2012
SLIDES, HINGES & PNEUMATIC LIFTS www.panelplus.co
Drawer Sides pg. 293
pgs. 279-323
pg. 314
Pneumatic Lifts • Lid Stays - pgs. 308-312
Slides • Euro Slides - pg. 289 • Full Extension - Undermount • Soft close (Grass) - pg. 280 • Soft Close, Concealed - pg. 281 • Full Extension - Side Mount • 1” Over Travel (Dynaslide) - pg. 283 • 1” Over Travel Economy (e-line) - pg. 284 • 1” Over Travel Heavy Duty (e-line) - pg. 288 • Push Rebound, (REPON) - pg. 285 • Stainless Steel (Sugatsune) - pg. 287 • Low Profile (Fulterer) - pg. 282 • Fulterer Pantry Pull Out- pgs. - 290-291 • Keyboard Pull Out - See Section D • Waste Container - pgs. 292
Sliding Door Track & Hardware • Aluminum Sliding Passing Track - pgs. 317 • Closet Door - pgs. 322-323 • Furniture Inlay & Bypass Track - pgs. 318-319 • Plastic Bypassing Track - pg. 316 • Top Sliding Track (Wood) - pgs. 320-321
F
Slides, Hinges & Pneumatic Lifts
Hydraulic Door Closer
Hinges • Acrylic Hinge - pgs. 306-307 • Euro Hinges • Concealed Metal - pg. 302 • Double Action Spring Hinge pg. 303 • Face Frame - pg. 295 • Flap Door Hinge - pg. 303 • Glass Door Hinge - pg. 303 • Institutional Hinge - pg. 303 • Plates For Euro Hinge pg. 300 • Screw On & Dowel - pgs. 296-297 • Soft Close Euro Hinge & Attachment - pg. 302 • Specialty Euro Hinge pg. 301 • Tool-Less - pgs. 298-299 • Lateral Opened Door Hinge pg. 313 • Panel Hinge (Plastic) - pg. 307 • Piano Hinge • Metal - pg. 305 • Plastic - pgs. 306-307 • Soft Closing Damping - pg. 315 • Tools - pg. 304
Soft Close Dampening System Works with any drawer slide, allowing drawer to softly dampen & pull shut without slamming pg. 282
F-279
GRASS DYNAPRO 2-D FULL EXTENSION SOFT CLOSE DRAWER SLIDES FACE FRAME OR FRAMELESS APPLICATION JUST A SLIGHT PULL IS ALL YOU NEED
Frameless
PRODUCT FEATURES: • Easily pulls open & closes with the grass soft-close dampening system. • Full extension with synchronized mechanism. • Integrated 2-dimesional adjustment for alignmentheight + 3.5 mm & side + 1.5 mm • Each pair of slides is handed- 1 left & 1 right. • For use with up to 5/8” drawer material. • 100 lb. load capacity. • Each set includes slides, left & right front fixing brackets, and two rear mount brackets (rear mount brackets required for face frame applications only).
Bonus F Height eature: & Adjustm Side ent
Calculation Outside Drawer Width
Drawer side thickness 16 (5/8”) 15 (9/16”) 14 (9/16”) 13 (1/2”) Deduct from inside cabinet width 10 (3/8”) 12 (1/2”) 14 (9/16”) 16 (5/8”)
Face Frame
DRAWER CABINET Interior Cabinet Depth DEPTH PART # LENGTH MINIMUM MAXIMUM OI-DP2D-9 9” 12” 11-15/32” 11-3/4” OI-DP2D-12 12” 15” 12-7/8” 14-9/16” OI-DP2D-15 15” 18” 15-7/8” 17-9/16” OI-DP2D-18 18” 20” 18-27/32” 20-9/16” OI-DP2D-21 21” 24” 21-27/32” 23-17/32”
GRASS EXPRESS CONCEALED UNDERMOUNT ROLLER SLIDES FOR FACE FRAME APPLICATIONS
PRODUCT FEATURES:
• Regular extension, concealed slide with smooth glide Delrin rollers. • Double captive, self-aligning slide system. • 1-1/4” self-closing feature. • 100 lb. static load capacity, 75 lb. dynamic load capacity. • Made in the USA & meets ANSI/BHMA A-156.9-2001 industry standard. • For use with up to 5/8” drawer material. • Rear sockets feature side-to-side plus height and depth adjustment. • Each set includes slides and rear mount sockets. • Almond color.
F-280
PART # OI-5323-09 OI-5323-12 OI-5323-15 OI-5323-18 OI-5323-21
DRAWER CABINET LENGTH DEPTH 9” 12” 12” 15” 15” 18” 18” 20” 21” 24”
Interior Cabinet Depth MINIMUM MAXIMUM 10-15/16” 11-1/2” 13-27/32” 14-7/16” 16-29/32” 17-1/2” 20” 20-9/16” 22-15/16” 23-1/2”
MOUNTING SCREWS SOLD SEPARATELY
16 pieces required per pair
SCR-6625FHZ
See page 267 for our complete screw line
75 LB. FULL EXTENSION SOFT CLOSE CONCEALED UNDERMOUNT SLIDE OI-4100 SERIES
Product Features
• Galvanized Steel. • Has great smooth running qualities. • Can be used with Frameless or Face Frame cabinets. • Easy close device prevents slamming. • Each set includes slides, front mounting clips and rear mounting brackets.
FOR USE WITH UP TO 5/8” DRAWER MATERIAL
SIZE
SLIDE
TRAVEL
INSIDE CABINET DEPTH MINIMUM
MAXIMUM
A
MOUNTING MEASUREMENTS B
C
D
mm • inches mm • inches mm • inches mm • inches mm • inches mm • inches mm • inches mm • inches 305 • 12” 292 • 11.50” 325 • 12.80” 366 • 14.41” – – – 32 • 1.26” 381 • 15” 368 • 14.49” 401 • 15.79” 442 • 17.40” 320 • 12.60” – – 32 • 1.26” 457 • 18” 444 • 17.48” 477 • 18.78” 518 • 20.39” 320 • 12.60” 416 • 16.39” – 32 • 1.26” 553 • 21” 520 • 20.47” 553 • 21.77” 594 • 23.39” 320 • 12.60” 416 • 16.39” 480 • 18.90” 32 • 1.26” PACKING UNIT: 10 PAIR PER BOX (INCLUDING REAR MOUNTING BRACKETS AND DRAWER LOCKING DEVICE)
LOAD CARTON PART # LENGTH RATING SIZE OI-4100-12 12” 85 lbs. 10 Pairs OI-4100-15 15” 80 lbs. 10 Pairs OI-4100-18 18” 80 lbs. 10 Pairs OI-4100-21 21” 75 lbs. 10 Pairs
MOUNTING SCREWS SOLD SEPARATELY
16 pieces required per pair
SCR-6625FHZ
See page 267 for our complete screw line
F-281
100 LB. LOW PROFILE FULL EXTENSION DRAWER SLIDE OI-5043 SERIES
Product Features
• Available lengths: 10”-28”. • Clear Zinc Finish. • Side mounted with trigger release. • Low profile for shallow drawers and traditional desks.
• Low profile, only 43 mm (1.69” height). • 100 lbs. Load Rating • Full extension travel. • 1/2” Side spacing. • Trigger release design. • Face Frame hole. • 32 mm Screw Mounting system. • Cold rolled steel with steel ball bearings.
mounting specifications Note: Measurements in Metric
SLIDE
LENGTHS mm • inches 250 • 9.84” 300 • 11.81” 350 • 13.78” 400 • 15.75” 450 • 17.72” 500 • 19.69” 550 • 21.65” 600 • 23.62”
TRAVEL mm • inches 250 • 9.84” 300 • 11.81” 350 • 13.78” 400 • 15.75” 450 • 17.72” 500 • 19.69” 550 • 21.65” 600 • 23.62”
A mm • inches – – – 320 • 12.60” 352 • 13.86” 416 • 16.38” 448 • 17.64” 480 • 18.90”
PART # OI-5043-10 OI-5043-12 OI-5043-14 OI-5043-16 OI-5043-18 OI-5043-20 OI-5043-22 OI-5043-24
B mm • inches – 244 • 9.61” 296 • 11.65” 282 • 11.10” 282 • 11.10” 282 • 11.10” 352 • 13.86” 352 • 13.86”
LENGTH 10” 12” 14” 16” 18” 20” 22” 24”
CABINET PROFILE C mm • inches 195 • 7.68” 224 • 8.82” 282 • 11.10” – – – 282 • 11.10” 282 • 11.10”
D E mm • inches mm • inches 160 • 6.30” 192 • 7.56” 224 • 8.82” 224 • 8.82” 224 • 8.82” 224 • 8.82” 224 • 8.82” 224 • 8.82”
– 128 • 5.04” 128 • 5.04” 128 • 5.04” 128 • 5.04” 128 • 5.04” 128 • 5.04” –
LOAD RATING 120 lbs. 120 lbs. 115 lbs. 110 lbs. 105 lbs. 100 lbs. 95 lbs. 90 lbs.
