Waterproofing Solutions
Icopal Group Icopal is the world leader in building protection from the roof right down to the basement. Icopal is a worldwide partner with a network of local sales offices and production locations.
Key figures of the Icopal Group: Turnover 2013: € 1,200 million Employees: 3,400 people Manufacturing sites: 36 Business presence on 6 continents
The Group has built its reputation on more than 160 years of expe-
Icopal is constantly striving to protect the environment and has set
rience in roofing and waterproofing and focuses on maintaining its
recycling and minimizing the use of raw materials and energy as top
position as the world reference in the roofing and waterproofing
priorities in the development and production of roofing and water-
industry with such strong trademarks as Siplast for bituminous
proofing solutions.
roofing products and geomembranes.
The Group aims to provide the highest quality products in the buil-
Icopal has significant technological know-how and long experience
ding sector and as a result has been awarded several notable cer-
in international markets. It provides high quality service which best
tifications that are recognised by specifiers, government authori-
meet customers’ needs and challenges in their local context.
ties, and building control bodies.
Siplast was established in France in 1955 and counts numerous achievements and innovations in the field of bitumen membranes for roofing and waterproofing for buildings and civil engineering.
Siplast became a member of the Icopal Group in 1989 and currently has sales offices in Italy, Spain, Algeria and Japan. An Export division of Siplast deals directly with customers from all other countries worldwide.
Siplast pioneered the manufacture of SBS modified bitumen roofing.
Contents Flat roof - Products Bituminous SBS membranes for single-layer waterproofing systems
4
Flat roof - Products Bituminous SBS membranes for multi-layer waterproofing systems
6 6
18 Flat roof - Products Synthetic FPO membranes for single-layer waterproofing systems 18 Accessories 18 Ballasted system 19 Adhered system 19 Mechanically fastened system 19
Flat roof - Single-layer systems Concrete deck non accessible roofs Concrete deck non accessible roofs
8 8 9
Liquid waterproofing Sealoflex Waterbased waterproofing system Coating and other liquid products
Flat roof - Single-layer systems Concrete deck non accessible roofs Concrete deck accessible roofs for pedestrian
10 10 11
Flat roof - Multi-layer systems Concrete deck non accessible roofs Concrete deck accessible roofs
12 12 13
Slope roof 22 Shingles 22 Design 3D membranes 22 23 Breather membrane Accessories 23
Flat roof - Products Other product used in the SBS bitumen systems Bituminous APP membranes for multi-layer waterproofing systems
14 14
4
15
16 Flat roof - Products Synthetic PVC membranes for single-layer waterproofing systems 16 Accessories 16 17 Ballasted system 17 Adhered system Mechanically fastened system 17
20 20 21
Foundations over water table 24 Foundation solutions and primer 24 Building references Bitumen, liquid and synthetic references
25 25
26 Civil Engineering Bridges 26 Environmental protection works 27
3
Flat roof - Products Bituminous SBS membranes for single-layer waterproofing systems
P roduct
description and selection guide
ADESOLO G Dark Grey 30
Single layer
SBS elastomeric bitumen reinforced membrane used as a single layer in a self-adhesive waterproofing system for exposed roofs.
PARAFOR SOLO GFX Dark Grey 30
Single layer
SBS elastomeric bitumen membrane for mechanical fixing in single layer systems. Mostly used for non-accessible roof on steeldeck on insulation board.
PARAFOR SOLO GS
Top layer
A reinforced, polymer-modified SBS bitumen sheet with mineral granule or slate-finished upper surface and a macro perforated thermofusible film under surface. Available in Red Bauxite 52, Grey 30 and Green Lichen 64.
TERANAP JS
Single layer
A reinforced, SBS elastomeric bituminous membrane with double joint, for single layer waterproofing of inaccessible roofs with gravel ballast or on terraces accessible to pedestrians with paving slabs.
4
Product characteristics
Reinforcement
Glass/polyester 180 g/m
2
Glass fibre 50 g/m
2
Polyester 180 g/m
2
Surface finishing
Top face: mineral granules or slates Under face: self adhesive strips protected by film
Top face: mineral granules or slates Under face: film
Top face: mineral granules or slates Under face: film
Non woven polyester
Top face: Polyester film
180 g/m2
Under face: sand
Nominal thickness/ Weight 5 mm 6.4 Kg/m2
4,8 mm 6.0 Kg/m2
5 mm 6.2 Kg/m
2
4 mm 4.99 Kg/m2
Accessible roof
Non accessible roof
Roll dimension
on substrate without insulation
on substrate without insulation
7x1m
X
7x1m
X
7x1m
8x1m
under heavy protection consult the system composition
system page 11
system page 8
with insulation consult the system composition
system page 9
system page 10
5
Flat roof - Products Bituminous SBS membranes for multi-layer waterproofing systems
P roduct
description and selection guide
ADEPAR JS
Base layer
An SBS-modified, reinforced bitumen membrane, for use as a first layer in a two-layer, partially bonded built-up roof waterproofing system.
