Wireless Lighting Controls with Z-Wave Technology Control Your Home Lighting with the Touch of a Button!
GE’s Lighting Control products with Z-wave technology allow you to control individual or groups of lights with a compact remote control.
The GE 3-Way Dimmer Kit enables wireless control of on/off and dim functions of hard-wired incandescent lighting, and includes a primary dimmer switch and auxiliary switch for control of one light from two locations. The dimmer switches replace your current light switches, use your existing wiring, and provide Z-Wave wireless and manual control of overhead lighting. The primary dimmer switch includes an LED indicator light to easily locate the switch in a dark room. The kit is the ideal setup for lighting stairs, halls, and multi-entrance rooms.
The GE Duplex Receptacle enables wireless control of on/off functions for standard incandescent table and floor lamps, fluorescent table and floor lamps, and small appliances. The receptacle replaces your current electrical outlet, uses your existing wiring, and provides a Z-Wave enabled outlet for the lamp/ appliance that you would like to control and a regular pass-through AC outlet for other electrical devices. The receptacle requires in-wall installation with hardwired connections.
EASY SETUP! Start with a room or two and add more over time. 1. Select the lights you want to control 2. Identify the type of lighting; some examples are: • Light switch • Plug-in table or floor lamp 3. Select the appropriate GE Z-wave Lighting Control product, including a remote control 4. Install the GE Lighting Control products 5. Push the buttons on the remote, and then push the button on the light module. That’s it, you’re done!
Scenes: A scene lets you establish preset brightness levels for multiple Z-Wave controlled lights and then control them with one button. This is ideal for mood or task lighting. • Scene 1 could be the family room lights set to dim for watching TV. • Scene 2 could have the same lights set to a different brightness level for other activities like reading or entertaining
Groups: Multiple Z-Wave devices can be turned ON or OFF with a single command when they are placed into a Group. • One example would be grouping your porch light and exterior garage lights together so that they could automatically be turned ON at dusk and OFF at dawn. The GE Lamp Module enables wireless control of on/off and dim functions for standard incandescent table and floor lamps. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet. It provides a Z-Wave enabled outlet for the lamp you would like to control and a regular pass-through AC outlet for other electrical devices.
The GE Outdoor Module enables wireless control of on/off functions for all types of outdoor lighting. The weatherresistant housing with protective outlet cover provides one Z-Wave enabled outlet for the lighting that you would like to control. The module is ideal for outdoor seasonal lighting.
Z-Wave Wireless Lighting Control On/Off Switch Product: 45609 • • • • • •
Wirelessly control on/off functions of overhead lighting Provides Z-Wave wireless and manual control LED indicator light allows easy location of switch in dark room Requires in-wall installation with hard-wired connections Easily connects using existing wires Capable of controlling compact fluorescent lighting
SPECIFICATIONS
Power: 120 VAC, 60 Hz. Signal (Frequency): 908.42 MHz. Load ratings: Incandescent - Minimum Load: 40W, Maximum Load: 600W Motor – 1/2HP Resistive – 1800W Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C) For indoor use only. Complies with FCC and Industry Canada regulations UL Listed
Z-Wave Wireless Lighting Control Duplex Receptacle Product: 45605 • For use with standard incandescent lighting, fluorescent lighting, and small appliances • Wirelessly control on/off functions of table and floor lamps and small appliances • Receptacle contains one Z-Wave AC outlet and one standard AC outlet • Requires in-wall installation with hard-wired connections • Easily connects using existing wires SPECIFICATIONS
Power 120VAC, 60Hz Signal (Frequency) 908.42 MHz Maximum Load for the Z-Wave controlled outlet: 600W Incandescent, ½ HP Motor or 1800W (15A) Resistive Maximum load for both outlets; 1800W Resistive Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C) For indoor use only. Complies with FCC and Industry Canada regulations UL Listed
3-Way On/Off Kit Product: 45614
• Wirelessly control on/off functions of overhead lighting from two places • Kit includes primary switch and auxiliary switch for control of one light from two locations • Provides Z-Wave wireless and manual control • LED indicator light allows easy location of primary switch in dark room • Requires in-wall installation with hard-wired connections • Easily connects using existing wires • Ideal for lighting stairs, halls, and multi-entrance rooms • Capable of controlling compact fluorescent lighting
SPECIFICATIONS
