WIDIA™ Slim Line Issue 3
Distributed by:
A-13-03523EN_me_WIDIA_SlimLine_Covers_SinglePages.indd 2
2/11/15 11:32 AM
A-13-03523EN_me_WIDIA_SlimLine_Covers_SinglePages.indd 3
2/11/15 11:32 AM
WIDIA™ Slim Line High-Performance Solid Carbide End Mills VariMill.................................................................................................................................................................................... 2–3, 8 Roughing........................................................................................................................................................................................7 Finishing................................................................................................................................................................................... 9–10 Aluminium....................................................................................................................................................................................12 General Purpose+ Solid Carbide End Mills • Roughing/Finishing........................................................................................... 4–6, 11 General Purpose HSS-E End Mills • Roughing/Finishing.................................................................................................................13 VariDrill............................................................................................................................................................................................ 14–34 3 x D........................................................................................................................................................................................ 16–21 5 x D........................................................................................................................................................................................ 22–27 8 x D........................................................................................................................................................................................ 28–33 Speed and Feed Charts..............................................................................................................................................................34 Informational Icon Guide.....................................................................................................................................................................35
1
A-13-03523EN_me_WIDIA_SlimLine_Catalog_1-05.indd 1
2/11/15 11:25 AM
High-Performance Solid Carbide End Mills • VariMill™ List 4777 • VariMill • Unequal flute spacing. • Center cutting.
P TiAlN
1
2
3
v
v
v
P - Steels M - Stainless Steels
D1 D 4,0 6 5,0 6 6,0 6 8,0 8 10,0 10 12,0 12 16,0 16 20,0 20
length of cut Ap1 max 12,00 13,00 13,00 16,00 22,00 26,00 32,00 38,00
length L 55 57 57 63 72 83 92 104
4
5
6
1
M 2 3
1
v
v
v
v
v
v
v
K - Cast Iron N - Non-Ferrous
BCH 0,40 0,40 0,40 0,40 0,50 0,50 0,50 0,50
K 2 3
1
2
3
4
H 1
v
v
v
v
v
v
v
S
S - High-Temp Alloys H - Hard Materials
TiAIN - LT £ 477704002LT 16.87 477705002LT 17.49 477706002LT 18.24 477708003LT 26.84 477710004LT 35.82 477712005LT 48.43 477716006LT 78.54 477720007LT 114.50
List 4777 • VariMill
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D
B
TiAlN
ap 1xD 1xD 1xD 0,75 x D 1xD 0,75 x D 1xD 1xD 1xD 1xD 1xD 1xD 0,3 x D 0,3 x D 1xD 1xD 0,75 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 60 100 50 75 90 115 60 80 60 70 120 150 110 130 100 130 50 90 25 40 60 80 50 60 80 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,028 0,028 0,023 0,021 0,019 0,016 0,023 0,019 0,016 0,028 0,023 0,019 0,023 0,013 0,019 0,016 0,021
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
2
A-13-03523EN_me_WIDIA_SlimLine_Catalog_1-05.indd 2
WWW.WIDIA.COM
2/11/15 11:25 AM
High-Performance Solid Carbide End Mills • VariMill™ List 4778 • VariMill • Unequal flute spacing. • Center cutting.
P AlTiN
5
6
2
S 3 4
v
v
v
v
P - Steels M - Stainless Steels
D1 D 4,0 6 5,0 6 6,0 6 8,0 8 10,0 10 12,0 12 16,0 16 20,0 20
length of cut Ap1 max 12,00 13,00 13,00 16,00 22,00 26,00 32,00 38,00
length L 55 57 57 63 72 83 92 104
v
K - Cast Iron N - Non-Ferrous
Re 0,20 0,20 0,20 0,20 0,30 0,30 0,30 0,30
S - High-Temp Alloys H - Hard Materials
AlTiN - MT £ 477804002MT 16.87 477805002MT 17.49 477806002MT 18.24 477808003MT 26.84 477810004MT 35.82 477812005MT 48.43 477816006MT 78.54 477820007MT 114.50
List 4778 • VariMill
A
Group P5 P6 S2 S3 S4
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,5 x D
B
AlTiN
ap 1xD 0,75 x D 0,3 x D 1xD 1xD
Cutting Speed Vc m/min Min Max 60 100 50 75 25 40 60 80 50 60
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz
4,0 0,019 0,016 0,013 0,019 0,016
6,0 0,029 0,025 0,019 0,029 0,026
8,0 0,040 0,034 0,026 0,040 0,037
10,0 0,048 0,040 0,032 0,048 0,045
12,0 0,056 0,047 0,037 0,056 0,052
16,0 0,070 0,057 0,046 0,070 0,064
20,0 0,081 0,065 0,054 0,081 0,074
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_1-05.indd 3
3
2/11/15 11:25 AM
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 4002 • Center cutting.
P TiAlN
1
2
3
4
1
2
1
2
N 5
v
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D1 D 3,0 3 4,0 4 5,0 6 6,0 6 8,0 8 10,0 10 12,0 12 16,0 16 20,0 20
length of cut Ap1 max 9,50 12,00 14,00 16,00 20,00 22,00 25,00 32,00 38,00
length L 38 50 50 50 63 76 76 89 104
M
K
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
TiAlN - RT £ 400203000RT 9.10 400204001RT 10.18 400205002RT 13.47 400206002RT 13.47 400208003RT 16.89 400210004RT 22.77 400212005RT 27.42 400216006RT 53.94 400220007RT 78.08
List 4002
A
B
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%.
TiAlN Cutting Speed Vc m/min
Group P1 P2 P3 P4 M1 M2 K1 K2 N5
ap 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D 1,25 x D
ae 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D
ap 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D
Min 150 140 120 90 90 60 120 110 250
-
D1 - Diameter Max 200 190 160 150 115 80 150 130 750
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,028 0,028 0,023 0,021 0,023 0,019 0,028 0,023 0,036
6,0 0,044 0,044 0,036 0,033 0,036 0,029 0,044 0,036 0,054
8,0 0,060 0,060 0,050 0,045 0,050 0,040 0,060 0,050 0,072
10,0 0,072 0,072 0,061 0,054 0,061 0,048 0,072 0,061 0,090
12,0 0,083 0,083 0,070 0,062 0,070 0,056 0,083 0,070 0,108
16,0 0,101 0,101 0,087 0,077 0,087 0,070 0,101 0,087 0,144
20,0 0,114 0,114 0,101 0,088 0,101 0,081 0,114 0,101 0,180
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
4
A-13-03523EN_me_WIDIA_SlimLine_Catalog_1-05.indd 4
WWW.WIDIA.COM
2/11/15 11:25 AM
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 4003 • Center cutting.
P TiAlN
1
2
3
4
1
2
1
N 2 5
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D1 D 3,0 3 4,0 4 5,0 6 6,0 6 8,0 8 10,0 10 12,0 12 16,0 16 20,0 20
length of cut Ap1 max 9,50 12,00 14,00 16,00 20,00 22,00 25,00 32,00 38,00
M
K
v
K - Cast Iron N - Non-Ferrous
length L 38 50 50 50 63 76 76 89 104
S - High-Temp Alloys H - Hard Materials
TiAlN - RT £ 400303000RT 9.10 400304001RT 10.18 400305002RT 13.47 400306002RT 13.47 400308003RT 16.89 400310004RT 22.77 400312005RT 27.42 400316006RT 53.94 400320007RT 78.08
List 4003
A
B
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%.
TiAlN Cutting Speed Vc m/min
Group P1 P2 P3 P4 M1 M2 K1 K2 N5
ap 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D 0,75 x D
ae 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D
ap 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D 0,25 x D
Min 150 140 120 90 90 60 120 110 250
-
D1 - Diameter Max 200 190 160 150 115 80 150 130 750
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,033 0,033 0,027 0,025 0,027 0,022 0,033 0,027 0,041
6,0 0,050 0,050 0,042 0,038 0,042 0,034 0,050 0,042 0,062
8,0 0,069 0,069 0,058 0,052 0,058 0,046 0,069 0,058 0,083
10,0 0,083 0,083 0,070 0,062 0,070 0,056 0,083 0,070 0,104
12,0 0,095 0,095 0,081 0,072 0,081 0,065 0,095 0,081 0,124
16,0 0,116 0,116 0,100 0,088 0,100 0,080 0,116 0,100 0,166
20,0 0,131 0,131 0,116 0,101 0,116 0,093 0,131 0,116 0,207
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_1-05.indd 5
5
2/11/15 11:25 AM
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 4004 • Center cutting.
P TiAlN
M
2
3
4
1
2
1
2
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D1 D 3,0 3 4,0 4 5,0 5 6,0 6 8,0 8 10,0 10 12,0 12 16,0 16 20,0 20
length of cut Ap1 max 9,50 12,00 14,00 16,00 20,00 22,00 25,00 32,00 38,00
K
1
K - Cast Iron N - Non-Ferrous
length L 38 50 50 50 63 76 76 89 104
S - High-Temp Alloys H - Hard Materials
TiAlN - RT £ 400403000RT 9.10 400404001RT 10.18 400405002RT 13.47 400406002RT 13.47 400408003RT 16.89 400410004RT 22.77 400412005RT 27.42 400416006RT 53.94 400420007RT 78.08
List 4004
A
Group P1 P2 P3 P4 M1 M2 K1 K2
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D 0,1 x D
B
TiAlN
ap 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 90 115 60 80 120 150 110 130
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz
3,0 0,024 0,024 0,020 0,018 0,020 0,016 0,024 0,020
4,0 0,033 0,033 0,027 0,025 0,027 0,022 0,033 0,027
6,0 0,050 0,050 0,042 0,038 0,042 0,034 0,050 0,042
8,0 0,069 0,069 0,058 0,052 0,058 0,046 0,069 0,058
10,0 0,083 0,083 0,070 0,062 0,070 0,056 0,083 0,070
12,0 0,095 0,095 0,081 0,072 0,081 0,065 0,095 0,081
16,0 0,116 0,116 0,100 0,088 0,100 0,080 0,116 0,100
20,0 0,131 0,131 0,116 0,101 0,116 0,093 0,131 0,116
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
6
A-13-03523EN_me_WIDIA_SlimLine_Catalog_6-11.indd 6
WWW.WIDIA.COM
2/11/15 11:26 AM
High-Performance Solid Carbide End Mills • Roughing List 4976 • Center cutting. • Flat shallow pitch.
P AlTiN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
1
2
3
4
H 1
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D1 D 4,0 6 5,0 6 6,0 6 8,0 8 10,0 10 12,0 12 16,0 16 20,0 20
length of cut Ap1 max 8,00 13,00 13,00 16,00 22,00 26,00 32,00 38,00
length L 57 57 57 63 72 83 92 104
BCH 0,25 0,25 0,25 0,25 0,25 0,35 0,35 0,35
v
K - Cast Iron N - Non-Ferrous
ZU 3 3 3 3 4 4 4 4
v
S
S - High-Temp Alloys H - Hard Materials
AlTiN - MT £ 497604002MT 38.87 497605002MT 38.87 497606002MT 38.87 497608003MT 43.73 497610004MT 55.19 497612005MT 64.20 497616006MT 105.85 497620007MT 157.91
List 4976
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,4 x D 0,4 x D 0,4 x D 0,3 x D 0,4 x D 0,3 x D 0,4 x D 0,4 x D 0,4 x D 0,4 x D 0,4 x D 0,4 x D 0,3 x D 0,3 x D 0,4 x D 0,3 x D 0,3 x D
B
AlTiN
ap 1xD 1xD 0,75 x D 0,3 x D 0,75 x D 0,3 x D 0,75 x D 0,75 x D 0,75 x D 1xD 1xD 1xD 0,75 x D 0,3 x D 0,75 x D 0,75 x D 0,3 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 60 100 50 75 80 100 60 80 60 80 120 160 110 140 100 130 90 115 20 40 50 80 45 65 100 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,028 0,028 0,023 0,021 0,019 0,016 0,023 0,019 0,016 0,028 0,023 0,019 0,023 0,013 0,019 0,016 0,021
5,0 0,036 0,036 0,030 0,027 0,024 0,020 0,030 0,024 0,020 0,036 0,030 0,024 0,030 0,016 0,024 0,021 0,027
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_6-11.indd 7
7
2/11/15 11:26 AM
High-Performance Solid Carbide End Mills • VariMill™ List 47N0 • VariMill • Unequal flute spacing. • Center cutting.
P TiAlN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
v
v
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D 6 6
length of cut Ap1 max 9,00 10,00
L3 15,00 15,00
8,0 10,0
8 10
12,00 14,00
20,00 25,00
12,0 16,0
12 16
16,00 22,00
30,00 38,00
20,0
20
26,00
50,00
D1 5,0 6,0
length L 57 57
v
K - Cast Iron N - Non-Ferrous
v
1
2
S 3
4
H 1
v
v
v
v
v
S - High-Temp Alloys H - Hard Materials
D3 4,70 5,64
TiAlN - LT 47N005002LT 47N006002LT
£ 18.75 19.67
7,52 9,40
47N008003LT 47N010004LT
29.70 40.67
83 92
11,28 15,04
47N012005LT 47N016006LT
51.87 85.47
104
18,80
47N020007LT
129.41
63 72
List 47N0 • VariMill
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D
B
TiAlN
ap 1xD 1xD 1xD 0,75 x D 1xD 0,75 x D 1xD 1xD 1xD 1xD 1xD 1xD 0,3 x D 0,3 x D 1xD 1xD 0,75 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 120 160 90 150 60 100 50 75 90 115 60 80 60 70 120 150 110 130 100 130 50 90 25 40 60 80 50 60 80 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
5,0 0,036 0,036 0,030 0,027 0,024 0,020 0,030 0,024 0,020 0,036 0,030 0,024 0,030 0,016 0,024 0,021 0,027
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
8
A-13-03523EN_me_WIDIA_SlimLine_Catalog_6-11.indd 8
WWW.WIDIA.COM
2/11/15 11:26 AM
High-Performance Solid Carbide End Mills • Finishing List 4503 RJ • JIS • Center cutting.
