2012
ORGANIZATION SYSTEMS www.panelplus.co
G
pgs. 324-383
Base Cabinet Storage Solutions • Base & Wall Filler Pull Outs pgs. 375-376 • Chrome Blind Corner Optimizer pg. 375 • Cookware Organizers pg. 373 • Pull Out Side Mount Organizer pg. 374 • Under Sink Chrome Basket pg. 374
Closet Organizers
Organization Systems
Kitchen, Closet, Garage, Laundry & Bathroom
G-324
• Closet Safe - pg. 340 • Coat & Hat Hooks - pg. 357 • Hang Rod Brackets (Steel) - pgs. 354-356 • Jewelry Trays - pg. 350 • Lighting (LED Motion) - pg. 359 • Pant Racks - pg. 352 • Pull Down Closet Rod - pg. 358 • Round & Oval Hang Rod Aluminum - pg. 354 Steel - pgs. 355-356 • Shoe Rail - pg. 350 • Suspension Rails - pg. 357 • Tie Racks - pgs. 351-352 • Vanguard® Closet Solutions • Closet Shelf Supports - pgs. 341-342 • Hand Rod Supports - pg. 342 • Wood Hand Rod - pg. 343 • Wire Baskets - pg. 353
Cutlery Organizers • Knife & Cutting Board pg. 368 • Plastic Trays - pgs. 369-370 • Spice Trays (Plastic) pg. 370 • Spice Trays (Wood) pg. 368 • Wood Cutlery - pg. 371
Closet Lighting
• LED Motion Light pg. 359
Counter Mount Waste Containers pg. 333
Door Mount • Cutting Boards - pg. 377 • Door Storage Trays - pg. 371 • Spice Racks - pgs. 372, 378 • Vertical Foil Rack - pg. 378
Galley Rail Filler Mouldings & Caps
pg. 334
• Beaded/Fluted Reversible Filler Mouldings - pg. 334 • Beaded/Fluted Caps - pg. 334
Hampers • Roll Out - pg. 360 • Wire - pg. 351
Garage Organization System • Bike & Sports Equipment Hanger - pg. 346 • Brackets - pg. 348 • Great Wall - pg. 349 • Tool Racks - pgs. 345, 347 • Utility Baskets - pg. 344 • Utility Hooks - pgs. 347-348
Heavy Duty Mixer / Appliance Lift pg. 366
Lazy Susans
Ironing Board Center
• Deep Bin Super Susan - pg. 365 • D-Shaped Wood - pg. 332 • Half Moon Polymer - pg. 329 • Mouldings - Flexible - pg. 332 • Polymer - pgs. 326-329 • Wood - pgs. 330-332
pg. 359
Omega Kitchen Storage
Pull-Out Waste Container
• Deep Bin Super Susan - pg. 365 • Plate Display Unit - pg. 364 • Select Spice Susan - pg. 365 • Spice Rack - pgs. 364-365 • Tra-Sta Deep Drawer Kit - pg. 365 • Tra-Sta Organizer - pg. 365 • Wood Spice Drawer Insert - pg. 364
Range Hoods (Wood)
• Built In Waste Bins - pg. 333 • Double Container - pgs. 379-380 • Solid Wood Pull-Out With PVC Waste Bins - pg. 383 • Stainless Steel - pg. 382 • Wire - pg. 380-381
Rev•A•Shelf®
pgs. 362-363
Spice Organizers • Select Spice Susan pg. 365 • Spice Drawer Inserts pgs. 364, 368 • Spice Drawer Trays pg. 370 • Spice Racks pgs. 364, 372, 378
• Applicance Lift - pg. 366 • Bathroom / Laundry - pgs. 351, 359-360 • Closet Organizers - pgs. 350-353, 358-359 • Cutlery Trays - pgs. 368-371 • Kitchen Door / Cabinet Organizers - pgs. 371-378 • Lazy Susans - pgs. 326-332 • Pull-Outs - pgs. 351-353, 359-360, 372-376, 379-383 • Sink Front Trays - pg. 367 • Waste Bins / Containers - pgs. 333, 379-383 • Wine & Stemware - pg. 361
Tambour
Sink Front Trays & Hardware
• Appliance Garage Kit - pgs. 336, 339 • Bamboo Doors - pg. 335 • Garage Door Sheets - pgs. 336-337 • Paintable - pg. 335 • Roll Top Desk Door - pg. 337 • Spring Tension Track Kit - pg. 339 • Tracks - pg. 338
pg. 367
Tot - Lock
Towel Holder
pg. 366
pgs. 372
Tray Dividers Wicker Baskets
Wine & Stemware
pg. 377
pg. 361
pgs. 372
G-325
FULL CIRCLE POLYMER LAZY SUSANS DEPENDENTLY ROTATING SHELVES (ALL SHELVES TURN TOGETHER AT ONE TIME)
Pivot
• Features a 3/4” chrome plated diameter shaft system for absolute durability. • Accommodates inside cabinet height ranges of 24” to 46”. • I nstallation Hardware included with all units.
collar assembly
shelves
# of DIAMETER Part # Color Shelves OF SHELVES 6012-18-11-52 White 2 18” 6012-18-15-52 Almond 2 18” 6012-20-11-52 White 2 20” 6012-20-15-52 Almond 2 20” 6012-24-11-52 White 2 24” 6012-24-15-52 Almond 2 24” 6012-28-11-52 White 2 28” 6012-28-15-52 Almond 2 28” 6013-18-11-526 White 3 18” 6013-18-15-526 Almond 3 18” 6013-20-11-526 White 3 20” 6013-20-15-526 Almond 3 20”
3/4” Diameter shaft
2 shelf set
ACCOMMODATES INSIDE CABINET HEIGHT 24” to 31” 24” to 31” 24” to 31” 24” to 31” 24” to 31” 24” to 31” 24” to 31” 24” to 31” 38” to 46” 38” to 46” 38” to 46” 38” to 46”
3 shelf set
INDEPENDENTLY ROTATING SHELVES (SHELVES TURN INDEPENDENT OF EACH OTHER)
1” diameter 5” long shaft
• Single shelf unit features a 1” chrome plated x 5” high shaft, positioner assembly and mounting screws for a smooth & finished look. • The two (2) shelf sets feature a 1” chrome plated shaft system with a height adjustment of 26”- 32”. Positioner mounts • Installation hardware included with all units.
assembly underneath not shown in photo
single shelf - 6621 series
cHROME hUB fEATURE
1” diameter shaft
shelf
6072 series
G-326
Part # 6072-16-15-52 6072-16-11-52 6072-18-15-52 6072-18-11-52 6072-20-15-52 6072-20-11-52 6072-24-15-52 6072-24-11-52 6072-28-15-52 6072-28-11-52 6072-32-15-52 6072-32-11-52
Color Almond White Almond White Almond White Almond White Almond White Almond White
# of Shelves 2 2 2 2 2 2 2 2 2 2 2 2
DIAMETER OF SHELVES 16” 16” 18” 18” 20” 20” 24” 24” 28” 28” 32” 32”
ACCOMMODATES INSIDE CABINET HEIGHT 26”- 32” 26”- 32” 26”- 32” 26”- 32” 26”- 32” 26”- 32” 26”- 32” 26”- 32” 26”-32” 26”-32” 26”-32” 26”-32”
“D” SHAPED POLYMER LAZY SUSANS SETS INDEPENDENTLY ROTATING SHELVES (SHELVES TURN INDEPENDENT OF EACH OTHER) D 5” Long Shaft 1” Diameter
D-SHAPE A
C
• Available in 20” and 22” diameters.
B
chrome hub
DIAMETER A B C D 20” 8-7/8” 9-1/4” 19” 20-1/8” 22” 7-3/16” 16-5/8” 18-3/16” 22” shaft
shelf
PART # 6272-20-11-52 6272-20-15-52 6272-22-11-52 6272-22-15-52
COLOR White Almond White Almond
• “ D” shaped Susans give the maximum space utilization in diagonal wall & base cabinets. •2 shelf accommodates an inside cabinet height (ICH) of 26-32”. • 1” Diameter Shaft.
# OF SHELF ACCOMMODATES SHELVES DIAMETER INSIDE CABINET HEIGHT 2 20” 26-32” 2 20” 26-32” 2 22” 26-32” 2 22” 26-32”
PIE CUT POLYMER LAZY SUSANS CORNER BASE CABINET SYSTEM Dependently rotating - shelves ATTACH TO DOOR • These units are recognized throughout the industry as the leader in strength functionality and adjustability for a corner base system. • The 24” & 28” feature 1” diameter shaft system. • All diameters feature hardened screws for non slip protection and lubrication on polymer components.
D PIE CUT
C DIAMETER 24” 28”
A 1-3/8” 3”
B C 1-15/16 13-15/16” 4-1/4” 18-1/4”
B
shaft
A
shelf
Z
D Z 24” 10-9/16” + 1/8” 28” 10-11/16” + 1/8” base
PART # 6942-24-11-52 6942-24-15-52 6942-28-11-52 6942-28-15-52
COLOR White Almond White Almond
SHELF DIAMETER 24” 24” 28” 28”
# OF SHELVES 2 2 2 2
SHAFT DIAMETER 1” 1” 1” 1”
ACCOMMODATES INSIDE CABINET HEIGHT 26”-32” 26”-32” 26”-32” 26”-32”
G-327
KIDNEY SHAPED POLYMER LAZY SUSANS INDEPENDENTLY ROTATING SHELVES (SHELVES ROTATE INDEPENDENT OF EACH OTHER)
5” shaft
D
SHELF SPECIFICATIONS C
• Available in a single tray with a 5” chrome plated shaft and hardware set for a smooth finished look. • Available in a two shelf set with a 1” diameter chrome plated steel tubing, chrome hub, telescoping upper shaft and zinc die cast hardware components for superior independent rotation. SHELF DIAMETER 18” 24” 28” 32” PART # 6472-18-11-52 6472-18-15-52 6472-24-11-52 6472-24-15-52 6472-28-11-52 6472-28-15-52 6472-32-11-52 6472-32-15-52 universal bracket
HEIGHT 1-7/16” 2-5/16” 2-9/16” 2-9/16” COLOR White Almond White Almond White Almond White Almond
SPILL LIP 3/4” 3/4” 1” 1”
polymer hub •
B
A
DIAMETER A B C 18” 1-3/4” 2-13/16” 11-13/16” 24” 1-1/2” 2-5/16” 14-5/16” 28” 3” 4-11/16” 18-5/8” 32” 4-1/4” 6-7/16” 22-7/16”
Chrome Hub Feature
1/2” CL. (REF)
A R B D 2-1/4” 9” 6-13/16” 11-3/4” 2” 12” 10-1/16” 14-1/2” 3-1/2” 14” 10-9/16” 18” 4-3/4” 16” 11-3/8” 21-1/4”
# OF SHELF ACCOMMODATES SHELVES DIAMETER INSIDE CABINET HEIGHT 2 18” 26”-31” 2 18” 26”-31” 2 24” 26”-31” 2 24” 26”-31” 2 28” 26”-31” 2 28” 26”-31” 2 32” 26”-31” 2 32” 26”-31”
KIDNEY
D 18” 24” 28” 32”
13/16” CL. (REF)
1/2” CL. (REF)
R
DIMENSIONS FOR FACE FRAME CABINET A FACE FRAME OF CABINET
3/4” (REF) B
A D
If using with face frame cabinet follow specs: “H” = Height, “L” = Spill Lip, “A” = Center of Rotation, “R” = Tray Radius, “B” = Cabinet Opening, “D” = Cabinet Depth.
VALUE LINE
ave money and maintain quality with our value line kidney shelf system. S • Features high performance polymer hubs and steel shafts with the twist and lock telescoping post. • Available in 2 shelf only in white or almond.
steel shaft
* All charts and specifications also apply to the value line.
PART # COLOR 3472-24-11-52 White 3472-24-15-52 Almond 3472-28-11-52 White 3472-28-15-52 Almond 3472-32-11-52 White 3472-32-15-52 Almond
# OF SHELVES 2 2 2 2 2 2
SHELF DIAMETER 24” 24” 28” 28” 32” 32”
ACCOMMODATES INSIDE CABINET HEIGHT 26”-31” 26”-31” 26”-31” 26”-31” 26”-31” 26”-31”
VALUE LINE FULL CIRCLE SHELF SETS, INDEPENDENTLY ROTATING • Save money and maintain quality with our Value Line full circle shelf system. • Features high performance polymer hubs and steel shafts with the twist and lock telescoping post. • Available in 2 or 3 shelves in either white or almond.
PART # COLOR 3072-18-11-52 White 3072-18-15-52 Almond 3072-20-11-52 White 3072-20-15-52 Almond 3072-28-11-52 White 3072-28-15-52 Almond 3073-18-11-531 White 3073-18-15-531 Almond 3073-18-11-536 White 3073-18-15-536 Almond
# OF SHELVES 2 2 2 2 2 2 3 3 3 3
SHELF DIA. 18” 18” 20” 20” 28” 28” 18” 18” 18” 18”
Contain: 3072- (2) shelves, telescoping shaft to accommodate 26” - 31” Inner Cabinet Height, mounting hardware-complete with screws. 3073-**-**-531-(3) shelves, telescoping shaft to accommodate 31” - 38” Inner Cabinet Height, mounting hardware-complete with screws. 3073-**-**-536-(3) shelves, telescoping shaft to accommodate 38” - 46” inner Cabinet Height, mounting hardware-complete with screws.
G-328
HALF MOON POLYMER LAZY SUSANS DOUBLE
• Available in a single and double shelf set. • Available in 3 minimum cabinet opening sizes: 13-1/4”, 16-1/8”, and 19-1/4”. • The half moon series includes standard framed and 90 degree hinge euro brackets. • Includes chrome-plated shaft and mounting brackets to help distribute the weight from the cabinet wall to the floor of the cabinet. • Includes color coated shelf supports to match the shelves and provide maximum deflection support. • Available in white and almond where noted.
SINGLE
SINGLE TRAY PIVOTS AND SLIDE
TWO SHELF SETS PIVOTS AND SLIDE
TWO SHELF SET (1) PIVOT AND (1) PIVOT & SLIDE
TWO SHELF SETS PIVOTS ONLY
PART # 6881-31-11-52 6881-31-15-52 6881-33-11-52 6881-33-15-52 6881-39-11-52 6881-39-15-52 6882-31-11-570 6882-31-15-570 6882-33-11-570 6882-33-15-570 6882-39-11-570 6882-39-15-570 6862-31-11-570 6862-31-15-570 6862-33-11-570 6862-33-15-570 6862-39-11-570 6862-39-15-570 6842-31-11-570 6842-31-15-570 6842-33-11-570 6842-33-15-570 6842-39-11-570 6842-39-15-570
FRAMED CABINET SPECIFICATIONS TRAY SIZE 31 33 39
A 33-11/16” 34-5/16” 40-11/16”
B 21-1/2” 18-9/16” 21-13/16”
C 13-1/4” 16-1/8” 19-1/4”
A
D 21-1/16” 24-1/16” 27-3/8”
FRAMELESS CABINET (EURO) SPECIFICATIONS TRAY SIZE 31 33 39
A 32-13/16” 33-3/16” 39-7/8”
ACCOMMODATES MINIMUM CABINET OPENING OF: 13-1/4” 13-1/4” 16-1/8” 16-1/8” 19-1/4” 19-1/4” 13-1/4” 13-1/4” 16-1/8” 16-1/8” 19-1/4” 19-1/4” 13-1/4” 13-1/4” 16-1/8” 16-1/8” 19-1/4” 19-1/4” 13-1/4” 13-1/4” 16-1/8” 16-1/8” 19-1/4” 19-1/4”
# OF TRAY COLOR SHELVES LENGTH White 1 31” Almond 1 31” White 1 33” Almond 1 33” White 1 39” Almond 1 39” White 2 31” Almond 2 31” White 2 33” Almond 2 33” White 2 39” Almond 2 39” White 2 31” Almond 2 31” White 2 33” Almond 2 33” White 2 39” Almond 2 39” White 2 31” Almond 2 31” White 2 33” Almond 2 33” White 2 39” Almond 2 39”
B C D 21-1/2” 15” 21-1/16” 18-9/16” 17-7/16” 24-1/16” 21-13/16” 20-3/4” 27-3/8”
Shelf Support (1)
Shelf Support (2)
Slide Assembly
Slide Assembly attached to Shelf Support
10-1/4
B D
STANDARD SHELF SUPPORT BRACKET
C
A
10-1/4
B
C
OFFSET SHELF SUPPORT BRACKET
D
G-329
FULL CIRCLE WOOD LAZY SUSANS All Wood Items Are Carb Phase II Compliant This “wood series features a durable 1” chrome plated diameter shaft system with independent rotating hardware and a telescoping shaft.
4WLS073-*-536 4WLS001-*-52
4BS-10-1
4B-10-1
ACCOMMODATES DIMENSIONS INSIDE CABINET HEIGHT DESCRIPTION PART # (IN DIAMETER) 4WLS001-18-52 18” Any SINGLE TRAY 4WLS001-20-52 20” Any NOT PRE-DRILLED 4WLS001-28-52 28” Any (NO HARDWARE) 4WLS001-32-52 32” Any 4WLS001-18-B52 18” Any SINGLE TRAY WITH 4WLS001-20-B52 20” Any SWIVEL & BEARING 4WLS001-28-B52 28” Any ATTACHED (NO SHAFT) 4WLS001-32-B52 32” Any 4WLS072-18-52 18” 26”-31” 4WLS072-20-52 20” 26”-31” 2 SHELF SET 4WLS072-28-52 28” 26”-31” 4WLS072-32-52 32” 26”-31” 4WLS073-18-536 18” 38”-46” 3 SHELF SET 4WLS073-20-536 20” 38”-46”
4WLS072-*-52
chrome hub
shaft
shelf
PART # DESCRIPTION 4B-7-1 7” dia. Bearing 4BS-7-1 7” dia. Bearing w/ Stop 4B-10-1 10” dia. Bearing 4BS-10-1 10” dia. Bearing w/ Stop
These durable wood shelves are made with a 5/8” thick high-density multi-ply tray & 1” high solid wood rim that’s protected with a UV-cured clear coat finish.
