2012
HARDWARE COMPONENTS www.panelplus.co
E
Adhesive
• Double Sided Foam Tape pg. 278 • Hot Melt Glue & Adhesive pg. 276 • Sta’-Put - pg. 277
Binning Strip pg. 249
pgs. 228-278 Caps
Hardware Components For Furniture & Cabinets E-228
Bumpons
• Hole Cover Caps - pg. 265 • Peel & Stick - pg. 264 • Pop On - pg. 265
pgs. 256-258
Dowel Pins • Plastic - pg. 262 • Wood - pg. 263
Draw Components • Back Bearings - pg. 248 • Back Stops - pg. 248 • Counter Locks - pg. 254 • Divider - pg. 248 • Drawer Locks - pg. 245 • Hanging File Extrusion pg. 245 • Table Lock - pg. 254
Dust Seal pg. 272
Miscellaneous Hardware • Adjustment Knobs pg. 275 • Case Feet - pg. 259 • Corner Braces - pgs. 270, 273 • Glue Blocks - pg. 273 • Hanging Hardware: Z-Bar Suspension Rails pg. 271 • Latches (Push Knob) pg. 268 • Magnetic Latches & Catches, Bullet Catches & Spring Turn Catch - pg. 269 • Mending Plates - pg. 270 • Mirror Clips - pg. 273 • Plastic Fasteners pg. 274 • Screws - pg. 267 • Titus® KD Hardware pgs. 250-251 • Wall Anchors - pg. 266 • Wedges/Door Stops - pg. 273
Non-Skid Pads pg. 258
Panel Retainer Clips • Clips - pg. 260 • Extrusions - pg. 261
Power Strips (Angled)
Shelf Rests
pg. 234
pgs. 252-253
Shutter Pins pg. 262
Swivels (Lazy Susan) • Metal - pg. 255 • Plastic - pg. 105
Trays • CPU Holder - pg. 247 • File Tray - pg. 246 • Keyboard Tray - pg. 247 • Pencil Tray - pg. 246
Wire Management
TV Mounts • Fixed Mount - pgs. 236-237 • Motorized TV Lift - pg. 235 • Pivot TV Mount - pg. 237 • Tilt TV Mount - pg. 236
• Electric Power Grommets • 120V Horizontal - pg. 232 • 120V Vertical Wet / Dry Kitchen - pg. 233 • 120V With USB Port pg. 230 • USB Port & Iphone Charger pg. 231 • Extrusions - pg. 243 • Grommets - pgs. 238-242 • Beauty Salon Grommets Steel - pg. 239 • Cup Holder (Plastic) pg. 240 • Desk Grommets (Plastic) pgs. 241-242 • Metal Grommets pg. 238 • Oval & Rectangular (Plastic) pg. 242 • Paper Management pg. 242 • Trash Lining Grommets (Stainless Steel & Plastic) pg. 239 • Wine Grommets (Plastic) pg. 241
Vent pg. 244
E-229
POWER STATION 2.95”
3.5”
10.14”
3.00”
8’
PRODUCT FEATURES:
• Black ABS construction. • Equipped with 8 ft. of 14 AWG cable and a grounded plug. • Works with material thickness of 3/4” to 3”. • Unit locks in it’s upper most position.
3.5” diameter. Pull up for easy access.
USB PART # OUTLETS DATA PDS-96P 3 PDS-96US 2 2
POWER DISTRIBUTION CENTER (120V)
PRODUCT FEATURES:
• Black ABS construction. • Compact • Inexpensive and easy to install. • Adaptable installation. • Only vertical or horizontal data strip on the market today!
PRODUCT FEATURES:
• Equipped with 8 ft. of SJT 4 AWG3C heavy duty power cord. • Attached spring clips for easy installation. • 2 self powered USB ports, and 1 pass through USB port for data transmission. • Bore Hole: 3-3-16” x 1-7/16” for installation. • Overall size: 3-1/2” x 1-3/4”. PART # PDC-96
E-230
PRODUCT FEATURES:
• Equipped with 8 ft. of AWG 14 cable and a grounded plug. • Recess mount and secure with 2 screws. (Not Included) • 3 AC outlets. • 2 USB ports for charging. • Bore hole: 7-3/8” x 1-3/4”. • Overall size: 8-1/4” x 2-1/4”. PART # PDC-224
POWER HUB (120V) PRODUCT FEATURES: • Black ABS construction. • 3 USB ports. • 2 card readers. • Microphone port. • Headphone port.
2.6”
PART # PDH-96
3.0” 3.5”
No more reaching under your desk! Simply download music and pictures in a snap. Keep work surface clear, because all wires can be put away when task is complete.
3-1/2” diameter. Touch latch to open. Lid keeps dirt and debris from getting inside.
POWER - I - DOCK
3-1/2” diameter. Touch latch to open. Lid keeps dirt and debris from getting inside.
2.6” 3.0” 3.5”
PRODUCT FEATURES:
All in one dock station that allows you to charge, view, listen, and synchronize your iPod / iPhone!
Note: Dock adapter maybe required for use with this unit. Refer to your devices owner manual.
• Black ABS construction. • iPod / iPhone audio / video output for amplifier / tv. • Charges iPod / iPhone. • Synchronizes with PC / MAC. • Apple certified “Made for iPod” and “Works with iPhone” universal dock. • Each unit includes: 8’ long x 120V power adapter. • 8’ long USB cable. • 8’ long audio / video cable. PART # PDI-96
“ Made for iPod” and “Made for iPhone”mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
E-231
POWER CENTER GROMMETS Horizontal Power Docks •
120V
• All units constructed of anodized aluminum frames and black polycarbonate and ABS interfaces. • Equipped with 10 ft. of AWG 14 Cable and a grounded plug. • Resettable circuit breaker switch rated at 15A. • LED power master switch turns unit on and off.
Recess Power Docks
Clamp On Power Docks
FEATURE:
• Units are easily mounted using a rectangular cut out in the desk surface. • Secures in position with two sturdy ratchet clips. • Can be locked in the open position at 45° or 60° to allow easy access. • Can be closed to recessed position leaving only the cables visible from the desk surface. • Works with maximum material 2-3/8” and a minimum of 5/8”.
FEATURE:
• Clamps onto work surface, no cut out needed. • Portable. • Works with maximum material 2” and a minimum of 3/8”.
Closed/ Recessed Position
Recess Power Docks
PART # PDG-H-22D PDG-H-32D PDG-H-52D
OVERALL CUT OUT CUT OUT LENGTH LENGTH WIDTH OUTLETS 8.86” 9.8” 5.2” 2 10.83” 11.77” 5.2” 3 14.76” 15.70” 5.2” 5
PART # PDG-CL-22D PDG-CL-32D PDG-CL-52D
Clamp On Power Docks LENGTH 8.86” 10.83” 14.76”
WIDTH 2.56” 2.56” 2.56”
OUTLETS 2 3 5
DATA * PORTS 2 2 2
DATA* PORTS 2 2 2
* DATA PORTS ARE OPEN RECEPTACLES ONLY. MUST BE FIELD WIRED! OTHER COLOR OPTIONS AND DATA PORT CONFIGURATIONS AVAILABLE - PLEASE INQUIRE.
E-232
POWER CENTER GROMMETS Vertical Mount Power Docks •
120V
Retractable and concealed power outlet system.
• All units constructed of anodized aluminum with black or gray polycarbonate and ABS interfaces. • Equipped with 10 ft. of AWG 14 Cable and a grounded plug. • Resettable circuit breaker switch rated at 15A. • LED power master switch turns unit on and off. • Slim 4” diameter Fits into an (80 mm) 3.2” hole. • Installs easily using a locking ring held firmly in place from the underside of the unit. • Works with a maximum material thickness of 1-3/4”, minimum of 5/16”. • Unit locks in its upper most position. • Standard with a splash proof, water resistant seal when in the recessed position.
SHOWN: PDG-V-3W
PDG-V-32D
Pull-Out Handles Waterproof Seal Master Switch
Pull-Out Handles
PDG-V-3W
Waterproof Seal Master Switch
Power Receptacles Power Receptacles Stop/Release Button
Data/Voice Ports * Stop/Release Button
Threaded Mounting Collar
Threaded Mounting Collar
Rubber Washer & Locking Ring
Rubber Washer & Locking Ring Holes for Optional Locking Screw Stop Anchor
Vertical Mount Power Docks
PART # PDG-V-32D PDG-V-3W
OVERALL RECESSED EXTENDED LENGTH CLEARANCE HEIGHT OUTLETS 14” 14” 9” 3 12” 12” 7” 3
Holes for Optional Locking Screw Stop Anchor
DATA* PORTS 2 -
COLOR Anodized/Gray Anodized/Black
* DATA PORTS ARE OPEN RECEPTACLES ONLY. MUST BE FIELD WIRED! OTHER COLOR OPTIONS AND DATA PORT CONFIGURATIONS AVAILABLE - PLEASE INQUIRE.
E-233
POWER STRIPS ANGLED POWER STRIPS (120V)
By Eliminating cutouts Show off your backsplash or showcase without the interruption of obtrusive outlets and extension cords! IDEAL FOR KITCHENS, BATHROOMS, DISPLAYS AND SHOWCASES.
STANDARD OUTLET 1-1/2”
APS Series Finish
TAMPER RESISTANT OUTLET
1-9/16”
1/2”
Anchors & Screws Provided
TR Series
Meets 2008 National Electric Code
Brushed Nickel (BN)
Brown (BR)
Snow White (SW) (Textured) White
Black
TR-36-
When purchasing 12” or 18” APS series you must specify left or right wire entry.
APS-30-
L = Left Wire Entry
APS-24-
Dark Roast (DR) (Textured)
Brushed Nickel (BN)
FINISH BN BK, BR WH BN BK, BR WH BN BK, BR WH BN BK, BR WH BN BK, BR WH
Gray
WIRE ENTRY
TR-18-
TR-12-
APS-12-
PART # APS-12-* (L OR R) APS-12-* (L OR R) APS-12-* (L OR R) APS-18-* (L OR R) APS-18-* (L OR R) APS-18-* (L OR R) APS-24-* APS-24-* APS-24-* APS-30-* APS-30-* APS-30-* APS-36-* APS-36-* APS-36-*
Black
Knockouts are located on either side, so that wiring can be done in the field.
TR-24-
APS-18-
APS SERIES
White
TR-30-
R = Right Wire Entry All other sizes have a knockout on either side, so that wiring can be done in the field.
1”
Anchors & Screws Provided
(15 AMP)
Gray
APS-36-
2 1/2”
Receptacle Colors
Finish
(15 AMP)
Black (BK)
WIRE ENTRY
2 1/8”
1-5/8” Receptacle
Receptacle Colors
White (WH)
2 1/4”
# OF RECEPTACLE LENGTH OUTLETS Gray 12” 2 Black 12” 2 White 12” 2 Gray 18” 3 Black 18” 3 White 18” 3 Gray 24” 4 Black 24” 4 White 24” 4 Gray 30” 4 Black 30” 4 White 30” 4 Gray 36” 4 Black 36” 4 White 36” 4
TR SERIES PART # TR-12-* TR-12-* TR-12-* TR-18-* TR-18-* TR-18-* TR-24-* TR-24-* TR-24-* TR-30-* TR-30-* TR-30-* TR-36-* TR-36-* TR-36-*
FINISH BN DR SW BN DR SW BN DR SW BN DR SW BN DR SW
# OF RECEPTACLE LENGTH OUTLETS Gray 12” 2 Black 12” 2 White 12” 2 Gray 18” 4 Black 18” 4 White 18” 4 Gray 24” 4 Black 24” 4 White 24” 4 Gray 30” 4 Black 30” 4 White 30” 4 Gray 36” 4 Black 36” 4 White 36” 4
Other lengths, and finish/receptacle combinations are available. Please inquire.
E-234
It is recommended that all electrical products be installed by a licensed electrician.
FLAT SCREEN TV LIFT Available in Silver or Black • 120V PRODUCT FEATURES:
• The unique patented Rack & Pinion gears will provide great stability as the mechanism is engaged and moving in a linear motion. • Simple and fast moving. • Includes RF remote control, manual/push switch, VESA compatible mounting bracket & larger models include lid lifter. • Ships in one carton. • Assembly required - simply install in cabinet and plug & play. • Not just for TV’s...suitable for many other applications. PART #
DEPTH BEHIND *REVERSE WEIGHT MINIMUM MAXIMUM TV FUNCTION CAPACITY COLOR HEIGHT HEIGHT TRAVEL
WT-4056 Silver
25.5”
x43.5”
18”
2”
YES
110 lbs.
WT-700
23.5”
51”
27.5”
2-13/16”
YES
220 lbs.
WT-4050 Black
34”
63.5”
29.5”
2-3/4”
YES
220 lbs.
WT-1000 Black
29.5”
69”
YES
225 lbs.
Black
39.375” 2-13/16”
* NOTE: Reverse function allows lifts to be used in both ascending & descending applications.
WT-700 & WT-1000 have a safety stop feature that will engage in both applications.
E-235
PRO LINE UNIVERSAL MOUNTS FOR FLAT PANEL TV’S Black Powder Coated Steel IDEAL FOR COMMERCIAL, EDUCATIONAL, AND HOME THEATRE APPLICATIONS
Product Features:
• All models available in fixed or tilt style. • All mounts come with peerless fastener packs, complete with all necessary screen attachment hardware. • Can be mounted to wood studs, concrete, cinder block or metal studs. (Metal stud accessory required, not included). Fixed Style
A Tilt Style Shown: PT660
Fixed Style
FIXED STYLE PART #
PROJECTION
TV SIZE
WEIGHT CAPACITY
VESA/MOUNTING PLATE
PF630
.68”
10” - 24”
80 lbs.
* VESA 75 and 100 mm
PF632
.71”
22” - 40”
115 lbs.
* VESA 75, 100, 200 x 100,
B
PF640
1.18”
23” - 46”
150 lbs.
17.25”W x 12.94”H
C
PF650
1.68”
32” - 56”
175 lbs.
28.75”W x 17.05’H
PF660
1.68”
37” - 60”
200 lbs.
28.75”W x 17.05”H
STYLE
A
TILT STYLE
or 200 x 200 mm
PROJECTION
TV SIZE
WEIGHT CAPACITY
VESA/MOUNTING PLATE
PT630
2.2”
10” - 24”
80 lbs.
* VESA 75 and 100 mm
PT632
2.25”
22” - 40”
115 lbs.
* VESA 75, 100, 200 x 100,
B
PT640
2.54”
23” - 46”
150 lbs.
17.50”W x 12.94”H
C
PT650
2.56”
32” - 56”
175 lbs.
29.06”W x 17.67’H
PT660
2.5”
37” - 60”
200 lbs.
29.06”W x 17.67”H
A
* VESA is a registered trademark (video electronics, standards association)
E-236
Fixed Style
or 200 x 200 mm
To assure proper fit, please consult Peerless’ “Mount Finder” @ peerlessmounts.com or ask our salesperson for assistance.
NOTE: We are a full line
Tilt Style
ALL TILT STYLE MODELS PIVOT 15˚ FORWARD OR -5˚ BACKWARD.
PART #
STYLE
B
distributor
C Tilt Style
LCD WALL MOUNTS POWDER COATED SILVER/STEEL • POWDERED COATED SILVER/CAST ALUMINUM
A
B
LCD FIXED MOUNT
LCD SINGLE PIVOT MOUNT
TVL-FM
TV-SFM
C LCD DOUBLE PIVOT MOUNT
D LCD TRIPLE PIVOT MOUNT
TV-DPM
TV-TWM
PART #
TV SIZE
WEIGHT
A
TVL-FM
12-42”
70 lbs.
B
TV-SFM
C
TV-DPM
D
TV-TWM
25 lbs. 12-27”
27 lbs. 25 lbs.