Power: 120 VAC, 60 Hz. Signal (Frequency): 908.42 MHz. Load ratings: Incandescent - Minimum Load: 40W, Maximum Load: 600W Motor – 1/2HP Resistive – 1800W Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C) For indoor use only. Complies with FCC and Industry Canada regulations UL Listed
Z-Wave Wireless Lighting Control 3-Way Dimmer Kit Product: 45613 • For use with hard-wired incandescent lighting • Wirelessly control on/off and dim functions of overhead lighting from two places • Kit includes primary dimmer switch and auxiliary switch for control of one light from two locations • Provides Z-Wave wireless and manual control • LED indicator light allows easy location of primary switch in dark room • Requires in-wall installation with hard-wired connections • Ideal for lighting stairs, halls, and multi-entrance rooms. • Not for use with fluorescent lights or motors SPECIFICATIONS
Power: 120 VAC, 60 Hz. Signal (Frequency): 908.42 MHz. Minimum Load: 40W, incandescent lamps only. Maximum Load: 500W, incandescent lamps only. Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C) For indoor use only. UL Listed
Z-Wave Wireless Lighting Control Lamp Module Product: 45602
• • • • •
For use with standard incandescent lighting only Wirelessly control on/off and dim functions of table and floor lamps Module provides one Z-Wave AC outlet and one standard AC outlet Horizontal design doesn’t block additional receptacle outlet Not for use with fluorescent lights or motors
SPECIFICATIONS
Power 120VAC, 60Hz Signal (Frequency) 908.42 MHz Maximum load for the Z-Wave controlled outlet: 300 W Incandescent Maximum load for pass-through outlet: 1500W Maximum load for both outlets 15 Amps, 1800W Resistive Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C) For indoor use only. Complies with FCC and Industry Canada regulations UL Listed
Z-Wave Wireless Lighting Control Dimmer Switch Product: 45606 • • • • •
For use with hard-wired incandescent lighting Wirelessly control on/off and dim functions of overhead lighting Provides Z-Wave wireless and manual control LED indicator light allows easy location of switch in dark room Requires in-wall installation with hard-wired connections • Easily connects using existing wires • Not for use with fluorescent lights or motors
SPECIFICATIONS
Power: 120 VAC, 60 Hz. Signal (Frequency): 908.42 MHz. Minimum Load: 40W, incandescent lamps only. Maximum Load: 500W, incandescent lamps only. Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C) For indoor use only. Complies with FCC and Industry Canada regulations UL Listed
Z-Wave Wireless Lighting Control Outdoor Module Product: 45604 • For use with outdoor incandescent and fluorescent lighting • Wirelessly control on/off functions of outdoor lighting • Module provides one Z-Wave AC outlet • Weather resistant housing • Ideal for outdoor and seasonal lighting SPECIFICATIONS
Power 120VAC, 60Hz Signal (Frequency) 908.42 MHz Maximum Load 600W Incandescent, ½ HP Motor or 1800W (15A) Resistive Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 14 to 140° F (-10 to 60° C) For outdoor use in dry, damp or wet locations Complies with FCC and Industry Canada regulations UL Listed
Z-Wave Wireless Lighting Control Fluorescent Light & Appliance Module Product: 45603 • For use with standard incandescent lighting, fluorescent lighting, and small appliances • Wirelessly control on/off functions of table and floor lamps and small appliances • Module contains one Z-Wave AC outlet and one standard AC outlet • Horizontal design doesn’t block additional receptacle outlet SPECIFICATIONS
Power 120VAC, 60Hz Signal (Frequency) 908.42 MHz Maximum load for the Z-Wave controlled outlet: 600W Incandescent, ½ HP Motor or 1800W Resistive Maximum load for both outlets 15 Amps, 1800W Resistive Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C) For indoor use only. Complies with FCC and Industry Canada regulations UL Listed
SYSTEM CONTROLLERS
G
et the full advantage of complete home automation with the GE Z-Wave Home Theater Remote. The lightweight remote controls up to 232 individual Z-Wave devices, Z-Wave thermostats and 12 home theater devices for a complete
customized home solution. Users create and manage custom lighting schemes by controlling up to 18 individual lights, 18 groups and 18 scenes. The LCD menu screen allows for quick navigation of the remote features and easy-to-read command feedback, while the timer function allows for up to 18 timed events to be automatically activated in the home. Z-Wave Home Theater Remote Product: 45608 • • • • •
Control up to 232 Z-Wave devices including 18 individual lights 18 groups of lights 18 lighting scenes Adjust brightness levels of dimmable Z-Wave enabled lights • Create up to 18 timed Z-Wave events for automatic activation • Control multiple Z-Wave certified thermostats • Learning capability for A/V equipment not in the IR code base
Works with most brands of TVs, HDTVs and Home Theater components!