KIDNEY SHAPED WOOD SUSANS INDEPENDENTLY ROTATING SYSTEM
(SHELVES ROTATE INDEPENDENTLY OF EACH OTHER) • Our wood susans offer the beauty of Maple without the worries or warping and splitting. •O ur wood trays are made with a 5/8” thick high density multi-ply tray and a 1” high solid wood rim that’s protected with a UV cured clearcoat finish.
D
5” SHAFT
HAS METAL BALL BEARING SWIVEL ATTACHED (NOT SHOWN)
CHROME HUB
C
4WLS401-*-BS52 Not avail. in 24”
1” SHAFT
SHELF
4WLS421-*-52
4WLS472-*-52
Single Tray w/Swivel & Bearing attachment 2 Shelf set
G-330
PART # DIAMETER 4WLS401-28-BS52 28” 4WLS401-32-BS52 32” 4WLS472-24-52 24” 4WLS472-28-52 28” 4WLS472-32-52 32”
B
A
DIAMETER A B C D 24” 1-7/16” 2-1/2” 14-1/4” 23-15/16” 28” 2-7/8” 4-3/8” 18-1/4” 27-3/4” 32” 4-1/16” 6-1/16” 21-15/16” 31-3/4”
ACCOMMODATES INSIDE CABINET HEIGHT Any Any 26” - 31” 26” - 31” 26” - 31”
PIE CUT WOOD SUSANS All Wood Items Are Carb Phase II Compliant • Our Pie Cut Susans are now available in wood and made of 5/8” thick high-density multi-ply tray and 1” high solid wood rim.
D PIE CUT
• Available in a 2 shelf system. • Ideal for a corner base cabinet. • The 2 shelf set features a 1” diameter chrome shaft system and all hardware.
DIAMETER 24” 28” 31”
4WLS942-*-52
Two Shelf Set
A 1-3/8” 3” 4”
B C 1-15/16 13-15/16” 4-1/4” 18-1/4” 5-3/4” 21”
PART # 4WLS942-24P-52 4WLS942-28P-52 4WLS942-31P-52
D 24” 28” 32”
DIAMETER 24” 28” 31”
C
B
A
Z
Z 10-9/16” + 1/8” 10-11/16” + 1/8” 11-15/16 + 1/8”
ACCOMMODATES INSIDE CABINET HEIGHT 26” - 32” 26” - 32” 26” - 32”
HALF MOON WOOD SHELF SUSAN • The Half Moon Susan is now available and made of 5/8” thick high-density multi-ply tray and 1” high solid wood rim that’s protected with a UV-cured clearcoat finish.
SLIDE ASSEMBLY PRIOR TO SHELF BEING ATTACHED
• Available in a two shelf system only and in three tray lengths- (32”, 35” & 38”).
SHELF
• Ideal solution for a blind corner cabinet application.
• This system features a pivot and pull on both shelves and are adaptable to a left or right hand cabinet application.
SHELF SUPPORT
INCLUDED ACCESSORIES
PART # 4WLS882-32-570 4WLS882-35-570 4WLS882-38-570 SHELF SUPPORT
ACCOMMODATES MINIMUM CABINET DIAMETER OPENING OF: 32” 12” 35” 15” 38” 18”
SLIDE ASSEMBLIES
G-331
“D” SHAPED WOOD SUSANS All Wood Items Are Carb Phase II Compliant
INDEPENDENTLY ROTATING SHELVES (SHELVES TURN INDEPENDENTLY OF EACH OTHER)
• ”D” Shaped Susans give the maximum space utilization in diagonal and wall base cabinets. • Our “D” Shaped Wood shows off the beauty of maple without the worries of warping and splitting. • This durable wood shelf is made with 5/8” thick high density multi-ply tray and 1” high solid wood trim that is protected with a UV-cured clear coat finish. • Available in a single shelf w/ swivel and bearing stop, single shelf w/ positioner assembly and 5” shaft and 2 shelf w/ accommodating shaft. METAL BALLBEARING SWIVEL
4WL201-20-BS52
SINGLE TRAY NO SHAFT
D C B
Diameter 20” 31”
A
A 8 3/8” 14”
B 11” 12 7/8”
C 18 3/8” 29 1/2”
D 20” 31”
Single Shelf w/Shaft 4WLS221-*-52
Single Tray W/ Metal Ball Swivel Bearing attached (No shaft)
Part #
4WLS201-20-BS52
Accommodates Inside Cabinet Diameter Height 20”
Any
4WLS201-31-BS52
31”
Any
4WLS272-20-52
20”
26” - 31”
4WLS272-31-52
31”
26” - 31”
2 Shelf Set
Flexible Lazy Susan Moulding
308-1254-WH
1-1/2”
PVC Material 50’ Rolls Available in White S3 OR S9 SLOTTER
1.500
.125 .500
2 Shelf Set 4WLS272-*-52
G-332
8-010/5368/8-700 SERIES
BUILT-IN WASTE BINS
Ideal for keeping garbage out-of-sight. As the cabinet door opens, the lifting mechanism raises the lid enabling the container to pivot-out with the door. All pivot-outs feature an inner polymer container with built-in handle for easy removal. CONTAINS: Waste container with installation templates and fasteners. 8-010 Series
8-700411-20
PART # 8-700411-20 8-010212-14 8-010412-15
8-010314-15
COLOR
DESCRIPTION
White Polymer (Plastic) White Lacquered (Metal) White Lacquered (Metal)
20 Liter Sink Base Container 15 3/4” W x 7 1/4” D x 14”H 14 Liter Container 11” W x 10 1/2” D x 13 3/4” H 15 Liter Container 11-1/2” W x 11 1/2” D x 13 1/2” H 15 Liter Container 11” W x 10 1/2” D x 15 3/4” H 13 Liter Container 11 1/4” W x 11” D x 13 3/4” H
8-010314-15
Stainless Steel
5368-17-13
Silver (Plastic Polymer)
8-060 SERIES
5368-17-13
MINIMUM CABINET OPENING 16-1/4” 13-3/4” 14-3/4” 13-3/4” 14-1/4”
COUNTER MOUNT WASTE CONTAINER
Rev-A-Shelf presents another ultra modern innovation with the Counter Mount Waste Container. Ideal for medical offices, retail counters, recreational vehicles, upscale outdoor kitchens, and more; this waste management system sits inside the cabinet with full access to the container from the countertop. The 8-060 Series is available with an 11 or 13-liter removable container and features a stainless steel lid and soft rubber inner ring designed to seal odors. Open
Lid, Rubber Inner Ring & 11 or 13 Liter Container
PART # 8-060-11SS 8-060-15SS
Closed for clean neat look
DESCRIPTION 11 liter black container - with rubber ring and lid Dia.: 12-1/4”W x 11-5/8”D |15 liter black container - with rubber ring and lid Dia.: 12-1/4”W x 15-5/8”D
G-333
GALLEY RAIL P R O D U C T S
SMALL GALLEY RAIL
Available in Red Oak or Maple
POST: 1-1/4" High RAIL: 1/2" High x 3/4" Wide OVERALL HEIGHT: 2-1/4" POST SPACING: (center to center) 3"
PART # SPECIES LENGTH SGR8RO Red Oak 8 FT. SGR8MP Maple 8 FT.
SPINDLE RAIL
POST: 1-1/4" High RAIL: 1/2" High x 3/4" Wide OVERALL HEIGHT: 2-1/4" POST SPACING: (center to center) 4"
SPINDLE RAIL WITH LIP
POST: 1-1/4" High RAIL: 1/2" High x 3/4" Wide BASE: 3/4" High x 1" Wide OVERALL HEIGHT: 2-1/2" POST SPACING: (center to center) 4"
PART # SPECIES LENGTH BR8RO Red Oak 8 FT. BR8MP Maple 8 FT.
PART # SPECIES LENGTH BR18RO Red Oak 8 FT. BR18MP Maple 8 FT.
BEADED/FLUTED FILLER MOULDINGS & CAPS BEADED/FLUTED REVERSIBLE FILLER MOULDINGS
P R O D U C T S
• One moulding designed for either beaded or fluted applications. • Offered in a variety of unfinished wood species. • 2 Widths available. • 3/4" Thick. • Angled version available, please inquire. PART# BFF-396-RO BFF-396-MP BFF-396-CH BFF-696-RO BFF-696-MP BFF-696-CH
SIZE 3"W x 96"L 3"W x 96"L 3"W x 96"L 6"W x 96"L 6"W x 96"L 6"W x 96"L
CAPS
SPECIES Red Oak Maple Cherry Red Oak Maple Cherry
MOULDINGS
BEADED/FLUTED CAPS
• Works with our 3" or 6" reversible filler moulding. • Several styles available in a variety of wood species. • Other styles available, please inquire. 3x3 Acanthus Cap
Daisy Cap
6x6 Acanthus Cap
G-334
3x3 Rosette Cap
6x6 Rosette Cap
PART# BEADED BCAP-33R-RO BCAP-33R-MP BCAP-33R-CH BCAP-66R-RO BCAP-66R-MP BCAP-66R-CH BCAP-35D-RO BCAP-35D-MP BCAP-35D-CH BCAP-33A-RO BCAP-33A-MP BCAP-33A-CH BCAP-66A-RO BCAP-66A-MP BCAP-66A-CH
PART # FLUTED FCAP-33R-RO FCAP-33R-MP FCAP-33R-CH FCAP-66R-RO FCAP-66R-MP FCAP-66R-CH FCAP-35D-RO FCAP-35D-MP FCAP-35D-CH FCAP-33A-RO FCAP-33A-MP FCAP-33A-CH FCAP-66A-RO FCAP-66A-MP FCAP-66A-CH
DESCRIPTION 3" x 3" Rosette Cap 3" x 3" Rosette Cap 3" x 3" Rosette Cap 6" x 6" Rosette Cap 6" x 6" Rosette Cap 6" x 6" Rosette Cap 3" x 5-1/2" Daisy Cap 3" x 5-1/2" Daisy Cap 3" x 5-1/2" Daisy Cap 3" x 3" Acanthus Cap 3" x 3" Acanthus Cap 3" x 3" Acanthus Cap 6" x 6" Acanthus Cap 6" x 6" Acanthus Cap 6" x 6" Acanthus Cap
SPECIES Red Oak Maple Cherry Red Oak Maple Cherry Red Oak Maple Cherry Red Oak Maple Cherry Red Oak Maple Cherry
FUNCTIONAL TAMBOUR DOORS BAMBOO TAMBOUR DOORS P R O D U C T S
• • • • • •
Designed for functional tambour door applications. Carmelized bamboo bonded to 12 oz. poly/cloth backer. Simply stain or top coat for the Beauty of the Pacific rim. Nominal 36” W x 40” Slat Length. 1/8” thick. Works with our Track Systems A, P-Spiral, PT, LT, UT, T-48 & ST2.
PART #
See page 664 for Tambour Sheets
ECO2-TAM
PAINTABLE TAMBOUR SHEETS UNFINISHED HARDBOARD DOOR - NOMINAL 4’ x 8’ SHEETS 1/8” Unfinished Hardboard with Heavy Duty 7 oz. Duck Canvas Backing Works with our Track Systems P-Spiral, PT, LT, UT, T-48, & ST2. PART #
1267
7oz. BROWN DUCK CANVAS BACKING The same 7 oz. Duck Canvas Backing as used on our doors is offered to you by the square foot for your custom projects.
Canvas is available nominal 4.5 ft. wide. Actual width is approximately 52". Must be sold in increments of 9 square feet. PART #
CANVAS
G-335
APPLIANCE GARAGE DOOR KITS TAMBOUR “GARAGE” DOORS 400 SERIES
• Unfinished & ready to be stained. • May be used horizontally or vertically. • Extremely economical with two 1-1/2” leaders on the long side yields four to six doors. • Works with our Track Systems A, 855-856, FTT, P-Spiral, PT, LT, UT, T-48, & ST2. • Heavy duty 7 oz. Duck Canvas backing insures strength, stability & long life.
6’ SLAT LENGTHS FOR LARGER APPLICATIONS
AVAILABLE IN 6 WOOD VENEER FACINGS:
• Plain Sliced Red Oak • Plain Sliced Maple • Plain Sliced Cherry • “Uniform White Birch” • Hickory • Alder • Nominal 3’ x 4’
PART #
See page 664 for Tambour Sheets
412-RO 413-MP 415-CH 416-WB 417-HIC 418-AL
Same high quality construction series AVAILABLE IN 3 WOOD VENEER FACINGS:
• Plain Sliced Red Oak • “Uniform” White Birch
• Plain Sliced Maple • Nominal 40” x 72”
WOOD FACE
Red Oak Maple Cherry White Birch Hickory Alder
PART #
WOOD FACE
412-RO-6 Red Oak 413-MP-6 Maple 416-WB-6 White Birch
FROSTY WHITE TAMBOUR DOORS • • • •
1400 SERIES
Durable white-painted Euro-style tambour door for kitchen appliance garages, roll tops and more. Closely matches to Wilsonart’s #1573-60 Frosty White, with semi-gloss finish. White fabric backing. Works with our Track Systems A, 855-856, FTT, LT, UT, T-48, & ST2.
PART #
1400-WH
G-336
NOTE: Custom colors available with 15 piece orders. Call for special quote and lead time.
UNFINISHED SOLID WOOD TAMBOUR TAMBOUR “GARAGE” DOORS • Sanded & ready to be stained. • 7 oz. Brown Cloth Backer. • Works with our Track Systems A, 855-856, FTT, PT, LT, UT, T-48, ST2.
P R O D U C T S
3/4” CENTER SPACING, 60° GROOVE ANGLE, 3/16” THICK
PART #
1275-RO 1275-MP 1275-HIC 1275-CH 1275-AL 1275-WAL
See page 664 for Tambour Sheets
WOOD FACE
Red Oak Maple Hickory Cherry Alder Walnut
UNFINISHED SOLID WOOD TAMBOUR DOORS Solid Oak Doors with 7 oz. Heavy Duty Canvas Backing makes for an ideal door in custom & flagship projects.
1375A
5/16” THICK, 3/4” CENTER SPACING, 30° GROOVE ANGLE
• • • •
Heavy duty 7 oz. Duck Canvas Backing. Sanded & ready for staining. Works with our Track System B. Size is nominal.
1383
5/16” THICK, 3/4” HALF ROUND
PART #
PART #
1383-4 1383-4-MP 1383-4-CH 1383-5 1383-5-MP 1383-5-CH
1375A-4 1375A-5 • Maple & Cherry Available. Please Inquire.
FINISH
Oak Maple Cherry Oak Maple Cherry
VENEER TAMBOUR DOORS FOR LARGER APPLICATIONS
• • • •
We are is pleased to present the ‘ROLL TOP DESK DOOR’ This is a sectioned wood veneer door perfect for roll top desks or other expanded dimension uses.
3/4” slat width with 30° V-groove. Nominal 40” wide x 72” slat length. Two 1-1/2” leaders. Works with our Track Systems A, 855-856, FTT, LT, UT, T-48 & ST2. PART #
1577-RO 1577-CH 1577-MP
WOOD FACE
Red Oak Cherry Maple
G-337
TRACK SYSTEMS FOR TAMBOUR DOORS RECESSED MOUNT TRACK SYSTEM P R O D U C T S
Material: PVC, White or Brown
• Easy to cut desired lengths. • Track can be routed 3/8” deep x 9/16” wide groove or stapled directly to end panels. • All styles accept a maximum thickness of 7/32”.
UT-24
LT-22
Radius 1-3/4”
22”
Radius 1-3/4”
PT-24
3 3/8”
22”
10 1/8”
24”
T-48
10 1/4” 48”
PART #
Radius 1-1/2” 24”
Shown in White
APPLICATION HORIZONTAL OR VERTICAL
COLOR DESCRIPTION
Brown P Track White P Track Brown L Track White L Track Brown U Track White U Track Brown Straight Track White Straight Track
INTERCHANGEABLE TRACK AND CURVES (Check Your Door Thickness For Proper Track System)
SYSTEM “A”
PLASTIC TRACK *-AVAILABLE IN 4 FT. OR 8 FT. LENGTHS SYSTEM A...4T5C SYSTEM B...4T54
SYSTEM “A” DESCRIPTION
4C51-BR Brown tambour track curve for 1/8”-3/16” thick doors 4C51-BK Black tambour track curve for 1/8”-3/16” thick doors 4T5C-BR-* Brown tambour door track for 1/8”-3/16” thick doors 4T5C-BK-* Black tambour door track for 1/8”-3/16” thick doors
P-SPIRAL PLASTIC TAMBOUR TRACK FOR 3/16” DOOR THICKNESS
(Check Your Door Thickness For Proper Track System) FOR VERTICAL USE ONLY • Horizontal System will accept up to 21” of tambour length. • Doors should be cut 1/16”-1/8” less than distance between tracks. • Plastic spirals require approximately a 4-5/8” square area for mounting. • The track requires approximately 1” width for mounting. • Sold in pairs only, consisting of a right & left side. • Available in Brown. PART #
INSTALLATION
CURVE SYSTEM A...4C51 SYSTEM B...4C55
For Door Thickness 1/8”-3/16” Stocked in Brown or Black
COLOR
P-187-BR Brown
P-187 WORKS BEST WITH OUR 400 & 700 TAMBOUR SERIES
G-338
PT-24-BR PT-24-WH LT-22-BR LT-22-WH UT-24-BR UT-24-WH T-48-BR T-48-WH
PLASTIC TAMBOUR TRACK
See page 664 for Tambour Sheets
PART #
TRACK PROFILE
PART #
SYSTEM “B”
For Door Thickness 1/4”-5/16” Brown Only SYSTEM “B” DESCRIPTION
4C55-BR Brown tambour track curve for 1/4”-5/16” thick doors 4T54-BR-* Brown tambour door track for 1/4”-5/16” thick doors
ROLL TOP DESK TRACK FOR 1/4” DOOR THICKNESS
(Check Your Door Thickness For Proper Track System)
Dark Brown Only
PART #
855-856
FLEXIBLE TAMBOUR TRACK
FOR 1/4” DOOR THICKNESS • 8 FT. LONG
(Check Your Door Thickness For Proper Track System)
PART #
FTT-BK FTT-WH
COLOR
Black White
APPLIANCE GARAGE DOOR KITS CORNER UNIT
STRAIGHT UNIT
Appliance garage with solid wood tambour door mounted to solid wood face frame. End panels are veneer faced and backed on 3/8” MDF, using plain sliced veneer. Doweled joints; spring tension track system; smooth, nonbinding operation. Available in Red Oak, Cherry, Maple or Alder. 17” W x 18-1/2” H x 11-7/8” D. Fits standard 24” corner.