FINISH Powder Coated Silver/Steel Powder Coated Silver/Cast Aluminum
PROJECTION
PIVOT ˚
1/2” Off Wall
N/A
160˚ Horizontally 45˚ Vertically 180˚ Horizontally 1-1/2” to 9-1/2” 45˚ Vertically 180˚ Horizontally 1-1/2” to 14-1/2” 160˚ Vertically 2”
(Arm can extend 1”)
PLATE VESA SIZE 75 x 75 mm & 5-1/2” x 5’H 11 x 100 mm 75 x 75 mm & 100 x 100 mm
1-3/4” x 6-3/4”H
PLASMA /LCD FIXED MOUNT FOR FLAT PANEL TV’S POWDER COATED BLACK/HEAVY GAUGE STEEL This universal mounting system fits most large flat panel plasma and LCD TVs. Mounts flat to the wall. Made of steel. Locks in place! VESA* compliant. • Holds 30” - 63” TVs, up to 165 lbs. • Lockable. • Tilts 0-8 degrees. • Its low profile allows TV to be mounted only 1.25” off the wall. • Mounting plate is 32” wide. • All mounting hardware included.
*
Tilts 0 deg to 8 deg Lockable
PART# TVPL-FM
VESA is a registered trademark (video electronics, standards association) It is recommended to always mount into a wood or metal stud using appropriate anchors.
1.25 inch off the wall
E-237
PREMIUM METAL GROMMETS PRODUCT FEATURES:
• Material- Zinc alloy. • Bristle hair cable management. • Snap-in mechanism on cover. • Available in two finishes: Matte Chrome (MC) and Polished Chrome (PC). 2-5/8” (68mm)
M-60P Drill Hole Size
SHOWN IN MATTE CHROME
PART # M-60P-MC M-60P-PC
FINISH Matte Chrome Polished Chrome
2-3/8”
SIZE
2-3/8”
29/32” (23mm)
2-3/8” (60mm)
ECONOMY METAL GROMMETS PRODUCT FEATURES:
• Material- Zamak. • Removable flexi-cap cable management. • Snap-in mechanism on cover. • Two sizes available in two finishes: Brushed Nickel (BN) and Polished Chrome (PC).
POLISHED CHROME
2-5/8” (68mm)
M-80E Drill Hole Size
3-1/8”
Drill Hole Size
13/16” (21mm) 2-3/8” (60mm)
PART # M-60E-BN M-60E-PC
E-238
BRUSHED NICKEL
M-60E
2-3/8”
Removable Flexi-Cap
3-1/2” (90mm)
FINISH Brushed Nickel Polished Chrome
SIZE
2-3/8”
Removable Flexi-Cap
PART # M-80E-BN M-80E-PC
13/16” (21mm) 3-1/8” (80mm)
FINISH Brushed Nickel Polished Chrome
SIZE
3-1/8”
STAINLESS STEEL TRASH LINERS Material- 304 Stainless Steel
3/4”
PRODUCT FEATURES:
• Brushed finish. • Perfect for use in restaurants, doctor’s offices, hospitals, boats, RV’s and public restrooms. • Overlapping trim edge gives professional finished look. PART # MTL-61 MTL-62 MTL-66 MTL-101 MTL-102
DIAMETER 6” 6” 6” 10” 10”
1”, 2” or 6” 6” or 10”
HEIGHT 1” 2” 6” 1” 2”
Material Thickness: .020” Drill Hole Size
Other Sizes Available- Please Inquire
6” &2” 10”
TRASH RECEPTACLE GROMMET 38 SERIES
Drill Hole Size
2” 6”
PART # 38BK 38WH
PRODUCT FEATURES: • Material: Polystrene. • Overall Dia. 6-3/4”.
DRILL HOLE DIAMETER COLOR 6” Black 6” White
BEAUTY SALON STEEL HARDWARE PRODUCT FEATURES:
• Chrome plated. • Super strong & manufactured from 16 6A steel. • Multiple styles available for maximum storage ability.
BLOW DRYER HOLDER RING
3-3/8”
• Holds nozzle up to 3” in diameter
3”
PART # BSH-BD3
CURLING IRON RING
1-3/4”
4”
• Holds iron up to 1-1/2” in diameter
1-1/2”
PART # BSH-CU15
CURLING IRON RING
2-1/4”
4”
• Holds iron up to 2” in diameter
3”
FLAT IRON HOLDER
• Holds standard size irons (2-1/4” to 2-1/2”) 3-1/2”
4”
3” 2-1/4”
2”
PART # BSH-CU2
PART # BSH-FL
2-3/4”
E-239
ROUND WIRE MANAGEMENT GROMMETS 36 SERIES: INSERT CUP HOLDER 36BKS
PART DRILL HOLE
PRODUCT FEATURES: # DIAMETER • Material: ABS. 36BKS 2-13/16” • Color: Black. 36BKD 2-13/16” 36BKD • 1/4” lip area. • Friction fit molded ribs. Drill Hole Size • Other colors may be available. Minimums apply - please inquire. 2” 2-13/16”
26 SERIES: TELEPHONE WIRE GROMMETS ½”
Deep
PRODUCT FEATURES: • Material: ABS. • 1-1/8” overall diameter. • Accepts cards up to 13/16” wide.
PART # 26BK 26WH
Drill Hole Size
DRILL HOLE DIAMETER COLOR 1” Black 1” White
2” 1”
FLEXI SERIES PRODUCT FEATURES: • Material: ABS. • *Color: Black (BK), Silver Gray (SG), White (WH), Brown (BR), Gray (GR), Almond (AL), and Beige (BE). • Easy maneuvering of wires.
Drill Hole Size
2.38” 2” & 3.20”
(60mm)
PART # SIZE G31-* 60mm G32-* 80mm
OUTLET ACCESSORY GROMMET
PRODUCT FEATURES: • 4-7/16” x 6-7/16” overall • 11/16” Deep • 3-13/16” x 5-13/16” hole size PART # G1032-BK G1032-WH
E-240
COLOR Black White
(80mm)
GROMMET HOLE CUTTERS • Electronically fused steel to carbide tip makes a tough, strong tool you can be proud to own! • Carbide tipped deep throat hole saws are designed to safely extend the usual range of your portable drill, drill press and lathe. For fast, easy production cutting of abrasive construction materials such as fiberglass, plywood, plasterboard, transite, flakeboard, fiberboard & wood. You can expect this saw to outlast 5 regular saws. Arbor uses a 1/4” pilot drill.
SAFE - DURABLE SHATTER RESISTANT 1-3/4” DEEP CUTTING
CUTS PART # INSERTS FOR: FHC-2 (2”) #31-2” Round FHC-275 (2-3/4”) #35-3” Round FHC-4125 (4-1/8”) #37 Wine Ring ARBOR: PART # FHA-335
ROUND WIRE MANAGEMENT GROMMETS 31 SERIES
PRODUCT FEATURES: • Material: ABS. • Each set contains a grommet, grommet cap & a slot cover; slot cover stores under cap & out of sight when system is in use. Drill Hole Size
35 SERIES
1” Deep
2”
2” 2”
PRODUCT FEATURES: • Material: ABS. • Includes retractable/self-storing slot cover. • When closed, cover offers a flat profile with neat, uniform surface & shape; open position provides large enough opening with easy access for cover retrieval or removal of entire cap system from grommet. * Fits 2-3/4” hole;
1-1/16” Deep
Drill Hole Size
DRILL PART # HOLE DIA. COLOR
31DG
2”
35DG
2-3/4”
31BR 31BK 31PT 31WH
2” 2” 2” 2”
35BR 35BK 35PT 35WH
2-3/4” 2-3/4” 2-3/4” 2-3/4”
ECONO SERIES
2” 2-3/4”
2-5/16”
Dove Gray Brown Black Putty White
Drill Hole Size
2” 2-5/16”
PRODUCT FEATURES: • Material: ABS. • Easy access to wires. Simply push down on door with finger and slide to the left or right. • Black (BK) or Silver (SL) top. • One piece construction, no lost tabs or cap.
Drill Hole Size
PRODUCT FEATURES: • Material: ABS. • Color: Black. • Textured Cap.
2” & 2” 2-3/4”
PART #
T31-BK T35-BK
2-13/16”
2.75”
3” is dia. dimension. DRILL PART # HOLE DIA. COLOR
Dove Gray Brown Black Putty White
SPRING LOADED GROMMET
DRILL HOLE DIAMETER
2” 2-3/4”
PART #
SPG60-BK SPG60-SL
DRILL HOLE DIA.
2-5/16” 2-5/16”
37 SERIES: WINE RING GROMMETS PRODUCT FEATURES: • Material: High Impact Styrene. • Color: White or black. • Overall Dia. 4-1/2”.
Drill Hole Size
2” 4-1/8”
DRILL HOLE PART # DIAMETER COLOR 37WH 4-1/8” White 37BK 4-1/8” Black
ORGANIZER GROMMET Black Only
PART #
BK8865
ROUND WIRE GRIPPING GROMMETS PRODUCT FEATURES: • Material: High Impact Styrene. • 1-1/4”. • Fits into 1-1/8” dia. hole.
PART # COLOR 27BR Brown 27BK Black 27WH White
E-241
OVAL WIRE MANAGEMENT GROMMETS 39 SERIES
PART # COLOR 39BK Black 39WH White 39GR Gray
PRODUCT FEATURES: • Material: Polystyrene. • 3-1/2” x 2” overall. • Ultimate solution to the problem of oversized chords. • Can handle multiple chords.
OV32 SERIES
SUPER SIZED GROMMET
PRODUCT FEATURES: • Material: ABS • Color: Black • Can close wire doors when not in use.
PRODUCT FEATURES: • Material: ABS. • Color: Black. • 2 parts with removable cap and elongated tab.
4.65” x 2.38” R1.170
A
O.D.
4.590
Overall Dimensions: 75mm (3.00”) x 166mm (6.64”). Depth: 17.5mm (.70”). Routing Dimensions: 65.5mm (2.62”) x 156.5mm (6.26”).
E 2.340
2.760
D B C
1-3/4” x 3-1/4”
F G
5.010
I.D.
PART #
A B C D E F G 127mm 112mm 118mm 25mm 70mm 54mm 60mm OV32-BK (5.0) (4.40”) (4.65”) (0.98”) (2.77”) (2.13”) (2.38”)
2.6” x 6.26”
PART # SSG4214-BK
RECTANGULAR WIRE MANAGEMENT GROMMETS 32 SERIES
• Deep bushings designed for wood furniture with wider insert legs for desks or table tops 1-1/4” thick; shallow version for metal furniture applications includes a “variable gauge” bushing that snaps into the cutout and is secured by 4 pins. • Streamlined in appearance and accommodates a 1-7/8” x 3-1/4” cutout with 5/16” radius corners. • Perfect for most business machine leads, coaxial computer cables and telephone cords.
1-7/8” x 3-1/4” with 5/16” radius corners
PART # COLOR DESCRIPTION 32BK-4 Black Shallow Bushing w/#4 Cap - Textured Cap 32BKD-2 Black Deep Bushing w/#2 Cap - Textured Cap 32BKD-4 Black Deep Bushing w/#4 Cap - Smooth Cap
CAP #4 (OVAL)
33 SERIES: PAPER MANAGEMENT GROMMETS PRODUCT FEATURES: • Material: ABS. • Stocked with 2 insert leg depths for either a 3/4” to 1-13/16” or a 1” to 1-1/16” panel. 1-1/16” deep leg designed with radii edges to prevent paper jams. • Grommet snaps into slot & is held firmly in place by 2 registry pins. • Offers functional way to finish printer cutout & accommodates computer paper up to 17” wide. 17.156” PART # COLOR x 1.67” 33BK Black
E-242
CAP #2 (CIRCULAR)
MULTI-WIRE GROMMETS PRODUCT FEATURES: • Black* • 4 Removable tabs for a variety of wire management options. Overall Dimensions: 52mm (2.08”) x 104mm (4.16”). Depth: 15.5mm (.62”). Routing Dimensions: 45mm (1.80”) x 98mm (3.92”). *Other colors available. Please inquire. Minimums apply. PART # MWG5214-BK
WIRE MANAGEMENT SYSTEMS
8 FT. LENGTHS - Black PVC
1”
0.780 1.140
Adhesive Tape
PART # 2243-BK
WIRE & CABLE ORGANIZATION CHANNEL - 8 FT.LENGTHS Black Virgin Vinyl
Channel’s are supplied with self adhesive tape. This product is used to store and organize wire, computer cable, phone/fax lines, electrical cords and other wiring devices on such items as entertainment centers, computer work stations, desks & home theater systems
OPEN CHANNEL Part #
A
B
C
CWM15-BK 2.340” 1.090” .753”
LOCK CLOSE CHANNEL
1.25” 0.900
0.260 1.580
Adhesive Tape
PART # 5200-BK
1” CLIPS
Full
N EW
RACEWAY ON-A-ROLL
0.795-0.805”
1/4” SIZE INSIDE DIMENSIONS .255” x .125”
PART # 5230-BK
WIRE MANAGEMENT FOR 2-3/8”(60mm) ROUND TABLE LEGS
A 2.34 1.51
B 1.09 0.77
C 0.753 0.242
• Folds into a rigid PVC channel for wire or cable installations • Easy for storage for up to 50 ft. and 100 ft. of raceway • Low cost-High quality • Perfect for around windows and doors • Adhesive backing for fast-easy installion • UL94VO Rated - flame retardant PVC PART # DESCRIPTION FWF-25511 1/4” White FWF-25521 1/4” Beige FWF-14511 3/8” White 50 FT. FWF-14521 3/8” Beige COIL FWF-05511 1/2” White FWF-05521 1/2” Beige FWF-10511 1” White FWF-10521 1” Beige PART # DESCRIPTION FWF-14111 3/8” White 100 FT. FWF-14121 3/8” Beige COIL FWF-05111 1/2” White FWF-05121 1/2” Beige
3/8” SIZE INSIDE DIMENSIONS .375” x .375”
5 Ft. Lengths w/Adhesive Black
1/32” Double sided tape. Full length of channel.
!
Part # Description CWM15-BK32 Black Open 1” Clip w/adhesive CWM10-BK32 Black Lock Close 1” Clip w/adhesive
3/4”
0.190-0.200”
120’
Part # A B C Box Qty CWM30-BK .770” .410” .143” 800’ CWM50-BK 1.010” .550” .194” 672’ CWM10-BK 1.510” .770” .242” 320’
PART # 2440-BK 0.180
1/32” x 1/2” Double Sided tape. Full length of channel.
Full Box Qty
PART # CWM-1575-BK
HIDEACORD® SELF ADHESIVE ELECTRICAL WIRE COVER SYSTEM 1300-WH, 1300-BK 102cm WIRE COVER
SELF ADHESIVE BACKING
• • • • • • •
8 FT. LENGTHS. RIGID ABS PLASTIC. AVAILABLE IN WHITE & BLACK (Can Be Painted To Match Wall Colors). INSTALLS IN MINUTES. CAN BE USED ON WALLS, BASEBOARDS, CEILINGS, ETC. NO TOOLS REQUIRED. SIMPLE AND EASY TO USE. PART# 1300-WH 1300-BK
DESCRIPTION 102cm Wire Cover-White w/Adhesive 102cm Wire Cover-Black w/Adhesive
WE USE ONLY HIGH QUALITY, GENERAL USE ADHESIVE TAPES. EACH CUSTOMER ASSUMES RESPONSIBILITY OF TESTING THE PRODUCT FOR THEIR SPECIFIC APPLICATION. WE WILL SUPPLY SAMPLES FOR THIS PURPOSE. SPECIAL NEEDS CAN BE ACCOMMODATED ON A PER RUN BASIS.
E-243
PLASTIC VENT GRILLS Available in White or Black • Designed to provide air circulation where needed • Other colors available, please inquire
G-1970-BK G-1970-WH
G-1972-BK G-1972-WH
G-1971-BK G-1971-WH PART #
G-1970G-1971G-1972G-1975-
OVERALL SIZE
2-5/8” x 8-7/8” 3-9/16” x 9-11/16” 3-9/16” x 9-11/16” 2-7/8” x 8-3/4”
HOLE SIZE
2-3/8” x 8-5/8” 2-5/8” x 8-31/32” 2-5/8” x 8-31/32” 2-7/16” x 8-3/8”
G-1975-BK G-1975-WH
MOUNTING TYPE
Glue On Screw Mount Glue On Glue On
CABLE CLAMPS NATURAL NYLON
REACH & ROHS COMPLIANT
USE #10 PANHEAD FOR ALL
These nylon cable clamps are perfect for applications in electronics, automotive, air craft, appliance and many other industries. The Standard Series has a 3/8" wide contact area and is designed for medium to lightweight applications.
