2012
LAMINATES & VENEER SHEETS www.panelplus.co
P
pgs. 668-683
FusionTech Fusiontech & fusiontech swirl are exciting design-forward finishes that create visually stunning results. Fusion swirl is available in nominal 4’ x 10’ aluminum sheets mechanically etched & fused with multiple colors that dance in the night. Fusiontech aluminum 4’ x 8’ sheets and imaging using fusiontech technology. Both are ideal for store fixture, display, hospitality, architectural & interior design applications. • Fusiontech - pg. 681 • Fusiontech Swirl - pg. 681
Laminates & Veneer Sheets
Mirroflex™ Innovative designer patterns are perfect for use on walls, furniture, displays, ceilings and many more interior applictions. • 3D Embossed Thermoplastic Sheets pgs. 676-677 • Flexlam Smooth Thermoplastic Sheets pg. 674
Nu Metal™
High Pressure Laminates Nu Metal™ High Pressure Laminates have the ability to transform a space into the visually remarkable...Sheet size is typically 4’ x 8’ in aluminum, copper & real stainless steel; featuring embossing, handpainted techniques, etching & other innovative techniques. High quality & design solutions are it’s tradmarks.
Kerfkore Kerfkore 4’ x 8’ sheets can be formed into curves with a radii as tight as 3-1/2”! Adhere veneers, HPL, sheet metals & other semirigid materials to the kerfed board to create cabinetry, reception areas, columns, furniture & more with graceful curves. Available from 1/4” to 3/4” thicknesses with groves running 8’ direction. • Econokore - pg. 683 • Flexboard - pg. 683 • Kerfkore - pg. 682 • Timberflex - pg. 683 • Ultralite - pg. 682
Mirroflex™ Door Skins Turn old flat panel doors new again without the expense and time consuming installation. Available in 12 finishes with an easy peel & stick packing. pg. 672
Roll-A-Lam Endless applications are possible with this extremely flexible peel & stick laminate. Four foot wide rolls are offered in 5 metallic finishes and 2 patterns. pg. 673
• Copper Collection - pg. 680 • Mesh - pg. 679 • Real Stainless Steel - pg. 679 • Smooth & Embossed Design Collection - pg. 678 • Unique Art Collection - pg. 680
Veneer Sheets Flexible Stone Veneer Sheets Veneer sheets create the look of solid surface materials while drastically reducing the cost of materials, installation and shipping. From genuine stone and wood to thermoplastic laminates and metals. Veneers are available in a wide range of colors, patterns and textures. Many are also paintable for flexible applications. • Flexible Wood (Paper Backing) - pg. 670 • Flexible Wood Over Wood - pg. 671
This exciting new product creates the look of solid stone at a fraction of the weight & cost. 2’ x 4’ sheets are made from natural stone, capturing all the beauty & texture found in slates & micas. Lightweight & flexible, the 10 finishes are perfect for interior & exterior applications, cabinets, backsplashes, kitchens, bathrooms, signage, marine & RV, furniture & more. pg. 669
P-668
FLEXIBLE STONE VENEER SHEETS 2’ x 4’ approximately 1 MM to 5 MM thick Stone Veneer Sheets are made from natural stones. This means each sheet will vary the same way that natural slates and micas do. Some colors, like Copper, Terra Red, Multi-Color and Silver Shine are more standard in color but can vary in texture. Indian Autumn, Sanjayani White and Jeera Green can have a wide range of texture and color. These variations also add to the uniqueness of the stones.
N EW
!
Applications
Product Features
• Architectural • Interior & Exterior • Doors & Cabinets • Furniture • Trim & Backsplashes • Marine & RV • Kitchens • Bathrooms • Flooring • Signage
• Can be applied over: concrete, ceramic, wood, metal, plywood, fiberglass, backer board, tile, dry wall, painted surfaces, MDF, Masonite®, door skin, cabinetry and many other substrates as well. • Lightweight • Flexible • Colorful • Unique stone veneer with unlimited application possibilities. • The introduction of this exciting new material addresses a large need for a flexible, adaptable, durable and weather resistant stone veneer.
