, adapters, and extensions. The PP3LS01 was designed to increase the usability for the Power Probe 3 while diagnosing electrical circuits

▪ Power Probe 3, 4MM Female/Female adapter, 4MM Male/Male adapter, Small piercing probe, Large piercing probe, Cigarette lighter adapter, Alligator clip adapter, 20ft extension, Battery clipset, Probe Tip, 1ft Lead, 3ft Lead, 6ft Lead

FEATURES:

• Activating components out of the vehicle’s electrical system

• Voltage & Polarity testing

• Continuity testing

• Activating electrical components in the Vehicle

• Activating electrical components with ground

• Testing trailer lights and connections

• Checking for bad ground contacts

• Red/Green Indicator & Audio Tone

£188.80

Mechanics Stethoscope

T584100

▪ Pinpoints the source of noises in engines, transmissions, differentials and bearings

£14.90

M12 Fuel Sub Compact Impact Wrench 3/8

" Kit

MWM12FIW38-622X

• More power, more compact, more control

• Up to 339 Nm of maximum torque

• 3/8" anvil with friction ring for quick and easy socket changes

• Brushless POWERSTATE™ motor delivers more power in a more compact size

• REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance

• REDLITHIUM™-ION battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life

• Individual battery cell monitoring optimises tool run time

• Better access in tight spaces with an overall length of only 121.9 mm

• 4-Mode DRIVE CONTROL with autoshut off mode, offers the user precise control

• Bright LED workspace illumination

• Includes: 1 x M12 B6, 1 x M12 B2 Battery packs, C12 C Charger, HD Box

£249.95

DONT FORGET

MLW49-16-2554 Boot Cover for MWM12FIW38-622X PROMO PRICE: £26.80

POWER TOOLS

M18 One Key Fuel Impact

Wrench with 3/4"

MWM18ONEFHIWF34-502X

Friction Ring Kit

▪ The M18 FUEL™ high torque impact wrench with ONE-KEY™ technology delivers 2034 NM of nut busting torque in a compact size of 213 mm, which gives more access in tight spaces

▪ The 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility

▪ Mode 4 bolt removal, provides a maximum nut busting torque of 2034 Nm then shifts to 750 rpm for outstanding control when removing fasteners

▪ The integrated blow counting sensor enhances the consistent repeatability of the chosen torque setting

▪ ONE-KEY™ tool customisation allows the user to optimise their tool for specific applications and cloud based inventory management that supports both location tracking and theft prevention

▪ Kit Includes - 2x 5.0ah Batteries, FC Charger & HD Case

£548.50

DONT FORGET

MW49162767

Boot Cover for MWM18ONEFHIWF34-502X

PROMO PRICE: £48.25

10PC Stubby Spanner Set

T211200EVA

• Includes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

£59.95

Crowfoot Wrench Set

14PC 27-50mm in EVA Foam

T214100EVA

• Sizes: 27, 29, 30, 32, 33, 34, 35, 36, 38, 41, 43, 46, 48, 50mm

• Supplied in EVA Foam

£142.95

M12 High Speed Ratchet 3/8" Kit

MWM12FHIR38-201B

• Up to 47 Nm of max torque and 450 RPM, this tool delivers faster application speed and increased productivity for the professional user

• 19 mm low profile head allows users better access in tight spaces

• Variable speed metal trigger provides ultimate control of the tool

• Industry leading FUEL™ technology combined with a reinforced mechanism for greater durability

• Rubber overmold withstands most corrosive materials and provides increased comfort

• LED light illuminates the work area while the on-board fuel gauge displays remaining run time

• Fastening and removing of 210 M8 bolts with one battery charge M12B2 for all day work

• REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load

• REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life

• Kit Includes: 1 x M12 B2 Battery pack, C12 C Charger, Tool bag

£231.10

M18 FUEL Sawzall Kit

MWM18FSZ-501X

▪ Brushless POWERSTATE™ motor for up to 5x longer motor life and up to 30% faster cutting

▪ Patented gear protecting clutch - extends gear and motor life by absorbing high impact forces caused by sudden blade lock-ups

▪ Wear resistant lever actuated FIXTEC™ blade clamp provides fast and easy blade changes

▪ Metal reinforced battery connection provides improved durability and battery retention over life

▪ Built-in LED light illuminates the work surface while cutting

▪ Adjustable shoe for optimised use of saw blades

▪ Integrated battery fuel gauge

▪ Durable metal rafter hang hook for work space management and safety

▪ The DNA of our FUEL™ platform redefines the balance of cordless technologies.

