A
pgs. 10-63
Angle Mouldings • Aluminum • Even Leg - pg. 46 • Uneven Leg - pg. 46 • Plastic • Even Leg Clear (with & w/o adhesive) - pg. 44 • Even Leg Color (with & w/o adhesive) - pg. 45 • Even Leg Metallic (with & w/o adhesive) - pg. 44 • Uneven Leg Color (with & w/o adhesive) - pg. 45 • Uneven Leg Metallic (with & w/o adhesive) - pg. 44
Extrusions
Corner Channel Mouldings
Baseboard Mouldings & Carpet Extrusion
• Plastic Color - pg. 50
Capping (J-Shape) • Aluminum - pg. 39 • Color (with & without adhesive) - pg. 34 • Plastic Clear (with & without adhesive) - pg. 38 • Plastic Metallic Mylar Cover pg. 32
• Aluminum (60, 90, 135 degrees) pg. 40 • Plastic (clear & color) Joiner, 60º & 90º - pgs. 38, 41
Cove Mouldings • Aluminum - pg. 44 • Stainless Steel - pg. 44
Divider (H-Shape) • Aluminum - pg. 39 • Color - pg. 35 • Plastic Clear - pg. 38 • Metallic (Plastic) - pg. 37
Dust Seal • Plastic (Clear & Color) with & without adhesive pg. 49
Edgebanding • Automatic (without adhesives) • Color - pgs. 22, 24,-25 • Metallic - pg. 25 • Woodgrains - pgs. 24-25 • Iron On • Colors - pg. 23 • Paintable - pg. 23 • Wood Veneer - pg. 23 • Peel & Stick • Colors - pgs. 22-23 • Metallic - pgs. 22,26 • Woodgrains - pgs. 22-23 • Tools - pg. 21
Flat Trims • Aluminum: Half Round - pg. 42 • Plastic / Metallic Flat & Half Round with Adhesives - pgs. 26-27
A-10
Hinges • Acrylic, Butt, Piano Hinges - See Section B • Flat Hinge (Color & Clear) - pg. 47 • Plastic Panel (Color & Clear) - pg. 47 • Tee (Color) - pg. 47
Panel Retainers (Wood & Glass) • Plastic (Color & Clear) Adjustable, Groove & Staple - pg. 51
Table Beading pg. 62
U Channels • Aluminum - pg. 33 • Color - pgs. 28-29 • Flexible - pg. 31 • Metallic (Mylar) - pg. 32 • Plastic Clear - pg. 30 • Plastic Nyla-Glide GR™- pg. 31 • Stainless Steel - pg. 32
Z-Bar • Aluminum - pg . 43 • Suspension Rail & Brackets pg. 357 • Plastic - pg. 120
Impact Protection System • Cart Guard - pgs. 59-61 • Corner Guard - pgs. 53-54 • Handrail - pgs. 57-58 • Wall Guard - pgs. 54-56, 62
Sliding Door Track pgs. 48-49 Also See Section F For More Options
Tee Moulding • Aluminum (Fillers, No Notch, Standard, Rippled & Angled) pgs. 18-19 • Bumper • Double Lipped (Vinyl) pgs. 17 • Flat Face (Vinyl) - pg. 15 • Half Round (Vinyl) - pg. 16 • Lazy Susan (Vinyl) - pg. 17 • Poly - pg. 15 • Single Lipped (Vinyl) pg. 17 • Two Tone (Vinyl) Color & Metallic - pg. 18 • Waterfall Edge (6 mil) (Vinyl) - pg. 15 • Standard • Colors - pgs. 12-13 • Double Lipped - pg. 17 • Double Spline - pg. 17 • Filler Strip - pg. 18 • Flat Face Rigid - pg. 19 • Flexible - pg. 14 • Leatherette (Textured) - pg. 13 • Metallic - pg. 18 • Two Toned - pg. 18 • Woodgrains - pgs. 12-13 • Tools • Air Hammer - pg. 20 • Cutters & Clippers - pg. 21 • Edge Trimmers - pg. 20 • Moulding Blades - pg. 20 • Notching Tools - pg. 20 • Quick Drive Pneumatic Nailer pg. 20
A-11
FLEXIBLE POLYETHYLENE TEE MOULDING 250 FT. COILS Sample Chains Available - Please Inquire. 770 742 288 260 131 386 113 632 175 324 363 243
NOTE: We can supply other colors - Minimums apply - please inquire.
105-318-
Fits 3/8”
(minimum)
105-662-
817P 809P 423
STOCK COLORS:
ALMOND ANGOLA BROWN BEIGE BLACK BLUE BRONZE*** GREEN OPTI GRAY** PUTTY GRAY RED SILVER STORM GRAY**
Fits 25/32”
(minimum)
105-2732-
(minimum)
A-12
USES: S1/S7 SLOTTER
Fits 9/32”
866P 747P
Black, Brown & White
NATURAL OAK TEAK
USES: S055 SLOTTER
NOTE: CHERRY IS AVAILABLE IN 3/4”, 13/16” & 1-1/4” ONLY
105-667-
Fits 1/2”
105-668-
Fits 9/16”
USES: S1/S7 SLOTTER
USES: S065 SLOTTER
105-677-
Fits 11/16”
105-679-
Fits 3/4”
USES: S065 SLOTTER
USES: S065 SLOTTER
105-658-
USES: S1/S7 SLOTTER
Fits 27/32”
PHTHALATES FREE
105-656-
WOODGRAINS:
AMERICAN NAT. MAPLE BOSTON CHERRY OAK
USES: S1/S7 SLOTTER
105-2532-
BROWN CHAMOIS YELLOW** DOVE GRAY FRESCA GREEN** FOLKSTONE** GOLD*** TAN TAN TOY BLUE** WHITE YELLOW
*** 5000 ft. Minimum Apply **AVAILABLE IN 5/8”, 3/4” & 13/16” WIDTHS ONLY
USES: S055 SLOTTER
Fits 5/8”
315 248 125 236 212 253 579 709 614 601 895
Fits 13/16”
105-659-
USES: S1/S7 SLOTTER
105-650-
Fits 7/8”
Fits 13/16”
OFFSET
(minimum)
105-651-
USES: S1/S7 SLOTTER
SEE PAGE 14 FOR TEE MOULDING TOOLS & BLADES
USES: S1/S7 SLOTTER
Fits 1”
USES: S1/S7 SLOTTER
FLEXIBLE POLYETHYLENE TEE MOULDING PHTHALATES FREE
250 FT. COILS Sample Chains Available - Please Inquire. 105-563-
Fits 1-1/8”
105-564-
Fits 1-1/8”
OFFSET
USES: S1/S7 SLOTTER
105-1316-
Fits 1-3/16”
USES: S1/S7 SLOTTER
105-543-
Fits 1-1/4”
USES: S1/S7 SLOTTER
105-673-
Fits 1-1/2”
OFFSET
Fits 1-5/8”
Black, Brown & White 250 FT. COLOR .43’
1000 FT. .35’
Fits 1-1/4” W/BEAD
OFFSET
(#747P Teak is non stock - 5000 foot minimum)
USES: S1/S7 SLOTTER
105-672-
Fits 1-1/2”
USES: S1/S7 SLOTTER
105-1916-
Fits 1-9/16”
Black, Brown & White
USES: S1/S7 SLOTTER
105-1058-
105-544-
105-1059-
Black, Brown & White
USES: S1/S7 SLOTTER
105-1917-
Fits 1-9/16”
OFFSET
Black, Brown & White USES: S1/S7 SLOTTER
USES: S1/S7 SLOTTER
Fits 1-5/8”
OFFSET
USES: S1/S7 SLOTTER
105-2000-
Fits 2”
Black & White
USES: S1/S7 SLOTTER
USES: S2/S8 SLOTTER
FLEXIBLE EMBOSSED POLYETHYLENE TEE MOULDINGS 250 FT. COILS - BLACK
LEATHERETTE
108-679-260
NOTE: We can supply other colors, minimums may apply. Please inquire.
3/4”
USE S065 SLOTTER
108-658-260 13/16” 108-650-260
USE S1/S7 SLOTTER
7/8”
USE S1/S7 SLOTTER
SEE PAGE 14 FOR TEE MOULDING TOOLS & BLADES
108-543-260
1-1/4”
USE S1/S7 SLOTTER
A-13
FLEXIBLE METALLIC TEE MOULDINGS Streamlining Wrap Around Metallic Shell with PVC Core - Use S1 or S7 Slotter
POLISHED BRASS - POLISHED CHROME BRUSHED BRASS - BRUSHED CHROME - STAINLESS STEEL This flexible TEE MOULDING is manufactured from a soft, pliable vinyl which conforms to the contours of any product design with the highly flexible, bright finish surface and underside, it easily turns tight inside and outside corner radii.
2487-
2488-
1/2”
5/8”
2489-
2490-
11/16”
3/4”
* Available in Stainless Steel Finish 250 FT. COILS
2491-
250 FT. COILS
13/16”
* Available in Stainless Steel Finish
2492-
1”
* Available in Stainless Steel Finish
250 FT. COILS
2382-POL/B Only Available in Polished Brass
3/16”
2494-
1-1/4”
1-1/2”
* Available in Stainless Steel Finish 100 FT. COILS
100 FT. COILS
5187-
1/4”
2311-
S065-SLOTTER PVC/MYLAR 500 FT. COILS - SEMI-RIGID
7/16”
S4/10 SLOTTER PVC/FILM 12 FT. LENGTHS
Carbide Tipped Tee Moulding Blades
NO. OF SLOT PART# WINGS THICKNESS
A-14
250 FT. COILS
POLISHED BRASS - POLISHED CHROME
.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"
A1/B1
NO. OF SLOT PART# WINGS THICKNESS
S7 S8 S9 S10 S11 S12 S13
4 4 4 4 4 4 4
Complete Set
Arbor
4 Wing Blade
2 Wing Blade
2 2 2 2 2 2 2 2
2493-
250 FT. COILS
PVC-FILM S1/S7 SLOTTER 12 FT. LENGTHS
S055 S065 S1 S2 S3 S4 S5 S6
250 FT. COILS
.075" .080" 3/32" 1/8" 3/16" 1/4" .065"
2 Wing w/Arbor & Bearing
A1 Arbor w/Locknut & B1 Bearing w/Washer
5/16" Bore 1/4” Shank 1/2” Cut
NO. OF SLOT PART# WINGS THICKNESS
SJ-055 SJ-065 SJ-1 SJ-2 SJ-3 SJ-4 SJ-5 SJ-6
2 2 2 2 2 2 2 2
.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"
4 Wing w/Arbor & Bearing
NO. OF SLOT PART# WINGS THICKNESS
SJ-7 SJ-8 SJ-9 SJ-10 SJ-11 SJ-12 SJ-13
4 4 4 4 4 4 4
.075" .080" 3/32" 1/8" 3/16" 1/4" .065"
FLAT FACE BUMPER MOULDINGS
304-812-
PVC 250 FT. COILS WHITE, BLACK, DOVE GRAY & BROWN
Custom Colors Available Please Inquire INSTALLED .810 .835
13/16”
304-1125-
1-1/8”
INSTALLED 1.130 1.160
304-1250-
.450 REF.
1-1/4”
INSTALLED 1.260 1.300
.600 REF.
.520 REF.
.122 .132
.165 .185
.140 .150
ALSO AVAILABLE IN ALMOND S3 OR S9 SLOTTER
S4 OR S10 SLOTTER
S4 OR S10 SLOTTER
WATERFALL BUMPER TEE MOULDING 6 MILLIMETER COLOR THRU AND THRU
Unique Design Allows You To Trim From The Bottom While Keeping The Contoured Edge On Top. • MATTE PVC • BLACK 110-075-BK 3/4” 110-812-BK 13/16”
S4/S10 Slotter 250 FT. COILS
110-100-BK
S4/S10 Slotter 250 FT. COILS
110-112-BK
1”
S4/S10 Slotter 100 FT. COILS
Contoured Edge
110-875-BK
7/8”
S4/S10 Slotter 250 FT. COILS
1-1/8”
S4/S10 Slotter 100 FT. COILS
110-118-BK
1-3/16”
S4/S10 Slotter 100 FT. COILS
POLY BUMPER 307-750-BK
3/4”
307-812-BK
3/4”
307-1000-BK
13/16”
1”
13/16”
15/32”
5/16” 1/8”
S3/S9 Slotter 100 FT. COILS
PHTHALATES FREE
1/2”
5/16” 9/64”
S3/S9 Slotter 100 FT. COILS
PHTHALATES FREE
1”
17/64”
27/64” 1/8”
S3/S9 Slotter 100 FT. COILS
A-15
STANDARD BUMPER MOULDINGS
• PVC • COILS UPS SHIPPABLE • SELF HEALING
303-576-
1/2”
303-575-
1/2”
.490 .510
S1/S7 SLOTTER White - Black - Brown*
3/4”
303-812-
.450 REF.
13/16”
INSTALLED .805 .825
.113 .127
303-1250-
S2/S8 SLOTTER White - Black - Brown
303-875-
INSTALLED 1.240 1.270
.500 REF. .160 .170
S4/S10 SLOTTER-250 FT. COILS White- Black - Brown - Almond Dove Grey - Slate Grey - Red
S2/S8 SLOTTER White - Black - Brown
7/8” INSTALLED .880 .900
INSTALLED .990 1.015
.150 .165
S3/S9 SLOTTER White - Black - Brown - Almond Dove Grey - Slate Grey - Silver
Wood Grain
S4/S10 SLOTTER White - Black - Brown - Almond Dove Grey - Slate Grey* - Silver
1-1/2”
303-1750-
1.500 1.530
1-1/4”
INSTALLED 1.235 1.265
.660 REF. .170 .190
1”
.160 .175
S4/S10 SLOTTER White - Black - Brown
303-1500-
303-1250-OK PVC 100 FOOT COILS S4/S10 SLOTTER
303-1000-
.600 REF.
.124 .140
1-1/4”
.135 .145
.550 REF.
.475 REF.
S2/S8 SLOTTER White - Black - Brown
.685 .700
.125 .135
S1/S7 SLOTTER White - Black - Brown
INSTALLED .740 .760
11/16”
.375 REF.
.105 .115
.105 .115
303-687-
INSTALLED
.350 REF.
.265
.265
303-750-
5/8”
INSTALLED .625 .640
.515
.453
A-16
303-625-
.490 .510
1.740 1.760
.734
.437
1-3/4”
.177 .197
S4/10 SLOTTER-100 FT. COILS White - Black - Brown Dove Grey
.734
.437 .187
S4/10 SLOTTER-100 FT. COILS Whte - Black - Brown
GLOSSY BUMPER MOULDINGS GLOSSY DOVE GRAY, GLOSSY BLACK, GLOSSY ALMOND, GLOSSY YELLOW AND GLOSSY RED
PROPOR3019DRT- Fits 11/16” & 3/4”
50’ Coil
1-3/16”
5/8”
3/16”
S4/S10 SLOTTER MIN. RADIUS 5”
GLOSSY BLACK • PVC/DUAL DUROMETER • HIGH PROFILE DESIGN • CAN MAKE 4”- 6” RADIUS 302-812-BK/BK 13/16” 302-1250-BK/BK 1-1/4” GLOSSY TOP GLOSSY TOP COLORS
13/16” 5/8”
1.220
COLORS
.140
1/16” 5/8”
.030
1.133
.425
9/32”
.170
1/8”
S3/S9 SLOTTER
S4/S10 SLOTTER
250’ Coil
50’ Coil
GLOSSY WHITE, GLOSSY BLACK, GLOSSY BROWN, GLOSSY ALMOND, GLOSSY DOVE GRAY, RED & BLUE 303-1032S4/S10 SLOTTER
.250
For 7/8” Board
.090 .170 .185
50’ Coil
SPECIALTY BUMPER MOULDING 1.250
.525 REF.
.395 .425
.090 .350 REF. .160 .180
1-1/2”
S4/S10 SLOTTER
.460 REF.