F mm • inches – – – 25 • .98” 43 • 1.69” 29 • 1.14” 47 • 1.85” 64 • 2.52”
G mm • inches 160 • 6.30” 192 • 7.56” 256 • 10.08” 288 • 11.34” 352 • 13.86” 416 • 16.38” 448 • 17.64” 512 • 20.16”
DRAWER PROFILE – – – – 271 • 10.67” 297 • 11.69” 323 • 12.72” –
– – 96 • 3.78” 128 • 5.04” 160 • 6.30” 192 • 7.56” 224 • 8.82” 224 • 8.82”
– 32 • 1.26” – 32 • 1.26” – – – –
MOUNTING SCREWS SOLD SEPARATELY
16 pieces required per pair
SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
SCR-6625FHZ
See page 267 for our complete screw line
EASY CLOSE SOFT CLOSE DAMPENING SYSTEM Features
Works with any drawer slide.
• Made of grey high impact polystyrene. • 3 models available to accommodate side clearance .39” (10 mm) -.53” (13.5 mm). • Drawer is softly dampened & pulled shut without slamming. • All mounting hardware & installation instructions included.
F-282
7
OI-8002
96
4
145
DRAWER WEIGHT
129
Follower
OI-8001, OI-8003
192
27 52
SIDE CLEARANCE PACKING .39” (10 mm) OI-8002 Up to 40 lbs.* Per Piece .53” (13.5 mm) OI-8001 Up to 75 lbs. .49” (12.5 mm) Per Pair OI-8003 Up to 150 lbs. .49” (12.5 mm) Per Pair *NON-HANDED-USE 2 PIECES FOR DRAWERS UP TO 80 LBS. PART #
4.5
2
Product
32
31
100 LB. FULL EXTENSION SLIDE 4634 • 1” over travel. • Available Lengths: 10”- 28”. • Clear Zinc finish. • Side Mounted with Butterfly release. • 1/2” side clearance.
Butterfly Release
Product Features
• Easy to pull out Butterfly release for disconnect. • Ball retainer detent for easy drawer re-install. • Hold-In-Detent. • 1/2” Side spacing. • Load rating: 100 lbs/Pair (22” length). • Screw mounting system 32mm compatible. • Comparable with Accuride® 3834 and Knape & Vogt® 8405. • Quietest slide on the market.
mounting specifications profile:
1.816”
.508”
SLIDE
LENGTHS
TRAVEL
mm • inches mm • inches 250 • 9-21/32” 254 • 10” 300 • 11-13/16” 305 • 12” 350 • 13-25/32” 356 • 14” 400 • 15-3/4” 406 • 16” 450 • 17-23/32” 457 • 18” 500 • 19-11/16” 508 • 20” 550 • 21-21/32” 559 • 22” 600 • 23-5/8” 610 • 24” 650 • 25-19/32” 660 • 26” 700 • 27-9/16” 711 • 28”
Note: Measurements in Metric
A1
mm • inches – – 128 • 5-1/32” 128 • 5-1/32” 128 • 5-1/32” 128 • 5-1/32” 128 • 5-1/32” 128 • 5-1/32” 128 • 5-1/32” 128 • 5-1/32”
A
mm • inches – – – – – 192 • 7-9/16” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8”
B
mm • inches – – – 320 • 12-19/32” 320 • 12-19/32” 352 • 13-55/64” – – – 288 • 11-11/32”
MOUNTING MEASUREMENTS C
D
mm • inches mm • inches – – – – – – – – – – – – 416 • 16-3/8” – 416 • 16-3/8” – 416 • 16-3/8” 544 • 21-13/32” 448 • 17-3/8” 544 • 21-13/32”
E
mm • inches 192 • 7-9/16” 242 • 9-17/32” 292 • 11-1/2” 342 • 13-15/32” 392 • 15-7/16” 442 • 17-13/32” 492 • 19-3/8” 542 • 21-11/32” 592 • 23-19/64” 642 • 25-9/32”
F
mm • inches – 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8” 224 • 8-7/8”
G
mm • inches – – – 320 • 12-19/32” 352 • 13-55/64” 416 • 16-5/32” 352 • 13-55/64” 352 • 13-55/64” 352 • 13-55/64” 352 • 13-55/64”
H
mm • inches – – – – – – 448 • 17-41/64 480 • 18-57/64” 544 • 21-27/64” 544 • 21-27/64”
100 LB FULL EXTENSION SLIDE WITH OVER TRAVEL
LOAD PART # LENGTH RATING OI-4634-1010” 120 lbs. OI-4634-1212” 115 lbs. OI-4634-1414” 110 lbs. OI-4634-1616” 105 lbs. OI-4634-1818” 100 lbs. OI-4634-2020” 100 lbs. OI-4634-2222” 100 lbs. OI-4634-2424” 85 lbs. OI-4634-2626” 80 lbs. OI-4634-2828” 75 lbs.
ZINC FINISH (ZN)
RECOMMENDED DRAWER WIDTH
10” 12” 14” 16” 18” 20” 22” 24’ 26” 28”
CARTON SIZE 20 20 20 20 10 10 10 10 10 10
MOUNTING SCREWS SOLD SEPARATELY (16 pieces required per pair)
SCR-6625FHZ
See page 267 for our complete screw line SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
F-283
ECONOMY 100 LB. FULL EXTENSION SLIDE WITH 1” OVER TRAVEL
Product Features
• Standard with 1” over travel. • Available Lengths: 10” - 28”. • Clear Zinc Finish. • Side mounted with release latch for easy disconnect. • Hold in detent. • 1/2” side spacing. • Load rating: 100 lbs/pair (22” length). • Screw mounting system 32mm compatible. • 1/2” side clearance. • Comparable with Dynaslide® 4634, Accuride® 3834, & Knape & Vogt® 8405.
mounting specifications profile:
1.816”
Note: Measurements in Metric .508”
SLIDE
LENGTHS
mm • inches 250 • 10” 300 • 12” 350 • 14” 400 • 16” 450 • 18” 500 • 20” 550 • 22” 600 • 24” 650 • 26” 700 • 28”
A
mm • inches – 128 • 5.12” – 128 • 5.12” 128 • 5.12” 128 • 5.12” 128 • 5.12” 128 • 5.12” 128 • 5.12” 128 • 5.12”
B
C
mm • inches mm • inches – – – – – – – – – – – – – – 224 • 8.96” – 224 • 8.96” – 224 • 8.96” 288 • 11.52”
PART #
OI-9400-10 OI-9400-12 OI-9400-14 OI-9400-16 OI-9400-18 OI-9400-20 OI-9400-22 OI-9400-24 OI-9400-26 OI-9400-28
LENGTH
10” 12” 14” 16” 18” 20” 22” 24” 26” 28”
D
MOUNTING MEASUREMENTS
mm • inches – – – – 320 • 12.8” 320 • 12.8” – 416 • 16.64” 416 • 16.64” 416 • 16.64”
LOAD RATING
120 lbs. 115 lbs. 110 lbs. 105 lbs. 100 lbs. 100 lbs. 100 lbs. 85 lbs. 80 lbs. 75 lbs.
E
mm • inches – – – – – – 416 • 16.64” – 544 • 21.75” 544 • 21.75”
RECOMMENDED DRAWER WIDTH
10” 12” 14” 16” 18” 20” 22” 24” 26” 28”
F
mm • inches 192 • 7.68” 242 • 9.68” – 342 • 13.68” 392 • 15.68” 442 • 17.68” 492 • 19.68” 542 • 21.68” 592 • 23.68” 642 • 25.68”
G
CARTON SIZE
15 Pairs 15 Pairs 15 Pairs 15 Pairs 15 Pairs 15 Pairs 15 Pairs 10 Pairs 10 Pairs 10 Pairs
SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
F-284
H
mm • inches mm • inches 279.4 • 11.176” 250 • 10” 330.2 • 13.208” 300 • 12” – 350 • 14” 431.8 • 17.272” 400 • 16” 482.6 • 19.304” 450 • 18” 534.2 • 21.368” 500 • 20” 584.2 • 23.368” 550 • 22” 635 • 25.4” 600 • 24” 685.8 • 27.432” 650 • 26” 736.6 • 29.464” 700 • 28”
I
J
K
mm • inches mm • inches mm • inches – – – 224 • 8.96” – – – – – 224 • 8.96” 320 • 12.8” – 224 • 8.96” 352 • 14.08” – 224 • 8.96” 416.1 • 16.644” – 224 • 8.96” 352 • 14.08” – 224 • 8.96” 352 • 14.08” 480 • 19.2” 224 • 8.96” 352 • 14.08” 544.1 • 21.764” 224 • 8.96” 352 • 14.08” 544.1 • 21.764”
MOUNTING SCREWS SOLD SEPARATELY
16 pieces required per pair SCR-6625FHZ
See page 267 for our complete screw line
100 LB. FULL EXTENSION BALL BEARING SLIDE with PUSH REBOUND bonus features:
Product Features
• Lengths: 12” to 28”. • Clear Zinc Finish. • Black Finish available while supplies last. • 1/2” side clearance.
- only 4mm or (.16”) push in on drawer front required to activate. - 3mm (.12”) reveal or gap on the drawer front.