£331.60

5PC Metric Double Box Spanner Set

MTNRM6

• Extra long, flexible, reversible and versatile

• Comes with a patented 90 tooth design which is excellent for tight working spaces

• The 180° rotating head on both ends allows the tool to flexibly bypass obstacles for easy use at any angle

• Internal gear mechanism and Spherical profile (Spline Plus) for optimum performance

• Raised box end gear provides more surface contact and access to recessed fasteners

• Includes: 8 x 10mm , 12 x 14mm, 13 x 14mm, 16 x 18mm , 17 x 19mm

£28.70

14PC 6 Point Combination Wrench Set

GW81925

• 15° offset for better access in tight spaces

• Off-corner loading design on box end provides better grip and reduces fastener rounding

• Open end off-corner loading design provides up to 25% more torque

• Size conveniently stamped on the head and beam for quick identification

• Manufactured from alloy steel for better strength and longer tool life

• Bright, full polish chrome finish wipes easily clean to resist rust and corrosion

• Non-Slip

Flare Nut Spanners

Metric

S33720

• Designed for Soft Metal Flare Nuts

• Sizes: 9x11, 10x12, 13x14, 15x17mm, Supplied in Tray

£64.95

Brake Bleeder Wrench 12pt

T414370

• A 7 piece brake bleeding kit which comprises of 6 wrenches with integral, captive sockets and a silicone bleed hose fitted with an inline one-way valve.

• The wrenches are colour coded for easy identification - this kit is ideal for workshop or home use, as it covers a wide range of vehicles

• Wrench sizes: 7, 8, 9, 10, 11 & 12mm - all colour coded

• Set comes with 1.2m silicon hose and check valve

• Ideal for bleeding brake and hydraulic clutch systems

40pc Brake Wind Back Tool Kit

TT40BWB

• Comprehensive master set of adaptors to suit a wide range of vehicle applications

• Suitable for push-back and wind-back brake pistons

• Includes left and right-handed thrust bolt assemblies, caliper removal tools and grease container

• Precision made adaptor plates with thrust bolt assembly and reaction plate

£102.95

£29.95

One Man Pressure Bleeder

T414100

• Works from air pressure via the car tyre valve.

Brake Pipe Clamp Heavy Duty

T413200

• Length: 200mm

• For use on brake or fuel hoses

£13.70

8PC Brake Gauge Set

T411700

Colour coded gauges indicate thickness of brake lining left on brake shoe

Green: 8, 10, 12mm

Yellow: 4, 5, 6mm

Red: 2, 3mm

£19.30

£17.90

Brake Calliper double sided File

T411501

• 150mm

• For removal of brake dust, rust and dirt when replacing brake pads

£9.85

Brake Caliper Brush

T677150

• Slim design for cleaning brake pad seating areas in callipers

3PC Brake Pin Punch Set

T411100

Includes: 3,4 & 6mm

£14.45

£141.65

Brake Fluid Boiling Point Tester

T512200

• Brake Fluid Tester Boiling Point Measuring System

• For measuring the boiling point of brake fluids

• Boiling point temperature is used to accurately determine the amount of water in brake fluids

• Also suitable for measuring the temperature of other liquids when using a thermocouple

• Suitable for cars, motorcycles and pickup trucks with brake fluids DOT 3, DOT 4 or DOT 5.1

• Power: 12 V automotive battery

• Testing current: 5 - 7 A

• Working environment: 0 - 50 °C

• Boiling point measuring range: <= 320 °C (<= 608 °F)

• boiling point measuring accuracy: +/- 5%

• Temperature measuring range: -60 °C to 500 °C (-76 °F to 932 °F)

• Temperature accuracy: -20 to 500 °C +/- (1%+3digits)

BRAKE TOOLS

Brake Pipe Flaring Tool Kit in EVA Foam

T413700

• Dual head for SAE and DIN flares

• Suitable for 4.75mm and 3/6” pipe diameters

• Suitable for on and off vehicle use

• For copper, copper-nickel & steel brake pipes

£66.10

Brake Calliper Thread Repair Set

T411600

• Inserts with copper ring

• M9x125

• Special Titanium coated core drill

• Special tap M9x1.25 Hex key 7m

• For repairing threads on single piston sliding callipers

• Supplied in a plastic case

£66.25

18PC Spring Strut Tool Set

TT18PCSST

▪ Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut

▪ The go-through design of the socket and ratchet allows the extension to pass through the middle

▪ To be used in conjunction with a 1/2”Sq drive ratchet or power bar

£119.95

44mm 1/2" DR 6PT Ball

Joint Impact Socket

PSA Vehicles

T432210

for

▪ Applicable to screw-in type suspension ball joints of 44mm as found at the front axle of Citroen, Peugeot and Toyota vehicles.