P TiAlN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
1
2
3
4
H 1
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D 4 4 6
length of cut Ap1 max 3,00 3,00 8,00
6 6
12,00 14,00
6 8
16,00 20,00
10,0 12,0
10 12
22,00 25,00
16,0 20,0
16 20
32,00 38,00
D1 1,0 2,0 3,0
4,0 5,0
6,0 8,0
v
K - Cast Iron N - Non-Ferrous
v
S
S - High-Temp Alloys H - Hard Materials
length L 50 50 50
TiAlN - RJ 450301001RJ 450302001RJ 450303002RJ
£ 10.94 11.31 12.09
50 50
450304002RJ 450305002RJ
11.94 12.04
50 63
450306002RJ 450308003RJ
11.37 16.17
76 76
450310004RJ 450312005RJ
28.15 43.34
89 104
450316006RJ 450320007RJ
67.52 112.68
Lists 4503 RJ • JIS
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D 0,3 x D
B
TiAlN
ap 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D
Cutting Speed Vc m/min Min Max 150 200 140 190 160 180 140 160 60 100 50 80 80 100 60 80 60 80 120 160 110 140 100 130 90 115 20 40 50 80 45 65 100 140
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
1,0 0,007 0,007 0,006 0,005 0,005 0,004 0,006 0,005 0,004 0,007 0,006 0,005 0,006 0,003 0,005 0,004 0,005
2,0 0,014 0,014 0,011 0,010 0,009 0,008 0,011 0,009 0,008 0,014 0,011 0,009 0,011 0,006 0,009 0,007 0,010
4,0 0,028 0,028 0,023 0,021 0,019 0,016 0,023 0,019 0,016 0,028 0,023 0,019 0,023 0,013 0,019 0,016 0,021
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_6-11.indd 9
9
2/11/15 11:26 AM
High-Performance Solid Carbide End Mills • Finishing Lists D507 D517 • Center cutting.
P TiAlN
1
2
3
4
5
6
1
M 2 3
1
K 2 3
1
2
3
4
H 1
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D 6 6
length of cut Ap1 max 10,00 13,00
8 8
12,00 19,00
10,0 10,0
10 10
14,00 22,00
12,0 12,0
12 12
16,00 26,00
16,0 16,0
16 16
22,00 32,00
20,0 20,0
20 20
26,00 38,00
D1 6,0 6,0
8,0 8,0
v
K - Cast Iron N - Non-Ferrous
v
S
S - High-Temp Alloys H - Hard Materials
length L 54 57
TiAlN - RW D50706002RW D51706002RW
£ 14.57 16.89
58 63
D50708003RW D51708003RW
21.27 21.55
66 72
D50710004RW D51710004RW
27.64 35.33
73 83
D50712005RW D51712005RW
33.31 42.79
82 92
D50716006RW D51716006RW
62.41 81.33
92 104
D50720007RW D51720007RW
93.88 111.89
Lists D507 D517
A
Group P1 P2 P3 P4 P5 P6 M1 M2 M3 K1 K2 K3 S1 S2 S3 S4 H1
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
TiAlN Cutting Speed Vc m/min ae 0,05 x D 0,05 x D 0,05 x D 0,04 x D 0,05 x D 0,04 x D 0,05 x D 0,05 x D 0,05 x D 0,05 x D 0,05 x D 0,05 x D 0,04 x D 0,04 x D 0,05 x D 0,05 x D 0,04 x D
Min 150 140 120 90 60 50 80 60 60 120 110 100 50 20 50 45 80
-
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). D1 - Diameter Max 200 190 160 150 100 75 100 80 80 160 140 130 90 40 80 65 140
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
6,0 0,044 0,044 0,036 0,033 0,029 0,025 0,036 0,029 0,025 0,044 0,036 0,029 0,036 0,019 0,029 0,026 0,033
8,0 0,060 0,060 0,050 0,045 0,040 0,034 0,050 0,040 0,034 0,060 0,050 0,040 0,050 0,026 0,040 0,037 0,045
10,0 0,072 0,072 0,061 0,054 0,048 0,040 0,061 0,048 0,040 0,072 0,061 0,048 0,061 0,032 0,048 0,045 0,054
12,0 0,083 0,083 0,070 0,062 0,056 0,047 0,070 0,056 0,047 0,083 0,070 0,056 0,070 0,037 0,056 0,052 0,062
16,0 0,101 0,101 0,087 0,077 0,070 0,057 0,087 0,070 0,057 0,101 0,087 0,070 0,087 0,046 0,070 0,064 0,077
18,0 0,108 0,108 0,095 0,083 0,076 0,061 0,095 0,076 0,061 0,108 0,095 0,076 0,095 0,050 0,076 0,069 0,083
20,0 0,114 0,114 0,101 0,088 0,081 0,065 0,101 0,081 0,065 0,114 0,101 0,081 0,101 0,054 0,081 0,074 0,088
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
10
A-13-03523EN_me_WIDIA_SlimLine_Catalog_6-11.indd 10
WWW.WIDIA.COM
2/11/15 11:26 AM
General Purpose+ Solid Carbide End Mills • Roughing/Finishing List 423004 • NINA™ • Center cutting.
P AlTiN
1
2
3
4
1
2
1
K 2 3
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
M
v
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
K30F-DCHP
D 6 6
length of cut Ap1 max 7,00 8,00
length L 38 38
BCH 0,40 0,40
AlTiN - MT 423004-000040 423004-000060
£ 7.77 8.78
8,0 10,0
8 10
11,00 13,00
43 50
0,40 0,50
423004-000080 423004-000100
11.06 15.94
12,0
12
15,00
55
0,50
423004-000120
21.48
D1 4,0 6,0
List 423004 • NINA
K30F-DCHP A
Group P1 P2 P3 P4 M1 M2 K1 K2 K3
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D
B
AlTiN
ap 1xD 1xD 1xD 1xD 1xD 1xD 1xD 1xD 1xD
Cutting Speed Vc m/min Min Max 180 220 160 200 160 180 140 160 90 115 60 80 120 150 110 130 100 130
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz Fz Fz Fz Fz Fz Fz Fz
4,0 0,030 0,030 0,025 0,023 0,025 0,020 0,030 0,025 0,020
6,0 0,050 0,050 0,040 0,036 0,040 0,030 0,050 0,040 0,030
8,0 0,060 0,060 0,050 0,045 0,050 0,040 0,060 0,050 0,040
10,0 0,070 0,070 0,060 0,054 0,060 0,050 0,070 0,060 0,050
12,0 0,072 0,072 0,070 0,063 0,065 0,060 0,080 0,070 0,060
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_6-11.indd 11
11
2/11/15 11:26 AM
High-Performance Solid Carbide End Mills • Aluminium List 5102 • AluSurf™ • Center cutting.
N Uncoated
1
2
v
v
P - Steels M - Stainless Steels
D 3
length of cut Ap1 max 12,00
4 5 6
12,00 14,00 16,00
8,0 10,0
8 10
20,00 22,00
12,0 16,0 20,0
12 16 20
25,00 32,00 38,00
D1 3,0
4,0 5,0 6,0
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
length L 38
UNCOATED - .. 510203000..
£ 10.81
50 50 50
510204001.. 510205001.. 510206002..
12.00 13.91 13.95
63 76
510208003.. 510210004..
15.44 25.16
76 89 104
510212005.. 510216006.. 510220007..
32.93 59.49 107.66
List 5102 • AluSurf
A
Group N1 N2
ap 1,5 x D 1,5 x D
ae 0,5 x D 0,5 x D
B
Uncoated
ap 1xD 1xD
Cutting Speed Vc m/min Min Max 500 2000 500 1500
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%. D1 - Diameter mm Fz Fz
4,0 0,036 0,032
6,0 0,054 0,049
8,0 0,072 0,065
10,0 0,090 0,081
12,0 0,108 0,097
16,0 0,144 0,130
20,0 0,180 0,162
Multiply ap for milling machine spindle with ceramic bearings by 0,5. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
12
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 12
WWW.WIDIA.COM
2/11/15 11:28 AM
General Purpose HSS-E End Mills • Roughing/Finishing List 6606 • Center cutting. • Fine pitch.
P TiAlN
1
2
3
5
1
M 2 3
1
2
1
2
3
4
v
v
v
v
v
v
v
v
v
v
v
v
P - Steels M - Stainless Steels
D1 6,0 8,0
D 6 10
length of cut Ap1 max 13,00 19,00
10,0 12,0 16,0
10 12 16
22,00 26,00 32,00
20,0
20
38,00
104
25,0
25
45,00
121
v
K
S
K - Cast Iron N - Non-Ferrous
S - High-Temp Alloys H - Hard Materials
length L 57 69
BCH 0,25 0,25
ZU 3 3
TiAlN - LW 660606002LW 660608004LW
£ 17.20 20.62
72 83 92
0,25 0,35 0,35
4 4 4
660610004LW 660612005LW 660616006LW
19.97 25.22 32.49
0,35
4
660620007LW
43.68
0,50
5
660625008LW
66.96
List 6606
A
Group P1 P2 P3 P5 M1 M2 M3 K1 K2 S1 S2 S3 S4
ap 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D 1,5 x D
B
ae 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,5 x D 0,3 x D 0,5 x D 0,3 x D
ap 1xD 1xD 1xD 0,5 x D 1xD 1xD 1xD 1xD 1xD 1xD 0,5 x D 1xD 0,5 x D
Recommended Feed per Tooth (Fz=mm/th) for Side Milling (A). For Slotting (B), reduce Fz by 20%.
TiAlN Cutting Speed Vc m/min Min 70 60 50 25 25 25 15 70 50 15 5 15 10 -
D1 - Diameter Max 80 80 70 35 35 30 20 80 70 30 15 30 30
mm Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz Fz
6,0 0,040 0,040 0,034 0,027 0,034 0,027 0,023 0,040 0,034 0,034 0,018 0,027 0,024
8,0 0,055 0,055 0,046 0,036 0,046 0,036 0,031 0,055 0,046 0,046 0,024 0,036 0,033
10,0 0,063 0,063 0,053 0,042 0,053 0,042 0,035 0,063 0,053 0,053 0,028 0,042 0,039
12,0 0,070 0,070 0,059 0,047 0,059 0,047 0,039 0,070 0,059 0,059 0,031 0,047 0,043
16,0 0,078 0,078 0,066 0,053 0,066 0,053 0,044 0,078 0,066 0,066 0,035 0,053 0,049
20,0 0,085 0,085 0,073 0,059 0,073 0,059 0,048 0,085 0,073 0,073 0,039 0,059 0,054
25,0 0,104 0,104 0,096 0,076 0,096 0,076 0,060 0,104 0,096 0,096 0,051 0,076 0,070
Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on diameters greater than 12mm.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 13
13
2/11/15 11:28 AM
Multiple-Material Drilling • WIDIA VariDrill ™
™
The new VariDrill advanced point geometry design offers the ultimate solution for multipurpose drilling operations. It offers dependable tool life in all materials due to less chipping on the cutting edge.
™
VariDrill
• Reduced chipping on cutting edge means longer tool life. • New geometry design offers strength and versatility. • Delivers proper surface finish across multiple materials: steel, stainless steel, cast iron, aluminium, and high-temp alloys.
New WIDIA WU25PD™ drilling grade Extremely high wear resistance and longer tool life.
VariDrill core design Free chip flow and chip evacuation.
VariDrill point design Long tool life in all materials, less chipping on cutting edge.
14
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 14
Marginless design
Precision shank
Distributes cutting forces evenly for less chipping on the cutting edge.
Low run out.
WWW.WIDIA.COM
2/11/15 11:28 AM
Page Head 1
Page head 2
Innovative Technology VariDrill™ is a technologically advanced holemaking solution. These high-performance solid carbide drills were designed in Germany to provide the transportation, aerospace, general engineering, and energy industries with a tool that performs on multiple materials.
Elegance, Strength, and Versatility WIDIA’s engineers developed an innovative new design to deliver drilling performance. These Solid Carbide drills have a distinctive geometry and marginless design. The VariDrill point is versatile enough to work through steel, stainless steel, cast iron, aluminium, and a range of high-temp alloys.
Optimum Hole Quality The unique marginless design reduces chipping on the tool’s edge and stabilises cutting forces. This unique tool geometry enables chips to roll smoothly and evacuate easily, resulting in noticeably less friction, heat, jamming, and scratching. By minimising these drilling issues, VariDrill delivers an optimum surface finish with every hole — no matter the material.
More Options and Longer Tool Life Aside from its uniquely engineered design, VariDrill also offers a broad portfolio of drilling options. With more than 2,200 items, VariDrill offers more choices than any other drill for general engineering operations. And because most drills can be reconditioned, your tools will gain extended life.
VariDrill — innovatively designed and technologically advanced. Make VariDrill your go-to drill for hole after hole...after hole.
NEW!