HEAVY DUTY PART #
CC-0187 CC-0250 CC-0312 CC-0375 CC-0500
STANDARD D
3/16" 1/4" 5/16" 3/8" 1/2"
W
3/8" 3/8" 3/8" 3/8" 3/8"
PART #
H
.203 .203 .203 .203 .203
HDCC-018 HDCC-025 HDCC-031 HDCC-037 HDCC-050 HDCC-062 HDCC-075 HDCC-100
E
.430 .410 .495 .595 .605
Larger Sizes Available up to 1-1/2"
D
3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"
W
1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
H
.203 .203 .203 .203 .203 .203 .203 .203
E
.425 .410 .500 .530 .595 .655 .780 .910
QUICK RELEASE CABLE CLAMPS NATURAL NYLON WITH ADHESIVE
REACH & ROHS These adhesive backed nylon wire & cable clips are used to route wire & cables. The parts COMPLIANT are backed with polyurethane foam tape & feature a releasable clip so wires can be removed after assembly if desired. AWC-0375 AWC-0125
PART #
*Also available in Black.
AWC-0125 *AWC-0375
SIZE
1/8" 3/8"
NYLON CABLE TIES PART #
NCT-400 NCT-400BK NCT-550 NCT-550BK NCT-800 NCT-800BK NCT-1500 NCT-1500BK
E-244
COLOR
Natural Black Natural Black Natural Black Natural Black
LENGTH
4" 4" 5-1/2" 5-1/2" 8" 8" 15" 15"
BUNDLE DIA. MIN – MAX
1/16" – 7/8" 1/16" – 7/8" 1/16" – 1-1/4" 1/16" – 1-1/4" 1/16" – 2-1/8" 1/16" – 2-1/8" 1/16" – 4" 1/16" – 4"
TENSILE STRENGTH
18 lbs. 18 lbs. 40 lbs. 40 lbs. 40 lbs. 40 lbs. 50 lbs. 50 lbs.
PLASTIC HANGING FILE FOLDER MOULDINGS STYRENE • BLACK, WHITE, BEIGE • 1/2” • 8 FOOT LENGTHS
115-2078-BK
115-2182-BK
115-BK-8 115-WH-8 115-BE-8
RIGID PVC/BLACK • 8 FOOT LENGTHS 1/2”
1/2”
115-2180-BK
5/8”
115-2132-BK
1/2”
2132-CLIP works with 115-2132-BK
See page 9 for details CUT PROGRAMS 1. STANDARD CUT - Rough cut to allow for small parcel shipping. 2. CUT TO SIZE - Achieves a higher tolerance.
FILE BAR HOLDERS
DRAWER LOCKS
BLACK ACETATE
CHROME OR BRASS PLATED
Fits Up To 1/2” Thick Drawer Sides • Holds 1/8” x 1/2” File Bar
For 7/8” Thick Drawers Use #6 Panhead Screws • Metal Construction. • Keyed Alike Only.
R83-6120-BK
R83-6100-BK
R83-6130-BK
PART #
DESCRIPTION DIMENSIONS Hanging file R83-6100-BK 1-1/8" H x 15/16" W bar holder mount file 1-5/8" H x 1/2" W R83-6120-BK Screw bar holder 90° File R83-6130-BK 7/16" H x 15/16" W bar holder
PART # RA711-BRS-KA RA711-CHR-KA SCREW PART # SCR-6625PHZ #6 x 5/8” Pan Head Zinc
POLISHED CHROME
For Sliding Cabinet Doors
RECTANGULAR BAR
Use #6 Panhead Screws
Mill Finish • 12 FT LENGTHS A 1/2"
#KY-101
PULL LOCK
PENDA FLEX BAR PART # ALU599-18-M
Spare Keys
For RA711-CHR-KA only
B 1/8"
A
PART # PL-10
B • 7/8" Depth. • Key alike only. • With screws and Cup strike.
SCREW PART # SCR-6625PHZ #6 x 5/8” Pan Head Zinc
E-245
PULL OUT PENCIL DRAWER
UNDER THE DESK STORAGE SOLUTIONS
FEATURES
Black Contoured handle for easy access Centrally located finger tab for easy opening Designed to fit desks with shorter depth Narrow width Wide width Low profile for maximum leg clearance Pen/pencil compartments with plastic tray Ball bearing slides Roller slide with plastic tray Mounted hardware 24 cd storage rack Hanging file folder capability Made in the U.S.A.
3
4
4 4 4
1
2
4
1
4 4
4
4 4 4
4 4 4 4
4 4 4
4
4 4 4 4 4 4
4
4
(ACCESSORIES NOT INCLUDED)
4 4 4 4
1
3
2
(ACCESSORIES NOT INCLUDED)
2
PART # PDW-1BK
Dimensions: 16.125"L x 22.40"W x 2.05"D
PART # PDN-1BK
Dimensions: 17.60"L x 12.75"W x 1.83"D
4
(ACCESSORIES NOT INCLUDED)
(ACCESSORIES NOT INCLUDED)
3
PART # PD-8181
PART # PDW-2BK
4
Dimensions: 19.19"L x 21.39"W x 2.05"D
TRAY Dimensions: 21.52"L x 15.33"W x 2.38"D CD HOLDER: 5.52"L x 12.69"W x 6.24"D
UTILITY TRAYS STYRENE • BLACK
STYRENE • BEIGE OR BLACK
STYRENE • BEIGE OR BLACK STYRENE • BEIGE OR BLACK HANGERS FOR R11-90 TRAYS
R11-194
PART # COLOR R11-82BK Black
E-246
PART # COLOR R11-90BK Black
PART # COLOR R11-87BE Beige R11-87BK Black
R11-197
PART # COLOR R11-194BK Black R11-197BK Black
COMPUTER ACCESSORIES Keyboard Trays
FEATURES 1
Reversible mouse tray for right or left hand users Gel wrist rest Gel mouse pad Pen/pencil storage Contoured wrist support Fully articulates: swivels and retracts Slides on track Ball bearing slides Includes all mounting hardware Removable pencil draw Can accommodate microsoft ergonomic keyboard Made in the U.S.A.
2
2
3
4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
1
(KEYBOARD NOT INCLUDED)
1 4 4 4 4
3
PART # CT24-BK
COLOR Black
Dimensions: 18.23"L x 19.95"W x 3.90"D
4
(KEYBOARD NOT INCLUDED)
2
PART # CT36-BK
COLOR Black
Dimensions: 18.20"L x 26.26"W x 3.90"D
3
PART # CT48-BK
COLOR Black
Dimensions: 18.20"L x 26.38"W x 3.90"D
4
PART # CT-EKS-BK
COLOR Black
Dimensions: 12.40"L x 26.38"W x 8.53"D (lowest)
CPU HOLDER
Plate Mount With Swivel Extension
• Mounts under desk. • Forward extension and 90° swivel allows for ease in cpu access. • Adjustability & versatility can fit cpu’s from 40mm(13.60”) to 540mm(21.60”) high. Can fit cpu’s from 134mm(5.36”) to 234mm(9.36”) wide. PART # • Anti-skid protection on base. PLATE-CPU • Black finish, steel construction.
E-247
PLASTIC BACK BEARINGS • Easy to install • Color - White • Raylex - a slippery plastic with self lubricating qualities. • Back Bearings are non-binding drawer installations at a minimum cost.
R40-26LWH
PART # R40-26LWH BULK SCREW PART # CTN. QTY. SCR-6625PHZ 15,000 #6 x 5/8” Pan Head Zinc
DRAWER DIVIDER SUPPORTS
DRAWER DIVIDER CLIPS
GROOVE TYPE
• Holds up to 5/16" thick material • Black Acetate
• Supports are installed in grooves in drawer side. • Divider may be adjusted by removing it and relocating the supports.
r83-190be
Fits up to 1/2" thick drawer sides PART #
DESCRIPTION DIMENSIONS Hanging Drawer 2-3/8" H x 1/2" W Divider Clip Long Hanging 3-5/8" H x 1/2" W R83-6230-BK* Drawer Divider Clip R83-6200-BK*
1/4”-5/16” thick divider PART # COLOR R83-190BE Beige
Corner Braces can be found on page 273
POLYPROPYLENE PLASTIC DRAWER OUTSTOP REMOVAL OF DRAWER
PREVENTS DRAWER REMOVAL
TIPS FORWARD TO REMOVE
• Outstop mounts on back of drawer. • Embodies unique snap-acting hinge. • Prevents drawer from tipping out. • Easy removal of drawer with outstop. • Returns to vertical position upon reinsertion. • Use #6 oval head wood screw (not included).
PART # COLOR A B R51-423BE Beige 1-3/4" 3/4" R51-424BE Beige 2" 1" R51-468BE Beige 1-3/8" 3/8"
REINSERTION OF DRAWER
ON REINSERTION AUTOMATICALLY TIPS FORWARD SNAPS UPRIGHT
BULK SCREW PART # CTN. QTY. SCR-6500FHZ 20,000 #6 x 1/2” Flat Head Zinc
FLEXA-TOUCH® Material: Natural ABS (Screws included)
E-248
• One touch opening. • Mount through or on back of drawer. • No need for drawer pulls, simply push on drawer front to open drawer. • Adjustable screw to accommodate different drawer lengths. • In closed position adjusts from 1-15/16” to 2-1/2”. • In open position adjusts from 2-5/8” to 3-3/16”. • Works for small and large drawers. • Won’t interfere with or hinder drawer slide performance.
Open Closed
PART # OI-1021
BINNING STRIPS Our binning strip makes it easy to adjust spacing & accommodate your needs. Material: Ivory, White, Black & Clear Styrene
Versatile plastic band strip can be installed on counters, tables, cabinets, in drawers - anywhere. accepts various types of dividers. economical yet easily installed.
STANDARD BINNING STRIP FOR 1/4" DIVIDER
STANDARD BINNING STRIP FOR 1/8" DIVIDER
STANDARD BABY BINNING STRIP FOR 1/4" DIVIDER
Works independently of standard binning strip
1/4”
2”
1/8”
1/8”
PART # 282-CL-48 282-CL-60 282-IV-48 282-IV-60 282-WH-48 282-WH-60 282-BK-60 282A-CL-48 282A-CL-60 282A-IV-48 282A-IV-60 282A-WH-48 282A-BK-48 282A-WH-60 282A-BK-60
3/4” 1/8”
PART # 292-BK-60 292-CL-60 292-IV-60 292-WH-60 292A-BK-60 292A-CL-60 292A-IV-60 292A-WH-60
DESCRIPTION 60"-Black-No adhesive 60"-Clear-No adhesive 60"-Ivory-No adhesive 60"-White-No adhesive 60"-Black-w/adhesive 60"-Clear-w/adhesive 60"-Ivory-w/adhesive 60"-White-w/adhesive
DESCRIPTION 48"-Clear-No adhesive 60"-Clear-No adhesive 48"-Ivory-No adhesive 60"-Ivory-No adhesive 48"-White-No adhesive 60"-White-No adhesive 60"-Black-No adhesive 48"-Clear-w/adhesive 60"-Clear-w/adhesive 48"-Ivory-w/adhesive 60"-Ivory-w/adhesive 48"-White-w/adhesive 48"-Black-w/adhesive 60"-White-w/adhesive 60"-Black-w/adhesive
RATCHET/BINNING STRIP Ivory • 30" Lengths Linear Pe Plastic
3/8”
PART # 182-CL-60 182-IV-60 182-WH-60 182-BK-60 182A-CL-60 182A-IV-60 182A-WH-60 182A-BK-60
DESCRIPTION 60"-Clear-No adhesive 60"-Ivory-No adhesive 60"-White-No adhesive 60"-Black-No adhesive 60"-Clear-w/adhesive 60"-Ivory-w/adhesive 60"-White-w/adhesive 60"-Black-w/adhesive
Nickel Plated Universal End Splicer
Teither Recess For Routed Slot
To Fit Binning Strip Holds 1/4" Material
PART # 6510-30
PART # 2123-30
SPLICER FOR 1/4" GLASS SHELF ABC CLIP
1/8”
2”
2-3/4”
Flush Mount On Flat Shelf
2191-01
1/8”
3/8”
3/8”
1/8” 1”
1/4”
3/8”
2-3/4” 1/8”
1/4”
1/8”
Use at top or Bottom of glass; Brite zinc finish (Holds 1/4" material) PART # 2191-01
SHELF DIVIDER WHITE & BLACK/STYRENE - 12 FT. LENGTHS 26-WH (w/o adhesive) 26A-WH, 26A-BK (w/adhesive) PART # 26-* 26A-*
E-249
CAM & DOWEL CONNECTORS 5 TWINSTART DOWELS
QUICKFIT - TL2 DOWELS • 8mm x 24mm & 8mm x 34mm dowels. • “Klix” locking feature provides a strong, vibration proof joint. • 4mm in drilling tolerance makes assembly easier. • Ideal for panel-to-panel applications. • Expands for solid bind. • Suitable for 15mm cam.
• Twinstart dowels. • 6mm x 24mm & 7mm x 34mm dowels. • Suitable for use with all 12mm & 15mm cams. • Twinstart-thread results in reduced insertion times. • “Klix” locking feature provides a strong, vibration proof joint.
BON
US
PART #
SIZE
PART #
OP5-5441 8mm x 24mm OP5-5474 8mm x 34mm
SIZE
OP5-5544 6mm x 24mm OP5-5534 7mm x 34mm
15mm CAM
5mm DOUBLE-ENDED DOWELS • 5mm dowel. • Ideal for shared panel boards; 16mm (.64”) or 19mm (.76”) • “Klix” locking system provides a strong, vibration proof connection. • Zinc Plated. • Works with Expando-6 Housings.
• For 16mm (.64”) & 19mm (.76”) board thicknesses. • Linear cam profile results in smooth, easy cam rotation & dowel pull up. • “Klix” locking feature provides a strong, vibration proof joint.
PART #
PANEL PIECES SIZE FINISH PER CARTON
OP5-5644B 16mm Black OP5-5644Z 16mm Zinc OP5-5656Z 19mm Zinc
PART #
OP6-6414 OP6-6416
FASTENER FOR FACE & EDGE BORING • One turn lock system, thus reduces assembly time. • Pre-assembled for consumer convenience. • (1”) 25mm dia. housing x (1/2”) 12.5mm depth. • Color: White Plastic.
OPHS-3118
OPHS-3150
PART #
OPHS-3118 OP-3118BR OPHS-3150 OPHS-3180 OPHS-3168
E-250
OPHS-3168
DESCRIPTION
White Housing Brown Housing White Decorative Cap White Hilo Screw Dowel Euro Screw Dowel - Zinc
OPHS-3180
2000 2000 2000
QUICKFIT CLOSET ASSEMBLY EXPANDO 6 HOUSINGS & DOWELS 20mm EXPANDO-6 HOUSING NON-OUTRIGGER
• Available for 15mm/16mm & 18mm/19mm boards. • “Klix” locking system provides a strong, vibration proof connection. • Available in Almond, Black, White, Brown & Candlelight plastic. • Used in closet construction.
20mm EXPANDO-6 HOUSING OUTRIGGER
• Available for 15mm/16mm & 18mm/19mm boards. • “Klix” locking system provides a strong, vibration proof connection. • Available in Almond, Black, White & Brown plastic. • Used in closet construction.
BON FEAT US U Elim RE! in Pane ates l Shif t
SIDE ENTRY
DROP-IN
DROP-ON
PART #
TYPE
OP6-6435-* Non-Outrigger Side Entry OP6-6437-* Non-Outrigger Side Entry OP6-6431-* Non-Outrigger Drop On OP6-6433-* Non-Outrigger Drop On OP6-6443-* Outrigger Side Entry OP6-6445-* Outrigger Side Entry OP6-6439-* Outrigger Drop On OP6-6441-* Outrigger Drop On
SIDE ENTRY
BOARD SIZE
15mm/16mm 18mm/19mm 15mm/16mm 18mm/19mm 15mm/16mm 18mm/19mm 15mm/16mm 18mm/19mm
*COLOR
(CHOOSE CODE)
AL = Almond BK = Black WH = White BR = Brown CN = Candlelight
5mm EXPANDING DOWEL
5mm DOWELS • 5mm x 11mm dowel. • Klix locking system provides a strong, vibration proof connection. • Features an integral skirt which acts as a positive stop during insertion. • Zinc Plated.