310-1000-
1.440 1.480
303-1038-
1-1/4”
1.230 1.270
50’ Coil
LIPPED TEE MOULDINGS 521-812-260 (BK) 13/16” 521-875-260 (BK) 521-812-601 (WH) 521-875-601 (WH)
7/8”
.625 .140
ANGLE BUMPER MOULDING VINYL PVC - 125 FT. COILS GLOSSY WHITE, BLACK & BROWN S4/S10 SLOTTER
DOUBLE SPLINE STYRENE - BLACK - 6 Ft. lengths S3/S9 SLOTTER Use when attaching mouldings to routed surfaces
R106-684-BK
250 FT. COILS POLYETHYLENE BLACK or WHITE S1/S7 SLOTTER
250 FT. COILS POLYETHYLENE BLACK or WHITE S2/S8 SLOTTER
FLEXIBLE LAZY SUSAN MOULDING
308-1254-WH
PVC Material 50’ Rolls Available in White S3 OR S9 SLOTTER
1.500
1-1/2”
.125 .500
A-17
STRAIGHT EDGE METALLIC TEE MOULDING POLISHED BRASS - POLISHED CHROME • 12 FT. LENGTHS • RIGID • ABS/MYLAR
1978-
• PROTECTIVE COVER • ABSOLUTELY WAVE AND DISTORTION FREE • AVAILABLE FROM STOCK
1/4”
2198-
5/16”
2025-
S1 OR S7 SLOTTER
S055 SLOTTER
1928-
1/2”
S1 OR S7 SLOTTER
3/4”
S1 OR S7 SLOTTER
2-TONE DESIGNER TEE MOULDING 9677S-B/C
5/8”
250 FOOT COILS USE S2 OR S8 SLOTTER BRITE CHROME W/BLACK SHOULDERS=(B/C)
96782S-
3/4”
250 FOOT COILS USE S2 OR S8 SLOTTER BRITE BRASS W/BLACK SHOULDERS=(B/B) BRITE CHROME W/BLACK SHOULDERS=(B/C)
2308-BK
Nominal 11/16”
250 FT. COILS S2 OR S8 SLOTTER PVC FILM BRASS EDGES W/BLACK CENTER=BK
90212-BK/POLC
1”
OFFSET FOR 5/8” BOARD - USE S3 OR S9 SLOTTER BLACK W/POLISHED CHROME 250 FT. COILS - PVC
2340-BK
3/4”
250 FT. COILS PVC FILMS S2 OR S8 BRASS EDGES W/BLACK CENTER=BK
2376-BK
1-1/2”
12 FOOT LENGTHS GLOSSY BLACK S2 OR S8 SLOTTER HIGH GLOSS PVC
ALUMINUM FILLERS FINISH CHART M
ALU411-
12 FOOT LENGTHS 1/2”
ALU0365-P
3/4”
ALU0395-P
Mill
As extruded - may or may not have “scratches”/die lines. Dull Finish.
P
Polished- Mechanical
Shiny / Mirror Finish.
Dull, Matte Finish
S
A-18
Satin - Clear Anodized
120 Ft. Mill 600 Ft. +
Polished
Satin
120 Ft. Polished 600 Ft. +
120 Ft. Polished 600 Ft. +
1”
“NO NOTCH” ALUMINUM TEE MOULDING 12 FOOT LENGTHS New Technology Allows You To Shape And Form To A Variety Of Designs. A305-RF40N-
Rippled Face
Standard Aluminum Tee Will Not Form A Bend Unless Notched.
The New “No Notch” Aluminum Makes Forming Easy!
Mill
As extruded - may or may not have “scratches”/die lines. Dull Finish.
S
A305-RF48-
1-1/2” Rippled Face
Center Barb
FINISH CHART M
1-1/4”
Satin - Clear Anodized
Off-set Barb
S065/S13 SLOTTER
S055 SLOTTER
MAXIMUM RADIUS 4”
MAXIMUM RADIUS 4”
Dull, Matte Finish
REAL ALUMINUM TEE MOULDINGS ALU369T- S
FINISH CHART
13/16”
M Mill As extruded - may or may not have “scratches”/die lines. Dull Finish. P
Shiny / Mirror Finish.
Dull, Matte Finish
S
0.100
13/16”
ALU1957-
0.813 0.100
S065/S13 SLOTTER
ALU1029-
13/16” Rippled Face
S055 SLOTTER
S065/S13 SLOTTER
S055 SLOTTER
Satin - Clear Anodized
ALU1029P-
3/4” 0.750
Polished- Mechanical
ALU1028-
1”
ALU568P-
1-1/4”
ALU968POS-
1-1/4”
1.000 0.100
S065/S13 SLOTTER
ALU968N -
Rippled Face
1-1/4”
S065/S13 SLOTTER
S065/S13 SLOTTER
ALU9680-
Rippled Face
S055 SLOTTER
1-1/4”
S055 SLOTTER
ALU7777-
Rippled Face
1-1/2”
S055 SLOTTER
A-19
PNEUMATIC TOOLS Hand Held AIR HAMMERS
• OVER 1000 BLOWS PER MINUTE. • NO SWINGING. • Can be used anywhere the smallest hand can reach. Replaces wide variety of cumbersome hammers and mallets. No skilled personnel. • CONTROL. A single hammer blow or excess of 1000 blows per minute. Adjustable from slightest hammer tap to heavy impact blows. REPLACEMENT PARTS • VERSATILE. Easily interchangeable hammer tips of super soft hard plastic, PART # DESCRIPTION steel and aluminum. T-15SS Hammer Tip • PALM SIZE-LIGHTWEIGHT-SAFE. T-15S Hammer Tip T-15M Hammer Tip LEATHER TOOL GLOVE DANAIR HAND HELD HAMMER T-15H Hammer Tip FOR AH15 OR AH15 (Supplied w/standard blue tip) T-15AL Hammer Tip AH25 HAMMER T-15ST Hammer Tip imported HAND HELD HAMMER AS-706 159 Stem AH25 (Supplied w/standard blue tip) HAMMER TIP 4-212 "O" Ring T-15SS (Super Soft Plastic) Red 163 Bumper T-15S (Soft Plastic) Blue 3-127 "O" Ring T-15M (Medium Plastic) Black QUICK DRIVE NAILER T-15H (Hard Plastic) Yellow 158 Valve AUTOMATICALLY HAMMERS COMMON NAILS INTO T-15AL (Aluminum) 3-114 "O" Ring WORK PLACE. IDEAL FOR TIGHT CORNERS. T-15ST (Steel) 4-218 "O" Ring • Operating pressure - 80-125 PSI. 157 Cap AS-OK-15 REPAIR KIT • Air consumption - 2-4 CFM. INCLUDES: 2-031 "O" Ring RN16-30M • Drives 3d through 12" spikes with proper 1 - ALL-O-RINGS 161 Exhaust Seat (With Magnetic Tip) 1 - AS-ORL-O-RINGS LUBE guide selection. 162 Plug 1 - 163 BUMPER • Maximum nail head diameter - 27/64" 156 Housing • Penny size: 8-20 • Triggerless/safe. • Weight: 2.5 lbs.
NOTCHING TOOLS The most important "quarter inch" in mitering is that small portion of the barb which is removed by the notching tool. This special "V" cut enables the moulding to negotiate small radii and sharp corners for a clean, smooth installation. PART#
P900R 1870A P900A 1840A P900V 848A
DESCRIPTION
Vinyl Tee Moulding Notcher - cuts 1/4" radius Replacement Blade Aluminum & Vinyl Notcher with 1/16" opening Replacement Blade (A-Notch) Channel and Angle Notcher with 3/32" opening Replacement Blade
PUNCH THICKNESS
-
101-TRIMMER
0.090" -
S055 S065 S1 S2 S3 S4 S5 S6
2 2 2 2 2 2 2 2
.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"
NO. OF SLOT PART# WINGS THICKNESS
SJ-055 SJ-065 SJ-1 SJ-2 SJ-3 SJ-4 SJ-5 SJ-6
2 2 2 2 2 2 2 2
.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"
4 Wing Blade
4 Wing w/Arbor & Bearing
With additional jaws 45° or 30° for plastic lippings
NO. OF SLOT PART# WINGS THICKNESS
NO. OF SLOT PART# WINGS THICKNESS
101XTRA-BLADE (X-Blade)
This all metal hand tool features a precise high carbon steel cutting blade that trims excess material from the edge of the T-molding face, creating a smooth flush table or counter surface. The unique circular blade can be rotated to expose a new sharp cutting surface. This feature eliminates the need for frequent sharpening. Heavy cast aluminum housing with ball bearing roller guides facilitates easy operation.
A-20
Complete Set
2 Wing w/Arbor & Bearing
With fence for veneer edge & PVC lippings
FLUSH TRIMMER
992006-000-0000
CARBIDE TIPPED TEE MOULDING BLADES
NO. OF SLOT PART# WINGS THICKNESS
0.050"
THE-QUALITY HSS BLADE (3mm thick, 18% tungsten) has two cutting edges and, therefore, operates both forwards and backwards and effortlessly cuts off all projecting lippings neatly and completely flush-when the additional jaws are used with a chamfer of 300 or 450. The chamfer is adjustable according to the spacing between the additional jaws. Supplied with a built-in blade and additional jaws 450 mounted, a pair of additional jaws 300 and on fence for plane parallel cutting--the latter for PVC and veneer edges.
SHORTENS STROKE BY 1/4" REDUCES HAMMERING FORCE
2 Wing Blade
0.156"
TEE MOULDING TOOLS
EDGE TRIMMER 101
AS-319 STROKE CONTROL SPACER (available as optional accessory)
992007-000-0000 (X-Blade)
S7 S8 S9 S10 S11 S12 S13
4 4 4 4 4 4 4
.075" .080" 3/32" 1/8" 3/16" 1/4" .065"
SJ-7 SJ-8 SJ-9 SJ-10 SJ-11 SJ-12 SJ-13
4 4 4 4 4 4 4
Arbor A1/B1...Complete Set A1 Arbor w/Locknut & B1 Bearing w/Washer • 5/16" Bore • 1/4” Shank •1/2” Cut
.075" .080" 3/32" 1/8" 3/16" 1/4" .065"
EDGEBANDING TOOLS Maxi-Edge Clamp
• Attaches to most substrates from 1/2” to over 3” wide. • Anti-skid pads on jaws allow it to be used on finished surfaces. • Soft plastic head on the pressure handle will not damage the edge. • Can be used on concave & convex rounds, compound & complex angles & straight edges. PART # MX-CLAM
1 MANUAL EDGE BANDER
The H40 Edgemate Applicator is hand held and perfect for smaller jobs. It has an adjustable thermostat - from 250o - 450o. Heating element is also available.
H40
3 EDGE TRIMMER
For banding pre-glued edges on PVC, polyester, melamine and veneer. It can band both straight and shaped work pieces. Through special design of an adjustable clamp high precision work and reliability are ensured. Guillotine knife for end trimming and roll-holder included as standard equipment.
Double edge trimmer. Cuts both sides simultaneously, finishing operations. For edges up to 40mm. For larger edges it can be used as two independent edge trimmers. Top quality long life blades which are easy to replace once worn.
2 END TRIMMER
EBS-980
EBS-980-XBLADE
Manual end trimmer. It allows a perfect, clean and high quality cut on all the corners of the board. No other finishing operations are needed. Equipped with double sided blades.
(Replacement Blade)
SPECIFICATIONS: • Double Insulation • Max. Banding Width - 50mm • Temperature - 300°C (570°F) to 525°C (1000°F) • Air Delivery - 400/min. • Input Power - 115/230 V, 50-60 Hz. • Weight - 2,7 Kgs
Special Savings Buy All 3 Tools For One Price Part # EBS-SET
1
3
2
Hand Held Edgebanding Applicator
Manual Edgebander, End Trimmer & Edge Trimmer
MULTIPURPOSE CUTTER CT-2000
EBS-930
EBS-930-RB
(Replacement Blade)
EBS-210... EBS-210-RB... (Replacement Blade)
Indispensable Tools For A Perfect Edgebanding & Finishing Of Pre-glued Edges.
CL46 CLIPPER
WITH 5 INTERCHANGEABLE ANVILS IN A CONVENIENT STORAGE CASE
MITER ANVIL
For mitering at multiple angles.
SINGLE RADIUS ANVIL
For 90° angles.
For 1” dia. material.
FLAT ANVIL
For straight and flat cuts.
REPLACEMENT PARTS AVAILABLE:
BLADE
CT-BLD • Heavy duty forged steel blade for extra tough materials. • Ergonomic handle for comfortable use. • Lightweight diecast aluminum anvils. DOUBLE RADIUS ANVIL
CT-DRA
RIGHT ANGLE ANVIL
CT-RAA
MITER ANVIL
CT-MA
DOUBLE RADIUS ANVIL For 5/8” and 3/4” dia. material.
SINGLE RADIUS ANVIL
CT-SRA
FLAT ANVIL
CT-FA
DELIVERS QUICK CLEAN CUTS Plastic Tubing - Rubber - Weather Stripping Rope - Twine - Leather - Plants/Shrubs - Crafts - Wood Trim - Carpeting - Linoleum - Auto Trim - Auto Belts & Hoses Nylon and much more! • Replacement stainless steel blades (previously carbon) • New convenient blade storage in the handle blade tray slips into handle for storage of extra blades. • Now available in 2 sizes: 2-1/2" & 3-7/8". • New replacement kit contains 3 stainless steel blades and 1 anvil: complete with storage tray.
CL46-25...2-1/2" Clipper CL46...3-7/8" Clipper Replacement Kits: CL46-25RK CL46RK
A-21
PVC TAPES GENERIC COLORS
• .018 thickness. PART # PVC875-WH PVC875-BK PVC875-AL PVC1516-WH PVC1516-BK PVC1516-AL
• Textured surface. WIDTH 7/8” 7/8” 7/8” 15/16” 15/16” 15/16”
• 2MM thickness.
• 3MM thickness.
FINISH Black Almond
PART # WIDTH PVC3MM-BK 15/16” PVC3MM-AL 15/16”
PIONITE SW811 SE101 ST655 SW811 SE101 ST655
FINISH Black Almond
NEVAMAR X S-6-1 X X S-6-1 X
• 328’ coils.
FORMICA WILSONART 909 1595 920 D-30
• Smooth surface.
Product Features:
PIONITE NEVAMAR SE101 S-6-1 ST655 X
• 328’ coils.
FORMICA WILSONART 909 1595 920 D-30
PIONITE NEVAMAR SE101 S-6-1 ST655 X
PART # DESCRIPTION FESP-343/4” PVC Solid Fast Edge FEWP-343/4” PVC Wood Grain Fast Edge FESW-34- 3/4” PVC Unfinished Wood Fast Edge FEPW-343/4” Finished Wood Fast Edge FEME-343/4” Metallic PVC Fast Edge FESP-151615/16” PVC Solid Fast Edge FEWP-1516- 15/16” PVC Wood Grain Fast Edge FESW-1516- 15/16” Unfinished Wood Fast Edge FEPW-151615/16” Finished Wood Fast Edge FEME-151615/16” Metallic PVC Fast Edge
• Just peel and stick it. • Bond increases in strength with time. • 70 standard colors in durable PVC & Real wood veneers. • 50’, 250’, & 600 foot rolls. • 3/4” & 15/16 widths, .020 thickness. • Custom colors available for 1 roll minimum.
PVC
FORMICA WILSONART 949 X 909 1595 920 D-30 949 1573 909 1595 920 D-30
• Smooth surface.
PART # WIDTH PVC2MM-BK 15/16” PVC2MM-AL 15/16”
Custom colors & sizes available. Minimums apply. Inquire for quote.
FINISH White Black Almond White Black Almond
• 600’ coils.
