PRODUCT CATALOGUE MAGNETIC BASE DRILLING MACHINES & ACCESSORIES
CONTENTS
MACHINES - MAGNETIC BASE DRILLS
7
ACCESSORIES - MAGNETIC BASE DRILLS
19
TAPPING SYSTEMS - MAGNETIC BASE DRILLS
22
CUTTING FLUID
23 VIEW THE FULL RANGE OF ITM PRODUCTS AT www.itmtools.com.au
PRODUCT CATALOGUE SEPTEMBER 2021
Magnetic Base Drilling Machines
MAGNETIC BASE DRILLING MACHINES
Cutting Tools
Australia's most comprehensive range of magnetic base drilling machines, cutters and accessories.
Brushware
With our wide range of machine styles, sizes and designs, there is a Holemaker machine to suit every application. • Reliable and durable European made machines • Value for money that far exceeds any other brand on the market • Over 20 different models of magnetic base drilling machines, stocked in Australia! • Over 25 years of product development
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws
MACHINE SELECTION GUIDE Model
Cutter Capacity
Holemaker PRO 35
35mm Diameter 52mm Depth
Holemaker PRO 35 T3
35mm Diameter 52mm Depth
Holemaker PRO 35 PM
35mm Diameter 45mm Depth
Holemaker PRO 35 MS
35mm Diameter 35mm Depth
Holemaker PRO 35 AUTO
35mm Diameter 52mm Depth
Holemaker PRO 36 AD
36mm Diameter 30mm Depth
Holemaker PRO 40 PRO 40 QG
40mm Diameter 52mm Depth
Holemaker PRO 50 PRO 50 QG
Holemaker PRO 50 D
Holemaker PRO 65
52mm Diameter 52mm Depth
52mm Diameter 75mm Depth
65mm Diameter 75mm Depth
Tooling Capacity 16mm Weldon Shank Drill Bit
Morse Weight Stroke Taper
Pg #
11.0kg 70mm
8
Holemaker PRO 110
47mm Drill Bit 110mm Diameter 63mm Countersink #4 MT 31.0kg 214mm 13 110mm Depth M30 Tapping
13.0kg 70mm
9
Holemaker SPECIAL 60
60mm Diameter 75mm Depth
14.0kg 70mm
9
Holemaker SPECIAL 80
80mm Diameter 110mm Depth
13.5kg 70mm
10
Holemaker SPECIAL 110
32mm Drill Bit 110mm Diameter 55mm Countersink #3 MT 25.0kg 225mm 16 110mm Depth M30 Tapping
9.5kg
10
Holemaker SPECIAL 140
47mm Drill Bit 140mm Diameter 80mm Countersink #4 MT 31.0kg 260mm 16 110mm Depth M42 Tapping
40mm Countersink 12mm Weldon Shank Drill Bit
39mm
40mm Countersink
16mm Drill Bit 40mm Countersink
12.5kg 124mm 11
23mm Drill Bit #2 MT 16.5kg 153mm 11 55mm Countersink
23mm Drill Bit #2 MT 16.5kg 153mm 11 55mm Countersink
18mm Drill Bit 55m Countersink
32mm Drill Bit 63mm Countersink #3 MT 27.0kg 214mm 12 M24 Tapping
Pg #
75mm Diameter 110mm Depth
40mm Countersink 16mm Weldon Shank Drill Bit
Morse Weight Stroke Taper
Holemaker PRO 75 PRO 75 SR
40mm Countersink 16mm Weldon Shank Drill Bit
Tooling Capacity
8
40mm Countersink 16mm Weldon Shank Drill Bit
Cutter Capacity
10.0kg 70mm
40mm Countersink 16mm Weldon Shank Drill Bit
Model
17.0kg 95mm
12
Holemaker 35mm Diameter HMP35AD ATEX 25mm Depth
Holemaker HMP45 ATEX
Holemaker TAP 50
45mm Diameter 52mm Depth
Drilling Machines
Grinding Machines
Benders
23mm Drill Bit 50mm Countersink #2 MT 17.0kg 190mm 15 M20 Tapping
Bevelling Machines & Welding Carriages
25mm Drill Bit 55mm Countersink #3 MT 18.0kg 190mm 15 M24 Tapping
Punches & Shears
12mm Weldon Shank Drill Bit
17.0kg 39mm
17
23mm Drill Bit #2 MT 19.0kg 150mm 17 40mm Countersink
55mm Drill Bit 200mm Diameter 80mm Countersink #5 MT 53.0kg 265mm 18 250mm Depth M52 Tapping
52mm Drill Bit Holemaker 200mm Diameter 80mm Countersink #5 MT 130kg PRO 200A ATEX 110mm Depth M52 Tapping
Fans & Ventilators
Workshop Storage
Generators & Pumps
Air Compressors
Pneumatic Products
M7 Air Tools
400mm 18
Impact Sockets
NPK Air Tools
www.itmtools.com.au
7
Magnetic Base Drilling Machines Cutting Tools
HOLEMAKER PRO 35 T3 THIN WORKPIECE MACHINE
HOLEMAKER PRO 35 QUALITY, COMPACT & ROBUST FULLY FEATURED MACHINE
Brushware
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines
Cutters 35mm
Twist Drills 16mm
Cutters 35mm
Speed 350rpm
FEATURES • European made • Solid, robust construction • Lightweight - Only 10kg. Ideal for on-site and overhead tasks. • Maintenance free dual rail slide system provides rigidity and eliminates the need for gib adjustments • Integrated cutter guard system which is easy to use and practical • Smart magnet technology to ensure sufficient magnetic adhesion • Gravity feed, through spindle coolant system • Magnetically attached coolant bottle, which can be easily removed and attached to the workpiece, allowing coolant feed whilst drilling in horizontal applications • The feed handles can be placed on either the left or right hand side • Supplied in a blow mould plastic carry case
Twist Drills 16mm
Speed 350rpm
FEATURES • All of the features of the standard Pro 35 machine, with the addition of a new highly advanced T3 magnet, allowing minimum material thickness of 3mm • Quality, compact & robust European made machine • Gravity feed coolant system with magnetically attached bottle • Integrated cutter guard for increased user safety • Supplied in a blow mould plastic carry case
Metal Cutting Saws Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears
WRT-0440-06-20-04-4
17 9
OPTIONAL ACCESSORIES & CONSUMABLES
OPTIONAL ACCESSORIES & CONSUMABLES
Fans & Ventilators Holemaker Cutters - pg. 25 314
Holemaker Cutters - pg. 25 38,2
Workshop Storage Weldon Shank Drills - pg. 37
Generators & Pumps
0
Part No.
Air Compressors
Pneumatic Products
M7 Air Tools
10
HMPRO35
33
Part No.
200 293
Weldon Shank Drills - pg. 37
HMPRO35-T3
Capacity (Diameter)
35mm
Capacity (Diameter)
35mm
Capacity (Depth)
52mm
Capacity (Depth)
52mm
16mm
Capacity (Weldon Shank Twist Drills)
16mm
Capacity (Weldon Shank Twist Drills) Motor Power Input Power
920 Watt 1000 Watt Single Phase 240V
Motor Power Input Power
Speed
350rpm
Speed
Weight
10.0kg
Weight
Magnetic Dead Lift Stroke Height (Min. / Max.)