• No dowel on the market like this one! • 5mm x 12mm dowel. • Features strong vibration proof connection. • No damage to side panels. • Easy to move & re-adjust. • Works with Expando 6 Housings.
PART #
PART #
OPHS-6406
OPHS-6408
DOUBLE LOCKING COUNTERSINKING SCREW • Great alternative to Confirmat screws stronger performance. • Works for both 16mm & 19mm panels. • 1 screw for 2 types of applications. • Finish: Zinc Plated
PART #
OPHS-0180
E-251
SHELF RESTS Fluted Pins
Material: Clear Lexan
Material: Clear Lexan
Material: Clear Lexan
Material: Clear Lexan
PART # COLOR R25-171CL Clear
PART # COLOR R25-470CL Clear
PART # COLOR R25-350CL Clear
PART # COLOR R25-471CL Clear
5mm Pins
Smooth Pin For Softwood Material: Clear (Clear Lexan) or White (H.D.P.E.)
Material: Clear Polycarbonate For 5mm Hole
Shelf support safety plastic clip w/steel pivot pin.
Because of design, glass shelf will not shimmy. • For up to 1/8” thick shelves • Perfect for medicine cabinets
Sure Grip No Slip! PART # COLOR R25-170CL Clear
PART # COLOR R25-500WH White R25-500BR Brown R25-500CL Clear
PART # R25-CK
PART # COLOR R25-809WH White
STEEL SHELF SUPPORTS 5mm • Available in Nickel Plated, Brass, or Bronze.
All Metal Shelf Rests • 5mm dia. x 16mm long (.20” x .64”). • Cost-effective. • Simple; no adjustments. • Available in Brass or Chrome finish.
5mm
PART # FINISH R25-300BR Brass R25-300NI Nickel 5mm Pin with Brown PVC Sleeve • Available in Brass or Nickel. PART # FINISH R25-305BR Brass R25-305NI Nickel
E-252
2.5mm
19mm
PART # FINISH R25-228-NI Nickel Plated R25-228-BRS Brass R25-228-BZ Bronze
PART # FINISH PSR-02CH Chrome PSR-02BR Brass 1/4” Pin with Brown PVC Sleeve • Available in Brass or Nickel.
7.5mm
11mm
1.460” .600”
1/4” • Available in Nickel Plated or Brass.
9.5mm
13mm 1/4 in. 9mm
.790” 1.460” .600”
.790”
PART # FINISH R25-128-NI Nickel Plated R25-128-BRS Brass Material: Zinc • Available in Brass or Zinc. PART # FINISH SH-700B Brass SH-700Z Zinc
3.6mm
SHELF RESTS Grommet Dimensions
With Grommets
Shelf Support Dimensions
• Brass or nickel plated finish.
.31
.46 PART # FINISH R25-450BRS-SS Brass R25-450NP-SS Nickel Plated
PART # FINISH R25-450BRS-GT* Brass R25-450NP-GT* Nickel Plate
LOCKING SHELF RESTS Material: Nylon
5mm Pin Size: 1/2", 5/8" or 3/4" • 5mm smooth hole dia.; 5/16" long peg. • Available in White only.
1/4" Pin Size: 1/2", 5/8" or 3/4" • 1/4" fluted hole dia.; 5/16" long peg. • Available in White only . PART # JPE-301-12-010-1 JPE-301-58-010-1 JPE-301-34-010-1
PART # SIZE R25-192-625WH 5/8" R25-192-750WH 3/4"
SIZE 1/2" 5/8" 3/4"
2 Piece Shelf Lock System
5mm Pin Size: 5/8” or 3/4” • 5mm smooth hole dia.; 3/8” long peg. • Available in White or Beige. PART # SIZE *R25-244-625 5/8" R25-244-750 3/4" *White only
• For 32mm modules 5mm pin. PART # SH-103113
LOCKING SHELF RESTS • Hold down feature, locks shelf in place for security. • 5mm pin for 12mm (.48”), 16mm (.64”), & 19mm (.76”) shelves. • Available in White, Brown, Black or Clear Plastic. .
PART # OPHS-1826OPHS-1828OPHS-1829-
SHELF SIZE 12mm (.48”) 16mm (.64”) 19mm (.76”)
PIECES PER CARTON 4000 4000 4000
GLASS SHELF SUPPORTS Material: Clear Nylon 1/4” Pin • Holds 3/16” glass.
PART # R25-605CL Chrome with Clear PVC Sleeve 5mm Pin • .660” long. • .265” dia. head.
PART # PSR-01CH
Material: Clear Nylon 1/4” Pin • Holds 1/4” glass.
PART # R25-606CL Nickel Plated Nonskid 5mm Pin
PART # SH-138
Material: Clear Nylon 5mm Pin • Holds 1/4” glass.
PART # R25-806CL Adjustable Nonskid, Locking For 3/16"-1/4" Glass • 3/16" hole dia.
PART # SH-450
E-253
TABLE ALIGNERS BROWN • MATERIAL-H.D.P.E. Use #8 Flathead Screws
16 GAUGE MATERIAL Use #10 Panhead Screws
PART # H-3
APPLICATION ON TABLE UNDERSIDE:
PART # CN-01
COLOR Brown
#10 Panhead Screws
#8 Flathead Screws BULK PART # FINISH SIZE CTN QTY. SCR-8625FHZ Zinc #8 x 5/8” 12,000
TABLE PINS
BULK PART # FINISH SIZE CTN QTY. SCR-1625PHZ Zinc #10 x 5/8” 10,000
DROP LEAF TABLE WEDGE
BEIGE • MATERIAL - H.D.P.E. • Lower costs - least expensive quality pins available. • Self-lubricating for easy, smooth action; will not swell, shrink, check or rust. • Rugged well-engineered design; no glue required. • Finishing materials will not adhere to the pin; will not mar fine table surfaces. • Table pins are also used for top & bottom glides for sliding doors.
PART # COLOR R25-81BE Beige
DARK BROWN • Uses: drop-leaf action, gate leg, extension base or pullout supports. • Use where sliding surfaces must be protected against friction & wear. • Will not crack or split. • Staple under table top.
PART # R50-108DB
COLOR Dk. Brown
FLIP BOLT CONNECTOR Nirvana... the tool-less counter top connector is here. The Flip Bolt is fast and easy, requires no tools and is great for most countertop connections. PART # We're not mechanics!
E-254
FC-FB
DESCRIPTION Flip Bolt Counter top Connector
SWIVELS
7” Flat or 3-D THIS IS OUR MOST POPULAR AND VARIED LINE OF SWIVELS. 7" SQUARE PLATES HAVE SLOTS ON 5-1/4" CENTERS. 12 GAUGE STEEL. PITCH AVAILABLE IN FLAT, 3°. NOTE: FLAT SWIVELS ARE FOR CHAIRS WITHOUT BACKS, 3-D SWIVELS ARE FOR CHAIRS WITH BACKS. Standard Swivel Used On Entire Trendler Pedestal Base Line. May Be Used In Conjunction With 3-1/4" Weld Plates. Four 1/4"-20 Threaded Holes On 2-1/2" Centers. Pieces Per Carton: 25 Weight Each: 2.50 Lbs.
Top & Bottom Plates, 5-1/4" Slotted Centers 7 Square Plate 12 Gauge Steel Pieces Per Carton: 16
REVOLVING TURNTABLES Steel Lazy Susan
• Only 5/16” Thick (Can be recessed into surfaces for 1/8” thickness). • Large, Full Ball Race For Maximum Stability & Smooth Gliding Rotation. • 360° Interlock Prevents Separation. • Electro Zinc Coated For Rust Resistance. • Orders for less than the carton quantity are subject to a broken box. • Made in the USA. CENTER WEIGHT APPROX. CARTON PART # SIZE HOLE DIA. CAPACITY TOP DIA. QUANTITY S8-300C 3” Sq. 100 1-1/4” 200 lbs. Up to 18” S8-400C 4” Sq. 2-5/32” 300 lbs. 12” - 25” 100 100 S8-600C 6” Sq. 4-11/16” 500 lbs. 15” - 30” S8-900C 9” Dia. 4-1/2” 700 lbs. 17” - 35” 25 S8-1200C 12” Dia. 6-9/32” 1000 lbs. 20” & Over 25
For Larger Applications
Aluminum Lazy Susan
SOLID ALUMINUM BALL BEARING SWIVELS CONTAIN LOCK SCREW FOR STATIONARY APPLICATION OR FOR SHIPPING PART # S8-1300C S8-1600C S8-1800C S8-2400C
SIZE 13” Dia. 16” Dia. 17-3/8” Dia. 24” Dia.
WEIGHT CAPACITY 220 lbs. 250 lbs. 330 lbs. 700 lbs.
WEIGHT *APPROX. PART # SIZE CAPACITY TOP DIA. S8-1700C 18” Dia. 330 lbs. 24”
*Nonskid feet on upper & lower rail. Drill holes on upper & lower rail.
E-255
3M™ BUMPON™ PROTECTIVE PRODUCTS EXCELLENT FOR GLASS TABLES, CABINET DOOR, LIDS & DRAWERS! Bumpons products are make of durable, resilient polyurethane polymer formulated especially for its unique high coefficient of friction, slip-resistant, non-marring features. An aggressive, high tack pressure sensitive adhesive protected with any easy release liner makes application fast & easy. Use to prevent slamming, nicking, scuffing, sliding, vibration or noise. Clear bumpons become virtually invisible, since the clarity of the polyurethane bumpers enables them to transmit any color they are placed on.
• NON-SKID • NON-MARRING • CRACK RESISTANT • SELF ADHESIVE BACKING
AUTHORIZED DISTRIBUTOR
CLEAR A
B, C & G
PART # A SJ-5302 B SJ-5303 C SJ-5306
D E
D SJ-5308 E SJ-5312 F SJ-5318
F
G SJ-5382
QUIET CLEAR SERIES A
B
PART # A SJ-6506 B SJ-6512
C
D
C SJ-6553 D SJ-6561
BRIGHT WHITE A
DIMENSIONS: ENGLISH METRIC +/-0.02 in. +-/0.5 mm WIDTH: 0.312 7.9 HEIGHT: 0.085 2.2 WIDTH: 0.44 11.1 HEIGHT: 0.20 5.0 WIDTH: 0.375 9.5 HEIGHT: 0.150 3.8 WIDTH: 0.50 12.7 HEIGHT: 0.12 3.1 WIDTH: 0.50 12.7 HEIGHT: 0.14 3.5 WIDTH: 0.50 12.7 HEIGHT: 0.23 5.8 WIDTH: 0.250 6.4 HEIGHT: 0.075 1.9
STYLE
COLOR
Bell Shaped
Clear
Hemisphere
Clear
Hemisphere
Clear
Tapered Square
Clear
Cylindrical
Clear
Tapered Square
Clear
Cylindrical
Clear
DIMENSIONS: ENGLISH METRIC +/-0.02 in. +-/0.5 mm STYLE COLOR DIAMETER: 0.375 9.5 Hemispherical Clear HEIGHT: 0.150 3.8 DIAMETER: 0.500 12.7 Cylindrical Clear HEIGHT: 0.140 3.5 WIDTH: 0.433 11.0 Hexagonal Clear HEIGHT: 0.120 3.05 Cone LENGTH: 0.433 11.0 Hexagonal Hemisphere Clear HEIGHT: 0.150 3.8
DIMENSIONS: ENGLISH METRIC PART # +/-0.02 in. +-/0.5 mm 0.507 12.7 WIDTH: A SJ-5412 HEIGHT: 0.14 3.6
STYLE
COLOR
Cylindrical
Bright White
* THE ITEMS LISTED AS WHITE ARE AN OFF WHITE COLOR. THE BRIGHT IS PURE WHITE IN COLOR.
E-256
3M™ BUMPON™ PROTECTIVE PRODUCTS EXCELLENT FOR GLASS TABLES, CABINET DOOR, LIDS & DRAWERS!
COLORS PART #
A
DIMENSIONS: ENGLISH +/-0.02 in.
A SJ-5001BK
B, G & J
SJ-5003WH B SJ-5003GY SJ-5003BK C SJ-5007BK D
C, D & L
E
E
F G H
F&K
I
H&I
J
SJ-5008WH SJ-5008GY SJ-5008BK SJ-5009WH SJ-5009GY SJ-5009BK SJ-5012WH SJ-5012GY SJ-5012BR SJ-5012BK SJ-5017WH SJ-5017BK SJ-5018WH SJ-5018GY SJ-5018BR SJ-5018BK SJ-5023WH SJ-5023GY SJ-5023BK SJ-5027WH SJ-5027GY SJ-5027BK
K SJ-5076BK
M N O
L SJ-5508BK SJ-5514WH M SJ-5514GY SJ-5514BK N SJ-5705BK O SJ-5744BK
HEAVY DUTY
PART #
WIDTH: HEIGHT:
0.50 0.14
WIDTH: HEIGHT:
PART #
STYLE
COLOR
12.7 3.5
Cylindrical
Black
0.44 0.20
11.1 5.0
Hemisphere
WIDTH: HEIGHT:
0.40 0.12
10.2 2.5
*White Grey Black
Tapered Square
WIDTH: HEIGHT:
0.50 0.12
12.7 3.1
Tapered Square
WIDTH: HEIGHT:
0.88 0.40
22.3 10.1
Circular Depressed
WIDTH: HEIGHT:
0.50 0.14
12.7 3.5
Cylindrical
WIDTH: HEIGHT:
0.75 0.38
19.0 9.6
Hemisphere
WIDTH: HEIGHT:
0.50 0.23
12.7 5.8
Tapered Square
WIDTH: HEIGHT:
0.81 0.30
20.5 7.6
Tapered Square
WIDTH: HEIGHT:
0.63 0.31
16.0 7.9
Hemisphere
WIDTH: HEIGHT: WIDTH: HEIGHT:
.315 0.11 0.50 0.12
8.0 2.8 12.7 3.1
WIDTH: HEIGHT:
0.81 0.52
20.6 13.1
WIDTH: HEIGHT: WIDTH: HEIGHT:
1.25 0.24 0.75 0.16
31.75 6.1 19.1 4.1
SJ-5532BR SJ-5532BK
CONTINUOUS BUMPER - 50 FT. COILS
METRIC +-/0.5 mm
DIMENSIONS: ENGLISH +/-0.02 in.
WIDTH: HEIGHT:
1.88 .66
DIMENSIONS: ENGLISH +/-0.02 in.
SJ-5510BK WIDTH: SJ-5510WH HEIGHT:
0.50 0.15
Black *White Grey Black *White Grey Black *White Grey Brown Black *White Black *White Grey Brown Black *White Grey Black *White Grey Black
Cylindrical Tapered Square
Black
Tapered Square
*White Grey Black
Tapered Square
Black
Cylindrical
Black
METRIC +-/0.5 mm
47.7 16.7
METRIC +-/0.5 mm
12.7 3.8
Black
STYLE
Circular Depressed
STYLE
COLOR
Strip
Black
COLOR
Brown Black
* THE ITEMS LISTED AS WHITE ARE AN OFF WHITE COLOR. THE BRIGHT IS PURE WHITE IN COLOR.
E-257
3M™ BUMPON™ PROTECTIVE PRODUCTS EXCELLENT FOR GLASS TABLES, CABINET DOOR, LIDS & DRAWERS!
TOP HAT A&B
DIMENSIONS: A B C
PART #
A SJ-6115 .625 B SJ-6125 .625
EASY SLIDE BUMPER
.093 .093
.187 .187
STYLE
Flat Top Hat Round Top Hat
COLOR
Black Black
• NONMARRING & NONSTAINING • CRACK RESISTANT • SELF ADHESIVE BACKING • LOAD BEARING - UP TO 40 LBS. PER BUMPER PART #
DIMENSIONS: ENGLISH +/-0.02 in.
WIDTH: SJ-6344BK HEIGHT:
.75 .16
METRIC +-/0.5 mm
4.1 19.1
STYLE
COLOR
Cylindrical
Black
POLYURETHANE ADHESIVE BUMPERS All bumpers stocked in clear. Please inquire for colors. Colors sold in full cases only.