PARADIENE JS R4
Base layer
An SBS elastomeric bitumen membrane with self-adhesive side laps for use as underlayer of a loose-laid two-ply system under heavy protection.
PARADIENE SVV FILM/GRES
Base layer
A reinforced, polymer-modified bitumen sheet, for use in two-layer, built-up waterproofing systems as a base or loose-laid cap sheet with additional ballast protection.
PARADIENE SVV FILM/FILM
Base layer
A reinforced, polymer-modified SBS bitumen sheet for use as a base or loose laid cap sheet with additional ballast protection.
PARADIENE SR4 FILM/FILM
Base layer
PARADIENE R4 FILM/GRES
Base layer
A reinforced, polymer-modified SBS bitumen sheet for use as a base sheet or cap sheet with additional protection.
A polymer-modified bitumen sheet finished for use as a base sheet or cap sheet with additional protection.
PARADIENE 35 S R4
Base layer
A polymer-modified SBS bitumen sheet for use as a base sheet or cap sheet with additional protection.
PARADIENE 30.1 GS
Top layer
SBS elastomeric bitumen reinforced membrane with self protected coloured granules for waterproofing of inaccessible roofs, for use as top layer of two-layer system self protected or under heavy protection.
PARAFOR 30 GS
Top layer
A reinforced, polymer-modified bitumen sheet with coloured mineral granule-finishing, for use as a cap sheet. Available in Grey 30 and Green Lichen 64.
PARAFOR SOLO GS
Top layer
A reinforced, polymer-modified bitumen sheet with coloured mineral granule or slate-finishing and a macro perforated thermofusible film under surface, for use as a cap sheet. Available in Red Bauxite 52, Grey 30 and Green Lichen 64. Consult with us for the complete colour range and availability. Consult with us for the solutions validated with BBA certification and any other systems that are not described in this document. 6
Product characteristics
Reinforcement Polyester composite 140 g/m2
Non woven polyester 180 g/m2
Glass fibre 50 g/m2
Glass fibre 55 g/m2
Non woven polyester 180 g/m2 Non woven polyester 180 g/m2 Non woven polyester 180 g/m
2
Glass mat
180 g/m2
on substrate without insulation
Nominal thickness/ Weight*
Roll dimension
on substrate without insulation
Top face: macro-perforated fusible film and self-adhesive side overlapping Under face: self adhesive strips protected by film
2.65 mm
10 x 1 m
X
Top face: sand and self-adhesive side overlapping Under face: self adhesive strips protected by film
2.65 mm
7.5 x 1 m
Top face: sand Under face: sand
2.6 mm
7.5 x 1 m
Top face: sand Under face: sand
2.6 mm
7.5 x 1 m
Top face: film Under face: film
2.6 mm
7.5 x 1 m
Top face: film Under face: sand
2.6 mm
7.5 x 1 m
Top face: film Under face: sand or film
3.7mm
5x1m
Top face: mineral granules or slates
Top face: mineral granules or slates
3,4 mm 4.2 Kg/ m2
3.8 mm
Top face: mineral granules or slates
180 g/m
Under face: film
5 mm 6.2 Kg/ m2
system page 13
system page 13
system page 13
system page 13
system page 13
system page 13
X
10 x 1 m
system page 12
consult the system composition
consult the system composition
consult the system composition
consult the system composition
consult the system composition
consult the system composition
system page 12
8x1
7x1
Under face: film
Non woven polyester 2
Non accessible Roof
Surface finishing
Under face: film Non woven polyester
Accessible roof
consult the system composition
consult the system composition
consult the system composition
consult the system composition
*: Consult the most recent technical data sheets for exact values. 7
Flat roof - Single-layer systems Concrete deck non accessible roofs Self-adhesive SBS elastomeric bitumen single layer waterproofing system Slope ≼ 2 %
Adesolo G
5
2
3
4
1
8
1
Siplast Primer SBS bitumen primer.
2
Upstands: Siplast Primer SBS bitumen primer.
3
Upstands: torched Parequerre reinforcement angle.
4
Self-adhesive Adesolo G: single layer adhesive membrane + torched overlaps.