9500Nm On 25mm Steel Plate 70mm 306 / 376mm
Magnetic Dead Lift Stroke Height (Min. / Max.)
920 Watt 1000 Watt Single Phase 240V 350rpm 11.0kg 9000Nm On 25mm Steel Plate 70mm 314 / 384mm
Impact Sockets
NPK Air Tools
8
www.itmtools.com.au
Magnetic Base Drilling Machines
HOLEMAKER PRO 35 MS PIPE DRILLING MACHINE
HOLEMAKER PRO 35 PM PERMANENT MAGNET (RARE EARTH) MAGNETIC BASE DRILLING MACHINE
Cutting Tools
Brushware
Cutters 35mm
Twist Drills 16mm
Cutters 35mm
Speed 350rpm
FEATURES • All of the features of the standard Pro 35 machine, with the addition of a permanent rare earth magnet (not electro magnet) • Increased safety as machine cannot fall or break away from job if power is lost, due to the permanent rare earth magnetic base • This machine is ideally suited to sites or applications where increased safety is required • Integrated cutter guard for increased user safety • Supplied in a blow mould plastic carry case
Twist Drills 16mm
Speed 350rpm
FEATURES • All of the features of the standard Pro 35 machine, with the addition of 4x permanent rare earth magnets allow for external drilling of pipe minimum diameter 300mm or internal drilling of pipe minimum diameter 1000mm • Quality, compact & robust European made machine • Gravity feed coolant system with magnetically attached bottle • Integrated cutter guard for increased user safety • Supplied in a metal carry case
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages WRT-0440-06-20-05-4
WRT-0440-06-20-06-4
17
8
OPTIONAL ACCESSORIES & CONSUMABLES
OPTIONAL ACCESSORIES & CONSUMABLES
Punches & Shears
Holemaker Cutters - pg. 25
Workshop Storage
42
320
Holemaker Cutters - pg. 25
327
Fans & Ventilators
93
32.5
Part No.
237 329
HMPRO35-PM
55
24
3
Weldon Shank Drills - pg. 37
Part No.
170.5 309
Weldon Shank Drills - pg. 37
HMPRO35-MS
Capacity (Diameter)
35mm
Capacity (Diameter)
35mm
Capacity (Depth)
45mm
Capacity (Depth)
35mm
Capacity (Weldon Shank Twist Drills)
16mm
Capacity (Weldon Shank Twist Drills)
16mm
Motor Power Input Power
920 Watt 950 Watt Single Phase 240V
Motor Power Input Power
Speed
350rpm
Speed
Weight
13.0kg
Weight
Magnetic Dead Lift Stroke Height (Min. / Max.)
6000Nm On 25mm Steel Plate 70mm 320 / 390mm
Magnetic Dead Lift Stroke Height (Min. / Max.)
Generators & Pumps
920 Watt 950 Watt Single Phase 240V
Air Compressors
Pneumatic Products
350rpm 14.0kg 6000Nm On 25mm Steel Plate
M7 Air Tools
70mm 327 / 397mm
Impact Sockets
NPK Air Tools
www.itmtools.com.au
9
Magnetic Base Drilling Machines Cutting Tools
HOLEMAKER PRO 35 AUTO COMPACT, AUTOMATIC FEED MACHINE
HOLEMAKER PRO 36 ANGLE DRIVE ULTRA LOW PROFILE MAGNETIC BASE DRILL
Brushware
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines
Cutters 35mm
Twist Drills 16mm
Speed 350rpm
Cutters 36mm
FEATURES • All of the features of the standard Pro 35 machine, with the addition of automatic down feed • Light weight, only 13.5kg • Perfect combination of spindle speeds and torque reduces cycle times for both T.C.T. and H.S.S. cutters • Large capacity coolant tank • Smart control systems for excellent performance and operator’s safety • Maintenance free dual rail slide system ensures extraordinary rigidity and maintenance free operation • Smart magnet technology to ensure sufficient magnetic adhesion • Integrated cutter guard for increased user safety • Supplied in a metal carry case
Twist Drills 12mm
Speed 370rpm
FEATURES • Ultra-low profile angle drive machine • Constant working height of 176mm • Ideal for drilling truck chassis • Utilizes standard 3/4" Weldon shank annular cutters • Extremely low weight • Ratchet wrench type feed handle which is detachable and can easily be attached to either side of the machine • Magnetic Field Shape Control (M.F.S.C.) provides maximum holding power on thin materials • Integrated lifting handle • Integrated cutter guard for increased user safety • Supplied in a blow mould plastic carry case
Metal Cutting Saws Drilling Machines
Grinding Machines WRT-0521-06-20-01-0
14 7 96 14 7 96
Benders
WRT-0521-06-20-01-0
Bevelling Machines & Welding Carriages Punches & Shears
1
16
80
Fans & Ventilators
80
OPTIONAL ACCESSORIES & CONSUMABLES
Workshop Storage
.8
4 1 37 16
.8
37
32 32
4
Holemaker Cutters - pg. 25
OPTIONAL ACCESSORIES & CONSUMABLES
Weldon Shank Drills - pg. 37
Holemaker Cutters - pg. 25
Generators & Pumps
Air Compressors
Pneumatic Products
Part No.
35mm
Capacity (Depth)
52mm
Capacity (Weldon Shank Twist Drills)
16mm
Motor Power Input Power
M7 Air Tools
920 Watt 1000 Watt Single Phase 240V
Speed
350rpm
Weight
13.5kg
Magnetic Dead Lift
Impact Sockets
HMPRO35AUTO
Capacity (Diameter)
Stroke Height (Min. / Max.)
9500Nm On 25mm Steel Plate 70mm 306 / 376mm
Weldon Shank Drills - pg. 37
Part No.
36mm
Capacity (Depth)
30mm
Capacity (Weldon Shank Twist Drills)
12mm
Motor Power Input Power Speed Weight
NPK Air Tools
10
HMPRO36AD
Capacity (Diameter)
Magnetic Dead Lift Stroke Height (Min. / Max.)