• Push-Rebound function built in slide, easy for installation. • Rebound 2” - 5” when push drawer. • Non-handed disconnect release. • Electro-Zinc plated with clear chromate. • Only 4 mm (.16”) required to fully push in for open or close. • Load rating 100 lbs per pair at 22” length (75 lbs for epoxy finish).
mounting specifications
profile: .5”
1.8”
Note: Measurements in Metric SIZE
SLIDE
TRAVEL
mm • inches mm • inches
300 • 12” 350 • 14” 400 • 16” 450 • 18” 500 • 20” 550 • 22” 600 • 24” 650 • 26” 700 • 28”
305 • 12” 356 • 14” 406 • 16” 457 • 18” 508 • 20” 559 • 22” 610 • 24” 660 • 26” 711 • 28”
MOUNTING MEASUREMENTS
A
mm • inches
B
96 • 3-3/4” 96 • 3-3/4” 128 • 5” 160 • 6-1/4” 192 • 7-9/16” 224 • 8-13/16” 224 • 8-13/16” 256 • 10-1/16” 256 • 10-1/16”
MAXIMUM LOAD RECOMMENDED PART # LENGTH RATING DRAWER WIDTH OI-4060-12 12” 50 lbs. 19” OI-4060-14 14” 60 lbs. 21” OI-4060-16 16” 60 lbs. 23” OI-4060-18 18” 100 lbs. 25” OI-4060-20 20” 100 lbs. 27” OI-4060-22 22” 100 lbs. 29” OI-4060-24 24” 100 lbs. 31” OI-4060-26 26” 80 lbs. 33” OI-4060-28 28” 70 lbs. 35”
mm • inches
– 128 • 5” 144 • 5-11/16” 160 • 6-1/16” 160 • 6-1/16” 192 • 7-9/16” 224 • 8-13/16” 256 • 10-1/16” 320 • 12-9/16”
C
mm • inches
– 136 • 5-3/8” – 192 • 7-9/16” – 128 • 5” – 128 • 5” – 192 • 7-9/16” 224 • 8-13/16” – 256 • 10-1/16” – 288 • 11-5/16” – 320 • 12-9/16” –
ZINC FINISH (ZN) CARTON SIZE 20 Pairs 20 Pairs 20 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs
D
mm • inches
E
mm • inches
– – 240 • 9-1/2” 288 • 11-3/8” 336 • 13-1/4” 384 • 15-1/8” 432 • 17” 486 • 19-1/8” 544 • 21-1/8”
* BLACK FINISH (BK) CARTON SIZE 20 Pairs 20 Pairs 20 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs
* 17/32” Side Clearance
LOAD
kg • lbs.
22 • 50 27 • 60 27 • 60 45 • 100 45 • 100 45 • 100 45 • 100 36 • 80 31 • 70
MOUNTING SCREWS SOLD SEPARATELY
16 pieces required per pair SCR-6625FHZ
See page 247 for our complete screw line.
F-285
100 LB. FULL EXTENSION BALL BEARING SLIDE with EASY close (SOFT CLOSE) mechanism
Product Features
• Lengths: 12” to 28”. • Clear Zinc Finish. • Precision ball bearing slide for medium-duty applications in office and residential furniture. • Drawer profile features an easy to operate disconnect finger release trigger. • System 32 compatible hole locations. • Drawer slide is non-handed. • New ECD™ easy close (soft close) device. • 1/2” side clearance.
TESTED & CERTIFIED
to ANSI/BIFMA specifications cycles at 50,000
mounting specifications
Note: Measurements in Metric
SLIDE SIZE
TRAVEL
MOUNTING MEASUREMENTS A
B
mm • inches mm • inches mm • inches mm • inches **300 • 11.81” 260 • 10.24” – – 350 • 13.78” 350 • 13.78” – – 400 • 15.75” 400 • 15.75” – – 450 • 17.72” 450 • 17.72” – – 500 • 19.69” 500 • 19.69” – 352 • 13.86” 550 • 21.65” 550 • 21.65” 416 • 16.38” 352 • 13.86” 600 • 23.62” 600 • 23.62” 416 • 16.38” 352 • 13.86” 650 • 25.59” 650 • 25.59” 512 • 20.16” 352 • 13.86” 700 • 27.56” 700 • 27.56” 512 • 20.16” 352 • 13.86” ** 25kg. (55 lbs) max. load capacity for 300mm slide.
LOAD PART # LENGTH RATING OI-5000-12 12” 100 lbs. OI-5000-14 14” 100 lbs. OI-5000-16 16” 100 lbs. OI-5000-18 18” 100 lbs. OI-5000-20 20” 95 lbs. OI-5000-22 22” 90 lbs. OI-5000-24 24” 85 lbs. OI-5000-26 26” 50 lbs. OI-5000-28 28” 75 lbs.
F-286
CARTON SIZE 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs 10 Pairs
C
mm • inches 166 • 6.64” 160 • 6.30” 224 • 8.82” 256 • 10.08” 224 • 8.82” 224 • 8.82” 224 • 8.82” 224 • 8.82” 224 • 8.82”
D
mm • inches 144 • 5.67” 144 • 5.67” 160 • 6.30” 192 • 7.56” 192 • 7.56” 224 • 8.82” 256 • 10.08” 256 • 10.08” 288 • 11.34”
E
mm • inches 96 • 3.78” 128 • 5.04” 160 • 6.30” 160 • 6.30” 192 • 7.52” 224 • 8.82” 256 • 10.08” 288 • 11.34” 288 • 11.34”
MOUNTING SCREWS SOLD SEPARATELY 16 pieces required per pair SCR-6625FHZ See page 267 for our complete screw line
SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
STAINLESS STEEL FULL EXTENSION DRAWER SLIDES OI-3800S SERIES 75 lb. Capacity
PRODUCT FEATURES: • 304 grade stainless steel. • 3 member full extension. • Ball bearing construction. • Front disconnect. • Positive stop. • Side mounting. • Non handed. • Screws sold separately. SCREW PART # SCR-8625PHZ #8 x 5/8” Pan Head Zinc PART #
OI-3800S-8 OI-3800S-10 OI-3800S-12 OI-3800S-14 OI-3800S-16 OI-3800S-18 OI-3800S-20 OI-3800S-22 OI-3800S-24
SLIDE LENGTH
7.87” 9.84” 11.81” 13.78” 15.75” 17.72” 19.69” 21.65” 23.62”
TRAVEL LENGTH
7.54” 9.57” 12” 14” 16” 18” 20” 22” 24”
LOAD RATING PER PAIR
98 lbs. 92 lbs. 88 lbs. 84 lbs. 79 lbs. 75 lbs. 73 lbs. 68 lbs. 64 lbs.
PROFILE
OI-4500S SERIES 100 lb. Capacity
PRODUCT FEATURES: • 304 grade stainless steel. • 3 member full extension. • Ball bearing construction. • Front disconnect. • Positive stop. • Side mounting. • Non handed. • Full travel. • Screws sold separately. SCREW PART # SCR-8625PHZ #8 x 5/8” Pan Head Zinc
PART #
OI-4500S-10 OI-4500S-12 OI-4500S-14 OI-4500S-16 OI-4500S-18 OI-4500S-20 OI-4500S-22 OI-4500S-24 OI-4500S-26 OI-4500S-28
SLIDE LENGTH
9.84” 11.81” 13.78” 15.75” 17.72” 19.69” 21.65” 23.62” 25.59” 27.56”
TRAVEL LENGTH
9.57” 12” 14” 16” 18” 20” 22” 24” 26” 28”
LOAD RATING PER PAIR
PROFILE
115 lbs. 111 lbs. 108 lbs. 104 lbs. 100 lbs. 97 lbs. 95 lbs. 92 lbs. 90 lbs. 87 lbs.
F-287
HEAVY DUTY FULL EXTENSION SLIDES 200 LB. OVERTRAVEL SLIDES - CLEAR ZINC FINISH Product Features
• Heavy Duty with 1” over travel extension, quick release brackets for quick drawer removal & anti rebound bumpers. • 32mm screw mounting system. • Non-handed. • Side mount with mounting brackets included (1 left & 1 right). • Comparable with Accuride® 3640 and Knape & Vogt 8805. • 7/8” side clearance.
mounting specifications profile:
Note: Measurements in Metric
SLIDE
LENGTH
mm • inches 300 (12”) 350 (14”) 400 (16”) 450 (18”) 500 (20”) 550 (22”) 600 (24”) 650 (26”) 700 (28”)
A
mm • inches – – – 190.5 • 7.62” 215.9 • 8.636” 241.3 • 9.652” 266.7 • 10.668” 292.1• 11.684” 317.5 • 12.7”
B
mm • inches 135.4 • 5.416” 186.2 • 7.448” 237.0 • 9.48” 287.8 • 11.512” 338.6 • 13.544” 389.4 • 15.576” 440.2 • 17.608” 491.0 • 19.64” 541.8 • 21.672”
PART #
OI-74006-12 OI-74006-14 OI-74006-16 OI-74006-18 OI-74006-20 OI-74006-22 OI-74006-24 OI-74006-26 OI-74006-28
F-288
C
mm • inches 179.1 • 7.164” 229.9 • 9.196” 280.7 • 11.228” 331.5 • 13.26” 382.3 • 15.292” 433.1 • 17.324” 483.9 • 19.356” 534.7 • 21.388” 585.5 • 23.42”
LENGTH
12” 14” 16” 18” 20” 22” 24” 26” 28”
D
MOUNTING MEASUREMENTS
mm • inches 204.5 • 8.18” 255.3 • 10.212” 306.1 • 12.244” 356.9 • 14.276” 407.7 • 16.308” 458.5 • 18.34” 509.3 • 20.372” 560.1 • 22.404” 610.9 • 24.436”
TRAVEL LENGTH mm • inches 330.2 • 13” 381 • 15” 431.8 • 17” 482.6 • 19” 533.4 • 21” 584.2 • 23” 635 • 25” 685.8 • 27” 736.6 • 29”
E
mm • inches 229.9 • 9.20” 280.7 • 11.23” 331.5 • 13.26” 382.3 • 15.29” 433.1 • 17.32” 483.9 • 19.36” 534.7 • 21.39” 585.5 • 23.42” 636.3 • 25.45”
F
mm • inches 45.2 • 1.81” 45.2 • 1.81” 45.2 • 1.81” 57.9 • 2.32” 57.9 • 2.32” 70.6 • 2.82” 70.6 • 2.82” 83.3 • 3.33” 83.3 • 3.33”
G
mm • inches 190.5 • 7.62” 190.5 • 7.62” 190.5 • 7.62” 266.7 • 10.67” 266.7 • 10.67” 317.5 • 12.70” 317.5 • 12.70” 393.7 • 15.75” 393.7 • 15.75”
LOAD RECOMMENDED CARTON RATING DRAWER WIDTH SIZE
215 lbs. 210 lbs. 205 lbs. 200 lbs. 190 lbs. 180 lbs. 170 lbs. 160 lbs. 150 lbs.