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 15
15
2/11/15 11:28 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
nVDS201A/VDS401A • 3 x D
VDS201A • WU25PD VDS201A01000 VDS201A01016
£ 21.49 21.86
VDS401A • WU25PD — —
£ — —
D1 diameter mm in 1,000 .0394 1,016 .0400
VDS201A01041 VDS201A01067
21.86 21.86
— —
— —
1,041 1,067
.0410 .0420
VDS201A01092 VDS201A01100
21.86 21.86
— —
— —
1,092 1,100
.0430 .0433
VDS201A01181 VDS201A01191
21.86 21.86
— —
— —
1,181 1,191
.0465 .0469
VDS201A01200 VDS201A01300
21.86 21.86
— —
— —
1,200 1,300
.0472 .0512
VDS201A01321 VDS201A01397
21.86 21.86
— —
— —
1,321 1,397
.0520 .0550
VDS201A01400 VDS201A01500
21.86 21.86
— VDS401A01500
— 29.55
1,400 1,500
.0551 .0591
VDS201A01600 VDS201A01700
21.86 21.86
VDS401A01600 VDS401A01700
29.55 29.55
1,600 1,700
.0630 .0669
VDS201A01800 VDS201A01900
21.86 21.86
VDS401A01800 VDS401A01900
29.55 29.55
1,800 1,900
.0709 .0748
VDS201A01984 VDS201A02000
21.86 21.86
VDS401A01984 VDS401A02000
29.55 29.55
1,984 2,000
VDS201A02100 VDS201A02200
22.31 22.31
VDS401A02100 VDS401A02200
30.04 30.04
VDS201A02300 VDS201A02383
22.31 22.31
VDS401A02300 VDS401A02383
VDS201A02400 VDS201A02439
22.31 22.31
VDS201A02489 VDS201A02500
L4 max 5 5
L5 0,1 0,1
L 58 58
LS 28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 5
0,2 0,2
58 58
28 28
5 6
0,2 0,2
58 58
28 28
6 6
0,2 0,3
58 58
28 28
6 6
0,3 0,3
58 58
28 28
.0781 .0787
10 10
0,3 0,3
58 58
28 28
2,100 2,200
.0827 .0866
10 10
0,3 0,3
58 58
28 28
30.04 30.04
2,300 2,383
.0906 .0938
10 12
0,4 0,4
58 58
28 28
VDS401A02400 VDS401A02439
30.04 30.04
2,400 2,439
.0945 .0960
12 12
0,4 0,4
58 58
28 28
22.31 22.31
VDS401A02489 VDS401A02500
30.04 30.04
2,489 2,500
.0980 .0984
12 12
0,4 0,4
58 58
28 28
VDS201A02578 VDS201A02600
22.31 22.31
VDS401A02578 VDS401A02600
30.04 30.04
2,578 2,600
.1015 .1024
12 12
0,4 0,4
58 58
28 28
VDS201A02642 VDS201A02700
22.31 22.31
VDS401A02642 VDS401A02700
30.04 30.04
2,642 2,700
.1040 .1063
12 12
0,4 0,4
58 58
28 28
VDS201A02705 VDS201A02779
22.31 22.31
VDS401A02705 VDS401A02779
30.04 30.04
2,705 2,779
.1065 .1094
12 12
0,4 0,4
58 58
28 28
VDS201A02800 VDS201A02820
22.31 22.31
VDS401A02800 VDS401A02820
30.04 30.04
2,800 2,820
.1102 .1110
12 12
0,5 0,5
58 58
28 28
VDS201A02870 VDS201A02900
22.31 22.31
VDS401A02870 VDS401A02900
30.04 30.04
2,870 2,900
.1130 .1142
12 12
0,5 0,5
58 58
28 28
VDS201A02947 VDS201A03000
22.31 22.31
VDS401A02947 VDS401A03000
30.04 30.04
2,947 3,000
.1160 .1181
12 14
0,5 0,5
58 62
28 36
D 4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 6
(continued)
16
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 16
WWW.WIDIA.COM
2/11/15 11:28 AM
Page Head 1 Solid Carbide Page Drills head 2
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A03048 VDS201A03100
£ 22.69 22.69
VDS401A • WU25PD VDS401A03048 VDS401A03100
£ 30.56 30.56
D1 diameter mm in 3,048 .1200 3,100 .1220
VDS201A03175 VDS201A03200
22.69 22.69
VDS401A03175 VDS401A03200
30.56 30.56
3,175 3,200
VDS201A03264 VDS201A03300
22.69 22.69
VDS401A03264 VDS401A03300
30.56 30.56
VDS201A03400 VDS201A03455
22.69 22.69
VDS401A03400 VDS401A03455
VDS201A03500 VDS201A03571
22.69 22.69
VDS201A03600 VDS201A03658
L4 max 14 14
L5 0,5 0,5
L 62 62
LS 36 36
.1250 .1260
14 14
0,5 0,5
62 62
36 36
3,264 3,300
.1285 .1299
14 14
0,5 0,5
62 62
36 36
30.56 30.56
3,400 3,455
.1339 .1360
14 14
0,6 0,6
62 62
36 36
VDS401A03500 VDS401A03571
30.56 30.56
3,500 3,571
.1378 .1406
14 14
0,6 0,6
62 62
36 36
22.69 22.69
VDS401A03600 VDS401A03658
30.56 30.56
3,600 3,658
.1417 .1440
14 14
0,6 0,6
62 62
36 36
VDS201A03700 VDS201A03734
22.69 22.69
VDS401A03700 VDS401A03734
30.56 30.56
3,700 3,734
.1457 .1470
14 14
0,6 0,6
62 62
36 36
VDS201A03800 VDS201A03900
22.69 22.69
VDS401A03800 VDS401A03900
30.56 30.56
3,800 3,900
.1496 .1535
17 17
0,6 0,6
66 66
36 36
VDS201A03970 VDS201A04000
22.69 22.69
VDS401A03970 VDS401A04000
30.56 30.56
3,970 4,000
.1563 .1575
17 17
0,7 0,7
66 66
36 36
VDS201A04039 VDS201A04090
23.06 23.06
VDS401A04039 VDS401A04090
31.69 31.69
4,039 4,090
.1590 .1610
17 17
0,7 0,7
66 66
36 36
VDS201A04100 VDS201A04200
23.06 23.06
VDS401A04100 VDS401A04200
31.69 31.69
4,100 4,200
.1614 .1654
17 17
0,7 0,7
66 66
36 36
VDS201A04217 VDS201A04300
23.06 23.06
VDS401A04217 VDS401A04300
31.69 31.69
4,217 4,300
.1660 .1693
17 17
0,7 0,7
66 66
36 36
VDS201A04366 VDS201A04400
23.06 23.06
VDS401A04366 VDS401A04400
31.69 31.69
4,366 4,400
.1719 .1732
17 17
0,7 0,7
66 66
36 36
VDS201A04500 VDS201A04600
23.06 23.06
VDS401A04500 VDS401A04600
31.69 31.69
4,500 4,600
.1772 .1811
17 17
0,7 0,8
66 66
36 36
VDS201A04623 VDS201A04700
23.06 23.06
VDS401A04623 VDS401A04700
31.69 31.69
4,623 4,700
.1820 .1850
17 17
0,8 0,8
66 66
36 36
VDS201A04763 VDS201A04800
23.06 23.06
VDS401A04763 VDS401A04800
31.69 31.69
4,763 4,800
.1875 .1890
20 20
0,8 0,8
66 66
36 36
VDS201A04852 VDS201A04900
23.06 23.06
VDS401A04852 VDS401A04900
31.69 31.69
4,852 4,900
.1910 .1929
20 20
0,8 0,8
66 66
36 36
VDS201A05000 VDS201A05100
23.06 23.06
VDS401A05000 VDS401A05100
31.69 32.29
5,000 5,100
.1969 .2008
20 20
0,8 0,8
66 66
36 36
VDS201A05106 VDS201A05159
23.06 23.06
VDS401A05106 VDS401A05159
32.29 32.29
5,106 5,159
.2010 .2031
20 20
0,8 0,9
66 66
36 36
VDS201A05200 VDS201A05300
23.06 23.06
VDS401A05200 VDS401A05300
32.29 32.29
5,200 5,300
.2047 .2087
20 20
0,9 0,9
66 66
36 36
VDS201A05400 VDS201A05410
23.06 23.06
VDS401A05400 VDS401A05410
32.29 32.29
5,400 5,410
.2126 .2130
20 20
0,9 0,9
66 66
36 36
VDS201A05500 VDS201A05558
23.06 23.06
VDS401A05500 VDS401A05558
32.29 32.29
5,500 5,558
.2165 .2188
20 20
0,9 0,9
66 66
36 36
D 6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
(continued)
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 17
17
2/11/15 11:28 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A05600 VDS201A05616
£ 23.06 23.06
VDS401A • WU25PD VDS401A05600 VDS401A05616
£ 32.29 32.29
D1 diameter mm in 5,600 .2205 5,616 .2211
VDS201A05700 VDS201A05800
23.06 23.06
VDS401A05700 VDS401A05800
32.29 32.29
5,700 5,800
VDS201A05900 VDS201A05954
23.06 23.06
VDS401A05900 VDS401A05954
32.29 32.29
VDS201A06000 VDS201A06100
23.06 23.48
VDS401A06000 VDS401A06100
VDS201A06200 VDS201A06300
23.48 23.48
VDS201A06350 VDS201A06400
L4 max 20 20
L5 0,9 0,9
L 66 66
LS 36 36
D 6 6
.2244 .2283
20 20
1,0 1,0
66 66
36 36
5,900 5,954
.2323 .2344
20 20
1,0 1,0
66 66
36 36
32.29 35.18
6,000 6,100
.2362 .2402
20 24
1,0 1,0
66 79
36 36
VDS401A06200 VDS401A06300
35.18 35.18
6,200 6,300
.2441 .2480
24 24
1,0 1,1
79 79
36 36
23.48 23.48
VDS401A06350 VDS401A06400
35.18 35.18
6,350 6,400
.2500 .2520
24 24
1,1 1,1
79 79
36 36
VDS201A06500 VDS201A06528
23.48 23.48
VDS401A06500 VDS401A06528
35.18 35.18
6,500 6,528
.2559 .2570
24 24
1,1 1,1
79 79
36 36
VDS201A06600 VDS201A06630
23.48 23.48
VDS401A06600 VDS401A06630
35.18 35.18
6,600 6,630
.2598 .2610
24 24
1,1 1,1
79 79
36 36
VDS201A06700 VDS201A06746
23.48 23.48
VDS401A06700 VDS401A06746
35.18 35.18
6,700 6,746
.2638 .2656
24 24
1,1 1,1
79 79
36 36
VDS201A06800 VDS201A06900
23.48 23.48
VDS401A06800 VDS401A06900
35.18 35.18
6,800 6,900
.2677 .2717
24 24
1,1 1,2
79 79
36 36
VDS201A07000 VDS201A07100
23.48 24.26
VDS401A07000 VDS401A07100
35.18 37.65
7,000 7,100
.2756 .2795
24 29
1,2 1,2
79 79
36 36
VDS201A07145 VDS201A07200
24.26 24.26
VDS401A07145 VDS401A07200
37.65 37.65
7,145 7,200
.2813 .2835
29 29
1,2 1,2
79 79
36 36
VDS201A07300 VDS201A07400
24.26 24.26
VDS401A07300 VDS401A07400
37.65 37.65
7,300 7,400
.2874 .2913
29 29
1,2 1,3
79 79
36 36
VDS201A07500 VDS201A07541
24.26 24.26
VDS401A07500 VDS401A07541
37.65 37.65
7,500 7,541
.2953 .2969
29 29
1,3 1,3
79 79
36 36
VDS201A07600 VDS201A07700
24.26 24.26
VDS401A07600 VDS401A07700
37.65 37.65
7,600 7,700
.2992 .3031
29 29
1,3 1,3
79 79
36 36
VDS201A07800 VDS201A07900
24.26 24.26
VDS401A07800 VDS401A07900
37.65 37.65
7,800 7,900
.3071 .3110
29 29
1,3 1,3
79 79
36 36
VDS201A07938 VDS201A08000
24.26 24.26
VDS401A07938 VDS401A08000
37.65 37.65
7,938 8,000
.3125 .3150
29 29
1,3 1,4
79 79
36 36
VDS201A08100 VDS201A08200
26.55 26.55
VDS401A08100 VDS401A08200
41.33 41.33
8,100 8,200
.3189 .3228
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08300 VDS201A08334
26.55 26.55
VDS401A08300 VDS401A08334
41.33 41.33
8,300 8,334
.3268 .3281
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08400 VDS201A08433
26.55 26.55
VDS401A08400 VDS401A08433
41.33 41.33
8,400 8,433
.3307 .3320
35 35
1,4 1,4
89 89
40 40
10 10
VDS201A08500 VDS201A08600
26.55 26.55
VDS401A08500 VDS401A08600
41.33 41.33
8,500 8,600
.3346 .3386
35 35
1,4 1,5
89 89
40 40
10 10
VDS201A08700 VDS201A08733
26.55 26.55
VDS401A08700 VDS401A08733
41.33 41.33
8,700 8,733
.3425 .3438
35 35
1,5 1,5
89 89
40 40
10 10
VDS201A08800 VDS201A08900
26.55 26.55
VDS401A08800 VDS401A08900
41.33 41.33
8,800 8,900
.3465 .3504
35 35
1,5 1,5
89 89
40 40
10 10
6 6
6 6
6 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
(continued)
18
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 18
WWW.WIDIA.COM
2/11/15 11:28 AM
Page Head 1 Solid Carbide Page Drills head 2
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A09000 VDS201A09100
£ 26.55 27.34
VDS401A • WU25PD VDS401A09000 VDS401A09100
£ 41.33 45.23
VDS201A09129 VDS201A09200
27.34 27.34
VDS401A09129 VDS401A09200
45.23 45.23
VDS201A09300 VDS201A09347
27.34 27.34
VDS401A09300 VDS401A09347
45.23 45.23
VDS201A09400 VDS201A09500
27.34 27.34
VDS401A09400 VDS401A09500
45.23 45.23
VDS201A09525 VDS201A09600
27.34 27.34
VDS401A09525 VDS401A09600
45.23 45.23
VDS201A09700 VDS201A09800
27.34 27.34
VDS401A09700 VDS401A09800
45.23 45.23
VDS201A09900 VDS201A09921
27.34 27.34
VDS401A09900 VDS401A09921
45.23 45.23
VDS201A10000 VDS201A10100
27.34 35.18
VDS401A10000 VDS401A10100
VDS201A10200 VDS201A10300
35.18 35.18
VDS201A10320 VDS201A10400
D1 diameter mm in .3543 9,000 .3583 9,100
L4 max 35 35
L5 1,5 1,5
L 89 89
LS 40 40
D 10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
89 89
40 40
10 10
9,129 9,200
.3594 .3622
35 35
1,6 1,6
9,300 9,347
.3661 .3680
35 35
1,6 1,6
9,400 9,500
.3701 .3740
35 35
1,6 1,6
9,525 9,600
.3750 .3780
35 35
1,6 1,6
9,700 9,800
.3819 .3858
35 35
1,7 1,7
9,900 9,921
.3898 .3906
35 35
1,7 1,7
45.23 54.53
10,000 10,100
.3937 .3976
35 40
1,7 1,7
89 102
40 45
10 12
VDS401A10200 VDS401A10300
54.53 54.53
10,200 10,300
.4016 .4055
40 40
1,7 1,8
102 102
45 45
12 12
35.18 35.18
VDS401A10320 VDS401A10400