920 Watt 1000 Watt Single Phase 240V 370rpm 9.5kg 8900Nm On 25mm Steel Plate 39mm 176mm Constant Working Height
www.itmtools.com.au
Magnetic Base Drilling Machines
HOLEMAKER PRO 40 DURABLE & VERSATILE MACHINE
HOLEMAKER PRO 50 #2 MORSE TAPER, DURABLE MULTI-PURPOSE MACHINE
Cutting Tools
Brushware Cutters 40mm
Twist Drills 16mm
Speed 440rpm
FEATURES • European made machine • Large stroke allowing the use of an optional twist drill chuck • Through spindle coolant system, with an external side mounted gravity feed coolant tank • The feed handles can be placed on either the left or right hand side, for increased versatility • Smart magnet technology to ensure sufficient magnetic adhesion • Integrated cutter guard for increased user safety • Supplied in a metal carry case • Grub screw arbor system, which fastens positively onto Holemaker cutters
HOLEMAKER PRO 40 QG (HMPRO40QG)
• The Holemaker Pro 40 is also available with a quick release arbour system for a fast tool-less approach to inserting and removing Holemaker cutters • Suitable for use with standard Weldon shank annular cutters with 2 flat sections at 90°, as well as Holemaker universal shank cutters
Cutters 52mm
Twist Drills 23mm
Spindle MT2
Gearbox 200rpm 400rpm
Hand Tools
FEATURES • Multi-purpose machine able to use Holemaker cutters, no. 2 Morse taper shank drills & reamers, as well as a drill chuck • Industrial 2 speed gearbox • Cast-iron motor housing • Through spindle coolant system, with an external side mounted gravity feed coolant tank • Left or right hand feed handle operation • Unique semi-automatic gib adjustment system enables simple, fast and always correct fine tuning without any expert knowledge or experience • Smart magnet technology to ensure sufficient magnetic adhesion • Supplied in a metal carry case • Suitable for steel fabrication, engineering workshops & maintenance facilities where a heavy-duty versatile machine is highly beneficial
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws
HOLEMAKER PRO 50 D (HMPRO50D)
The Holemaker Pro 50 is also available with an arbor for use with Holemaker cutters up to 75mm depth of cut
Drilling Machines
Grinding Machines
HOLEMAKER PRO 50 QG (HMPRO50QG)
The Holemaker Pro 50 is also available with a quick release arbour system for a fast tool-less approach to inserting and removing Holemaker cutters
Benders Bevelling Machines & Welding Carriages Punches & Shears
OPTIONAL ACCESSORIES & CONSUMABLES
OPTIONAL ACCESSORIES & CONSUMABLES
Holemaker Cutters - pg. 25
Twist Drill Chuck - pg. 20
Part No.
HMPRO40
Part No.
HMPRO40QG (With Quick Release Arbor)
Capacity (Diameter)
40mm
Capacity (Depth)
52mm
Capacity (Twist Drills) Motor Power Input Power Speed Weight Magnetic Dead Lift Stroke Height (Min. / Max.)
www.itmtools.com.au
10mm (Jobber Drills) 13mm (Stub Drills) 16mm (Weldon Shank Drills) 1020 Watt 1100 Watt Single Phase 240V
Holemaker Cutters - pg. 25
Workshop Storage
Twist Drill Chuck - pg. 20
Generators & Pumps
Part No.
HMPRO50 (With Grub Screw Arbor)
Part No.
HMPRO50QG (With Quick Grip Arbor)
Part No.
HMPRO50D (With 75mm Depth Capacity)
Capacity (Diameter) Capacity (Depth) Capacity (Twist Drills) Motor Power Input Power Speed
12.7kg
Weight
124mm 385 / 509mm
Air Compressors
Taper Shank Drills
440rpm 10,650Nm On 25mm Steel Plate
Fans & Ventilators
Magnetic Dead Lift Stroke Height (Min. / Max.)
Pneumatic Products
52mm 52mm #2 Morse Taper 23mm
M7 Air Tools
1260 Watt 1340 Watt Single Phase 240V 2 Speed 200 / 400rpm
Impact Sockets
16.5kg 12,000Nm On 25mm Steel Plate 153mm 426mm / 579mm
NPK Air Tools
11
Magnetic Base Drilling Machines Cutting Tools
HOLEMAKER PRO 65 ULTRA HEAVY-DUTY STEEL FABRICATION WORKHORSE
HOLEMAKER PRO 75 #3 MORSE TAPER, VARIABLE SPEED MACHINE
Brushware
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines Metal Cutting Saws
Cutters 65mm
Twist Drills 18mm
Cutters 75mm
Gearbox 160rpm 390rpm
The Holemaker Pro 65 is designed to deliver exceptional value for money and return on investment, for both the machine and annular cutters. Every aspect of this machine has been designed to give zero lateral movement of the annular cutter, and constant rpm, meaning this machine will give massively increased cutter life - A very important factor for any high volume steel fabrication workshop. Features: • European made machine • New 1600 Watt Italian motor • Maintenance free dual rail slide system increases machine rigidity and cutter life • Through spindle coolant system, with an external side mounted gravity feed coolant tank • Feed handles can be placed on both sides • Integrated cutter guard for increased user safety • Supplied in a blow mould plastic carry case
Drilling Machines
Twist Drills 32mm
Tapping M24
Spindle MT3
Gearbox 80 - 160rpm 210 - 420rpm
FEATURES • No. 3 Morse taper spindle • 2 speed gearbox with electronic variable speed, Electronic Speed Stabilization System (E.S.S.S.), and motor soft start • Ideal for tapping up to M24 • Through spindle coolant system, with an external side mounted gravity feed coolant tank • Left or right hand feed handle operation • Unique semi-automatic gib adjustment system enables simple, fast and always correct fine tuning without any expert knowledge or experience • Smart magnet technology to ensure sufficient magnetic adhesion • Integrated cutter guard for increased user safety • Supplied in a metal carry case *Supplied complete with arbor for use with Holemaker cutters up to 75mm depth of cut. Optional arbor to take Holemaker cutters up to 110mm depth of cut is available. OPTIONAL ACCESSORIES & CONSUMABLES
Grinding Machines Holemaker Cutters - pg. 25
Benders Twist Drill Chuck - pg. 20
Bevelling Machines & Welding Carriages
Taper Shank Drills
Punches & Shears
Tapping Head - pg. 22
Fans & Ventilators
Workshop Storage OPTIONAL ACCESSORIES & CONSUMABLES
HOLEMAKER PRO 75 SR
Holemaker Cutters - pg. 25
• Additional jog reverse function and swivel base • Once the drill has been fixed to the workpiece with the magnet, it can then be moved back and forward 15mm, or swivelled left and right 30º, and is then fastened into position with one socket head bolt
Generators & Pumps
Air Compressors
Pneumatic Products
M7 Air Tools
Weldon Shank Drills - pg. 37
Part No.
12
HMPRO75
Part No.
HMPRO75SR
65mm
Capacity (Diameter)
Capacity (Depth)
75mm
Capacity (Depth)
18mm
Capacity (Twist Drills)
Capacity (Twist Drills) Input Power Speed Weight
NPK Air Tools
Part No.
Capacity (Diameter)
Motor Power
Impact Sockets
HMPRO65
Magnetic Dead Lift Stroke Height (Min. / Max.)
1500 Watt 1600 Watt Single Phase 240V 2 Speed 160 / 390rpm 17kg 11,000Nm On 25mm Steel Plate 95mm 418 / 513mm
Motor Power
75mm 110mm With Optional Arbor, 75mm Standard #3 Morse Taper 32mm 1650 Watt
Input Power
1800 Watt Single Phase 240V
Speed
2 Speed 80-160 / 210-420rpm
Weight Magnetic Dead Lift Stroke Height (Min. / Max.)
27kg 19,500Nm On 25mm Steel Plate 214mm 525 / 739mm
www.itmtools.com.au
Magnetic Base Drilling Machines
HOLEMAKER PRO 110 #4 MORSE TAPER HEAVY-DUTY MACHINE
DRILLING LARGE HOLES WITH HOLEMAKER MAGNETIC BASE DRILLING MACHINES Holemaker annular cutters are available up to 75mm diameter with a standard 3/4" Weldon shank. 61mm to 200mm diameter cutters are available with a 1-1/4" shank, to help increase the strength of the cutter.