12” 14” 16” 18” 20” 22” 24” 26” 28”
5 5 5 5 5 5 5 5 5
H
mm • inches 240.4 • 9.616” 240.4 • 9.616” 240.4 • 9.616” 316.6 • 12.664” 316.6 • 12.664” 367.4 • 14.696” 367.4 • 14.696” 443.6 • 17.744” 443.6 • 17.744”
I
mm • inches 152.4 • 6.10” 152.4 • 6.10” 152.4 • 6.10” 203.2 • 8.13” 203.2 • 8.13” 254 • 10.16” 254 • 10.16” 330.2 • 13.21” 330.2 • 13.21”
J
mm • inches – – – – – 171 • 6.84” 171.1 • 6.84” 209.1 • 8.36” 209.1 • 8.36”
K
mm • inches 20.2 • 0.81” 20.2 • 0.81” 20.2 • 0.81” 32.9 • 1.32” 32.9 • 1.32” 45.6 • 1.82” 45.6 • 1.82” 58.3 • 2.33” 58.3 • 2.33”
L
mm • inches 32.5 • 1.30” 32.5 • 1.30” 32.5 • 1.30” 32.9 • 1.32” 32.9 • 1.32” 45.6 • 1.82” 45.6 • 1.82” 58.3 • 2.33” 58.3 • 2.33”
MOUNTING SCREWS SOLD SEPARATELY SCR-6625FHZ See page 267 for our complete screw line
PREMIUM EURO SLIDE • Single extension/Self closing. • Available Lengths: 10” to 28”. • White epoxy coated finish. • 1/2” Side Clearance.
SUPER STRONG 100 LB LOAD RATING @ 22”!
Product Features
• Load rating: 100 lbs at 22”. • Double out-stop safety feature. • Locked-in position when extended. • 32 mm screw hole pattern system. • 3/4” Travel. • Blum compatible.
Note: Measurements in Metric PART #
OI-H2030-10 OI-H2030-12 OI-H2030-14 OI-H2030-16 OI-H2030-18 OI-H2030-20 OI-H2030-22 OI-H2030-26 OI-H2030-28
SIZE inches 10” 12” 14” 16” 18” 20” 22” 26” 28”
LOAD RECOMMENDED CARTON LENGTH RATING DRAWER WIDTH SIZE
10” 12” 14” 16” 18” 20” 22” 26” 28”
100 lbs. 100 lbs. 100 lbs. 100 lbs. 100 lbs. 100 lbs. 100 lbs. 80 lbs. 75 lbs.
10” 12” 14” 16” 18” 20” 22” 26” 28”
25 Pairs 25 Pairs 25 Pairs 25 Pairs 25 Pairs 25 Pairs 25 Pairs 25 Pairs 25 Pairs
DRAWER LENGTH
MIN. INTERNAL CAB. DEPTH
LOSS OF EXTENSION
250 • 9-13/16” 300 • 11-13/16” 350 • 13-3/4 400 • 15-3/4” 450 • 17-3/4” 500 • 19-11/16” 550 • 21-5/8” 650 • 25-5/8” 700 • 27-1/2”
253 • 9-15/16” 303 • 11-7/8” 353 • 13-7/8” 403 • 15-7/8” 453 • 17-13/16” 503 • 19-13/16” 553 • 21-3/4” 653 • 25-3/4” 703 • 27-5/8”
85 • 3-3/8” 85 • 3-3/8” 85 • 3-3/8” 85 • 3-3/8” 95 • 3-3/4” 102 • 4” 110 • 4-5/16” 120 • 4-3/4” 135 • 5-3/8”
mm • inches
mm • inches
mm • inches
EURO SLIDES Features include:
• Self-close/Stay-closed action. • Load Capacity: 75 lbs. • 32mm system screw hole pattern. • Durable epoxy coated steel profiles. • Smooth & quiet nylon rollers. • Bottom mounting. • Drawer Extension (Travel): Length of slide minus 1-1/2”. • 1/2” Side Clearance.
PART #
OI-1500-10 OI-1500-12 OI-1500-14 OI-1500-16 OI-1500-18 OI-1500-20 OI-1500-22 OI-1500-24
$uperior Quality At Affordable Price$
RECOMMENDED SIZE DRAWER WIDTH
10” 12” 14” 16” 18” 20” 22” 24”
10” 12” 14” 16” 18” 20” 22” 24”
SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
profile:
MOUNTING SCREWS SOLD SEPARATELY
(16 pieces required per pair)
SCR-6625FHZ
See pages 267 for our complete screw line
F-289
PROGRESSIVE ACTION FULL EXTENSION
PANTRY PULL OUT SLIDE WITH TOP SLIDE PRODUCT FEATURES:
Load Capacity: 250 lbs
• America’s standard - Ideally suited for “Standard” Cabinet Depths! • Superior Construction - Solid Delrin (Encased Steel Ball Bearings) Bearings provides the best solution for heavy-weight fullextension movement! • Smooth Action - Provides quite movement, even under heavy loads! • Maintenance Free - (Note: Do not lubricate any part of the slide). • Durability - LGA tested according to DIN 4554 Standards @ 50,000 cycles. • No Deflection in fully extended position! • The top slide provides Lateral Stability, thus pantry contents will not fall out when slide is engaged. • The EZ Close System is an automatic/self-closing and slam resistant N E W function and will not be compromised by varying load conditions. During Now the last 75mm of the closing motion the pull-out is decelerated and then Included with each softly pulled completely closed. slide • Horizontal & Vertical Adjustment. • Floor Mounted (with Top Slide). • Back Stop Included. • Material/Finish: Steel, Silver Powder Coated. • Top slide uses #6 countersink screws - bottom slide uses 1/4. 20 Machine screws & nuts and #8 screws not included.
Ideally suited for standard cabinet depths 1.58”
.08”
TOP RAIL .52”
1”
1.56”
1.46”
1.56”
BOTTOM RAIL
.08”
.08”
1.48”
LENGTH EXTENSION WEIGHT PART # MM IN. MM IN. BY LBS. OI-771-22 575 22.64” 559 22.01” 19.27
F-290
TOP SLIDE
.08”
2.36”
EASY CLOSE DAMPENING CYLINDER
1.48” .16”
BOTTOM SLIDE
75 LB. FULL EXTENSION SOFT CLOSE CONCEALED UNDERMOUNT SLIDE PRODUCT FEATURES:
• 175 lb. dynamic. • Delrin encased steel ball bearings. • Quick & easy installation through patented system. • Quiet movement. • Integrated horizontal and vertical adjustment. • Recommended for cabinet heights up to 59.6”. • Maintenance free, (Do not lubricate any part of the slide). • Double-sided captive profile. • Material: Steel, white powder coated. • Easy close device integrated to both top & bottom slide.
PART # LENGTH OI-775-16 16” OI-775-18 18” OI-775-20 20” OI-775-22 22” OI-775-24 24” OI-775-26 26” OI-775-28 28” OI-775-30 30”
LENGTH EXT A B C MM IN MM IN MM IN MM IN MM IN 400 (16’) 15.75 385 15.16 133 5.24 261 10.28 357 14.06 450 (18”) 17.72 435 17.13 133 5.24 261 10.28 421 16.58 500 (20”) 19.69 485 19.10 165 6.50 325 12.78 453 17.84 550 (22”) 21.65 535 21.06 197 7.76 357 14.06 517 20.35 600 (24”) 23.62 585 23.03 197 7.76 389 15.32 549 21.61 650 (26”) 25.59 635 25.00 229 9.02 421 16.58 613 24.13 700 (28”) 27.56 685 26.97 261 10.28 485 19.09 645 25.39 750 (30”) 29.53 735 28.94 261 10.28 485 19.09 709 27.91 PACKING UNIT: 1 set per box with mounting instructions
MM 229 261 293 325
D
E
F
G
Load Capacity: 175 lbs
WEIGHT BY LBS. 11 12 13.5 14.5 16 17 18 20
IN MM IN MM IN MM IN MM 293 11.54 133 5.24 165 357 14.06 133 5.24 165 389 15.32 197 7.76 229 453 17.84 197 7.76 229 9.02 485 19.09 197 7.76 229 10.28 549 21.61 197 7.76 229 11.54 581 22.87 197 7.76 229 12.78 645 25.39 197 7.76 229
H
I
J
K
WEIGHT PER SET
IN MM IN MM IN MM IN KG LBS 6.50 261 10.21 293 11.54 306 12.05 4.90 10.78 6.50 261 10.21 293 11.54 306 12.05 5.40 11.88 9.02 357 14.06 389 15.32 402 15.83 6.10 13.42 9.02 357 14.06 389 15.32 402 15.83 6.60 14.52 9.02 357 14.06 389 15.32 402 15.83 7.15 15.73 9.02 357 14.06 389 15.32 402 15.83 7.75 17.05 9.02 357 14.06 389 15.32 402 15.83 8.25 18.15 9.02 357 14.06 389 15.32 402 15.83 895 19.69
F-291
WASTE CONTAINER PULL-OUT SLIDES OI-3600 SERIES
Material: White Powder Coated Cold Rolled Steel
Side Mount
Floor Mount PRODUCT FEATURES:
• Full extension with steel ball bearings. • New easy close automatic self closing & slam resistant. • Versatile, works in most kitchen base cabinets & gives user flexibility in configurations of bins. • 6-way adjustable front bracket Is reversible for any door application. PART # OI-3600-F OI-3600-S
MOUNTING TYPE Floor Side
LENGTH EXTENSION LOAD CAPACITY MM IN MM IN 575 22.64” 575 22.64” 100 lbs. 575 22.64” 575 22.64” 100 lbs.