1000 PIECE MINIMUM ORDER
PAB-001
PAB-012 PAB-112
PAB-002
N EW
PAB-006 PAB-106 PAB-018 PAB-023
PAB-008 PAB-044
EMBOSSED BLACK
Our Non-Skid Pads consist of specially formulated thermoplastic rubber material fused to crosslinked polyethylene foam with adhesive backing. • HIGH DURABILITY • NON-MARRING • ABRASIVE RESISTANCE • CHEMICAL & WATER RESISTANT Kitchen Appliances Office & Desk Accessories Computer Terminal Equipment Medical Devices
E-258
PAB-078
PAB-003
DIE-CUTTING AVAILABLE, PLEASE INQUIRE.
PAB-009
!
CASE PART # WIDTH HEIGHT QUANTITY PAB-001CL .500” .140” 5000 PAB-002CL .312” .085” 5400 PAB-003CL .440” .200” 5082 PAB-006CL .375” .150” 7200 PAB-008CL .500” .120” 5000 PAB-009CL .880” .400” 1440 PAB-012CL .500” .140” 5000 PAB-018CL .500” .230” 5000 PAB-023CL .810” .300” 2646 PAB-044CL .750” .160” 2450 PAB-078CL .400” .0130” 7200 SOFT SERIES -Softer bumper for extra sound deadening properties PAB-106CL .375” .150” 7200 PAB-112CL .500” .140” 5000
NON-SKID PADS 50 FT. ROLLS
PICTURE
PART #
DESCRIPTION
NS-1600-4 1/2” Wide x 1/8” Thick NS-1600-2 1/2” Wide x 1/16” Thick NS-3200-4 1” Wide x 1/8” Thick NS-3200-2 1” Wide x 1/16” Thick PART #
DESCRIPTION
NS-0016-4 1/2” Dia. x 1/8” Thick NS-0016-2 1/2” Dia. x 1/16” Thick NS-3232-4 1” x 1” x 1/8” Thick NS-3232-2 1” x 1” x 1/16” Thick NS-3264-4 1” x 2” x 1/8” Thick NS-3264-2 1” x 2” x 1/16” Thick NS-3296-4 1” x 3” x 1/8” Thick NS-3296-2 1” x 3” x 1/16” Thick
BLACK RIVET FEET NYLON/TPE Rivet Material: Nylon 6 Foot Material: TPE • Ideal for use with corrugated displays and small table top appliances and test equipment. • Use with thin gauge metal for toaster ovens, blenders, food processors, cabinets, etc. • Feet are supplied with incorporated push rivets to quickly and easily install into pre-drilled holes. • Can be removed by pushing the plunger PART # back thru from the opposite side. RF29-100BK RF29-110BK RF29-115BK RF29-120BK RF29-125BK RF29-130BK RF29-140BK RF29-150BK RF29-155BK RF29-160BK RF29-180BK RF29-195BK RF29-225BK
H
PANEL THICKNESS .031"-.071" .031"-.071" .071"-.110" .114"-.146" .150"-.189" max .02" .039"-.079" .031"-.047" .051"-.091" .031"-071" .039"-.079" .039"-.079" .059"-.087"
Panel Thickness
d D HOLE DIA. .122"-.126" .161"-.165" .161"-.165" .161"-.165" .161"-.165" .161"-.165" .161"-.165" .200"-.205" .200"-.205" .161"-.165" .161"-.165" .161"-.165" .142"-.146"
d .531" .79" .79" .79" .79" .551" .551" .551" .551" .79" .79" .551" .394"
D .559" .827" .827" .827" .827" .591" .591" .591" .591" .827" .827" .591" .425"
H .217" .165" .165" .165" .165" .236" .236" .236" .236" .236" .315" .354" .157"
LOW PROFILE GLIDE PVC/polystyrol/polysterene • Extremely low profile • Non-skid only 3/8" height • Non-marring • Safe for hardwoods & tile floors. • Works with 3/16" x 1" screw. not included. • Single screw application
screw not included
PART # DIAMETER LPG-24BK 24mm LPG-28BK 28mm
Also available in brown and white, minimum required - please inquire.
BLACK RUBBER-LIKE NON-SKID CASE FEET • POLYLASTOMER® • Use on: bread boxes, cutting boards, cook book holders, etc. • Also used as heavy duty bumpers for hinged & sliding doors. • Use wood or machine screws (See screw chart below). • Other sizes available - please inquire. • Approximately 1/4" high.
APPROX. BOTTOM PART # DIA. R29-0075 3/8" R29-0421 1/2" R29-0425 3/4" R29-0425BR 3/4" R29-0447 1"
A B .22" .39" .25" .50" .28" .75" .28" .75" .31" 1.00"
C .14" .10" .16" .16" .13"
D .13" .15" .17" .17" .18"
USES E SCREW .30" #4 PAN .28" A .38" B .38" B .60" B
PLASTIC SLIPPERY CASE FEET • Material: High Density Polyethylene • Ideal use: Floor glides on movable furniture. • Easily attached to wood, metal or plastic with wood screws (not included). • Multi-ribbed design gives exceptional strength for heavy loads. • Use wood or machine screws (See screw chart below).
SCREW CHART
BROWN & BLACK
B PART # A HOLE DIA. R29-140BK 7/8" 13/64" R29-140BR 7/8" 13/64" R29-141BK 7/8" 13/64" R29-141BR 7/8" 13/64" R29-142BK 1" 13/64" R29-142BR 1" 13/64" R29-144BK 1-1/8" 1/4" R29-144BR 1-1/8" 1/4" R29-145BK 7/8" 1/4" R29-275BK 7/8" 5/32" R29-275BR 7/8" 5/32"
C 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/4" 3/16" 3/16"
E USES D TAPER F SCREW COLOR 1/2" 10" 3/8" B Black 1/2" 10" 3/8" B Brown 5/8" 8" 3/8" B Black 5/8" 8" 3/8" B Brown 3/4" 8" 3/8" C Black 3/4" 8" 3/8" C Brown 1" 6" 1/2" D Black 1" 6" 1/2" D Brown 1/2" 10" 3/8" B Black 3/8" 8" 5/16" A Black 3/8" 8" 5/16" A Brown
SCREW PART # DESCRIPTION SCR-6625PHZ #6 x 5/8” Pan Head Zinc SCR-8625PHZ #8 x 5/8” Pan Head Zinc SCR-8100PHZ #8 x 1” Pan Head Zinc SCR-1750PHZ #10 x 3/4” Pan Head Zinc
A B C D
E-259
R21 SERIES -
GLASS / PANEL RETAINING BUTTONS FLUSH
R21-10
• Retainers are P.E. plastic. Clear retainers are Lexan plastic. R21-180
PART #
R21-10BE R21-10BK R21-10CL R21-180CL R21-182BE R21-183BE R21-184BE
R21-182
• Screws sold separately.
R21-183
R21-184
Brown only
COLOR USE SCREW
Beige Black Clear Clear Beige Beige Beige
PART #
A A A B A C C
“A”
R21-290 .125 R21-292 .250 R21 Series Screws A B C
SCREW PART #
SCR-5625FHZ SCR-6625PHZ SCR-6625FHZ
HEAD/FINISH
#5 x 5/8” Flat Head Zinc #6 x 5/8” Pan Head Zinc #6 x 5/8” Flat Head Zinc
USE SCREW
B B
BULK CTN. QTY.
(20M) (15M) (15M)
RECESSED
• To fasten: Twist button from side of frame and push back towards screw into locking position. • To release: Twist and lift button over frame. • Screws sold separately.
• Retainers are P.E. plastic. Clear retainers are Lexan plastic. • They are for semi-permanent installations. • Screws sold separately.
PART # COLOR DIM. “A” USE SCREW 5/16” C R21-281DB Dk. Brown R21-281CL Clear 5/16” C R21-313CL Clear 1/8” C
PART # COLOR USE SCREW R21-175BE Beige A
Grille
• Screw adjustable, secure holding & quick removal of metal grilles. • Reversible to accommodate varied glass thicknesses and door mortises. • 7/8” vinyl tipped screw tightens and adjusts without harming glass.
BRONZE FINISH ON STEEL Overall Size: 3/8” wide x 1-3/16” long screws included. PART # SH-302
NO-ROUTE GLASS / PANEL RETAINING CLIPS • Designed to attach glass or decorative panels to doors without routing. • Can be screwed or stapled into place. • Straight and corner pieces available. • Available for 1/8” or 3/16” thick panels.
E-260
PART # R21-1806BR R21-1806CL R21-1807BR R21-1807CL R21-1804BR R21-1804CL R21-1805BR R21-1805CL
COLOR Brown Clear Brown Clear Brown Clear Brown Clear
MTL THICKNESS 1/8” 1/8” 3/16” 3/16” 1/8” 1/8” 3/16” 3/16”
TYPE Straight Straight Straight Straight Corner Corner Corner Corner
ADJUSTABLE PANEL/GLASS RETAINER 1/16” - 1/8” - 1/4” Material- RPVC 12 Ft. Long
Outside Look
Insert May Be:
• Glass • Markerboard • Tackboard • Expanded Metal Grilles • Woven Wire Grilles • Decorative MDF Screening Panel
6500-*
(Sold In Sets)
Inside Look
Outside Retainer 1.025”
G L A S S
.720” .075” Insert
.820”
Front
Back View
Available Colors
Inside Retainer
View
Frosty White (FW) Light Beige (LB)
6500-*
.375”
Door Frame
PVC Retainer Strip
Platinum (PLT)
.400”
PANEL RETAINER STAPLE TYPE - Vinyl • Black, Brown, White - 500 Ft. Coils 102-625-
102-680-
102-627-
* Brown only
102-681-
102-645-
102-624-
102-620-
* Available in 100’ coils (Add -100 after part #)
102-698-
* Brown only
102-644-
102-778-
102-623-
* Available in 100’ coils
* Brown only
* Available in 100’ coils
(Add -100 after part #)
(Add -100 after part #)
GROOVE TYPE - Vinyl • Black, Brown, White - 500 Ft. Coils 102-648-
* Brown & Black
102-621-
13 32
.455 .520
.150 .170
Use S4 - S10 Slotter
* Available in 100’ coils (Add -100 after part #)
102-646-
.410 .165 .415 .165
Use S4 Or S10 Slotter
.150 .170
* Brown only .520 .590 .145 GROOVE .130 SIZE
Use S4 Or S10 Slotter
* Available in 100’ coils (Add -100 after part #)
(#102-648 is also available in Fruitwood; #102-621 is also available in Fruitwood & Clear)
E-261
NYLON LOCKING DOWEL PINS For Joints Stronger Than The Wood Or Wood Product Itself
R25-147
P remium S eries
Advanced Polymer Tech Moisture Resitant
ELIMINATES GLUING & CLAMPING
R25-604
• MATERIAL: NYLON & NATURAL • Available in 6mm & 8mm. • Reduces assembly time. • Insert manually or with most doweling machines. • Not affected by humidity - less likely to jam insertion equipment. • Joints using our dowel pins remain mechanically locked long after glue has lost its grip. • Forced fit - no glue necessary.
BEST BUY GREAT VALUE QUANITITY PRICING AVAILABLE. PLEASE INQUIRE
R25-860
• Black. • Moisture Resistant. • Strong PE material. • No glue necessary. • Self Locking.
Generous Sample Bags Available, Please Inquire
PART # SIZE R25-830 8MM x 30MM
MITER DOWEL
STANDARD SHUTTER PIN B
WHITE NYLON
E
D
A
Material: Nylon A = Pin Diameter B = Head Diameter C = Pin Length D = Shoulder Dia. E = Full Length
C
BORE HOLES BEFORE CUTTING MITER
PART # R25-173
DIAMETER x LENGTH 6mm x 1-1/8” 8mm x 1-1/2” 8mm x 1-1/2”
PART # R25-147 R25-604 R25-860
PART # SP-1
PLASTIC SHUTTER PINS Tension Control Pin
Retractable Pin
Cuts down on loose slats.
Great for replacements & repairs.
Material: PE
A Pin Diameter: 0.14” B Head Diameter: .24”
A
B
Spring Inside.
Pin pushes in, then snaps back. PART # SP-17
E-262
Material: Nylon
A Pin Diameter: 0.14” B Head Diameter: .24” C Full Length: 1.08” Spring Diameter: 0.255” • For 2-1/2” louver, use every 3rd slat. • For 3-1/2” louver, use every 2nd slat. • For 4-1/2” louver, use every slat. PART # SP-19
WOODEN DOWEL PINS
• White Birch
• *Available Fluted or Spiral
(*Please Specify Fluted or Spiral When Ordering)
• Kiln Dried To 6-8% Moisture
Which pin is better, Spiral or Fluted? ....There is no real answer as to which pin
offers better holding power. While some manufacturers dowel-inserting machinery may advise which groove suits its machinery better, both pins offer excellent dispersion of glue as well as excellent bonding qualities. Spiral Style Fluted Style
SIZE: 1/4” x 1” (*Fluted or Spiral) PART # R25-2510C* R25-2510M* R25-2510B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 1/4” x 1-1/2” (*Fluted or Spiral) PART # R25-2515C* R25-2515M* R25-2515B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 1/4” x 1-3/4” (*Fluted or Spiral) PART # R25-2517C* R25-2517M* R25-2517B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 1/4” x 2” (*Fluted or Spiral) PART # R25-2520C* R25-2520M* R25-2520B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 3/8” x 1” (*Fluted or Spiral) PART # R25-3710C* R25-3710M* R25-3710B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 3/8” x 1-1/4” (*Fluted or Spiral) PART # R25-3712C* R25-3712M* R25-3712B* QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 3/8” x 1-1/2” (*Fluted or Spiral) PART # R25-3715C* R25-3715M* R25-3715B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 3/8” x 1-3/4” (*Fluted or Spiral) PART # R25-3717C* R25-3717M* R25-3717B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 3/8” x 2” (*Fluted or Spiral) PART # R25-3720C* R25-3720M* R25-3720B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 3/8” x 2-1/2” (*Fluted or Spiral) PART # R25-3725C* R25-3725M* R25-3725B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 7/16” x 1-1/2” (*Fluted or Spiral) PART # R25-4315C* R25-4315M* R25-4315B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 7/16” x 1-3/4” (*Fluted or Spiral) PART # R25-4317C* R25-4317M* R25-4317B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs.
Glue
Glue
Glue
Glue
SIZE: 7/16” x 2” (*Fluted or Spiral) PART # R25-4320C* R25-4320M* R25-4320B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 7/16” x 2-1/2” (*Fluted or Spiral) PART # R25-4325C* R25-4325M* R25-4325B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 7/16” x 3” (*Fluted or Spiral) PART # R25-4330C* R25-4330M* R25-4330B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 1/2” x 2” (*Fluted or Spiral) PART # R25-5020C* R25-5020M* R25-5020B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 1/2” x 2-1/2” (*Fluted or Spiral) PART # R25-5025C* R25-5025M* R25-5025B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 1/2” x 3” (*Fluted or Spiral) PART # R25-5030C* R25-5030M* R25-5030B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs.
METRIC SIZES
SIZE: 6mm x 25mm (*Fluted or Spiral) PART # R25-6250C* R25-6250M* R25-6250B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 6mm x 30mm (*Fluted or Spiral) PART # R25-6300C* R25-6300M* R25-6300B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 8mm x 30mm (*Fluted or Spiral) PART # R25-8300C* R25-8300M* R25-8300B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 8mm x 32mm (*Fluted or Spiral) PART # R25-8320C* R25-8320M* R25-8320B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs. SIZE: 8mm x 35mm (*Fluted or Spiral) PART # R25-8350C* R25-8350M* R25-8350B* (Bulk) QUANTITY 100 Pcs./Bag 1,000 Pcs./Bag 25,000 Pcs. 100,000 Pcs.