(Solids, Woodgrains and Metallics)
* Metallic Finishes are 500 Ft. Rolls
White (WH)
Pickled Oak
(PO)
American Maple (AM)
Polished Brass
Autumn Cherry
Red Mahogany
Antique White
(AW)
Rosewood Oak (SD)
Natural Cherry (NC)
Brushed Chrome (BCHR)
Fuji Cherry
Dark Red Mahogany (DM)
Almond (AL)
Medium Oak
Presidential Walnut (PW)
Polished Chrome
Black (BK)
Light Oak
(LO)
Imperial Walnut (IW)
Select Cherry
Fog Gray
(DG)
Hardrock maple (HM)
Mahogany on Walnut (MW)
Folkstone Gray (LG)
Manitoba Maple (MM)
Knotty Pine
Bourbon cherry (BC)
Natural Oak
(NO)
White washed Maple (WM)
Beech
(BE)
Golden Cherry (GC)
Golden Oak
Light Maple
Finished MDF
Dark Cherry
Renaissance Oak (RN)
Clear Maple
Brushed Brass (BR)
Heritage Cherry (HT)
(GO)
A-22
(MD)
(LM)
(CM)
(KP)
(MDF)
(PBR)
(PCHR) (SC)
Medium Cherry
(MC)
(DC)
(AC)
(RM)
(FC)
Unfinished
(Real Wood)
Red Oak
Maple
White Oak
Cherry
(RO)
(WO)
Pre-finished
(MP)
Walnut
(WA)
(CH)
(Real Wood)
Red Oak
Maple
Birch
White Oak
Cherry
Walnut
(FRO)
(FWO)
(FMP) (FCH)
(FB)
(FWA)
For more Unfinished and Pre-finished colors, please go to Page 264.
EDGEBANDING
WITH PEEL & STICK ADHESIVE BACKING
• BUTT JOINT • PRE-SANDED • STAINABLE • NO TOOLS NEEDED • CONTINUOUS 250 FT. COILS • WORKS WITH MOST FOAM BOARD EDGES
250 FT. MINIMUM ORDER
Polyester Edge Banding in Color
Real Wood Veneer Edge Banding
POLYESTER
Stocked in Red Oak, White Oak and White Birch
REAL WOOD VENEER PART # VE-500* VE-625* VE-750* VE-812* VE-1000* VE-1500*
Stocked in White, Black and Almond PART # PE-500* PE-625* PE-750* PE-812* PE-1000* PE-1500*
WIDTH 1/2” 5/8” 3/4” 13/16” 1” 1-1/2”
WIDTH 1/2” 5/8” 3/4” 13/16” 1” 1-1/2”
Other Species Available Please inquire 5000 ft. min
PRE-GLUED IRON ON TAPES COLORS
Black=BK, Frost White=WH, Almond=AL PART # SIZE IOC6255/8” IOC687- 11/16” IOC7503/4” IOC812- 13/16” IOC8757/8” IOC1001” IOC1125- 1-1/8” IOC1250- 1-1/4” IOC150- 1-1/2”
REAL WOOD VENEER
Red Oak=RD White Oak=WO White Birch=WB Cherry=CH PART # IOV625IOV687IOV750IOV812IOV875IOV100IOV1125IOV1250IOV150-
SIZE 5/8” 11/16” 3/4” 13/16” 7/8” 1” 1-1/8” 1-1/4” 1-1/2”
STANDARD WOOD VENEER EDGING 7/8” FLEECE BACKED TAPE 500 FT. COILS PART #
WOOD SPECIES
CT875CH Cherry CT875HM Honduras Mahogany CT875MP Maple CT875RO Red Oak CT875WAL Walnut CT875WA White Ash CT875WB White Birch CT875WO White Oak
• FINGER JOINTED, CONTINUOUS ROLLS • FINE SANDED • STAINABLE NOTE: OTHER SIZES AND WOOD SPECIES ARE AVAILABLE. PLEASE INQUIRE FOR DETAILS ON YOUR REQUIREMENTS.
13/16” PRE GLUED TAPE 250 FT. ROLLS PART #
WOOD SPECIES
CT812CH Cherry CT812HM Honduras Mahogany CT812MP Maple CT812RO Red Oak CT812WAL Walnut CT812WA White Ash CT812WB White Birch CT812WO White Oak
A-23
REHAU EDGEBANDING Introducing A Complete Line Of Rehau Edgebanding We Can Match Virtually Any Laminate Color Call Us Today
THIN EDGEBAND
N EW
This edgebanding is ideal for thinner panels in a variety of sizes and colors at an affordable price. Available In Width Sizes: 5/8”, 3/4”, 7/8”, 15/16”, 1-5/16” Thickness: .018 & .020 Sold In 600’ Coils COLOR Generic Colors Solid Colors Woodgrains
SPECTRAEDGE ® Comprised of durable impact resistant and rigid PVC. This edging is ideal for high traffic areas and has superior machinability for easier processing. Available In Width Sizes: 15/16” & 1-5/16”
Thickness: 1MM, 2MM, & 3MM (1MM) Sold in 600’ Coils
**Only Available 15/16” Width**
(2MM and 3MM) Sold In 300’ COLOR Generic Colors Solid Colors Woodgrains
FLEXEDGE ®
This is a durable impact resistant semi-rigid edge band, handles a radius as small as 12MM without extra pressure or excess adhesive. The flexible 3MM material trims easily and is ideal for use with contour edgebanders. Available In Width Sizes: 15/16” & 1-5/16” Thickness: 3MM
Solid In 300’ Coils COLOR Solid Color Woodgrains
A-24
!
REHAU EDGEBANDING Introducing A Complete Line Of Rehau Edgebanding We Can Match Virtually Any Laminate Color Call Us Today
N EW
!
ECO STYLE ™ ABS EDGEBAND
ABS is chlorine - free both in its manufacture and in the final product. Unlike PVC, ABS may be incinerated with general waste. Additionally, this thermoplastic material is impact and temperature resistant, lighter in weight and highly heat resistant. Material is produced in our North American facility according to ISO 14001 environmental standards.
Available In Width Sizes: 15/16” & 1-5/16”
Thickness: .018, .020 & 3MM
Sold In 600’ Coils, Except 3MM Which Is 300’ Coils COLOR Solid Colors Woodgrains
Visions™ Glass Like
Glass is synonymous with clarity, light and openness, with visions™ edgebandit achieves the unique appearance of real glass using lightweight, robust polymer. We create the illusion of depth by applying a decorative print to the underside of transparent PMMA material. When this material is radiused or beveled, it diffuses light in the same way as real glass. By combining vision edgeband with matching boards or laminates, you can achieve the appearance of a real sheet of glass. Available Colors: White, Mint, Sky Blue, Ice Blue Sold in 328’ Coils Sizes 23MM x 2MM 45MM x 2MM
Magic Metallic
Using various combination of genuine aluminum edgeband and polymers, Magic™ Metallic edgeband achieves the look and feel of metal banding without its processing drawbacks. The magic collection, offered in aluminum and stainless steel finishes, includes metallic surface, translucent and magic creativo™, a twin level solid or printed surface with metallic overlay. Many more colors and sizes available. We can match virtually and laminate color, call us today! Solid In 492’ Coils COLOR 22MM x 1.5MM 28MM x 1.5MM 43MM x 1.5MM
A-25
HALF-ROUND DECORATIVE TRIMS POLISHED BRASS & POLISHED CHROME
Use tee style moulding on doors, but when looking to match the drawer fronts, use stick on trim to reposition allowing for straight seamless lines.
2301-
1/4”
.240 .260
CFWW2501/4”
1/8”
.100 .120
Black Brite Brass Brite Chrome Vinyl w/Adhesive 100 FT. COILS
Polished Brass Polished Chrome PVC/Film/tape 100 FT. Coils - Flexible
CUT PROGRAMS 1. STANDARD CUT- Rough cut to allow for small parcel shipping. 2. CUT TO SIZE - Achieves a higher tolerance. See page 9 for details
2004.330 .350
3/8” Light
5185-B/B 5185-B/C
5/8”
.610 .625
.075 .095
2782-
PROTECTIVE FILM .740 .710
.175
Polished Brass Polished Chrome PVC/Film/Tape 100 FT. Coils - Flexible
1/4”
3/4”
2018-POL/B 7/16” LIGHT
.110 .090
.250 .280
.390 .420
1/2” TAPE
Only Available in Brite Brass & Brite Chrome PVC/Film/Tape 100 & 500 Ft. Coils
Polished Brass Polished Chrome PVC/Film/Tape 250 Ft. Coils
Polished Brass PVC/Film/Tape 12 Ft. Lengths
METAL LIKE TRIMS DESIGNED FOR ALL TRIM APPLICATIONS • Displays • Furniture • Nightclubs • Store Fixtures • Commercial & Residential
FINISHES AVAILABLE: Polished Brass • Polished Chrome • Brushed Brass • Brushed Chrome • Gloss Black
*
• MATERIAL: Deposits of metallized plastic with a durable lacquered finish, laminated to a THERMOPLASTIC BACKER • PROTECTIVE COVER PROTECTIVE COVER • Can be sawed, cut or routed without delamination WITH OR WITHOUT • CLEAN, FINISHED EDGES WITHOUT FILING SELF-ADHESIVE • Can be used for silk screening BACKING • Saves labor • Scratch resistant 250 FT. COIL NTP TRIM • Eliminates joints and seams (With Adhesive) .024 Thickness
Matching 4’ x 8’ sheets are available See pages 674-675 Additional Colors/Finishes & Widths are available - please call with your inquiry
A-26
PART # SIZE NTP-251/4” NTP-501/2” NTP-753/4” NTP-8757/8” NTP1516- 15/16” NTP-11” NTP-1-25- 1-1/4” NTP-1-50- 1-1/2” NTP-22” NTP-33” NTP-66” NTP-2424”
Highest Quality Metallic Trim
500 FT. COIL NTP TRIM (Primed/No Adhesive) .020 Thickness
PART # ET-50ET-75ET-875ET-1ET-1-25ET-1-50ET-2ET-3ET-6ET-24-
SIZE 1/2” 3/4” 7/8” 1” 1-1/4” 1-1/2” 2” 3” 6” 24”
*NOTE: ET TRIMS
ARE PRIMED FOR USE W / A U T O M AT I C EDGEBANDER EXCEPT GLOSS BLACK
FLAT DECORATIVE TRIMS
2179
2525
2525-
1/4”
5082-
3/8”
1857-
1/2” 2179-
5/8”
MYLAR LAMINATE WITH PROTECTIVE FILM
.235 .265
.490 .510
.360 .390
.040
.025 .035
.045 .055
.187 TAPE
.615 .635
1/4” FOAM ADHESIVE TAPE
250 FT. COILS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
100 & 500 FT. COILS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
100 FT. COILS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
2426-
2427-
2428-
.730 .770
3/4”
1”
.020 .025
1-1/4” 2429-POL/B
.020 .025
.020 .025
.020 .025
100 FT. COILS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
100 FT. COILS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
2430-
6107-
2190-
1.980 2.020 .020 .025
100 FT. COILS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
3/4” .740 .760
.625 .640
.090 .100 1/2” FOAM TAPE
100 &500 FT. COILS Brass Edges All Polished Brass All Polished Chrome
.240 .260
1-1/2” 1.480 1.520
100 FT. COILS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
2”
12 FT. LENGTHS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
1.230 1.270
.980 1.020
.080 .090
1/2” TAPE
3/4”
100 FT. COILS Polished Brass ABS/Film with Adhesive Tape
Multi Purpose Cutter Available
CT-2000
.040 .050
.765 .795
12 FT. LENGTHS Polished Brass - Polished Chrome ABS/Film with Adhesive Tape
A-27
COLOR U-CHANNEL MOULDING 132-
Fits Up To 1/8”
8 & 10 Ft. Lengths
130-
Fits Up To 1/8”
8 & 10 Ft. Lengths
R104-581-
Fits 1/8”
12 Ft. Lengths
R104-582-
Fits 3/16”
12 Ft. Lengths
3/32” 1/2”
3/4”
3/16”
5/32”
1/32”
7/32”
1/8”
106-4808
Fits 1/8”
8 Ft. Lengths
White - Black Material: Color/Styrene
2326-BK (High Gloss Black) ABS/Film Material
.100 .150
.145 .165
w/Adhesive
.500 .530
5/16” 7/32”
Fits 1/4”
131-
383-
Fits 3/8”
12 Ft. Lengths
.488”
White - Black Material: Styrolux
R104-4016-
Fits 5/16”
12 Ft. Lengths
9/32”
5/16” 1/4” White - Black Material: Styrene
R104-589-
Fits 3/8”
12 Ft. Lengths
White - Black Material: Color/Styrene
121-
11/16”
3/64”
Fits 1/2” PROTOTYPE SAMPLES
1/4”
9/16”
3/32”
White - Black - Brown Material: Styrene
5/16” White - Black Material: Styrene
12 Ft. Lengths 27/64”
3/8” White - Black- Beige Material: Color/Styrene
.075”
3/64”
3/8”
A-28
Fits Up To 1/4”
8 & 10 Ft. Lengths
19/64” 1/4”
Fits 3/16”
12 Ft. Lengths
.190”
1/2” 3/8”
21/64” 3/64”
142F-
5/32”
1/4” White - Black- Silver- Beige Material: Color/Styrene-Silver PVC
3/64”
White - Black - Brown Material: Styrene
12 Ft. Lengths
White - Black - Brown Material: Styrene
3/16”
FILM
.210 .230
13/64” 9/32”
Fits 7/32”
12 Ft. Lengths
High Gloss Film
.485 .515
Fits 1/4” R104-588-
12 Ft. Lengths
3/64”
R104-744-
Fits 5/32”
White - Black Material: PVC
141-
White - Black Material: Styrene
12 Ft. Lengths
7/16” 1/2”
3/16”
3/16”
3/16” White - Black Material: Styrene
1/32”
3/64”
1/2”
White - Black- BrownBeige - Silver Material: Color/Styrene-Silver PVC
We Are Happy To Provide Samples For Prototypes & Design Builds Please Inquire.
COLOR U-CHANNEL MOULDING 212-
Fits 1/2”
12 Ft. Lengths
R104-683-
3/8” 1/2” 3/64”
PLEC-
Fits 9/16”
8 Ft. Lengths
.375
1/2” White - Black - Brown Material: Styrene
Fits 5/8”
R104-554
Fits 5/8”
12 Ft. Lengths 3/8”
.040 Wall Thickness
1/2”
12 Ft. Lengths 31/64”
585-
.575
3/64”
1/2”
White - Black - Beige Material: Color/Styrene
158-
Fits 1/2”
12 Ft. Lengths 7/16”
Fits 5/8”
12 Ft. Lengths
Fits 3/4”
12 Ft. Lengths 5/8”
1/2”
5/8”
White - Black- Brown - Beige Material: Color/Styrene
Black Material: PVC
R104-569-
1/2” 3/64”
341-
Fits 3/4”
12 Ft. Lengths 11/16”
5/8” 3/64”
5/8” 5/8”
5/8”
White - Black - Brown Material: Color/Styrene
100-
12 Ft. Lengths
Fits 1” R104-5145-
1”
1/16”
Fits 1-1/4”
12 Ft. Lengths
112-
Fits 1-1/2”
12 Ft. Lengths 1-25/64”
1/2”
11/16”
White - Black - Brown Material: Styrene
3/4”
White - Black- Brown- Silver - Beige Material: Color/Styrene-Silver PVC
1-9/64”
1-1/16”
12 Ft. Lengths
114-
3/8” 1/16”
White - Black Material: Styrene
1-3/64”
White - Black- Brown Material: Color/Styrene
110-
Fits 1-1/16”
12 Ft. Lengths
1/2”
5/64” 3/4”
White - Black Material: Styrene
29/32”
1/16”
3/4”
1/16”
1/16”
1-1/4”
White - Black - Brown Material: Styrene
1/2” 1/16”
1-1/2”
White - Black - Brown Material: Styrene
Fits 2”
2” 1/4”
3/32” 1/16”
PROTOTYPE SAMPLES We Are Happy To Provide Samples For Prototypes & Design Builds Please Inquire.
