PRODUCT CATALOGUE GENERATORS & PUMPS
CONTENTS
TRADE SERIES GENERATORS
201
CONSTRUCTION SERIES GENERATORS
202
HONDA POWERED GENERATORS
203
PETROL POWERED WATER PUMPS
204
VIEW THE FULL RANGE OF ITM PRODUCTS AT www.itmtools.com.au
PRODUCT CATALOGUE SEPTEMBER 2021
Magnetic Base Drilling Machines Cutting Tools
TRADE SERIES GENERATORS • A.V.R (Automatic Voltage Regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a T.H.D. (Total Harmonic Distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.
• • • • •
2.8KVA 6HP GENERATOR
6.8KVA 13HP GENERATOR
• 2300 Max Watts • 2000 Rated Watts • 2x 15A Outlet
• 5500 Max Watts • 5000 Rated Watts • 2x 15A Outlet
Powerful 4 stroke OHV engines Low oil sensor Digital multimeter display Large capacity fuel tanks 2-year trade warranty
SINE WAVE TECHNOLOGY
2
T.H.D. <5%
TRADE WARRANTY
Brushware
YEAR
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
TM510-2300 75dB 15L 19 Hours Recoil No 41kg
Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
3.5KVA 7HP GENERATOR
8.1KVA 15HP GENERATOR
• 2800 Max Watts • 2500 Rated Watts • 2x 15A Outlet
• 6500 Max Watts • 6000 Rated Watts • 2x 15A Outlet
TM510-5500 78dB 25L
Metal Cutting Saws
13 Hours Electric Yes
Drilling Machines
81kg
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears
Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
TM510-2800 75dB 15L 16 Hours Recoil No 44kg
Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
4KVA 8HP GENERATOR
10KVA 17HP GENERATOR
• 3400 Max Watts • 3200 Rated Watts • 2x 15A Outlet
• 8000 Max Watts • 7500 Rated Watts • 2 x 15A Outlet
TM510-6500 79dB 25L
Fans & Ventilators
12 Hours Electric Yes
Workshop Storage
85kg
Generators & Pumps
Air Compressors
Pneumatic Products
M7 Air Tools Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
www.itmtools.com.au
TM510-3400 76dB 15L 14 Hours Electric No 52kg
Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
TM510-8000 80dB 25L
Impact Sockets
10 Hours Electric Yes 95kg
NPK Air Tools
201
Magnetic Base Drilling Machines Cutting Tools
CONSTRUCTION SERIES GENERATORS
Brushware
• The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered
Hand Tools
• All models come complete with a heavy-duty handle and wheel kit, IP66 rated power outlets and R.C.D. (Residual Current Device), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power
RCD
SINE WAVE TECHNOLOGY
RESIDUAL CURRENT DEVICE
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines Metal Cutting Saws
• • • • • • •
Powerful 4 stroke OHV engines Low oil sensor Digital multimeter display Large capacity fuel tanks 2-year trade warranty A.V.R. (Automatic Voltage Regulator) T.H.D. (Total Harmonic Distortion) of <5%
T.H.D. <5%
2
IP66
WEATHER PROOF
YEAR TRADE WARRANTY
4KVA 8HP GENERATOR
8.1KVA 15HP GENERATOR
• 3400 Max Watts • 3200 Rated Watts • 1 x IP66 15A Outlet
• 6500 Max Watts • 6000 Rated Watts • 2 x IP66 15A Outlet
Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages
Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load
Punches & Shears
Starting System Handle & Wheel Kit Net Weight
Fans & Ventilators
Workshop Storage
TM520-3400 76dB 15L 14 Hours Electric w/ Remote Yes 54kg
Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
6.8KVA 13HP GENERATOR
10KVA 17HP GENERATOR
• 5500 Max Watts • 5000 Rated Watts • 2 x IP66 15A Outlet
• 8000 Max Watts • 7500 Rated Watts • 2 x IP66 15A Outlet
TM520-6500 79dB 25L 12 Hours Electric w/ Remote Yes 88kg
Generators & Pumps
Air Compressors
Pneumatic Products
M7 Air Tools Part No.