PULL-OUT WASTE CONTAINERS Available in White
RV CONTAINERS
Shown with RV-DM-KIT
See pages 379-383 for our complete line of Waste Containers RV-18PB-1
F-292
RV-18PB-2-S
5349-18DM-2
WEIGHT PART # DESCRIPTION PER CARTON RV-18PB-1 14-7/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container 13 lbs. RV-18PB2-S 14-3/8”W x 22”D x 19-1/4”H Double 35 Qt. Waste Container w/full extension 14 lbs. 5349-18DM-2 14-7/8”W x 22”D x 19-1/2”H Double 35 Qt. White Waste Container --
SOLID BIRCH DRAWER PARTS
Solid Birch Drawer Construction Components with Clear Catalyzed Finish (Natural Light)
Sides and fronts/backs are 5/8” solid edge glued birch components. Straight and true, our drawer components are finished with a durable UV coating and available in 6 sizes for any drawer application. Side lengths are 22” (558.8mm) and fronts/backs are 67” (1701.8mm). Drawer bottoms are also available in 5mm Birch Plywood (BIBB grade).
P R O D U C T S
R1/16 (R1.6mm) 9/32” (7.0mm) Height 33/64” (13.1mm)
DRAWER SIDES, FRONTS, BACKS
DRAWER SIDES
PART # DS-2-BIR DS-3-BIR DS-4-BIR DS-6-BIR DS-8-BIR DS-10-BIR * DS-10-BIR-NG
HEIGHT LENGTH 2-1/2” 22” 3-1/2” 22” 4” 22” 6” 22” 8” 22” 10” 22” 10” 22”
BOX QTY. 20 pcs. 20 pcs. 20 pcs. 20 pcs. 10 pcs. 10 pcs. 10 pcs.
* Products with an NG part number are supplied with no groove and have a finished radius on both sides for custom heights.
5/8 (15.9mm)
DRAWER FRONTS/BACKS
PART # DF-2-BIR-8 DF-3-BIR-8 DF-4-BIR-8 DF-6-BIR-8 DF-8-BIR-8 DF-10-BIR-8 * DF-10-BIR-NG-8
HEIGHT LENGTH 2-1/2” 96” 3-1/2” 96” 4” 96” 6” 96” 8” 96” 10” 96” 10” 96”
BOX QTY. 5 pcs. 5 pcs. 5 pcs. 5 pcs. 3 pcs. 3 pcs. 3 pcs.
* Products with an NG part number are supplied with no groove and have a square edge on both sides for custom heights.
DRAWER BOTTOM
PART # HEIGHT LENGTH BOX QTY. DB-2160 21-7/8” 60” 3 pcs. DRAWER BOTTOM
Ends can be joined by gluing, nailing or cutting out dovetail joinery.
FURNITURE ASSEMBLY FASTENERS & ACCESSORIES Runner Wheel
• Simple - Cost Effective • Eliminates need for drawer slides • Ideally suited for applications limited in space Specifications For Runner Wheel Colors: Black & Brown Drilled Hole Required: 8mm x 11mm deep
DRAWER FRONT ADJUSTER
Use on drawer fronts to provide realignment facility on fronts attached to 4-sided drawers. Housing is nylon with die cast threaded insert screw, plated steel. Housing is hammer driven into a 25MM prebored hole. Screw attaches 4th side of drawer to allow adjustment of front until fully tightened. Screw size is 7/8” x 8/32”. FEATURES: 2mm of adjustment in vertical or horizontal directions. 25mm hole boring in drawer front. Large head screw attachment to 4th side of drawer. Simple to use.
PART # COLOR OP-0900 Black 0900 Brown
Requires 8mm x 11mm drilled hole
PART # 6310-BR
COLOR Brown
F-293
DRAWER SLIDE SPACERS PRODUCT FEATURES:
MILLER FASTBLOCK™
• Replaces commonly used block of wood for mounting drawer glides. • Can be used flush with face frame edge and mounted to back of drawer glide. • Can be used 2 per side in frameless cabinets to adjust drawer glides.
PART # DESCRIPTION FC-MFB-WH Miller Fast Block 2 pc. pack FC-MFB-WH-100 Miller Fast Block 100 pc. pack
REAR MOUNT SOCKETS REAR MOUNT SOCKET OI-RMB
FIXED FULL EXTENSION REAR SOCKET OI-627
WORKS WITH DRAWER SLIDE SETS: OI-1500, OI-H2030
ADJUSTABLE UNDER MOUNT REAR SOCKET OI-680 WORKS WITH DRAWER SLIDE SETS: OI-2030
WORKS WITH DRAWER SLIDE SETS: OI-4634, OI-9400, OI-4500S, OI-4070
METAL REAR MOUNTING BRACKETS OI-RMB-S OI-5000B-S WORKS WITH DRAWER SLIDE SETS: OI-5000
FIXED REAR SOCKETS OI-6402
LEFT SOCKET
RIGHT SOCKET
WORKS WITH DRAWER SLIDE SETS: OI-1500, OI-H2030
WORKS WITH DRAWER SLIDE SETS: OI-4634, OI-9400
SPACERS FULL EXTENSION DRAWER SLIDE SPACER OI-3616 WORKS WITH DRAWER SLIDE SETS: OI-4634, OI-9400, OI-4500S, OI-4070
UNDER MOUNT DRAWER SLIDE SPACER OI-3640 WORKS WITH DRAWER SLIDE SETS: OI-2030
STANDARD DRAWER SLIDE SPACER OI-3602 WORKS WITH DRAWER SLIDE SETS: OI-1500, OI-H2030
POLYURETHANE ADHESIVE BUMPERS All bumpers stocked in clear. Please inquire for colors. Colors sold in full cases only.
1000 PIECE MINIMUM ORDER
PAB-001
PAB-012 PAB-112
F-294
PAB-002 PAB-006 PAB-106 PAB-018 PAB-023
PAB-003
PAB-008 PAB-044
PAB-078
N EW
PAB-009
!
PART # WIDTH HEIGHT CASE QUANTITY PAB-001CL .500” .140” 5000 PAB-002CL .312” .085” 5400 PAB-003CL .440” .200” 5082 PAB-006CL .375” .150” 7200 PAB-008CL .500” .120” 5000 PAB-009CL .880” .400” 1440 PAB-012CL .500” .140” 5000 PAB-018CL .500” .230” 5000 PAB-023CL .810” .300” 2646 PAB-044CL .750” .160” 2450 PAB-078CL .400” .0130” 7200 SOFT SERIES -Softer bumper for extra sound deadening properties PAB-106CL .375” .150” 7200 PAB-112CL .500” .140” 5000
HINGES
TEC 864 ONE PIECE HINGE
108º OPENING ANGLE - 1/4” TO 1” OVERLAY FOR FACE FRAME APPLICATIONS PRODUCT FEATURES:
• Face frame hinges with 3-dimensional adjustment. • 42mm drilling pattern. • 1 piece hinge and base plate combination. • For door thickness up to 3/4”. • Front locating tabs position hinge on face frame. • Available with either wrap around or side mount base plate.
42mm DRILLING PATTERN
DRILLING DEPTH 7/16” (10.5mm)
SIDE MOUNT PART#
VS8-108-25S VS8-108-50S VS8-108-75S VS8-108-100S VS8-108-125S VS8-108-138S VS8-108-150S VS-108-25S VS-108-50S VS-108-75S VS-108-100S VS-108-125S VS-108-138S VS-108-150S
WRAP AROUND PART#
OVERLAY PLATE TYPE
1/4” 1/2” 3/4” 1” 1-1/4” 1-3/8” 1-1/2” 1/4” 1/2” 3/4” 1” 1-1/4” 1-3/8” 1-1/2”
VS8-108-25W VS8-108-50W VS8-108-75W VS8-108-100W VS8-108-125W VS8-108-138W VS8-108-150W VS-108-25W VS-108-50W VS-108-75W VS-108-125W VS-108-138W VS-108-150W
DOWELLED
SCREW-ON
OVERLAY PLATE TYPE
1/4” 1/2” 3/4” 1” 1-1/4” 1-3/8” 1-1/2” 1/4” 1/2” 3/4” 1-1/4” 1-3/8” 1-1/2”
DOWELLED
SCREW-ON
UNI-SOFT SOFT CLOSE ADAPTOR PRODUCT FEATURES:
• Works for face frame cabinets on all overlays and frameless cabinets on full overlay doors. • Brushed nickel finish blends well with hinge finish. • Manually adjustable to desired closing speed. • Mounts easy in corners with #6 x 3/4” wood screws included. • 11/16” (17mm) Clearance required. • Ideal when upgrading existing cabinets or working with other hinges options. PART#
DESCRIPTION
UNI-SFT Individual Polybag UNI-SFT-25 25 piece bag
F-295
HINGES NEXIS CLICK-ON QUICK MOUNTING HINGES Door Size Guidelines
PRODUCT FEATURES: • • • •
All Metal, Nickel Plated, self closing hinges. Full overlay, half overlay, and in-set options. Screw-on or doweled (knock-in) options available. All hinges work with soft close system - see individual charts below. • Plate options available for Face Frame or Frameless applications.