5
Upstands: torched Paradial S top layer.
Concrete deck non accessible roofs Torched-applied SBS elastomeric bitumen single layer waterproofing system Slope ≼ 2 %
Perfader + Parafor SOLO GS
6
2
3
5 1
4
1
Siplast Primer SBS bitumen primer.
4
Perfader perforated underlay for partial bonding loose-laid.
2
Upstands: Siplast Primer SBS bitumen primer.
5
Torched single-layer Parafor SOLO GS.
3
Upstands: torched Parequerre reinforcement angle.
6
Upstands: torched Paradial S top layer.
9
Flat roof - Single-layer systems Concrete deck non accessible roofs Loose-laid SBS elastomeric bitumen single layer waterproofing system
Slope 0 - 5 %
Teranap JS
Inverted roof
5
1
9
4
8 7 6 3 2
1
Siplast Primer SBS bitumen primer.
6
Loose-laid Verecran 100 separating layer.
2
Loose-laid Verecran 100 separating layer.
7
Insulation board.
Loose-laid Teranap JS single layer with self adhesive overlap .
8
Loose-laid Verecran 100 separating layer.
Torched Parequerre reinforcement angle.
9
Gravel ballast.
3
4
5 10
Upstands: torched Paradial S.
Concrete deck accessible roofs for pedestrian Loose-laid SBS elastomeric bitumen single layer waterproofing system
Slope 1,5 - 5 %
Teranap JS + Draina G10
Inverted roof
5
1
11 10
4
8
9
7 6 3 2
1
Siplast Primer SBS bitumen primer.
7
Insulation board.
2
Loose-laid Verecran 100 separating layer.
8
Loose-laid Verecran 100 separating layer.
3
Loose-laid Teranap JS single layer with self adhesive overlap.
9
Draina G10 drainage embossed underlayer loose laid.
4
Torched Parequerre reinforcement angle.
10
Heavy cement screed.
5
Upstands: torched Paradial S.
11
Uptand with wire mesh cement mortar.
6
Loose-laid Verecran 100 separating layer. 11
Flat roof - Multi-layer systems Concrete deck non accessible roofs Self-adhesive SBS elastomeric bitumen double layer waterproofing system Slope ≼ 2 %
Adepar JS + Paradiene 30.1 GS
6 2 4 5
1
12
3
1
Siplast Primer SBS bitumen primer.
4
Upstands: torched Parequerre reinforcement angle.
2
Upstands: Siplast Primer SBS bitumen primer.
5
Torched on top layer Paradiene 30.1 GS.
3
Self-adhesive Adepar JS.
6
Upstands: torched Paradial S top layer.
Concrete deck accessible roofs Torched-applied SBS elastomeric bitumen double layer waterproofing system Slope 1,5 - 5%
Paradiene JS R4 + Paradiene SVV + Draina G10
1
6
4
9 8 7 3
5
2
1
Upstands: Siplast Primer SBS bitumen primer.
6
Upstands: torched Paradial S top layer.
2
Loose laid Verecran 100 separating underlayer.
7
Draina G10 drainage embossed underlay (loose laid).
3
Loose laid Paradiene JS R4 underlayer + torched overlaps.
8
Heavy cement screed.
4
Upstands: torched Parequerre reinforcement angle.
9
Uptand with wire mesh cement mortar.
5
Torched Paradiene SVV top layer.
13
Flat roof - Products Other product used in the SBS bitumen systems Product description
Perfader Perforated oxidized bitumen base sheet designed for partial bonding waterproofing underlay for granule finished systems for inaccessible roofs.
Parequerre Polyester-reinforced angle in SBS modified elastomeric bitumen with a heavy non woven polyester fleece for upstands.
Paradial S SBS elastomeric bitumen roofing membrane protected by embossed thermo-stable aluminium foil used for upstands, gutters and roof details.
Draina G10 Drainage embossed membrane in polypropylene covered with a permeable non woven polyester filter layer to be interposed between waterproofing and heavy ballast.
Reinforcement
Surface finishing
Glass fibre
Top face: sand
60 g/m2
Under face: film
Polyester
Glass grid/glass mat
Polyester/glass fibre
Top face: sand Under face: film
Top face: aluminium foil
Weight
Roll dimension
1.0 Kg/m2
20 x 1 m
4.6 Kg/m2
10 x 0.25 m
4.1 Kg/m2
8x1m
0.9 Kg/m2
15 x 1 m
0.1 Kg/m2
50 x 1 m
Under face: film
Top face: non woven polypropylene filter Under face: polypropylene
Verecran Glass fiber separation layer used to allow a loose laid bituminous membrane application over concrete on roofs under heavy protection.