White - Black - Brown Material: Styrene
A-29
CLEAR U-CHANNEL MOULDING 2128-CL
.030 .040
Fits 1/16”
708-CL
Fits 1/16”
Clear 12 Ft. Lengths Material: Butyrate
141-CL
Fits 3/16” .075”
1/2”
.330 .360
.488”
Fits 1/4”
Clear 12 Ft. Lengths Material: Butyrate
1059-CL
Fits 11/64”
.130 .140
Clear 12 Ft. Lengths Material: PVC
Fits 1/4”
5/16” Clear 8 & 10 Ft. Lengths Material: PVC
27/64”
Fits 1/2”
Fits 1/4”
.175 .190
383-CL
585-CL
Fits 5/8”
Clear 12 Ft. Lengths Material: PVC
385-CL
Fits 3/8”
12 Ft. Lengths 5/16”
3/8” 3/8” 3/64” Wall
Clear 12 Ft. Lengths Material: PVC
Clear Only Material: PVC
Fits 3/4”
11/16”
100-CL
Fits 1” 29/32” 1/2”
3/8” 1/16”
5/8”
Clear 8 Ft. Lengths Material: Butyrate
3/8”
341-CL
.060 wall thickness
1/4”
5/16” 3/64”
Clear 12 Ft. Lengths Material: PVC
Fits 3/8”
3/64”
.230 .240 Clear 12 Ft. Lengths Material: Butyrate
1/4” 1/2”
Fits 1/4”
.250
Clear 12 Ft. Lengths Material: Butyrate
17/32”
3/64”
P2743 .750
21/64”
.520 .550
1/2”
.190” Clear 12 Ft. Lengths Material: Styrolux
.250 .270
Clear 12 Ft. Lengths Material: RPVC
2014-CL
Fits 1/4” .285 .315
.180 .170
1/4”
131-CL
1830-CL .190
.500 .490
9/32”
3/64”
3/16” Clear 8 & 10 Ft. Lengths Material: PVC
.210
13/64”
3/4” Clear 12 Ft. Lengths Material: PVC
Cut Program Available
SEE PAGE 9 ILS FOR DETA
A-30
142F-CL
.190 .210
.140 .150
121-CL
Fits 1/8”
Gap adjustable
1/16” Ref.
.540 .560
130-CL
1/16”
1”
Clear 12 Ft. Lengths Material: PVC
FLEXIBLE U-CHANNEL 113-1001
Fits 1/32” 113-1002
Fits 1/16”
7/32”
5/32”
113-1003
Fits 1/8”
9/32”
113-1004
5/16”
Fits 3/16”
1/16”
1/32”
3/16”
1/8”
1/4”
Black 500 Ft. Coils Material: Dense Neoprene Rubber
113-1005
Fits 1/4” 1/4”
808-500
Fits 1/8” 809-343 Fits 3/16”-1/4”
809-317
.660
.520 .390
Fits 1/2”
.065
1/4”
Black 500 Ft. Coils Material: Dense Neoprene Rubber
808-625
Black Only
1/4”
Black Only
100 Ft. Coils
1/4” 3/4”
100 Ft. Coils
Black Only
Material: Vinyl
809-837-BK
Fits 1/2”
Fits 5/8”
809-838-BK
5/8”
.970
.875
.938
1/16” 1/4” Black & White 100 Ft. Coils Black & White 125 Ft. Coils Material: PVC with Material: PVC with Segmented Metal Core Segmented Metal Core
.640
.845
1/2”
Black Only 100 Ft. Coils Material: PVC with Segmented Metal Core
Black & White 150 Ft. Coils Material: PVC with Segmented Metal Core
100 Ft. Coils
Material: Vinyl
.723
.500
Fits 3/4”
.080
5/8”
Material: Vinyl
809-349
15/32”
Black 500 Ft. Coils Material: Dense Neoprene Rubber
Fits 5/8” 808-750
.080
1/2”
1/2”
Black 500 Ft. Coils Material: Dense Neoprene Rubber
3/8”
5/16”
Black 500 Ft. Coils Material: Dense Neoprene Rubber
Fits 3/4”
3/4”
Black Only 100 Ft. Coils Material: PVC with Segmented Metal Core
NYLA-GLIDE GR™ PROFILE SHAPES Our profiles feature advanced mechanical & thermal properties by adding Molybdenum Disulphide to unmodified Nylon 6. The results are outstanding including: • superior wear resistance...especially over unfilled nylon and in many cases outwears metal - and are not vulnerable to fretting and galvanic corrosion • Superior Heat Resistance...these profiles resist distortion at temperatures over 300° F • Superior surface lubricity...making them ideal when lubrication is undesirable or impractical • Superior strength and rigidity...greater tensile and compressive strengths and the elastic modulus is increased more than 40%, making them more resistant to deformation under load • Superior dimensional stability...maintain better fits and clearances, since the linear coefficient of thermal expansion is less than that of unmodified Nylon • Greater wear resistance, strength and heat resistance than standard grades of Nylon • Maximum continuous temperature is 225° F. Color is dark gray
NG-0125
Fits 1/16”-1/8” 100 Ft. Coils .125 REF
.062 ±.015
.500 ±.031 .031 MAX
Nylon snap-on protection for rails
NG-0250 .250 ±.010
.055 ±.005
Fits 1/8”-1/4” 100 Ft. Coils
.500 ±.040
.050 MAX. GAP Nylon snap-on protection for conveyor rails
NG-0093
Fits 1/16”-3/32” 100 Ft. Coils
.156 .055 ±.005 .230 .105 .250
APPLICATIONS:
• Protect conveyor rails, beds and products from sliding surface friction with these molybdenum disulphide (MDS) filled strips • Also excellent as striker plates and liners. The strips require NO lubrication, and have less surface friction
NG-0187
Fits 1/8”-3/16” 100 Ft. Coils
NG-0062 .245 .220
Fits up to 1/16” 100 Ft. Coils .300 .345
.055 ±.005
.031 MAX. GAP
Nylon snap-on protection for conveyor rails
NG-0312
Fits 1/4”-5/16” 12 Ft. Lengths
.156 R. .635 .095
Nylon sheet metal protector
Nylon snap-on wear strip for conveyor systems
Nylon snap-on wear strip for conveyor systems
Cut Program Available
A-31
PLASTIC METALLIC CHANNEL MOULDING Finishes Available:
Polished Brass, Polished Chrome, Brushed Brass & Brushed Chrome
Please inquire as finishes vary from style to style
12 FT. LENGTHS
1964- Fits up to 1/16” 1999.025 .075
w/Glue Bead
.300 .330
.105 .125
1991- .195
.285 .315
.385 .405
Material: ABS/Mylar
Material: ABS/Mylar
.245 .275
Fits 3/4” .725 .695
.245 .275
.245 .215
.630 .650
.765 .735
Material: ABS/Mylar Film
Material: ABS/Mylar Film
Material: ABS/Mylar
Material: ABS/Mylar
Material: ABS/Mylar
Fits 5/8” 2414.590 .610
.505 .525
.480 .500
.240 .260
.205 .220
.210 .230
Fits 1/2” 2413.455 .475
.190 .120
.220 .240
Material: ABS/Mylar
Fits 3/8” 2412-
Fits 3/16” .175 .185
.170 .180
.210 .230
Material: ABS/Mylar
.320 .340
Fits 3/16” 2325-
Fits 3/16” 1982-
.732 .765
.135 .155
Fits 1/4” 2317-
.205
.170 .190
.280 .305
.260 .280
Bright Brass, Bright Chrome, Glossy Black, Glossy White 200 Ft. Coils Material: PVC/Film
Fits 1/8” 1962-
STAINLESS STEEL MIRROR MOULDINGS
SS900SP-P .015 THICK
12 FT. LENGTHS SS900-P
.015 THICK 1/4”
1/4” 1/4”
All Stainless Steel 430 Grade (magnetic)
SS914-P
.020 THICK
1/4”
3/8” 5/16”
SS907-P
.015 THICK
5/16”
SS900T-P
.020 THICK 1/4”
SS911-P
.023 THICK 3/8”
7/16”
13/32”
3/4”
9/32”
SS908-P
.023 THICK 9/32”
SS853-P
Inside Corner
SS852-P
(FOR 1/4” MATERIAL)
Outside Corner
7/8” FOR MORE CAP & DIVIDER MOULDINGS, SEE PAGES 34-39
A-32
P
FINISH CHART
Polished
Shiny / Mirror Finish.
Cut Program Available
1. STANDARD CUT- Rough cut to allow for small parcel shipping. 2. CUT TO SIZE - Achieves a higher tolerance.
SEE PAGE 9 FOR DETAILS
ALUMINUM CHANNEL MOULDINGS 12 FT. LENGTHS FINISH CHART
M Mill As extruded - may or may not have “scratches”/die lines. Dull Finish. S Satin - Clear Anodized Dull, Matte Finish.
ALU757-
Fits 1/8”
ALU257-
0.125
Fits 1/4”
Fits 9/32”
0.282
Fits 3/8”
ALU547-
0.439
0.376
0.375 0.500
0.406
Fits 7/16”
ALU847-
0.624
Fits 1/2” ALU3470.562
0.563 0.563
Fits 3/4”
Fits 3/4”
0.500
Fits 3/4” ALU157C-
Fits13/16”
0.125
ALU357-
1.000
Fits 7/8”
ALU448-
0.062
0.313
1.124
Fits 1”
0.812
0.062
1.000
0.938
Fits 1”
Fits 3/4”
1.000
0.876 0.062
0.313
0.758
0.750
1.000
0.814
0.062
ALU1041-S
0.125
0.875
0.882
1.000
ALUMINUM “NO BOW” SHELF CHANNEL
1.001
A 13/16”
.062 1.125
Fits 3/4”
0.500
0.865
0.313
0.750
0.062 0.750
ALU557-
ALU247-
0.751 0.045
0.312
0.750
0.500
ALU947-
0.775
0.062
0.375
0.062
0.500
ALU2161-S
Fits 5/8” 0.626
0.062
0.062
ALU447-
Fits 5/16” 0.312 0.094
0.938 0.375
0.219
ALU148-
0.062
0.375
0.297
0.313
ALU1257-
0.063
0.047
ALU57-
0.250
P Polished - Mechanical Shiny / Mirror Finish. BS Brushed Satin Lightly Brushed (shows grain), Satin Finish.
B 3/4” C 3/4”
Fits Shelf Size
1/8”
For 1/2”, 5/8”, & 3/4” Shelves 8 Ft. Lengths PART # SHF-A500-* SHF-A625-* SHF-A750-*
A B 45/64” 3/4” 27/32” 3/4” 15/16” 3/4”
C 1/2” 5/8” 3/4”
A-33
COLOR PLASTIC CAPPING 210A-BK Black 12 Ft. Lengths Material: PVC
616-BK-A 616-WH-A White - Black 8 Ft. Lengths Material: Styrene
P630-WH P630-BK White - Black 8 Ft. Lengths Material: Styrene
1032-WH 1032-BK White - Black 8 Ft. Lengths Material: ABS
652-WH 652-BK 652-BR White - Black Brown 8 Ft. Lengths Material: Styrene
Fits 1/64” 2384-WH W/ TAPE 2384-BK White - Black 8 Ft. Lengths Material: Rigid PVC
Fits 1/16” 600-BK W/ TAPE 600-WH 600-BR 600-SIL White - Black Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
Fits 1/8” 1135-BK 1135-WH White - Black 8 Ft. Lengths Material: ABS
Fits 1/4” P641-WH P641-BK White - Black 8 Ft. Lengths Material: Styrene
Fits 1/2” 652-WH-A 652-BK-A 652-BR-A White - Black Brown 8 Ft. Lengths Material: Styrene
Fits 1/16” 2384-BK-A 2384-WH-A White - Black 8 Ft. Lengths Material: Rigid PVC
Fits 1/8” 600-BK-A 600-WH-A 600-BR-A 600-SIL-A White - Black Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
Fits 1/8” 650-WH 650-BK 650-BR 650-SIL White - Black Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
Fits 1/4” P631-WH P631-BK White - Black 8 Ft. Lengths Material: Styrene
Fits 1/2” 4068-WH W/ TAPE 4068-BK White - Black 8 Ft. Lengths Material: Styrene
Fits 1/16” 616-WH W/ TAPE 616-BK 616-BR White - Black Brown 8 Ft. Lengths Material: Styrene
Fits 1/8” P640-WH W/ TAPE
Fits 1/8”
White 8 Ft. Lengths Material: Styrene
Fits 1/4” 650-BK-A 650-WH-A 650-BR-A 650-SIL-A
Fits 1/4”
W/ TAPE
White - Black Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
Fits 1/4” 2395-WH 2395-BK
Fits 1/2”
White - Black 8 Ft. Lengths Material: Rigid PVC
Fits 5/8” 4069-WH 4069-BK White - Black 8 Ft. Lengths Material: Styrene
Cut Program Available
SEE PAGE 9 ILS FOR DETA
A-34
Fits 1/16”
Fits 3/4”
P610-WH-A P610-BK-A
COLOR PLASTIC DIVIDERS
Fits 1/16” P610-WH P610-BK
White & Black
White & Black 8 Ft. Lengths Material: Styrene
883-WH 883-BK
1/8” Even Leg
Divider with 11/16” Legs
Brown thru Special Order
8 Ft. Lengths Material: Styrene
P611-WH P611-BK
1134-WH 1134-BK
Fits 1/8”
Fits 1/8”
White & Black
White & Black 8 Ft. Lengths Material: Styrene
Brown thru Special Order
8 Ft. Lengths Material: Styrene
1031-WH 1031-BK
White & Black 8 Ft. Lengths Material: ABS
P660-WH P660-BK P660-BR
Fits 1/16” 2383-BK-A 2383-WH-A
WITH TAPE
White, Black, Brown 8 Ft. Lengths Material: Styrene
Whtie & Black 8 Ft. Lengths Material: Rigid PVC
P601-WH P601-BK P601-BR P601-SIL
Material: Styrene (BK/WH/BR), PVC (SIL)
Fits 3/8” 4050-WH 4050-BK
White & Black 8 Ft. Lengths Material: Styrene
Cut Program Available
Fits 1/4”