Appliance garage with solid wood tambour door mounted to solid wood face frame. End panels are veneer faced and backed on 3/8” MDF, using plain sliced veneer. Doweled joints; spring tension track system; smooth, nonbinding operation. Available in Red Oak,Cherry, Alder or Maple. 24” W x 18-1/2” H x 11-7/8” D.
P R O D U C T S
PART #
FINISH
AG-100-C-RO Red Oak AG-100-C-CH Cherry AG-100-C-MP Maple AG-100-C-AL Alder
PART #
FINISH
AG-100-S-RO Red Oak AG-100-S-CH Cherry AG-100-S-MP Maple AG-100-S-AL Alder
Above styles are available in White on a custom order basis - please inquire.
DOOR AND TRACK COMBO KITS
Set includes quality tambour door with handpull and spring tension track system packed together. 1275 series solid tambour door and ST-2 series spring tension track in Almond. Also available with 400 series wood veneer door, please inquire. Door W: 15” or 24” x H 18”. Track H: 17-1/2”. • Make your own appliance garage using these combo kits. SOLID WOOD DOOR SETS PART #
FINISH
SIZE
C2-1518S-RO Red Oak 15” x 18” C2-1518S-MP Maple 15” x 18” C2-1518S-CH Cherry 15” x 18” C2-2418S-RO Red Oak 24” x 18” C2-2418S-MP Maple 24” x 18” C2-2418S-CH Cherry 24” x 18”
See page 664 for Tambour Sheets
* ST-3- series track available for frameless cabinets - please inquire. * White track available - please inquire.
SPRING TENSION TRACK KITS Size: Designed for doors 19” High x .220 Thickness Material: PVC ST2 FACE FRAME MOUNT ST3 EURO STYLE FRAMELESS MOUNT APPLICATION:
• Kit includes plastic guide rails which can be stapled or screwed to face frame.
PART #
ST2-16-WH ST2-16-AL ST2-24-WH ST2-24-AL ST2-30-WH ST2-30-AL ST2-36-WH ST2-36-AL
COLOR
White Almond White Almond White Almond White Almond
• Kit includes plastic guide rails which are recessed or flush mounted to end panels of frameless cabinet. APPLICATION:
DOWEL WIDTH
16” 16” 24” 24” 30” 30” 36” 36”
PART #
ST3-30-AL ST3-36-AL
COLOR
Almond Almond
DOWEL WIDTH
30” 36”
G-339
JEWELRY-CLOSET™ CABINET Is your jewelry organized??
PRODUCT FEATURES:
• Organizes jewelry- holds 36+ necklaces, 72+pair earrings & 40+ rings. • Provides full length mirror. • Easy to install - surface mount install is with 2 sheet rock screws & anchors recess mount install is between 16” OC studs with 2 - 1-1/2” long screws (recesses 2-1/4” into wall). • Cabinet size 14-1/4” W x 48”L x 4”D. • Available with standard touch latch or magnetic lock. • Available in medium oak, burgundy cherry, natural maple & white to match any decor. • Forest Green fabric interior.
Medium Oak
Burgundy Cherry PART # JC-103S-MO-* JC-103S-BC-* JC-103S-NM-* JC-103S-WH-* JC-103R-MO-* JC-103R-BC-* JC-103R-NM-* JC-103R-WH-*
Natural Maple
MOUNTING Surface Surface Surface Surface Recessed Recessed Recessed Recessed
White
FINISH Medium Oak Burgundy Cherry Natural Maple White Medium Oak Burgundy Cherry Natural Maple White
*Please add appropriate code at the end of the part number (example: JC-103S-MO-T)
CLOSET SAFE PRODUCT FEATURES:
• Motion detector light turns on when safe is opened and turns of when safe is closed. • 50% Larger than any competitive unit. Overall Size: 17” wide x 27” high. Inside Dimensions: 13-1/2” wide x 24” high x 6-3/4” deep. • 5 Transparent fully adjustable shelves adjustable every 32MM. Earring and ring holders for maximum organization • White powder coating outside to match closet walls. White powder coating inside to reflect light. No flocking to rub off on jewelry. • High security lock with six digit touch pad. • Securely mounts between the studs with 6 bolts. • Combination can be changed, instructions included. PART # SAFE-1727-WH
G-340
“CREATE - A - CLOSET”...AND MORE! CLOSET, PANTRY AND GARAGE SOLUTIONS SHELF SUPPORT AND FINISHING CAP • ABS • Works with standard 5/8” or 3/4” shelves x 12”, 14” & 16” depths • Designed to support 300 lbs. when installed with anchor & pin system (part#: VG-700-805B), no stud location required • Optional finishing cap is available to provide a professional finish where the melamine or wood shelf meets the wall
Finishing Cap
Shelf Support
VG-700-628
PART #
ANCHOR & PIN SYSTEM VG-700-805B (WHITE)
CARTON: 500 sets
Also available in Chocolate Pearwood (CP)
VG-700-629
VG-700-629-12VG-700-628A-12VG-700-628C-12VG-700-629-14VG-700-628-14VG-700-631-16VG-700-628B-16VG-700-628D-16-
DESCRIPTION
Shelf Support 5/8” Finishing Cap 3/4” Finishing Cap Shelf Support 3/4” Finishing Cap Shelf Support 5/8” Finishing Cap 3/4” Finishing Cap
SIZE
12” 14” 16”
COLOR
CARTON QTY.
50 pairs 40 pieces (WH) White 20 pieces 50 pairs (CP) Chocolate 20 pieces Pearwood 50 pairs 40 pieces 20 pieces
ECONOMY SHELF SUPPORT • ABS • Designed to provide a shelf support for lighter load applications • Simply install directly into drywall or wood anchors
Shown in Almond (AL)
PART #
DESCRIPTION
COLOR
CARTON QTY.
(WH) White (CP) Chocolate Pearwood Economy (AL) Almond 250 VG-700-639BShelf Support (BR) Cherry Brown pieces (TN) Tan (BK) Black VG-700-805B Anchor & Pin System White 500 sets
CLOSET ROD SOCKETS
White Almond Chocolate Pearwood
AVAILABLE IN THE FOLLOWING COLORS
PART #
VG-140-0116-
• ABS • Available with 5mm pegs, (Inquire for sockets without pegs) • Supports closet rods up to 1-3/8” diameter • 32mm compatible
COLOR
(WH) White (AL) Almond (CP) Chocolate Pearwood
White Almond Tan Cherry Brown Chocolate Pearwood
AVAILABLE IN THE FOLLOWING COLORS
Black
INSTALLATION JIG FOR ALL SHELF SUPPORTS Quick & easy installation with the Vanguard shelving jig VG-600-JIG
CARTON QTY.
100 pairs
G-341
“CREATE - A - CLOSET”...AND MORE! CLOSET, PANTRY AND GARAGE SOLUTIONS SHELF CENTER SUPPORTS • ABS • Use with 12”, 14” and 16” deep shelves • Designed to support 150 lbs. when back plate is installed directly into a stud - REQUIRED • Unique back plate conceals all screws • Recommended spacing of every 36” to 48”, as long as mounted to a stud
BACK PLATE TO CONCEAL SCREWS
VG-700-634C CONTEMPORARY DESIGN
VG-700-634 CROSS HATCHED DESIGN
(Shown in Chocolate Pearwood)
(Shown in White)
PART #
VG-700-634VG-700-634C-
STYLE
Cross Hatch Contemporary
COLOR
(WH) White (CP) Chocolate Pearwood
CARTON QTY.
20 pieces
SHELF & ROD CENTER SUPPORTS BACK PLATE TO CONCEAL SCREWS
VG-700-633 CROSS HATCHED DESIGN
VG-700-633C CONTEMPORARY DESIGN
(Shown in White)
(Shown in Chocolate Pearwood) PART #
VG-700-633VG-700-633C-
STYLE
Cross Hatch Contemporary
• ABS • Use with 1-5/16” wood closet rod • Use with 12”, 14” and 16” deep shelves • Designed to support 150 lbs. when back plate is installed directly into a stud - REQUIRED • Unique back plate conceals all screws • Recommended spacing of every 36” to 48”, as long as mounted to a stud
COLOR
(WH) White (CP) Chocolate Pearwood
CARTON QTY.
20 pieces
ROD & SHELF SUPPORTS
• ABS
• Use with 1-5/16” wood closet rod
• Works with standard 5/8” or 3/4” shelves x 12”, 14” & 16” depths
VG-700-630-12
• Designed to support 300 lbs. when installed with anchor & pin system (VG-700-805B), no stud location required
G-342
VG-700-630-14 PART #
VG-700-630-16 DESCRIPTION
COLOR
VG-700-630-12- 12” Deep Shelf Supports (WH) White VG-700-630-14- 14” Deep Shelf Supports (CP) Chocolate Pearwood VG-700-630-16- 16” Deep Shelf Supports
CARTON QTY.
ANCHOR & PIN SYSTEM VG-700-805B (WHITE) CARTON: 500 sets
25 pairs
“CREATE - A - CLOSET”...AND MORE! CLOSET, PANTRY AND GARAGE SOLUTIONS
...CLOSETS
...GARAGES ...PANTRIES
HEMLOCK CLOSET ROD & END CAPS
1-5/16” Diameter Wood Closet Rod w/Plastic Cover • 96” Long • Hemlock Wood • Seamless, scratch resistant and non-marring polyethylene cover • Finger jointed; thus no bowing, shrinking or expansion of wood • Optional end caps available PART #
OPTIONAL END CAPS VG-700-627-*
WHITE (*WH)
ALMOND (*AL)
CHOCOLATE PEARWOOD (*CP)
• 3/4” and 5/8” shelves • ABS and Polystyrene • Field trimmable, nominal 14” & 16” lengths • Effectively joins two shelf panels for corner and straight applications
DESCRIPTION
VG-700-641C-WH White Closet Rod VG-700-641C-AL Almond Closet Rod VG-700-641C-CP Chocolate Pearwood Closet Rod VG-700-627-WH White End Cap VG-700-627-AL Almond End Cap VG-700-627-CP Chocolate Pearwood End Cap
SHELF JOINER Almond
Tan
CARTON QTY.
Cherry Brown
18 pieces 100 pieces
Chocolate Pearwood
White
Black
VG-700-637 PART #
DESCRIPTION
VG-700-637-
3/4” x Nominal 16” Deep
COLOR
(WH) White (CP) Chocolate Pearwood (AL) Almond VG-700-635- 5/8” x Nominal 16” Deep (BR) Cherry Brown (TN) Tan VG-700-637A- 3/4” x Nominal 14” Deep (BK) Black
CARTON QTY.
100 pieces
AVAILABLE IN THE FOLLOWING COLORS
G-343
GARAGE ORGANIZATION SUPER BINS
All Accessories You Need To Get Organized!
A
B
PART #
A GRD-9TLT-TN Part #- GRD-MT-BK Description- Black Mounting Clip-- Set of 2 CTN QTY- 25
B
GRD-6TLT-TN
C
GRD-5TLT-TN
D
GRD-4TLT-TN
C
DESCRIPTION
Plastic Tan 9 Tilt Bin Storage Unit 23 1/2”-W x 3”-H x 2”-D Plastic Tan 6 Tilt Bin Storage Unit 23 1/2”-W x 4 1/2”-H x 3”-D Plastic Tan 5 Tilt Bin Storage Unit 23 1/2”-W x 6 1/2”-H x 4 1/2”-D Plastic Tan 4 Tilt Bin Storage Unit 23 1/2”-W x 8”-H x 5 1/2”-D
D
CTN QTY 12 12 6 6
METAL UTILITY BASKETS WORKS With E-Z Slatwall & GREAT WALL
12” x 6” x 6”
12” x 12” x 4”
GRD-U1266-BK...(Black) GRD-U1266-WH...(White) Carton Quantity: 6
GRD-U12124-BK...(Black) GRD-U12124-WH...(White) Carton Quantity: 6
12” x 12” x 8”
GRD-U12128-BK...(Black) GRD-U12128-WH...(White) Carton Quantity: 6
24” x 12” x 4”
GRD-U12244-BK...(Black) GRD-U12244-WH...(White) Carton Quantity: 6
ALUMINUM “NO BOW” SHELF CHANNEL For 1/2”, 5/8”, & 3/4” Shelves 8 Ft. Lengths LEVEL LINE
13/16” 1/8”
3/4”
3/4”
WITH “NO BOW” CHANNEL
BOWED SHELF
• Clear Anodized *(S) • Black Powder Coat *(BK) • White Powder Coat *(W) PART #
SHF-A500-* SHF-A625-* SHF-A750-*
SHELF WIDTH
1/2” 5/8” 3/4”
ALUMINUM SHELF SUPPORT BRACKET Aluminum Slatwall Shelf Bracket
AVAILABLE IN 1', 2', 4’ OR 8' LENGTHSº Made of Clear Anodized Aluminum SHELF BRACKETS
1/4” or 3/4”
SLATWALL
EASY AS: 1 - PICK SHELF LENGTH 2 - I NSERT SHELF INTO EXTRUSION 3 - HANG ON SLATWALL
G-344
12” Max.
HOLDS UP TO 12" D SHELF x 1/4" OR 3/4" THICK (SCREWS INCLUDED FOR 3/4" THICK ONLY)
SHELF
PART # LENGTH
1/4” 51790-1 THICK 51790-2 SHELF 51790-4 PART #
41790-1 3/4” 41790-2 THICK 41790-4 SHELF 41790-8
ºThe length of the bracket is 1/4” less thAn the suggested shelf length
1’ 2’ 4’
LENGTH
1’ 2’ 4’ 8’
GARAGE ORGANIZATION SPECIALTY HOOKS, SUPER BASKETS, & SUPER SHELF All Accessories You Need To Get Organized!
Part #- GRD-GLF-BK Description- Charcoal Golf Accessory Rack With Basket CTN QTY- 4
Part #- GRD-HHD-TN Description- Tan Plastic Garden Hose Holder (Holds Up To 150’ Of Hose & Needs Mounting Clips) CTN QTY- 4
Part #- GRD-SKTR-BK Description- Metal Skate Rack With Basket CTN QTY- 4
Part #- GRD-24TL-BK Description- Black 24” Magnetic Tool Bar (Needs Mounting Clips) CTN QTY- 1
Part #- GRD-13TL-BK Description- Black 13” Magnetic Tool Bar (Needs Mounting Clips) CTN QTY- 1
Part #- GRD-TOOL-BK Description- Charcoal Metal Tool Rack CTN QTY-4
Part #- GRD-B16114-BK Description- Small Metal Basket 16” x 11-1/2” x 4” CTN QTY- 4
Part #- GRD-B16118-BK Description- Large Metal Basket 16” x 11-1/2” x 8” CTN QTY- 4
Part #- GRD-S2007-BK Description- Charcoal 20” X 7” Shelf With 2 Hooks CTN QTY- 4
G-345
GARAGE ORGANIZATION SPECIALTY HOOKS & RACKS
All Accessories You Need To Get Organized!
Part #- GRD-TB-BK Description- Charcoal Metal Long Tool Bar With PVC Coating CTN QTY- 4
Part #- GRD-GDN-BK Description- Charcoal Metal Garden Rack With Basket CTN QTY- 6
Part #- GRD-SPRP-TN Description- Tan Plastic Sports Rack (Needs Mounting Clips) CTN QTY- 1
Part #- GRD-5BH-BK Description- Charcoal 5� Metal Bike Hook With PVC Coating CTN QTY- 6
Part #- GRD-SPOR-BK Description- Charcoal Metal Sports Accessory Rack CTN QTY- 4
Part #- GRD-FHH-BK Description- Charcoal Metal Fishing Rod Holder With Rubberized Grip (Holds 4 Fishing Rods) CTN QTY- 4
Part #- GRD-HBKR-BK Description- Charcoal Metal Horizontal Bike Rack CTN QTY- 4
Part #- GRD-SKR-BK Description- Charcoal Metal Ski Rack CTN QTY- 6
Part #- GRD-TNH-BK Description- Charcoal Metal Tennis Accessory Holder With Rubberized Sleeve CTN QTY- 4
G-346
GARAGE ORGANIZATION IT’S A SNAP WITH SUPER HOOKS
All Accessories You Need To Get Organized! PRODUCT FEATURES: • Strong & durable with positive locking action. • Works with most 3” on center slatwall. • Charcoal gray with pvc coating.