14
Glass fleece
Glass fleece
Bituminous APP membranes for multi-layer waterproofing systems Product description
Pioneer 3 Kg
Weight
Polyester/glass fibre
3 Kg/m2
Polyester/glass fibre
4 Kg/m2
Polyester/glass fibre
4 Kg/m2
Polyester/glass fibre
3.5 Kg/m2
Surface finishing
Base layer
APP modified bitumen membrane, with composite reinforcement used as first layer for a multilayer non exposed waterproofing systems under ballast or under a cap sheet membrane.
Pioneer 4 Kg
Reinforcement
Top face: sand Under face: film
Base layer
APP modified bitumen membrane, with composite reinforcement used as first layer for a multilayer non exposed waterproofing systems under ballast.
Pioneer 4 Kg Film/film
Base layer
APP modified bitumen membrane, with composite reinforcement used as top layer for a multilayer exposed waterproofing system.
Pioneer GS 3,5 kg Grey
Top layer
APP modified bitumen membrane, with composite non woven spunbound polyester and glass fibre reinforcement used as top layer for a multilayer exposed waterproofing system.
Pioneer GS 4 kg Grey
Pioneer GS 4,5 kg Grey
Polyester/glass fibre
4 Kg/m2
Top face: film Under face: film
Top face: mineral granule
Top face: mineral granule Under face: film
Top layer
APP modified bitumen membrane, with composite reinforcement used as top layer for a multilayer exposed waterproofing system.
Under face: film
Under face: film
Top layer
APP modified bitumen membrane, with composite reinforcement used as top layer for a multilayer exposed waterproofing system.
Top face: sand
Polyester/glass fibre
4.5 Kg/m2
Top face: mineral granule Under face: film
15
Flat roof - Products Synthetic PVC membranes for single-layer waterproofing systems P roduct
description
Monarplan FM A polyester reinforced membrane designed specifically for use within mechanically fixed applications. The non-wick polyester fabric gives the membrane inherent tensile strength which is required to facilitate the use of steel fasteners to restrain the system against wind uplift. Mechanically fixed systems can be cost effective solutions, and are ideal where lightweight constructions are considered. Colours: white, grey.
Monarplan G Membrane with a glass reinforcement encapsulated between two layers of extruded PVC. The membrane is manufactured with a fungicidal additive and is specifically designed for use within ballasted or green roof constructions where the membrane is buried. Monarplan G is resistant to micro organism attack and can provide a long lasting waterproof solution for roof areas that need to be waterproofed fast. Colour: grey.
Product characteristics Thickness 1.2 mm 1.5 mm 1,8 mm 2.0 mm
Roll widths 1.06 m 1.65 m 2.12 m
1.2 mm 1.5 mm
2.12 m
Roll lengths 15 m (for 1.2 mm, 1,8 mm, 2.0 mm thickness) 20 m (for 2.00 mm thickness) 15 m (for 1.5 mm, 1,8 mm, thickness) 20 m (for 1.2 mm thickness)
1.8 mm
Monarplan GF A glass reinforced PVC membrane incorporating a polyester fleece backing. The factory laminated polyester backing allows the membrane to be fully adhered to the underlying substrate using a compatible cold applied adhesive and can be the ideal solution on curved, steep or undulating roof designs that prove challenging for other systems. Colour: grey.
1.5 mm + fleece
2.12 m
15 m
1.06 m
15 m
Monarplan W Walkway Membrane Monarplan Walkway Membrane is a weather resistant PVC membrane which is anthracite in colour and incorporates an embossed, non-slip, interlocking herringbone tread pattern.
1.5 mm
Accessories
Monarplan Prefabricated Corners Prefabricated corners aid speed of installation on site, and are used to reinforce internal and external corners with no stretching or cutting required. Colours: Grey, White.
Monarplan D Unreinforced Flashing The Monarplan D unreinforced flashing is to be used in the formation of internal/ external corners, field fabricated pipe flashings, sealant pockets and scuppers, when the use of pre-moulded accessories are not feasible.