White, Black, Brown, Silver 8 Ft. Lengths
White or Black 8 Ft. Lengths Material: ABS
1. STANDARD CUT- Rough cut to allow for small parcel shipping. 2. CUT TO SIZE - Achieves a higher tolerance.
Fits 1/8”
White, Black, Brown & Silver 8 Ft. Lengths Material: Styrene
Fits 1/4” P651-WH P651-BK P651-BR P651-SIL
Fits 5/16” 4158-WH 4158-BK
Fits 1/16”
WITH TAPE
Fits 1/16”
Whtie & Black 8 Ft. Lengths Material: Rigid PVC
P601-BK-A P601-WH-A P601-SIL-A
Fits 1/8”
WITH TAPE
White & Black 8 Ft. Lengths Material: Styrene
P651-BK-A P651-WH-A P651-SIL-A
Fits 1/4”
WITH TAPE
White, Black, Silver 8 Ft. Lengths
Material: Styrene (BK/WH/BR), PVC (SIL)
Fits 1/2” P750-WH P750-BK
White & Black 8 Ft. Lengths Material: Styrene
P751H-WH P751H-BK
2383-WH 2383-BK
Fits 3/4”
White & Black 8 Ft. Lengths Material: Styrene
3/4” Even Leg
White & Black 8 Ft. Lengths Material: Styrene
FOR DETAILS SEE PAGE 9
A-35
COLOR PLASTIC CAP & DIVIDER SETS 2384-WH 2384-BK
2383-WH 2383-BK
Fits 1/16”
White - Black 8 Ft. Lengths Material: Rigid PVC
616-WH 616-BK 616-BR
CAP
P610-WH P610-BK
Fits 1/16”
White - Black -Brown 8 Ft. Lengths Material: Styrene
(Brown Special Order)
DIVIDER
Fits 1/8”
White - Black - Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
1135-WH 1135-BK
White - Black 8 Ft. Lengths Material: ABS
DIVIDER
616-WH-A 616-BK-A 616-BR-A CAP
P601-WH P601-BK P601-BR P601-SIL
600-WH-A 600-BK-A 600-BR-A 600-SIL-A
DIVIDER
CAP
1134-WH 1134-BK
Fits 1/8”
CAP
650-WH 650-BK 650-BR 650-SIL CAP
Cut Program Available
SEE PAGE 9 ILS FOR DETA
A-36
WITH TAPE
Fits 1/16”
2383-WH-A 2383-BK-A
White - Black 8 Ft. Lengths Material: Rigid PVC
CAP
600-WH 600-BK 600-BR 600-SIL
2384-WH-A 2384-BK-A
WITH TAPE
Fits 1/16”
White - Black -Brown 8 Ft. Lengths Material: Styrene
WITH TAPE
Fits 1/8”
White - Black - Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
Fits 1/4”
White - Black - Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
P610-WH-A P610-BK-A
(Brown Special Order)
DIVIDER
P601-WH-A P601-BK-A P601-BR-A P601-SIL-A DIVIDER
P651-WH P651-BK P651-BR P651-SIL DIVIDER
COLOR PLASTIC CAP & DIVIDER SETS
650-WH-A 650-BK-A 650-BR-A 650-SIL-A
WITH TAPE
Fits 1/4”
White - Black - Brown - Silver 8 Ft. Lengths Material: Styrene (BK/WH/BR), PVC (SIL)
CAP
P651-WH-A P651-BK-A P651-BR-A P651-SIL-A
1032-WH 1032-BK
Fits 1/4”
White - Black 8 Ft. Lengths Material: ABS
CAP
DIVIDER
Fits 1/2”
652-WH 652-BK
4069-WH 4069-BK
A
DIVIDER
P750-WH P750-BK
Fits 3/4”
White - Black 8 Ft. Lengths Material: Styrene
CAP
B
4050-WH 4050-BK
White - Black 8 Ft. Lengths Material: Styrene
CAP
DIVIDER
B
Cut Program Available
B
SEE PAGE 9 ILS FOR DETA
846-CL 846-CL-CLA
DIVIDER
1031-WH 1031-BK
A
CLEAR PLASTIC CAP & DIVIDER SETS 2028-CL 2028-CL-CLA
WITH & WITHOUT CLEAR TAPE
Fits 1/8”
Clear 12 Ft. Lengths Material: Polyester
CAP
DIVIDER
2029-CL 2029-CL-CLA
WITH & WITHOUT CLEAR TAPE 2030-CL
2030-CL-CLA
Fits 1/4”
Clear 12 Ft. Lengths Material: Butyrate
DIVIDER
CAP
.215 .235 .790 .840
.430 .480
METALLIC PLASTIC CAPPING 1976-POL/C
.260 .280
Fits 5/32” 2469-POL/C 2469-POL/B 2469-BRU/C
.030 .035
.145 .165
.565 .585
Polished Chrome 12 Ft. Lengths Material: ABS/Film
.215 .235 .370 .400
Fits 1/4” 1949-POL/C
.485 .515
.240 .260
Polished Chrome, Polished Brass Brushed Chrome 12 Ft. Lengths Material: ABS/Film
Fits 1/4” 11340-B/C
Fits 1/8”
.240 .260
.365 .385
.730 .770
Polished Chrome 12 Ft. Lengths Material: ABS/Film
Brite Chrome
Brite Brass Thru Special Order
8 Ft. Lengths Material: ABS/Foil
A-37
CLEAR PLASTIC CAPPING Fits 1/64” 210-CL
12A-CL
Clear Film Tape
12 Ft. Lengths Material: Vinyl
23A-CL
12 Ft. Lengths Material: PVC
White Foam Tape
Fits 1/8”
White Foam Tape
Fits 1/8”
12 Ft. Lengths Material: Polyester
12 Ft. Lengths Material: Butyrate
CLEAR PLASTIC DIVIDERS
Fits 5/32” 2028-CL 2028-CL-CLA
12 Ft. Lengths Material: Butyrate
12 Ft. Lengths Material: Vinyl
Clear Film Tape
Fits 1/8”
Clear Film Tape
12 Ft. Lengths Material: Polyester
Fits 1/64”
Fits 3/32” 846-CL 846-CL-CLA
Fits 3/32” 847A-CL
Earring Card Holder
2033-CL
23-CL
12 Ft. Lengths Material: PVC
12 Ft. Lengths Material: Butyrate
12 Ft. Lengths Material: Vinyl
Fits 1/64”
Clear Film Tape
Fits 1/64” 847-CL
Clear Film Tape
846A-CL
Fits 1/64” 210A-CL
2029-CL 2029-CL-CLA
Fits 1/4”
Clear Film Tape
12 Ft. Lengths Material: Butyrate
12 Ft. Lengths Material: Butyrate
PLASTIC JOINER MOULDINGS P2658
Fits 1/4” P2718
DIVIDER .050 WALL THICKNESS
BUTYRATE/CLEAR • 8 FT. LENGTHS Fits 1/4” P2719
2 WAY CORNER .050 WALL THICKNESS
Fits 1/4” P2720
3 WAY CORNER .050 WALL THICKNESS
Fits 1/4” P2743
4 WAY CHANNEL .060 WALL THICKNESS
Fits 1/4”
U CHANNEL .060 WALL THICKNESS .750 .250
A-38
ALUMINUM CAPPING M S
FINISH CHART
Mill As extruded- may or may not have “scratches”/die lines. Dull Finish. MH= With Holes P Satin- Clear Anodized Dull, Matte Finish. SH= With Holes BS
ALU2334-S
Fits 1/16” 12 Ft. Lengths
.188
.068
.187
ALU0214-S
Fits 3/32” ALU7441-S
.244 .110
.200
.718
Polished-Mechanical Shiny/Mirror Finish. PH= With Holes Brushed Satin Lightly Brushed (shows grain). Satin Finish.
12 Ft. Lengths
Fits 1/8” to 5/32” w/Punched Holes 12 Ft. Lengths
.244
.144
.234
.700
.700
ALU0204-S
Fits 1/16” 12 Ft. Lengths
.187” .156”
.0625” .718”
Hole/slot pattern Approx. Every 4”
ALU851-
.380
Hole/slot pattern Approx. Every 4”
Fits 1/4” to 9/32”
.375 .875
w/Punched Holes 12 Ft. Lengths
ALU961-
1.365
Hole/slot pattern Approx. Every 4”
Fits 1/4” to 9/32” ALU1851-
.625 1.188
.375
12 Ft. Lengths
1.00 .510
.281
.280
Fits 1/2”
1.650
w/Punched Holes 12 Ft. Lengths
ALUMINUM DIVIDER ALU0023-S
Fits 1/16” ALU5044-S
.313 .070
.15
12 Ft. Lengths
.200
.10
12 Ft. Lengths
Fits 1/8” to 5/32”
.500 .168
Fits 1/4” to 9/32” ALUT155-S
ALU850-
12 Ft. Lengths
.291
Fits 1/4” to 9/32” ALU1850-
.308
.500
Fits 1/2”
12 Ft. Lengths 1.325
1.00
.370
12 Ft. Lengths
1.250
1.25
1.00
1.250
Fits 3/32” ALU849-
.625
12 Ft. Lengths
.514 .500
.651
.424
STAINLESS STEEL CAP CORNER & DIVIDER SS1450-P DIVIDER 12 Ft. Lengths
Available in Polished only Fits 1/16”
SS1451-P CAP 12 Ft. Lengths
Punched with holes- spacing approx. 4-6”
All Stainless steel 430 grade (Magnetic) Fits 1/16”
SS851-P
Fits 1/4”
CAP 12 Ft. Lengths Punched with holes- spacing approx. 4-6”
A-39
ALUMINUM OUTSIDE CORNERS
12 Ft. Lengths - Satin Finish • Fits 3/4” Panel Boards ALU5164-S
N EW
90° angle
!
.316
ALU5299-S
ALU5116-S
.250
.090
.750
+.011 .282 -.007
.211 .099
.282
90° angle
.060
M
P
.040
.500
ALU5272-S .750 .282
.434
.375
90° angle
ALU5162-S
135° angle
1.250
Mill
As extruded - may or may not have “scratches”/die lines. Dull Finish.
Polished - Mechanical
Shiny / Mirror Finish.
Dull, Matte Finish
S
45 .750
.062
ALU5163-S
FINISH CHART
R= .052
.065
1.750
90° angle
1.500 1.000 .250
.250
2.750
PATENT #4840440
Satin - Clear Anodized
ALU5165-S .812
.090 .011/-.007
1.500
.500
.765
.500
2
90 45
90
ALUMINUM CORNERS
ALU7792-
Fits 1/16”
Inside Corners • 12 Ft. Lengths
ALU853-
Fits 9/32”
ALU1853-
Fits 1/2”
ALU1855.790
.852
.070
ALU7791-
Fits 1/16”
.770
Outside Corners • 12 Ft. Lengths
ALU852-
Fits 9/32”
ALU1852-
Fits 1/2”
ALU1854.754
.754 .770
A-40
Fits 3/4”
Fits 3/4”
PLASTIC CORNER CHANNEL MOULDINGS 90° Corner Channel
107-680-
Fits 1/16”
107-681-
Part Tapers For Friction Fit
.070
.375”
Black - White STYRENE - 12 FT. LENGTHS
90° .375
.060”
Fits 1/8”
Fits 1/16”
Color Clear Others Available Min. Apply STYROLUX 8 FT. LENGTHS
.050”
.300”
.375
184-
Gloss finish closely matches acrylic and PETG sheets
.125”
107-685-
Fits 1/4”
.135
3/8” 27/32”
.622
Black - Brown - White STYRENE - 12 FT. LENGTHS
.060 .367
.135
1/4” PANEL 1/4”
.120
.622
107-664-
Fits 1/4”
1/2”
Black - Brown - White POLYPROPYLENE 12 FT. LENGTHS
27/32”
107-687-
Fits 1/2” 3/4”
1/4” .045
1/2”
Black - White STYRENE - 8 FT. LENGTHS
1-3/8”
Black - Brown - White ALSO AVAILABLE IN DOVE GRAY STYRENE - 8 FT. LENGTHS
90° 5/8”
3/16”
107-688-
Fits 5/8”
107-689-
23/32”
Fits 3/4” 3/4”
Black - White Brown available - 5000 Ft. Minimum STYRENE - 8 FT. LENGTHS
5/8”
1-27/64”
3/4”
1-11/16”
Black - White Brown available - 5000 Ft. Minimum STYRENE - 8 FT. LENGTHS
3/4”
3/4”
107-665-
60° Corner Channel Fits 1/4”
1/4”
107-667-
Fits 1/2” 3/4”
1/2”
Black - White Brown available 5000 Ft. Minimum STYRENE - 8 FT. LENGTHS
17/32”
Black - White Brown available 5000 Ft. Minimum STYRENE - 8 FT. LENGTHS
3/16” .060
3/64”
Cut Program Available
2. CUT TO SIZE - Achieves a higher tolerance. 1. STANDARD CUT • Must be quoted per order. Rough cut to allow for small parcel shipping. • We require written purchase orders for cut to size orders. • Quantities are limited per profile. • No more that 2 cuts per length (On a 12 ft. length - 6 ft. and 6 ft. or 8 ft. and 4 ft., etc.). • Costs vary by product and material. • All cuts have a tolerance of +/- 1 inch. • A 40% restocking fee applies on all returns unless our error.
• Tolerance are higher (+/- 1/8” or +/- 1/16”). • Quantities can be any amount (100 pcs. @ 14-7/8” or 50 pcs. @ 84-11/16”). • If tolerances allow, we will cut stock lengths to various sizes (on a 12 ft. length to 17-1/4”, 69-5/16” and 56-1/8”. • Costs vary by product and material. • Waste will be shipped only if requested. • No miter cuts. • No returns allowed, unless our error.
A-41
ALUMINUM SHOWCASE MOULDINGS 12 Ft. Lengths ALU153-
FINISH CHART M
Mill A s extruded - may or may not have “scratches”/die lines. Dull Finish.
P
Polished Shiny / Mirror Finish.
S
Satin Dull, Matte Finish.
ALU235-P
ALU701-S
ALU113-P
ALUMINUM OVERLAP FACE NOSINGS WITH HOLES - 12 FT. LENGTHS
Part #
Countersunk Holes
ALU968ALU228ALU128ALU28ALU328ALU428-
Hole Underlip Overall Spacing A B 6” 7” 7” 6” 6” 7”
5/8” 3/4” 7/8” 1-1/16” 1-1/4” 1-5/8”
11/16” 13/16” 15/16” 1-1/8” 1-5/16” 1-11/16”
ALUMINUM ROUNDED TRIM 12 FT. LENGTHS WITH COUNTERSUNK HOLES 6” ON CENTER
B
FINISHES AVAILABLE IN MILL AND CLEAR SATIN
Countersunk Holes
A
PART # ALU436-* ALU437-* ALU438-* ALU439-*
A 3/8” 1/2” 3/4” 1”
B 5/32” 3/16” 3/16” 3/16”
ALUMINUM EDGE TRIM 12 FT. LENGTHS WITH COUNTERSUNK HOLES 6” ON CENTER FINISHES AVAILABLE IN MILL AND CLEAR SATIN
A B C
A-42
Countersunk Holes
PART # ALU427-* ALU429-*
A 3/8” 3/8”
B 3/16” 3/16”
C 15/16” 1-11/64”
Lip C
1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
With holesspacing approx. 6-7”
ALUMINUM PANEL CLIPS Cabinet
• Mill Finish • Available In Pre-Cut Pieces and Lengths Pre-Cut 2” Pieces With 2 Punched Holes
0.120
(Approximately 1-1/2” Apart)
0.360
PART #
ALU211-2-M 1.595
4’ & 8’ Lengths (Without Holes)
PART #
Wall
ALU211-4 ALU211-8
“A FAST, EASY, & COST EFFECTIVE METHOD OF HANGING CABINETS,
0.125
WALL PANELS, PARTITIONS, & SIGNAGE!”
Pre-Cut 2” Pieces With 2 Punched Holes (Approximately 1-1/2” Apart)
(Approximately 1-1/2” Apart) PART #
ALUHAC22-2-M
12’ Lengths
2.25
PART #
0.750
(Without Holes)
ALU111-2-M 1.785
4' 8'
Pre-Cut 2” Pieces With 2 Punched Holes
0.750 0.092
LENGTH
PART #
ALUHAC22-M
4’ & 8’ Lengths (Without Holes)
PART #
ALU111-4 ALU111-8
LENGTH
4' 8'
Pre-Cut 2-1/2” Pieces With 2 Punched Holes (Approximately 1-3/4” Apart)
0.440
0.115
0.375
Pre-Cut 2” Pieces With 2 Punched Holes (Approximately 1-1/2” Apart)
(Without Holes)
ALU112-4 ALU112-8
4’ & 8’ Lengths (Without Holes)
ALU112-2-M
PART #
0.250
1.750
PART #
4’ & 8’ Lengths
1.375
PART #
ALUHA4049-25-M
PART #
0.250
ALUHA4049-4-M ALUHA4049-8-M
LENGTH
4' 8'
LENGTH
4' 8'
Pre-Cut 2” Pieces With 2 Punched Holes (Approximately 1-1/2” Apart)
1.00
PART #
ALUHAC23-2-M 2.00
12’ Lengths
(Without Holes) PART #
ALUHAC23-M
A-43
PLASTIC CLEAR RIGHT ANGLE MOULDING 519-CL 12 Ft. Lengths
520-CL
.470/ .530
1755-CL 12 Ft. Lengths
1/2”
approx. 095 thickness
1”
12 Ft. Lengths
3/4”
1”
1750-CL 12 Ft. Lengths
1-1/4”
approx. 100 thickness 1-1/4”
PLASTIC COLOR ANGLE W/ADHESIVE 2206A-
1/4” FOAM TAPE
.320
2”
1749-CL
approx. 070 thickness
3/4”
12 Ft. Lengths
Cut Program Available
approx. 095 thickness
2”
1/2”
12 Ft. Lengths
.405/ .465
approx. 040 thickness
Material: Butyrate 1748-CL
SEE PAGE 9 FOR DETAILS
.450
Fits 5/16” x 7/16” White - Black 12 Ft. Lengths Material: Styrene W/ TAPE
PLASTIC METALLIC ANGLE MOULDINGS W/ADHESIVE Finishes Available: Polished Brass, Polished Chrome, Brushed Brass & Brushed Chrome.