Cutters 110mm
Twist Drills 47mm
Tapping M30
Spindle MT4
Gearbox 80, 135, 160, 250rpm
FEATURES • No. 4 Morse taper spindle for use with taper shank drills, tapping head (M30 capacity) and taper shank reamers • Capable of producing burr-free holes up to 110mm diameter by 110mm* depth • 4-speed heavy-duty mechanical gearbox • Through spindle coolant system, with an external side mounted gravity feed coolant tank • Left or right hand feed handle operation • Unique semi-automatic gib adjustment system enables simple, fast and always correct fine tuning without any expert knowledge or experience • Smart magnet technology to ensure sufficient magnetic adhesion • Integrated cutter guard for increased user safety • Supplied in a metal carry case
Cutting Tools
Brushware
Holemaker machines are supplied as standard with arbors for use with 3/4" shank Holemaker cutters up to 75mm diameter.
Hand Tools
Alternatively, our #3 and #4 Morse Taper spindle machines can be supplied with a number of different arbors options, depending on your specific job requirements. This includes arbors to suit different shank sizes and different cutter depths.
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines
*Supplied complete with arbor for use with 3/4" shank Holemaker cutters up to 75mm diameter and 75mm depth. Optional arbor to take 1-1/4" shank cutters up to 110mm diameter and 110mm depth.
Metal Cutting Saws Drilling Machines
Grinding Machines
#3 MORSE TAPER ARBORS TO SUIT PRO-75, SPECIAL-80 AND SPECIAL-110 Part No.
Morse Taper
Maximum Depth Of Cut
To Suit Shank Size
SAIA3S
#3 MT
50mm
3/4"
SAIA3S-100
#3 MT
110mm
3/4"
SAIA3SW
#3 MT
50mm
1-1/4"
SAIA3SW-100
#3 MT
110mm
1-1/4"
Benders Bevelling Machines & Welding Carriages Punches & Shears
OPTIONAL ACCESSORIES & CONSUMABLES
Holemaker Cutters - pg. 25
Twist Drill Chuck - pg. 20
#4 MORSE TAPER ARBORS TO SUIT PRO-110 AND SPECIAL-140 Part No.
Morse Taper
Maximum Depth Of Cut
To Suit Shank Size
SPPRO11011
#4 MT
50mm
3/4"
SAIA4S-100
#4 MT
110mm
3/4"
SPPRO11011B
#4 MT
50mm
1-1/4"
SAIA4SW-100
#4 MT
110mm
1-1/4"
For example, when drilling an 82mm diameter hole through 100mm solid steel with a Holemaker PRO-110, arbor part# SAIA4SW-100 would be used with a Holemaker Maxi-Cut Cutter part# MAX100-82B (see page 35)
Fans & Ventilators
Workshop Storage
Generators & Pumps
Air Compressors Taper Shank Drills
Part No. Capacity (Diameter) Capacity (Depth) Capacity (Twist Drills) Motor Power Input Power Speed Weight Magnetic Dead Lift Stroke Height (Min. / Max.)
www.itmtools.com.au
HMPRO110 110mm 110mm With Optional Arbor, 75mm Standard #4 Morse Taper 47mm 1650 Watt 1800 Watt Single Phase 240V 4 Speed Heavy-Duty Mechanical Gearbox 85 / 135 / 160 / 250rpm
When drilling large diameter or deep holes with Holemaker machines, the optional 1100ml pressure feed coolant tank is highly beneficial. The pressure feed tank will increase the coolant flow to the centre of the cut, and will also allow for larger cuts to be completed, without having to re-fill the coolant tank during the cutting process.
Pneumatic Products
M7 Air Tools
Impact Sockets
31.0kg 22,000Nm On 25mm Steel Plate 214mm
Part No.
Description
566mm / 780mm
SA-WPB
1100ml Pressure Feed Coolant Bottle
NPK Air Tools
13
Magnetic Base Drilling Machines Cutting Tools
SERIES
Brushware
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines Metal Cutting Saws Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears
Fans & Ventilators
Workshop Storage
Generators & Pumps
Air Compressors
Pneumatic Products
M7 Air Tools
The Holemaker Special Series features the latest and most innovative technology available in magnetic base drilling machines, and are the result of over 25 years of machine development. These European made machines are designed for the demanding industrial operator, who requires a machine capable of performing a very wide range of tasks with optimal performance and cutting tool life.
360-Degree Visual Monitoring System Ready To Operate (Solid Green)
Special Series Features • New generation Italian made motor With up to 28% more power than motors featured on our Pro Series machine range
Operating Normally (Solid White)
• Intelligent speed control system Maintains stable speed regardless of load changes. This results in ideal rpm speeds through-out the entire hole drilling process, which dramatically increases the cutting tool life and finish quality of the cut. • Electronic variable speed control Achieves the ideal rpm for your application. This also means the machines are ideal for applications such as tapping.
Motor Overload (Solid Blue)
• Forward and reverse operation Makes these machines ideal for tapping applications • Electronic clutch Engages in the case of cutting tool breakage, for increased user safety • Overload and overheat protection Ensure the machine is not damaged or warn by excessive use or feed pressure
Other Monitoring System Indicators Motor Overheat (Solid Red) Emergency Stop / Low Adhesion (Solid Violet)
• Tilt sensor Stops the motor in cases of machine break away. This can help to stop the breakage of cutting tools and also increases user safety.
Inadequate Adhesion (Flashing Green)
• 360-degree visual monitoring system With coloured lights to indicate current condition of the drill and gives safety and diagnostic information e.g. worn brushes
Worn Brushes (Red Flashes To Green)
• Intuitive control panel at top of the drill Allows the machine to be easily operated from any position • Very light weight Compared with other similar capacity machines, and up to 33% lighter than comparable Pro Series machines
Near Overload (Flashing Blue) Voltage Drop (Red Flashes To Blue)
Intuitive Control Panel
Speed Control Motor START Reverse Motor START Forward Motor STOP 360 Degree Visual Monitoring System
Impact Sockets
NPK Air Tools
14
www.itmtools.com.au
Magnetic Base Drilling Machines
HOLEMAKER SPECIAL 60 #2 MORSE TAPER, UNIVERSAL TAPPING & DRILLING MACHINE
HOLEMAKER SPECIAL 80 #3 MORSE TAPER, UNIVERSAL TAPPING & DRILLING MACHINE
Cutting Tools
Brushware
Cutters 60mm
Twist Drills 23mm
Tapping M20 (3/4")
Spindle MT2
Gearbox 160 - 250rpm 390 - 580rpm
Cutters 80mm
Features: • No. 2 Morse taper spindle • 2 Speed gearbox with variable speed control • New generation Italian made motor • Intelligent speed control system • Electronic variable speed control • Electronic clutch • Overload and overheat protection • Tilt sensor • 360-degree visual monitoring system • Intuitive control panel at top of the drill • Very light weight • Through spindle coolant system • Integrated cutter guard for increased user safety • Supplied in a blow mould plastic carry case
Twist Drills 25mm
Tapping M24 (15/16")
Spindle MT3
Gearbox 120 - 190rpm 290 - 450rpm
Hand Tools
Features: • No. 3 Morse taper spindle • 2 Speed gearbox with variable speed control • New generation Italian made motor • Intelligent speed control system • Electronic variable speed control • Electronic clutch • Overload and overheat protection • Tilt sensor • 360-degree visual monitoring system • Intuitive control panel at top of the drill • Very light weight • Through spindle coolant system • Integrated cutter guard for increased user safety • Supplied in a blow mould plastic carry case
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws Drilling Machines
Grinding Machines
Benders
OPTIONAL ACCESSORIES & CONSUMABLES
OPTIONAL ACCESSORIES & CONSUMABLES
Bevelling Machines & Welding Carriages Punches & Shears
Holemaker Cutters - pg. 25
Holemaker Cutters - pg. 25
Fans & Ventilators
Part No.