Hinges
100° OPENING
SPECIFICATIONS:
BORING PATTERN
OVERALL CUP
DOWELED
SCREW-ON
Mimimum cup depth 11mm or .44”
• Works with up to 7/8” (22mm) thick door.
SCREW-ON
SIDE VIEW
DOWELED (Knock-In) FULL OVERLAY
FULL OVERLAY
HALF OVERLAY
INSET
PART#
CS4-100S-F CS4-100S-H CS4-100S-I
DESCRIPTION
Full Overlay (00) Half Overlay (08) Inset (15)
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
HALF OVERLAY
PCS. PER CARTON
PART#
CS4-100D-F CS4-100D-H CS4-100D-I
250 250 250
SOFT CLOSE
INSET
See Option A, pg. 301
DESCRIPTION
Full Overlay (00) Half Overlay (08) Inset (15)
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
PCS. PER CARTON
250 250 250
See Option A, pg. 301
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
CS-SCREW
6 x 5/8” Zinc Plated Screw 500 pcs. per carton
F-296
SOFT CLOSE
HINGES NEXIS CLICK-ON QUICK MOUNTING HINGES 110° OPENING
COMPARABLE TO BLUM SPECIFICATIONS:
BORING PATTERN
OVERALL CUP
DOWELED
SCREW-ON
SIDE VIEW
Mimimum cup depth 11mm or .44”
• Works with up to 25/32” (20mm) thick door.
SCREW-ON
DOWELED (Knock-In) FULL OVERLAY
FULL OVERLAY INSET
HALF OVERLAY
PART#
DESCRIPTION
CS22-110S-F Full Overlay (00) CS22-110S-H Half Overlay (08) CS04-110S-I Inset (15) PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
INSET
HALF OVERLAY
PCS. PER CARTON
PART#
DESCRIPTION
CS22-110D-F Full Overlay (00) CS22-110D-H Half Overlay (08) CS04-110D-I Inset (15)
250 250 250
SOFT CLOSE
See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
125° OPENING
SPECIFICATIONS:
OVERALL CUP
DOWELED
SOFT CLOSE
See Option A, pg. 301
SIDE VIEW
Mimimum cup depth 11.8mm or .47”
• Works with up to 3/4” (19mm) thick door.
SCREW-ON
250 250 250
COMPARABLE TO BLUM
BORING PATTERN
SCREW-ON
PCS. PER CARTON
DOWELED (Knock-In)
FULL OVERLAY
PART#
FULL OVERLAY
HALF OVERLAY
DESCRIPTION
CS29-125S-F Full Overlay (00) CS29-125S-H Half Overlay (08) PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
PCS. PER CARTON
PART#
DESCRIPTION
CS29-125D-F Full Overlay (00) CS29-125D-H Half Overlay (08)
250 250
SOFT CLOSE
HALF OVERLAY
See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
PCS. PER CARTON
250 250
SOFT CLOSE
See Option A, pg. 301
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
CS-SCREW
6 x 5/8” Zinc Plated Screw 500 pcs. per carton
F-297
HINGES
NEXIS CLICK-ON QUICK MOUNTING HINGES 170° OPENING
COMPARABLE TO BLUM
SPECIFICATIONS:
BORING PATTERN
100% FINGER PROTECTION
OVERALL CUP
DOWELED
SCREW-ON
Mimimum cup depth 11mm or .44”
• Does not work with CS-SOFT
• Works with up to 1” (26mm) thick door.
SCREW-ON
SIDE VIEW
DOWELED (Knock-In)
FULL OVERLAY
HALF OVERLAY
PART#
DESCRIPTION
CS65-170S-F Full Overlay (00) CS65-170S-H Half Overlay (08) PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
HALF OVERLAY
FULL OVERLAY
PCS. PER CARTON
PART#
DESCRIPTION
CS65-170D-F Full Overlay (00) CS65-170D-H Half Overlay (08)
250 250
SOFT CLOSE
See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
PCS. PER CARTON
250 250
SOFT CLOSE
See Option A, pg. 301
NEXIS IMPRESSO
WITH “TOOL-LESS” QUICK MOUNTING TECHNOLOGY EASY TO INSTALL!
2.
1.
4.
3.
5.
1. Insert Twin NT hinges into the door boring. PRODUCT FEATURES: 2. Close the flap of the • Twin NT hinges are perfect for door materials such as Particle Board, Solid Wood and MDF. hinge cup, and you are • Twin NT securely fits and does not allow twisting of the hinge due to a 3-point connection of the hinge cup. • All Metal Nickel Plated, self closing hinges. done! • Full Overlay and Half Overlay options. • All hinges work with Soft Close-see individual charts below. • Plate Options available for Face Frame and Frameless Options.
SPECIFICATIONS:
110° OPENING
BORING PATTERN
OVERALL CUP
DOWELED
SCREW-ON
Maximum Cup Depth is 11.5mm or .46”
• Works with up to 25/32” (20mm) thick door. FITS BOTH HOLE PATTERNS
FULL OVERLAY
HALF OVERLAY
PART#
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
ALL MEASUREMENTS ARE IN MILLIMETERS.
6 x 5/8” Zinc Plated Screw 500 pcs. per carton
F-298
DESCRIPTION
CST22-110-F Full Overlay (00) CST22-110-H Half Overlay (08)
CS-SCREW
SIDE VIEW
PCS. PER CARTON
125 125
SOFT CLOSE
See Option B, pg. 301
HINGES NEXIS IMPRESSO
WITH “TOOL-LESS” QUICK MOUNTING TECHNOLOGY SPECIFICATIONS:
125° OPENING
BORING PATTERN
OVERALL CUP
DOWELED
SCREW-ON
SIDE VIEW
Minimum Cup Depth is 12mm or .48”
• Works with up to 3/4” (19mm) thick door. FITS BOTH HOLE PATTERNS
PART#
DESCRIPTION
CST29-125-F Full Overlay (00) CST29-125-H Half Overlay (08) FULL OVERLAY
PCS. PER CARTON
125 125
HALF OVERLAY PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
SOFT CLOSE
See Option B, pg. 301
170° OPENING BORING PATTERN
100% FINGER PROTECTION
OVERALL CUP
DOWELED
SCREW-ON
SIDE VIEW
Minimum Cup Depth is 11mm or .44”
• Works with up to 1” (26mm) thick door. FITS BOTH HOLE PATTERNS
FULL OVERLAY
HALF OVERLAY
PART#
DESCRIPTION
CST65-170-F Full Overlay (00) CST65-170-H Half Overlay (08) PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
A, B, C
D, E
PCS. PER CARTON
50 |50
SOFT CLOSE
See Option B, pg. 301
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
CS-SCREW
6 x 5/8” Zinc Plated Screw 500 pcs. per carton
F-299
HINGES
NEXIS MOUNTING PLATES PLEASE REFER TO CHART BELOW WHEN PURCHASING PLATES FOR HINGES DIFFERENT COMBINATIONS WILL YIELD DIFFERENT RESULTS FRAMELESS PLATES FACE FRAME PLATES
HINGES “00” “02” “08” “18” “00” “04” “02”
FULL - 00 Full - 3/4” Full - 5/8” Half Inset 5/8” - 3/4” 1/2” N/A
HALF - 08 Half - 3/4” Half - 5/8” Inset N/A 3/8” 1/4” Inset
INSET - 15 Inset Inset N/A N/A N/A N/A N/A
Boring distance will affect overlay result; always prepare a mock up before boring doors.
FOR FACE FRAME APPLICATIONS
• Nickel Plated. • 6 way adjustment: up and down, in and out, and side to side. • Height and depth adjustable.
• All adjustments can be made independently. • Mounts with wood screws (not included).
A. SPECIAL PLATE FOR FACE FRAME
PART#
HINGE TYPE
PART#
HINGE TYPE
CSP-FF88-00 Click-on Twin CSP-FF88-04 Click-on Twin
DOOR OVERLAY
PLATE PCS. PER TYPE CARTON
DOOR OVERLAY
PLATE PCS. PER TYPE CARTON
DOOR OVERLAY
PLATE PCS. PER TYPE CARTON
1/8” to 3/4” 1/8” to 3/4”
“00” “04”
250 250
B. 3D CAMPLATE CSP-FF91-00 Click-on Twin CSP-FF91-04 Click-on Twin
1/8” to 3/4” 1/8” to 3/4”
“00” “04”
250 250
C. BEADED INSET PART#
HINGE TYPE
CSP-FF90-02 Click-on Twin
Inset
“02”
250
FOR FRAMELESS APPLICATIONS
• Nickel Plated. • Adjustments can be made independently: up and down.
D. SUPER CLICK
• Height and depth adjustable. • Mounts with wood screws (not included).