2406
Fits 3/8”
2407-
PSA TAPE
.365/ .385
Please inquire as finishes vary from style to style
Fits 1/2” PSA TAPE 1/4”
.490/ .510
.200
2409-
.345/ .365
.740/ .760
2163.995 1.025
PSA TAPE
1/2”
.240/ .260
W/O TAPE
W/ TAPE 12 Ft. Lengths Material: ABS/Mylar
12 Ft. Lengths Material - ABS/Mylar
12 Ft. Lengths Material - ABS/Mylar
.750/ .770
.300 .320
W/ TAPE
W/ TAPE
12 Ft. Lengths Material - ABS/Mylar
2001-
.720/ .740
.470/ .490
W/ TAPE
Fits 3/4”
12 Ft. Lengths Material: ABS/Mylar
ALUMINUM AND STAINLESS STEEL COVE MOULDING FINISH CHART
M Mill As extruded - may or may not have “scratches”/die lines. Dull Finish. S Satin Dull, Matte Finish with no die lines (Velo Clear).
P Polished Shinny / Mirror Finish. BS Brushed Satin Lightly Brushed (shows grain), Satin Finish.
Reverse cove moulding is used to cover up seams or joints wherever two perpendicular planes meet. The sink top to its backsplash or the ceiling to a wall surface represent typical applications for which our reverse cove moulding was designed. The leg of the profile seals tightly against both surfaces to lend a cleanly trimmed appearance to the finished product.
ALUMINUM
ALU141-PH
12 Ft. Lengths with Holes
ALU121-PH
ALU1016-PH
ALU426-S
Not Available With Holes
ALU441-PH
3/16”
Punched holes spacing every 4-1/2”.
Polished Finish
5/16”
Counter sunk holes spacing every 6-1/2”.
Polished or Brushed SatinFinish
A-44
5/8”
Polished Finish with holes
Polished Finish
ALU669-
Counter sunk holes spacing every 6-1/2”.
1/16”
Counter sunk holes spacing every 7”.
STAINLESS STEEL Grade 430
SS799-P
(Magnetic)
Back Splash Cove (Long Flange, Narrow Overlap) 12 Ft. Lengths
Polished Finish
We can also supply custom orders without holes minimums apply please inquire.
Satin Finish
Polished Finish
STAINLESS STEEL COUNTER EDGE SNAP ON MOULDINGS 9/16”
12 Ft. Lengths - Polished Finish SS801A-P
Grade 430
(Magnetic) 1”
25/32”
PLASTIC COLOR RIGHT ANGLE MOULDING
White - Black - Brown Material: Styrene
(approx. .100 thickness)
1-1/2”
1-1/4”
1-1/4”
12 Ft. Lengths
(approx. .100 thickness)
.055
.125
1952-
12 Ft. Lengths
(approx. 045 thickness)
(approx. .100 thickness)
135
60 1”
1-1/2”
1-1/2”
White - Black Material: Styrene
1951-
12 Ft. Lengths
1-1/2”
85 /88
1” White - Black - Brown Material: Styrene
White - Black - Brown Material: Styrene
1940-
12 Ft. Lengths
1” 3/4”
5/8”
1938-
12 Ft. Lengths
(approx. .100 thickness)
3/4”
1/2”
1937-
12 Ft. Lengths
(approx. .075 thickness)
5/8”
White - Black Material: Styrene
1936-
12 Ft. Lengths
(approx. .060 thickness)
1/2”
.250” White - Black Material: Styrene
1935-
12 Ft. Lengths
(approx. .055 thickness)
.050
.250”
1934-
12 Ft. Lengths
White - Black - *Brown
1”
*NON STOCK - MINIMUMS APPLY-
White - Black
White - Black Material: Styrene
PLEASE INQUIRE
RIGID PVC
Material: Styrene
Cut Program Available
1”
1933-
12 Ft. Lengths
1”
1919-
White - Black Material: Styrene
SEE PAGE 9DETAILS FOR
PLASTIC COLOR UNEVEN ANGLE MOULDINGS 2206- Fits 5/16” x 7/16” 1920- Fits 1/2” x 1” 1441- Fits 1-1/4” x 1/4” 1921.320
1-1/4”
1”
White - Black 12 Ft. Lengths Material: Styrene
Cut Program Available
.062
1”
1.000
White - Black 12 Ft. Lengths Material: Styrene
White - Black 12 Ft. Lengths Material: Styrene
White - Black 12 Ft. Lengths Material: Styrene
White - Black 12 Ft. Lengths Material: Styrene
R0.015
.040
1/4”
.5”
Fits 1” x 3”
3.000
2”
.040
.450
Fits 1” x 2” 1922-
SEE PAGE 9DETAILS FOR
PLASTIC FLEXIBLE UNEVEN ANGLE MOULDINGS 807-631-BK
Fits 1/2”
807-555-BK
.500
Fits 3/4”
.750
.110
.086 .296
Adhesive
Black 150 Ft. Coils Material:PVC
.110 Adhesive Black 100 Ft. Coils Material:PVC
807-591-BK
.260
Adhesive
.875
Fits 7/8”
.260
Black 50 Ft. Coils Material:PVC
A-45
ALUMINUM EVEN ANGLE MOULDINGS M P S
ALU269-
FINISH CHART
Mill
ALU269-18-
Fits 1/2” x 1/2”
As extruded - may or may not have “scratches” die lines. Dull Finish.
.062
.500
Polished - Mechanical Shiny / Mirror Finish.
12 Ft. Lengths
.125
.500
Fits 3/4” x 3/4” 12 Ft. Lengths .750
12 Ft. Lengths
.0625 .750 .750
.500
.500
Satin - Clear Anodized
ALU369-
Fits 1/2” x 1/2”
Dull, Matte Finish.
BS Brushed Satin
Lightly Brushed (shows grain), Satin Finish.
ALU449-
ALU136-
Fits 3/4” x 3/4” .125
.750
12 Ft. Lengths
ALU469-
Fits 13/16”x 13/16” .813
.750
.063
12 Ft. Lengths
1.000
.813
ALU5569-
Fits 1-1/4” x 1-1/4” 12 Ft. Lengths
1.250
ALU1569-
.062
Fits 1-1/2” x 1-1/2”
12 Ft. Lengths
1.500
.125
1.500
1.500
12 Ft. Lengths
12 Ft. Lengths
2.000
.125
2.000
1.500
2.000
ALU4469-316Fits 2” x 2”
Fits 1-1/2” x 1-1/2”
.125 .1875
Fits 2” x 2”
.062
ALU1569-316-
Fits 1” x 1”
ALU846912 Ft. Lengths
2.000
.062 1.250
Fits 2” x 2”
.125
12 Ft. Lengths
1.250
ALU4469-
12 Ft. Lengths
.062
ALU749-316-
1.000
Fits1-1/4” x 1-1/4”
12 Ft. Lengths
1.000
ALU1569-18-
Fits 1-1/2” x 1-1/2”
1.250
1.000
12 Ft. Lengths
ALU569-
Fits 1” x 1”
1.000
.125
12 Ft. Lengths
ALU749-
Fits 1” x 1”
1.500 .125 .1875
12 Ft. 2.000 Lengths
.1875 .125
1.000
2.000
1.500
ALUMINUM UNEVEN ANGLE MOULDINGS ALU149-
ALU249-
Fits 1/4” x 1/2”
Fits 3/8” x 3/4” .050
.250 .500
12 Ft. Lengths
A-46
ALU669-
Fits 1/2” x 13/16”
.062
.375 .750
12 Ft. Lengths
12 Ft. Lengths
ALU904Has Counter Sunk Holes 6-1/2”
Fits 1/2” x 1” .062
.500 1.000
PLASTIC PANEL HINGE
103-634- Fits 1/8” Panels 103-571- Fits 3/16” Panels 103-635- Fits 1/4” Panels 103-637- Fits 3/8” Panels 103-4175- Fits 1/2” Panels
Polypropylene 12 Ft. Lengths Black, White & Brown
108-640-
Polypropylene 12 Ft. Lengths Black, White & Brown
108-641-
Fits 1/8” Panels
PVC Black, White & Clear
Polypropylene 12 Ft. Lengths Black, White & Brown
Fits 3/16”-1/4” Panels
PVC Black, White & Clear
Polypropylene 12 Ft. Lengths Black, White & Brown
P4506-CL
Fits 3/16” Panels
PVC - Clear Clear with White Web
Polypropylene 12 Ft. Lengths Black, White & Brown
P4440-CL
Fits 1/4” Panels
PVC - Clear Clear with White Web
PLASTIC TEE HINGE 103-631-
For 1/2” Panel
Polypropylene 12 Ft. Lengths Black, White & Brown USE S055 SLOTTER
103-630-
For 5/8” Panel
103-632-
For 3/4” Panel
Polypropylene 12 Ft. Lengths Black, White & Brown USE S1/S7 SLOTTER
Polypropylene 12 Ft. Lengths Black, White & Brown USE S1/S7 SLOTTER
FLAT HINGE 103-639-
.035/.045 Thick - Polypropylene 100 & 500 Ft. Coils Black, White & Brown
9888H
CLEAR P.E.T.G./PVC with glue groove 5 Ft. Lengths
p4169-CL
103-638-
.086 Thick - PVC 100 Ft. Coils - Clear with White Web
.062/.070 Thick - Polypropylene 100 & 500 Ft. Coils Black, White & Brown
696H CLEAR ACRYLIC/PVC 5 Ft. Lengths
A-47
PLASTIC SLIDING DOOR TRACK POLYPROPYLENE - WHITE & BROWN - 12 FOOT LENGTHS K101-4079
UPPER TRACK For: K101-606, K101-610, K101-601
K101-4079STYRENE
LOWER DOUBLE FLAT TRACK For 5/8” Doors
K101-606-
LOWER DOUBLE FLAT TRACK For 3/4” Doors
LOWER SINGLE FLAT TRACK
K101-601-
K101-610-
BROWN, WHITE, BLACK, ALMOND
100/500’ coils
R26-62 K101-610
NYLON NON-LOCKING GLIDES
Nylon Glides Are Recessed Into The Door
R26-62BE
1/4” x 1/4” x 1”
For Use with: K101-606 K101-610 K101-601
Mounts onto 1/4” mortise on the bottom of each door with a brad nail
180-
No Glides or Wheels Needed – For Light Weight Doors
For 1/8” Doors
*5/32” gap Styrene White - Black - Brown 12 Ft. Lengths
140-
For 1/4” Doors
120-
For 1/2” Doors
*9/16” gap
*5/16” gap Styrene White - Black - Brown Also Available in Beige 12 Ft. Lengths
340-
For 3/4” Doors
*13/16” gap
Styrene White - Black - Brown Also Available in Beige 12 Ft. Lengths
R101-603-BR
For 3/16”-1/4” glass/panel Anti-Rattle Feather Track Polypropylene - Brown 12 Ft. Lengths
Styrene White - Black - Brown Also Available in Beige 12 Ft. Lengths
NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.
PLASTIC MIRACLE TRACK SLIDING DOOR TRACK SYSTEM WITH WHEELS
12 Ft. Lengths - Available in Silver Gray & Black
MT38-
For 1/4” Doors
MT39-SG
For 1/4” Doors
HIGH QUALITY EASY-ROLL METAL BALL BEARINGS WITH ECONOMY OF PLASTIC TRACK. CASE PRICES Complete - 2 Tracks, 1 Dual Wheel Per Running Ft.
NOTE: Rough Opening Less 7/8” = Door Size
For additional wheels, order Part #MTR
PLASTIC MIRACLE TRACK II
SLIDING DOOR TRACK SYSTEM WITH WHEELS 12 Ft. Lengths - Available in Silver Gray
• Lower track has sidewalls to prevent rollers from slipping off track • 1” (25.4mm) shoe allows superior gripping of glass or plywood doors. • Deep upper track to allow extra clearance and easy installation. • Zinc plated rollers with plastic wheel. • Track & shoe material is rigid PVC.
- OUR MOST POPULAR ASSEMBLYComplete Set Consists Of: 1 x 12 Ft. Length Upper Track 1 x 12 Ft. Length Shoe 1 x 12 Ft. Length Lower Track 1 Wheel Per Running Ft.
A-48
For additional wheels, order Part #MTR2
ALUMINUM SLIDING DOOR TRACK 12 FOOT LENGTHS
ALU7474-M
M
FINISH CHART
Mill As extruded - may or may not have “scratches”/die lines. Dull Finish.
ALURC4-12
Galvinized Steel
Wheels every 4-1/2”. Use 2/3 of the track with wheels. Example:
6 ft. opening use 4 ft. of roller system.
ALUSH2-12
For Up to 1/4”Doors Galvinized Steel
ALUT18-M
For 1/8” Doors
ALUT14-M
For 1/4” Doors
ALUT12-M
For 1/2” Doors
No Glides or Wheels Needed
ALUT34-M
For 3/4” Doors
ALUT134SP-M For 3/4” Doors
ULTRA PILE DUST SEAL/WEATHERSEAL w/ADHESIVE SELF SUPPORTING PILE IS ALWAYS ON CENTER AND HAS THE INTEGRITY AND CONSISTENCY TO ENSURE A TIGHT SEAL.
50' Minimum Coil
MANY APPLICATIONS: Windows Doors Showcases PART# DESCRIPTION COLOR DS-150-GY .270 W x .150 H Gray DS-200-GY .270 W x .200 H Gray
A-49
VINYL WALLBASE BASEBOARD MOULDINGS
A
B
C
D
E
FEATURES:
PROFILE:
• Full .080” gauge. • Co-extruded. • Heavier wear layer. • Precision cut ends. • Shrink free. • No blanching. • Abrasion resistant. • Washable surface. • Soft and workable. • Contemporary colors. • Inside and outside corners made easily.
F
G
A B C D E F G H I J K L
H
PART # BB-448-210 BB-448-220 BB-448-410 BB-448-310 BB-448-300 BB-448-320 BB-448-800 BB-448-500 BB-448-600 BB-448-950 BB-448-400 BB-448-100
Custom Colors Available 3000 Ft. Minimum, Please Inquire.
C D F K L
MSDA AVAILABLE UPON REQUEST
ADHESIVE
I
CARTRIDGE PART # WB-ADH-C
WHITE ACRYLIC LATEX ADHESIVE, QUICK-DRYING &NON-FLAMMABLE.
J
COLOR Cocoa Beige Almond Pewter Charcoal Silver Mauve Seagreen Wedgewood Wine White Black PART # BB-648-410 BB-648-310 BB-648-320 BB-648-400 BB-648-100
K
L
DESCRIPTION HEIGHT (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” COLOR Almond Pewter Silver White Black
DESCRIPTION HEIGHT (100 ft. coils) 6” (100 ft. coils) 6” (100 ft. coils) 6” (100 ft. coils) 6” (100 ft. coils) 6”
QUART
GALLON
PART # WB-ADH-Q
PART # WB-ADH-G
U.S. FEDERAL SPECIFICATIONS:
.080” gauge Vinyl Wallbase conforms to all requirements of Federal Specification #SS-W-40A Type 2 Vinyl Plastic: .080” Thickness. Class 1 Vinyl Chloride. FLAME SPREAD AND SMOKE DEVELOPMENT RESULTS:
Wallbase has a Flame Spread Index of 20 and Smoke Development Value of 290. Test results, calculated in accordance with ASTM-E84-912. The National Fire Protection Association Life Safety Code 101, Section 6-5.3, “Interior Wall and Ceiling Finish Classification”, classifies materials with respect to Flame Spread and Smoke Development. When tested in accordance with NFPA 255, Vinyl Wallbase gained a Class A rating.