BLACK FSV24-01
Copper FSV24-02
Dark Green FSV24-03
GOLDEN FSV24-04
Indian AutUMN FSV24-05
JEERA GREEN FSV24-06
Multi color FSV24-07
SANJAYANI WHITE FSV24-08
Silver Shine FSV24-09
Terra red FSV24-10
Adhesive FSV-ADH
One tube (10.2 oz.) per 4 sq. ft.
FSV-Binder Samples A complete set of all 10 Loose 4” x 6” finishes. Each 4” x 6” piece is provided in a clear OR pieces of each color are protective sheet cover inside a available (limit 2). hard cover binder.
P-669
WOOD VENEER SHEETS- 10 MIL PAPER BACKING • 1/42” THICK GENUINE WOOD VENEER • BOOK MATCHED • SANDED & TENDERIZED • VENEER IS PERMANENTLY BONDED UNDER HEAT AND PRESSURE TO THE PAPER BACKING.
Products On This Page Are Book Matched
BOOK MATCHING
2 Ft. x 8 Ft. Sheets • No Adhesive PART # CV28N-CH CV28N-HC CV28N-MP CV28N-RO CV28N-WAL CV28N-WA CV28N-WB CV28N-WO
WOOD SPECIES Cherry Hickory Maple Red Oak Walnut White Ash White Birch White Oak
TYPE OF CUT Flat Flat Flat Flat Flat Flat Rotary Flat
4 Ft. x 8 Ft. Sheets • No Adhesive PART # CV48CH CV48HC CV48MP CV48RO CV48WAL CV48WA CV48WB CV48WO
WOOD SPECIES Cherry Hickory Maple Red Oak Walnut White Ash White Birch White Oak
TYPE OF CUT Flat Flat Flat Flat Flat Flat Rotary Flat
Other Exotic 2 Ft. x 8 Ft. Sheets • No Adhesive PART # CV28N-AM CV28N-AM-Q CV28N-AMR CV28N-AN CV28N-AN-QF CV28N-BE CV28N-MBE-H CV28N-MBE-M CV28N-BUT CV28N-CM CV28N-EBY-Q CV28N-KP CV28N-PEC CV28N-RO-RC CV28N-SAP-Q CV28N-TK CV28N-TK-Q CV28N-WA-Q CV28N-WO-RC CV28N-ZW
WOOD SPECIES African Mahogany African Mahogany African Mahogany Anigre Anigre Beech Birdseye Maple Birdseye Maple Butternut Curly Maple Ebony Knotty Pine Pecan Red Oak Sapeli Teak Teak White Ash White Oak Zebrawood
TYPE OF CUT Flat Quarter Figured Ribbon Flat Quarter Figured Flat Heavy Medium Flat Flat Quarter Flat Flat Rift Quarter Flat Quarter Quarter Rift Flat
OPTIONAL GLUE SHEET AVAILABLE: 2 Ft. High Roll x Any Amount Of Running Feet PART # GLUE-SHT
2 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive PART # CV28CH CV28HC CV28MP CV28RO CV28WAL CV28WA CV28WB CV28WO
WOOD SPECIES Cherry Hickory Maple Red Oak Walnut White Ash White Birch White Oak
TYPE OF CUT Flat Flat Flat Flat Flat Flat Rotary Flat
4 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive PART # CV48A-CH CV48A-HC CV48A-MP CV48A-RO CV48A-WAL CV48A-WA CV48A-WB CV48A-WO
WOOD SPECIES Cherry Hickory Maple Red Oak Walnut White Ash White Birch White Oak
TYPE OF CUT Flat Flat Flat Flat Flat Flat Rotary Flat
Other Exotic 4 Ft. x 8 Ft. Sheets • No Adhesive PART # CV48AM CV48AM-Q CV48AMR CV48AN CV48AN-QF CV48BE CV48MBE-H CV48MBE-M CV48BUT CV48CM CV48HM CV48KP CV48PEC CV48RO-RC CV48TK CV48TK-Q CV48WA-Q CV48WO-RC CV48ZW
WOOD SPECIES African Mahogany African Mahogany African Mahogany Anigre Anigre Beech Birdseye Maple Birdseye Maple Butternut Curly Maple Honduras Mahogany Knotty Pine Pecan Red Oak Teak Teak White Ash White Oak Zebrawood
TYPE OF CUT Flat Quarter Figured Ribbon Flat Quarter Figured Flat Heavy Medium Flat Flat Flat Flat Flat Rift Flat Quarter Quarter Rift Flat
Please Note: Do not apply to sheet rock or drywall. Any exterior surface plastic laminate or melamine board. Apply 2 coats of contact adhesive to porous substrates.
