Solvent free glue
Icopal SFT Adhesive - single component solvent free adhesive
Environmental-friendly: solvent free No labels regarding sensitizing and toxicity Quick drying Watertight Suitable for various substrates High resistance to water, grease, and climatic variations High wind uplift performances when applied as glue for insulation boards Low consumption rate
Icopal SFT Adhesive Single component solvent free adhesive Description
Packaging
ICOPAL SFT ADHESIVE is an Eco-Activ glue: black in colour, the product is a single component, non toxic and solvent free, specially formulated for watertight adhesion, complete bonding or details (sidelaps, endlaps, upstands).
Product available in the following packaging:
ICOPAL SFT ADHESIVE is a blend of proprietary polymers and modifiers, engineered to cure completely in a wide variety of ambient conditions on various substrates.
Volume Icopal SFT Adhesive Cardridge
300 ml
Icopal SFT Adhesive Sausage
600 ml
Icopal SFT Adhesive Can
4 kg
Icopal SFT Adhesive Bucket
14 kg
Preparation of the support The substrates must be clean, dry, oil and grease free.
Minimal packaging to reduce waste after application. For more information, please consult the Product Technical Information.
Use and application ICOPAL SFT ADHESIVE can be used as an adhesive for indoor or outdoor, over: Various kinds of bearing elements such as galvanised steel and wood; Bituminous waterproofing membranes; Insulation boards. The support doesn’t need to be covered with a bituminous primer before application of ICOPAL SFT ADHESIVE. Application from cartridge/sausages is made with appriopriate hand guns (cords). ICOPAL SFT ADHESIVE can also be installed from the buckets or from the cans with a notched spatula (notches of 2 mm spaced by 2 mm) for full bonding area.
Cleaning
Product yield Low consumption rate. Exemple of application: bonding of insulation boards: Kind of support
Consumption (g/m²)
Wood
150(*) to 250(**)
Steel
(*) bonding by cords of 50g / cord 10 to 15 mm wide (3 cords per board 600 x 1200 mm). (**) bonding by studs of 50 g / stud (5 studs per board 600 x 1200 mm)
Bituminous waterproofing membrane
This document is only a guide. Siplast-Icopal reserves the right to change the composition and fixing recommendations of products as a result of evolution of knowledge and technology.
An Icopal Group Company
ICOPAL SAS | 12, rue de la Renaissance | F - 92184 Antony | Tel. +33 (0)1 40 96 35 00 | Fax. +33 (0)1 46 66 24 85 | www.siplast-international.com
N1-1 09/13 – Photos : Icopal | R.C.S. Nanterre B 552 100 984 – Pictures are not contractual
Use a dry cloth for cleaning the application tools that have come into contact with ICOPAL SFT ADHESIVE, before curing.