E-263
FAST CAP™ SELF ADHESIVE COVER CAPS PRODUCT FEATURES:
• 9/16” (14mm) and 11/16” (18mm) Diameter • Available in solid color PVC, PVC wood grain, PVC metallic, Unfinished 9/16” = 20 Sheets with 52 caps ea. solid wood and Finished solid wood 1040 per box nlike other caps, these do not depend on the screw for proper installation 11/16” = 20 Sheets with 36 caps ea. • U 720 caps per box • Does not require any additional gluing or calking
/
11 16”
STANDARD
PVC (Solids, Woodgrains and Metallics)
PART# SIZE PVC Solid Colors FCSP9169/16” FCSP111611/16” PVC Wood Colors FCWP9169/16” FCWP111611/16” PVC Metallic FCME9169/16” FCME111611/16” Unfinished (Real Wood) FCSW9169/16” FCSW111611/16” Prefinished (Real Wood) FCPW9169/16” FCPW111611/16”
MINI BOX
9/16” = 5 Sheets with 52 caps ea. 260 per box 11/16” = 5 Sheets with 36 caps ea. 180 caps per box PART# SIZE PVC Solid Colors FCMB9169/16” FCMB111611/16” PVC Wood Colors FCMB9169/16” FCMB111611/16” PVC Metallic FCMB9169/16” FCMB111611/16” Unfinished (Real Wood) FCMB9169/16” FCMB111611/16” Prefinished (Real Wood) FCMB9169/16” FCMB111611/16”
/
9 16”
White (WH)
Rosewood Oak (SD)
Presidential Walnut (PW)
Select Cherry (SC)
Antique White (AW)
Medium Oak (MD)
Imperial Walnut (IW)
Medium Cherry (MC)
Almond (AL)
Light Oak (LO)
Mahogany on Walnut (MW)
Bourbon cherry (BC)
Black (BK)
Hardrock Maple (HM)
Knotty Pine (KP)
Golden Cherry (GC)
Fog Gray (DG)
Manitoba Maple (MM)
Beech (BE)
Dark Cherry (DC)
Folkstone Gray (LG)
White washed Maple (WM)
Finished MDF (MDF)
Heritage Cherry (HT)
Natural Oak (NO)
Light Maple (LM)
Brushed Brass (BR)
Autumn Cherry (AC)
Golden Oak (GO)
Clear Maple (CM)
Polished Brass (PBR)
Fuji Cherry (FC)
Renaissance Oak (RN)
American Maple (AM)
Brushed Chrome (BCHR)
Red Mahogany (RM)
Pickled Oak (PO)
Natural Cherry (NC)
Polished Chrome (PCHR)
Dark Red Mahogany (RM)
Unfinished (Real Wood) Red Oak (RO)
Cherry (CH)
Sapele (SP)
Vg Fir (VF)
Walnut (WA)
White Oak (WO)
Mahogany (MG)
Pecan (PE)
Anigre (AN)
White Birch (WB)
Maple (MP)
Pine (PN)
Teak (TK)
Ash (AS)
Natural Birch (NB)
Hickory (HC)
Alder (AR)
Pre-finished (Real Wood) Ash (FAS)
Teak (FTK)
Red Oak (FRO)
Cherry (FCH)
Birch (FB)
Sapele (FSP)
Alder (FAR)
White Oak (FWO)
Mahogany (FMA)
Walnut (FWA)
Maple (FMP)
Anigre (FAN)
Yellow Pine (FYP)
FLUSH MOUNT DRILL BIT SYSTEM • Carbide tipped • Allows user to drill a pilot hole and countersink • The drill bits custom stop insures that the surface cannot be marred
E-264
(actual sizes)
PART # DESCRIPTION FCDB-0916-CB 9/16” Drill bit
POP-ON SCREW COVERS & BASES MATERIAL: POLYPROPYLENE
Pop-On Screw Covers & Bases may be used with flat head nails, countersunk wood screws, self-tapping screws rivets, drive screws, machine screws, washer faced screws and other types of fasteners. They may also be used with metric screws in M4, M4.5 and M6 screw sizes. ORANGE N
BLUE N
GREEN N SATIN CHROME
BLACK
POP-ON SCREW COVERS LIGHT PINK N LIGHT GRAY
N DARK BLUE BRITE CHROME
N TURQUOISE
N FOREST GREEN
N PURPLE
WHITE
SATIN COPPER
BRITE COPPER
N RED
Works with Cover
SC2-460 SC2-810 SC2-250
BASE #
SC2-B04P SC2-B069 SC2-B46F SC2-B8P SC2-B10P SC2-B810F SC2-B250P SC2-B250F
All Bases are a Natural Nylon Color
N
B
A
.115 .115 .115 .125 .125 .125 .125 .130
B
.415 .415 .415 .505 .505 .505 .620 .620
C
.120 .151 .151 .169 .195 .195 .245 .245
DIMENSIONS A B SC2-460 .515 .215* SC2-810 .630 .225* COVER#
A
BRITE BRASS
BEIGE
NEW COLORS
NEW: Green, Blue, Orange, Purple, Dark Blue, Light Pink, Forest Green, Red, Turquoise & Yellow. Stock Colors & Metallics Available: Black, White, Brown, Light Gray, Beige, Brite Brass, Brite Chrome, Satin Chrome, Brite Copper & Satin Copper. • New colors are in stock for SC2-250. • 1000 pc. minimum order for the SC2-460 and SC2-810 in new colors. • Over 100 colors are available, please inquire. • Polypropylene caps are UV stabilized for outdoor use (does not include metallics).
BROWN YELLOW N
10
D
SC2-250 .700 .260*
SCREW SIZE
POP-ON SCREW BASES
.275 #4 PAN .275 #6 PAN #4/#6 COUNTERSUNK .365 #8 PAN .365 #10 PAN #8/#10 COUNTERSUNK .490 1/4-20 PAN 1/4-20 COUNTERSUNK
*ALLOW APPROX.
A
.020” ADDITIONAL FOR ASSEMBLED HEIGHT.
C D
B
SCREW COVER CAPS Standard Screw Cover Caps Only .50 in Diameter PART #
COLOR
SC-1LBR Lt. Brown SC-1DBR Dk. Brown SC-1WH White SC-1BK Black SC-1AL Almond SC-1DG Dove Gray
For PHILLIPS or POSI-DRIVE
Petite Screw Cover Caps Only .40 in Diameter Part #
Color
SC-4WH White SC-4BK Black SC-4BR Brown SC-4BE Beige SC-4LG Light Gray
HINGED SCREW COVERS PART #
COLOR
SCREW SIZE
SC3-460BK Black #4/#6 PAN SC3-460WH White #4/#6 PAN SC3-460BE Beige #4/#6 PAN SC3-810BK Black #8/#10 PAN SC3-810LG Light Grey #8/#10 PAN SC3-810WH White #8/#10 PAN SC3-810BE Beige #8/#10 PAN SC3-250BK Black #1/4-20 PAN SC3-250WH White #1/4-20 PAN SC3-250BE Beige #1/4-20 PAN
MATERIAL: POLYPROPYLENE
A
29/64" 29/64" 29/64" 35/64" 35/64" 35/64" 35/64" 45/64" 45/64" 45/64"
LEXAN AND BUTYRATE STEM BUMPERS
SCREW PLUG BUTTON
B
3/16" 3/16" 3/16" 13/64" 13/64" 13/64" 13/64" 1/4" 1/4" 1/4"
USES: DOORS, BOTTOM of FURNITURE, ETC.
OVERHANGING HEAD
* Pin Diameter Tolerance = +/- .010 S49-750
PART #
R38-388BR
COLOR
Brown
PART #
S49-750CL S49-750BK S49-511CL
MATERIAL
Lexan Lexan Butyrate
COLOR
S49-511
Clear Black Clear
E-265
ANCHORING SOLUTIONS BY TOGGLER®
MADE IN THE U.S.A.
Fast, easy, secure anchoring in ALL building materials — drywall, gypsumboard, brick, concrete, block, stone, plaster ... • No special tools needed • Lowest in-place anchoring cost • Stronger than any anchor of comparable screw size Visit www.toggler.com for installation videos, full instructions, guide holding values & technical bulletins ®
brand
SnapSkru® Self-Drilling Drywall Anchors
• Holds over 80% more than other self-drilling drywall anchors • Works with #6, #8, and #10 screws (#8 preferred) • Locks on wall — resists shock & vibration • Positive “stop” resists overturning • Installs with screwdriver or screw gun • Can remove screw & item, leaving anchor in wall for reuse • Activates with audible “pop”, indicating correct installation PART #
DESCRIPTION
GRIP
TA-0012 SP™ drywall anchors 3/8"-5/8"
SCREW
#6-#10
SCREWS
pop!
Securely hang alarms, mirrors, bathroom accessories, picture frames, drapery, lighting fixtures, smoke SPTM detectors, thermostats, electric boxes, etc.
BOX
50
50
****#8 x 1 1/2" COMBO HEAD SCREWS INCLUDED IN TA-0012 BOXES — EACH ITEM IS SOLD IN FULL BOXES ONLY — NO BROKEN BOXES****
®
brand
SNAPTOGGLE® Toggle Bolts
Strongest holding in smallest hole • Vibration-proof—anchor centers bolt Can be used with a screw gun—won’t spin in the hole • Fast & easy Reusable in same hole—metal channel stays in place when bolt removed
® brand
The most modern, versatile, and effective anchor for light to heavy-duty anchoring in solid walls, which also works if you hit a hidden cavity
BA 3/16"-24 • BB 1/4"-20 = Drill diameter: 1/2" (13mm) Grip Range: 3/8"—3 5/8" (10mm—92mm) Minimum clearance behind wall: 1 7/8" (48mm) BC 3/8"-16 • BD 1/2"-13 = Drill diameter: 3/4" (19mm) Grip Range: 3/8"—2 1/2" (10mm—64mm) Minimum clearance behind wall: 1 7/8" (48mm)
® A series = Flushmount For through-the-fixture anchoring
Superior holding for heavy-duty anchoring in hollow walls and ceilings Use in drywall, concrete block, plaster, tile over drywall, or tile over greenboard
AF series = Flanged Use where there may be a hollow PART #
DESCRIPTION
THREAD
BA™ SNAPTOGGLE 3/16"-24 toggle bolt BB™ SNAPTOGGLE 1/4"-20 TA-1014 toggle bolt BC™ TOGGLER 3/8"-16 TA-1015 toggle bolt BD™ TOGGLER 1/2"-13 TA-1016 toggle bolt TA-1013
DRILL
GRIP
BOX
1/2"
3/8"- 3-5/8" 100
1/2"
3/8"- 3-5/8" 100
3/4"
3/8"- 2-1/2" 25
3/4"
3/8"- 2-1/2" 25
For ultimate tensile holding values, see the technical bulletins on our Website at www.toggler.com
*****THREADED BOLTS ARE NOT INCLUDED— EACH ITEM IS SOLD IN FULL BOXES ONLY — NO BROKEN BOXES*****
®
Hollow-Wall Anchors
Largest range of screw sizes per anchor • Vibration- & shock-proof 5/16" drill only • Can be used with a screw gun • Don’t spin in the hole
For ultimate tensile holding values, see the technical bulletins on our Website at www.toggler.com PART #
Ideal for attaching light to medium weight items to hollow walls or ceilings DESCRIPTION
GRIP
ALLIGATOR® Solid-Wall Anchors
Outhold metal anchors twice the screw size • Vibration- and shock-proof Corrosion-proof when used with a stainless steel screw • Set instantly Can be used with a screw gun • Don’t spin or countersink in the hole
Hollow
Flanged anchors give outstanding holding in tile over drywall & in tile over greenboard DESCRIPTION
AF™ 3/16" dia. flanged anchors AF6™ 1/4" dia. flanged anchors AF8™ 5/16" dia. flanged anchors A5™ 3/16" dia. flushmount anchors A6™ 1/4" dia. flushmount anchors A8™ 5/16" dia. flushmount anchors
SCREW
#4-#10 #6-#14 #6-5/16" #4-#10 #6-#14 #6-5/16"
Hollow doors & thin panels SCREW DRILL
5/16" 5/16" 5/16" 5/16" 5/16"
TB® Walls & Ceilings BOX
100 100 100 50 50
*****EACH ITEM COMES WITH 3 SETTING KEYS PER BOX — EACH ITEM IS SOLD IN FULL BOXES ONLY — NO BROKEN BOXES***** TOGGLER brand anchors are patented under one or more U.S. Patent Nos. 4,673,150; 4,878,790; 4,993,901; 5,028,186; 5,161,296; 5,983,385; 6,161,999; and foreign counterparts thereof and of 4,650,386 and 4,752,170. Other patents pending. TOGGLER and typeface, TA, TB, TC, TH, SnapSkru, SNAPTOGGLE, ALLIGATOR, and ALLIGATOR symbol are worldwide registered trademarks of Mechanical Plastics Corp. A5, AF5, A6, AF6, A8, AF8, BA, BB, BC, BD, SP, TD, T35, and TBS1 are worldwide trademarks of MPC.
DRILL
200 100 100 200 100 100
****EACH ITEM IS SOLD IN FULL BOXES ONLY — NO BROKEN BOXES*****
®
TH
Specialty Anchors
The same vibration- and shock-proof holding of the TOGGLER Hollow-Wall Anchors plus specially designed heads for specialized applications
®
TBS1
One-piece anchor with spacer for installing C-channel wall standards in perfect alignment and preventing jackout of the anchor.
For information and technical specs on our other TOGGLER specialty anchors, visit our Website: www.toggler.com PART #
TA-1012 TA-1023 TA-1022 TA-1024
DESCRIPTION
TH® picture hook anchors TBS1™ shelving anchors TBS2™pegboard anchors TBW™ wire shelf anchors
GRIP
3/8"-1/2" 3/8"-1/2" 3/8"-1/2" 3/8"-1/2"
SCREW DRILL BOX
#6-#14 #6-#14 #6-#14 #6-#14
5/16" 100 5/16" 50 5/16" 50 5/16" 50
*****EACH ITEM COMES WITH 3 SETTING KEYS PER BOX — EACH ITEM IS SOLD IN FULL BOXES ONLY — NO BROKEN BOXES*****
ECONOMY WALL ANCHORS
N EW
!
POLYPROPYLENE Used for through the fixture mounting 1/4" Diameter Flush Mount Anchor PART #
SCREW
STD-ANCHOR #6-#14
E-266
BOX
3/16" 1/4" 5/16" 3/16" 1/4" 5/16"
For ultimate tensile holding values, see the technical bulletins on our Website at www.toggler.com
Use for hanging pictures and mirrors on hollow or solid walls. Also used to string TV cable or phone wire.
TA®
TA-1009 TA® hollow door anchors 1/8"-1/4" #8-#12 TA-1010 TB® drywall anchors 3/8"-1/2" #6-#14 TA-1011 TC® drywall anchors 5/8"-3/4" #6-#14 TA-1021 TD™ drywall anchors 1" #6-#14 TA-1029 T35™ drywall anchors 1 3/8" #6-#14
PART #
TA-3103 TA-3101 TA-3102 TA-3106 TA-3104 TA-3105
Solid wall
Anchor extrudes down screw—up to 2x Anchor also works if it hits a hidden its original length—for high holding val- cavity or hollow in or behind the wall. ues. Anti-rotation fins prevent spinning. Screw thread locks into anchor’s teeth.
DRILL
1/4"
SOLD IN BOXES OF 100 PCS. - NO BROKEN BOXES
FLAT & PAN HEAD PARTICLE BOARD SCREWS Flat Head Screws
Pan Head Screws
Zinc or Black Phillips Drive, Coarse Thread
PART #
SCR-5500FHZ SCR-5625FHZ SCR-6500FHZ SCR-6625FHZ SCR-8625FHZ SCR-8750FHZ SCR-1625FHZ SCR-1750FHZ SCR-5500FHB SCR-5625FHB SCR-6500FHB SCR-6625FHB SCR-8625FHB SCR-8750FHB SCR-1625FHB SCR-1750FHB
FINISH
Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Black Black Black Black Black Black Black Black
Zinc or Black Phillips Drive, Coarse Thread
SIZE
#5 x 1/2” #5 x 5/8” #6 x 1/2” #6 x 5/8” #8 x 5/8” #8 x 3/4” #10 x 5/8” #10 x 3/4” #5 x 1/2” #5 x 5/8” #6 x 1/2” #6 x 5/8” #8 x 5/8” #8 x 3/4” #10 x 5/8” #10 x 3/4”
BULK CTN QTY.