Monarplan PVC LIQUIDE PVC liquid paste mixed with THT for finishing of weldings. Can: 1.25 L
Monarplan SOLVANT THF THF based solvent for chemical cold welding. Can: 1.25 L
Monarplan COLLE CONTACT Strength solvent based contact adhesive that allows the bonding of Monarplan速 non-fleeceback membrane to various porous and non-porous substrates. The adhesive provides instant contact adhesion and is particularly useful at details such as upstands and abutments. Can: 10 L
Monarplan PVC coated metal sheet Hot dipped galvanised steel sheet of 0.6 mm coated with a layer of 0.6 mm nonreinforced PVC film for an overall thickness of 1.2 mm. The sheet is cut into appropriate widths and used to fabricate metal drip edges or other roof perimeter edging profiles. Dimensions 2 x 1 m. 16
Ballasted system The Monarplan PVC G membrane is loose-Iaid and welded together at the overlaps prior to the application of the ballast which holds the membrane in place. This method offers maximum restraint to wind uplift and fast application times, while providing protection from mechanical and solar/UV damage. A separation layer (PE foil) is required and an additional protection layer may be required beneath the ballast material to protect the underlying layers from damage.
Paving on support/ballast
Icopal protection fleece Monarplan速 G reinforced membrane Insulation board Icopal Vapour Control Layer
Structural concrete deck
Adhered system Fully adhered systems are more commonly used above concrete substrates where the process of installing mechanical fixings is invasive and labour intensive. Fully adhered systems are reliant upon suitable weather conditions (which should be considered). However, complex geometries and pitched surfaces can be accommodated with great success. Fully adhered membranes can also provide a superior surface finish.
Monarplan速 GF Fleeceback membrane Icopal Fleeceback Adhesive Insulation board Icopal Insulation Adhesive (TK 395) Icopal Vapour Control Layer Structural Deck
Mechanically fastened system Mechanically fixed systems are often favoured above timber or metal decks where the exposure of the fastener on the underside of the structure is not a consideration. This method of application involves the use of thermally broken fasteners fixed at pre-determined centres and is a fast and cost effective method of installing the single ply membrane which is less dependent upon amicable weather conditions.
Monarplan速 FM membrane Fasteners Insulation board Icopal Vapour Control Layer Structural deck
17
Flat roof - Products Synthetic FPO membranes for single-layer waterproofing systems Product characteristics
P roduct
description
Monarfin FM Polyester reinforced polyolefin membrane designed specifically for use within mechanically fastened applications.
Thickness
1.2 mm 1.5 mm
Roll widths
Roll lengths
1.06 m
20 m for 1.2 mm thickness
1.50 m 2.12 m
15 m for 1.50 mm thickness
1.5 mm
2.12 m
15 m
1.5 mm
2.12 m
15 m
1.5 mm
1.40 m
15 m
Monarfin GF Glass reinforced polyolefin membrane incorporating a polyester fleece backing specifically designed for use in a part mechanically fixed/part adhered system or alternativly fully adhered to the underlying substrate using a compatible cold applied adhesive.
Monarfin G Glass reinforced polyolefin membrane specifically designed for use within ballasted inverted, ballasted warm roof or green roof constructions where the membrane is buried.
Monarfin D Un-reinforced FPO membrane for details to be formed on-site.
Accessories Monarfin Prefabricated Corners Prefabricated corners aid speed of installation on site, and are used to reinforce internal and external corners with no stretching or cutting required.
FPO Contact Adhesive High strength solvent based contact adhesive that allows the bonding of Monarfin速 nonfleeceback membrane to various porous and non-porous substrates. The adhesive provides instant contact adhesion and is particularly useful at details such as upstands and abutments. Can: 20 L.
Monarfin W Red weather resistant FPO membrane which incorporates an aggressive, non-slip, interlocking herringbone tread pattern. Roll dimensions: 15 x 0.74 m.
Monarfin速 Coated Metal sheet Hot dipped galvanised steel sheet of 0.6 mm coated with a layer of 0.6 mm non reinforced FPO film for an overall thickness of 1.2 mm. The sheet is cut into appropriate widths and used to fabricate metal drip edges or other roof perimeter edging profiles. Dimensions 2 x 1 m.
Icopal Fleeceback Adhesive Terokal TK 3958 is a high strength, single component moisture curing polyurethane adhesive that has been formulated for bonding fleece-backed single ply roofing membranes to various substrates including suitable roof insulation panels.
Monarfin速 membrane cleaner Can 5L 18
Ballasted system The Monarfin G membrane is loose-Iaid and welded together at the overlaps prior to the application of the ballast which holds the membrane in place. This method offers maximum restraint to wind uplift and fast application times, while providing protection from mechanical and solar/UV damage. A separation layer (PE foil) is required and an additional protection layer may be required beneath the ballast material to protect the underlying layers from damage.