£21.70

Ball Joint Separator

£13.95

Ratcheting Bearing Puller

GRO2J

▪ 2 Ton Load

▪ QUICK &CONVENIENT TO USE GEAR PULLER UP TO 5X QUICKER THAN TRADITIONAL PULLERS

• Jaws can also be reversed for internal or external pulling of gears & bearings

EASY ACCESS - The slim profile of jaws enables convenient access to hard to reach bearings & gears

STRENGTH - Jaws forged from Chrome Molybdenum steel with accurate heat treatment for enhanced strength & wear resistance

£39.95

Rear Hub Socket For Ford Transit

T431155

For use on Ford Transits 2014 onwards

£28.45

▪ For the professional loosening and tightening of front wishbone screwin type suspension ball joints. An indispensable tool when replacing damaged or worn suspension ball joint in these applications.

Wheel Hub Grinder

T431420

▪ This one simple attachment quickly and effectively cleans the wheel and hub which is prone to corrosion and wear.

£35.70

51pc Bearing Race Seal Driver Set

TT51SDS

▪ Set of 49 square edged heavy-duty steel drivers from Ø18mm to Ø74mm.

▪ Suitable for installation of bearings or seals without damaging the bearing, seal or housing

▪ Adaptors can be used in a standard workshop press

▪ 18-65mm

£84.95

Wishbone Lever Tool

TT1374

▪ The wishbone extractor tool is for pushing down the wishbone and other suspension parts during the servicing of the drive shaft or during the replacement of the wheel bearing

▪ For safe and comfortable completion, simple and easy to use

▪ Comfortable rubber grip

▪ Sliding adjustment for easy positioning

▪ Includes: x1 Wishbone extractor tool, x1 Adjustable canter lever hook, x2 Gasket, x1 Nylon lock nut

£69.45

Heavy Duty Coil Spring Compressor

TT1000CSC

Heavy duty McPherson strut spring compressor which fits most vehicles.

NOT for use with Air Guns

Max Load: 1020 kg

Max distance 305mm

Jaw 1 coil range: 80 - 115mm

Jaw 2 coil range: 110 - 150mm

£178.50

£85.75

Inner Tie Rod Tool Set

TT5531

▪ For the removal and installation of the track rod (steering arm) from the steering rack in insitu

▪ Includes three separate heads: 30-35mm, 35-40mm & 40-45mm

▪ Complete with drive shaft - length 405mm

▪ Drive 32mm Hex or 1/2”Dr

3PC 1/2" DR Flip Socket Set

T136000EVA

• Designed to aid the removal of wheel nuts with damaged, distorted or missing caps found on all modern car models

• The flip design offers two sizes on the same socket and has a thin wall for better access

• The socket has an internal square drive of 1/2”

• Supplied in EVA foam

• Sizes - 18.5 / 19.5 mm, 21 /21.5mm, 22 / 22.5mm Ford, Land Rover, Range Rover, Vauxhall, Toyota, Nissan Honda, Chrysler, Dodge & More

Centre Lock Nut Socket for Porsche

T431160

• This tool is designed to remove or install center-lock wheel nuts on Porsche 997, 991, GT2 and GT3 models.

• Drive 3/4 inch, tightening torque if necessary above 500Nm

Universal Locking Wheel Nut Removal Kit

TT319RK

• Very effective and a must have workshop tool

• Kit includes shroud which protects the wheel against any damage

• Simple to use master kit has the capability of removing practically any locking wheel nuts

Blade A for TT319RK

TT319RK-06

Blade B for TT319RK

TT319RK-07

Blade C for TT319RK 10pk

TT319RK-0510PK

1/2"DR Flip

Socket 27 x 27-5mm

T136027

• Designed to use with 1/2” short extension

• Damaged wheel (lug) nut removal sockets

• Overall length: 63mm

• Ideal for Landrover and Range Rover 27mm chrome covered nuts that have swollen

5pc Wheel Hanger Set

T411200

▪ Save energy and time when changing tires and wheels

▪ Also provides easier work for disc brake services, preventing brake disc from wobbling