PART#
HINGE TYPE
DOOR OVERLAY
PLATE PCS. PER TYPE CARTON
PART#
HINGE TYPE
DOOR OVERLAY
PLATE PCS. PER TYPE CARTON
CSP-FR55-00 Click-on Twin Full, Half, Inset CSP-FR55-08 Click-on Twin Half, Inset CSP-FR55-18 Click-on Twin Inset Only
“00” “08” “18”
250 250 250
E. 3D ADJUSTABLE EURO CAM CSP-FR70-00 Click-on Twin Full, Half, Inset CSP-FR70-08 Click-on Twin Half, Inset
“00” “08”
250 250
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
CS-SCREW
6 x 5/8” Zinc Plated Screw 500 pcs. per carton
F-300
HINGES
SOFT CLOSE SYSTEM
This unique design defines a new closing of doors. The motion of the doors is softly slowed down and the door self closes softly and quietly. • Toolless. • Quick and easy to install. • Minimum one set required per two hinges.
OPTION A: SOFT CLOSE FOR CS* HINGES
PART# CS-SOFT NOTE: Does not work with 170° hinges 1 set Full Carton (125 sets)
EACH SET INCLUDES: 1 Soft Close CS adapter with pre-mounted Soft Close. 1 hinge cup cover cap. CS-SCREW 2 hinge arm cover caps.
6 x 5/8” zinc plated screw for “CS” hinges. 500 per carton
OPTION B: SOFT CLOSE FOR CST* HINGES
PART# CST-SOFT 1 set Full Carton (125 sets)
EACH SET INCLUDES: 1 Soft Close CST adapter. 1 Soft Close CST damper. 2 hinge arm cover caps.
SPECIALITY HINGES
DOWELED (Knock-In)
95° OPENING FOR THICK DOORS
SPECIFICATIONS:
Works with doors up to 1-1/8” thick.
BORING PATTERN
OVERALL CUP
SIDE VIEW
FULL OVERLAY HALF OVERLAY
PART#
DESCRIPTION
CS5-95D-F Full Overlay (00) Thick Door CS5-95D-H Half Overlay (08) Thick Door CS5-95D-I Inset (15) Thick Door
PCS. PER CARTON
INSET
250 250 250
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
SOFT CLOSE
A, B, C
D, E
See Option A, above.
CORNER HINGES DOWELED (Knock-In)
SPECIFICATIONS: CS/45-IV & CS/90-IV BORING PATTERN
90° CORNER 45° CORNER
PART#
DESCRIPTION
CS5/45-IV 45° Corner CS5/90-IV 90° Corner CS/D-PCC Pie Cut Corner
OVERALL CUP
SIDE VIEW
PIE CUT CORNER
PCS. PER CARTON
SPECIFICATIONS: CS/D-PCC
125 125 125
BORING PATTERN
PLATES FOR FACE FRAME APPLICATIONS
PLATES FOR FRAMELESS APPLICATIONS
SOFT CLOSE
A, B, C
D, E
See Option A, above.
OVERALL CUP
SIDE VIEW
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
CS-SCREW
6 x 5/8” Zinc Plated Screw 500 pcs. per carton
F-301
MISCELLANEOUS HINGES OPI SERIES - SOFT CLOSE PNEUMATIC HINGE PRODUCT FEATURES:
• NO MORE SLAMMED DOORS! Pneumatic cylinder provides soft closing action. • NO EXTRA ACCESSORIES! Built-in cylinder makes closing doors easy. • Clip on system. • Screws included. PART#
DESCRIPTION
110° Full Overlay Hinge with Plate
SFT-HINGE-F
CONCEALED METAL HINGE
ONE HINGES DOES IT ALL; FITS ANY FRAME-LESS CABINET.
The CONCEALED METAL HINGE is surface mounted - this means no routing of door or cabinet. Made of cold rolled steel with a bright nickel finish and a stainless steel spring. All pins & rivets are zinc plated for long life. • Overlay, adjustable from 0 to 3/4". • 3/8" inset. • Full inset. • Allows door to open over 150°. • Built-in closing mechanism. • Screws not included.
3/4" OVERLAY
*Applications: FULL INSET
3/8" INSET
PART#
SG-225
*Application drawings are based on use with a 3/4" thick door.
DAMPING ACCESSORIES FOR CABINET DOORS CLIP-ON SOFT CLOSE HINGE ATTACHMENT
PRODUCT FEATURES:
• Grey plastic. • Left and Right side. • Can be adjusted for various door clearances. • Suitable for most Euro Hinges. PART#
SFT-CLIP-R SFT-CLIP-L
DESCRIPTION
Right Left
SOFT CLOSE DAMPERS PRODUCT FEATURES:
• Softens the impact of the door against the cabinet. •C an be recessed into the cabinet side or mounted to the table. •S uitable for double doors, inset doors & face frame applications. • Use 2 dampers for door heights over 3’. PART#
SFT-MAD-GY
F-302
MEDIUM DUTY
RECESSED
SIDE MOUNTED
GRASS INSTITUTIONAL HINGES PRODUCT FEATURES:
• All metal diecast construction for extreme durability in black & nickel finishes. • Toolless snap-on mounting for quick & easy installation. • Side-to-Side adjustment of -2mm(1/16”) & height adjustment of +/-2mm(1/16”). • Hinge cup has 35mm diameter with a 45/9.5mm boring pattern (similar to Blum). • Designed for Frameless Cabinet Construction. HINGE CUP FULL OVERLAY HINGE ARM HALF OVERLAY HINGE ARM COMMON PANEL (INSET) HINGE ARM EURO-SCREWS FOR HINGE ARM
1/2” OVERLAY INSTITUTIONAL HINGE Material: Steel
• Opening angles range from 180° - 270° depending on your application. • Meets ANSI/BHMA A 156.9 - 2003 Grade 1 Requirements when the screw & adjustment tabs are in place. •C over caps (included) conceal mounting screws. • One hinge cup works arms.
TYPE SCREW-ON DOWELLED 270°
MB-8310-BK
MB-8310-N
230°
MB-8510-BK
MB-8510-N
180°
MB-8610-BK
MB-8610-N
44 lb. Load Rating
32mm OVERLAY INSTITUTIONAL HINGE Gloss White, Gloss Black, Dull Chrome
Material: Steel
• 2 3/4" Five Knuckle Hinge. • Radius Ground Hospital Tips For Increased Safety. • Designed for 32mm Hole System. • Radius Corners For Easy Mortising • ANSI/BHMA A156.9 Grade 1.
DIMENSIONS A B C
PART#
Material: Steel
A
Made in USA.
DIMENSIONS B C
IH-E60- 3/4" 3/4" 23/32" IH-G60- 3/4" 13/16" 23/32"
INSHIN-34 3/4” 3/4” 23/32”
FLAP DOOR HINGE
* 2 screws required for hinge arm mounting
MB-SCREW* #6 x 13.5mm Euro Screw
N/A
• 2-3/4” Five Knuckle Hinge. • Designed for 32mm hole system. • Radius ground hospital tips. • Matte Chrome finish.
PART#
PART # BLACK NICKEL MBS-8010-BK MBS-8010-N MBD-8010-BK MBD-8010-N
DOUBLE ACTION SPRING HINGE
NO-BORE GLASS DOOR HINGE
• Allows door to swing back and forth. • For doors up to 1-1/8" thick. • Screws & instructions included. • Dimensions: 4-7/8" high x 3-1/2" wide.
• For 1/4” Glass.
Material: Steel
Material: Steel
• Opening angle 90°. • For flap door thickness up to 20mm. • Cup boring cover. • Bottom and Flap door are flush inside the cabinet when doors are open. • 3-D Adjustable. PART#
FLAP-735
PCS. PER CARTON
100
PART#
COLOR
DAH-BRS Brass DAH-BLK Black
PART #
COLOR
30023-CHR Chrome
F-303
MOUNTING TEMPLATES & BORING TOOLS
So! Where do you want the holes? Euro-32 Template
• To Drill 5mm or 1/4” holes. •U se on cabinet parts or constructed cabinets. •U se with the Euro-Bit SelfCentering Drilling Tool (EB). • Drill for carcass assembly. • Use for 32mm construction. • Aluminum bushings for long life.
E32T.....
Euro Trimmer
• Laminate trimmer with Teflon® square bearing.
ET 1/2” Dia. x 1/4” Shank ET3/4 3/4” Dia. x 1/4” Shank
Euro-Bit
Euro-32 Template
Concealed-Hinge Boring Tool
• Use with any 3/8” drill motor or drill press. • Compact and portable, ideal for shop and field operations. • Automatic boring depth stop. • Special non-skid base protect work and inhibits movement during boring operation. • Centerline mark provides easy alignment. • 32mm compatible. • Uses standard 35mm x 37 mm boring bit, not included.
ED50-U ED-KIT (drill press kit) ED3557 (35mm x 57mm Bit)
Self-Centering Drilling Tool
• Use with other tools shown. • Tip has excellent chip ejection. • Interchangeable bits: 1/4” Bit – 1/4” shelf pins. 5mm Bit – 5mm shelf pins or system screws. 7/64” Bit Adapter – esigned to be used with standard 7/64” d bit (not included). • Uses carbide tipped brad point bits or a 7/64” bit (not included).
EB (EURO BIT) EB2570 (1/4” X 7mm Bit) EB570 (5mm x 70mm Bit) 7/64 x 40mm (7/64” x 40mm Bit adaptor)
Euro-Handle-It
Handle & Knob Drilling Tool
• V-notch in fence for use in installing handles at a 45-degree angle. • English and metric scales for use on all handles. • Height adjustment to center of a 12” high drawer front. • Center reference line for extra wide drawer fronts. • Movable positioning stop for use on drawer fronts of the same size. • Installs handles as large as 24” (600mm). • Made of polycarbonate (jet aircraft canopy material). The tool is virtually unbreakable.