Twist Drill Chuck - pg. 20
Twist Drill Chuck - pg. 20
Taper Shank Drills
Taper Shank Drills
Tapping Head - pg. 22
Tapping Head - pg. 22
HMSPECIAL60
Part No.
Capacity (Diameter)
60mm
Capacity (Diameter)
Capacity (Depth)
75mm
Capacity (Depth)
Capacity (Twist Drills)
23mm
Capacity (Twist Drills)
Capacity (Tapping)
M20
Capacity (Tapping)
Generators & Pumps
Air Compressors
HMSPECIAL80 80mm 110mm With Optional Arbor, 75mm Standard M24
Morse Taper 2
Spindle Taper
Morse Taper 3
Motor Power
1500 Watt
Motor Power
1500 Watt
Speed Weight Magnetic Dead Lift Stroke Height (Min. / Max.)
www.itmtools.com.au
1600 Watt Single Phase 240V 2 Speed 160-250 / 390-580rpm 17.0kg 11,000Nm On 25mm Steel Plate 190mm 500 / 690mm
Input Power Speed Weight Magnetic Dead Lift Stroke Height (Min. / Max.)
Pneumatic Products
25mm
Spindle Taper Input Power
Workshop Storage
M7 Air Tools
1600 Watt Single Phase 240V 2 Speed 120-190 / 290-450rpm 18.0kg
Impact Sockets
11,000Nm On 25mm Steel Plate 190mm 554 / 744mm
NPK Air Tools
15
Magnetic Base Drilling Machines Cutting Tools
HOLEMAKER SPECIAL 110 #3 MORSE TAPER, UNIVERSAL TAPPING & DRILLING MACHINE
HOLEMAKER SPECIAL 140 EXTRA HEAVY-DUTY TAPPING & DRILLING MACHINE
Brushware
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines
Cutters 110mm
Twist Drills 32mm
Tapping M30 (1-1/4")
Spindle MT3
Cutters 140mm
Gearbox 4 Speed Variable
Features: • No. 3 Morse taper spindle • 4 Speed gearbox with variable speed control • New generation Italian made motor • Intelligent speed control system • Electronic variable speed control • Electronic clutch • Overload and overheat protection • Tilt sensor • 360-degree visual monitoring system • Intuitive control panel at top of the drill • Very light weight • Through spindle coolant system • Integrated cutter guard for increased user safety • Supplied in a metal carry case
Twist Drills 47mm
Tapping M42 (1-5/8")
Spindle MT4
Gearbox 4 Speed Variable
Features: • No. 4 Morse taper spindle • 4 Speed gearbox with variable speed control • New generation Italian made motor • Intelligent speed control system • Electronic variable speed control • Electronic clutch • Overload and overheat protection • Tilt sensor • 360-degree visual monitoring system • Intuitive control panel at top of the drill • Very light weight • Through spindle coolant system • Supplied in a metal carry case
Metal Cutting Saws Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages
OPTIONAL ACCESSORIES & CONSUMABLES
Punches & Shears Holemaker Cutters - pg. 25
Fans & Ventilators Twist Drill Chuck - pg. 20
Workshop Storage Taper Shank Drills
OPTIONAL ACCESSORIES & CONSUMABLES
Tapping Head - pg. 22
Holemaker Cutters - pg. 25
Tapping Head - pg. 22
Generators & Pumps
Air Compressors
Part No. Capacity (Diameter)
Pneumatic Products
Capacity (Depth) Capacity (Twist Drills) Capacity (Tapping)
M7 Air Tools
Impact Sockets
16
110mm 110mm With Optional Arbor, 75mm Standard 32mm
Part No. Capacity (Diameter) Capacity (Depth) Capacity (Twist Drills)
Taper Shank Drills
HMSPECIAL140 140mm 110mm With Optional Arbor, 75mm Standard 47mm
M30 (1-1/4")
Capacity (Tapping)
M42 (Through Holes)
Spindle Taper
Morse Taper 3
Capacity (Tapping)
M33 (Blind Holes)
Motor Power
2150 Watt
Spindle Taper
2300 Watt Single Phase 240V
Motor Power
Input Power Speed Weight Magnetic Dead Lift
NPK Air Tools
HMSPECIAL110
Twist Drill Chuck - pg. 20
Stroke Height (Min. / Max.)
4 Speed 75-110 / 135-200rpm / 220-320rpm / 390-570rpm 25.0kg 18,000Nm On 25mm Steel Plate 225mm 597 / 822mm
Input Power Speed Weight Magnetic Dead Lift Stroke Height (Min. / Max.)
Morse Taper 4 2150 Watt 2300 Watt Single Phase 240V 4 Speed 55-85 / 100-150rpm / 200-300rpm / 350-520rpm 31.0kg 25,000Nm On 25mm Steel Plate 260mm 634 / 894mm
www.itmtools.com.au
Magnetic Base Drilling Machines
HOLEMAKER 45 PNEUMATIC #2 MORSE TAPER, VERSATILE MULTI-PURPOSE MACHINE
HOLEMAKER 35 PNEUMATIC PNEUMATIC POWERED LOW PROFILE ANGLE DRIVE MACHINE
Cutting Tools
Brushware
Cutters 35mm
Cutters 45mm
Speed 240rpm
Twist Drills 16mm
Features: • Small portable design, constant working height of 183mm • Both the machine and the body of the HMP35AD-ATEX drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion • The combination of pneumatic drive and permanent magnetic base eliminate the need for electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry • Through spindle side mounted coolant system • Integrated cutter guard for increased user safety WRT-0520 • Supplied in a metal carry case
Twist Drills 23mm
Spindle MT2
Gearbox 190rpm 290rpm
Hand Tools
Features: • Compact portable design • Up to 45mm diameter and 52mm depth using Holemaker cutters, and 23mm diameter using taper shank drills or reamers • No. 2 Morse taper spindle • Both the machine and the body of the HMP45-ATEX drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion • The combination of pneumatic drive and permanent magnetic base eliminate the need for electric power supply thus making this machine an ideal solution in many hazardous environments such as oil drilling platforms, mining industry, WRT-0632 shipbuilding or petrochemical industry • Through spindle side mounted coolant system • Integrated cutter guard for increased user safety • Supplied in a metal carry case 24
3.5
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws
0 46 17
2
183
532
Drilling Machines
3
14 91
.5
0 21 325
32
91
.5
64
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears
Fans & Ventilators
Workshop Storage OPTIONAL ACCESSORIES & CONSUMABLES
OPTIONAL ACCESSORIES & CONSUMABLES
Generators & Pumps Holemaker Cutters - pg. 25
Weldon Shank Drills - pg. 37
Part No.
Holemaker Cutters - pg. 25
HMP35AD-ATEX
Part No.