Part #- GRD-H4L-BK Description- Charcoal 10” Metal Hook Loop With PVC Coating CTN QTY- 6
Part #- GRD-H8SD-BK Description- Charcoal 8” Metal Double Hook With PVC Coating CTN QTY- 6
Part #- GRD-H4SD-BK Description- Charcoal 4” Metal Double Hook With PVC Coating CTN QTY- 6
Part #- GRD-J6-BK Description- Charcoal Large Metal “J” Hook With PVC Coating CTN QTY- 6
Part #- GRD-SHK-BK Description- Charcoal Metal “S” Hook With PVC Coating CTN QTY- 6
Part #- GRD-J-BK Description- Charcoal Small Metal “J” Hook With PVC Coating CTN QTY- 6
G-347
GARAGE ORGANIZATION STANDARD DUTY HOOKS
All Accessories You Need To Get Organized! PART # GRD-PSD-2BK GRD-PSD-2FG GRD-PSD-2WH GRD-PSD-4BK GRD-PSD-4FG GRD-PSD-4WH
PART # GRD-SD-1BC GRD-SD-4BC
DESCRIPTION Brite Chrome 1” Metal Slatwall Hook Brite Chrome 4” Metal Slatwall Hook
PART # GRD-SD-HF
PART # GRD-H5-BC GRD-H5-BK GRD-H5-WH
DESCRIPTION Black 2” Plastic Slatwall Hook Fog Gray 2” Plastic Slatwall Hook White 2” Plastic Slatwall Hook Black 4” Plastic Slatwall Hook Fog Gray 4” Plastic Slatwall Hook White 4” Plastic Slatwall Hook
CTN QTY 12 12
DESCRIPTION Brite Chrome Flush Metal Slatwall Hook
DESCRIPTION Brite Chrome 5 Hook Metal Bracket Black 5 Hook Metal Bracket White 5 Hook Metal Bracket
CTN QTY 12 12 12 12 12 12
CTN QTY 12
CTN QTY 3 3 3
* Not Recommended For Use On Standard Duty Great Wall.
PART # GRD-KB-8BC GRD-KB-8BK GRD-KB-8WH GRD-KB-10BC GRD-KB-10BK GRD-KB-10WH GRD-KB-12BC GRD-KB-12BK GRD-KB-12WH
PART # GRD-EA-S
G-348
DESCRIPTION CTN QTY Brite Chrome 8” Metal Knife Bracket 6 Black 8” Metal Knife Bracket 6 White 8” Metal Knife Bracket 6 Brite Chrome 10” Metal Knife Bracket 6 Black 10” Metal Knife Bracket 6 White 10” Metal Knife Bracket 6 Brite Chrome 12” Metal Knife Bracket 6 Black 12” Metal Knife Bracket 6 White 12” Metal Knife Bracket 6
DESCRIPTION Support Arm For Metal Knife Bracket
CTN QTY 4
GREAT WALL SLATWALL SYSTEM Material: PVC
Panel Sizes: 1’ x 4’ or 1’ x 8’ 3” on center 11/16” Thick Panel Great Wall Panels Product Features
Almond
Maple Wood Grain
White
Black
Standard Duty- 25 Lbs per Sq. Ft. Load Capacity PART # GRW-1X4-WH GRW-1X4-BK GRW-1X4-AL GRW-1X4-MP GRW-1X8-WH GRW-1X8-BK GRW-1X8-AL GRW-1X8-MP
PANELS
DESCRIPTION 1’ x 4’ White Great Wall Panel 1’ x 4’ Black Great Wall Panel 1’ x 4’ Almond Great Wall Panel 1’ x 4’ Maple Great Wall Panel 1’ x 8’ White Great Wall Panel 1’ x 8’ Black Great Wall Panel 1’ x 8’ Almond Great Wall Panel 1’ x 8’ Maple Great Wall Panel
* Must be ordered in full boxes of 8 pcs. x 4 ft. or 4pcs. x 8 ft. PART # GRW-JNR8-WH GRW-JNR8-BK GRW-JNR8-AL GRW-JNR8-MP GRW-END8-WH GRW-END8-BK GRW-END8-AL GRW-END8-MP
PART # GRW-2500SCR-WH GRW-2500SCR-BK GRW-2500SCR-AL GRW-2500SCR-MP
MOULDINGS
DESCRIPTION 8’ White Joint Trim For Great Wall 8’ Black Joint Trim For Great Wall 8’ Almond Joint Trim For Great Wall 8’ Maple Joint Trim For Great Wall 8’ White End Cap For Great Wall 8’ Black End Cap For Great Wall 8’ Almond End Cap For Great Wall 8’ Maple End Cap For Great Wall
SCREWS
DESCRIPTION 2-1/2”-L White Screw For Great Wall 2-1/2”-L Black Screw For Great Wall 2-1/2”-L Almond Screw For Great Wall 2-1/2”-L Maple Screw For Great Wall
* Screws packed 100 pcs. per box
11/16”
• Strong & Durable. • Easy to install with seamless construction. • Color matching screws & mouldings available.
UNIQUE INTERLOCKING DESIGN
Heavy Duty- 100 Lbs per Sq. Ft. Load Capacity PANELS
PART # GRW-HD1X4-WH GRW-HD1X4-BK GRW-HD1X4-AL GRW-HD1X4-MP GRW-HD1X8-WH GRW-HD1X8-BK GRW-HD1X8-AL GRW-HD1X8-MP
DESCRIPTION 1’ x 4’ White Great Wall Panel 1’ x 4’ Black Great Wall Panel 1’ x 4’ Almond Great Wall Panel 1’ x 4’ Maple Great Wall Panel 1’ x 8’ White Great Wall Panel 1’ x 8’ Black Great Wall Panel 1’ x 8’ Almond Great Wall Panel 1’ x 8’ Maple Great Wall Panel
* Must be ordered in full carton of 8 pcs. x 4 ft. or 4pcs. x 8 ft.
Joint Trim
Mouldings
1.06”
End Cap .67”
.67”
.83”
.06” 1.38”
.79”
.63”
.89”
Also See Our Aluminum and ABS Slatwall See Pgs. 142-144
Dealer Program & Volume Discounts Available, Please Inquire.
G-349
WOOD & ACRYLIC SHELF STORAGE Acrylic shelf storage Create your own custom storage with Rev-A-Shelf’s CSPD Series Acrylic Shelf Organizers. Two sizes, 166mm and 358mm, enables installation between shelves utilizing 32mm system holes. Four Clips included with every divider
PART # CSPD-6 CSPD-14
DESCRIPTION DIMENSIONS Small Divider 13-1/2” D x 6-9/16” T w/Clips x 1/4” Thick Large Divider 13-1/2” D x14-1/8 T w/Clips x 1/4” Thick
CHROME SHOE RAILS Adding functionality to your closet does not have to be complicated. This simple Shoe Rail System is easy to install and features Heavy-Gauge Chrome Rails. It is available in four different lengths, from 17” to 35”. PART # CSR-17CR-10 CSR-23CR-10 CSR-29CR-10 CSR-35CR-10
DESCRIPTION 17” Wire Shoe Rail 23” Wire Shoe Rail 29” Wire Shoe Rail 35” Wire Shoe Rail
DIMENSIONS 17” L x 2-1/4” H 23” L x 2-1/4” H 29” L x 2-1/4” H 35” L x 2-1/4” H
JEWELRY DRAWER Keep your jewelry organized and in meticulous condition with the CJD Series jewelry drawer. The CJD-2414 system is easily installed with system holes and features full-extension ball bearing slides, and drawer head mounting capability. Used in coordination with the CJD-IS (Standard) and CJD-IN (Necklace) inserts customizing and care has never been easier. These unique insert designs give you the ability to store larger items like necklaces without tangling and the curved inside radius allows for full accessibility to small items such as earring backs. The CJD-IS and CJD-IN feature easy “drop-in” installation and a soft, velvet flocked covering that protects while providing a stylish background for your precious jewelry.
PART # DESCRIPTION DIMENSIONS CJD-2414 Drawer Box w/Slides 24” W x 14-3/4” D x 2-1/4” H CJD-24IS Jewelry Insert 22” W x 13” D x 1-1/2” H CJD-24IN Necklace Insert 22” W x 13” D x 1-1/2” H CJD-DMB-KIT Door Mount Kit –
G-350
FINISH Black Velvet Velvet Black
WIRE HAMPER, ACCESSORIES, TIE RACK Double wire hamper The CH-241419-DM-2 Premiere Closet Hamper is 24” W by 19” T and built using the same quality material as their immensely popular 5349 Series waste containers. It features removable double wire baskets, with 2.5 Bushels Capacity, 14” bottom mounted, full-extension slides, SOFT-CLOSE mechanism and is door mountable. Part # CH-241419-DM-2 5CHB-LINER
DIMENSIONS 24” W x 19” T x 14” D Cloth Liner
tie rack
5CHB-LINER
CH-241419-DM-2
Tie & Belt Rack
TRC-14CR
Chrome Finish 3” W x 14” D x 2” H
The Closet essential for all men, Rev-A-Shelf’s Chrome Tie/Belt rack is the obvious choice for keeping up with the important odds and ends. This all-in-one organizer features chrome pegs for up to 20 ties, five belts, four peg-closure beltsand a spacious tray for storing loose items like your wallet, change, watch, jewelry, etc. The TBC Series conveniently pulls out of the closet for easy access on full-extension slides and can be mounted on either the left or right side.
TBC-14TCR
Chrome Finish 6”W x 14”D x 5”H
reverse mounting bracket The Reverse Mounting Bracket is one of Rev-A-Shelf’s most versatile creations! Designed so you can utilize the unused space between the wall and the end of the run. The CRMB-12 works with the TRC Series tie rack or most other brands of tie/belt racks. has a 35% restock fee.
CRMB-12CR-5
Chrome Finish
3-3/4”W x 11”D
OPI INTRODUCES “EASY DOES IT” TIE RACK LOCK BUTTON
ALSO AVAILABLE IN CHOCOLATE PEARWOOD
• Economical plastic screw mount tie rack • H olds up to 16 ties SIMPLY PRESS •S tay organized! Ties IN LEVER TO ADD OR remain in place until lever REMOVE TIE is pressed
N EW
!
Part # COLOR TRC-EDI-BK Black TRC-EDI-WH White TRC-EDI-CP Chocolate Pearwood SHOWN IN BLACK
G-351
TIE, BELT & PANTS RACKS All Wood Items Are Carb Phase II Compliant.
Tie & Belt Rack
The Closet essential for all men, Rev-A-Shelf’s Chrome Tie/Belt rack is the obvious choice for keeping up with the important odds and ends. This all-in-one organizer features chrome pegs for up to 20 ties, five belts, four peg-closure belts and a spacious tray for storing loose items like your wallet, change, watch, jewelry, etc. The TBC Series conveniently pulls out of the closet for easy access on full-extension slides and can be mounted on either the left or right side. Part # DIMENSIONS FINISH TBC-14TCR 6” W x 14” D x 5” H Chrome
Wood pant & tie Rack
Rev-A-Shelf is pleased to introduce its innovative Wood Pant & Tie Racks. With three variations, the CWPR comes in a 24” or 30” width and provides space for up to eighteen standard or twelve Big & Tall pants. The CWTR tie rack can hold over 120 ties and the CWPTR features both a pant and tie rack that holds twelve pants and over thirty ties. These patent-pending pullout racks feature full-extension slides, rubber O-Rings to prevent slipping and removable pant rods for ease use. The three variations are made from solid birch-maple and come with a lifetime warranty. Whether you are designing a custom closet or want a custom look, the CWTR provides you with both storage and style. FINISH AVAILABLE IN WOOD
Part # DESCRIPTION CWTR-2414-1 24” Tie Rack 24” Pant Rack CWPR-2414-1 CWPR-3014-1 30” Pant Rack CWPTR-3014-1 30” Pant & Tie Rack
DIMENSIONS 24” W x 14” D x 6” H 24” W x 14” D x 6” H 30” W x 14” D x 6” H 30” W x 14” D x 6” H
pull out pants Rack
Keep your closet manageable and chaos free with Rev-A-Shelf’s Chrome Pull-Out Pants rack. This exceptional closet solution is made of heavy gauge steel with a chrome finish and features distinctive movable fingers for easy access and unparalleled convenience. The PSC Series is available in an 18” width holding 9 pairs of pants and a 24” width holding up to 13 pairs of pants. FINISH AVAILABLE IN CHROME Part # DESCRIPTION DIMENSIONS PSC-1814CR 9 Pant Capacity 17-1/2 -18-1/8” W x 14” D x 3” H PSC-2414CR 13 Pant Capacity 23-3/4” - 24-1/2” W x 14” D x 3” H
pull out Fan pants Rack Rev-A-Shelf’s re-designed Pull-Out Fan Pants Rack features left or right-handed mounting, which is extremely simple using closet system holes; chrome finish and unique details like rubber rings to keep pants from slipping and smooth ends to prevent snagging. Part # DESCRIPTION DIMENSIONS FINISH CPRF-16CR-52 Fan Pants Rack See Diagram Chrome
G-352
WIRE BASKETS Rev-A-Shelf introduces a breakthrough in design of Closet wire baskets and hampers. Not only did they give the baskets sleek lines, they also engineered them to perform better than any other basket on the market. Their new patent-pending design installs easily in 32mm applications, and basket removal and re-installation has never been easier. Unlike other baskets on the market, their baskets rest on top of the slides, eliminating the torque twist that is common in other designs. Combine that with the bayonet mounting system and your can see why Rev-A-Shelf is the leader in new product innovation.
Close-ups are shown in Chrome (CR) and Oil Rubbed Bronze (ORB) Part # CB-181407**-2 CB-181411**-2 CB-181418**-2 CB-241407**-2 pull-out CB-241411**-2 baskets CB-241418**-2 - 14” deep CB-301407**-2 CB-301411**-2 CB-301418**-2 CB-181607**-2 CB-181611**-2 CB-181618**-2 pull-out CB-241607**-2 baskets CB-241611**-2 CB-241618**-2 - 16” deep CB-301607**-2 CB-301611**-2 CB-301618**-2 CB-182011**-2 pull-out CB-182018**-2 baskets CB-242011**-2 - 20” deep CB-242018**-2
Dimensions 18” W x 14” D x 7” H 18” W x 14” D x 11” H 18” W x 14” D x 18” H 24” W x 14” D x 7” H 24” W x 14” D x 11” H 24” W x 14” D x 18” H 30” W x 14” D x 7” H 30” W x 14” D x 11” H 30” W x 14” D x 18” H 18” W x 16” D x 7” H 18” W x 16” D x 11” H 18” W x 16” D x 18” H 24” W x 16” D x 7” H 24” W x 16” D x 11” H 24” W x 16” D x 18” H 30” W x 16” D x 7” H 30” W x 16” D x 11” H 30” W x 16” D x 18” H 18” W x 20” D x 11” H 18” W x 20” D x 18” H 24” W x 20” D x 11” H 24” W x 20” D x 18” H
** Finishes available: Chrome (CR), Satin Nickel (SN) or Oil Rubbed Bronze
FINISH AVAILABLE IN CHROME
CTMB tOP mounT
The Rev-A-Shelf CTMB Top Mount Brackets allow you to utilize the CB Series wire baskets in openings that are not the standard 18”, 24”, or 30” widths. Simply mount the brackets to the underside of a shelf and then attach the CB Series basket to the bracket. Part # CTMB-18 CTMB-24 CTMB-30
DESCRIPTION 18” Top Mount Bracket 24” Top Mount Bracket 30” Top Mount Bracket
DIMENSIONS Min. opening 18-1/2” Min. opening 24-1/2” Min. opening 30-1/2”
G-353
RESIDENTIAL GRADE CLOSET ROD & HARDWARE aluminum Oval 1-3/16 x 19/32” Closet Rod • Eight foot lengths • Wall thickness 1/16”
aluminum Round 1-5/16” Closet Rod
• Eight foot length • Wall thickness (5/64”)
PART #
FINISH
S84-1516-SB Satin Brass S84-1516-SC Satin Chrome S84-1516-ORB Oil Rubbed Bronze PART #
FINISH
S84-3015-SB Satin Brass S84-3015-SC Satin Chrome S84-3015-ORB Oil Rubbed Bronze
ROUND 1-5/16” CLOSET ROD FLANGE with PINS U-FLANGE
OVAL Closet Rod supports for 19/32” oval closet rod
5mm PIN
SCREW MOUNT
• 5mm & 8mm Pins PART #
S84P-1516U-SB S84P-1516U-SC S84P-1516U-ORB S84P-1516O-SB S84P-1516O-SC S84P-1516O-ORB
• 25/32” x 1-15/16” Size PART #
MOUNTING
FINISH
S84-3015P-SB Satin Brass 5mm S84-3015P-SC Satin Chrome Pins S84-3015P-ORB Oil Rubbed Bronze S84-3015S-SB Satin Brass Screw S84-3015S-SC Satin Chrome Mount S84-3015S-ORB Oil Rubbed Bronze Screws sold separately. Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
OVAL ROD CENTER SUPPORTS FOR 15mm x 30mm OVAL ROD • Designed to give extra support for longer spans.