Impact Sockets
Noise @ 7m Full Load Fuel Tank Running Time - 50% load
NPK Air Tools
202
Starting System Handle & Wheel Kit Net Weight
TM520-5500 78dB 25L 13 Hours Electric w/ Remote Yes 83kg
Part No. Noise @ 7m Full Load Fuel Tank Running Time - 50% load Starting System Handle & Wheel Kit Net Weight
TM520-8000 80dB 25L 10 Hours Electric w/ Remote Yes 95kg
www.itmtools.com.au
Magnetic Base Drilling Machines Cutting Tools
CONSTRUCTION SERIES GENERATORS • High-quality Honda powered engines • All models come complete with, IP66 rated power outlets and R.C.D. (Residual Current Device), the Construction Series Generators are perfect for the professional tradesman needing a tough yet reliable source of power • Powerful 4 stroke O.H.V. engines • Low oil sensor • 2-year trade warranty • A.V.R. (Automatic Voltage Regulator)
Brushware
RCD RESIDUAL CURRENT DEVICE
IP66
WEATHER PROOF
3.75KVA 6.5HP GENERATOR
7.5KVA 13HP GENERATOR
• 3000 Max Watts • 2800 Rated Watts • 1 x IP66 15A Outlet
• • • •
3
2
YEAR HONDA ENGINE LIMITED WARRANTY
YEAR TRADE WARRANTY
Hand Tools
Clamps & Vices
6000 Max Watts 5500 Rated Watts 2 x IP66 15A Outlet Digital multimeter display • Large capacity fuel tank • Heavy-duty wheel & handle kit
Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws Drilling Machines
TM522-3000
Part No. Engine Model
GX200
Engine Model
Engine HP
6.5hp
Engine HP
Fuel Tank
3.6L
Fuel Tank
Running Time
4.5 Hours
Handle & Wheel Kit
No
Net Weight
47kg
TM522-6000
Part No.
GX390 13hp 25L
Running Time
13 Hours
Handle & Wheel Kit
Yes
Net Weight
80kg
It is crucial that you choose the right generator based on the total amount of Watts required to run the appliances you intend to run off your new ITM generator. The chart below is a guide to the most commonly used appliances and their average power. Please note this is a guide only and if you are unsure or require any additional information on your ITM generator, you contact your nearest ITM stockist.
1.
2.
3.
4.
Identify the products or tools that you plan to operate with your generator
Calculate the required power for each product allowing for the start up load
Add up the wattage for all of the products you plan to run simultaneously
Choose a generator with enough rated output of at least the total plus, an additional 10%
Standard L.E.D. Globe
WATTAGE REQUIRED
MY CALCULATED POWER REQUIRED
MODEL NUMBER
MAXIMUM WATTS
RATED WATTS
TM510-2300
2,300
2,000
400
TM510-2800
2,800
2,500
Fridge
300 - 800
TM510-3400
3,400
3,200
Heater
800 - 1,200
TM510-5500
5,500
5,000
Microwave
1,000 - 1,400
TM510-6500
6,500
6,000
Air Conditioner 13,500 BTU
1,200 - 2,300
Welder 230A AC At 100Amp
4,000 - 6,000
TM520-3400
3,400
3,200
Power Saw
1,800 - 2,400
TM520-5500
5,500
5,000
600 - 1,000
TM520-6500
6,500
6,000
Drill Pedestal Workshop
1,200 - 2,000
TM520-8000
8,000
7,500
Air Compressor
2,000 - 3,000
TM522-3000
3,000
2,800
1hp Motor Capacitor Run
1,000 - 2,400
TM522-6000
6,000
5,500
1hp Motor Induction Run
1,000 - 3,000
2hp Motor Capacitor Run
2,000 - 4,000
2hp Motor Induction Run
2,000 - 5,000
Television
Drill Hand held
TOTAL POWER CONSUMPTION
www.itmtools.com.au
Bevelling Machines & Welding Carriages
Fans & Ventilators
Workshop Storage
Generators & Pumps
TRADE SERIES
6 - 10 60 - 120
Laptop Computer
Benders
Punches & Shears
CHOOSING THE RIGHT GENERATOR
USAGE
Grinding Machines
CONSTRUCTION SERIES
Air Compressors
Pneumatic Products
M7 Air Tools
Impact Sockets
NPK Air Tools
203
Magnetic Base Drilling Machines Cutting Tools
Brushware
Hand Tools
WATER PUMPS 50MM PETROL WATER TRANSFER PUMP
50MM PETROL WATER PRESSURE PUMP
• • • •
• • • • •
Powerful 7hp 4 stroke engine Heavy-duty roll cage frame Heavy-duty aluminium pump body 2-year trade warranty
Powerful 7hp 4 stroke engine Heavy-duty roll cage frame Heavy-duty aluminium pump body Twin impeller delivers water higher and further 2-year trade warranty
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines Metal Cutting Saws Part No.
Drilling Machines
Engine HP Inlet / Outlet Size
Grinding Machines
TM530-050
TM530-250
Part No.