VINYL CARPET/FLOOR MOULDINGS BLACK - 12 FT. LENGTHS 1/4” Carpet Reducer
PART # CT-250-BK
Transition reducer for glue down carpets; with 1/4” undercut.
A-50
ADJUSTABLE PANEL / GLASS RETAINER 1/16” - 1/8” - 1/4” Material- RPVC 12 Ft. Long
Outside Look
Insert May Be:
• Glass • Markerboard • Tackboard • Expanded Metal Grilles • Woven Wire Grilles • Decorative MDF Screening Panel
6500-*
(Sold In Sets)
Inside Look
Outside Retainer 1.025”
G L A S S
.720” .075”
Frosty White (*FW) Light Beige (*LB)
.820”
Insert Front
Back View
Available Colors
6500-*
Inside Retainer
View
Platinum (*PLT)
.375”
Door Frame
.400”
PVC Retainer Strip
PANEL RETAINER STAPLE TYPE - Vinyl • Black, Brown, White - 100 / 500 Ft. Coils 102-625-
102-680-
102-627-
* Brown only
102-681-
102-645-
102-624-
102-620-
^ Available in 100’ coils (Add -100 after part #)
102-698-
* Brown only
102-644-
102-778-
102-623-
^ Available in 100’ coils (Add -100 after part #)
* Brown only
^ Available in 100’ coils (Add -100 after part #)
GROOVE TYPE - Vinyl • Black, Brown, White - 500 Ft. Coils 102-648-
* Brown & Black
102-621-
13 32
.455 .520
.150 .170
Use S4 - S10 Slotter
^ Available in 100’ coils (Add -100 after part #)
102-646.410 .165
.415 .165
Use S4 Or S10 Slotter
.150 .170
* Brown only .520 .590 .145 GROOVE .130 SIZE
Use S4 Or S10 Slotter
^ Available in 100’ coils (Add -100 after part #)
(#102-648 is also available in Fruitwood; #102-621 is also available in Fruitwood & Clear)
A-51
IMPACT PROTECTION SYSTEMS Impact Protection can be found in a variety of settings, from hospitals and nursing homes, to colleges, offices, casinos, hotels and warehouses. Our handrails, wall guards, corner guards and door/frame protection come in a multitude of colors, profiles and materials. Choose from stainless steel, aluminum, wood, PVC or combinations of materials to match the protection level your environment requires while at the same time complementing dĂŠcor.
COLOR CHART
Add appropriate color code to part number.
#301 Linen White #5 Gray
#1 Black
#411 Pumice
#361 Pearl
#193 Wheat
#21 Cappuccino
#676 Dover White
#718 Silkworm
#29 Blue Ice
#113 Toffee
#22 Wodlands
#694 Cafe' Au Lait
#554 Misson White #541 White Sand
#370 Eggshell
#555 Porcelain
#313 Champagne
#2 Ivory
#648 Monterey
#497 Chablis
#238 Bone
#268 Doeskin
#148 Desert Sand
#3 Tan
#379 Mojave Sand #176 Taupe
#483 Harvard Gray #682 Khaki Brown
#486 Caisson
#288 Mocha
#297 Chinchilla
#385 Beige Desert
#210 Silver Gray
#289 Pearl Gray
#263 Pale Yellow
#569 Saffron
#204 Shell
#304 Victorian Rose
#494 Lavender Heather
#359 Ginger Spice
#366 Soft Peach
#269 Ecru
#381 Dawn
#10 White
#376 Pale Jade
#377 Teal
#382 Stormy Blue
#369 Blue Fog
#373 English Rose #265 Windsor Blue #490 Blue Bird
#583 Alexis Blue
#520 Brittany Blue
#293 Sea Foam
#300 Grotto
#156 Hunter Green #380 Cordovan
#4 Brown
#371 Sage Green
Special Colors - Several colors have been matched - please inquire for colors, costs & delivery. Custom Colors - 500 Ft. minimum order for color matching. Color & setup charges are on a per run basis. Please inquire. Installation - Normally with screws, molly bolts or toggle bolts. Most sold separately. NOTE: Due to fading, discoloration & paper aging, the colors on this page may vary from the actual colors. Please request samples before placing your order for color accuracy.
A-52
IMPACT PROTECTION SYSTEMS FOR COLORS SEE PAGE 52.
CG-10 & CG-20 CORNER GUARD
MATERIAL: Textured Vinyl Cover with Aluminum Retainer WING PROTECTION DIMENSION PART # LENGTH * LEVEL ANGLE "A" CG-10-XX-4 4 Ft. CG-10-XX-8 8 Ft. 3" Medium CG-10-XX-9 9 Ft. to 90˚ CG-20-XX-4 4 Ft. Heavy CG-20-XX-8 8 Ft. 2" CG-20-XX-9 9 Ft. * 10 Ft. & 12 Ft. lengths are available - please inquire
Aluminum Retainer • mill finish • alloy 6063-T6 • 0.062” thick
VINYL COVER THICKNESS DIMENSION "B"
Fasteners - sold separately
.100"
(B) Vinyl Cover
.085"
Overall Projection 3/8” TC-10/TC-20 Top/Bottom Closure Cap
5/16”
TOP/BOTTOM CLOSURE CAPS PART # TC-10-XX TC-20-XX
1/4” Radius
(A)
CLASS A FIRE RATING
Drywall Screw
USE WITH CG-10CG-20-
Need a fastener & anchoring solution? see page
267 for Screws & 266 Toggler® Anchors
CG-12 , CG-13, CG-14 & CG-34 CORNER GUARD
MATERIAL: Textured Vinyl Cover, Available with or without Adhesive Drilled options available, please inquire CLASS A FIRE RATING
PART # CGT-34-XX-4 CGT-34-XX-8 CGT-34-XX-12 CGT-12-XX-4 CGT-12-XX-8 CGT-12-XX-12 CGT-13-XX-4 CGT-13-XX-8 CGT-13-XX-12 CGT-14-XX-4 CGT-14-XX-8 CGT-14-XX-12
WITH ADHESIVE LENGTH 4 Ft. 8 Ft. 12 Ft. 4 Ft. 8 Ft. 12 Ft. 4 Ft. 8 Ft. 12 Ft. 4 Ft. 8 Ft. 12 Ft.
PROTECTION LEVEL
Medium to Heavy
ANGLE
WING DIMENSION "A"
VINYL COVER THICKNESS RADIUS DIMENSION DIMENSION "B" "C"
3/4"
.080"
1/8"
.080"
1-1/2"
.080"
1/8"
.080"
3"
.093"
3/16"
.093"
4"
.093"
3/16"
.093"
90˚
WITHOUT ADHESIVE
(A) (C)
(B)
(D)
PART # CGU-34-XX-4 CGU-34-XX-8 CGU-34-XX-12 CGU-12-XX-4 CGU-12-XX-8 CGU-12-XX-12 CGU-13-XX-4 CGU-13-XX-8 CGU-13-XX-12 CGU-14-XX-4 CGU-14-XX-8 CGU-14-XX-12
LENGTH 4 Ft. 8 Ft. 12 Ft. 4 Ft. 8 Ft. 12 Ft. 4 Ft. 8 Ft. 12 Ft. 4 Ft. 8 Ft. 12 Ft.
PROTECTION LEVEL
Medium to Heavy
OVERALL PROJECTION DIMENSION "D"
ANGLE
WING DIMENSION "A"
VINYL COVER THICKNESS RADIUS DIMENSION DIMENSION "B" "C"
OVERALL PROJECTION DIMENSION "D"
3/4"
.080"
1/8"
.080"
1-1/2"
.080"
1/8"
.080"
3"
.093"
3/16"
.093"
4"
.093"
3/16"
.093"
90˚
A-53
IMPACT PROTECTION SYSTEMS FOR COLORS SEE PAGE 52.
CG-50, CG-51, CG-52, CG-55, CG-60, CG-65 CORNER GUARD MATERIAL: #4 Satin Finish 304 Grade Stainless Steel
(A)
Ideal for lab and/or foot service environments! Installs easily with adhesive. Drilled options available, please inquire. PROTECTION LEVEL
PART # LENGTH CG-50-4 4 Ft. CG-50-8 8 Ft. CG-51-4 4 Ft. CG-51-8 8 Ft. CG-52-4 4 Ft. CG-52-8 8 Ft. CG-55-4 4 Ft. CG-55-8 8 Ft. CG-60-4 4 Ft. CG-60-8 8 Ft. CG-65-4 4 Ft. CG-65-8 8 Ft.
WING DIMENSION ANGLE "A"
VINYL COVER THICKNESS RADIUS DIMENSION DIMENSION "B" "C"
90˚ Heavy
135˚
1/4”
2" 1" 3-1/2"
MATERIAL: Polycarbonate
UL 94 V-2 FLAMMABILITY The CG-16 is un-drilled and comes with brad nails. All other profiles are drilled with countersunk holes and include #6 x 1" oval head sheet metal screws.
1/8" 16 GA. (059")
3-1/2"
1/8"
3-1/2"
3/4"
4 = 4 Ft.
Medium
8 = 8 Ft.
WING DIMENSION ANGLE "A" 3/4" 1-1/8" 2" 90˚ 2-1/2" 3" 135˚ 2-1/2" 45˚ 2-1/2"
CLASS A FIRE RATED Molded PVC end caps and outside corners are available. These versatile shapes can be used as a chair rail, bumper rail, or just to provide a color accent. Suggested to mount to every other stud, approximately 32".
COVER OVERALL FACE WIDTH THICKNESS PROJECTION PROTECTION DIMENSION DIMENSION DIMENSION PART # LENGTH LEVEL "A" "B" "C" EB-251-1/8" .100" 1-1/16" EBR-30- 12 Ft. Medium 2" .085" 1-1/8" WG-222" .100" 1-3/4"
Field Mitre Inside Corner
A-54
Outside Corner
(C)
RADIUS DIMENSION "C" 1/16" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8"
135˚ (C)
(B)
EB-25Vinyl cover 1-1/8” • high impact • 0.100 thick • high gloss finish
Aluminum Retainer - continuous • mill finish • 0.062” thick 1-1/8”
2”
Vinyl cover • high impact • 0.085 thick • high gloss finish Fasteners - sold separately
EBR-30-
Aluminum Retainer - continuous • mill finish • 0.062” thick
USE WITH EB-25EBR-30WG-22-
267 for Screws & 266 Toggler® Anchors
(B)
Fasteners -sold separately
1-1/16”
Vinyl cover • high impact • 0.100 thick • high gloss finish Aluminum Retainer - continuous 2” • mill finish • 0.063” thick
see page
Aluminum Retainer
10.6 oz.
(A)
COVER THICKNESS DIMENSION "B" .050" .075" .085" .100" .110' .100" .100"
OUTSIDE CORNERS PART # EB-27EB-32OC-22-
part # ADH1
90˚
Need a fastener & anchoring solution?
Vinyl Cover End Cap
USE WITH EB-25 EBR-30 WG-22
Need adhesive?
(C)
MATERIAL: High Impact Vinyl Cover with Aluminum Retainer
PART # EB-26EB-31EC-22-
(A)
45˚
PROTECTION LENGTH LEVEL
3/4"
(A)
(B)
WALL GUARDS: ACCENT RAILS
END CAPS
(B)
3-1/2"
CLEAR POLYCARBONATE CORNER GUARDS
PART # CG-16-132CG-17-132CG-24-132CG-18-132CG-25-132CG-19-132CG-22-132-
(C)
Fasteners - sold separately 1-3/4”
WG-22-
IMPACT PROTECTION SYSTEMS
2-15/16" to 6" WIDE WALL GUARDS
FOR COLORS SEE PAGE 52.
MATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. Lengths
CLASS A FIRE RATED Accessories: Molded PVC end caps and outside corners are available. Select profiles offer an accent strip, continuous cushioned bumper and inside corner. Refer to chart below for more details. Aluminum Retainer - continuous • mill finish • 0.062” thick
1”
Field Mitre Inside Corner Vinyl Cover
Vinyl Cover • high impact, textured • 0.100” thick 2-15/16”
Butt Joint
Fasteners -sold separately • mount 32” on center
OTC-3 Outside Corner
ETC-3 End Cap
Aluminum Retainer
1” Aluminum Retainer - continuous • mill finish • 0.080” thick
4”
Aluminum Retainer
3/4”
ECR-4 End Cap
Field Mitre Inside Corner
Fasteners -sold separately • mount 32” on center
B-100 Impact Cushion
Vinyl Cover
Vinyl Cover • high impact, textured • 0.080” thick
Butt Joint
Impact Cushion • continuous - included
ECL-4 End Cap
OC-4 Outside Corner
3/4” 1-1/16”
Vinyl Cover • high impact, textured • 0.080” thick
1-3/8”
Fasteners -sold separately • mount 16” on center - staggered
5”
ITC-5 Inside Corner
ETC-5 End Cap
Aluminum Retainer
B-100 Impact Cushion
Impact Cushion • continuous - included Aluminum Retainer - continuous • mill finish ETC-5 End Cap • 0.072” thick
3/4”
Butt Joint
OTC-5 Outside Corner
Vinyl Cover
Accent Strip - please inquire
1-1/16”
1” Aluminum Retainer - continuous • mill finish • 0.080” thick 6”
Field Mitre Inside Corner Vinyl Cover
WGB-8 Impact Cushion
Fasteners -sold separately • mount 16” on center - staggered Butt Joint
Impact Cushion • continuous - included 1”
Need a fastener & anchoring solution? see page
267 for Screws & 266 Toggler® Anchors
Vinyl Cover • high impact, textured • 0.100” thick
ETC-6 End Cap
WALL GUARDS
STYLE PART # SIZE A WG-3- 2-15/16" B C D
WG-4WG-5WG-6-
4" 5" 6"
ETC-6 End Cap
PROTECTION LEVEL Medium Medium to Heavy
OTC-6 Outside Corner Aluminum Retainer
END CAPS
PART # ETC-3ECL-4(left)
ECR-4(right)
ETC-5ETC-6-
OUTSIDE CORNERS
INSIDE CORNERS
OTC-4-
-
OTC-5OTC-6-
ITC-5-
PART # OTC-3-
PART # -
A-55
IMPACT PROTECTION SYSTEMS
7-3/4" to 8" WIDE WALL GUARDS
FOR COLORS SEE PAGE 52.
MATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. Lengths
Need a fastener & an anchoring solution?
CLASS A FIRE RATED Accessories: Molded PVC end caps and outside corners are available. Select profiles offer an accent strip, continuous cushioned bumper and inside corner. Refer to chart below for more details.
see page
267 for Screws & 266 Toggler® Anchors
Vinyl Cover • high impact, textured • 0.080” thick
1-3/8”
Aluminum Retainer
ETC-7 End Cap
ITC-7 Inside Corner
1-3/4”
B100 Impact Cushion
Fasteners -sold separately • mount 16” on center - staggered 8”
Impact Cushion • continuous - included Aluminum Retainer - continuous • mill finish • 0.072” thick
ETC-6 End Cap
OTC-7 Outside Corner
Butt Joint
Accent Strip - please inquire Vinyl Cover
1-3/8” 1”
Aluminum Retainer - continuous • mill finish • 0.080” thick
ETC-8 End Cap
Field Mitre Inside Corner Vinyl Cover
Impact Cushion • continuous - included
WGB-8 Impact Cushion
7-3/4” Fasteners -sold separately • mount 16” on center - staggered
Butt Joint
Vinyl Cover • high impact, textured • 0.100” thick
OTC-8 Outside Corner Aluminum Retainer
ETC-8 End Cap
1”
STYLE PART # E WG-7F WG-8-
SIZE 8" 7-3/4"
WALL GUARDS
END CAPS
PROTECTION LEVEL Medium to Heavy
PART # ETC-7ETC-8-
OUTSIDE CORNERS PART # OTC-7OTC-8-
INSIDE CORNERS PART # ITC-7-
WALL GUARDS
MATERIAL: Clear Lexan/Polycarbonate • 8 Ft. Lengths CLASS A FIRE RATED
5/16”
3” (CR-3) 4” (CR-4)
PART # HEIGHT CR-3-132 3" CR-4-132 4"
A-56
PROTECTION LEVEL Medium to Heavy
Extruded Lexan®/Polycarbonate • clear • 0.100” thick Hardware • #6 x 1” pan head, nickel plated, hi-lo screw, and vinyl expansion anchor, supplied with CR-3/CR-4 rail
96”
CR-3 or CR-4 Lexan ® chair rail
Pre-drilled hole for #6 fasteners • approximately 3” from each end, then approximately 18” o.c.