Paving on support/ballast Icopal protection fleece Monarfin速 G reinforced membrane Insulation board Icopal Vapour Control Layer Structural concrete deck
Adhered system Fully adhered systems are more commonly used above concrete substrates where the process of installing mechanical fixings is invasive and labour intensive. Fully adhered systems are reliant upon suitable weather conditions (which should be considered). However, complex geometries and pitched surfaces can be accommodated with great success. Fully adhered membranes can also provide a superior surface finish. In adhered systems the Monarfin速 membrane is attached to the substrate using an adhesive. The adjacent sheets of membrane are then welded.
Monarfin速 GF Fleeceback membrane Icopal Fleeceback Adhesive Insulation board Icopal Insulation Adhesive (TK 395) Icopal Vapour Control Layer Structural Deck
Mechanically fastened system Mechanically fixed systems are often favoured above timber or metal decks where the exposure of the fastener on the underside of the structure is not a consideration. This method of application involves the use of thermally broken fasteners fixed at pre-determined centres and is a fast and cost effective method of installing the single ply membrane which is less dependent upon amicable weather conditions.
Monarfin速 FM membrane Fasteners Insulation board Icopal Vapour Control Layer Structural deck
19
Liquid waterproofing Sealoflex Waterbased waterproofing system Sealoflex® Waterbased waterproofing system applies easily to awkward areas e.g. penetrations, vents, skylights. It is used: • As a low and steep slope roof waterproofer • For flashings of all types • As parapet wall and coping waterproofer • For sealing of joints, laps and fasteners on corrugated metal roofs • For standing seam metal and all other type metal roofs • Over existing roof systems • As a waterproof coating for exterior walls • As a waterproofer on decks
Finish coat
Sealobond WB Pink Sealoflex 10 Fabric Sealobond WB Pink
Sealobond primer WB
Products
Packaging
Sealobond primer WB
Primer for concrete, masonry, chalky surfaces, latex paint, polyurethane coatings, synthetic stucco.
Drum 20 L
Sealoflex WB Pink
Waterborne, single component acrylic coating. It cures to a tough rubber like material, which displays excellent adhesion and flexibility. Sealoflex Pink®, generally used along with Sealoflex Fabric™ and Sealoflex Finish Coat™ forms a fully adhered single ply roofing membrane.
Can 20 L
Sealoflex 10 Fabric
Polyester, non-woven, stitch-bonded and heat set fabric that is used for roof panel joints, flashings and other details, flat, smooth roofs. It conforms readily to uneven surfaces.
Finish coat white* Finish coat Slate Grey**
*: Energy Star certification **: Factory Mutual certification 20
Description
Waterborne, single component roof coating. It is a tough, flexible material, which displays excellent UV and ozone resistance, it is generally used in conjunction with Sealoflex Pink® and Sealoflex Fabric™ to form a fully adhered single ply roofing membrane. Sealoflex Finish Coat™ is also used extensively as a protective coating to existing and new roofing materials such as single ply, modified asphalt membranes, and metal roofs.
Roll dimension: 1 m x 30 m
Can 20 L
Coating and other liquid products Products
Description
Packaging
Paracoating Eco-Activ
Liquid sealant made of MS polymer, designed to waterproof gutters, planters,localised areas and channels. It forms a homogenous, elastic waterproof and anti-roots film. It is solvent-free, single component, ready to use and quickdrying. Perfect for planted areas, roofs and terraces.
ReflectoWhite*
Highly Reflective Protective Roof Coating, waterborne, single component. It is a tough, flexible material, which displays good UV and ozone resistance. ReflectoWhite™ is used as a protective coating to existing roofing materials such as single ply, modified asphalt membrane and metal roofs. Creates a Cool Roof effect protecting the roof from excessive sun heating.
Can 20 L
Silver Primer
Liquid aluminium varnish with synthetic copolymers and a SBS bitumen blend, for bituminous roofing renovation and metal finishings.
Can 17.5 L
Renov’Paint Fibers
Renov’Paint Fibers is a waterproofing treatment for roofs, terraces, detailing and penetrations. The product is an elastomer copolymer based paint with fibres, for easy application with high elasticity.