• Create custom macros for changing multiple A/V settings with one button • Embed Z-Wave lighting commands into your A/V macros so you can dim your lights at the same time your entertainment system switches to DVD playback • Requires four AAA batteries (not included) • Can use as primary or secondary Z-Wave controller
Z-Wave Wireless Lighting Control Remote Product: 45600 • Control your entire home from one remote • Turn on/off and adjust the brightness of Z-Wave enabled lights • Operates the on/off functions of Z-Wave enabled small appliances • Manage up to 18 individual lights, 18 groups, and 18 scenes • Create custom lighting groups and scenes • LED lights provide command feedbacks SPECIFICATIONS
SCENE 201 PM
908.42 frequency range for North America Requires three “AAA” Alkaline batteries, not included Complies with FCC and Industry Canada regulations
Z-Wave Wireless Lighting Control Advanced Remote Product: 45601 • Control your entire home from one remote • Turn on/off and adjust the brightness of Z-Wave enabled lights • Operates the on/off functions of Z-Wave enabled small appliances • Manage up to 18 individual lights, 18 groups, and 18 scenes • Create custom lighting groups and scenes • On-screen LCD menu provides easy navigation of features and command feedback • Program up to nine timed events with advanced timer • Controls Z-Wave enabled thermostats • Label function allows you to name lights, groups, and scenes SPECIFICATIONS
908.42 frequency range for North America Requires three “AAA” Alkaline batteries, not included Complies with FCC and Industry Canada regulations
Wireless Home Lighting Control System with Z-wave Z-wave is a radio frequency, mesh network technology specifically designed for use in residential lighting control. Every Z-Wave enabled wall switch, receptacle, plug-in module, etc. (device in the network) is capable of relaying commands and utilizes two-way communications to ensure reliable operation throughout the entire home. The open-air, line-of-sight transmission distance is up to 100 feet between devices. Actual performance in a home will depend on the number of walls between the remote controller and the destination device, the type of construction and the number of devices installed in the system (multiple devices result in more possible transmission routes). The device’s ability to relay commands and acknowledge receipt of commands makes Z-Wave an ideal solution for automating and controlling lighting systems.
PATIO MASTER SUITE
BREAKFAST ROOM
KITCHEN
GREAT ROOM
BATH GUEST ROOM/STUDY
GARAGE DINING PORCH
Specifications subject to change without notice.
LEADER • INNOVATOR • TRUSTED PARTNER
Licensed Products
10 E. Memorial Rd., Oklahoma City, OK 73114 T 405.752.0710 • 1 800.654.8483 • F 405.752.1251 www.jascoproducts.com www.easyzwave.com is a registered trademark of General Electric Company and is used under license to Jasco Products Company, LCC All brand names and products listed/shown are registered trademarks of their respective owners. © JASCO 2009
ET001 - 12/09