IMPACT PROTECTION SYSTEMS VINYL TEXTURED HAND RAILS
FOR COLORS SEE PAGE 52.
MATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. Lengths CLASS A FIRE RATED Suggested to mount to every stud.
1-1/2”
Aluminum Retainer - continuous • mill finish • 0.100” thick
BR-1200
1-1/2” Dia.
PART #
DESCRIPTION 1-1/2" Diameter Rail
BR-1200-
3-9/16”
Vinyl Cover • high impact, textured • 0.080” thick Mounting Bracket • molded vinyl • 32” on center
Fasteners • sold separately
BRR-1225 Return
ACCESSORIES
IOC-1250 Inside/Outside Corner Butt Joint
3”
Aluminum Retainer
Vinyl Cover
BR-1206 Bracket BRL-1225 Return
IOC-1250 Inside/Outside Corner
PART # BR-1206BRL-1225BRR-1225IOC-1250SPL-1200
BR-800
DESCRIPTION Molded Color Bracket (no hardware) Left Return (w/hardware) Right Return (w/hardware) Inside/Outside Corner (w/hardware) Hand Rail Splice (w/hardware)
1-1/2”
PART # BR-800-
1-1/2” Dia. Vinyl Cover • high impact, textured • 0.100” thick
DESCRIPTION Designer Hand Rail
Fasteners • sold separately Aluminum Retainer - continuous • mill finish • 0.082” thick Mounting Bracket • molded vinyl • 32” on center
BRR-825 Return IBR-875 Outside Corner BRR-825 Return
Vinyl Cover 3-3/4”
BR-107 Return
Butt Joint
PART # BR-107BRL-825BRR-825OBR-850IBR-875SPL-800
ACCESSORIES DESCRIPTION Bracket (no hardware) Left Return (w/hardware) Right Return (w/hardware) Outside Corner (w/hardware) Inside Corner (w/hardware) Hand Rail Splice (w/hardware)
OBR-850 Outside Corner Aluminum Retainer
A-57
IMPACT PROTECTION SYSTEMS VINYL TEXTURED HAND RAILS
FOR COLORS SEE PAGE 52.
MATERIAL: Textured Vinyl with Aluminum Retainer • 12 Ft. Lengths CLASS A FIRE RATED Suggested to mount to every stud.
1-1/2”
BR-500
1-1/2” Dia. Vinyl Cover • high impact, textured • 0.080” thick
PART # BR-500-
Fasteners • sold separately
DESCRIPTION Vinyl Covered Aluminum Hand Rail Mounting Bracket • molded vinyl • 32” on center
BR-527 Return
PART # BR-107BRL-527BRR-527IOC-557SPL-500
BR-107 Bracket
IOC-557 Inside/Outside Corner
Aluminum Retainer
Butt Joint
Aluminum Retainer - continuous • mill finish • 0.080” thick
ACCESSORIES DESCRIPTION Bracket (no hardware) Left Return (w/hardware) Right Return (w/hardware) Inside/Outside Corner (w/hardware) Hand Rail Splice (w/hardware)
BR-527 Return 2-15/16”
IOC-557 Inside/Outside Corner
Vinyl Cover
1-1/2”
BR-600V PART #
1-1/2”
DESCRIPTION
Vinyl handrail • high impact, textured • 0.080” thick Vinyl bumper guard • high impact, textured • 0.080” thick
Crescent Hand Rail BR-600V(Comes in 2 pieces)
Fasteners -sold separately
Mounting Bracket • molded vinyl • 32” on center Vinyl Cover BR-675 Inside Corner BR-108 Bracket
2-15/16”
Aluminum Retainer
Impact Cushion
BRL-625 Return
3/4”
Vinyl Cover 3-3/16”
A-58
BRR-625 Return
Butt Joint
OBR-650 Outside Corner
Accent Strip - please inquire
PART # BR-108BRL-625BRR-625OBR-650IBR-675SPL-600
Impact Cushion - continuous • included w/handrail Aluminum Retainer - continuous • mill finish • 0.072” thick
ACCESSORIES DESCRIPTION Bracket (no hardware) Left Return (w/hardware) Right Return (w/hardware) Outside Corner (w/hardware) Inside Corner (w/hardware) Hand Rail Splice (w/hardware)
FIXTURE & WALL BUMPER Features & Benefits:
• Profile matches Cartguard 1 for seamless transition from rigid to flexible products • Made from a minimum of 91% pre consumer polycarbonate waste • Contributes towards satisfying MR CREDIT 4-1 and MR CREDIT 4-2 under Leed. • Exceeds Impact performance of High Impact PVC by 29% and ABS by 63%. • 100% recyclable. Laser etched recycling symbol and resin ID code. • 100% Chlorine free (PVC free, vinyl free) • Does not emit hazardous dioxins if incinerated during waste disposal
IGID
Material: Polycarbonate
Base
1”
top
accessories
End Cap 1.13”
0.88”
corner
1.12”
0.316”
1.50”
1.50” 144”
0.848”
2”
0.88” 1.13”
90°
0.88” End Cap
1.125”
corner
2.00”
1.12”
2”
0.28”
1.50”
1.84”
1.5”
144”
2.00”
90°
1.13”
2”
PART # DESCRIPTION GGT-10-* 1” Top GGB-10-BK-* 1” Base PART # GGE-10-* GGC-10-*
PART # GGT-20-* GGB-20-BK-*
LENGTH 12’ 12’
DESCRIPTION 1” End Cap 1” Corner
DESCRIPTION 2” Top 2” Base
PART # GGE-20-* GGC-20-*
LENGTH 12’ 12’
DESCRIPTION 2” End Cap 2” Corner
*Stock Colors: 401 Black
111 Silver
101 Gray
105 Steel
501 Red
701 Blue
609 Putty
PMS Black Hussmann 701,Kysor 85
PMS 877C
PMS 430C Hussmann 054
PMS 425C
PMS 1797C Hussmann 715, Kysor 161
PMS 293C
PMS 452C Hussmann 078, Kysor 121
604 Light Caramel
601 Beige
PMS 465C
PMS 4685C
*Standard Colors: Available to ship within 3-4 weeks 713 Deep Blue
732 Sapphire
562 Mango
602 Brown
801 White
PMS 296C
PMS 294C
PMS 165C
PMS 1545C
PMS White Hussmann 700, Kysor71
533 Raspberry
739 Majestic Purple
PMS 216C
PMS 2695C
310 Mellow Yellow PMS 1235C Hussmann 719
201 Green PMS 348C
A-59
FIXTURE & WALL BUMPER Features & Benefits:
lexible
• Made from flexible PVC • Works seamlessy with Greenguard1 for smooth transitions • Designed to wrap around curved fixtures and cases • Can complete a radius as small as 4”
Material: Top = PVC End Caps, Corner, Base = Polycarbonate
Base
1”
top
corner
End Cap 1.13” 0.316”
0.875”
End Cap
PART # GGE-10-* GGC-10-*
corner
2.00”
1.12”
2”
1.84”
NOTE: Min order for flexible is 12 ft. and must be ordered in 12 ft. increments
90°
1.13”
DESCRIPTION 1” End Cap 1” Corner
PART # DESCRIPTION LENGTH CGT-20-FLX-* 2” Top 72’ GGB-20-BK-* 2” Base 12’
2.00”
1.50”
1.125”
1.5”
NOTE: Min order for flexible is 12 ft. and must be ordered in 12 ft. increments 90°
0.88”
0.848”
0.28”
0.88” 1.13”
1.50”
1.50”
1.125”
2”
PART # DESCRIPTION LENGTH CGT-10-FLX-* 1” Top 72’ GGB-10-BK-* 1” Base 12’
accessories
PART # GGE-20-* GGC-20-*
DESCRIPTION 2” End Cap 2” Corner
*Stock Colors: 401 Black
111 Silver
101 Gray
105 Steel
501 Red
701 Blue
609 Putty
PMS Black Hussmann 701,Kysor 85
PMS 877C
PMS 430C Hussmann 054
PMS 425C
PMS 1797C Hussmann 715, Kysor 161
PMS 293C
PMS 452C Hussmann 078, Kysor 121
*Standard Colors: Available to ship within 3-4 weeks
A-60
713 Deep Blue
732 Sapphire
562 Mango
602 Brown
801 White
PMS 296C
PMS 294C
PMS 165C
PMS 1545C
PMS White Hussmann 700, Kysor71
533 Raspberry
739 Majestic Purple
PMS 216C
PMS 2695C
310 Mellow Yellow PMS 1235C Hussmann 719
201 Green PMS 348C
604 Light Caramel
601 Beige
PMS 465C
PMS 4685C
FIXTURE & WALL BUMPER Features & Benefits:
• Damage protection for fixtures, merchandisers, walls and vestibules. • Decorative ribbing helps hide scuff marks
IGID
Material: PVC Base
top
0.39” 2.85”
End Cap
accessories 2.08
0.90
corner
3.00 0.90
3.00
1.25 90° PART #
CGT-35-* CGB-35-BK*
• Vertical corner protection • Textured finish helps hide scuff marks
3” Top 3” Base
PART #
Material: PVC
3” End Cap 3” Corner
Base
IGID
12’ 12’
DESCRIPTION
CGE-35-* CGC-35-*
*FOR COLORS, SEE COLOR SWATCHES ON PAGE 60.
Features & Benefits:
DESCRIPTION LENGTH
top
accessories 1.75”
1.75”
Top Cap
0.675”
1.75”
96”
96”
PART #
1.75”
DESCRIPTION
LENGTH
CGT-V175-* 1-3/4”Vertical Trim CGB-V175-BK* 1-3/4”Vertical Base PART #
8’ 8’
DESCRIPTION
CGE-V175-*
1-3/4”Vertical Top Cap
*Stock Colors: 401 Black
*Standard Colors:
111 Silver
PMS Black Hussmann 701,Kysor 85
PMS 877C
101 Gray PMS 430C Hussmann 054
Available to ship within 3-4 weeks 562 Mango PMS 165C
801 White
PMS White Hussmann 700, Kysor71
533 Raspberry
739 Majestic Purple
PMS 216C
PMS 2695C
310 Mellow Yellow PMS 1235C Hussmann 719
201 Green PMS 348C
A-61
BUMPER GUARD
K106-544-BR K106-544-BK
K106-555-BK 12 Ft. Long
250 Ft. Coil Polyethylene Black & Brown
INDUSTRIAL BUMPER MOULDING SJ-5510
1/2” 1/64”
1/2”
2122-BK
1968-BK
9/16”
7/8”
BLACK PVC 100 FT. COILS
BLACK and WHITE PVC 50 FT. COILS
BLACK PVC 100 FT. COILS
FLEXIBLE FLAT BUMPER W/ADHESIVE MAKES AN EXCELLENT WALL GUARD/CART GUARD
278-BK-8 278-BK-25
4”
BLACK - PVC 8 FT. LENGTHS & 25 FT. COILS
DOOR KNOB PROTECTOR PLATES • Protects and prevents walls for damage caused by door knob or lever handle locks. • Cover plate for damaged walls. • Eliminates replacing or repairing drywall, plaster or other wall coverings. • Self stick adhesive foam back cushions door lock impact. • Neutral white finish can be painted to match surface If desired.
Back has self-adhesive cushioned ring. Includes hole templates for fastening into wood or metal surface.
USE ON CORNER OR USE AS A FLAT WALL BUMPER
BEND TO CREATE EVEN OR UNEVEN LEG ANGLES
Damage caused by door knob....
PART # SIZE DP300 3” Dia. DP500 5” Dia.
...is easily repaired with the Ultra Door Knob Protector Plate.
MISCELLANEOUS EXTRUSIONS CHAIR EDGE GUARD MOULDING
VINYL / CLEAR • 100 & 600 FOOT COILS
403-023-000-0600R .400
.150 .055 .925
A-62
TABLE BEAD MOULDING VINYL
101-CL
CLEAR
101-B/B BRITE BRASS 101-B/C BRITE CHROME .240 .250
.217
.411
9/16”
STAPLE TO SURFACE 100 & 500 FT. COILS
9/16”
STAPLE TO SURFACE 100 & 500 FT. COILS
Go “Green”
without having to spend a lot of
Builder’s Mouldings
“Green”
Common MDF profiles produced in RPS. Recycled Poly Styrene mouldings are high-impact & 100% recycled. These economical and decorative mouldings are available in 8 ft. and 12 ft. lengths. Free samples available. Achieves LEED Certification. 100% RPS-0207 2” x 2” Face: 2-7/8” RPS-0105 3/4” x 3/4”
RPS-1120 3” x 3” Face: 4-1/8” RPS-0074 1-3/8” x 1-1/8” Face: 1-3/4”
RPS-2210 2-1/2” x 2-1/2” Face: 3-1/2”
RPS-0127-07 3/4” x 7/16”
RPS-0052 3/8” x 3/4”
RPS-0189 2-1/2” x 2-1/2” Face: 3-1/2”
RPS-0045 3-3/4” x 3-3/4” Face: 5-1/8”
RPS-0494 1-1/8” x 1-1/2”
RPS-0120 1/2” x 1”
RPS-0093 3/4” x 3/4”
RPS-0167 3/8” x 7/8”
RPS-0049 3” x 2” Face: 3-1/2”
RPS-0492 2-5/8” x 1”
RPS-0490 1-1/4” x 1-9/16”
RPS-0491-07 1-3/4” x 1”
RPS-2205 1-1/2” x 1-1/2”
RPS-0282 1-3/8” x 7/16”
RPS-0361 2-3/8” x 11/16”
RPS-0283 1-3/4” x 1-1/8” RPS-0234 1-1/8” x 7/16”
RPS-0390 2-5/8” x 5/8”
RPS-0327 2-1/4” x 11/16”
RPS-4400 1-5/8” x 5/8”
RPS-0376 2-1/4” x 5/8”
RPS-4410 1-9/16” x 11/16”
EXTERIOR-180 1-1/4” x 2”
RPS-3305 1-1/4” x 7/16” Design Repeat: 1”
RPS-0298 3-1/2” x 1” RPS-0284 2-1/4” x 1-1/8”
RPS-0183 3-1/8” x 3-1/8” Face: 4-5/8” RPS-0493 1-1/4” x 1-1/2”
RPS-0205 2” x 1-7/16”
RPS-0164 1-1/8” x 5/8”
RPS-0201 5/8” x 5/8”
RPS-2225 3-1/8” x 3-1/8” Face: 4-1/2”
RPS-0935 1/2” x 1-5/8”
EXTERIOR-188 11/16” x 1-5/8”
RPS-0075 1” x 1-1/8” Face: 1-5/8”
RPS-4405 1-5/8” x 5/8”
RPS-3307 1-3/8” x 7/8” Design Repeat: 2-1/4”
See pages 686-703 for our complete line of Builder’s Mouldings
RPS-0431 3-1/8” x 1/2” RPS-4475 5-5/8” x 1/2”
RPS-518-07 5-1/4” x 3/8”
RPS-0299 3-5/8” x 1-1/8” RPS-3319 1-7/8” x 11/16” Design Repeat: 1-3/4”
UNI-BASE-07 4” x 5/8”
A-63