technopix New Zealand Ltd Suppliers of specialised LED products
Ribbon Strip Series 2
Specifications Rating: Ingress Protection—IP40 Materials & Length: Flexible White PCB Board 5metre Standard Different size lengths can be made to order or cut every 3 LEDs onsite using non-solder system
Ribbon Strip Series 2
3M 200MP - Self Adhesive Tape Voltage: 12 volt or 24 volt DC (made to order) Lamp: 120°SMD LED Lamp @ 15mm spacing LED Colours: Blue, Green, Red, Yellow, Warm White and White Warranty & Maintenance: •
Should be wiped clean and dried before use as required with a non-corrosive cleaning product such as diluted household dishwashing liquid.
Ribbon Strip Series 2 Warm White used under the bench
8 MM
2 Years
MODEL
VOLTAGE
Length of Strip
Wattage Per Length
AMPS Per length
RS2
12 - DC
1 Metre
4.8
.4
2 Metre
9.6
.8
3 Metre
12.0
1
4 Metre
14.4
1.2
5 Metre
15.6
1.3
2.5 MM
www.technopix.co.nz
Ribbon Strip Series 2
Disclaimer: While every care has been taken with the details of this specification sheet, Technopix NZ Ltd accepts no responsibility for any inaccuracies. Technopix NZ Ltd also reserves the right to change the specification without notice to continually ensure you receive a superior product.