P-670
WOOD OVER WOOD Wood over wood laminate is composed of two wood veneer faces permanently bonded with the grain of the face running perpendicular to the grain of the back. The result is a dimensionally stable product which minimizes the wood veneer’s tendency to expand and contract across the grain.
• 2 ft. or 4 ft. x 8 ft. sheets • .035 thickness • No bubbling • No ridging • No phenolic or foil backer lines • Flexibility • 100% surface sanded • With or without adhesive
2 Ft. x 8 Ft. Sheets • No Adhesive
2 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive
WOOD SPECIES TYPE OF CUT Anigre Quartered Figured Ash Flat Cherry Flat Honduras WOW28HM Flat Mahogony WOW28MP Maple Flat WOW28RO Red Oak Flat WOW28WAL Walnut Flat WOW28WB White Birch Rotary WOW28WO White Oak Flat
WOOD PART # SPECIES TYPE OF CUT WOW28A-AN-Q Anigre Quartered Figured WOW28A-AH Ash Flat WOW28A-CH Cherry Flat Honduras WOW28A-HM Flat Mahogony WOW28A-MP Maple Flat WOW28A-RO Red Oak Flat WOW28A-WAL Walnut Flat WOW28A-WB White Birch Rotary WOW28A-WO White Oak Flat
PART # WOW28AN-Q WOW28AH WOW28CH
4 Ft. x 8 Ft. Sheets • No Adhesive
4 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive
WOOD PART # SPECIES TYPE OF CUT WOW48AN-Q Anigre Quartered Figured WOW48AH Ash Flat WOW48CH Cherry Flat Honduras WOW48HM Flat Mahogony WOW48MP Maple Flat WOW48RO Red Oak Flat WOW48WAL Walnut Flat WOW48WB White Birch Rotary WOW48WO White Oak Flat
WOOD PART # SPECIES TYPE OF CUT WOW48A-AN-Q Anigre Quartered Figured WOW48A-AH Ash Flat WOW48A-CH Cherry Flat Honduras WOW48A-HM Flat Mahogony WOW48A-MP Maple Flat WOW48A-RO Red Oak Flat WOW48A-WAL Walnut Flat WOW48A-WB White Birch Rotary WOW48A-WO White Oak Flat
TYPES OF VENEER CUTS
The manner in which veneers are cut is an important factor in producing the various visual effects obtained. Two logs of the same species, but with their veneers cut differently, will have entirely different visual characteristics even though their colors are similar. Other Types Of Veneer Matches Available ROTARY CUT
FLAT CUT
HALF ROUND CUT
QUARTER CUT
Also Available 20 Mil
RIFT CUT
RANDOM MATCHING
Please Note: Do not apply to sheet rock or drywall. Any exterior surface plastic laminate or melamine board. Apply 2 coats of contact adhesive to porous substrates.