Capacity (Diameter)
35mm
Capacity (Diameter)
Capacity (Depth)
25mm
Capacity (Depth)
Capacity (Weldon Shank Twist Drills) Motor Power
16mm 800 Watt Pneumatic, 1400L/min
Speed
240rpm
Weight
17.0kg
Height
183mm Constant Working Height
Stroke
39mm
Magnetic Dead Lift
6500Nm On 25mm Steel Plate
Capacity (Twist Drills) Motor Power Speed Weight Magnetic Dead Lift Height (Min. / Max.) Stroke
Twist Drill Chuck - pg. 20
Taper Shank Drills
HMP45-ATEX
Air Compressors
45mm 52mm #2 Morse Taper 23mm
Pneumatic Products
800 Watt Pneumatic, 1400L/min 2 Speed 190 / 290rpm 19.0kg 7500Nm On 25mm Steel Plate
M7 Air Tools
690mm / 750mm 150mm
Impact Sockets
NPK Air Tools
www.itmtools.com.au
17
Magnetic Base Drilling Machines Cutting Tools
HOLEMAKER TAP 50 #5 MORSE TAPER LARGE CAPACITY MACHINE
HOLEMAKER PNEUMATIC PRO 200A ATEX #5 MORSE TAPER
Brushware
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools
Cutters 200mm
Twist Drills 52mm
Tapping M52
Gearbox 20 - 40rpm 45 - 110rpm The TAP 50 is a portable magnetic drilling machine with 200mm diameter drilling and M52 tapping capacity (with optional tapping head), 52mm twist drill capacity and a 3.0kW single phase 240V motor. The spindle bore is No.5 Morse taper. The TAP 50 is designed for special and challenging applications that no other portable magnetic drill has been able to solve before. • Feed handles can be placed on the left or right sides of the machine • Reversible • Heavy-duty dual rail slides provide rigidity and quick movement
Cutters 200mm
Spindle MT5
Sharpening Machines
• • • • • • • • • • • •
Twist Drills 45mm
Tapping M52
Spindle MT5
Gearbox 20rpm 80rpm
Pneumatic portable magnetic drilling machine 200mm Diameter drilling and M52 tapping capacity No.5 Morse taper 1-1/4" Weldon drill chuck Robust design built with modular construction Can be handled by a single operator 2 Speeds - ideal for drilling and tapping Integrated air processing module 2 x 14,700Nm magnetic adhesion force Adaptive magnets, can work on curved or flat surfaces Integrated cutter guard Forward and reverse operation
Both the machine and the body of the PRO200A drill is certified ATEX II2G/D C IIC T6;T4 and meets the requirements for use in areas with a risk of explosion
Metal Cutting Saws Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears WRT-0490
Fans & Ventilators 200mm
Capacity (Depth)
250mm
Capacity (Tapping)
Generators & Pumps
Capacity (Twist Drills) Motor Power Input Power Gearbox
Air Compressors
TAP50
Capacity (Diameter)
52mm 52mm 3000 Watt Single Phase 240V 2 Speed Variable Gearbox 20-40 / 45-110
Weight
53.0kg
Stroke
265mm
Height (Min. / Max.)
950,8
Part No.
Workshop Storage
710mm / 975mm
79
Pneumatic Products
0 10
6
M7 Air Tools
Impact Sockets
Part No.
18
HM-PRO200A
Capacity (Diameter)
200mm
Capacity (Tapping)
52mm
Capacity (Twist Drills) Motor Power Gearbox
NPK Air Tools
3 7 46
36
45mm 3650 Watt 2 Speed Gearbox Reversible 20 / 80rpm
Weight
130kg
Stroke
400mm
Magnetic Dead Lift
2 x 14,700Nm
www.itmtools.com.au
Magnetic Base Drilling Machines
ACCESSORIES
Cutting Tools
INDUSTRIAL ARBORS Brushware
These arbors are designed to adapt conventional machines e.g. drill presses, lathes, milling machines and others to accept Holemaker annular cutters. This becomes a very economical alternative to normal methods of drilling or boring large diameter or deep holes. By adding an extension arbor and long series annular cutter to your industrial arbor, you can achieve depths of up to 320mm in hollow section steel. Time savings in excess of 40% over normal drilling methods are not unusual. • • • •
Hand Tools
Adapt your drill press or lathe to use Holemaker annular cutters Time savings in excess of 40% Economical compared with conventional methods Large cutting capacity up to 200mm diameter
Clamps & Vices Engineer’s & Measuring Tools
Sharpening Machines Metal Cutting Saws
EXTENSION ARBORS Morse Taper
Part No.
Maximum Depth Of Cut
To Suit Shank Size
SAIA2S
#2 MT
50mm
3/4"
SAIA2S-75
#2 MT
75mm
3/4"
SAIA3S
#3 MT
50mm
3/4"
SAIA3S-100
#3 MT
110mm
3/4"
SAIA3SW
#3 MT
50mm
1-1/4"
SAIA3SW-100
#3 MT
110mm
1-1/4"
SAIA4S
#4 MT
50mm
3/4"
SAIA4S-100
#4 MT
110mm
3/4"
SAIA4SW
#4 MT
50mm
SAIA4SW-100
#4 MT
110mm
• Allows greater depths to be reached with your Holemaker cutters
Grinding Machines
Benders Part No.
Extension Length
Pilot Pin Diameter
Shank Diameter
Minimum Cutter .
1-1/4"
SAE025-6
25mm
6.34mm
3/4"
36mm
1-1/4"
SAE050-6
50mm
6.34mm
3/4"
36mm
SAE075-6
75mm
6.34mm
3/4"
36mm
SAE100-6
100mm
6.34mm
3/4"
36mm
SAIA5MT
#5 MT
50mm
3/4"
SAIA5S-100
#5 MT
110mm
3/4"
Drilling Machines
SAIA5SW
#5 MT
50mm
1-1/4"
SAE025-8
25mm
8mm
3/4"
36mm
SAIA5SW-100
#5 MT
110mm
1-1/4"
SAE050-8
50mm
8mm
3/4"
36mm
SAE075-8
75mm
8mm
3/4"
36mm
SAE100-8
100mm
8mm
3/4"
36mm
SAE050-8B
50mm
8mm
1-1/4"
50mm
SAE100-8B
100mm
8mm
1-1/4"
50mm
Bevelling Machines & Welding Carriages Punches & Shears
Fans & Ventilators
Workshop Storage
Generators & Pumps
Air Compressors
Our large range of magnetic base drilling machine accessories enables the most diverse range of jobs to be completed successfully Part # SP18150
Pneumatic Products
M7 Air Tools Part # MAX75-45
Part # SAE075-8
Part # SAIA3S-100
Impact Sockets
NPK Air Tools
www.itmtools.com.au
19
Magnetic Base Drilling Machines Cutting Tools
QUICK GRIP INDUSTRIAL ARBORS
ADAPTORS
• A tool less approach to holding 3/4" Weldon shank Holemaker cutters in place • Complete with coolant inducer
Brushware
Hand Tools
Engineer’s & Measuring Tools Sharpening Machines
SACA-52HSS
SADCA
Clamps & Vices
Part No.
Morse Taper Maximum Depth Of Cut To Suit Shank Size
SAQCA-2MT
#2 MT
50mm
3/4"
SAQCA-3MT
#3 MT
50mm
3/4"
Part No.