Can 4 Kg Can 14 Kg
Can 4.6 L Can 21 L
*: Energy Star certification
21
Slope roof
Shingles Monartop Garden
Bitumen shingle with a glass-fiber reinforcement, 4 rectangular tabs, coloured mineral protection, underface protected by sand. Packaging: pallet of 60 m 2 . Dimensions Monartop Garden
Length
Width
1000 mm
360 m
Volcanic Grey
Chestnut Brown
Orange
Green
Design 3D membranes Membrane IRT 3D 4.2 mm Classic Red
Elastomeric bitumen waterproofing membrane with slate coloured granule protection and roof tiles appearance. The 3D effect gives the product a relief and depth perspective, perfectly imitating the appearance of traditional tiles. The Membrane IRT 3D is light-weight and particularly suitable for refurbishing roofs previously made from bituminous membranes or shingles and also for new builds. Single-layer application for slopes up to 85째. Roll dimensions Membrane IRT 3 D
22
Length
Width
8m
1.00 m
Breather membrane Monarperm 500
A highly vapour-open film bonded between two layers of non woven polypropylene forms the breather underlay for ventilated and non ventilated pitched roofs and walls. Avoid risks of condensation or moisture damages and ensure wind protection. • Upper side: grey anthracite • Lower side: light grey. • Weight: 100 g/m2 • Sd = 0.04 m Dimensions rolls Length Width Monarperm 500
50 m
1.00 m
Accessories Adealu Bands
Modified adhesive bitumen tape surfaced with a composite natural aluminium-polyester foil. The product is used for finishing of waterproofing details as minor repairs of flat roofs, pitched roofs or walls.
Roll dimensions Adealu Bands
Length 10 m
Widths 10 cm
15 cm
20 cm
30 cm
Paraflash
Flexible waterproof flashing in SBS modified bitumen on a malleable aluminium mesh finished with a fine grey granular finish on the outer face and a polyethylene film on the inner face. It’s suitable for all types of flashing including stepped abutments, chimneys, rooflights and flat or pitched roofing terminations. Malleable, easy to cut and install. Roll dimensions Paraflash
Length 10 m
Widths 15 cm
20cm
30 cm
95 cm
23
Foundations over water table Foundation solutions and primer
Primer
Foundation mMembranes
Coating
Products
24
Description
Packaging
Fondacoat
Water based rubber modified bitumen coating, ideal for rough or porous surfaces. No solvent, safe for use in confined areas, no fire risk or dangerous vapours.
Fondafor
Torchable SBS elastomeric bitumen membrane for exterior waterproofing of underground walls. Single ply application. Membrane top surface with slate flakes, under face with fusible film. Contains anti-root additive.
Roll dimensions: 8 m x 1 m
Adeti Premium
Self-adhesive SBS elastomeric modified bitumen membrane for belowgrade walls above the water-table. The top surface is covered with black HPDE foil UV resistant and a release film in underface.
Roll dimensions: 20 m x 1 m
HDPE studded membrane for protection and vertical drainage of structural below-grade walls.
Roll dimensions: 30 m x 1 m, 30 m x 1.5 m, 30 m x 2 m, 30 m x 2.5 m
Prim’Nap
Siplast Primer
Drum 5 Kg Drum 20 Kg
Cold impregnation coating made with elastomeric modified bitumen and hydrocarbon solvent with a short drying time to be used as a primer for all Drum 10 L types of substrates and decks, (concrete, wood) in buildings and civil engi- Drum 25 L neering (bridgedeck waterproofing).
Building references Bitumen, liquid and synthetic references
25
Civil Engineering
Bridges P roduct
Product characteristics
description
Reinforcement
Surface Nominal Roll finishing thickness dimensions
Parafor Ponts SBS elastomeric bitumen compound membrane with a high performance non woven polyester reinforcement and surfaced with white ceramic granules. To be used in single-layer system fully-torched onto the bridge deck including the Siplast Primer and the Parafor Ponts membrane. The membrane directly receives the wearing course (bituminous mix). New! Available now with Echo-Detect Radar technology for civil engineering: this system is composed of a 2 cm wide and 12 μm thick polyester aluminized stripe integrated inside the membrane that allows the location and identification of bituminous waterproofing membranes under the wearing course. The Echo-Detect technology enables bridge detailed analysis for preliminary diagnosis before the maintenance work for wearing courses and waterproofing membranes.
non woven polyester 180 g/m2
Top face: ceramic granules Under face: film
4,8 mm
8x1m 150 x 1 m
Main uses
• Waterproofing of road-bridge decks. • Waterproofing of slabs used to cap “cut & cover” trenches. • Waterproofing of concrete decks for car parks.