SLIP MATCHING
P-671
MIRROFLEX™ DOOR SKINS Designed to apply over existing flat panel doors for a new, fresh look without the expense. Skip the time consuming installation and sending old doors to the landfill with this environmentally friendly solution.
N EW
!
36” & 48” Wide x 84” High Product Feature
• Material: Thermoplastic • Peel & Stick Backing • Class A Fire Rated • High Impact and Chemical Resistant • UV Stability • Custom formed 3D door skins are available with a 10 pc. minimum (please inquire).
Before MirroFlex Door Skin
After MirroFlex Door Skin
Basic Finish
MDS3684-*
Light Oak (LO)
MDS4884-*
Light Maple (MO)
Chestnut Apple (CA)
Espresso Apple (EA)
Advanced Finish
MDS3684-*
Light Cherry (LC)
Medium Cherry (MC)
Medium Walnut (MW)
Don’t send doors to landfills. Remodel them with Door Skins!
MDS4884-*
Clove Cherry (CC)
Dark Walnut (DW)
Medium Oak (MO)
Textured Finish
MDS3684-*
MDS4884-*
Wenge (W)
P-672
Light Walnut (LW)
How to order: Use Part # above plus finish code (ex: MDS3684-LO)
LAMINATE ON A ROLL WITH ADHESIVE
R A L oll~
~
am
PRODUCT FEATURES:
• 48” wide roll x 100’ long. • Sold by the square foot (must be purchased in a minimum of 4 sq. ft. increments). • .03 thick styrene substrate.
4 FT. WIDE ROLL UP TO 100 FT. LONG!!! LAMINATES ON ONE CONTINUOUS ROLL WITH A SIMPLE PEEL & STICK ADHESIVE
NOW AVAILABLE FROM STOCK:
•mirrored Finish •brushed Steel •brushed Copper •diamond Plate •engine Turned •antique Brass •oil Rubbed Bronze
• PSA backing (Apply to a clean smooth surface only).
• F inishes are scratch & chemical resistant and come with a peelback protective coating. • This material is extremely flexible, which makes it easy to work with and the applications are endless. • Can be easily cut with a utility knife (Always make cut on decorative side).
Easy Peel and Stick GREAT FOR:
RESURFACING, BARS, DISPLAY CASES, BACK DROPS, AND SO MUCH MORE!
Mirrored Finish
Recommended for interior use only.
PART # RL-0108-MS RL-0113-BS RL-0055-BC RL-0311-DP RL-0310-ET RL-0308-AB RL-0423-ORB
DESCRIPTION Mirrored Finished Brushed Steel Brushed COPPER Diamond Plate Diamond Pattern 1” Long Engine Turned Circle Diameter Approximately 2” ANTIQUE BRASS OIL RUBBED BRONZE
Brushed Steel
1”
Brushed Copper Diamond Plate
• It’s essential that a primer (sealer) be applied to the substrate prior to applying the peel & stick laminate. • For larger applications, we strongly recommend testing prior to installing. Samples are available please inquire.
2” Engine Turned Antique Brass
v Free Samples Available v
H EASY HANDLING
H EASY SHIPPING
Oil Rubbed Bronze
H EASY TO USE
H EASY TO CLEAN
P-673
FLEXLAM
Flexible Thermoplastic Laminate Sheets 4’ W x 8’ H x .030” Thick
Available With & Without Adhesive With Flexlam, you can throw all of your surfacing applications a curve. Ideal for store fixtures, furniture displays, signage, cabinetry and trade show exhibits.
• Sheets all come with a protective peel off coating. • Cold forms to as small as a 3” radius • Smoothly follows inside and outside radius. •M ay be fabricated with all traditional woodworking tools. • Shatterproof and scratch resistant
• Sheets roll for UPS Shipping • Designed for vertical applications; however, suitable for low traffic horizontal surfaces. • All sheets must be cut on face (finish) side only.