▪ Includes: M12 × P1.5, M12 × P1.5, M14 × P1.25, M14 × P1.5 & M16 × P1.5

▪ For use on: Lexus, Toyota, Volvo, Audi, Alfa Romeo, BMW, Mercedes-Benz,Mini, Porsche, Vauxhall, Volvo, VW, Mini Cooper 20072014, BMW, Audi, BMW, Citroën, Chrysler, Ferrari, Fiat, Ford, GM, Hyundai, Land Rover, Lamborghini, Mercedes- Benz, Opel, Peugeot, Porsche, Renault, Rover, Saab, Seat, Skoda, Vauxhall, Volvo, VW, Fiat, Land Rover

7PC Super Duty Alloy wheel Sockets in EVA foam

T200300-7PC

Nylon Sleeve protects alloy wheels from damage Sizes: 17, 19, 21, 22mm & 17mm Mercedes, 21mm Hyundai, 27mm Land Rover

M12 Tyre Inflator Naked

MWM12BI-0

▪ Compact design for fast inflation of car, light truck and compact equipment tires. Anti-vibration stand with all rubber feet for no movement while inflating. Inflates to users pre-selected pressure for highly accurate inflation. Illuminated LCD display with a digital pressure, fuel gauge and battery level. Nozzle & hose storage, easily stores 66 cm hose and attachments, with an all-brass schrader chuck. Supplied with a ball inflation needle, presta chuck, inflator nozzle and schrader chuck.

£99.75

Tyre Plugger Deluxe Kit tubeless

SGI1085

• Flats Happen! Most vehicles run on tubeless tyres these days, but regardless of thickness or presealant additives, they are all vulnerable to being punctured. With Stop & Go tyre repair kits, tyres can now easily be plugged on—or off— the wheel

• This version comes in a new, durable impact-resistant carrying case with moulded foam interior, handle and lock hole to keep it secure from any loss of components.

• The Gun is a spring-loaded device that ‘drives’ the tyre plug into the hole. The shaft of the tyre plugs expand under pressure to fill the puncture. The mushroom head of the tyre plug sits on the inner wall allowing no air to escape. This insures maximum reliability from its revolutionary design

• Case measures 9” x 8.5” x 3”, weighs 2lb 3oz and is easily stored

• Includes a sturdy T-Handle Reamer

£63.85

4PC Wheel Internal Thread Kit

T431410

▪ For use on vehicles that use wheel bolts.

▪ M12×1.25: PSA, M12×1.5: Mercedes Benz and BMW, M12×1.7: Volvo, M14×1.5: VAG models

£22.50

25PC Mushroom

Plugs 5/16 x 3/4”

SGI2075

£9.20

£80.95

Tyre Inflator with Twin Hold Connection

PCLAFG4H03

▪ Linear gauge display

▪ Cast aluminium body

▪ Guaranteed accuracy - Calibration 0-138 psi / 0-9.6 bar

▪ High volume workshop use

▪ Hose Length: 0.53 m

▪ New Viewing Window - Larger window gives 20% greater field of viewing

▪ Lighter Weight - Gauge body weighs 923g

▪ Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped

▪ New Valve Mechanism - Simplified 2 stage mechanism design prevents user having to “push” against full line pressure on deflate preventing fatigue

▪ New Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy

▪ Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy

Digital Tyre Depth Gauge

PCLDTDG1D04

• Made from extra strong carbon fibre composite

• Large LCD display

• Zero setting in any position

• Metric, decimal inch and fraction inch (1/64”) toggle

• 1 battery: SR44 1.5v (supplied)

£11.95

SH3 Solidline LED Headlamp

LED502204

▪ Gesture Control Technology – a simple wave of the hand in front of the sensor activates or deactivates the light as if by magic!