54.53 54.53
10,320 10,400
.4063 .4094
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10500 VDS201A10600
35.18 35.18
VDS401A10500 VDS401A10600
54.53 54.53
10,500 10,600
.4134 .4173
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10700 VDS201A10716
35.18 35.18
VDS401A10700 VDS401A10716
54.53 54.53
10,700 10,716
.4213 .4219
40 40
1,8 1,8
102 102
45 45
12 12
VDS201A10800 VDS201A10900
35.18 35.18
VDS401A10800 VDS401A10900
54.53 54.53
10,800 10,900
.4252 .4291
40 40
1,8 1,9
102 102
45 45
12 12
VDS201A11000 VDS201A11100
35.18 36.75
VDS401A11000 VDS401A11100
54.53 57.08
11,000 11,100
.4331 .4370
40 40
1,9 1,9
102 102
45 45
12 12
VDS201A11113 VDS201A11200
36.75 36.75
VDS401A11113 VDS401A11200
57.08 57.08
11,113 11,200
.4375 .4409
40 40
1,9 1,9
102 102
45 45
12 12
VDS201A11300 VDS201A11400
36.75 36.75
VDS401A11300 VDS401A11400
57.08 57.08
11,300 11,400
.4449 .4488
40 40
1,9 2,0
102 102
45 45
12 12
VDS201A11500 VDS201A11509
36.75 36.75
VDS401A11500 VDS401A11509
57.08 57.08
11,500 11,509
.4528 .4531
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11600 VDS201A11700
36.75 36.75
VDS401A11600 VDS401A11700
57.08 57.08
11,600 11,700
.4567 .4606
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11800 VDS201A11900
36.75 36.75
VDS401A11800 VDS401A11900
57.08 57.08
11,800 11,900
.4646 .4685
40 40
2,0 2,0
102 102
45 45
12 12
VDS201A11908 VDS201A12000
36.75 36.75
VDS401A11908 VDS401A12000
57.08 57.08
11,908 12,000
.4688 .4724
40 40
2,0 2,1
102 102
45 45
12 12
VDS201A12100 VDS201A12200
49.28 49.28
VDS401A12100 VDS401A12200
76.50 76.50
12,100 12,200
.4764 .4803
43 43
2,1 2,1
107 107
45 45
14 14
VDS201A12300 VDS201A12304
49.28 49.28
VDS401A12300 VDS401A12304
76.50 76.50
12,300 12,304
.4843 .4844
43 43
2,1 2,1
107 107
45 45
14 14
VDS201A12400 VDS201A12500
49.28 49.28
VDS401A12400 VDS401A12500
76.50 76.50
12,400 12,500
.4882 .4921
43 43
2,1 2,1
107 107
45 45
14 14
(continued)
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 19
19
2/11/15 11:28 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D (VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A12600 VDS201A12700
£ 49.28 49.28
VDS401A • WU25PD VDS401A12600 VDS401A12700
£ 76.50 76.50
D1 diameter mm in 12,600 .4961 12,700 .5000
VDS201A12800 VDS201A12900
49.28 49.28
VDS401A12800 VDS401A12900
76.50 76.50
12,800 12,900
VDS201A13000 VDS201A13096
49.28 50.85
VDS401A13000 VDS401A13096
76.50 78.75
VDS201A13100 VDS201A13200
50.85 50.85
VDS401A13100 VDS401A13200
VDS201A13300 VDS201A13400
50.85 50.85
VDS201A13500 VDS201A13600
L4 max 43 43
L5 2,2 2,2
L 107 107
LS 45 45
D 14 14
.5039 .5079
43 43
2,2 2,2
107 107
45 45
14 14
13,000 13,096
.5118 .5156
43 43
2,2 2,3
107 107
45 45
14 14
78.75 78.75
13,100 13,200
.5157 .5197
43 43
2,3 2,3
107 107
45 45
14 14
VDS401A13300 VDS401A13400
78.75 78.75
13,300 13,400
.5236 .5276
43 43
2,3 2,3
107 107
45 45
14 14
50.85 50.85
VDS401A13500 VDS401A13600
78.75 78.75
13,500 13,600
.5315 .5354
43 43
2,3 2,3
107 107
45 45
14 14
VDS201A13700 VDS201A13800
50.85 50.85
VDS401A13700 VDS401A13800
78.75 78.75
13,700 13,800
.5394 .5433
43 43
2,4 2,4
107 107
45 45
14 14
VDS201A13891 VDS201A13900
50.85 50.85
VDS401A13891 VDS401A13900
78.75 78.75
13,891 13,900
.5469 .5472
43 43
2,4 2,4
107 107
45 45
14 14
VDS201A14000 VDS201A14100
50.85 58.50
VDS401A14000 VDS401A14100
78.75 90.75
14,000 14,100
.5512 .5551
43 45
2,4 2,4
107 115
45 48
14 16
VDS201A14200 VDS201A14288
58.50 58.50
VDS401A14200 VDS401A14288
90.75 90.75
14,200 14,288
.5591 .5625
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14300 VDS201A14400
58.50 58.50
VDS401A14300 VDS401A14400
90.75 90.75
14,300 14,400
.5630 .5669
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14500 VDS201A14600
58.50 58.50
VDS401A14500 VDS401A14600
90.75 90.75
14,500 14,600
.5709 .5748
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14684 VDS201A14700
58.50 58.50
VDS401A14684 VDS401A14700
90.75 90.75
14,684 14,700
.5781 .5787
45 45
2,5 2,5
115 115
48 48
16 16
VDS201A14800 VDS201A14900
58.50 58.50
VDS401A14800 VDS401A14900
90.75 90.75
14,800 14,900
.5827 .5866
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15000 VDS201A15083
58.50 66.45
VDS401A15000 VDS401A15083
90.75 103.50
15,000 15,083
.5906 .5938
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15100 VDS201A15200
66.45 66.45
VDS401A15100 VDS401A15200
103.50 103.50
15,100 15,200
.5945 .5984
45 45
2,6 2,6
115 115
48 48
16 16
VDS201A15300 VDS201A15400
66.45 66.45
VDS401A15300 VDS401A15400
103.50 103.50
15,300 15,400
.6024 .6063
45 45
2,6 2,7
115 115
48 48
16 16
VDS201A15479 VDS201A15500
66.45 66.45
VDS401A15479 VDS401A15500
103.50 103.50
15,479 15,500
.6094 .6102
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15600 VDS201A15700
66.45 66.45
VDS401A15600 VDS401A15700
103.50 103.50
15,600 15,700
.6142 .6181
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15800 VDS201A15875
66.45 66.45
VDS401A15800 VDS401A15875
103.50 103.50
15,800 15,875
.6220 .6250
45 45
2,7 2,7
115 115
48 48
16 16
VDS201A15900 VDS201A16000
66.45 66.45
VDS401A15900 VDS401A16000
103.50 103.50
15,900 16,000
.6260 .6299
45 45
2,8 2,8
115 115
48 48
16 16
VDS201A16100 VDS201A16200
77.25 77.25
VDS401A16100 VDS401A16200
120.00 120.00
16,100 16,200
.6339 .6378
51 51
2,8 2,8
123 123
48 48
18 18
VDS201A16271 VDS201A16300
77.25 77.25
VDS401A16271 VDS401A16300
120.00 120.00
16,271 16,300
.6406 .6417
51 51
2,8 2,8
123 123
48 48
18 18
(continued)
20
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 20
WWW.WIDIA.COM
2/11/15 11:28 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D ™
(VDS201A/VDS401A • 3 x D continued)
VDS201A • WU25PD VDS201A16400 VDS201A16500
£ 77.25 77.25
VDS401A • WU25PD VDS401A16400 VDS401A16500
£ 120.00 120.00
D1 diameter mm in 16,400 .6457 16,500 .6496
VDS201A16600 VDS201A16670
77.25 77.25
VDS401A16600 VDS401A16670
120.00 120.00
16,600 16,670
VDS201A16700 VDS201A16800
77.25 77.25
VDS401A16700 VDS401A16800
120.00 120.00
VDS201A16900 VDS201A17000
77.25 77.25
VDS401A16900 VDS401A17000
VDS201A17100 VDS201A17200
92.63 92.63
VDS201A17300 VDS201A17400
L4 max 51 51
L5 2,8 2,9
L 123 123
LS 48 48
D 18 18
.6535 .6563
51 51
2,9 2,9
123 123
48 48
18 18
16,700 16,800
.6575 .6614
51 51
2,9 2,9
123 123
48 48
18 18
120.00 120.00
16,900 17,000
.6654 .6693
51 51
2,9 2,9
123 123
48 48
18 18
VDS401A17100 VDS401A17200
144.00 144.00
17,100 17,200
.6732 .6772
51 51
3,0 3,0
123 123
48 48
18 18
92.63 92.63
VDS401A17300 VDS401A17400
144.00 144.00
17,300 17,400
.6811 .6850
51 51
3,0 3,0
123 123
48 48
18 18
VDS201A17463 VDS201A17500
92.63 92.63
VDS401A17463 VDS401A17500
144.00 144.00
17,463 17,500
.6875 .6890
51 51
3,0 3,0
123 123
48 48
18 18
VDS201A17600 VDS201A17700
92.63 92.63
VDS401A17600 VDS401A17700
144.00 144.00
17,600 17,700
.6929 .6969
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A17800 VDS201A17859
92.63 92.63
VDS401A17800 VDS401A17859
144.00 144.00
17,800 17,859
.7008 .7031
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A17900 VDS201A18000
92.63 92.63
VDS401A17900 VDS401A18000
144.00 144.00
17,900 18,000
.7047 .7087
51 51
3,1 3,1
123 123
48 48
18 18
VDS201A18100 VDS201A18200
100.88 100.88
VDS401A18100 VDS401A18200
156.38 156.38
18,100 18,200
.7126 .7165
55 55
3,1 3,2
131 131
50 50
20 20
VDS201A18258 VDS201A18300
100.88 100.88
VDS401A18258 VDS401A18300
156.38 156.38
18,258 18,300
.7188 .7205
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18400 VDS201A18500
100.88 100.88
VDS401A18400 VDS401A18500
156.38 156.38
18,400 18,500
.7244 .7283
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18600 VDS201A18654
100.88 100.88
VDS401A18600 VDS401A18654
156.38 156.38
18,600 18,654
.7323 .7344
55 55
3,2 3,2
131 131
50 50
20 20
VDS201A18700 VDS201A18800
100.88 100.88
VDS401A18700 VDS401A18800
156.38 156.38
18,700 18,800
.7362 .7402
55 55
3,2 3,3
131 131
50 50
20 20
VDS201A18900 VDS201A19000
100.88 100.88
VDS401A18900 VDS401A19000
156.38 156.38
18,900 19,000
.7441 .7480
55 55
3,3 3,3
131 131
50 50
20 20
VDS201A19050 VDS201A19100
108.38 108.38
VDS401A19050 VDS401A19100
168.00 168.00
19,050 19,100
.7500 .7520
55 55
3,3 3,3
131 131
50 50
20 20
VDS201A19200 VDS201A19300
108.38 108.38
VDS401A19200 VDS401A19300
168.00 168.00
19,200 19,300
.7559 .7598
55 55
3,3 3,4
131 131
50 50
20 20
VDS201A19400 VDS201A19500
108.38 108.38
VDS401A19400 VDS401A19500
168.00 168.00
19,400 19,500
.7638 .7677
55 55
3,4 3,4
131 131
50 50
20 20
VDS201A19600 VDS201A19700
108.38 108.38
VDS401A19600 VDS401A19700
168.00 168.00
19,600 19,700
.7717 .7756
55 55
3,4 3,4
131 131
50 50
20 20
VDS201A19800 VDS201A19900
108.38 108.38
VDS401A19800 VDS401A19900
168.00 168.00
19,800 19,900
.7795 .7835
55 55
3,4 3,5
131 131
50 50
20 20
VDS201A20000
108.38
VDS401A20000
168.00
20,000
.7874
55
3,5
131
50
20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_12-21.indd 21
21
2/11/15 11:28 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
nVDS202A/VDS402A • 5 x D
VDS202A • WU25PD VDS202A01000 VDS202A01016
£ 26.89 27.34
VDS402A • WU25PD — —
£ — —
D1 diameter mm in 1,000 .0394 1,016 .0400
VDS202A01041 VDS202A01067
27.34 27.34
— —
— —
1,041 1,067
.0410 .0420
VDS202A01092 VDS202A01100
27.34 27.34
— —
— —
1,092 1,100
.0430 .0433
VDS202A01181 VDS202A01191
27.34 27.34
— —
— —
1,181 1,191
.0465 .0469
VDS202A01200 VDS202A01300
27.34 27.34
— —
— —
1,200 1,300
.0472 .0512
VDS202A01321 VDS202A01397
27.34 27.34
— —
— —
1,321 1,397
.0520 .0550
VDS202A01400 VDS202A01500
27.34 27.34
— VDS402A01500
— 36.90
1,400 1,500
.0551 .0591
VDS202A01600 VDS202A01700
27.34 27.34
VDS402A01600 VDS402A01700
36.90 36.90
1,600 1,700
.0630 .0669
VDS202A01800 VDS202A01900
27.34 27.34
VDS402A01800 VDS402A01900
36.90 36.90
1,800 1,900
.0709 .0748
VDS202A01984 VDS202A02000
27.34 27.34
VDS402A01984 VDS402A02000
36.90 36.90
1,984 2,000
VDS202A02100 VDS202A02200
27.86 27.86
VDS402A02100 VDS402A02200
37.65 37.65
VDS202A02300 VDS202A02383
27.86 27.86
VDS402A02300 VDS402A02383
VDS202A02400 VDS202A02439
27.86 27.86
VDS202A02489 VDS202A02500
L4 max 6 6
L5 0,1 0,1
6 6
0,2 0,2
6 6
0,2 0,2
6 6
0,2 0,2
6 6
0,2 0,2
6 6
0,2 0,2
6 9
0,2 0,2
9 9
0,2 0,3
9 9
0,3 0,3
.0781 .0787
14 14
0,3 0,3
2,100 2,200
.0827 .0866
14 14
0,3 0,3
37.65 37.65
2,300 2,383
.0906 .0938
14 17
0,4 0,4
VDS402A02400 VDS402A02439
37.65 37.65
2,400 2,439
.0945 .0960
17 17
0,4 0,4
27.86 27.86
VDS402A02489 VDS402A02500
37.65 37.65
2,489 2,500
.0980 .0984
17 17
0,4 0,4
VDS202A02578 VDS202A02600