INTERNATIONAL REFERENCES OF PARAFOR PONTS
26
Belgium Zaventem International Airport, Brussels - 22,000 m² Bulgaria Varna bridge, Varna - 10,00 0m² Croatia Maslenica bridge, Zadar area - 9,000 m² Posedarje viaduct - 4000m² Czech Republic Slab on the metro tunnel, Praha - 10,000 m² France & French Overseas Territories Millau Viaduct Bridge on the A75 motorway 70,000 m² Cheviré bridge near Nantes, Loire-Atlantique 40,000 m² Eschau Rhein Bridge, Germany-France border 20,000 m²
Indian Ocean Bridges, West coast of La Reunion Island - 4,500 m² Indonesia Djakarta International Airport, Djakarta - 30,000 m² Iran Urumieh Bridge - 18,000 m² Morocco Tahadart Bridge - 10,000 m² Nederland Oosterschelde dam bridge, Escaut estuary 12,000 m² Van Brienennordbrug - 12,000 m² Koningspilijbrug - 18,000 m² Haringulerttbruggen - 23,000 m²
Poland Bridge over Jywiec Lake, - 9,300 m² Bridge over Vistula river, Grudzijdz - 8,700 m² Qatar New International Airport-Doha - 40,000 m² Romania Craiova by-pass - 8,000 m² Tunisia Rades Bridge - Tunis - 40,000 m² U.A.E. Zayed Sports City, Abu Dhabi - 26,000 m² Vietnam Restoration of Eiffel bridge, Ho Chi Minh City 5,000 m² New concrete bridge, Haiphong area - 4,000 m² New concrete bridge, Phu Long - 18,000 m²
Environmental protection works P roduct
Product characteristics
description
Teranap TP
Surface Nominal finishing thickness
Reinforcement
Roll dimensions
Large-width manufactured SBS elastomeric bitumen geomembrane reinforced with a non-woven polyester geotextile with high resistance to aging and puncturing. Resistance to root penetration and to numerous chemical agents.
Main uses
Teranap TP 331 2 m
non woven polyester
Teranap TP 331 4 m
180 g/m2
Teranap TP 431 2 m
non woven polyester
Teranap TP 431 4 m
250 g/m
Teranap TP 531 4 m
non woven polyester 180 g/m + glass mat 50 g/m2
• Hydraulic works. • Canal lining, retention pounds, waster water management. • Mining wastes containment and landfills. • Tailings, heap leach pads. • Industrial reservoirs and storage tanks.
Top face: sand
2 2
Under face: root resistant film
3 mm
20 x 2 m
3.6 mm
100 x 4 m
4 mm
20 x 2 m
4.1 mm
80 x 4
4.8 mm
65 x 4 m
• Transportation infrastructures • Tunnels, cut and cover trenches • Construction • Tanking
INTERNATIONAL REFERENCES OF TERANAP TP
Algeria Finland Morocco Oued Souf Valley /Sewage lagoon - 300,000m² Kittila Gold mine - 1,000,000 m2 El Halassa phosphate mine wash plant - 100,000 Natural sewage treatment station in Ghardaia - France m² 600,000 m² Salsigne Gold Mine rehabilitation - 110,000 m² USA Argentina Mont Saint-Michel wastewater plant - 50,000 m2 Canal of Sacramento Valley- 97,000 m2 Cerro Negro Goldcorp Oroplata Gold mine JUANON WATER TANK - 110,000 m2 Rockefeller Plaza New York/ Underground works 513,000 m2 OCQUERRE basin - 30,000 m2 - 20,000 m2 Australia Sugar refinery, Bazancourt - 120,000 m2 Canal Casper Alcova, Wyoming - 69,000 m2 Morwell Main Drain Rehabilitation - 23,000 m2 Basins on A7 Highway road - 30,000 m2 Canada Basins on A89 Highway road -120,000 m2 Sewage Treatment Lagoons at Dunnville, Ontario Basins on A61 Highway road - 35,000 m2 - 25,000 m2 Lime-kiln of Dugny -100,000 m2 Tailings Pond at Meadobank, Nunavut - 60,000 Cut and Cover A89 highway tunnel - 13,000 m2 m2 Cut and Cover of Gumont - 10,000 m2 Silverberry landfill, British Columbia 100,000 m2 Channel of Nieffer -250,000 m2 Landfill of Isseane - 4,000 m2 27
Your local partner:
This document is only a guide, Siplast reserves the right to modify the composition and the installation instructions of its products depending upon the evolution of knowledge and technology.
An Icopal Group Company
Edition 1 - April 2015 - Photo Siplast Icopal / GĂŠrard Cottet / Thierry ClĂŠment
Icopal SAS Export Department 12, rue de la Renaissance 92184 Antony Cedex France Tel: +33.(0)1.40.96.36.95 / +33.(0)1.40.96.35.26 siplast-international@icopal.com www.siplast-international.com