PART #
FINISH
S84-3015CS-SB Satin Brass S84-3015CS-SC Satin Chrome S84-3015CS-ORB Oil Rubbed Bronze Screws sold separately. Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
G-354
O-FLANGE
• 1-9/16” OD Size
DESCRIPTION
U-Flange w/Pins O-Flange w/Pins
FINISH
Satin Brass Satin Chrome Oil Rubbed Bronze Satin Brass Satin Chrome Oil Rubbed Bronze
ROUND Closet Rod supports for 1-5/16” round rod • Screw Mount • 2-3/4” OD Size PART #
DESCRIPTION
FINISH
S84-1516U-SB Satin Brass S84-1516U-SC U-Flange Satin Chrome S84-1516U-ORB Oil Rubbed Bronze S84-1516O-SB Satin Brass S84-1516O-SC O-Flange Satin Chrome S84-1516O-ORB Oil Rubbed Bronze Screws sold separately.Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
ROUND CENTER ROD SUPPORTS FOR 1-5/16” round rod
• Designed to give extra support for longer spans. PART #
FINISH
S84-1150CS-SB Satin Brass S84-1150CS-SC Satin Chrome S84-1150CS-ORB Oil Rubbed Bronze Screws sold separately.Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
STEEL TUBING FOR HANGRAIL, DISPLAYS OR CLOSET APPLICATIONS STEEL OVAL 1-1/8” x 9/16” (30mm x 15mm) CLOSET ROD TUBING • Eight & ten foot lengths. • Polished chrome finish. • Use #6 flathead screws.
TOP MOUNT:
PART # S84-320-8 S84-320-10
S84-160 Hook
S84-161 Hook With Bar
1-1/8” x 9/16” (30mm x 15mm) FITTINGS
S84-250
Ceiling Bracket End (Adj. Height) 1-3/4" Base
S84-260
Ceiling Bracket Center (Adj. Height) 1-3/4" Base
3-1/4" Closed 4-1/4" Opened
S84-190
GAUGE 20 gauge 22 gauge
S84-170
S84-180
Wall Bracket Center Wall Bracket Right End Wall Bracket Left End Projection - 3-3/4" Projection - 3-3/4" Projection - 3-3/4"
S84-3015CS-BC Projection - 3”
S84-802NP Nickel Closet Rod Support Screw Type
3-1/4" Closed 4-1/4" Opened
STEEL ROUND BRITE CHROME 5/8” CLOSET ROD • 4 foot lengths. PART # LENGTH A1BC 48”
1-1/8” x 9/16” (30mm x 15mm) OVAL END CAP
• Black CDPC with Chrome plated top. • 14 - 19 Gauge. S58-3015-CH
For more tubing, see page 123
STEEL 5/8” U-FLANGE FOR 5mm HOLE
• Nickel Closet Rod Support 32mm System
PART # S84-803NP
G-355
STEEL CLOSET ROD & HARDWARE BRASS FINISH
BRUSHED NICKEL FINISH
S84-106-BR S84-1150CS-BB • Center Support For 1-5/16” Tube.
• .080” Wall Thickness. • 1-5/16” Outside Diameter. • 6 Ft. Long Closet Rod.
S84-106-BN • .053” Wall Thickness. • 1-5/16” Outside Diameter. • 6 Ft. Long Closet Rod.
S84-505-BR
S84-0495-BN • Maximum Duty Shelf/ Hang Rod Bracket 500 lbs Each Load Capacity. • 11-1/4” W x 8” H
S84-6146-BN
• 2-1/2” O & U Flange Set For 1-5/16” Tube.
• 6” L Scroll Bracket.
S84-8150-BR S84-8152-BR • Shelf/Hang Rod Bracket. • Size: 11-5/8” W x 10-7/8” H • 12” Overall Depth
• Deco Backet. • Size: 9” W x 9” H • 10” Overall Depth
BRONZE FINISH
S84-505-BN • O & U Flange Set For 1-5/16” Tube.
S84-0017-BN • End Caps For 1-5/16” Tube.
WHITE EPOXY COATED FINISH S84-106-WH-6
S84-106-BZ
S84-8091-BZ
• .053” Wall Thickness. • 1-5/16” Outside Diameter. • 6 Ft. Long Closet Rod.
• Scroll Bracket. • Size: 8” W x 8” H.
S84-8091-WH • .053” Wall Thickness. • 1-5/16” Outside Diameter. • 6 Ft. Long Closet Rod.
S84-0017-BZ • End Cap For 1-5/16” Tube.
S84-6150-WH • Shelf/Hang Rod Bracket. • Size: 12-13/16” W x 11” H.
S84-505-BZ • O & U Flange Set For 1-5/16” Tube.
G-356
• Scroll Bracket. • Size: 8” W x 8” H.
S84-0495-WH • Maximum Duty Shelf/Hang Rod Bracket 500 lbs. Each Load Capacity. • Size: 11-1/4” W x 8” H
S84-0495-BZ • 11-1/4” W x 8” H • Maximum Duty Shelf/Hang Rod Bracket 500 lbs. Each Load Capacity.
S84-505-WH • O & U Flange Set For 1-5/16” Tube.
S84-0017-WH • End Caps For 1-5/16” Tube.
CLOSET ACCESSORIES COAT & HAT HOOKS
• 3” Projection • Matching screws included. PART #
FINISH
CH-37-BR Bright Brass CH-37-CH Bright Chrome CH-37-SN Satin Nickel
• Heavy Duty 4-1/2” O.D. • Brass: 3-3/4” Projection • Satin Nickel: 3-9/16” Projection • Matching screws included.
PART #
CH-38-BR CH-38-SN
• 2-3/16” Projection • Matching screws included.
FINISH
PART #
FINISH
CH-39-BR Bright Brass CH-39-CH Bright Chrome
Bright Brass Satin Nickel
SUSPENSION RAIL & BRACKETS
BONUS Save time with this unique hole pattern feature
PRODUCT FEATURES: • All new patent pending suspension rail makes quick work of any installation. • The unique hole pattern allows the installer to quickly locate all of the stud locations. Simply find the first stud, identify the hole and there will be a stud every time the pattern repeats. • All metal brackets - cover sold separately. • 286 lb. carrying capacity per wall cabinet. Rail & Bracket Cover Colors: • Left (L) or Right (R) brackets available, please specify when ordering. Almond
SUSPENSION RAIL & COVERS PART#
SUS-R SUS-C-WH SUS-C-AL SUS-C-BR
DESCRIPTION
8’ Suspension Rail White Rail Cover Almond Rail Cover Brown Rail Cover
Brown
White
SUSPENSION RAIL BRACKETS & COVERS PART#
(SPECIFY LEFT OR RIGHT)
SUS-B-(L or R) SUS-BC-WH-(L or R) SUS-BC-AL-(L or R) SUS-BC-BR-(L or R)
COLOR
Rail Bracket Bracket Cover-White Bracket Cover-Almond Bracket Cover-Brown
G-357
PULL DOWN CLOSET ROD w/Adjustable Handle
Rev-A-Shelf’s Pull-Down Closet Rod is available in two sizes and features an adjustable rod length to accommodate openings from 18” to 26” (CPDR-1826), 26” to 35” (CPDR2635) and 35” to 48” (CPDR-3548). The handle is adjustable to accommodate universal design and handicap accessible applications. This Closet Rod will pull down 33” and features a soft-closing mechanism, which will slowly draw the bar back to the upright position. Each unit has a 25 lb. weight capacity.
Sof Clos t ing FINISH AVAILABLE IN CHROME w/ BLACK
PART # DIMENSIONS CPDR-1826 18” - 26” W CPDR-2635 26” - 35” W CPDR-3548 35” - 48” W
OPI ECONOMY SERIES: “S-LIFT 7” Wardrobe Lift
SPIRAL CLOTHES RACK in a Chrome Finish
Break away from the ordinary with Rev-A-Shelf’s Spiral Clothes Rack. This perfect corner closet solution has a 360º turning radius with an adjustable height of 72-1/2” to 84” and the ability to hand 40 single items of clothing from top to bottom. The SHR-3684 comes complete with a stabilizer bar, post and pivot hardware, and mounting hardware.
PRODUCT FEATURES:
• Side mounted • Telescoping Wardrobe rail will accommodate cabinet widths ranging from 32" to 46" • Constructed of Aluminum & Plastic • Set includes: mounting brackets, clothes lifter, pull pole, wardrobe rail and screws • 25 lb. load rating • Must hold the pull pole down for easy access to clothes
S-LIFT7
PART #
DESCRIPTION DIMENSIONS FINISH 360° Spiral 23” W x 72-1/2” SHR-3684 Chrome Clothes Rack - 84” H
G-358
IRONING CENTERS FOLD OUT IRONING BOARD
Surface Area CIB-16CR (Closet Model)
WIDTH 12” 305 mm
LENGTH 29-3/8” 746 mm
VIB-20CR (Vanity Cabinet)
WIDTH 12” 305 mm
LENGTH 37-1/2” 953 mm
Product dimensions
Rev-A-Shelf’s unique pull-out ironing board can be retro fitted and folds away neatly into the space of a drawer. Simply open, unfold, and the board rises automatically with a locking device that keeps the board in place and even with the counter top.
CIB-16CR (Closet Model)
WIDTH 14-1/4” - 21” 362-534 mm
DEPTH 16” 407 mm
PART # DESCRIPTION DIMENSIONS FINISH CIB-16CR 16” Fold Out Ironing Board 14-1/2-21” W x 16” D x 4” H Chrome RAS-CIB-COVER-R-52 Replacement Cover (Closet) – Silver VIB-20CR 20” Fold Out Ironing Board 14-1/2”-21” W x 20” D x 4” H Chrome RAS-VIB-COVER-52 Replacement Cover (Vanity) – Silver
VIB-20CR (Vanity Cabinet)
WIDTH 14-1/4” - 21” 362-534 mm
DEPTH 20” 508 mm
RECESS MOUNT IRONING CENTER
• Raised panel door available in unfinished oak, maple or scratch resistant white. • Comes with a storage shelf, heat shield (for safe iron storage), sleeve board (n/a on white unit), swivel ironing board, hook and cover & pad set. • Works with EU-1 electrical unit. • All installation hardware included. • 16”W x 47-3/4”H x 7”D outside dimensions. • 14-1/4”W x 46-1/4”H x 3-1/2”D cut out. • Board dimensions 47-1/2” x 11-1/2”. PART # IB-400 IB-400-MP IB-420
ELECTRICAL UNIT w/LIGHT
• UL listed. • Bulb not included. • Includes light fixture, plug & 30 minute timer. • Works with recessed mount ironing centers only. • Hardwire unit.
Plug
LED MOTION CLOSET LIGHT Linear Material: White Plastic w/ Frosted Lens Cover
General Duty Light Output
N EW
No Wiring Required!
• Built-in motion sensor • On/off switch • 3 AA batteries included • Pivots
Light stays on for 30 seconds once motion is detected LIGHTING SPECIFICATIONS COLOR TEMPERATURE
Warm White
COLOR Silver Green Pattern Blue Pattern
!
PRODUCT FEATURES:
REPLACEMENTS COVERS
PART # COV-815-SIL COV-825-GN COV-835-BL
White
FINISH Oak Maple White
PART # EU-1
• Works with both Surface & Recess Mount Ironing Centers.
Maple
Oak
Pure White
3000K
PART #
LUMINESCENCE
Cool White
COLOR TEMP
LED-MOTION Warm White
COLOR LUMENS Warm White 27
LENGTH
10”
Average Rated For 100,000 Hours
# OF LED CHIPS
9
Easy screw mount bracket (screws included)
G-359
BATHROOM VANITY PULL OUT HAMPERS PULL OUT HAMPER WITH PLASTIC BIN (NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)
PART # HPRV-1520-S
COLOR White
DESCRIPTION 14-1/4” W x 20” D x 19-1/4” H
WEIGHT 12 lbs.
Full extension slides
PULL-OUT OR DOOR MOUNT HAMPER W/LID Individual Pack Contains: (1) hamper basket, full extension slides and instructions. Fully Assembled. PART #
PULL-OUT DOOR MOUNT
DESCRIPTION WEIGHT 19-7/8"W (505mm) HPRV-1925S 26"H (661mm) 12 lbs. 14"D (356mm) 19-7/8”W (505mm) HPRV-1925DM-S 26"H (661mm) 13 lbs. 14"D (356mm)
PULL OUT WIRE HAMPER (NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT) PART # COLOR DESCRIPTION WEIGHT HRV-1215S White 11-7/8” W x 18” D x 14-3/4” H 12 lbs. HRV-1220S White 11-7/8” W x 18” D x 19-3/8” H 13 lbs. HRV-1515S White 14-3/4” W x 18” D x 14-3/4” H 13 lbs. HRV-1520S White 14-3/4” W x 18” D x 19-3/8” H 14 lbs. Full extension slides
PULL OUT POLYMER HAMPER/UTILITY BASKET (NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)
PART #
DESCRIPTION 1.37 cu. ft. utility basket with HURV-1512S frame and full extension slides. 14-1/4” W x 11-7/8” H x 18” D. 1.37 Cu. Ft. Replacement HUB-470X8-52 Basket 5345-DM-KIT-52 Door Mount Extenders
G-360
WEIGHT PER CARTON 10 lbs. – –
STEMWARE AND WINE RACK COLLECTION 3150-11SN
3150-11CR
3150-11BR
Rev-A-Shelf announces the NEW 3000 Series Stemware & Wine Bottle Racks. The entire collection has been redesigned to provide both durability and elegance, featuring new heavy gauge wire construction and a hidden mounting plate. Ideal for showcasing wine and glass collections. Available in three finishes traditional Chrome, stylish Satin Nickel & beautiful Brass. 3250SN
11” STEMWARE HOLDER 16” STEMWARE HOLDER 18” STEMWARE HOLDER DOUBLE BOTTLE RACK 11” QUAD STEMWARE HOLDER
3450-11CR
PART NUMBER 3150-11CR 3150-11SN 3150-11BR 3150-16CR 3150-16SN 3150-16BR 3150-16ORB 3150-18CR 3150-18SN 3150-18BR 3150-18ORB 3250CR 3250SN 3250BR 3250ORB 3450-11CR 3450-11SN 3450-11BR 3450-11ORB
DIMENSIONS 4-1/4” W x 11” D x 1-1/2” H 4-1/4” W x 11” D x 1-1/2” H 4-1/4” W x 11” D x 1-1/2” H 4-1/4” W x 16” D x 1-1/2” H 4-1/4” W x 16” D x 1-1/2” H 4-1/4” W x 16” D x 1-1/2” H 4-1/4” W x 16” D x 1-1/2” H 4-1/4” W x 18” D x 1-1/2” H 4-1/4” W x 18” D x 1-1/2” H 4-1/4” W x 18” D x 1-1/2” H 4-1/4” W x 18” D x 1-1/2” H 4-1/4” W x 9” H x 5/8” Thick 4-1/4” W x 9” H x 5/8” Thick 4-1/4” W x 9” H x 5/8” Thick 4-1/4” W x 9” H x 5/8” Thick 17” W x 11” D x 1-1/2” H 17” W x 11” D x 1-1/2” H 17” W x 11” D x 1-1/2” H 17” W x 11” D x 1-1/2” H
3450-11SN
FINISH Chrome Satin Nickel Brass Chrome Satin Nickel Brass Bronze Chrome Satin Nickel Brass Bronze Chrome Satin Nickel Brass Bronze Chrome Satin Nickel Brass Bronze
3250BR
3150-11CR & 3250BR
STEMWARE HOLDER Clear Acrylic • 8 Ft. Lengths
PART # 1120-CL
Uses: Bars, Kitchens, China Cabinets, Wall Systems
G-361
SIGNATURE SERIES WOOD RANGE HOODS P R O D U C T S
• Available in 30”, 36” and 42” widths. • Both styles are available in unfinished Oak, Maple and Cherry. • Metal liner included. • Installation instructions included. • Chimney blowers and Duct kits sold separately. • Chimney can be trimmed to fit different heights. • Alder & Hickory Available - Please inquire.
CHIMNEY
(Sold Separately)
CHIMNEY
(Sold Separately)
Arched Style
Straight Style
ARCHED STYLE PART #
MANUAL VENTILATOR
• 500 CFM/8.2 sones • Stainless Steel finish • 2 x 20 watt halogen lamps • Push button controls • Quiet centrifugal blower • Heat sensor detects excessive heat & adjusts automatically Designed for use with VENT07 & VENT08
DUCTWORK KIT DUCTKIT
SARAN30-OAK SARAN30-MP SARAN30-CH SARAN36-OAK SARAN36-MP SARAN36-CH SARAN42-OAK SARAN42-MP SARAN42-CH
Oak Maple Cherry Oak Maple Cherry Oak Maple Cherry
HEIGHT
24-7/8” 24-7/8” 24-7/8” 24-7/8” 24-7/8” 24-7/8” 24-7/8” 24-7/8” 24-7/8”
TOTAL WIDTH
32-3/8” 32-3/8” 32-3/8” 38-3/8” 38-3/8” 38-3/8” 44-3/8” 44-3/8” 44-3/8”
STRAIGHT STYLE PART #
VENT07
SPECIES
SSRAN30-OAK SSRAN30-MP SSRAN30-CH SSRAN36-OAK SSRAN36-MP SSRAN36-CH SSRAN42-OAK SSRAN42-MP SSRAN42-CH PART #
CHI-30-OAK CHI-30-MP CHI-30-CH CHI-36-OAK CHI-36-MP CHI-36-CH CHI-42-OAK CHI-42-MP CHI-42-CH
SPECIES
Oak Maple Cherry Oak Maple Cherry Oak Maple Cherry
SPECIES
Oak Maple Cherry Oak Maple Cherry Oak Maple Cherry
HEIGHT
22-7/8” 22-7/8” 22-7/8” 22-7/8” 22-7/8” 22-7/8” 22-7/8” 22-7/8” 22-7/8”
CHIMNEY
WORKS WITH
SARAN30*, SARAN30*, SARAN30*, SARAN36*, SARAN36*, SARAN36*, SARAN42*, SARAN42*, SARAN42*
SSRAN30* SSRAN30* SSRAN30* SSRAN36* SSRAN36* SSRAN36* SSRAN42* SSRAN42* SSRAN42*
TOTAL WIDTH
32-3/8” 32-3/8” 32-3/8” 38-3/8” 38-3/8” 38-3/8” 44-3/8” 44-3/8” 44-3/8” HEIGHT
23-1/2” 23-1/2” 23-1/2” 23-1/2” 23-1/2” 23-1/2” 23-1/2” 23-1/2” 23-1/2”
ARTISAN STYLE RANGE HOODS • Available in 36” & 42” widths. • Chimney allows for 12” of trim. • Silver metallic liner included. • Alder available, please inquire.