27.86 27.86
VDS402A02578 VDS402A02600
37.65 37.65
2,578 2,600
.1015 .1024
17 17
0,4 0,4
VDS202A02642 VDS202A02700
27.86 27.86
VDS402A02642 VDS402A02700
37.65 37.65
2,642 2,700
.1040 .1063
17 17
0,4 0,4
VDS202A02705 VDS202A02779
27.86 27.86
VDS402A02705 VDS402A02779
37.65 37.65
2,705 2,779
.1065 .1094
17 17
0,4 0,4
VDS202A02800 VDS202A02820
27.86 27.86
VDS402A02800 VDS402A02820
37.65 37.65
2,800 2,820
.1102 .1110
17 17
0,5 0,5
VDS202A02870 VDS202A02900
27.86 27.86
VDS402A02870 VDS402A02900
37.65 37.65
2,870 2,900
.1130 .1142
17 17
0,5 0,5
VDS202A02947 VDS202A03000
27.86 27.86
VDS402A02947 VDS402A03000
37.65 37.65
2,947 3,000
.1160 .1181
17 23
0,5 0,5
L 58 58
LS 28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 58
28 28
58 66
28 36
D 4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 6
(continued)
22
A-13-03523EN_me_WIDIA_SlimLine_Catalog_22-27.indd 22
WWW.WIDIA.COM
2/11/15 11:29 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D ™
(VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A03048 VDS202A03100
£ 28.31 28.31
VDS402A • WU25PD VDS402A03048 VDS402A03100
£ 38.33 38.33
D1 diameter mm in 3,048 .1200 3,100 .1220
VDS202A03175 VDS202A03200
28.31 28.31
VDS402A03175 VDS402A03200
38.33 38.33
3,175 3,200
VDS202A03264 VDS202A03300
28.31 28.31
VDS402A03264 VDS402A03300
38.33 38.33
VDS202A03400 VDS202A03455
28.31 28.31
VDS402A03400 VDS402A03455
VDS202A03500 VDS202A03571
28.31 28.31
VDS202A03600 VDS202A03658
L4 max 23 23
L5 0,5 0,5
.1250 .1260
23 23
0,5 0,5
3,264 3,300
.1285 .1299
23 23
0,5 0,5
38.33 38.33
3,400 3,455
.1339 .1360
23 23
0,6 0,6
VDS402A03500 VDS402A03571
38.33 38.33
3,500 3,571
.1378 .1406
23 23
0,6 0,6
28.31 28.31
VDS402A03600 VDS402A03658
38.33 38.33
3,600 3,658
.1417 .1440
23 23
0,6 0,6
VDS202A03700 VDS202A03734
28.31 28.31
VDS402A03700 VDS402A03734
38.33 38.33
3,700 3,734
.1457 .1470
23 23
0,6 0,6
VDS202A03800 VDS202A03900
28.31 28.31
VDS402A03800 VDS402A03900
38.33 38.33
3,800 3,900
.1496 .1535
29 29
0,6 0,6
VDS202A03970 VDS202A04000
28.31 28.31
VDS402A03970 VDS402A04000
38.33 38.33
3,970 4,000
.1563 .1575
29 29
0,7 0,7
VDS202A04039 VDS202A04090
28.84 28.84
VDS402A04039 VDS402A04090
39.68 39.68
4,039 4,090
.1590 .1610
29 29
0,7 0,7
VDS202A04100 VDS202A04200
28.84 28.84
VDS402A04100 VDS402A04200
39.68 39.68
4,100 4,200
.1614 .1654
29 29
0,7 0,7
VDS202A04217 VDS202A04300
28.84 28.84
VDS402A04217 VDS402A04300
39.68 39.68
4,217 4,300
.1660 .1693
29 29
0,7 0,7
VDS202A04366 VDS202A04400
28.84 28.84
VDS402A04366 VDS402A04400
39.68 39.68
4,366 4,400
.1719 .1732
29 29
0,7 0,7
VDS202A04500 VDS202A04600
28.84 28.84
VDS402A04500 VDS402A04600
39.68 39.68
4,500 4,600
.1772 .1811
29 29
0,7 0,8
VDS202A04623 VDS202A04700
28.84 28.84
VDS402A04623 VDS402A04700
39.68 39.68
4,623 4,700
.1820 .1850
29 29
0,8 0,8
VDS202A04763 VDS202A04800
28.84 28.84
VDS402A04763 VDS402A04800
39.68 39.68
4,763 4,800
.1875 .1890
35 35
0,8 0,8
VDS202A04852 VDS202A04900
28.84 28.84
VDS402A04852 VDS402A04900
39.68 39.68
4,852 4,900
.1910 .1929
35 35
0,8 0,8
VDS202A05000 VDS202A05100
28.84 28.84
VDS402A05000 VDS402A05100
39.68 40.35
5,000 5,100
.1969 .2008
35 35
0,8 0,8
VDS202A05106 VDS202A05159
28.84 28.84
VDS402A05106 VDS402A05159
40.35 40.35
5,106 5,159
.2010 .2031
35 35
0,8 0,9
VDS202A05200 VDS202A05300
28.84 28.84
VDS402A05200 VDS402A05300
40.35 40.35
5,200 5,300
.2047 .2087
35 35
0,9 0,9
VDS202A05400 VDS202A05410
28.84 28.84
VDS402A05400 VDS402A05410
40.35 40.35
5,400 5,410
.2126 .2130
35 35
0,9 0,9
VDS202A05500 VDS202A05558
28.84 28.84
VDS402A05500 VDS402A05558
40.35 40.35
5,500 5,558
.2165 .2188
35 35
0,9 0,9
L 66 66
LS 36 36
66 66
36 36
66 66
36 36
66 66
36 36
66 66
36 36
66 66
36 36
66 66
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
74 74
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
82 82
36 36
D 6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
(continued)
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_22-27.indd 23
23
2/11/15 11:29 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A05600 VDS202A05616
£ 28.84 28.84
VDS402A • WU25PD VDS402A05600 VDS402A05616
£ 40.35 40.35
D1 diameter mm in 5,600 .2205 5,616 .2211
VDS202A05700 VDS202A05800
28.84 28.84
VDS402A05700 VDS402A05800
40.35 40.35
5,700 5,800
VDS202A05900 VDS202A05954
28.84 28.84
VDS402A05900 VDS402A05954
40.35 40.35
VDS202A06000 VDS202A06100
28.84 29.25
VDS402A06000 VDS402A06100
VDS202A06200 VDS202A06300
29.25 29.25
VDS202A06350 VDS202A06400
L4 max 35 35
L5 0,9 0,9
L 82 82
LS 36 36
.2244 .2283
35 35
1,0 1,0
82 82
36 36
5,900 5,954
.2323 .2344
35 35
1,0 1,0
82 82
36 36
40.35 43.95
6,000 6,100
.2362 .2402
35 43
1,0 1,0
82 91
36 36
VDS402A06200 VDS402A06300
43.95 43.95
6,200 6,300
.2441 .2480
43 43
1,0 1,1
91 91
36 36
29.25 29.25
VDS402A06350 VDS402A06400
43.95 43.95
6,350 6,400
.2500 .2520
43 43
1,1 1,1
91 91
36 36
VDS202A06500 VDS202A06528
29.25 29.25
VDS402A06500 VDS402A06528
43.95 43.95
6,500 6,528
.2559 .2570
43 43
1,1 1,1
91 91
36 36
VDS202A06600 VDS202A06630
29.25 29.25
VDS402A06600 VDS402A06630
43.95 43.95
6,600 6,630
.2598 .2610
43 43
1,1 1,1
91 91
36 36
VDS202A06700 VDS202A06746
29.25 29.25
VDS402A06700 VDS402A06746
43.95 43.95
6,700 6,746
.2638 .2656
43 43
1,1 1,1
91 91
36 36
VDS202A06800 VDS202A06900
29.25 29.25
VDS402A06800 VDS402A06900
43.95 43.95
6,800 6,900
.2677 .2717
43 43
1,1 1,2
91 91
36 36
VDS202A07000 VDS202A07100
29.25 30.30
VDS402A07000 VDS402A07100
43.95 47.03
7,000 7,100
.2756 .2795
43 43
1,2 1,2
91 91
36 36
VDS202A07145 VDS202A07200
30.30 30.30
VDS402A07145 VDS402A07200
47.03 47.03
7,145 7,200
.2813 .2835
43 43
1,2 1,2
91 91
36 36
VDS202A07300 VDS202A07400
30.30 30.30
VDS402A07300 VDS402A07400
47.03 47.03
7,300 7,400
.2874 .2913
43 43
1,2 1,3
91 91
36 36
VDS202A07500 VDS202A07541
30.30 30.30
VDS402A07500 VDS402A07541
47.03 47.03
7,500 7,541
.2953 .2969
43 43
1,3 1,3
91 91
36 36
VDS202A07600 VDS202A07700
30.30 30.30
VDS402A07600 VDS402A07700
47.03 47.03
7,600 7,700
.2992 .3031
43 43
1,3 1,3
91 91
36 36
VDS202A07800 VDS202A07900
30.30 30.30
VDS402A07800 VDS402A07900
47.03 47.03
7,800 7,900
.3071 .3110
43 43
1,3 1,3
91 91
36 36
VDS202A07938 VDS202A08000
30.30 30.30
VDS402A07938 VDS402A08000
47.03 47.03
7,938 8,000
.3125 .3150
43 43
1,3 1,4
91 91
36 36
VDS202A08100 VDS202A08200
33.23 33.23
VDS402A08100 VDS402A08200
51.53 51.53
8,100 8,200
.3189 .3228
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08300 VDS202A08334
33.23 33.23
VDS402A08300 VDS402A08334
51.53 51.53
8,300 8,334
.3268 .3281
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08400 VDS202A08433
33.23 33.23
VDS402A08400 VDS402A08433
51.53 51.53
8,400 8,433
.3307 .3320
49 49
1,4 1,4
103 103
40 40
10 10
VDS202A08500 VDS202A08600
33.23 33.23
VDS402A08500 VDS402A08600
51.53 51.53
8,500 8,600
.3346 .3386
49 49
1,4 1,5
103 103
40 40
10 10
VDS202A08700 VDS202A08733
33.23 33.23
VDS402A08700 VDS402A08733
51.53 51.53
8,700 8,733
.3425 .3438
49 49
1,5 1,5
103 103
40 40
10 10
VDS202A08800 VDS202A08900
33.23 33.23
VDS402A08800 VDS402A08900
51.53 51.53
8,800 8,900
.3465 .3504
49 49
1,5 1,5
103 103
40 40
10 10
D 6 6
6 6
6 6
6 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
(continued)
24
A-13-03523EN_me_WIDIA_SlimLine_Catalog_22-27.indd 24
WWW.WIDIA.COM
2/11/15 11:29 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D ™
(VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A09000 VDS202A09100
£ 33.23 38.33
VDS402A • WU25PD VDS402A09000 VDS402A09100
£ 51.53 51.90
VDS202A09129 VDS202A09200
38.33 38.33
VDS402A09129 VDS402A09200
51.90 51.90
VDS202A09300 VDS202A09347
38.33 38.33
VDS402A09300 VDS402A09347
51.90 51.90
VDS202A09400 VDS202A09500
38.33 38.33
VDS402A09400 VDS402A09500
51.90 51.90
VDS202A09525 VDS202A09600
38.33 38.33
VDS402A09525 VDS402A09600
51.90 51.90
VDS202A09700 VDS202A09800
38.33 38.33
VDS402A09700 VDS402A09800
51.90 51.90
VDS202A09900 VDS202A09921
38.33 38.33
VDS402A09900 VDS402A09921
51.90 51.90
VDS202A10000 VDS202A10100
38.33 43.95
VDS402A10000 VDS402A10100
VDS202A10200 VDS202A10300
43.95 43.95
VDS202A10320 VDS202A10400
D1 diameter mm in .3543 9,000 .3583 9,100
L4 max 49 49
L5 1,5 1,5
L 103 103
LS 40 40
D 10 10
9,129 9,200
.3594 .3622
49 49
1,6 1,6
103 103
40 40
10 10
9,300 9,347
.3661 .3680
49 49
1,6 1,6
103 103
40 40
10 10
9,400 9,500
.3701 .3740
49 49
1,6 1,6
103 103
40 40
10 10
9,525 9,600
.3750 .3780
49 49
1,6 1,6
103 103
40 40
10 10
9,700 9,800
.3819 .3858
49 49
1,7 1,7
103 103
40 40
10 10
9,900 9,921
.3898 .3906
49 49
1,7 1,7
103 103
40 40
10 10
51.90 68.25
10,000 10,100
.3937 .3976
49 56
1,7 1,7
103 118
40 45
10 12
VDS402A10200 VDS402A10300
68.25 68.25
10,200 10,300
.4016 .4055
56 56
1,7 1,8
118 118
45 45
12 12
43.95 43.95
VDS402A10320 VDS402A10400
68.25 68.25
10,320 10,400
.4063 .4094
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10500 VDS202A10600
43.95 43.95
VDS402A10500 VDS402A10600
68.25 68.25
10,500 10,600
.4134 .4173
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10700 VDS202A10716
43.95 43.95
VDS402A10700 VDS402A10716
68.25 68.25
10,700 10,716
.4213 .4219
56 56
1,8 1,8
118 118
45 45
12 12
VDS202A10800 VDS202A10900
43.95 43.95
VDS402A10800 VDS402A10900
68.25 68.25
10,800 10,900
.4252 .4291
56 56
1,8 1,9
118 118
45 45
12 12
VDS202A11000 VDS202A11100
43.95 45.90
VDS402A11000 VDS402A11100
68.25 71.33
11,000 11,100
.4331 .4370
56 56
1,9 1,9
118 118
45 45
12 12
VDS202A11113 VDS202A11200
45.90 45.90
VDS402A11113 VDS402A11200
71.33 71.33
11,113 11,200
.4375 .4409
56 56
1,9 1,9
118 118
45 45
12 12
VDS202A11300 VDS202A11400
45.90 45.90
VDS402A11300 VDS402A11400
71.33 71.33
11,300 11,400
.4449 .4488
56 56
1,9 2,0
118 118
45 45
12 12
VDS202A11500 VDS202A11509
45.90 45.90
VDS402A11500 VDS402A11509
71.33 71.33
11,500 11,509
.4528 .4531
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11600 VDS202A11700
45.90 45.90
VDS402A11600 VDS402A11700
71.33 71.33
11,600 11,700
.4567 .4606
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11800 VDS202A11900
45.90 45.90
VDS402A11800 VDS402A11900
71.33 71.33
11,800 11,900
.4646 .4685
56 56
2,0 2,0
118 118
45 45
12 12
VDS202A11908 VDS202A12000
45.90 45.90
VDS402A11908 VDS402A12000
71.33 71.33
11,908 12,000
.4688 .4724
56 56
2,0 2,1
118 118
45 45
12 12
VDS202A12100 VDS202A12200
61.58 61.58
VDS402A12100 VDS402A12200
95.25 95.25
12,100 12,200
.4764 .4803
60 60
2,1 2,1
124 124
45 45
14 14
VDS202A12300 VDS202A12304
61.58 61.58
VDS402A12300 VDS402A12304
95.25 95.25