PART #
25,000 20,000 20,000 15,000 12,000 10,000 10,000 8,000 25,000 20,000 20,000 15,000 12,000 10,000 10,000 8,000
SCR-6500PHZ SCR-6625PHZ SCR-6100PHZ SCR-8500PHZ SCR-8625PHZ SCR-8750PHZ SCR-8100PHZ SCR-1625PHZ SCR-1750PHZ SCR-1875PHZ SCR-1100PHZ SCR-6500PHB SCR-6625PHB SCR-6100PHB SCR-8500PHB SCR-8625PHB SCR-8750PHB SCR-8100PHB SCR-1625PHB SCR-1750PHB SCR-1875PHB SCR-1100PHB
FINISH
Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Black Black Black Black Black Black Black Black Black Black Black
SIZE
#6 x 1/2” #6 x 5/8” #6 x 1” #8 x 1/2” #8 x 5/8” #8 x 3/4” #8 x 1” #10 x 5/8” #10 x 3/4” #10 x 7/8” #10 x 1” #6 x 1/2” #6 x 5/8” #6 x 1” #8 x 1/2” #8 x 5/8” #8 x 3/4” #8 x 1” #10 x 5/8” #10 x 3/4” #10 x 7/8” #10 x 1”
BULK CTN QTY.
20,000 15,000 10,000 15,000 12,000 10,000 8,000 10,000 8,000 7,000 6,000 20,000 15,000 10,000 15,000 12,000 10,000 8,000 10,000 8,000 7,000 6,000
FINISHING WASHERS COLOR: NATURAL NYLON PART # CFW-6 CFW-8 CFW-10
SCREW SIZE 6 8 10
REACH & ROHS COMPLIANT
ID OD H IN. MM IN. MM IN. MM .143 3.63 .437 11.10 .100 2.54 .171 4.34 .515 13.08 .115 2.92 .191 4.85 .580 14.73 .152 3.86
FURNITURE ASSEMBLY FASTENERS POSI SCREWS • 250 PIECES PER CARTON •
PART # DESCRIPTION OP-0071 8x33mm HI-LO Funnel Head OP-0077 8x45mm HI-LO Funnel Head OP-6077 8x50mm HI-LO Funnel Head OP-6080 11x50mm HI-LO Funnel Head
E-267
PUSH KNOB LATCHES PRODUCT FEATURES:
.315”
.67”
.905”
.787”
.63”
.67”
Front Plate Push Knob
1.5”
ROUND
.75”
1.97”
OVAL
.0787”
Gold Gold
1.26”
Chrome
PART #
DPL-OV-G DPL-OV-CR
Chrome
PART #
FINISH
FINISH
DPL-RO-G DPL-RO-CR
Gold Chrome
.75” 1.26”
Gold Chrome
1.26”
SQUARE
Gold
Chrome
Satin Nickel
PART #
FINISH
DPL-SQ-G Gold DPL-SQ-CR Chrome DPL-SQ-SN Satin Nickel
E-268
.75” 1.26”
Door Thickness: 19/32” ~ 63/64”
.276”
Latch Body
.1575”
LATCH BODY
.98”
.47”
.905”
1.26”
Side View
1.18”
• Constructed of Zinc Alloy and Black ABS. • Knob and latch combined. • Easy installation - one 28mm hole to bore. • Non-handed. • Low profile. • Use with door thickness 19/32" - 63/64". • Provides 22 lbs. holding force. • Available in 3 shapes: Round, Oval and Square. • Ideal for use in RV's and boats. Anywhere space is limited for application.
LATCHES & CATCHES SUPER STRONG MAGNETIC CATCH
MAGNETIC CATCH
w/Strike Plate - 12 Lb. Pull
w/Strike Plate & Screws 10 Lb. Pull
DOUBLE MAGNETIC TOUCH LATCH
MAGNETIC CATCH
w/Strike Plate & Screws
Brown
PART # OI-418
PART # COLOR OI-130-BR Brown
Uses Screw
SCR-6625FHZ #6 x 5/8” Flat Head Zinc
MAGNETIC PUSH LATCH w/Strike Plate & Screws
PART # OI-346
DOUBLE BARREL FRICTION CATCH
High Density Polyethylene
PART # 274-167
COLOR Black
Uses Screw
PART # COLOR OI-150-BR Brown OI-150-WH White OI-150-BK Black
PART # COLOR OI-347 Black
Uses Screw
SCR-6625FHZ #6 x 5/8” Flat Head Zinc
SINGLE ROLLER DOOR CATCH
DOUBLE BALL CABINET CATCHES
PART # OI-335-ZP
PART # SIZE OI-881-BC 1-5/8" OI-882-BC 2" OI-883-BC 2-1/4"
Zinc Plated w/Strike Plate & Screws
Brass Plated
SCR-6625PHZ... #6 x 5/8” Pan Head Zinc
HEAVY DUTY ALUMINUM MAGNETIC CATCH
5 Lb. Pull w/Strike Plate-screws not included 2"L x 1 3/16" W x 13/16"H
• Perfect for large cabinet doors.
ALUMINUM MAGNETIC CATCH
ALUMINUM MAGNETIC CATCH 14 Lb. Pull
9 Lb. Pull 3 1/8" L x 1" W x 1/2"H w/Strike Plate & Screws
3 1/8" L x 1" W x 3/4"H w/Strike Plate & Screws
PART # OI-632-AL
PART # OI-732-AL
DOUBLE ROLLER CATCH
Self-locating Strike Plate w/Screws Finishes: Antique Brass & Zinc
• Suitable for institutional or commercial cabinets.
• Similar to EPCO #592. PART # OI-332-AL
Uses Screw
PART # OI-781AB OI-781Z
SCR-6625FHZ... #6 x 5/8” Flat Head Zinc
DRIVE-IN BULLET BALL CATCHES
SPRING TURN CATCH
With Adjustable Tension Ball
• Polished brass with matching keeper • For closets and large cabinet doors • For wood or metal doors • Furnished with screws Specifications:
For Cabinets & Cupboards
• Spring loaded latch w/turn knob • 2 sizes available • Furnished with screws
• 7/8” body diameter w/fins • 1-3/16” body length • 1” face with lip • 1-1/8” x 1-11/16” strike plate
CL-950
CL-952
PART #
PART # FINISH DBC-75 Polished Brass
SIZE FINISH 1-1/4"W x 1-7/8"H Latch Nickel Plated 7/16"W x 1-7/8"H Strike x 1-5/16"H Latch CL-952 1-1/4"W 7/16"W x 1-5/16"H Strike Brass Plated
CL-950
E-269
FURNITURE ASSEMBLY FASTENERS & ACCESSORIES FURNITURE JOINING HARDWARE
MODESTY BLOCK
USE #8 FLATHEAD SCREWS • Nylon/Polypropylene. • Designed to attach modesty panels to desks. • No pre-drilling required, three screw application. • Use #8 flathead wood screws (NOT INCLUDED). • Place block against inside modesty panel & tighten screws; place panel against desk front & tighten third screw from block bottom into desk top.
cb-*
corner brace
PART #
MP-*
MENDING PLATES
PART # DESCRIPTION CB-10 1” x 1” x 1/2” x 16 GA. CB-15 1-1/2” x 1-1/2” x 1/2” x 14 GA. CB-20 2” x 2” x 5/8” x 14 GA. CORNER BRACES CB-25 2-1/2” x 2-1/2” x 5/8” x 14 GA. CB-30 3” x 3” x 7/8” x 13 GA. CB-40 4” x 4” x 7/8” x 13 GA. FC-20 2” x 2” x 3/8” x 14 GA. FC-25 2-1/2” x 2-1/2” x 1/2” x 14 GA. FLAT CORNERS FC-30 3” x 3” x 1/2” x 14 GA. FC-40 4” x 4” x 3/4” x 14 GA. MP-25 2-1/2” x 5/8” x 14 GA. MENDING MP-30 3” x 3/4” x 14 GA. PLATES MP-40 4” x 7/8 x 13 GA.
MODESTY PANEL
250 PCS. PER BOX
fc-*
FLAT CORNER
COLOR
6073-BR Brown 6073-WH White
KD BRACKETS ZINC COUNTERSUNK HOLES FOR #10 FLATHEAD WOOD SCREW, 1-1/4” DIA., 2” LONG, 7/8” HOLE CENTER SPACING
KD67-ANGLE
ADJUSTABLE CABINET LEG • Adjustable height from 92mm to 157mm (3.68” to 6.28”). • Comes packed in sets of 4 legs, 4 leg tops, and 2 clip plinths.
KD68-FLAT
PART #
KD67-ZINC KD68-ZINC
PART #
OPHS-2609
SETS PER CARTON
25
FASTENERS HF-1 HOOK-IN-FITTINGS Hook-in fittings for mounting of panels, for built-in cabinets, room dividers, etc. USE #8 FLATHEAD SCREWS PART #
Brown Or White
Three Piece Plastic Nickel Plated Steel Kd Fastener USE #6 FLATHEAD SCREWS To purchase the PIN ONLY: Use Part #
K-9-PINS
PART # COLOR
HF-1
K-9WH White K-9BR Brown SCREW PART #
SCR-8625FHZ #8 x 5/8” Flat Head Black Finish
E-270
K-9 FASTENERS
SCREW PART #
SCR-6625FHZ #6 x 5/8” Flat Head Zinc Finish
ALUMINUM PANEL CLIPS “A FAST, EASY, & COST EFFECTIVE METHOD OF HANGING CABINETS, WALL PANELS, PARTITIONS, & SIGNAGE!” 0.092
MILL FINISH
NE IMPRW & OVED Available In Pre-Cut Pieces and Lengths !
Pre-Cut 2” Pieces With 2 Punched Holes
0.750
(Approximately 1-1/2” Apart) PART #
ALU111-2-M
1.785
4’ & 8’ Lengths
(Without Holes) PART # LENGTH ALU111-4 4' ALU111-8 8'
PART #
0.125
0.115
ALU112-2-M
0.375
Pre-Cut 2” Pieces With 2 Punched Holes (Approximately 1-1/2” Apart) PART #
ALUHAC22-2-M
2.25
12’ Lengths
(Without Holes) PART #
4' 8'
ALUHAC22-M
(Approximately 1-1/2” Apart)
Pre-Cut 2-1/2” Pieces With 2 Punched Holes (Approximately 1-3/4” Apart) PART #
PART #
1.00
4' 8'
0.750
1.375
Pre-Cut 2” Pieces With 2 Punched Holes
0.250
LENGTH
ALU211-4 ALU211-8
(Approximately 1-1/2” Apart) PART #
ALU112-4 ALU112-8
0.440
1.750
ALUHA4049-25-M
ALUHAC23-2-M
4’ & 8’ Lengths
12’ Lengths
2.00
1.595
(Without Holes)
Pre-Cut 2” Pieces With 2 Punched Holes
(Without Holes) PART # LENGTH
0.360
ALU211-2-M
4’ & 8’ Lengths
4’ & 8’ Lengths
0.120
Pre-Cut 2” Pieces With 2 Punched Holes
(Approximately 1-1/2” Apart) PART #
(Without Holes) PART # LENGTH
(Without Holes) PART #
ALUHA4049-4-M ALUHA4049-8-M
ALUHAC23-M
0.250
4' 8'
SUSPENSION RAIL & BRACKETS PRODUCT FEATURES:
BONUS Save time with this unique hole pattern feature
• All new patent pending suspension rail makes quick work of any installation. • The unique hole pattern allows the installer to quickly locate all of the stud locations. Simply find the first stud, identify the hole and there will be a stud every time the pattern repeats. • All metal brackets - cover sold separately. Rail & Bracket Cover Colors: • 286 lb. carrying capacity per wall cabinet. • Left (L) or Right (R) brackets available, please specify when ordering. Almond
SUSPENSION RAIL & COVERS PART#
SUS-R SUS-C-WH SUS-C-AL SUS-C-BR
DESCRIPTION
8’ Suspension Rail White Rail Cover Almond Rail Cover Brown Rail Cover
BOX QUANTITY
10 50 50 50
Brown
White
SUSPENSION RAIL BRACKETS & COVERS PART#
(SPECIFY LEFT OR RIGHT)
SUS-B-(L or R) SUS-BC-WH-(L or R) SUS-BC-AL-(L or R) SUS-BC-BR-(L or R)
COLOR
Rail Bracket Bracket Cover-White Bracket Cover-Almond Bracket Cover-Brown
BOX QUANTITY
200 200 200 200
E-271
RUBBER-SEALS® w/ PEEL & STICK Black
114-113 (black only) 500 Ft. Coils w/Adhesive
(White where noted)
Sponge Rubber
114-1333 (black) 114-1333-OW (off white)
500 Ft. Coils w/Adhesive
Recommended Temperature Range for General Product Apllications -20° through +150°
COLOR Black
MANY APPLICATIONS: Cabinets Doors Windows Camper Shell Doors Skylights Sunroofs and many others
114-114 (black only)
500 Ft. Coils w/Adhesive
COLOR Black
COLOR Black White
114-119 (black only) 500 Ft. Coils w/Adhesive
COLOR Black
EUROPEAN DUST SEAL SYSTEMS DR-1-
APPLICATION: DR-1, DR-6,
BLACK, WHITE, BROWN PVC - 8 FT. LENGTHS
DR-2-
BLACK, WHITE, BROWN, CLEAR, ALMOND DUAL DUROMETER/PVC - 8 FT. LENGTHS
APPLICATION
DR-6-
WHITE, ALMOND POLYPROPYLENE W/SANTOPRENE 1000 FT. COILS
ULTRA PILE DUST SEAL/WEATHERSEAL w/ADHESIVE SELF SUPPORTING PILE IS ALWAYS ON CENTER AND HAS THE INTEGRITY AND CONSISTENCY TO ENSURE A TIGHT SEAL.
50' Minimum Coil
MANY APPLICATIONS: Windows Doors Showcases PART# DESCRIPTION COLOR DS-150-GY .270 W x .150 H Gray DS-200-GY .270 W x .200 H Gray
E-272
MISCELLANEOUS HARDWARE MIRROR CLIPS
Designed to attach mirrors, glass, decorative panels, etc. to any flat surface
R45-283CL - Clear Diamond Back
R45-293CL - Clear
• Made of crystal styrene. • Made of crystal styrene, ribbed. • Use a #6 Pan or Flat head screw (Sold separately). • Fits 1/4” glass thickness. • Fits 1/4” glass thickness.
PART #
PART #
R45-283CL
Material: H.D.P.E. • Color: Natural White FOR 3/16” OR 1/4” GLASS
R45-433CL
BULK SCREW PART # CTN. QTY. SCR-5625FHZ 20,000 #5 x 5/8” Flat Head Zinc Finish
CORNER PROTECTORS 3/8”
2 1/8”
• Made of crystal styrene. • Fits 1/8” glass thickness.
PART #
R45-293CL
BULK SCREW PART # CTN. QTY. SCR-6625FHZ 15,000 #6 x 5/8” Flat Head Zinc Finish
R45-433CL - Clear
BULK SCREW PART # CTN. QTY. SCR-6625FHZ 15,000 #6 x 5/8” Flat Head Zinc Finish
PLASTIC WEDGES & DOOR STOPS Material: H.D.P.E.
• Wedges are used to assure proper positioning of hinged doors. • Wedges guide doors when case is out of alignment. • Advantages: neat appearance, assures doors stay closed, economical & does not require finishing. • May be installed at top or bottom of all doors, side of single doors.