7hp
Engine HP
50mm (2")
Inlet / Outlet Size
7hp 1x 50mm (2"), 2x 38mm (1.5")
Maximum Suction Lift
7.5m
Maximum Suction Lift
Maximum Head
32m
Maximum Head
80m
Maximum Flow
28,000 L/Hr (466 L/min)
Maximum Flow
17,000 L/Hr (283 L/min)
Net Weight
25kg
7m
Net Weight
36kg
Benders Bevelling Machines & Welding Carriages Punches & Shears
Fans & Ventilators
7M WATER SUCTION HOSE WITH FITTINGS • • • •
80MM PETROL WATER TRASH PUMP • • • • •
Reinforced clear P.V.C. Includes quick fit camlock fitting and threaded adaptor Inlet strainer basket included 50mm (2") Diameter
Powerful 7hp 4 stroke engine Heavy-duty powder coated roll cage frame Heavy-duty aluminium pump body Twin impeller delivers water higher and further 2-year trade warranty
Workshop Storage
TM533-007
Part No. Length
Generators & Pumps
Air Compressors
• • • • Part No. Engine HP Inlet / Outlet Size Maximum Suction Lift
Impact Sockets
Maximum Head Maximum Particle Size Maximum Flow Net Weight
NPK Air Tools
204
50mm (2")
20M LAY FLAT WATER HOSE WITH FITTINGS
Pneumatic Products
M7 Air Tools
7m
Diameter
U.V. Resistant and anti-stretch P.V.C. material Includes quick fit camlock fittings and threaded adaptor 50mm (2") Diameter 58psi Maximum pressure rating
TM530-080 7hp 80mm 7.5m 25m 25mm 60,000 L/Hr (1000 L/min) 37kg
Part No. Length Diameter
TM533-020 20m 50mm (2")
www.itmtools.com.au
Magnetic Base Drilling Machines Cutting Tools
WATER PUMPS
3
2
YEAR
YEAR
HONDA ENGINE LIMITED WARRANTY
50MM PETROL WATER TRANSFER PUMP
80MM PETROL WATER TRANSFER PUMP
• • • • •
• • • • • •
Powered by Honda GX160 5.5hp 4 stroke engine Heavy-duty roll cage frame Heavy-duty pump body 3-year Honda engine limited warranty 2-year trade warranty on pump
Brushware
TRADE WARRANTY
Hand Tools
Powered by Honda GX160 5.5hp 4 stroke engine Heavy-duty roll cage frame Heavy-duty pump body Ideal for high volume applications 3-year Honda engine limited warranty 2-year trade warranty on pump
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws Drilling Machines
TM532-050
Part No. Engine HP
5.5hp
Inlet / Outlet Size
50mm (2")
Maximum Suction Lift
7m
Part No. Engine HP Inlet / Outlet Size Maximum Suction Lift
TM532-080 5.5hp 80mm 7m
Maximum Head
32m
Maximum Head
30m
Maximum Flow
35,000 L/Hr (583 L/min)
Maximum Flow
60,000 L/Hr (1000 L/min)
Net Weight
25kg
Net Weight
Grinding Machines
27kg
Benders Bevelling Machines & Welding Carriages
50MM PETROL WATER PRESSURE PUMP
Punches & Shears
• • • • • •
Fans & Ventilators
Powered by Honda GX200 6.5hp 4 stroke engine Heavy-duty roll cage frame Heavy-duty pump body Twin impeller delivers water higher and further 3-year Honda engine limited warranty 2-year trade warranty on pump
Workshop Storage
Generators & Pumps
Air Compressors
Pneumatic Products
Part No. Engine HP Inlet Size Outlet Size Maximum Suction Lift
TM532-250 6.5hp 50mm (2") 1x 50mm (2"), 2x 38mm (1.5") 75m
Maximum Flow
21,000 L/Hr (350 L/min)
www.itmtools.com.au
Impact Sockets
7m
Maximum Head Net Weight
M7 Air Tools
29kg
NPK Air Tools
205
18 BUSINESS ST, YATALA QLD 4207 AUSTRALIA PH: 07 3287 1114 FX 07 3287 1115 sales@industrialtool.com.au www.itmtools.com.au
NATIONAL SALES & DISTRIBUTION LOCATIONS
HEAD OFFICE Sales Office Distribution Warehouse Sales Office Distribution Warehouse Sales Office
Sales Office Sales Office Distribution Warehouse Sales Office Distribution Warehouse
WWW.ITMTOOLS.COM.AU