Recommendation:
If purchasing without adhesive, use a water-based contact cement. Other adhesive products may work but you must first check with the adhesive manufacturer to ensure it is compatible with styrene/PVC. (Core is specified below)
How To Order:
Mirror
• For Non-Adhesive Use Part #- FLS48-30-* Plus Finish Code (ex: FLS48-30-BA) • For Adhesive Use Part #- FLS48A-30-* Plus Finish Code (ex: FLS48A-30-BA)
ARGENTS - dyed pvc core with pigment Argent finishes have color throughout so scratches are less visible. They are perfect for walls in high traffic areas.
Argent Gold (AG)
Argent Bronze (AB)
Argent Silver (AS)
Argent Copper (AC)
METALLICS – Clear pvc core N EW ! Brushed Aluminum (BA)
Oil Rubbed Bronze (ORB)
Brushed Nickel (BN)
Brushed Copper (BC)
Mirror Gold (MIRG)
Mirror (M)
Mirror Green (MGR)
Mirror Blue (MB)
Mirror Red (MR)
patinas – clear pvc core
N EW Muted Gold (MG)
Crosshatch Silver (CS)
Bronze Fantasy (BF)
Cracked Copper (CC)
Travertine (TRA)
N EW Copper Fantasy (CF)
Moonstone Copper (MC)
Bermuda Bronze (BB)
N EW Smoked Pewter (SP)
P-674
!
Galvanized (GAL)
!
Antique Bronze (ANTB)
Sheets are available in different thicknesses, please inquire.
!
FLEXLAM Flexible Thermoplastic Laminate Sheets 4’ W x 8’ H x .030” Thick
Available With & Without Adhesive
How To Order:
To Order Wood Grains
• For Non-Adhesive Use Part #- FLS48-30-* Plus Finish Code (ex: FLS48-30-WC) • For Adhesive Use Part #- FLS48A-30-* Plus Finish Code (ex: FLS48A-30-WC)
To Order Specialty
• For Non-Adhesive Use Part #- FLS28-40-* Plus Finish Code (ex: FLS28-40-ET) • For Adhesive Use Part #- FLS28A-40-* Plus Finish Code (ex: FLS28-40-ET)
Wood Grains – CLEAR PVC CORE
Washed Oak (WO)
Light Maple (LM)
Pearwood (PW)
Welsh Cherry (WC)
Engine Turn
sPECIALTY – 2’ x 8’ x .040 thick – BLACK STYRENE CORE
Carbon Fiber (CARF)
Gloss Black (GB)
Holographic (HO)
Carbon Weave (CARW)
Engine Turn (ET)
STRUCTURE PLASTIC PERFORATED SHEET Sheet Size: 4 ft. x 8 ft. x .030” Thick
Unlike conventional perforated metal sheets, structure plastic perforated sheets are totally unique! • Supplied with clear protective cover on face. • Extremely flexible. • Ease of fabrication - may use razors, knives, saws...even scissors! Alignment of hole punches may not be exact within the sheet, due to production process. PRODUCT IS INTENDED FOR DECORATIVE PURPOSES ONLY!!! May not be used to cover a piece of pegboard.
PERF-RD7 Design
(Shown in Argent Silver) (9/32” dia. holes on 1” centers)
1”
PART # PERF-48R-BS PERF-48R-AS PERF-48R-AG PERF-48R-AC
9/32”
FINISH THICK Brushed Stainless .040 Argent Silver .030 Argent Gold .030 Argent Copper .030
PERF-SQ8 Design
(Shown in Argent Silver) (5/16” squares on 1” center)
1”
5/16”
PART # PERF-48S-BS PERF-48S-AS PERF-48S-AG PERF-48S-AC
FINISH Brushed Stainless Argent Silver Argent Gold Argent Copper
THICK .040 .030 .030 .030
PLEASE NOTE: Finishes as shown are not necessarily true to the actual laminate. We recommend requesting a sample prior to ordering.