Description
SADCA
3/4" Male Universal Shank To 1/2" - 20 UNF Male Thread
SACA-52-6
3/4" Male Universal Shank To 3/4" Female Weldon Shank - 6.34mm Pin
SACA-52-8
3/4" Male Universal Shank To 3/4" Female Weldon Shank - 8mm Pin
SAQA-52
3/4" Male Quick In Shank To 3/4" Female Weldon Shank - 6.34mm Pin
Metal Cutting Saws Drilling Machines
DRILL CHUCKS & ADAPTORS
MAGNETIC CLEAN UP WAND
• Adapt your Holemaker machine to use twist drill bits
• Ideal for collecting ferrous materials including metal shavings, screws etc • Stainless-steel construction with rubber handle
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears
Fans & Ventilators
Workshop Storage
Generators & Pumps
Part No.
To Suit Machines
Arbor / Adaptor
Capacity
SA70102
HMPRO40
-
13mm
SA20102
HMPRO50 / HMSPECIAL60
#2 MT
13mm
SA3344
HMPRO75 / HMSPECIAL80 HMSPECIAL110
#3 MT
19mm
SA4019
HMPRO110 / HMSPECIAL 140
#4 MT
19mm
Part No.
Description
Length
Diameter
MB-00
Mini Magnetic Wand
240mm
16mm
MB-01
Midi Magnetic Wand
385mm
25mm
MB-30
Maxi Magnetic Wand
1008mm
25mm
DRILL CHUCK & ADAPTOR
MAGNETIC CLEAN UP BROOM
• Adapt your Holemaker machine to use twist drill bits • Includes SADCA 3/4" male universal shank and DC11506-1 13mm drill chuck
• Ideal for collecting ferrous materials including metal shavings, screws etc. off the floor • 355mm magnetic surface width • 385mm overall width
Air Compressors
Pneumatic Products
M7 Air Tools
Impact Sockets
NPK Air Tools
20
Part No.
Description
Part No.
Description
SADCA-13
13mm Drill Chuck And 3/4" Male Universal Shank
MB-15
Magnetic Clean Up Broom
www.itmtools.com.au
Magnetic Base Drilling Machines
PIPE ATTACHMENT
PILOT PINS
• Adapt your Holemaker machine to use on pipe • Can be used on any ferrous and non-ferrous materials SAPA-1: Single chain SAPA-2: Double chain
A pilot pin serves three main purposes: • Ejects the slug at the end of the cut • Provides coolant feed into the centre of the cutter • Locates the centre of the cut
Part No.
D
L
W 225 C A SAPA-1
B
Ø min = 80mm Ø max = 250mm
L
D
Cutting Tools
Diameter
Brushware
Annular Cutter Depth Of Cut
Overall Length
SP16001
4.70mm
25mm
77mm
SP16002
4.70mm
50mm
102mm
SP16003
6.34mm
25mm
77mm
SP16004
6.34mm
50mm
102mm
SP16005
6.34mm
75mm
127mm
SP16008
6.34mm
50mm 1-1/4" Shank
133mm
SP16009
6.34mm
100mm - Suit MAX100 (14 - 17mm Ø)
160mm
SP16010
6.34mm
100mm - Suit Extensions Arbors 153mm
SP16011
6.34mm
125mm
188mm
SP16012
6.34mm
150mm
203mm
SP16013
6.34mm
175mm
239mm
SP16015
6.34mm
Suit MAX35 (12 - 17mm Ø)
90mm
SP18025
8mm
25mm
77mm
SP18035
8mm
35mm
90mm
SP18050
8mm
50mm
108mm
SP18075
8mm
75mm
130mm
SP18100
8mm
100mm
160mm
SP18125
8mm
125mm
180mm
SP18150
8mm
150mm
205mm
SP18175
8mm
175mm
230mm
SP18200
8mm
200mm
255mm
W 225
2-PIECE PILOT PINS
C
These two part pilot pins allow the depth of cut capacity to be increased. i.e. a machine that is limited to 52mm depth of cut as standard can be increased to 75, 100 or 125mm depth of cut. A depth of cut capacity will still be limited by stroke.
A B SAPA-2
Ø min = 150mm Ø max = 500mm
Part No.
Description
SAPA-1
Suit Pipe Ø 80mm To Ø 250mm Maximum Base Dimensions: 95 x 204mm
181 217 52.5
Suit Pipe Ø 150mm To Ø 500mm Maximum Base Dimensions: 130 x 254mm
234 270 52.5
SAPA-2
A
B
C
D
L
W
221 205 95
260 258 130
Part No.
Diameter
Annular Cutter Depth Of Cut
Overall Length
SP20001
8mm
75mm
130mm
SP20003
8mm
100mm
158mm
SP20005
8mm
125mm
184mm
SP20007
8mm
150mm
200mm
SP20009
8mm
200mm
256mm
PILOT PIN SELECTION CHART
• Adapt your Holemaker machine for use on non-ferrous materials • Surface does not have to be smooth, imperfections up to 3.0mm
Use chart below to determine the correct pin for use with your extension arbor EXTENSION ARBOR LENGTH 25mm
50mm
75mm
25mm
SP16004
SP16005
SP16010
SP16011
50mm
SP16005
SP16010
SP16011
SP16012
DM110SP 3383Nm
www.itmtools.com.au
57 lpm / 2 cfm @ 85 psi
400 L x 153 W x 100 H
Metal Cutting Saws Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears
Fans & Ventilators
Workshop Storage
Air Compressors
Pneumatic Products
75mm
SP16010
SP16011
SP16012
SP16013
SP16011
SP16012
SP16013
-
M7 Air Tools
SP18050
SP18075
SP18100
SP18125
Impact Sockets
25mm
Dimensions (mm)
Sharpening Machines
100mm 8.0mm Pin
Part No.
Engineer’s & Measuring Tools
100mm
6.34mm Pin
Surface Holding Min. Air Supply Power
Clamps & Vices
Generators & Pumps
VACUUM PAD
Annular Cutter Depth Of Cut
Hand Tools
50mm
SP18075
SP18100
SP18125
SP18150
75mm
SP18100
SP18125
SP18150
SP18175
100mm
SP18125
SP18150
SP18175
SP18200
150mm
SP18175
SP18200
-
-
NPK Air Tools
21
Magnetic Base Drilling Machines Cutting Tools
TAPPING SYSTEMS QUICK CHANGE TAPPING SYSTEM
Brushware
Tapping Chuck - TC
Tapping Collet - TASC
Tap
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools Sharpening Machines Metal Cutting Saws
MORSE TAPER TAPPING CHUCKS (TC)
TAPPING COLLETS WITH SAFETY CLUTCH (TASC)
Part No.
Type
Description
To Suit
SPTH-MT2-31 SPTH-MT3-31 SPTH-MT3-48 SPTH-MT4-60
MT2-31 MT3-31 MT3-48 MT4-60
MT2 x 31mm MT3 x 31mm MT3 x 48mm MT4 x 60mm
HMSPECIAL60 HMSPECIAL80, HMSPECIAL110 HMSPECIAL110 HMSPECIAL140
Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages Punches & Shears
TAPPING REDUCTION ADAPTORS Part No.