G-362
PART # ARAN36-OAK ARAN36-MP ARAN36-CH ARAN42-OAK ARAN42-MP ARAN42-CH
SPECIES Oak Maple Cherry Oak Maple Cherry
HEIGHT 46” 46” 46” 46” 46” 46”
WIDTH 36” 36” 36” 42” 42” 42”
DEPTH 19” 19” 19” 19” 19” 19”
HOOD WIDTH
30” 30” 30” 36” 36” 36” 42” 42” 42”
HOOD WIDTH
30” 30” 30” 36” 36” 36” 42” 42” 42”
WIDTH
11-7/16” 11-7/16” 11-7/16” 17-7/16” 17-7/16” 17-7/16” 23-7/16” 23-7/16” 23-7/16”
DEPTH
19” 19” 19” 19” 19” 19” 19” 19” 19”
DEPTH
20-3/16” 20-3/16” 20-3/16” 20-3/16” 20-3/16” 20-3/16” 20-3/16” 20-3/16” 20-3/16” DEPTH
9-11/16” 9-11/16” 9-11/16” 9-11/16” 9-11/16” 9-11/16” 9-11/16” 9-11/16” 9-11/16”
WOOD CANOPY RANGE HOODS • Available in 30” or 36” widths. • Classic style available in unfinished Alder, unfinished Red Oak, unfinished Maple or unfinished Cherry. • Sanded and ready to finish. • Produced using top quality hardwoods and “A” grade veneers. • Simple installation instructions included. • Metallic Silver Liner included. • Ventilators sold separately. • Attractive professional appearance. • Very quiet operation. • Simple filter removal/cleaning. • 3 year warranty. • Omega series supplied with Galley Rail package.
CLASSIC SERIES
PART # SPECIES WIDTH HEIGHT CLARAN30-RO Red Oak 30” 23-1/2” CLARAN30-MP Maple 30” 23-1/2” CLARAN30-CH Cherry 30” 23-1/2” CLARAN30-AL Alder 30” 23-1/2” CLARAN36-RO Red Oak 36” 23-1/2” CLARAN36-MP Maple 36” 23-1/2” CLARAN36-CH Cherry 36” 23-1/2” CLARAN36-AL Alder 36” 23-1/2”
DEPTH 8-5/16” 8-5/16” 8-5/16” 8-5/16” 8-5/16” 8-5/16” 8-5/16” 8-5/16”
Manual Ventilator • 390 CFM • Silver Metallic finish • 2 x 40 watt lamps • Quiet centrifugal blower with 3-Speed slide control • Heat sensor detects excessive heat & adjusts automatically
P R O D U C T S
OMEGA SERIES
PART # SPECIES OMERAN30-RO Red Oak OMERAN30-MP Maple OMERAN30-CH Cherry OMERAN30-AL Alder OMERAN36-RO Red Oak OMERAN36-MP Maple OMERAN36-CH Cherry OMERAN36-AL Alder
HEIGHT 24” 24” 24” 24” 24” 24” 24” 24”
WIDTH 30” 30” 30” 30” 36” 36” 36” 36”
DEPTH 7-1/4” 7-1/4” 7-1/4” 7-1/4” 7-1/4” 7-1/4” 7-1/4” 7-1/4”
Designed for use with VENT07 & VENT08
DUCTWORK KIT DUCTKIT
VENT08
G-363
KITCHEN STORAGE Spice Rack
Modular Spice Rack P R O D U C T S
Clear Natural Maple Finish w/Adjustable Bar
Approx. 5” opening from bottom to top shelf
PART # SIZE SRW-8 8-3/4"W x 7-1/2"H x 3-1/2"D SRW-11 11-3/4"W x 7-1/2"H x 3-1/2"D
• Designed to hold even large jars. • Manufactured from maple plywood. • Can be trimmed to size. • 8” Deep x 19” Wide x 10” Tall. • Clear finish. • Simply screws into cabinet back. PART # SIZE MSR-1910 19” W x 10” H
Plate Display Unit
Display treasured china in a fully assembled unit with a tasteful moulding shape and dowels of the same species. Mouldings have trim area of 1-1/2” on each end. Dowels spaced 2” on center. Red Oak, Cherry or Maple PART # FINISH SIZE PD-30-RO Red Oak 30” L PD-30-MP Maple 30” L PD-30-CH Cherry 30” L PD-36-RO Red Oak 36” L PD-36-MP Maple 36” L PD-36-CH Cherry 36” L
Wood Spice Drawer Insert • Designed for storage of all types of spice jars. • Produced from Baltic Birch plywood finished with a durable UV coating. • Four widths available, easily trimmed to desired size. • Boxed individually. • 2" Height - 19" Depth.
PART # SDI-1319 SDI-1619 SDI-1919
G-364
WIDTH 13" 16" 19"
Plate Display Unit
NOTE: 3 center dowels on all units are removable for cleaning purposes. They are sent unassembled.
13-1/16” High x 3/4” Wide
KITCHEN STORAGE SOLUTIONS DEEP BIN SUPER SUSAN
P R O D U C T S
SELECT SPICE SUSAN PRODUCT FEATURES: • Fits perfectly in 12" cabinets. • 1" lip. • Perfect for spices. • Plywood core. • Includes bearing with rubber feet. • Can be moved from cabinet to work area/ no attachment to shelf needed.
PRODUCT FEATURES: • Single shelf unit with bearing. • Solid maple rim. • 12mm multi-directional plywood shelf. • Works great for pots and pans, kitchen appliances & bulk items. • 6" high lip, 30" diameter. • 450 lb. weight capacity. • Cast aluminum bearing featuring ultra smooth movement.
PART # SDFS-30
DESCRIPTION 30" Pie Cut
"Tra-Sta" Organizer • The perfect solution for cookie sheets, baking trays and muffin pans. • Four pre-finished maple veneer dividers slide in grooved and pre-drilled top and bottom rails. • Rails designed to be fastened in multiple locations to accept a variety of pots, pans or lids. • Easily trimmable to fit any size cabinet. • Dividers: 23-3/4"W x 23-3/4"H, Rails: 3/4"W x 24"L. • Dividers are easily removed for simple cleaning of the cabinet. • Includes 4 finished dividers and 8 drilled rails.
PART # DESCRIPTION SSF-10 10" Spice Susan Single Shelf
"Tra-Sta" Deep Drawer Kit • Modular & Adjustable allow for organization of pots, pans, lids or plates. • Three pre-finished 11” x 24” maple dividers. • 6 pre-drilled mounting rails. • Easily trimmable for various drawer depths.
PART # TS-DDK
PART # TS-2424
G-365
CABINET SECURITY PRODUCTS REV-A-LOCK™ SECURITY SYSTEM
A Remarkable Unique Idea For Cabinet Safety • Concealed • Childproof
Our Rev-A-Lock™ Security System is a world patented catch & key component system designed to combine the security of a lock with the simplicity of a catch. A magnetic “key” placed on the cabinet door releases the catch. When the magnet is removed, the catch springs back - so when the door is closed...it stays that way.
The lock will install on thicknesses of ½” to 1-9/16” and operate through wood, glass, metal and particle board. All locks are now standard with the patented unlocking device, which enables you to disable the lock for extended periods of time and the extension slug for applications now up to 1-9/16” thick.
PART # OPL-201 OPL-202
INSTALLATION INSTRUCTIONS INCLUDED
DESCRIPTION Lock Assembly Magnetic Key
SET PER CARTON 25 25
WEIGHT PER CARTON 5.4 lbs. 2.8 lbs.
REV-A-LIFT CONTAINS: Lifting mechanism only; which locks in both open & closed positions. 21-3/4” depth of swing motion. 17-1/8” clearance height of working area when not in use. For 19-1/2” frame cabinets & 20-7/8” frameless cabinets. NEW CHROME FINISH NOTE: Rev-A-Lift requires a full height cabinet in order to come all the way to countertop height. This means no drawer (see drawings below). - SHELF IS NOT INCLUDED. PART #
DESCRIPTION Heavy Duty Mixer/Appliance RAS-ML-HDCR Lift w/ Built in Shock Dampers RECOMMENDED SPRING POSITION FOR VARYING MIXER WEIGHT 0-20 lbs. = 1 20-30 lbs. = 2 30-60 lbs. = 3
G-366
WEIGHT 7 lbs.
SINK FRONT
(TIP-TOP)
TRAY PRODUCTS
MOLDED POLYMER TIP-OUT TRAYS
FALSE FRONT TIP-OUT TRAY WITH STOPS CONTAINS: 2 trays per set, trays w/tabs on both ends. PART # COLOR 6562-11-11-52 White 6562-11-15-52 Almond 6562-14-11-52 White 6562-14-15-52 Almond
DESCRIPTION 11” Trays w/Tab Stops (280mm) 11” Trays w/Tab Stops (280mm) 14” trays w/Tab Stops (360mm) 14” Trays w/Tab Stops (360mm)
SET PER WEIGHT PER CARTON CARTON 1 set .9 lbs. 1 set .9 lbs. 1 set 1.1 lbs. 1 set 1.1 lbs.
FALSE FRONT TIP-OUT TRAY SYSTEM (Std/Acc)
CONTAINS: Each set has 1 standard and 1 accessory tray and 2 pair of “self-holdin”® hinges. Note: For use with 2 fronts on sink base cabinet. SET PER WEIGHT PER DESCRIPTION CARTON CARTON 11” std/Acc Trays 6572-11-11-52 White 1 set 2 lbs. (280mm) 11” std/Acc Trays 6572-11-15-52 Almond 1 set 2 lbs. (280mm) 14 1/4” std/Acc Trays 6572-14-11-52 White 1 set 2.3 lbs. (362mm) 14 1/4” std/Acc Trays 6572-14-15-52 Almond 1 set 2.3 lbs. (362mm) PART #
COLOR
EXTRUDED TIP-OUT TRAYS 36” TRAY W/HINGES & END CAPS
CONTAINS: 36” (915mm) extruded tray, hinges, end caps, adhesive, per pack number. Custom cut trays to length & glue end caps on with Rev-A-Glue (included). PART #
COLOR
6551-36-11-52
White
6551-36-15-52
Almond
6551-36-11-50
White
6551-36-15-50
Almond
DESCRIPTION 1 Tray - 2 pr. Hinges & End Caps 1 Tray - 2 pr. Hinges & End Caps 1 Tray - 1 pr. Hinges & End Caps 1 Tray - 1 pr. Hinges & End Caps
SET PER WEIGHT PER CARTON CARTON 1 set
2 lbs.
1 set
2 lbs.
1 set
1.5 lbs.
1 set
1.5 lbs.
POLISHED STAINLESS STEEL TIP-OUT TRAYS
2-1/8” Deep, 3” High in back, 1-1/4” High in front
PART # DESCRIPTION 6581-10-52 10” Tray (250mm) 6581-11-52 11-1/4” Tray (280mm) 6581-13-52 13” Tray (330mm) 6581-14-52 14-1/4” Tray (360mm) 6581-16-52 16” Tray (400mm) 6581-19-52 19” Tray (480mm) 6581-22-52 22” Tray (559mm) 6581-25-52 25” Tray (635mm) 6581-28-52 28” Tray (711mm) 6581-31-52 31” Tray (788mm)
• Each Polished Stainless Steel Tip-Out Tray comes with a pair of Rev-A-Shelf’s patented Self-Holdin® hinges.
CHROME PLATED EURO HINGES Can be used for either frameless or framed cabinet applications. Opening angle can be adjusted from 45°-90° PART # 6552-ETH-10
DESCRIPTION Euro Hinge False Front Hinge
G-367
CUTLERY TRAYS All Wood Items Are Carb Phase II Compliant.
WOOD SPICE DRAWER INSERT • Contains one wood tray insert that can be customized for various drawer sizes. PART # 4SDI-18 4SDI-24
DIMENSIONS 16” W x 19-3/4” L x 1-1/2” D 22” W x 19-3/4” L x 1-1/2” D
COMBINATION KNIFE HOLDER/CUTTING BOARD • Contains knife rest, cutting board, full extension Accuride slides, mounting hardware and screws (knives not included). PART # 4KCB-18 4KCB-21 4KCB-24
DIMENSIONS 14-1/2” W x 22-3/4” L x 4-3/4” H 17-1/2” W x 22-3/4” L x 4-3/4” H 20-1/2” W x 22-3/4” L x 4-3/4” H
WOOD KNIFE BLOCK WITH DIVIDERS Rev-A-Shelf’s unique 4WKB-1 Knife Block Tray Insert is out of the box ready at 18-1/2” x 22” providing 19 slots to store knives and has a separate compartment for other utensils.
PART # 4WKB-1
G-368
DIMENSIONS 18-1/2” W x 22” L x 2-7/8” H
ROLLING TRAY SYSTEM BONUS TRIMMABLE
RT10-*
RT12-*
Increase space in kitchen drawers with Rev-A-Shelf’s rolling tray system. The following notes apply to all rolling tray systems: •F or the full cutlery tray systems to provide adequate accessibility to the utensils in the lower tray, a portion of the drawer back must be removed. No depth trimming of the lower utility tray will be necessary. •M inimum height refers to the cabinet drawer opening, not just the depth of the drawer. •R olling tray systems are available in a glossy white finish only. • Made of heavy gauge Polystyrene. •F eatures a removable rolling cutlery tray.
RT14-*
RT18-*
SHALLOW TRAY SYSTEM 3-1/8” HIGH
PART # RT10-3F RT12-3F RT14-3F RT18-3F
TRAY SIZE 11-3/4” W x 21-1/4” D 14-1/2” W x 21-1/4” D 17-3/4” W x 21-1/4” D 21-3/4” W x 21-1/4” D
MINIMUM TRIM 8-3/4” W x 21-1/4” D 11-3/4” W x 21-1/4” D 14-3/4” W x 21-1/4” D 17-3/4” W x 21-1/4” D
PART # RT10-4F RT12-4F RT14-4F RT18-4F
TRAY SIZE 11-3/4” W x 21-1/4” D 14-1/2” W x 21-1/4” D 17-3/4” W x 21-1/4” D 21-3/4” W x 21-1/4” D
MINIMUM TRIM 8-3/4” W x 21-1/4” D 11-3/4” W x 21-1/4” D 14-3/4” W x 21-1/4” D 17-3/4” W x 21-1/4” D
DEEP TRAY SYSTEM 4-1/8” HIGH
SPECIFICATION: DRAWER CLEARANCE
Shallow System Requires 3-1/8” mi. clearance Base is 1-5/8” deep Top Rolling Tray Base Tray
1-5/8” (42mm)
Deep System Requires 4-1/8” mi. clearance Base is 2-7/16” deep
3-1/8” (80mm)
4-1/8”
Top Rolling Tray Base Tray
2-7/16”
CUTLERY TRAYS • All cutlery trays are made of rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. This single drawer insert is available in white or almond colors. • All tray heights are 2-3/8”
CT-1W-10
CT-2W-10
PART # CT-1A-10 CT-1W-10 CT-2A-10 CT-2W-10 CT-3A-10 CT-3W-10 CT-4A-10 CT-4W-10
COLOR Almond White Almond White Almond White Almond White
CT-3W-10
TRAY DIMENSIONS 11-1/2” W x 21-1/4” D 11-1/2” W x 21-1/4” D 14-1/4” W x 21-1/4” D 14-1/4” W x 21-1/4” D 17-1/2” W x 21-1/4” D 17-1/2” W x 21-1/4” D 21-7/8” W x 21-1/4” D 21-7/8” W x 21-1/4” D
CT-4W-10
MINIMUM TRIM SIZE 8-5/8” W x 17-3/4” D 8-5/8” W x 17-3/4” D 11-5/8” W x 17-3/4” D 11-5/8” W x 17-3/4” D 14-3/4” W x 17-3/4” D 14-3/4” W x 17-3/4” D 18-3/8” W x 17-3/4” D 18-3/8” W x 17-3/4” D
G-369
UTILITY TRAYS • All utility trays are made of rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. • All tray heights are 2-3/8”. PART # UT-10A-52 UT-10W-52 UT-12A-52 UT-12W-52 UT-15A-52 UT-15W-52 UT-18A-52 UT-18W-52
UT-10
Min. Trim Size 8-5/8” x 17-3/4” 219 mm x 451 mm
MINIMUM TRIM SIZE 8-5/8” W x 17-3/4” D 8-5/8” W x 17-3/4” D 11-5/8” W x 17-3/4” D 11-5/8” W x 17-3/4” D 14-3/4” W x 17-3/4” D 14-3/4” W x 17-3/4” D 18-3/8” W x 17-3/4” D 18-3/8” W x 17-3/4” D
UT-15
UT-18
362 mm
445 mm
556 mm
17-1/2”
21-7/8”
21-1/4” (540 mm)
21-1/4” (540 mm)
293mm
TRAY DIMENSIONS 11-1/2” W x 21-1/4” D 11-1/2” W x 21-1/4” D 14-1/4” W x 21-1/4” D 14-1/4” W x 21-1/4” D 17-1/2” W x 21-1/4” D 17-1/2” W x 21-1/4” D 21-7/8” W x 21-1/4” D 21-7/8” W x 21-1/4” D
UT-12 14-3/4”
11-1/2”
21-1/4” (540 mm)
COLOR Almond White Almond White Almond White Almond White
21-1/4” (540 mm)
UT-*-52
Min. Trim Size 11-5/8” x 17-3/4” 296 mm x 451 mm
Min. Trim Size 14-3/4” x 17-3/4” 375 mm x 451 mm
Min. Trim Size 18-3/8” x 17-3/4” 467 mm x 451 mm
UNIVERSAL SPICE TRAYS • Keep spices conveniently stored in a drawer with this tiered configuration polymer spice tray. Trays are 50” x 21” trimmable to any size. • Universal Spice Trays are best utilized with 22” slides for maximum accessibility. • Need a minimum of 4-1/2” clearance for height. PART # COLOR TRAY SIZE ST50-21A-52 Almond 50” W x 21” D ST50-21W-52 White 50” W x 21” D
ST50-21WH
BREAD DRAWER COVERS NOTE: All polymer bread drawer cover kits includes 1 cover, 1 pair rails and screws. Cover is textured to hide scratches. Can be trimmed to accommodate any drawer dimension.