P-675
PLASTIC EMBOSSED 4’ x 8’ SHEETS 3D structures are decorated thermoplastic panels that are fused with color for added effect. Many designs feature a unique overlap system that makes installation easy and hides the seams. 3D structures are flexible enough to be rolled for UPS shipping, yet are completely rigid when laminated. They are impact, chemical, abrasion, U.V., and stain resistant and are Class A Fire Rated. APPLICATIONS:
Walls • Furniture • Display Fixtures • Wainscoting • Ceilings • Many Other Interior Applications
• Thickness: .030” • Sheets are supplied with a protective peel coat. • Most can be supplied with a pressure sensitive adhesive backing - please inquire. • Must use water based contact adhesive such as 3M #30NF Fastbond Series. Sahara
Diamond Plate PES48-DP-*
CASCADE
QUILTED
PES48-CAS-*
N EW
PES48-QUI-*
! Cascade
RIB 1
PES48-RIB1-*
WEAVE * PES48-WEA-*
QUADRO PES48-QUA-*
* CELESTIAL PES48-CEL-*
N EW
!
Rib 2
PES48-RIB2-*
N EW
!
LINES * RANDOM PES48-RL-*
DOME 1
PES48-DOME1-*
N EW
SOUTH BEACH PES48-SOB-*
!
N EW
!
SAHARA PES48-SAH-*
N EW
P-676
!
* WAVATION PES48-WAV-*
N EW
MOJAVE
CHocolate Square
PES48-MOJ-*
!
N EW
Please specify when ordering vertical (v) or horizontal direction (h) NOTE: Minimums may apply
PES48-CHO-*
!
N EW
!
For all finishes, please see page 677.
PLASTIC EMBOSSED 4’ x 8’ SHEETS APPLICATIONS:
Walls • Furniture • Display Fixtures • Wainscoting • Ceilings • Many Other Interior Applications
• Thickness: .030” • Class A Fire Rated
Random Lines
DOME 2
OVALS
PES48-DOME2-*
N EW
MiNI QUADRO
PES48-OV-*
N EW
!
PES48-MQUA-*
N EW
!
! Dogwood
DOGWOOD
Gobi
PES48-DOG-*
N EW
N EW
!
Celtic Weave
PES48-HAM-*
N EW
!
N EW
!
!
Mini dome
PES48-CW-*
N EW
Tread Plate *TriplePES48-TTP-*
STRIKE
PES48-GOBI-*
PES48-MD-*
N EW
!
!
Celtic Weave
ALL OTHER FINISHES N EW
How to order: Use Part # above plus finish code (ex: PES48-DP-WH)
CORE FINISHES
!
**Travertine (TRA)
N EW
Mirror Gold (MIRG)
**Bronze Fantasy (BF)
**Muted Gold (MG)
Brushed Copper (BC)
Brushed White Paintable Aluminum (BA) (WH)
*
!
**Brushed Nickel (BN)
N EW
Oil Rubbed Bronze (ORB)
!
**Antique Bronze (ANTB)
N EW
**Galvanized (GAL)
Argent Gold (AG)
**Cracked Copper (CC)
**Smoked Pewter (SP)
Argent Copper (AC)
**Copper Fantasy (CF)
**Moonstone Copper (MC)
!
Not Available
Mirror (M)
Argent Silver (AS)
**Crosshatch Silver (CS)
Argent Bronze (AB)
* Not Available
Core finishes available to ship normally within 3-5 business days. NOTE: All other finishes may have a minimum order requirement and extended lead time. Please inquire. Argent finishes have color throughout so scratches are less visible. They are perfect for walls in high traffic areas. **Now available Tuffcote™ on selected finishes. A revolutionary protection shield that offers superior durability and scratch resistance.