R50-441
PART #
PART #
CP-448
GC-215
CORNER BRACES
Material: H.D.P.E. R44-210BK, R44-210WH R44-200BK, R44-200WH (Available In Black or White)
(Available In Black or White)
R50-443
Use #6 Pan Head Screws
Use #6 Pan Head Screws
OTHER LENGTHS AVAILABLE - PLEASE INQUIRE
CORNER BRACE
CORNER BLOCK
GLUE BLOCK (Styrene)
(WHITE)
(WHITE)
(BEIGE) 250 PCS. PER BOX
R44-370
1.190
R50-454
CB-2500
R44-445
PART # COLOR R50-441DBR Dark Brown R50-443BE Beige R50-454DBR Dark Brown
BREAK-AWAY PLASTIC FURNITURE WEDGE
2.600 3.690
PART # COLOR 58-076-400 Dk. Brown
E-273
FASTENERS RATCHET ASSEMBLY POST & SCREW
REACH & ROHS COMPLIANT
• Polypropylene • Simply press together these screws with serrated pins for fast and easy assembly • Works with flat panels, punched papers, key cases, catalogs, etc. • Not intended for applications requiring removable/reusable fasteners! • Usable in corrosive environments • Will not mark or mar most surfaces
SP-500BK
PART #
SP-250BK SP-250WH SP-375BK SP-375WH SP-500BK SP-500WH SP-750BK SP-750WH
COLOR LENGTH
Black White Black White Black White Black White
1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4" 3/4"
NATURAL NYLON ARROW CLIPS • Molded natural nylon fasteners offer an inexpensive fast method to hand assemble metal, wood and plastic composition or any other thin gauge materials • Reusable • Specially designed body compresses through a pre-punched hole and springs back to shape, locking the assembled parts securely • Provides a vibration, abrasion and corrosion resistant connection • Electrically insulating
REACH & ROHS COMPLIANT
PART #
AC-001 AC-003 AC-006 AC-009 AC-015 AC-016
HOLE SIZE
.182/.192 .151/.161 .182/.192 .250/.260 .118/.122 .250/.260
PANEL HEAD HEAD CLIP THICKNESS DIA. HEIGHT LENGTH DIA. RANGE 'D' 'A' 'B' 'C'
.062/.125 .062/.125 .310/.330 .125/.187 .062/.125 .360/.380
.360 .280 .370 .484 .280 .610
.060 .040 .060 .060 .060 .065
.400 .390 .540 .575 .390 .810
.225 .196 0.225 .290 .150 0.286
OTHER SIZES AVAILABLE - PLEASE INQUIRE
PLASTIC FASTENERS
REACH & ROHS COMPLIANT
CANOE FASTENERS
ROW BOAT FASTENERS
Black & White
Black & White
CELCON
HDPE
• Fits hole size 1/4" • Fits work thickness 1/4"
PF8-11
PART #
PF6-20BK PF6-20WH PF6-31BK PF6-31WH PF8-11BK PF8-11WH
COLOR
Black White Black White Black White
HOLE HEAD WORK SIZE SHAFT DIA. THICKNESS
3/16" 5/8" 3/16" 5/8" 3/16" 5/8" 3/16" 5/8" 1/4" 11/16" 1/4" 11/16"
13/32" 13/32" 27/64" 27/64" 1/2" 1/2"
.228 .228 .325 .325 .187 .187
PART #
TREE FASTENERS NYLON
Black, White & Gray Used for one-time applications & is purposely difficult to remove PF8-16BK
E-274
PF8-24BK
COLOR
CF8-20BK Black CF8-20WH White
PART #
PF8-16BK PF8-16WH PF8-20BK PF8-20WH PF8-20GY PF8-24BK PF8-28BK PF8-32BK
COLOR
Black White Black White Gray Black Black Black
HOLE HEAD WORK SIZE SHAFT DIA. THICKNESS
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1/2" 1/2" 5/8" 5/8" 5/8" 3/4" 7/8" 1"
11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16"
.180-.220 .180-.220 .180-.380 .180-.380 .180-.380 .180-.570 .180-.700 .180-.820
ADJUSTMENT KNOBS
1
• COLOR - BLACK • Constructed of durable nylon or polypropylene knobs with zinc plated steel studs and inserts. • Designed for economical, light-duty securing and clamping applications. • Resistant to water and solvents. Triangle Style Male
Female
Male
Female
Male
STYLE
1
2
3
4 5 6
PART # S7-F13BK S7-F10BK S7-F15BK S7-F14BK S7-F17BK S7-F18BK S7-F19BK S7-F20BK S7-F21BK S7-N12BK S7-N13BK S7-N22BK S7-N23BK S7-N24BK S7-N25BK S7-N26BK S7-N27BK S7-N28BK S7-N29BK S7-K14BK S7-K15BK S7-A30BK S7-A31BK S7-A32BK S7-A33BK S7-A34BK S7-A35BK S7-A36BK S7-A37BK S7-C21BK S7-I31BK S7-J21BK
THREAD SIZE 1/4-20 5/16-18 5/16-18 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 5/16-18 1/4-20 5/16-18 1/4-20 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 5/16-18 5/16-18 5/16-18 5/16-18 1/4-20 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 5/16-18 5/16-18 1/4-20 1/4-20 1/4-20
Ergo T Style
6
Ball Style
Male Only!
Female
DIAMETER 1.125" 1.575" 2.36" 1.575" 1.575" 1.575" 1.575" 2.36" 2.36" 1.575" 2.36" 1.575" 1.575" 1.575" 1.575" 1.575" 1.575" 2.36" 2.36" 1.575" 2.36" 1.575" 1.575" 1.575" 1.575" 1.575" 1.575" 2.36" 2.36" 1.25" 2.50" 1.375"
5
Female Only!
Scalloped Style
3
Fluted Grip Style
Male Only!
Star Style
2
4
TYPE Male Female Female Male Male Male Male Male Male Female Female Male Male Male Male Male Male Male Male Female Female Male Male Male Male Male Male Male Male Male Female Male
STUD LENGTH .75" N/A N/A 1.375" .50" .75" 1.375" .50" .75" N/A N/A .75" 1.375" .50" .75" 1.00" 1.375" .75" 1.50" N/A N/A .75" 1.375" .75" .50" 1.00" 1.50" .75" 1.50" .75" N/A .75"
MATERIAL Nylon Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Nylon Nylon Nylon
E-275
3M™ HOT MELT BONDING SYSTEMS PGEC (for 8" sticks)
PGTC-Q (for 8"sticks)
Polygun™ Applicators
HELP YOU IMPROVE PRODUCTIVITY, LOWER COST & MINIMIZE WASTE Our new, lightweight, easy-to-use Polygun™ Applicators use Jet-melt™ Adhesives for fast,strong bonds on a variety of surfaces - wood, plastic, foam, fabric, cardboard, rubber and more. (TECHNICAL INFO AVAILABLE UPON REQUEST)
Jet-melt™ Adhesives
120 Volt/150 Watt
High Temperature Applicators
Deliver up to 3.5 lbs of adhesive per hour at 385°F PART # DESCRIPTION PGTC-Q Standard Gun W/Quadrack & Palm Trigger
Multiple Temperature Applicator
Deliver up to 2.6 to 5.5 lbs of adhesive per hour at 26.-450°F PART # PGEC
DESCRIPTION Multiple Temperature Gun
Provides multiple temperatures with choice of preset temperature module kits that insert into the handle. Capable of dispensing new low melt Jet-melt™ adhesives.
LOW TEMPERATURE GLUE STICKS HIGH TEMPERATURE GLUE STICKS
PART #
FEATURES/APPLICATION IDEAS Improved "hot tack" when dispensed 3762-LM at low melt temperature. Can bond Lt. Amber beadboard, corrugated, displays. PART #
BOX PART # WEIGHT
STICK SIZE
3738 11 lbs. HIGH 3748-Q 11 lbs. TEMP 3762 11 lbs. GLUE STICKS 3762-Q 11 lbs. 3764 11 lbs. 3792 11 lbs. 3792-Q 11 lbs.
5/8" x 2" 5/8" x 8" 5/8" x 2" 5/8" x 8" 5/8" x 2" 5/8" x 2" 5/8" x 8"
BOX
STICK
COLOR Tan Off White Tan Tan Clear Clear Clear
HEAT RESISTANCE
130° 175° 130° 130° 140° 140° 140°
HEAT
LOW PART # WEIGHT SIZE COLOR RESISTANCE TEMP 130° GLUE 3762-LM-Q 11 lbs. 5/8" x 8" Lt. Amber STICKS 3792-LM-Q 11 lbs. 5/8" x 8" Clear 140° PART #
FEATURES/APPLICATION IDEAS Long bonding range when dispensed at low melt 3792-LM temperature. Can bond woods, P.O.P. displays, Clear corrugated, polyolefins and other lightweight materials.
FEATURES/APPLICATION IDEAS PART # High delivery and long bonding range. General 3762 purpose for foundry sand cores, exhibits, wood Tan bonding, corrugated and chipboard. 3748 Good thermal and electrical properties. Non3764 Off corrosive to copper. Can bond polypropylene, Clear White polyethylene.
FEATURES/APPLICATION IDEAS Excellent "hot tack", fast-setting for corrugated packaging, recouperage, repacking area, warhouse. Low cost, general purpose. Can bond chipboard, wood. Can bond many plastics. Good impact resistance at low temperature. Can hold ABS, polycarbonate, rigid PVC, polypropylene, polyethylene. Clear multi-purpose product for wood, corrugated, 3792 lightweight substrates, furniture, upholstery, novelties. Clear Can bond fabric and other lightweight materials.
3738 Tan
3MTM Flexible Adhesives Scotch-Grip™ and Fastbond™ brand adhesives are industrial-quality products designed to provide innovative answers to a wide variety of non-structural bonding problems. Some formulations are tailored to specific types of applications; while others are multipurpose and used worldwide in hundreds of different product assembly operations. (TECHNICAL INFO AVAILABLE UPON REQUEST)
30 NF Fastbond™ Contact Adhesive, Green
30 NF Fastbond™ Contact Adhesive, Clear
A water dispersed high strength contact adhesive that changes color from blue to green when dry. Has high coverage, a long bonding range and good heat resistance. Can be used to bond foamed plastics, plastic laminate, wood, plywood and wood veneer, and canvas to themselves and each other, as well as for postforming operations. Meets requirements of MIL-A-24179-A.Non-flammable in the wet state.
A water dispersed high strength contact adhesive that has high coverage, a long bonding range and good heat resistance. Can be used to bond foamed plastics, plastic laminate, wood, plywood and wood veneer, and canvas to themselves and each other, as well as for postforming operations. Meets requirements of MIL-A-24179-A. Nonflammable in the wet state.
(Protect From Freezing)
PART # SIZE 4276-Q Quart 4276-G Gallon 4276-P 5 Gallon Pail
E-276
CASE QUANTITY 12 4 -
(Protect From Freezing)
PART # 4274-Q 4274-G
SIZE Quart Gallon
CASE QUANTITY 12 4
STA’-PUT ADHESIVES MULTI-PURPOSE SPRAY ADHESIVE SYSTEM STA’-PUT SPH Colors: Clear & Red
STA’-PUT spray adhesive has been formulated to provide excellent adhesion over a wide range of product applications; securing duct liner, securing duct wrap, board lamination, laminates to laminates, sealing vapor barrier, M.B.I. repair, fire proofing base coat, sealing flex foam, building insulation blocks for a pipe covering operation, mitering fittings & ASJ, FSK, aluminum, PVC to all pipe insulations. • • • • •
NON-FLAMMABLE COMPLETELY PORTABLE NO CLOGGED TIPS GUARANTEED SHELF LIFE NO FLASHING REQUIRED
• EASY CLEAN UP • DRIES CLEAR • WATER RESISTANT • HIGH TACK • QUICK SETTING
SPRAY ADHESIVE
PART # SAS-45 SAS-45-R SAS-50 SAS-50-R SAS-51 SAS-51-R
PERFECT FOR LAMINATES!
DESCRIPTION 15 oz. Can 15 oz. Can 11 lb. Canister 11 lb. Canister 37 lb. Canister 37 lb. Canister
COLOR Clear Red Clear Red Clear Red
STA’-PUT SPH LIQUID PART # SAS-70
LIQUID ADHESIVE DESCRIPTION 5 Gallon Drum
COLOR Clear
STA’-PUT II has been specifically formulated to provide permanent bonding of Styrofoam and all other polystyrene materials with no adverse reaction to the bonded surfaces. Requires 4 minutes to set and bond. Firm pressure is required only during the immediate bonding process.
“PRO” SPRAY GUN Stainless Steel Spray Tip
STA’-PUT II
Colors: Clear & Blue
Stainless Steel Retain Nut
SPRAY ADHESIVE
PART # SAS-65 SAS-65-BL SAS-66 SAS-66-BL
DESCRIPTION COLOR 13 oz. Can Clear 13 oz. Can Blue 30 lb. Canister Clear 30 lb. Canister Blue
SP-80 GREEN ADHESIVE
Solvent based, low VOC, non-chlorinated contact adhesive certified for many industry standards
SPRAY ADHESIVE
PART # DESCRIPTION COLOR SP-80-14 14 oz. Spray Can Clear SP-80-27 27 lb. Canister Clear
Exclusive SS Needle Valve
Shut-off/ Valve Seat
Adjustable Tip #ST6502
N EW
!
Chrome Finished Handle
PART # SG200 ST6502 MH973 MH974 MH978
Four Finger Trigger
Pattern Adjustment Wheel/Trigger Lock
DESCRIPTION Spray Gun Adjustable Tip 12’ Hose 18’ Hose 25’ Hose
STA’-PUT SPH/II REMOVER PART # DESCRIPTION SAS-46 15 oz. Can
LIQUID ADHESIVE
PART # DESCRIPTION COLOR SP-80-5 5 gal. Pail Drum Clear
PLEASE NOTE: STA’-PUT ADHESIVES CAN ONLY BE SHIPPED VIA RPS!
E-277
DOUBLE COATED ADHESIVE TAPES High-strength Scotch™ VHB tapes are used throughout the industry today to replace screws, rivets, welding, liquid adhesives and other permanent assembly methods. They offer greater design flexibility and are often the key to dramatic improvements in styling and performance. Moreover, they allow faster, easier assembly, eliminate cleanup & increase profits. (TECHNICAL INFO AVAILABLE UPON REQUEST)
3M™ Brand VHB™ HIGH STRENGTH ACRYLIC FOAM TAPE
Clear, closed cell acrylic foam carrier - excellent for joining transparent materials.
Very conformable gray closed cell acrylic foam tape 45 mill thick, paper liner.
ROLL CASE THICKNESS WIDTH SIZE QUANTITY
PART #
4905-0500 4905-0750 4905-1000 4910-0500 4910-0750 4910-1000
1/2" 3/4" 1" 1/2" 3/4" 1"
.020 .040
72 Yds. 36 Yds.
18 12 9 18 12 9
PART #
4941-0500 4941-0750 4941-1000
PART #
18 12 9
White, closed cell acrylic foam carrier - features an all-purpose adhesive.
Very conformable black closed cell acrylic foam tape 45 mill thick, PE liner. 5952-0500 5952-0750 5952-1000
CASE QUANTITY
PART #
4930-0500 4930-0750 4930-1000 4950-0500 4950-0750 4950-1000
CASE QUANTITY
18 12 9
ROLL CASE THICKNESS WIDTH SIZE QUANTITY
.025 .045
1/2" 3/4" 1" 1/2" 3/4" 1"
72 Yds. 36 Yds.
3M™ RUBBER-BASED POLYETHYLENE FOAM TAPE PART #
THICKNESS WIDTH
4462-0500* 4462-0750* 4462-1000*
1/2" 3/4" 1"
.030
ROLL CASE SIZE QUANTITY
72 Yds.
PART #
4466-0500* 4466-0750* 4466-1000*
18 12 9
THICKNESS WIDTH
.060
1/2" 3/4" 1"
18 12 9 18 12 9
ROLL CASE SIZE QUANTITY
36 Yds.
18 12 9
PLEASE NOTE: ABOVE TAPES ARE STOCK ITEMS. OTHER SCOTCH™ BRAND ADHESIVE TAPES ARE AVAILABLE PLEASE INQUIRE FOR LEAD TIMES
RUBBER-BASED DOUBLE COATED ADHESIVE TAPES POLYETHYLENE FOAM TAPE Rolls
Dots
Available 1/32” or 1/16” thick - 1/2”, 3/4” or 1” Wide - White Only
Available 1/32” or 1/16” thick - 1/2”, 3/4” or 1” Wide - White or Black - 216 Ft. Rolls 1/32" THICK PART #
RFT1-0500RFT1-0750RFT1-1000-
WIDTH
1/2” 3/4” 1”
ROLLS PER CASE
24 16 12
1/16" THICK PART #
RFT2-0500-WH RFT2-0750-WH RFT2-1000-WH
E-278
ROLLS PER WIDTH CASE
1/2” 3/4” 1”
CLEAR FILM TAPE
24 16 12
• .5mil polyester film with 2mil adhesive • Rubber based adhesive not recommended for direct UV exposure applications • Application temperature: 65°F-100°F • Service temperature: -20°F-150°F • Roll core: 3” Diameter
1/32" THICK PART #
DIA.
RFT1-120 1/2” RFT1-340 3/4” RFT1-100 1”
1/16" THICK PART #
DIA.
RFT2-120 1/2” RFT2-340 3/4” RFT2-100 1”
PART #
DK-0500 DK-0750 DK-1000