Type
Description
SPTH-RA-2-1 SPTH-RA-3-1 SPTH-RA-3-2 SPTH-RA-4-2 SPTH-RA-4-3
RA 2/1 RA 3/1 RA 3/2 RA 4/2 RA 4/3
2/1 (31mm / 19mm) 3/1 (48mm / 19mm) 3/2 (48mm / 31mm) 4/2 (60mm / 31mm) 4/3 (60mm / 48mm)
Fans & Ventilators
Workshop Storage
Generators & Pumps
Air Compressors
Pneumatic Products
M7 Air Tools
Impact Sockets
NPK Air Tools
22
Part No.
Type
Connection Tap Diameter Size (A)
Tap Shank Tap Shank Size (B) Size (C)
SPTH-TASC19-M3
TASC-1
19mm
M3
3.5mm
2.7mm
SPTH-TASC19-M4
TASC-1
19mm
M4
4.5mm
3.4mm
SPTH-TASC19-M5-6
TASC-1
19mm
M5, M6 6mm
4.9mm
SPTH-TASC31-M8
TASC-2
31mm
M8
8mm
6.2mm
SPTH-TASC31-M10
TASC-2
31mm
M10
10mm
8mm
SPTH-TASC31-M12
TASC-2
31mm
M12
9mm
7mm
SPTH-TASC31-M14
TASC-2
31mm
M14
11mm
9mm
SPTH-TASC31-M16
TASC-2
31mm
M16
12mm
9mm
SPTH-TASC31-M18
TASC-2
31mm
M18
14mm
11mm
SPTH-TASC31-M20
TASC-2
31mm
M20
16mm
12mm
SPTH-TASC48-M16
TASC-3
48mm
M16
12mm
9mm
SPTH-TASC48-M18
TASC-3
48mm
M18
14mm
11mm
SPTH-TASC48-M20
TASC-3
48mm
M20
16mm
12mm
SPTH-TASC48-M22-24 TASC-3
48mm
M22, M24
18mm
14.5mm
SPTH-TASC48-M27
TASC-3
48mm
M27
20mm
16mm
SPTH-TASC48-M30
TASC-3
48mm
M30
22mm
18mm
SPTH-TASC60-M33
TASC-4
60mm
M33
25mm
20mm
SPTH-TASC60-M36
TASC-4
60mm
M36
28mm
22mm
SPTH-TASC60-M42
TASC-4
60mm
M42
32mm
24mm
• Above tap sizes are based on DIN standards, check the shank and square size of the collet suits the taps you will use
TAPPING SYSTEM COMPATIBILITY OVERVIEW Tapping Chuck Model
Tapping Collet Type TASC-1 (19mm)
Tapping Collet Type TASC-2 (31mm)
Tapping Collet Type TASC-3 (48mm)
Tapping Collet Type TASC-4 (60mm)
SPTH-MT2-31
Yes When Used With SPTH-RA-2-1
Yes
N/A
N/A
SPTH-MT3-31
Yes When Used With SPTH-RA-2-1
Yes
N/A
N/A
SPTH-MT3-48
Yes When Used With SPTH-RA-3-1
Yes When Used With SPTH-RA-3-2
Yes
N/A
SPTH-MT4-60
N/A
Yes When Used With SPTH-RA-4-2
Yes When Used With SPTH-RA-4-3
Yes
AXIAL FLOAT TAPPING HEADS • Protection against tap breakage ensured by an ultra-sensitive and smooth multi-position operating ball-clutch • Forward and reverse ball drive design transmits rotational power to the tap and disengages smoothly and silently • Axial float ensures smooth tapping and better thread profile • Cushioned drive incorporating compression and extension, eliminates the possibility of cross threading during the tapping process, and ensures clean and accurate threads • A planetary gear reversing mechanism transmits smooth positive reverse to the tap retraction and it retracts 75% faster than it enters • Accurate depth control by means of it's precise neutral mechanism
Part No.
Description
SPTH102
3 - 12mm Tapping Head With #2 MT
SPTH103
8 - 20mm Tapping Head With #3 MT
www.itmtools.com.au
Magnetic Base Drilling Machines
CUTTING FLUID SOLUBLE METAL WORKING FLUID • Extra heavy-duty, water soluble metal working fluid for use on ferrous and non-ferrous metals • Formulated to extend tool life and improve surface finish • Contains corrosion inhibitors to protect machine parts • High resistance to bacterial and fungal growth • Mix 1 part fluid to 10 parts water
Cutting Tools
TAP MAGIC XTRA THICK • Designed for use when making cuts of long duration on the hardest metals such as Inconel, titanium & stainless-steel • Highly effective on any metal up to 45 HRC • Contains the proprietary EP-X3 additive for a performance boost • Virtually eliminates work hardening and it has an extended cling time - so it stays with the tool and workpiece longer for deep hole cuts
Brushware
Hand Tools
Clamps & Vices Engineer’s & Measuring Tools
Part No.
Description
Part No.
Description
SPFLUID
500ml Metal Working Fluid
TAP70016E
472ml Bottle (12 Per Carton)
SPFLUID1
1 Litre Metal Working Fluid
SPFLUID5
5 Litre Metal Working Fluid
SPFLUID20
20 Litre Drum With Provision To Fit Tap
Sharpening Machines Metal Cutting Saws
PRESSURE FEED COOLANT BOTTLE
TAP MAGIC METAL WORKING FLUID EP-XTRA
• Connects directly to any magnetic drilling machine with a through spindle coolant system • Apply cutting fluid to the centre of the cut when drilling in vertical & horizontal positions • Also suitable for applications where a large amount of fluid is required - e.g. large diameter, deep cutting, or very hard materials
• Highly effective for all cutting operations on all metals. Excelled performance on hard metals and with difficult extreme-pressure cuts of long duration. • Notice dramatic improvements in tool life
Drilling Machines
Grinding Machines
Benders Bevelling Machines & Welding Carriages
Part No.
Description
Part No.
Description
SA-WPB
1100ml Pressure Feed Coolant Bottle
TAP10004E
125ml Plastic Bottle (24 Per Carton)
TAP10125E
125ml Plastic Bottle
TAP10500E
500ml Plastic Bottle
TAP11000E
1 Litre Plastic Bottle
TAP15000E
5 Litre Plastic Bottle
TAP120000E
20 Litre Drum With Provision To Fit Tap
TAP MAGIC ALUMINIUM • Specially engineered for cutting and machining operations on aluminium and other non-ferrous metals • The most effective cutting fluid for working with aluminium • Enjoy superior performance, superb precision, and a beautiful microfine finish. • Dissipates heat rapidly and provides closer tolerances • Helps promote longer tool life
Punches & Shears
Fans & Ventilators
Workshop Storage
Generators & Pumps
Air Compressors
Pneumatic Products
M7 Air Tools
www.itmtools.com.au
Part No.
Description
TAP20004A
125ml Sprout Top Can (24 Per Carton)
TAP20016A-P
472ml Bottle (12 Per Carton)
TAP25000A
5 Litre Plastic Bottle
TAP20640A
5 Gallon Drum
Impact Sockets
NPK Air Tools
23
18 BUSINESS ST, YATALA QLD 4207 AUSTRALIA PH: 07 3287 1114 FX 07 3287 1115 sales@industrialtool.com.au www.itmtools.com.au
NATIONAL SALES & DISTRIBUTION LOCATIONS
HEAD OFFICE Sales Office Distribution Warehouse Sales Office Distribution Warehouse Sales Office
Sales Office Sales Office Distribution Warehouse Sales Office Distribution Warehouse
WWW.ITMTOOLS.COM.AU