**Bermuda Bronze (BB)
P-677
NUMETAL™ HIGH PRESSURE LAMINATE NuMetal™ is real aluminum, stainless steel or copper foils laminated to a phenolic backing (phenolic is layers of impregnated Kraft paper bonded together). NuMetal™ is recommended for all vertical and light duty horizontal applications.
N EW
!
Brushed Aluminum Balloon
STANDARD and embossed designs - 4’ x 8’ Sheets x .035” Thick BA
Brushed Aluminum NM48-STD-BA
BB
Brushed Brass NM48-STD-BB
BS
PB
Brushed Stainless
Polished Brass
NM48-STD-BS
NM48-STD-PB
PA
Polished Aluminum NM48-STD-PA
MILL
Mill Aluminum
NM48-STD-MILL
Embossed Design
Corrugated
NM48-EMB-COR-BA NM48-EMB-COR-MILL NM48-EMB-COR-BS
Balloon
NM48-EMB-BAL-BA
Square
NM48-EMB-SQU-BA
REED COLLECTION - 4’ x 8’ Sheets
Antique Pewter Reeds (.050” Thick) NM48-EMB-REED-AP
P-678
Antique Copper Reeds (.050” Thick) NM48-EMB-REED-AC
Brushed Aluminum Reeds (.035” Thick) NM48-EMB-REED-BA
Brushed Stainless Reeds (.035” Thick) NM48-EMB-REED-BS
NUMETAL™ HIGH PRESSURE LAMINATE Real Stainless Steel Collection - 4’ x 8’ Sheets x .050” Thick
N EW
!
This collection retains all the properties of stainless steel. It is constructed with an ultra thin layer of stainless steel with standard HPL backing and allows standard woodworking tools to be used in fabrication.
Brushed
Diamond Plate
Rondo
NM48-RSS-DP
Diamond Plate
(Aluminum, .035 Thick) NM48-ALU-DP
NM48-RSS-RON
Brushed
Rondo
Radial
NM48-RSS-BRU
(Aluminum, .035” Thick) NM48-ALU-RON
NM48-RSS-RAD
MESH - 4’ x 8’ Sheets The latest trends are represented in these combinations of embossed designs and finishes.
Black Aluminum Mesh
Black Aluminum Mesh (.040” Thick) NM48-MESH-BK
Antique Pewter Mesh (.050” Thick) NM48-MESH-AP
Antique Copper Mesh (.050” Thick) NM48-MESH-AC
Brushed Aluminum Mesh (.040” Thick) NM48-MESH-BA
Brushed Stainless Steel Mesh (.040” Thick) NM48-MESH-BS
P-679
NUMETAL™ HIGH PRESSURE LAMINATE COPPER COLLECTION - 4’ x 8’ Sheets x .050” Thick
Antique Fine Hammered Copper
Matte Copper NM48-CC-MC
Filigran Antique Copper NM48-CC-FAC
Antique Copper Ore NM48-CC-ACO
N EW
!
Each copper laminate sheet is protected with a high quality lacquered top coat and comes with clear protective film.
Antique Fine Hammered Copper
Fine Hammered Copper NM48-CC-FHC
NM48-CC-AFHC
Unique Art Collection - 4’ x 8’ Sheets x .050” Thick These laminates are hand painted by artists using techniques that allow for repeatability. Unique Art is protected with a high quality lacquer process to ensure durability.
Unique Art Berlin
Melbourne
Unique Art Berlin
NM48-UAC-BERLIN
Unique Art Cairo
NM48-UAC-CAIRO
P-680
Patina Onyx
NM48-UAC-ONYX
Patina Autumn Leaves NM48-UAC-AUTLEAVES
Patina Esmeralda
NM48-UAC-ESMERALDA
FUSION FusionTech - 4’ x 8’ Sheets x .032” Thick
N EW
!