▪ Four brightness levels – Boost (300lm), Power (180lm), Mid Power (100lm) and Low Power (20lm)

▪ Head movement angle 60°

▪ Patented Advanced Focusing Optics for flood or spot illumination

▪ Water and dust resistant to IP54 rating

▪ Supplied with x3 AAA alkaline batteries

£32.60

Mechanics Seat with Lower Tool Tray

KTI74981

▪ Padded seat 178 x 355mm

▪ 3 compartment storage tray

▪ Epoxy-coated metal frame

£64.40

TT Rechargeable Worklight

700 LUMENS

TT4010GB/ TT4010RB/ TT4010BB

• Durable housing, hook and lens

• Super strong magnetic base

• Flexible 180° folding design

• 3 LED battery level indicator

• Up to 7 hours usage time on low mode

£40.40

ToolTruck XL Mechanics Mat

TTMECHMATXL

▪ 980 x 380 x 30mm

▪ Made from highly durable foam

▪ Fuel and oil resistant

▪ Protects the user against cold and damp conditions

£33.95

TT Rechargeable Foldable Slim Light Green

Black 700 LUMENS

TT7001GB

• Features main and top spotlight

• Strong magnet on the bottom

• 90 degree hiding hook

• 180 degree rotating head in vertical and horizontal for desired angle

• 66 x 46 x 397mm (220mm when folded)

£38.95

£41.20

36pc 1/4" Metric socket set

ST09001SJ

▪ Ratchet with quick release design allows rapid socket removal

▪ Ratchet flush mounted reversing lever allows user to change direction with one hand without removing the wrench

▪ Sockets with single hex (6pt) fastener end design

▪ Socket off-corner loading design reduces fastener rounding

▪ Standard and deep socket options to reach more fasteners

▪ Universal joint for better access to hard-to reach fasteners

▪ Wobble Extension for better reach to more fasteners

▪ Sliding T-handle provides more leverage to break free stubborn fasteners

▪ Includes: 3.5mm-14mm standard sockets, 8mm-13mm deep sockets & extensions, UJ, T-handle, Nut Spinner

13pc 1/4" 3/8" Bolt Biter set

ST09137

▪ Ratchet with quick release design allows rapid socket removal

▪ Ratchet flush mounted reversing lever allows user to change direction with one hand without removing the wrench

▪ Removes rusted and rounded fasteners

▪ Innovative tapered flutes for easyseating onto a damaged fastener

▪ Bi-directional design removes or tightens damaged fasteners

▪ Dual sized sockets work with both SAE and metric fasteners

▪ Hexagonal base for use with impact guns, ratchets, wrenches,

3pc 1/4" 3/8" 1/2" drive 120xp Ratchet set

ST13975

▪ Designed with 120 positions providing a 3° swing arc so you can turn fasteners in tighter confines

▪ Designed with two double stacked 60-tooth pawls for exceptional strength

▪ Enclosed ratchet head design resists dirt infiltration for continuous and efficient execution

▪ Teardrop, low-profile head and flush-mounted on/off switch allow better access in tight spaces

▪ Flush mounted reversing lever allows user to change direction with one hand without removing the wrench

12pc Reversible metric ratchet spanner set

ST08044

▪ Ratcheting Wrenches feature open end & ratcheting box end

▪ Ratcheting box end needs as little as 5° to remove fasteners

▪ Sleek head design enables access to tight spots where a ratchet will not fit

▪ Off-corner loading design on ratcheting box ends provide better grip and reduces fastener rounding

▪ Flush mounted reversing lever allows user to change direction without removing the wrench

▪ Includes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

REECE LYCETT MINI CUP COMPETITION

ULTRA HEAVY DUTY

12V: TTBOOST3100

£363.85

INBUILT SAFETY FUSE Braided connection protected by a safety fuse

brass clamps

REVERSE POLARITY ALARM

This audible and visual alert informs professionals of incorrect terminal connections

Transmission Jack 500kg

TT500STJ

▪ 1110mm to 1900mm lifting height range

• High-speed lift to gearbox

• Foot pedal operation keeps hands-free

• Heavy-duty base with swivel castors for easy movement

£199.95

Cable Length 1.5m

Dimensions 25x25x50cm

DIGITAL VOLTMETER

This display allows professionals to quickly see the voltage available and to test the alternator of a vehicle

YOUR DEALER

AUTOMECHANIKA 2023 stand r70

Automechanika Birmingham, 6-8 June is the leading trade exhibition for the UK automotive aftermarket and supply chain. With 500 leading suppliers from 23 countries and 12,000 visitors from the UK & Ireland, it is set to be the biggest UK automotive networking reunion - ever.

Visitors can expect to get their hands on new products, fully test tools and technology in our 12 interactive features areas, 4 Workshop Training Hubs where visitors can choose from 192 hours of skills training for collision repair, digitalisation, EV & Hybrid, ADAS and more.

scan for free tickets