12,300 12,304
.4843 .4844
60 60
2,1 2,1
124 124
45 45
14 14
VDS202A12400 VDS202A12500
61.58 61.58
VDS402A12400 VDS402A12500
95.25 95.25
12,400 12,500
.4882 .4921
60 60
2,1 2,1
124 124
45 45
14 14
(continued)
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_22-27.indd 25
25
2/11/15 11:29 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D (VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A12600 VDS202A12700
£ 61.58 61.58
VDS402A • WU25PD VDS402A12600 VDS402A12700
£ 95.25 95.25
D1 diameter mm in 12,600 .4961 12,700 .5000
VDS202A12800 VDS202A12900
61.58 61.58
VDS402A12800 VDS402A12900
95.25 95.25
12,800 12,900
VDS202A13000 VDS202A13096
61.58 63.53
VDS402A13000 VDS402A13096
95.25 98.63
VDS202A13100 VDS202A13200
63.53 63.53
VDS402A13100 VDS402A13200
VDS202A13300 VDS202A13400
63.53 63.53
VDS202A13500 VDS202A13600
L4 max 60 60
L5 2,2 2,2
L 124 124
LS 45 45
D 14 14
.5039 .5079
60 60
2,2 2,2
124 124
45 45
14 14
13,000 13,096
.5118 .5156
60 60
2,2 2,3
124 124
45 45
14 14
98.63 98.63
13,100 13,200
.5157 .5197
60 60
2,3 2,3
124 124
45 45
14 14
VDS402A13300 VDS402A13400
98.63 98.63
13,300 13,400
.5236 .5276
60 60
2,3 2,3
124 124
45 45
14 14
63.53 63.53
VDS402A13500 VDS402A13600
98.63 98.63
13,500 13,600
.5315 .5354
60 60
2,3 2,3
124 124
45 45
14 14
VDS202A13700 VDS202A13800
63.53 63.53
VDS402A13700 VDS402A13800
98.63 98.63
13,700 13,800
.5394 .5433
60 60
2,4 2,4
124 124
45 45
14 14
VDS202A13891 VDS202A13900
63.53 63.53
VDS402A13891 VDS402A13900
98.63 98.63
13,891 13,900
.5469 .5472
60 60
2,4 2,4
124 124
45 45
14 14
VDS202A14000 VDS202A14100
63.53 73.20
VDS402A14000 VDS402A14100
98.63 114.00
14,000 14,100
.5512 .5551
60 63
2,4 2,4
124 133
45 48
14 16
VDS202A14200 VDS202A14288
73.20 73.20
VDS402A14200 VDS402A14288
114.00 114.00
14,200 14,288
.5591 .5625
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14300 VDS202A14400
73.20 73.20
VDS402A14300 VDS402A14400
114.00 114.00
14,300 14,400
.5630 .5669
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14500 VDS202A14600
73.20 73.20
VDS402A14500 VDS402A14600
114.00 114.00
14,500 14,600
.5709 .5748
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14684 VDS202A14700
73.20 73.20
VDS402A14684 VDS402A14700
114.00 114.00
14,684 14,700
.5781 .5787
63 63
2,5 2,5
133 133
48 48
16 16
VDS202A14800 VDS202A14900
73.20 73.20
VDS402A14800 VDS402A14900
114.00 114.00
14,800 14,900
.5827 .5866
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15000 VDS202A15083
73.20 83.25
VDS402A15000 VDS402A15083
114.00 128.25
15,000 15,083
.5906 .5938
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15100 VDS202A15200
83.25 83.25
VDS402A15100 VDS402A15200
128.25 128.25
15,100 15,200
.5945 .5984
63 63
2,6 2,6
133 133
48 48
16 16
VDS202A15300 VDS202A15400
83.25 83.25
VDS402A15300 VDS402A15400
128.25 128.25
15,300 15,400
.6024 .6063
63 63
2,6 2,7
133 133
48 48
16 16
VDS202A15479 VDS202A15500
83.25 83.25
VDS402A15479 VDS402A15500
128.25 128.25
15,479 15,500
.6094 .6102
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15600 VDS202A15700
83.25 83.25
VDS402A15600 VDS402A15700
128.25 128.25
15,600 15,700
.6142 .6181
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15800 VDS202A15875
83.25 83.25
VDS402A15800 VDS402A15875
128.25 128.25
15,800 15,875
.6220 .6250
63 63
2,7 2,7
133 133
48 48
16 16
VDS202A15900 VDS202A16000
83.25 83.25
VDS402A15900 VDS402A16000
128.25 128.25
15,900 16,000
.6260 .6299
63 63
2,8 2,8
133 133
48 48
16 16
VDS202A16100 VDS202A16200
96.38 96.38
VDS402A16100 VDS402A16200
150.00 150.00
16,100 16,200
.6339 .6378
71 71
2,8 2,8
143 143
48 48
18 18
VDS202A16271 VDS202A16300
96.38 96.38
VDS402A16271 VDS402A16300
150.00 150.00
16,271 16,300
.6406 .6417
71 71
2,8 2,8
143 143
48 48
18 18
(continued)
26
A-13-03523EN_me_WIDIA_SlimLine_Catalog_22-27.indd 26
WWW.WIDIA.COM
2/11/15 11:29 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D ™
(VDS202A/VDS402A • 5 x D continued)
VDS202A • WU25PD VDS202A16400 VDS202A16500
£ 96.38 96.38
VDS402A • WU25PD VDS402A16400 VDS402A16500
£ 150.00 150.00
D1 diameter mm in 16,400 .6457 16,500 .6496
VDS202A16600 VDS202A16670
96.38 96.38
VDS402A16600 VDS402A16670
150.00 150.00
16,600 16,670
VDS202A16700 VDS202A16800
96.38 96.38
VDS402A16700 VDS402A16800
150.00 150.00
VDS202A16900 VDS202A17000
96.38 96.38
VDS402A16900 VDS402A17000
VDS202A17100 VDS202A17200
116.63 116.63
VDS202A17300 VDS202A17400
L4 max 71 71
L5 2,8 2,9
L 143 143
LS 48 48
D 18 18
.6535 .6563
71 71
2,9 2,9
143 143
48 48
18 18
16,700 16,800
.6575 .6614
71 71
2,9 2,9
143 143
48 48
18 18
150.00 150.00
16,900 17,000
.6654 .6693
71 71
2,9 2,9
143 143
48 48
18 18
VDS402A17100 VDS402A17200
180.38 180.38
17,100 17,200
.6732 .6772
71 71
3,0 3,0
143 143
48 48
18 18
116.63 116.63
VDS402A17300 VDS402A17400
180.38 180.38
17,300 17,400
.6811 .6850
71 71
3,0 3,0
143 143
48 48
18 18
VDS202A17463 VDS202A17500
116.63 116.63
VDS402A17463 VDS402A17500
180.38 180.38
17,463 17,500
.6875 .6890
71 71
3,0 3,0
143 143
48 48
18 18
VDS202A17600 VDS202A17700
116.63 116.63
VDS402A17600 VDS402A17700
180.38 180.38
17,600 17,700
.6929 .6969
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A17800 VDS202A17859
116.63 116.63
VDS402A17800 VDS402A17859
180.38 180.38
17,800 17,859
.7008 .7031
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A17900 VDS202A18000
116.63 116.63
VDS402A17900 VDS402A18000
180.38 180.38
17,900 18,000
.7047 .7087
71 71
3,1 3,1
143 143
48 48
18 18
VDS202A18100 VDS202A18200
126.38 126.38
VDS402A18100 VDS402A18200
189.75 189.75
18,100 18,200
.7126 .7165
77 77
3,1 3,2
153 153
50 50
20 20
VDS202A18258 VDS202A18300
126.38 126.38
VDS402A18258 VDS402A18300
189.75 189.75
18,258 18,300
.7188 .7205
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18400 VDS202A18500
126.38 126.38
VDS402A18400 VDS402A18500
189.75 189.75
18,400 18,500
.7244 .7283
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18600 VDS202A18654
126.38 126.38
VDS402A18600 VDS402A18654
189.75 189.75
18,600 18,654
.7323 .7344
77 77
3,2 3,2
153 153
50 50
20 20
VDS202A18700 VDS202A18800
126.38 126.38
VDS402A18700 VDS402A18800
189.75 189.75
18,700 18,800
.7362 .7402
77 77
3,2 3,3
153 153
50 50
20 20
VDS202A18900 VDS202A19000
126.38 126.38
VDS402A18900 VDS402A19000
189.75 189.75
18,900 19,000
.7441 .7480
77 77
3,3 3,3
153 153
50 50
20 20
VDS202A19050 VDS202A19100
136.13 136.13
VDS402A19050 VDS402A19100
210.38 210.38
19,050 19,100
.7500 .7520
77 77
3,3 3,3
153 153
50 50
20 20
VDS202A19200 VDS202A19300
136.13 136.13
VDS402A19200 VDS402A19300
210.38 210.38
19,200 19,300
.7559 .7598
77 77
3,3 3,4
153 153
50 50
20 20
VDS202A19400 VDS202A19500
136.13 136.13
VDS402A19400 VDS402A19500
210.38 210.38
19,400 19,500
.7638 .7677
77 77
3,4 3,4
153 153
50 50
20 20
VDS202A19600 VDS202A19700
136.13 136.13
VDS402A19600 VDS402A19700
210.38 210.38
19,600 19,700
.7717 .7756
77 77
3,4 3,4
153 153
50 50
20 20
VDS202A19800 VDS202A19900
136.13 136.13
VDS402A19800 VDS402A19900
210.38 210.38
19,800 19,900
.7795 .7835
77 77
3,4 3,5
153 153
50 50
20 20
VDS202A20000
136.13
VDS402A20000
210.38
20,000
.7874
77
3,5
153
50
20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_22-27.indd 27
27
2/11/15 11:29 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
nVDS403A • 8 x D
D1 diameter VDS403A • WU25PD VDS403A01500 VDS403A01600
£ 59.10 59.10
VDS403A01700 VDS403A01800
59.10 59.10
VDS403A01900 VDS403A01984
59.10 59.10
VDS403A02000 VDS403A02100
59.10 60.08
VDS403A02200 VDS403A02300
60.08 60.08
VDS403A02383 VDS403A02400
60.08 60.08
VDS403A02439 VDS403A02489
60.08 60.08
VDS403A02500 VDS403A02578
60.08 60.08
VDS403A02600 VDS403A02642
60.08 60.08
VDS403A02700 VDS403A02705
60.08 60.08
VDS403A02779 VDS403A02800
60.08 60.08
VDS403A02820 VDS403A02870
60.08 60.08
VDS403A02900 VDS403A02947
60.08 60.08
VDS403A03000 VDS403A03048
60.08 61.13
VDS403A03100 VDS403A03175
61.13 61.13
VDS403A03200 VDS403A03264
61.13 61.13
VDS403A03300 VDS403A03400
61.13 61.13
VDS403A03455 VDS403A03500
61.13 61.13
VDS403A03571 VDS403A03600
61.13 61.13
VDS403A03658 VDS403A03700
61.13 61.13
mm 1,500 1,600
in .0591 .0630
1,700 1,800
.0669 .0709
1,900 1,984
.0748 .0781
2,000 2,100
.0787 .0827
2,200 2,300
.0866 .0906
2,383 2,400
.0938 .0945
2,439 2,489
.0960 .0980
2,500 2,578
.0984 .1015
2,600 2,642
.1024 .1040
2,700 2,705
.1063 .1065
2,779 2,800
.1094 .1102
2,820 2,870
.1110 .1130
2,900 2,947
.1142 .1160
3,000 3,048
.1181 .1200
3,100 3,175
.1220 .1250
3,200 3,264
.1260 .1285
3,300 3,400
.1299 .1339
3,455 3,500
.1360 .1378
3,571 3,600
.1406 .1417
3,658 3,700
.1440 .1457
L 58 58
58 58
L4 max 15 15
L5 0,2 0,2
LS 28 28
15 15
0,3 0,3
28 28
15 22
0,3 0,3
28 28
22 22
0,3 0,3
28 28
22 22
0,3 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,4
28 28
25 25
0,4 0,5
28 28
25 25
0,5 0,5
28 28
25 25
0,5 0,5
28 28
33 33
0,5 0,5
36 36
33 33
0,5 0,5
36 36
33 33
0,5 0,5
36 36
33 33
0,5 0,6
36 36
33 33
0,6 0,6
36 36
33 33
0,6 0,6
36 36
33 33
0,6 0,6
36 36
58 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
66 66
78 78
78 78
78 78
78 78
78 78
78 78
78 78
D 4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
4 4
6 6
6 6
6 6
6 6
6 6
6 6
6 6
(continued)
28
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 28
WWW.WIDIA.COM
2/11/15 11:31 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D ™
(VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A03734 VDS403A03800
£ 61.13 61.13
VDS403A03900 VDS403A03970
61.13 61.13
VDS403A04000 VDS403A04039
61.13 63.38
VDS403A04090 VDS403A04100
63.38 63.38
VDS403A04200 VDS403A04217
63.38 63.38
VDS403A04300 VDS403A04366
63.38 63.38
VDS403A04400 VDS403A04500
63.38 63.38
VDS403A04600 VDS403A04623
63.38 63.38
VDS403A04700 VDS403A04763
63.38 63.38
VDS403A04800 VDS403A04852
63.38 63.38
VDS403A04900 VDS403A05000
63.38 63.38
VDS403A05100 VDS403A05106
64.58 64.58
VDS403A05159 VDS403A05200
64.58 64.58
VDS403A05300 VDS403A05400
64.58 64.58
VDS403A05410 VDS403A05500
64.58 64.58
VDS403A05558 VDS403A05600
64.58 64.58
VDS403A05616 VDS403A05700
64.58 64.58
VDS403A05800 VDS403A05900
64.58 64.58
VDS403A05954 VDS403A06000
64.58 64.58
VDS403A06100 VDS403A06200
70.28 70.28
VDS403A06300 VDS403A06350
70.28 70.28
VDS403A06400 VDS403A06500
70.28 70.28
mm 3,734 3,800
in .1470 .1496
3,900 3,970
.1535 .1563
4,000 4,039
.1575 .1590
4,090 4,100
.1610 .1614
4,200 4,217
.1654 .1660
4,300 4,366
.1693 .1719
4,400 4,500
.1732 .1772
4,600 4,623
.1811 .1820
4,700 4,763
.1850 .1875
4,800 4,852
.1890 .1910