BDC-24-11
G-370
BDC-200-20
PART # COLOR MAXIMUM DIMENSIONS MINIMUM DRAWER SIZE BDC-200-15 Almond 16-3/4” W x 21-3/4” L 11-5/8” x Any Length BDC-200-11 White 16-3/4” W x 21-3/4” L 11-5/8” x Any Length BDC-200-20 Translucent 16-3/4” W x 21-3/4” L 11-5/8” x Any Length BDC-24-15 Almond 20-1/8” W x 21-3/4” L 16-1/16” x Any Length BDC-24-11 White 20-1/8” W x 21-3/4” L 16-1/16” x Any Length BDC-24-20 Translucent 20-1/8” W x 21-3/4” L 16-1/16” x Any Length
DOOR & CABINET ORGANIZERS All Wood Items Are Carb Phase II Compliant.
2 & 5 SHELF SETS WITH CLIPS
DOOR STORAGE SHELF SETS
Note: Our door storage trays are packaged with screw-in clips. Mounting standards are WEIGHT separate - Part # 6232-26-4528-52 PART # COLOR 6232-08-11-52 White 6232-08-15-52 Almond 6232-14-11-52 White 6232-14-15-52 Almond 6232-20-11-52 White 6232-20-15-52 Almond 6235-08-11-52 White 6235-08-15-52 Almond 6235-14-11-52 White 6235-14-15-52 Almond 6235-20-11-52 White 6235-20-15-52 Almond 6232-26-4528-52 Aluminum
SET PER PER DESCRIPTION CARTON CARTON 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 1 lbs. 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 1 lbs. 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 2 lbs. 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 2 lbs. 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 3 lbs. 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 3 lbs. 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 2.4 lbs. 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 2.4 lbs. 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 4 lbs. 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 4 lbs. 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 5 lbs. 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 5 lbs. 26” Mounting Standards 1 1lbs.
WOOD CUTLERY TRAYS
• Both of the wood cutlery trays are trimmable to fit. PART #
• Smaller height for shallow drawers.
TRAY SIZE 14-5/8” W (min trim 8-3/4”) x 22 L 4WCT-1 (min trim 15-1/2”) x 2-7/8” H 20-5/8” W (min trim 14-3/4”) x 22 L 4WCT-3 (min trim 15-1/2”) x 2-7/8” H 14-5/8” W (min trim 8-3/4”) x 22 L 4WCT-1SH (min trim 15-1/2”) x 2-3/8” H 20-5/8” W (min trim 14-3/4”) x 22 L 4WCT-3SH (min trim 15-1/2”) x 2-3/8” H
TRIMMABLE UTILITY TRAY INSERT
Organize kitchen drawers with Rev-A-Shelf’s new Wood Utility Try Insert. The WUT Series is made of classic birch/maple hardwood with a UV-cured clear finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with two sizes that may be trimmed to fit. PART # DIMENSIONS 4WUT-1 18-1/2” W x 22” D x 2-7/8” H 4WUT-3 24” W x 22” D x 2-7/8”H 4WUT-1SH 18-1/2” W x 22” D x 2-3/8” H 4WUT-3SH 24” W x 22” D x 2-3/8” H
G-371
DOOR & CABINET ORGANIZERS All Wood Items Are Carb Phase II Compliant.
TRAY DIVIDER/FOIL WRAP HOLDER
Baking storage has never been more versatile than with the 447 Pullout Organizer. Designed for 9” and 12” base cabinets, these organizers feature two compartments for storing baking sheets and platters and the removable center racks allow you the ability to store larger platters and bake ware if desired. The unit is made from maple and glides on our patented “tri-slides” for stability. Door mounting is a breeze with our patented door mount brackets that provide up to 5 inches of flexibility for trouble free installation on any door style. PART #
447-bc-5c 447-BC-8C
DESCRIPTION
5” Foil Wrap Holder/Tray Divider 8” Foil Wrap Holder/Tray Divider
WEIGHT PER CARTON
25 lbs. 32 lbs.
TRAY DIVIDERS W/CLIPS
U-SHAPED TRAY DIVIDERS W/SCREWS
CONTAINS: Tray divider with three (3) screw-in clips & fasteners per set. Both trays dividers are 20” deep (508mm). PART #
597-12-10 597-12CR-10 597-18-10 597-18CR-10
COLOR
White Chrome White Chrome
DESCRIPTION
12” High Tray Dividers (305mm) 12” High Tray Dividers (305mm) 18” High Tray Dividers (457mm) 18” High Tray Dividers (457mm)
WEIGHT PER PC.
2 lbs. 2 lbs. 2 lbs. 2 lbs.
CONTAINS: 1- pull out towel bar, 2 prong model, easy glide ball bearing slide with mounting screws. 3-7/8”W x 12-7/8”D x 1-1/2”H SET PER WEIGHT DESCRIPTION CARTON PER CARTON
563-51-C
1
2 Prong Towel Bar-Chrome
2.6 lbs.
PART #
563-32 Towel Holder, White 563-32C Towel Holder, Chrome
10 5/8” Width Spice Rack (270mm) 13 5/8” Width 565-14-52 Spice Rack (346mm)
2 lbs.
SET PER WEIGHT CARTON PER CARTON
1
2.2 lbs.
1
2.4 lbs.
PULL OUT TOWEL BAR
SET PER WEIGHT CARTON PER CARTON
1 1
.4 lbs. .4 lbs.
PULL OUT TOWEL BAR CONTAINS: 1- pull out towel bar, 3 prong model with 12” (305mm) extension with mounting screws. 5” width (127mm) x 17-3/4” depth (451mm) x 1-1/4” (32mm). PART #
563-47 563-47C
G-372
DESCRIPTION
565-10-52
TOWEL HOLDER CONTAINS: Towel holder w/mounting screws. 12-3/4” width (324mm) x 3-1/2” depth (89mm) x 6-1/2” height (165mm).
DESCRIPTION
FINISH
Top shelves are 2-3/8” D; Bottom Shelf is 4-1/8” D 21-3/8” H
TOWEL HOLDER
PART #
DIMENSIONS
DOOR MOUNT SPICE RACKS
TOWEL HOLDER
PART #
PART #
596-10CR-52 3”W x 11-7/8”D x 10”H Chrome
WEIGHT PER CARTON
DESCRIPTION
3 Prong Towel BarWhite 3 Prong Towel BarChrome
SET PER WEIGHT CARTON PER CARTON
1
2 lbs.
1
2 lbs.
PREMIER CHROME WIRE KITCHEN STORAGE COOKWARE ORGANIZER Revolutionize the way you store your pots, pans, and lids with the Two-Tier Cookware Organizer. The 5CW2 features independently operating shelves that accommodate a variety of cookware sizes and brands. The top tier organizes lids and the bottom tier features adjustable dividers to store a variety of larger pots and pans. These beautiful organizers are designed for Base 15 or 24 cabinets. They are made with a heavy-duty chrome plated wire frame and feature 100 lbs. rated full extension ball-bearing slides. The bottom, side and rear mounting provide you the sturdiness you expect and easy installation. Door mounting is also an option with the RV Series Door Mounting Kit.
PART #
CABINET
5CW2-1222-CR BASE 15 5CW2-2122-CR BASE 24 RVDM17KIT
---
WIDTH DEPTH HEIGHT WEIGHT 11-3/4” 22” 18” 29 lbs. (299mm) (559mm) (457mm) 20-3/4” 22” 18-1/8” 39 lbs. (527mm) (559mm) (460mm) -------2 lbs.
G-373
WIRE ACCESSORIES UNDER SINK CHROME BASKET Cleaning just got easier with the Under Sink Caddy. Now you can store multiple cleaning items in one place and carry them with you with the removable caddy. The unique handle adjusts to accommodate plumbing fixtures and the reversible/removable top tray is ideal for paper towel or sponge storage. PART # 544-10C-1
DESCRIPTION Undersink Chrome Basket 11-1/4” W x 16-1/4” D x 19-1/2” H
WEIGHT 4.5 lbs.
PULL-OUT ORGANIZERS (side mount) 5432-05CR - Turn that small space found in a base 9 cabinet into useful storage with this new modern, 2 shelf pull out. It is designed with aluminum shelves and chrome rails. This sleek organizer features a bottom bracket and an adjustable side mount bracket to provide unparalleled stability. This system has a door mountable frame and comes with full extension soft close slides. PART # 5432-05CR
Side Bracket
Bottom Bracket
DESCRIPTION 2 Tier Chrome/Aluminum 5-3/8” x 22-1/4 D x 23-1/8” H
Our 548-06 system makes storing 2 liter bottles simple and accessible. This system is designed for base 9 cabinets.
5432-05CR 548-06CR
2” (51mm)
• Features universal brackets for right or left hand mounting. • Ball Bearing slides and a door mountable wire frame in white or chrome. PART # 548-06 548-06CR
COLOR White Chrome
19-1/2” (496 mm)
DESCRIPTION 5-1/2” W x 19-3/8” D x 19-1/2” H 5-1/2” W x 19-3/8” D x 19-1/2” H
4” (102 mm)
5-1/2” (492 mm)
19-3/8” (492 mm)
PREMIER CHROME WIRE KITCHEN STORAGE COOKWARE ORGANIZER Seven dividers for sauce pans or lids. Large basket space for larger pots. Larger unit has a large divider section for baking pans, cutting boards and Soft Close Slide. PART #
CABINET
5389-21CR
BASE 24
5389-33CR
BASE 36
WIDTH DEPTH HEIGHT WEIGHT 20-1/8” 22” 9-1/2” 19 lbs. (512mm) (559mm) (232mm) 32-1/8” 22” 9-1/2” 23 lbs. (816mm) (559mm) (232mm)
Shown in combination with 5333-33CR side mounted.
G-374
WOOD KITCHEN STORAGE All Wood Items Are Carb Phase II Compliant Made of birch/maple hardwood UV cured with clear finish
BASE & WALL FILLER ORGANIZERS WITH STAINLESS PANELS
The fillers feature full-extension ball bearing slides, black accessory hooks and pegs and stainless steel panels that provide endless storage customizing from storing pots and pans, cleaning accessories, various cooking utensils, keys, craft supplies and much more. One side features adjustable shelves One side features stainless steel panels
433-BF-9C 434-BF-6SS
BASE UNITS
PART # 434-BF-3SS 434-BF-6SS 433-BF-9C
434-WF-6SS
DESCRIPTION 3” Filler Organizer 6” Filler Organizer 9” Filler Organizer
DIMENSIONS 3” W x 23” D x 30” H 6” W x 23” D x 30” H 9” W x 23” D x 30” H
WALL UNITS
PART #
434-WF-3SS 434-WF-6SS 434-MB-KIT
DESCRIPTION DIMENSIONS 3” Perforated Filler 3”W x 11-1/8”D x 30”H Organizer 6” Perforated Filler 6”W x 11-1/8”D x 30”H Organizer 434 Message Board - comes with eraser, markers and marker holder
5PSP CR SERIES
CHROME BLIND CORNER OPTIMIZER This product by Rev-A-Shelf takes blind corner organization to a whole new level! The blind corner optimizer front baskets pull-out, then slide over to allow the rear baskets to be pulled out for total access to the items stored within.
5PSP-15-CR
5PSP-15-CR
5PSP-15-CR
15” Min. Cabinet Width opening • 20-1/4” Min. Inside Cabinet Depth • 21” Cabinet Height Opening PART # 5PSP-15-CR
DESCRIPTION Blind Corner Optimizer
DIMENSIONS 26-1/4” (667mm) W x 20-1/4” (514mm) D x 21” (533mm) H
Unit contains frame with 4 chrome baskets, 100 lb rated full extension, ball bearing slides, and hardware. Easy installation to the cabinet floor. Can be used for left or right corner.
G-375
WOOD KITCHEN STORAGE All Wood Items Are Carb Phase II Compliant Made of birch/maple hardwood UV cured with clear finish
BASE CABINET & WALL FILLER PULL-OUT SHELVES
Create a functional storage space behind those decorative panels with the new base and wall filler cabinets. Rev-A-Shelf created the whole cabinet that transforms decorative fillers into functional storage pullouts. The 432 Series is available for 3”, 6” and 9” base and wall cabinet applications and features adjustable shelves with chrome rails and full-extension ball bearing slides. Cabinet face not included. 432-WF-6C
432-BF-6C
432-WF-3C
432-BF-3C
BASE UNITS
WALL UNITS
PART # 432-BF-3C 432-BF-6C 432-BF-9C PART # 432-WF-3C 432-WF-6C 432-WF36-3C 432-WF36-6C 432-WF39-3C 432-WF39-6C 432-WF42-3C 432-WF42-6C
DESCRIPTION 3” Filler Organizer 6” Filler Organizer 9” Filler Organizer
DIMENSIONS 3” W x 23” D x 30” H 6” W x 23” D x 30” H 9” W x 23” D x 30” H
DESCRIPTION 30” Tall 3” Filler Organizer 30” Tall 6” Filler Organizer 36” Tall 3” Filler Organizer 36” Tall 6” Filler Organizer 39” Tall 3” Filler Organizer 39” Tall 6” Filler Organizer 42” Tall 3” Filler Organizer 42” Tall 6” Filler Organizer
DIMENSIONS 3” W x 11-1/8” D x 30” H 6” W x 11-1/8” D x 30” H 3” W x 11-1/8” D x 36” H 6” W x 11-1/8” D x 36” H 3” W x 11-1/8” D x 39” H 6” W x 11-1/8” D x 39” H 3” W x 11-1/8” D x 42” H 6” W x 11-1/8” D x 42” H
PULL-OUT SHELVING SYSTEM
Introducing the Wood Classic Adjustable Shelf Pull-Out with chrome rails designed for base 9”, 12”, 15” and 18” cabinets. The 448 series features our technologically advanced patent pending “tri-slides” for complete stability and adjustable door mount brackets providing up to 5” of flexibility for trouble-free installation on any door style. Shelves are adjustable. Installation is easy. From the underside of the cabinet simply screw the wood block to the bottom of the cabinet for complete stability
G-376
NEW TRI- SLIDE (patent pending)
NEW ADJUSTABLE DOOR MOUNT BRACKETS
PART # DIMENSIONS 448-BC-5C 5” W x 22-1/2” D x 25-1/2” H 448-BC-6C 6-1/2” W x 22-1/2” D x 25-1/2” H 448-BC-8C 8” W x 22-1/2” D x 25-1/2” H 448-BC-11C 11” W x 22-1/2” D x 25-1/2” H 448-BC-14C 14” W x 22-1/2” D x 25-1/2” H
WOOD KITCHEN STORAGE All Wood Items Are Carb Phase II Compliant Made of birch/maple hardwood UV cured with clear finish
Plastic Inserts Included
BASE WICKER BASKET PART #
Cloth liner included
EXTRA CLEAR PLASTIC LINERS WORKS PART # W/ PART#: WBI-15-10 4WB-15 WBI-18-10 4WB-18
DOOR MOUNT Contains door rack, vegetable oil treated cutting board & mounting screws. Overall height is 16-3/4”. PART # 4DMCB-15 4DMCB-18
DESCRIPTION Rack: 9-1/2”W x 8”H x 3”D Board: 7-7/8”W x 16”L x 1-1/4”D Rack: 12-1/2”W x 8”H x 3”D Board: 10-7/8”W x 16”L x 1-1/4”D
WOOD SINK BASE DOOR STORAGE
WEIGHT 7 lbs. 10 lbs.
DOOR MOUNT POLYETHYLENE CUTTING BOARD
This 4DMBC features a stylish wood and chrome support rack and an easy to clean, abrasive resistant, hygienic, non-stick Polyethylene cutting board.
MINIMUM DESCRIPTION OPENING Rack: 12-1/4”W x 8”H x 2”D 4DMCB-15P 13-1/2” Board: 9-3/4”W x 15-3/4”H x 5/8” D Rack: 15-3/4”W x 8”H x 2”D 4DMCB-18P 16-1/2” Board: 13-3/8”W x 15-3/4”H x 5/8”D PART #
DESCRIPTION WEIGHT Base 15 Wicker Basket max. inside width: 12-7/8” - 14-5/8” 11-1/4”W (286 mm) x 7-7/8”H (200 mm) x 21-1/4”D (540 mm) 5 lbs 4WB-15 Individual Pack: Contains (1) Wicker Basket, 2 side mount rails and 1 plastic liner. Base 18 Wicker Basket max. inside width: 15-7/8” - 17-5/8” 14-1/4”W (362 mm) x 7-7/8”H 7 lbs (200 mm) x 21-1/4”D (540 mm) 4WB-18 Individual Pack: Contains (1) Wicker Basket, 2 side mount rails and 1 plastic liner. Wicker Basket Set 4 pc. minimum 4WB-411-4 3.3 lbs. Set includes: (1) 4-1/2”W x 11-1/4”D x 4-1/2”H basket and cloth liner. Wicker Basket Set 4 pc. minimum 4WB-421-4 4.1 lbs. Set includes: (1) 4-1/2”W x 21-1/4”D x 4-1/2” H basket and cloth liner. Wicker Basket 4WB-1419-52 Includes: (1) 14-1/2”W x 19-1/4”D x 6 lbs. 11-1/4” H basket and cloth liner. Wicker Basket 4WB-1723-52 Includes: (1) 17-1/2”W x 22-3/4”D x 7.5 lbs. 11-1/4”H basket and cloth liner.