FusionTech is a proprietary infused color and coating process on un-backed aluminum. Sheets are coated with a highly scratch resistant UV stable coating and then the images are added using the FusionTech infused color process
Red Rust
Zebrano
NM48-FT-ZEBRANO
Bird’s Eye Maple NM48-FT-BIRMAP
Cathedral Cherry NM48-FT-CATCHE
Red Rust
NM48-FT-REDRUST
Charcoal Wisp
NM48-FT-CHAWIS
Fusionswirl - 4’ x 10’ Sheets x .032” Thick FusionSwirl is created using a proprietary combination of mechanical etching of aluminum and our FusionTech process. As it plays beautifully with light, the multiple colors in the design make each a true work of art.
Omicron & Cirrus
ZETA
NM410-FS-ZETA
Doradus
NM410-FS-DORADUS
GAMMA
NM410-FS-GAMMA
CIRRUS
NM410-FS-CIRRUS
HELIX
NM410-FS-HELIX
P-681
KERFKORE® & ULTRALITE®
FIRST Laminate Flat ~ Then Shape
Step 1
Step 2
Lay Kerfkore or Ultralite Apply glue to black latex on a flat surface. Re- paper side. Adhere premove all dust and debris cut laminate or veneer. for a clean surface.
KERFKORE®
• A flexible product that can be formed into curves and redii as small as 3-1/2”. • It consists of a core of kerfed particleboard, plywood or MDF with a very flexible latex impregnated face paper. • Allows face material of HPL, veneers, metals and other semi-rigit materials. • Also available in a two-sided product. It is made similar to the single-sided product but has a phenolic impregnated backer sheet on it to allow the user to determine the kerfs. • An excellent substrate to use where repetitive actions are needed. • Grooves run in 8 ft direction. PART #
THICKNESS
KFK-14S
1/4”
KFK-12S
1/2”
KFK-34S
3/4”
KFK-34D
3/4”
P-682
SHEET 4’ x 8’ single side 4’ x 8’ single side 4’ x 8’ single side 4’ x 8’ double side
Step 3
Apply pressure to laminate to adhere.
Step 4
Final Step
Trim edges, if necessary. Finished product - now you can shape for desired application.
ULTRALITE®
• A flexible, lightweight product that can be formed into curves and radii as small as 3-1/2”. • I t is an excellent substrate to use where hanging, transporting or other weight considerations are important. Weights about 2-3 ounces per square foot. • I t consists of a highdensity noncompubtible foam core with a latex impregnated face paper. • Ultralite has a Class A fire rated core. • Groves run in 8 ft. direction.
PART #
THICKNESS
ULT-12
1/2”
ULT-34
3/4”
SHEET 4’ x 8’ single side 4’ x 8’ single side
FLEXBOARD - TIMBERFLEX - ECONOKORE Shape First ~ Then Laminate Flexboard
• Hardboard face is ready for painting or laminating. • Face maybe covered with a wide variety of materials: veneer, laminate, metal, fabric, etc. • Panels are dimensionally sized to have same thickness. • Can bend to a 10” radius. PART # THICKNESS SHEET FXB-34 3/4” 4’ x 8’ FXB-34V 3/4” 8’ x 4’
Timberflex
• Smooth 1/8” poplarface that’s ready to paint, stain or cover with laminate without the need for patching and sanding. • Panels bend uniformly without dips, valleys or hardspots. • Panels are dimensionally sized to have the same thckness throughout to assure excellent seam hiding characteristics. • Can bend to a 5” radius. PART # TF-12V TF-34 TF-34V
THICKNESS SHEET 1/2” 8’ x 4’ 3/4” 4’ x 8’ 3/4” 8’ x 4’
EconoKore
• Economical substitute for bending panels. • No sanding or patching required. • Unique 2-ply product that gives you the ability to form curves with less labor and less cost. • Made of processed MDF core with a high density overlay. • Can bend to a 6” radius. PART # THICKNESS SHEET ECK-14V 1/4” 8’ x 4’ ECK-38 3/8” 4’ x 8’ ECK-38V 3/8” 8’ x 4’
P-683