Paradiene JS R4 SBS elastomeric bitumen membrane with self-adhesive side laps as underlayer of a loose-laid two ply system under heavy protection
A Elasticity of the SBS elastomeric bitumen compound A Resistance to cracking and puncturing
of the polyester reinforcement A Reliability of the self-adhesive side lap A No use of separating underlay on insulation A Thermal screen non requested on
flame sensitive insulation (EPS, etc.) Packing Rolls of 2 x 12m each – Weight: 85kg
Main uses Two-layer waterproofing system for flat roofs: non accessible terrace protected with ballast (slope 0 to 5%); pedestrian terrace with concrete slab (slope 1.5 to 5%); pedestrian terrace with slabs on adjustable supports (slope 0 to 5%); terrace accessible to vehicles with hard protection (slope 2 to 5%). Particularly suitable for application on flame-sensitive insulating panels.
Paradiene JS R4
Non accessible terrace protected with ballast
torched Parequerre reinforcement angle
Loose-laid Torched Paradiene JS R4 Paradiene S top-layer
Pedestrian terrace with slabs on adjustable supports Pedestrian slabs Plots Zoom adjustable supportsa
Siplast Primer
Torched Paradiene S top-layer
Upstand of the vapour control layer torched Parequerre reinforcement angle
Torched Paradiene 35 S R4 top-layer
Relevant insulation Torched vapour control layer Upstand of the vapour control layer torched Parequerre reinforcement angle
Torched vapour control layer Siplast Primer
Pedestrian terrace with concrete slab Torched Paradial S top-layer
loose-laid Paradiene JS R4
Relevant insulation
Separating layer
Protection with wire-mesh cement mortar
Concrete slab Torched Paradiene S top-layer Loose-laid Paradiene JS R4
Relevant insulation Torched vapour control layer Upstand of the vapour control layer torched Parequerre Siplast Primer reinforcement angle
Terrace accessible to vehicles
Protection with wire-mesh cement mortar Torched Paradial Paradiene 35 S R4 underlayer, torched
Reinforced concrete slab
Siplast Primer, torched
Separating layer
Paradiene JS R4 underlayer, loose-laid
Paradiene BD S top-layer, torched
Description
Performances
Complementary information
SBS elastomeric bitumen membrane with non woven polyester reinforcement Elastomeric bitumen compound: 3kg/m² Non woven polyester reinforcement: 0.180kg/m² Sand surfacing: 0.25kg/m² Underfacing with plastic film: 0.01kg/m², allowing for independent waterproofing Along side laps, connecting sides are protected by 2 peel-off siliconised paper strips Nominal thickness: 2.65mm (mini 2.50mm) Nominal weight: 3.4kg/m²
Paradiene JS R4 technical data sheet
12, rue de la Renaissance F-92184 Antony Cedex Tél. +33 (0)1 40 96 35 00 Fax. +33 (0)1 46 66 24 85 http://www.siplast-international.com
Tensile strength (transversal): 550N/50mm Tensile strength (longitudinal): 750N/50mm Elongation: 40% Résistance to static puncturing: 20g (EN 12730) Résistance to dynamic puncturing: 20mm (EN 12691)
Application Once placed Paradiene JS R4, peel off on the same time both siliconised paper strips from the side laps. Side laps stick one to the other, protecting thus the insulation from the torch flame. The heat released while torching the cap sheet fully secures the strong bond with a perfect weld.
Customs nomenclature 68.07.10.19.0.00.0.P.
Safety Paradiene JS R4 is not rated as dangerous (for the applications described in this document) This document is only a guide. Siplast-Icopal reserves the right to change the composition and fixing recommendations of products as a result of evolution of knowledge and technology.
N3-19 | 03/07 | Photos : Icopal | R.C.S. Nanterre B 552 100 984
Torched Paradial S top-layer
Ballast
Torched Paradial S top-layer Torched Parequerre reinforcement angle Siplast Primer