• Available for sink base sizes 30”, 36”, & 42” and features a removable polymer tray on the top shelf with new adjustable door mount brackets that provide installation flexibility up to 5”. PART # 4SBSU-15 4SBSU-18 4SBSU-21
DIMENSIONS 10-1/2” W x 5” D x 18-1/2” W 13-1/2” W x 5” D x 18-1/2” W 16-1/2” W x 5” D x 18-1/2” W
G-377
WOOD KITCHEN STORAGE All Wood Items Are Carb Phase II Compliant
VERTICAL FOIL RACK
Made of birch/maple hardwood UV cured with clear finish
Designed for 15”, 18” and 21” Wall cabinets this beautiful wood organizer brings your foil and storage bags within easy reach while freeing up valuable drawer and pantry space. Made from maple with chrome rails it is ideal for any decor and the patented adjustable mounting brackets ensure easy installation on various door styles.
Patented Adjustable Mounting Brackets ensure that your doors are not damaged
PART # DESCRIPTION DIMENSIONS 4WFR-15-1 Vertical Foil Rack for 15” Cabinet 10-1/8” W x 4” D x 8” H 4WFR-18-1 Vertical Foil Rack for 18” Cabinet 13-1/8” W x 4” D x 8” H 4WFR-21-1 Vertical Foil Rack for 21” Cabinet 16-1/8” W x 4” D x 8” H
MINIMUM CABINET OPENING 11” 13-3/4” 16-5/8”
DOOR MOUNT SPICE RACK
4SR-18
• Contains door mount spice rack and four screws. • Height between reaches is 8-5/8”.
Back View of adjustable brackets
PART # 4SR-15 4SR-18 4SR-21
Overall w/Standard 4” Shelf 3-5/8” Inside Rack Depth 2-1/4”
G-378
21-1/2”
INSIDE SHELF WIDTH 8-3/8” 11-3/8” 14-3/8” Depth 2-5/8”
DIMENSIONS 9-5/8” W x 3-1/2” D x 21-1/2” H 12-5/8” W x 3-1/8” D x 21-1/2” H 15-5/8” W x 3-1/8” D x 21-1/2” H
• Contains 3 adjustable shelves, 2 slotted standards and mounting screws standards are 3/4” W x 22” H x 3/4”D .
Rack Width 10-1/8” 13-1/8” 16-1/8”
Inside Rack Width 8-3/4” 11-3/4” 14-3/4”
3-1/8”
9-5/8” 12-5/8” 15-5/8”
ADJUSTABLE DOOR MOUNT SPICE RACK
Standards 3/4” W x 3/4” D x 25” H
3-5/8” Inside Rack Height 203/32”
Weight 2.5 lbs. 3 lbs. 3.5 lbs.
4ASR-18
Our storage organizers include patented brackets that offer up to an extra 5” of mounting adjustability. The AMB attachment is designed to extend mounting options to the thick portion of the door increasing installation flexibility and eliminating the need for sub-door panels. US PATENT NO: 7,204,569
Up to 5” of adjustability, just loosen screws, adjust, then retighten.
PART # DESCRIPTION 4ASR-31STD-20 31” Door Mount Spice Rack Standards 4ASR-37STD-20 37” Door Mount Spice Rack Standards
PART # DIMENSIONS 4ASR-15 10-1/8” W x 4” D x 25” H 4ASR-18 13-1/8” W x 4” D x 25” H 4ASR-21 16-1/8” W x 4” D x 25” H
DOUBLE PULL-OUT WASTE CONTAINERS
5349-18DM-2
5349-1527DM-2
PART # 5349-18DM-2 5349-18DM-217 5349-18-DM-2SS 5349-1527DM-2 5349-1527DM-217 5349-2150DM-217 5349-2150DM-2
5349-18DM-217
5349-1527DM-217
5349-18-DM-2SS
5349-2150DM-217
DESCRIPTION Two 35 qt. white polymer containers (plastic) Two 35 qt. Metallic silver polymer containers (plastic) Two 32 qt. Stainless steel containers Two 27 qt. white polymer containers (plastic) Two 27 qt. metallic silver containers (plastic) Two 50 qt. metallic silver polymer containers (plastic) Two 50 qt. white polymer containers (plastic)
5349-2150DM-2
DIMENSIONS 14-7/8” W x 22” D x 19-1/2” H 14-7/8” W x 22” D x 19-1/2” H 14-7/8” W x 22” D x 19-1/2” H 11-5/8” W x 22-3/4”D x 19-1/8” H 11-5/8” W x 22-3/4”D x 19-1/8” H 15-5/8” W x 22” D x 23-1/8” H 15-5/8” W x 22” D x 23-1/8” H
WASTE CONTAINER LIDS
This double 15 quart dark gray polymer pull-out waste container features built in handles for easy removal and is nestled in a heavy gauge chrome wire frame. The 5469 series features 18” bottom mount full extension self closing slides and door mount brackets. PART # 5469-15DM-2CR
DESCRIPTION 14” W x 18” D x 15-3/4” H
NOTE: Minimum inside cabinet width is 14-1/4” Minimum opening width is 13-3/4” Minimum opening height is 15-7/8”
TOP MOUNT PULL-OUT WASTE CONTAINERS with Rev-A-Motion
Rev-A-Shelf’s ground breaking Soft-Open/Soft-Close Rev-A-MotionTM waste containers are now available in an innovative Top-Mount application. The front, side and rear adjustable mounting brackets provide stability and easy installation. These products are constructed of solid maple and available in two sizes, Single 50 Qt. (for 18” full height base cabinets) and a Double 50 Qt. (for 21” full height base cabinets). They feature pre-assembled door mount brackets for easy one-step operation and rear adjustable mounting brackets for stability and easy installation.
Additional mending plate for frameless applications
Concealed Slides!
FITS INSET DOORS
Unique adjustable bracket is designed for 1-1/2”, 1-5/8”, and 1-3/4” Rev-A-Motion Slide system provides face frame applications and will adapt to frameless construction. 8” of assisted opening and closing. PART # DESCRIPTION WEIGHT Single 50 Qt. Containers 4WCTM-RM-1850DM-1 20 lbs. 15-1/4” W x 21-3/4” D x 21-3/4” H Double 50 Qt. Containers 4WCTM-RM-2150DM-2 24 lbs. 18-1/4” W x 21-3/4” D x 21-3/4” H
G-379
SINGLE PULL-OUT WASTE CONTAINERS RV SERIES price list and description
A
B
C
WEIGHT PART # DESCRIPTION PER CARTON RV-814PB 8-7/8”W x 15-5/8”D x 15-7/8”H Single 20 Qt. Waste Container 6 lbs. RV-20-52WH 20 Qt. Replacement Container - 8-3/8” W x 14-1/4” D x 15” H – RV-9PB 9-1/2”W x 22”D x 19-1/2”H Single 30 Qt. Waste Container 9.5 lbs. 6700-61-52 30 Qt. Replacement Container - 9-3/8” W x 15-3/8” D x 17-7/8” H – RV-9PBS 9-1/2”W x 22”D x 19-1/2”H Single 30 Qt. Waste Container w/full extension 9.5 lbs. RV-12PB 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container 10 lbs. RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H – RV-12PBS 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container w/full extension 10 lbs. PART # RV-12PBL
PART # RV-12PB-50 RV-50-52
DESCRIPTION 10-5/8”W x 22”D x 20-3/8”H Single 35 Qt. Waste Container w/Lid
DESCRIPTION 11-1/4”W x 22”D x 23-1/4”H Single 50 Qt. Waste Container 50 Qt. Replacement Container - 11-1/4” W x 15-5/8” D x 21-5/8” H
WEIGHT PER CARTON 10 lbs. WEIGHT PER CARTON 10 lbs. –
D
PART # RV-14PB-S RV-20-52WH
DESCRIPTION 14-5/8”W x 16”D x 16-3/8”H Single 20 Qt. Waste Container 20 Qt. Replacement Container - 8-3/8” W x 14-1/4” D x 15” H
WEIGHT PER CARTON 11 lbs. –
E
PART # RV-18PB-1 RV-35-52
DESCRIPTION 14-7/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H
WEIGHT PER CARTON 13 lbs. –
F
WEIGHT PART # DESCRIPTION PER CARTON RV-18PB2-S 14-3/8”W x 22”D x 19-1/4”H Double 35 Qt. Waste Container w/full extension 14 lbs. RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H –
WASTE CONTAINER LIDS PART # RV-35-LID-1 RV-35-LID-17-1 RV-35-LID-18-1 RV-50-LID-1 RV-50-LID-17-1
DESCRIPTION 35 QT. Waste Container Lid-White 35 QT. Waste Container Lid-Metallic Silver 35 QT. Waste Container Lid-Black 50 QT. Waste Container Lid-White 50 QT. Waste Container Lid-Metallic Silver
WASTE CONTAINERS WITH FULL EXTENSION SLIDES WEIGHT PART # DESCRIPTION PER CARTON RV-12KD-17CS 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container-w/full extension 12 lbs. RV-15KD-17CS 11-13/16”W x 22-1/4”D x 19-1/8”H Double 27 Qt. Containers-w/full extension 14 lbs. RV-1024W 27 Qt. Replacement Container - 11-3/8”W x 11-3/8”D x 17-3/4”H – RV-18KD-17CS 14-3/8”W x 22”D x 19-1/4”H Double 35 Qt. Waste Container-w/full extension 15 lbs. RVDM17KIT Heavy Duty Door Mount Kit in Metallic Silver (Includes Euro Adapter Kit) 2 lbs.
G-380
SINGLE PULL-OUT WASTE CONTAINERS RV SERIES
This popular waste container series is available in a variety of sizes to accommodate almost any cabinet space. Regarded as the best in the industry, the RV Series features a heavy-duty wire frame construction; 3/4 or full-extension ball bearing slides and easy bottom mount installation with just four screws. These durable pull-out waste containers are packaged fully assembled and carry the standard Rev-A-Shelf LIFETIME GUARANTEE.
A
E
C
B
F
RV-DM KIT
All RV series waste containers can be attached to the cabinet door for an easy one step process with the heavy-duty door mount kit. This system is considered the best in the industry with a six way adjustable door-mounting bracket for easy installation and simple job site adjustments. The RV-DM kit includes a complete set of brackets, fasteners and spacers for installation on any door style eliminating the need for a sub door panel.
D
F
RV-12PBS W/RV-DM-KIT
THIS KIT CAN BE ADDED TO ALL RV SERIES WASTE BINS AND HAMPERS
Feature: RV-DM Brackets can be adapted to any door application without need for sub-door.
CONTAINS: 2- Product Members, 1- set-door brackets (1 left & 1 right), 2- 1/4” x 1/2” bolts, 2- 1/4” x 1/2” bolts w/washers, 4- #10 x 1/2” truss head screws, 4-nylock nuts Spacer Kit: 2- 1/2” x 1” bolts, 2- 1/4” x 1” bolts w/washers, 4- 3/8” spacers
* RV-8PB requires Euro Adapter Kit. Part #RVEUROADAPTORKIT52 PART # DESCRIPTION RV-DM-KIT Heavy Duty door mount kit RVEUROADAPTORKIT52 Euro Slide adapter kit for RV-8PB
FINISH White Enamel --
SETS PER CARTON 1 1
WEIGHT PER CARTON 2 lbs. 1 lb. has a 35% restock fee.
G-381
SINGLE PULL-OUT WASTE CONTAINERS It’s all about the smooth sliding system with the 5349 Series. This assortment of single and double stainless steel or polymer waste containers features heavy-duty brushed aluminum Soft Close Slides that provide exceptional support and stability eliminating that side-to-side movement and a fully adjustable door mount frame.
5349-15DM-117
5349-15DM-1
PART # 5349-15DM-1 5349-15DM18-1 5349-15DM-117 5349-15DM18-117 5349-1550DM-1 5349-1550DM-117 5349-15DM-1SS 5349-15DM18-1SS 5349-2150DM-217
5349-1550DM-1
5349-1550DM-117
DESCRIPTION
One 35 qt. white polymer container (plastic) 10-3/4”W x 22”D x 19-1/2”H One 35 qt. white polymer container (plastic) 10-3/4”W x 18”D x 19-1/2”H One 35 qt. Metallic Silver polymer container (plastic) 10-3/4”W x 22”D x 19-1/2”H One 35 qt. Metallic Silver polymer container (plastic) 10-3/4”W x 18”D x 19-1/2”H One 50 qt. white polymer container (plastic) 11-1/4”W x 22”D x 22-3/4”H One 50 qt. Metallic Silver polymer container (plastic) 11-1/4”W x 22”D x 22-3/4”H One 32 qt. Stainless Steel container 11-1/4”W x 22”D x 19-1/2”H One 32 qt. Stainless Steel container 11-1/4”W x 18”D x 19-1/2”H Double 50 qt. Metallic Silver Polymer Container 14-13/16”W x 22-1/8”D x 22-15/16”H
5349-15DM-1SS
5349-2150DM-217
STAINLESS STEEL UNDER THE SINK MOUNT WASTE CONTAINER Introducing Rev-A-Shelf’s newest addition to the waste container family, the stainless steel sink base pull-out waste container. Ideal for kitchen, vanity and wet bar sink base cabinets. Made to fit conveniently in the limited spaces around existing plumbing. Features two separate stainless steel containers (one 10 liter bin and one 20 liter bin), a covered lid, built in handles for easy removal, full extension ball bearing slides and is available with or without a door mountable frame. PART #
DESCRIPTION Under Sink Mount Waste Container 10-1/4” W x 18-3/4” D x 15-3/16” H Door Mount Under Sink Waste Container 8-785-30-DM2SS 10-1/4” W x 18-3/4” D x 15-3/16” H 8-785-30-2SS
8-785-30-2SS
Contains: Mounting frame, full-extension slides, lid, 2 containers and screws. 8-785-30-DM2SS includes a door mount bracket.
G-382
8-785-30-DM2SS
PULL-OUT WASTE CONTAINERS BOTTOM MOUNT SERIES All Wood Items Are Carb Phase II Compliant Made from solid wood construction, the Bottom Mount Pull-Out Waste Containers are available in a single 35 qt. or double 35 qt. variety. The 4WC Series encases the containers in a durable wood base at the bottom of the cabinet to allow easy retrieval of the polymer waste bins and features full-extension ball bearing slides with pre-assembled door mount brackets. PART #
DESCRIPTION one 35 qt. container set 4WC-15DM-1 11-1/4”W x 19-1/4”H x 21-3/4”D two 35 qt. containers set 4WC-18DM-2 14-1/4”W x 19-1/4”H x 21-3/4”D 35 Qt. Replacement Container RV-35-52 14-1/4” W x 10-1/2” D x 17-7/8” H
4WC-15DM-1
4WC-18DM-2
TOP MOUNT SERIES Made from solid wood construction, the Top Mount Pull-Out Waste Containers are available in a single 35 qt. and 50 qt., double 27 qt., double 35 qt. and 50 qt. variety. The 4WCTM Series is designed for absolute sturdiness with front side mounting, rear adjustable mounting brackets for variances in cabinet depth, pre-assembled door mounting brackets and full-extension 150 lbs. rated over-travel-slides. In addition, the single waste container system includes a short polymer bin that provides an extra storage space for garbage bags.
4WCTM-12DM-1
4WCTM-1550DM-1
4WCTM-15DM-2
4WCTM-18DM-2
PART #
4WCTM-27-4
DESCRIPTION one 35 qt. container 12”W x 17-7/8”H x 22”D one 50 qt. container & small polymer bin 4WCTM-1550DM-1 18”W x 21-3/4”H x 22-5/8”D (door mount) two 27 qt. containers 4WCTM-15DM-2 12”W x 17-3/4”H x 22-7/8”D two 35 qt. containers 4WCTM-18DM-2 15”W x 17-7/8”H x 22”D two 50 qt. containers 4WCTM-2150DM-2 18”W x 21-3/4”H x 22-13/16”D 24”W x 22-13/16”D x 18”H 4WCTM-27-4 top mount wood frame, full extension slides 4 x 27 Qt. Container 27 Qt. Replacement Container Only RV-1024W 11-3/8”W x 11-3/8”D x 17-3/4”H 35 Qt. Replacement Container Only RV-35-52 14-3/8”W x 15-3/8”D x 17-7/8”H 50 Qt. Replacement Container Only RV-50-52 11-1/4”W x 15-5/8”D x 21-5/8”H 4WCTM-12DM-1
4WCTM-2150DM-2
FULLY ASSEMBLED Contains: 1, 2 or 4 container(s), full-extension slides, and built in door mount brackets 4WCTM-27-4 is not a door mount unit.
SPACER KIT Use for custom face frame installations PART # 4WCTM-SP-KIT
DESCRIPTION WEIGHT 1-1-/2”W x 22-1/4”D x 2-7/16”H 5 lbs. Wood Finish
G-383