4,900 5,000
.1929 .1969
5,100 5,106
.2008 .2010
5,159 5,200
.2031 .2047
5,300 5,400
.2087 .2126
5,410 5,500
.2130 .2165
5,558 5,600
.2188 .2205
5,616 5,700
.2211 .2244
5,800 5,900
.2283 .2323
5,954 6,000
.2344 .2362
6,100 6,200
.2402 .2441
105 105
6,300 6,350
.2480 .2500
105 105
6,400 6,500
.2520 .2559
105 105
L 78 87
87 87
L4 max 33 41
L5 0,6 0,6
LS 36 36
41 41
0,6 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,7 0,7
36 36
41 41
0,8 0,8
36 36
41 48
0,8 0,8
36 36
48 48
0,8 0,8
36 36
48 48
0,8 0,8
36 36
48 48
0,8 0,8
36 36
48 48
0,9 0,9
36 36
48 48
0,9 0,9
36 36
48 48
0,9 0,9
36 36
48 48
0,9 0,9
36 36
48 48
0,9 1,0
36 36
48 48
1,0 1,0
36 36
48 48
1,0 1,0
36 36
57 57
1,0 1,0
36 36
57 57
1,1 1,1
36 36
57 57
1,1 1,1
36 36
87 87
87 87
87 87
87 87
87 87
87 87
87 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
94 94
D 6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
6 6
8 8
8 8
8 8
(continued)
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 29
29
2/11/15 11:31 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A06528 VDS403A06600
£ 70.28 70.28
VDS403A06630 VDS403A06700
70.28 70.28
VDS403A06746 VDS403A06800
70.28 70.28
VDS403A06900 VDS403A07000
70.28 70.28
VDS403A07100 VDS403A07145
75.38 75.38
VDS403A07200 VDS403A07300
75.38 75.38
VDS403A07400 VDS403A07500
75.38 75.38
VDS403A07541 VDS403A07600
75.38 75.38
VDS403A07700 VDS403A07800
75.38 75.38
VDS403A07900 VDS403A07938
75.38 75.38
VDS403A08000 VDS403A08100
75.38 82.13
VDS403A08200 VDS403A08300
82.13 82.13
VDS403A08334 VDS403A08400
82.13 82.13
VDS403A08433 VDS403A08500
82.13 82.13
VDS403A08600 VDS403A08700
82.13 82.13
VDS403A08733 VDS403A08800
82.13 82.13
VDS403A08900 VDS403A09000
82.13 82.13
VDS403A09100 VDS403A09129
93.38 93.38
VDS403A09200 VDS403A09300
93.38 93.38
VDS403A09347 VDS403A09400
93.38 93.38
VDS403A09500 VDS403A09525
93.38 93.38
VDS403A09600 VDS403A09700
93.38 93.38
VDS403A09800 VDS403A09900
93.38 93.38
mm 6,528 6,600
in .2570 .2598
L 105 105
6,630 6,700
.2610 .2638
105 105
6,746 6,800
.2656 .2677
105 105
6,900 7,000
.2717 .2756
105 105
7,100 7,145
.2795 .2813
110 110
7,200 7,300
.2835 .2874
110 110
7,400 7,500
.2913 .2953
110 110
7,541 7,600
.2969 .2992
110 110
7,700 7,800
.3031 .3071
110 110
7,900 7,938
.3110 .3125
110 110
8,000 8,100
.3150 .3189
110 122
8,200 8,300
.3228 .3268
122 122
8,334 8,400
.3281 .3307
122 122
8,433 8,500
.3320 .3346
122 122
8,600 8,700
.3386 .3425
122 122
8,733 8,800
.3438 .3465
122 122
8,900 9,000
.3504 .3543
122 122
9,100 9,129
.3583 .3594
122 122
9,200 9,300
.3622 .3661
122 122
9,347 9,400
.3680 .3701
122 122
9,500 9,525
.3740 .3750
122 122
9,600 9,700
.3780 .3819
122 122
9,800 9,900
.3858 .3898
122 122
L4 max 57 57
L5 1,1 1,1
LS 36 36
57 57
1,1 1,1
36 36
57 57
1,1 1,1
36 36
57 57
1,2 1,2
36 36
61 61
1,2 1,2
36 36
61 61
1,2 1,2
36 36
61 61
1,3 1,3
36 36
61 61
1,3 1,3
36 36
61 61
1,3 1,3
36 36
61 61
1,3 1,3
36 36
61 68
1,4 1,4
36 40
8 10
68 68
1,4 1,4
40 40
10 10
68 68
1,4 1,4
40 40
10 10
68 68
1,4 1,4
40 40
10 10
68 68
1,5 1,5
40 40
10 10
68 68
1,5 1,5
40 40
10 10
68 68
1,5 1,5
40 40
10 10
68 68
1,5 1,6
40 40
10 10
68 68
1,6 1,6
40 40
10 10
68 68
1,6 1,6
40 40
10 10
68 68
1,6 1,6
40 40
10 10
68 68
1,6 1,7
40 40
10 10
68 68
1,7 1,7
40 40
10 10
D 8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
8 8
(continued)
30
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 30
WWW.WIDIA.COM
2/11/15 11:31 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D ™
(VDS403A • 8 x D continued)
D1 diameter VDS403A • WU25PD VDS403A09921 VDS403A10000
£ 93.38 93.38
mm 9,921 10,000
in .3906 .3937
L 122 122
VDS403A10100 VDS403A10200
108.75 108.75
10,100 10,200
.3976 .4016
141 141
VDS403A10300 VDS403A10320
108.75 108.75
10,300 10,320
.4055 .4063
141 141
VDS403A10400 VDS403A10500
108.75 108.75
10,400 10,500
.4094 .4134
141 141
VDS403A10600 VDS403A10700
108.75 108.75
10,600 10,700
.4173 .4213
141 141
VDS403A10716 VDS403A10800
108.75 108.75
10,716 10,800
.4219 .4252
141 141
VDS403A10900 VDS403A11000
108.75 108.75
10,900 11,000
.4291 .4331
141 141
VDS403A11100 VDS403A11113
113.63 113.63
11,100 11,113
.4370 .4375
141 141
VDS403A11200 VDS403A11300
113.63 113.63
11,200 11,300
.4409 .4449
141 141
VDS403A11400 VDS403A11500
113.63 113.63
11,400 11,500
.4488 .4528
141 141
VDS403A11509 VDS403A11600
113.63 113.63
11,509 11,600
.4531 .4567
141 141
VDS403A11700 VDS403A11800
113.63 113.63
11,700 11,800
.4606 .4646
141 141
VDS403A11900 VDS403A11908
113.63 113.63
11,900 11,908
.4685 .4688
141 141
VDS403A12000 VDS403A12100
113.63 153.00
12,000 12,100
.4724 .4764
141 155
VDS403A12200 VDS403A12300
153.00 153.00
12,200 12,300
.4803 .4843
155 155
VDS403A12304 VDS403A12400
153.00 153.00
12,304 12,400
.4844 .4882
155 155
VDS403A12500 VDS403A12600
153.00 153.00
12,500 12,600
.4921 .4961
155 155
VDS403A12700 VDS403A12800
153.00 153.00
12,700 12,800
.5000 .5039
155 155
VDS403A12900 VDS403A13000
153.00 153.00
12,900 13,000
.5079 .5118
155 155
VDS403A13096 VDS403A13100
157.50 157.50
13,096 13,100
.5156 .5157
155 155
VDS403A13200 VDS403A13300
157.50 157.50
13,200 13,300
.5197 .5236
155 155
VDS403A13400 VDS403A13500
157.50 157.50
13,400 13,500
.5276 .5315
155 155
VDS403A13600 VDS403A13700
157.50 157.50
13,600 13,700
.5354 .5394
155 155
L4 max 68 68
L5 1,7 1,7
LS 40 40
D 10 10
79 79
1,7 1,7
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,8 1,8
45 45
12 12
79 79
1,9 1,9
45 45
12 12
79 79
1,9 1,9
45 45
12 12
79 79
1,9 1,9
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 79
2,0 2,0
45 45
12 12
79 91
2,1 2,1
45 45
12 14
91 91
2,1 2,1
45 45
14 14
91 91
2,1 2,1
45 45
14 14
91 91
2,1 2,2
45 45
14 14
91 91
2,2 2,2
45 45
14 14
91 91
2,2 2,2
45 45
14 14
91 91
2,3 2,3
45 45
14 14
91 91
2,3 2,3
45 45
14 14
91 91
2,3 2,3
45 45
14 14
91 91
2,3 2,4
45 45
14 14
(continued)
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 31
31
2/11/15 11:31 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D (VDS403A • 8 x D continued)
VDS403A • WU25PD VDS403A13800 VDS403A13891
£ 157.50 157.50
D1 diameter mm in 13,800 .5433 13,891 .5469
L 155 155
VDS403A13900 VDS403A14000
157.50 157.50
13,900 14,000
.5472 .5512
155 155
VDS403A14100 VDS403A14200
176.63 176.63
14,100 14,200
.5551 .5591
VDS403A14288 VDS403A14300
176.63 176.63
14,288 14,300
VDS403A14400 VDS403A14500
176.63 176.63
VDS403A14600 VDS403A14684
L4 max 91 91
L5 2,4 2,4
LS 45 45
D 14 14
91 91
2,4 2,4
45 45
14 14
171 171
101 101
2,4 2,5
48 48
16 16
.5625 .5630
171 171
101 101
2,5 2,5
48 48
16 16
14,400 14,500
.5669 .5709
171 171
101 101
2,5 2,5
48 48
16 16
176.63 176.63
14,600 14,684
.5748 .5781
171 171
101 101
2,5 2,5
48 48
16 16
VDS403A14700 VDS403A14800
176.63 176.63
14,700 14,800
.5787 .5827
171 171
101 101
2,5 2,6
48 48
16 16
VDS403A14900 VDS403A15000
176.63 176.63
14,900 15,000
.5866 .5906
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15083 VDS403A15100
206.25 206.25
15,083 15,100
.5938 .5945
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15200 VDS403A15300
206.25 206.25
15,200 15,300
.5984 .6024
171 171
101 101
2,6 2,6
48 48
16 16
VDS403A15400 VDS403A15479
206.25 206.25
15,400 15,479
.6063 .6094
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15500 VDS403A15600
206.25 206.25
15,500 15,600
.6102 .6142
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15700 VDS403A15800
206.25 206.25
15,700 15,800
.6181 .6220
171 171
101 101
2,7 2,7
48 48
16 16
VDS403A15875 VDS403A15900
206.25 206.25
15,875 15,900
.6250 .6260
171 171
101 101
2,7 2,8
48 48
16 16
VDS403A16000 VDS403A16100
206.25 240.00
16,000 16,100
.6299 .6339
171 185
101 113
2,8 2,8
48 48
16 18
VDS403A16200 VDS403A16271
240.00 240.00
16,200 16,271
.6378 .6406
185 185
113 113
2,8 2,8
48 48
18 18
VDS403A16300 VDS403A16400
240.00 240.00
16,300 16,400
.6417 .6457
185 185
113 113
2,8 2,8
48 48
18 18
VDS403A16500 VDS403A16600
240.00 240.00
16,500 16,600
.6496 .6535
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A16670 VDS403A16700
240.00 240.00
16,670 16,700
.6563 .6575
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A16800 VDS403A16900
240.00 240.00
16,800 16,900
.6614 .6654
185 185
113 113
2,9 2,9
48 48
18 18
VDS403A17000 VDS403A17100
240.00 288.38
17,000 17,100
.6693 .6732
185 185
113 113
2,9 3,0
48 48
18 18
VDS403A17200 VDS403A17300
288.38 288.38
17,200 17,300
.6772 .6811
185 185
113 113
3,0 3,0
48 48
18 18
VDS403A17400 VDS403A17463
288.38 288.38
17,400 17,463
.6850 .6875
185 185
113 113
3,0 3,0
48 48
18 18
(continued)
32
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 32
WWW.WIDIA.COM
2/11/15 11:31 AM
Solid Carbide Drills VariDrill • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D ™
(VDS403A • 8 x D continued)
VDS403A • WU25PD VDS403A17500 VDS403A17600
£ 288.38 288.38
D1 diameter mm in 17,500 .6890 17,600 .6929
L 185 185
L4 max 113 113
L5 3,0 3,1
LS 48 48
D 18 18
VDS403A17700 VDS403A17800
288.38 288.38
17,700 17,800
.6969 .7008
185 185
113 113
3,1 3,1
48 48
18 18
VDS403A17859 VDS403A17900
288.38 288.38
17,859 17,900
.7031 .7047
185 185
113 113
3,1 3,1
48 48
18 18
VDS403A18000 VDS403A18100
288.38 312.75
18,000 18,100
.7087 .7126
185 200
113 124
3,1 3,1
48 50
18 20
VDS403A18200 VDS403A18258
312.75 312.75
18,200 18,258
.7165 .7188
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18300 VDS403A18400
312.75 312.75
18,300 18,400
.7205 .7244
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18500 VDS403A18600
312.75 312.75
18,500 18,600
.7283 .7323
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18654 VDS403A18700
312.75 312.75
18,654 18,700
.7344 .7362
200 200
124 124
3,2 3,2
50 50
20 20
VDS403A18800 VDS403A18900
312.75 312.75
18,800 18,900
.7402 .7441
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19000 VDS403A19050
312.75 336.75
19,000 19,050
.7480 .7500
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19100 VDS403A19200
336.75 336.75
19,100 19,200
.7520 .7559
200 200
124 124
3,3 3,3
50 50
20 20
VDS403A19300 VDS403A19400
336.75 336.75
19,300 19,400
.7598 .7638
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19500 VDS403A19600
336.75 336.75
19,500 19,600
.7677 .7717
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19700 VDS403A19800
336.75 336.75
19,700 19,800
.7756 .7795
200 200
124 124
3,4 3,4
50 50
20 20
VDS403A19900 VDS403A20000
336.75 336.75
19,900 20,000
.7835 .7874
200 200
124 124
3,5 3,5
50 50
20 20
NOTE: L4 max, L5, L, LS, and D table columns reflect millimetre measurements.
Tolerance Nominal Size Range
D1 Tolerance
D Tolerance h6
1–3
0,000/-0,014 (h8)
0,000/-0,006
>3–6
0,000/-0,012 (h7)
0,000/-0,008
>6–10
0,000/-0,015 (h7)
0,000/-0,009
>10–18 >18–20
0,000/-0,018 (h7) 0,000/-0,021 (h7)
0,000/-0,011 0,000/-0,013
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 33
33
2/11/15 11:31 AM
Solid Carbide Drills VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • Speed and Feed Charts VariDrill • VDS2_ Series • WU25PD • Flood Coolant • Metric
Cutting Speed — vc Range — m/min
P
M
K
N
S
Group 1 2, 3, 4, 6, 7 5, 9, 10, 11 12, 13 14.1 14.3 14.2, 14.4 15, 16 17, 18, 19 20 21 22, 23, 24 25 26, 27, 28 31, 32 33, 34, 35 36 37
min 60 50 50 30 30 40 30 70 90 80 90 90 90 90 20 10 20 20
– – – – – – – – – – – – – – – – – –
max 100 90 100 60 50 60 50 150 120 120 270 270 225 270 30 30 40 50
Recommended Feed Rate (fz) Tool Diameter mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r
1,0 0,04 – 0,09 0,05 – 0,10 0,05 – 0,10 0,03 – 0,05 0,02 – 0,05 0,02 – 0,06 0,02 – 0,05 0,06 – 0,13 0,08 – 0,11 0,04 – 0,10 0,05 – 0,12 0,04 – 0,08 0,10 – 0,13 0,04 – 0,08 0,01 – 0,04 0,01 – 0,03 0,01 – 0,03 0,01 – 0,03
2,0 0,05 – 0,12 0,06 – 0,13 0,06 – 0,13 0,04 – 0,06 0,03 – 0,06 0,03 – 0,07 0,03 – 0,06 0,07 – 0,14 0,09 – 0,12 0,06 – 0,12 0,06 – 0,13 0,06 – 0,12 0,11 – 0,14 0,06 – 0,12 0,02 – 0,05 0,02 – 0,03 0,02 – 0,03 0,02 – 0,03
3,0 0,07 – 0,14 0,08 – 0,15 0,07 – 0,15 0,05 – 0,08 0,04 – 0,07 0,04 – 0,08 0,04 – 0,07 0,09 – 0,18 0,10 – 0,13 0,06 – 0,14 0,08 – 0,14 0,08 – 0,16 0,12 – 0,14 0,08 – 0,16 0,03 – 0,06 0,02 – 0,04 0,02 – 0,04 0,02 – 0,04
4,0 0,08 – 0,16 0,09 – 0,17 0,08 – 0,17 0,06 – 0,10 0,05 – 0,09 0,06 – 0,10 0,06 – 0,09 0,10 – 0,19 0,10 – 0,15 0,07 – 0,15 0,10 – 0,16 0,10 – 0,20 0,13 – 0,16 0,10 – 0,20 0,04 – 0,08 0,03 – 0,06 0,02 – 0,05 0,03 – 0,06
6,0 0,11 – 0,22 0,13 – 0,23 0,12 – 0,23 0,08 – 0,14 0,08 – 0,11 0,08 – 0,12 0,08 – 0,11 0,13 – 0,25 0,13 – 0,20 0,10 – 0,20 0,12 – 0,20 0,12 – 0,24 0,14 – 0,20 0,12 – 0,24 0,06 – 0,10 0,05 – 0,08 0,04 – 0,07 0,05 – 0,08
8,0 0,13 – 0,26 0,15 – 0,28 0,14 – 0,28 0,10 – 0,18 0,09 – 0,12 0,09 – 0,14 0,09 – 0,12 0,16 – 0,30 0,16 – 0,25 0,11 – 0,24 0,16 – 0,24 0,16 – 0,28 0,16 – 0,24 0,16 – 0,28 0,08 – 0,12 0,07 – 0,10 0,06 – 0,09 0,07 – 0,10
10,0 0,15 – 0,31 0,19 – 0,33 0,17 – 0,33 0,13 – 0,22 0,10 – 0,14 0,10 – 0,16 0,10 – 0,14 0,18 – 0,35 0,18 – 0,29 0,14 – 0,28 0,20 – 0,28 0,20 – 0,32 0,20 – 0,28 0,20 – 0,32 0,09 – 0,13 0,08 – 0,11 0,07 – 0,10 0,08 – 0,11
12,0 0,18 – 0,35 0,22 – 0,38 0,19 – 0,38 0,14 – 0,24 0,12 – 0,16 0,12 – 0,18 0,12 – 0,16 0,20 – 0,39 0,20 – 0,32 0,15 – 0,32 0,24 – 0,32 0,24 – 0,36 0,24 – 0,32 0,24 – 0,36 0,10 – 0,14 0,09 – 0,12 0,08 – 0,11 0,09 – 0,12
16,0 0,22 – 0,42 0,26 – 0,47 0,23 – 0,47 0,18 – 0,32 0,14 – 0,18 0,14 – 0,20 0,14 – 0,18 0,25 – 0,48 0,25 – 0,38 0,19 – 0,38 0,28 – 0,40 0,28 – 0,44 0,28 – 0,40 0,28 – 0,40 0,12 – 0,16 0,10 – 0,14 0,09 – 0,13 0,10 – 0,14
20,0 0,28 – 0,54 0,34 – 0,59 0,29 – 0,59 0,23 – 0,41 0,16 – 0,20 0,16 – 0,22 0,16 – 0,20 0,30 – 0,59 0,30 – 0,48 0,24 – 0,48 0,32 – 0,48 0,32 – 0,52 0,32 – 0,44 0,32 – 0,48 0,14 – 0,18 0,11 – 0,16 0,10 – 0,15 0,11 – 0,16
10,0 0,15 – 0,31 0,19 – 0,33 0,17 – 0,33 0,13 – 0,22 0,10 – 0,14 0,10 – 0,16 0,10 – 0,14 0,21 – 0,40 0,21 – 0,32 0,15 – 0,32 0,20 – 0,28 0,20 – 0,32 0,20 – 0,28 0,20 – 0,32 0,09 – 0,13 0,08 – 0,11 0,07 – 0,10 0,08 – 0,11
12,0 0,18 – 0,35 0,22 – 0,38 0,19 – 0,38 0,14 – 0,24 0,12 – 0,16 0,12 – 0,18 0,12 – 0,16 0,23 – 0,44 0,23 – 0,36 0,17 – 0,36 0,24 – 0,32 0,24 – 0,36 0,24 – 0,32 0,24 – 0,36 0,10 – 0,14 0,09 – 0,12 0,08 – 0,11 0,09 – 0,12
16,0 0,22 – 0,42 0,26 – 0,47 0,23 – 0,47 0,18 – 0,32 0,14 – 0,18 0,14 – 0,20 0,14 – 0,18 0,28 – 0,54 0,28 – 0,43 0,22 – 0,43 0,28 – 0,40 0,28 – 0,44 0,28 – 0,40 0,28 – 0,40 0,12 – 0,16 0,10 – 0,14 0,09 – 0,13 0,10 – 0,14
20,0 0,28 – 0,54 0,34 – 0,59 0,29 – 0,59 0,23 – 0,41 0,16 – 0,20 0,16 – 0,22 0,16 – 0,20 0,34 – 0,67 0,34 – 0,54 0,27 – 0,54 0,32 – 0,48 0,32 – 0,52 0,32 – 0,44 0,32 – 0,48 0,14 – 0,18 0,11 – 0,16 0,10 – 0,15 0,11 – 0,16
VariDrill • VDS4_ Series • WU25PD • Through Coolant • Metric
Cutting Speed – vc Range – m/min
P
M
K
N
S
Group 1 2, 3, 4, 6, 7 5, 9, 10, 11 12, 13 14.1 14.3 14.2, 14.4 15, 16 17, 18, 19 20 21 22, 23, 24 25 26, 27, 28 31, 32 33, 34, 35 36 37
min 70 60 50 40 30 40 30 80 90 80 90 90 90 90 20 10 10 10
– – – – – – – – – – – – – – – – – –
max 140 100 100 70 50 60 50 160 140 130 315 270 270 270 30 30 40 40
Recommended Feed Rate (fz) Tool Diameter mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r mm/r
34
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 34
1,0 0,04 – 0,09 0,05 – 0,10 0,05 – 0,10 0,03 – 0,05 0,02 – 0,05 0,02 – 0,06 0,02 – 0,05 0,07 – 0,14 0,09 – 0,13 0,05 – 0,12 0,05 – 0,12 0,04 – 0,08 0,10 – 0,13 0,04 – 0,08 0,01 – 0,04 0,01 – 0,03 0,01 – 0,03 0,01 – 0,03
2,0 0,05 – 0,12 0,06 – 0,13 0,06 – 0,13 0,04 – 0,06 0,03 – 0,06 0,03 – 0,07 0,03 – 0,06 0,08 – 0,15 0,10 – 0,14 0,06 – 0,14 0,06 – 0,13 0,06 – 0,12 0,11 – 0,14 0,06 – 0,12 0,02 – 0,05 0,02 – 0,03 0,02 – 0,03 0,02 – 0,03
3,0 0,07 – 0,14 0,08 – 0,15 0,07 – 0,15 0,05 – 0,08 0,04 – 0,07 0,04 – 0,08 0,04 – 0,07 0,10 – 0,20 0,11 – 0,14 0,07 – 0,15 0,08 – 0,14 0,08 – 0,16 0,12 – 0,14 0,08 – 0,16 0,03 – 0,06 0,02 – 0,04 0,02 – 0,04 0,02 – 0,04
4,0 0,08 – 0,16 0,09 – 0,17 0,08 – 0,17 0,06 – 0,10 0,05 – 0,09 0,06 – 0,10 0,06 – 0,09 0,11 – 0,22 0,12 – 0,17 0,08 – 0,17 0,10 – 0,16 0,10 – 0,20 0,13 – 0,16 0,10 – 0,20 0,04 – 0,08 0,03 – 0,06 0,02 – 0,05 0,03 – 0,06
6,0 0,11 – 0,22 0,13 – 0,23 0,12 – 0,23 0,08 – 0,14 0,08 – 0,11 0,08 – 0,12 0,08 – 0,11 0,14 – 0,28 0,14 – 0,23 0,11 – 0,23 0,12 – 0,20 0,12 – 0,24 0,14 – 0,20 0,12 – 0,24 0,06 – 0,10 0,05 – 0,08 0,04 – 0,07 0,05 – 0,08
8,0 0,13 – 0,26 0,15 – 0,28 0,14 – 0,28 0,10 – 0,18 0,09 – 0,12 0,09 – 0,14 0,09 – 0,12 0,18 – 0,34 0,18 – 0,28 0,13 – 0,27 0,16 – 0,24 0,16 – 0,28 0,16 – 0,24 0,16 – 0,28 0,08 – 0,12 0,07 – 0,10 0,06 – 0,09 0,07 – 0,10
WWW.WIDIA.COM
2/11/15 11:31 AM
Informational Icons Guide Application Icons Face Milling
Pocketing
Counter Sinking/ Stroke Chamfering
Drilling
Shoulder Milling: Square End
Shoulder Milling: Ball/Bull Nose
Reaming: Through Hole
Drilling: Inclined Entry
Ramping
Helical Milling
Reaming: Blind Hole
Drilling: Inclined Exit
3D Profiling
Slotting: Ball/Bull Nose
Reaming: Through and Cross Hole
Drilling: Stacked Plates
Slotting: Square End
Slotting: Side
Reaming: Blind and Cross Hole
Drilling: Convex
Slotting: T-Slot
Chamfer Milling
Geometry Icons Shank: Plain
Shank: SN Shank
Shank: Weldon: 2Flat
Shank: SK Shank (Rübig™)
Shank: Plain ≤H6
Shank: Shell Mill Shank
Shank: Flat
Shank: SSF Shank
Shank: SF Shank
Shank: Weldon®
Shank: Screw–On
Shank: KM™ Shank
Tool Dimensions: 2Flute/2Margin/ coolant
Tool Dimensions: 2Flute/4Margin/ no coolant
Through Coolant: Radial: Drilling
Through Coolant: Axial: Drilling
Tool Dimensions: 2Flute/4Margin/ coolant
DIN Number: 6537
Flood Coolant: Drilling
Feature Icons
DIN — German Institute for Standardisation
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 35
35
2/11/15 11:31 AM
THE NEXT GENERATION OF WIDIA SOLID CARBIDE DRILLS ™
New Top Drill S™ Solid Carbide Drills for Steel and Cast Iron • Introducing two brand new lines of WIDIA Top Drill S Solid Carbide Drills for high-performance drilling applications. • The TDS for steel and TDS for cast iron have been designed specifically to reduce cost per hole by increasing metal removal rate (MRR) and tool life. • Due to their application specific design, the TDS for steel and TDS for cast iron are the obvious choices for customers seeking the ultimate in high-performance drilling.
To learn more about our latest tooling advances, contact your local Authorised Distributor or visit www.widia.com.
36
A-13-03523EN_me_WIDIA_SlimLine_Catalog_28-36.indd 36
2/11/15 11:31 AM
Metalcutting Safety IMPORTANT SAFETY INSTRUCTIONS Read before using the tools in this catalogue! Projectile and Fragmentation Hazards Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse. To avoid injury: • Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby. • Always make sure all machine guards are in place.
Breathing and Skin Contact Hazards: Grinding carbide or other advanced cutting tool materials produce dust or mist containing metallic particles. Breathing this dust or mist — especially over an extended period — can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse. To avoid injury: • Always wear breathing protection and safety goggles when grinding. • Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding. • Avoid skin contact with dust or mist. For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalogue and recommendations on machining practices may not apply to your particular operation. For more information, consult Kennametal’s Metalcutting Safety booklet, available free from Kennametal at 724.539.5747 or fax 724.539.5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724.539.5066 or fax 724.539.5372.
WIDIA, AluSurf, KM, NINA, Rübig, Top Drill S, VariDrill, VariMill, and WU25PD are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual property rights concerning that name or logo. Weldon® is a registered trademark of Weldon Tool Company. ©Copyright 2015 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.
A-13-03523EN_me_WIDIA_SlimLine_Covers_SinglePages.indd 4
2/11/15 11:32 AM
WIDIA™ Slim Line ITC Ltd Cyber House, 1 Kepler, Lichfield Road Industrial Est, Tamworth B79 7XE Telephone: +44 (0) 1827 304500 Fax: +44 (0) 1827 304501 E-mail: sales@itc-ltd.co.uk www.itc-ltd.co.uk Find us on:
Distributed by:
©2015 Kennametal Inc. All rights reserved. A-13-03523EN_me
WWW.WIDIA.COM
A-13-03523EN_me_WIDIA_SlimLine_Covers_SinglePages.indd 1
2/11/15 11:32 AM