Replacement Bearings
ET1/2-Bearing 1/2” Bearing Only ET3/4-Bearing 3/4” Bearing Only
EHIT
Euro-Jig
Concealed Hinge Installation Tool • Quickly and accurately locates European concealed hinge plates. • Lightweight, durable construction. • Will locate all makes of concealed hinges regardless of cup size. • “V” locator templates set to door hinge arm, then transfers layout to cabinet. • Minimal setup time allows for changing hinge locations quickly. • Works for overlay and inset conditions. • Will effectively set doors up to 50” tall. • Length, 28-3/4”, designed to clear existing countertops make Euro-Jig ideal for refacing operations. • Requires Euro-Bit Self-Centering Drilling Tool (EB)
EJ200
F-304
Euro-Uniguide
For fast, accurate drawer guide positioning
• Locates pilot holes for all brands of drawer guides: European and American made. • I nfinite vertical adjustment for various drawer sizes and layouts. • For use with regular and full extension guides. • Positions guides for overlay and inset conditions. • Install 1 to 4 guides in a single operation. •N o vertical layout marks required as tool is set directly to tape measure. •L ength, 28-3/4”, designed to clear existing countertops, making Uniguide ideal for refacing operations. • Requires Euro-Bit Self-Centering Drilling Tool & Bit.
EUG
CONTINUOUS STEEL PIANO HINGE AVAILABLE FINISHES: Nickel, Brite Brass, *304 Grade Stainless Steel, Statuary Bronze, Electro Black Lacquered 4 SIZES: 1-1/4"x 72", 1-1/2" x 72", 2" x 72" & 1-1/4" x 100'
1 1-1/4" x .030* x 72" PART # PH-28-72N PH-28-72B
FINISH Nickel Brite Brass
Nicke
l (N)
PH-28-72BZ Statuary Bronze PH-28-72BLQ PH-28-72SS
Electro Black Lacquered *304 Grade Stainless Steel
Brite Bra ss (B)
2 1-1/2" x .040* x 72"
PART # FINISH PH-40-72N Nickel PH-40-72B Brite Brass PH-40-72BZ Statuary Bronze Black PH-40-72BLQ Electro Lacquered *304 Grade PH-40-72SS Stainless Steel
Statuary Bronze (BZ)
3 2" x .040* x 72"
PART # FINISH PH-64-72N Nickel PH-64-72B Brite Brass PH-64-72BZ Statuary Bronze Black PH-64-72BLQ Electro Lacquered *304 Grade PH-64-72SS Stainless Steel
k Electro Blac LQ) Laquered (B
de Gra (SS) 304 Steel s s e l tain
* All Stainless Steel Hinges are .037" Thick
4 100 FT. COILS
S
1-1/4" x .030" x 100'
PART # PH-28-100N PH-28-100B
FINISH Nickel Brite Brass
SOLD IN FULL COILS ONLY!
D
A
Steel Pin
B
C
1 2 3 4
A 1-1/4" 1-1/2" 2" 1-1/4"
DIMENSIONS B C 2" 1/2" 2" 1/2" 2" 1/2" 2" 1/2"
NOTE: All measurements are approximate; please refrain from drilling your holes until product is received. D .750" .876" 1.13" .75"
If you are interested in aluminum hinges or custom lengths, please inquire.
PIANO HINGE FLAT PHILLIPS SCREWS PART # FINISH SCR-5625FHZ Zinc SCR-5625FHB Black SCR-6625FHZ Zinc
WORKS WITH all piano hinges except PH-*-72SS only PH-*-72SS
(stainless steel hole is larger)
HEAD SIZE #5 x 5/8" #5 x 5/8" #6 x 5/8"
For Our Complete Line Of Screws See Page 267
72 screws are required per piece.
F-305
HINGES TOTALLY CLEAR FLAT HINGES
CLEAR P.E.T.G./PVC with glue groove 5 Ft. Lengths
EXTRUDED HINGE
CLEAR ACRYLIC/PVC 5 Ft. Lengths
CLEAR URETHANE & ACRYLIC 4 Ft. Lengths U.V. Stabilized for Outdoor Use!
.50
.375 1.375
PART # 696H
PART # 9888H
.50
PART # F2000-CL
ACRYLIC HASP
PLASTIC PIANO HINGE
Clear, Black or White 2-3/8” Long x 1-1/16” Wide x 1/8” Thick
Clear or Black 12” Long x 1-3/4” Wide
Bottom section of hasp is reversible for either corner or flat mounting.
• Replaces metal hinges that require on to drill, tap or rivet. • Outer bonding surface is wide for added bonding strength. • Easily cuts to small size without falling apart.
Predetermine assembly before inserting pin completely! PART # COLOR HSP-110-CL Clear HSP-110-BK Black HSP-110-WH White
Part # Material PH-175-12CL Acrylic PH-175-12BK ABS
PLASTIC HINGES Clear Acrylic Hinge
150-1375
END VIEW
175-150
TOP VIEW
Clear Economy Acrylic Hinge
END VIEW
Polypropylene Hinge Black or White
Screw Size Recommended #10 Countersunk (not included)
TOP VIEW
Larger Quantities Available - Please Inquire
PART # 150-1375 175-150
PART # EC175-150
Won’t Rust - Quiet - Long Life PART # COLOR 200-200-WH White 200-200-BK Black
MONSTER HINGE™
Material: Acrylic DR101 (Clear), ABS (Black)
Indestructible: New “patent pending” design makes this hinge virtually unbreakable! No other similar hinge on the market comes close to the strength of this dynamic hinge! Ribbed: We have eliminated the barrel section, the weakest part of a hinge, and replaced with large ribbed sections unlike any hinge in the display industry for incredible strength! Larger pin diameter (.190” dia.) too! Size: 1-5/16” L x 2” W x 1/2” T (33mm x 51mm x 13mm)
F-306
PART # MONSTER-HINGE-CL MONSTER-HINGE-BK
DESCRIPTION Clear Acrylic 1-5/16” L x 2” W x 1/2” Thick Hinge Black ABS 1-5/16” L x 2” W x 1/2” Thick Hinge
PLASTIC PANEL HINGE
103-634- Fits 1/8” Panels 103-571- Fits 3/16” Panels 103-635- Fits 1/4” Panels 103-637- Fits 3/8” Panels 103-4175- Fits 1/2” Panels
Polypropylene 12 Ft. Lengths Black, White & Brown
108-640-
Polypropylene 12 Ft. Lengths Black, White & Brown
108-641-
Fits 1/8” Panels
PVC Black, White & Clear
Polypropylene 12 Ft. Lengths Black, White & Brown
Fits 3/16”-1/4” Panels
PVC Black, White & Clear
Polypropylene 12 Ft. Lengths Black, White & Brown
P4506-CL
Fits 3/16” Panels
PVC - Clear Clear with White Web
Polypropylene 12 Ft. Lengths Black, White & Brown
P4440-CL
Fits 1/4” Panels
PVC - Clear Clear with White Web
PLASTIC TEE HINGE 103-631-
For 1/2” Panel
Polypropylene 12 Ft. Lengths Black, White & Brown USE S055 SLOTTER
103-630-
For 5/8” Panel
103-632-
For 3/4” Panel
Polypropylene 12 Ft. Lengths Black, White & Brown USE S1/S7 SLOTTER
Polypropylene 12 Ft. Lengths Black, White & Brown USE S1/S7 SLOTTER
FLAT HINGE 103-639-
.035/.045 Thick - Polypropylene 100 & 500 Ft. Coils Black, White & Brown
9888H
CLEAR P.E.T.G./PVC with glue groove 5 Ft. Lengths
p4169-CL
103-638-
.086 Thick - PVC 100 Ft. Coils - Clear with White Web
.062/.070 Thick - Polypropylene 100 & 500 Ft. Coils Black, White & Brown
696H CLEAR ACRYLIC/PVC 5 Ft. Lengths
F-307
OPI ECONOMY SERIES: “LIFT - UP” GAS SPRING PRODUCT FEATURES:
10.8”
3.6” .24”
• Suitable for face frame and frameless applications. • Suitable for wood and aluminum doors. •N o lubrication required, (NOTE: If lubricated, product will not operate properly). •S et includes: 2 gas springs, 2 sets of mounting brackets and screws. •F inish: Silver, all metal construction.
4.8” .6” 1.20”
2.04”
.4” .24”
.08”
PART # FORCE LFTUP-100SV 100n (22.5 lbs) LFTUP-150SV 150n (33.7 lbs)
1” 1.28” 1.86”
Gas Springs Selection Guide
2 -3 kg 3.5 - 4.5 kg 5 -6 kg Door Weight (5 - 7 lb) (8 - 10 lb) (11 - 13 lb) Door Height Force Force Force 254 - 305 mm 100 N 100 N 100 N (10 - 12 in) (22.5 lb) (22.5 lb) (22.5 lb) 330 - 380 mm 100 N 100 N 150 N (13 - 15 in) (22.5 lb) (22.5 lb) (33.7 lb) 406 - 457 mm 100 N 100 N 150 N (16 - 18 in) (22.5 lb) (22.5 lb) (33.7 lb) 483 - 533 mm 100 N 150 N (19 - 21 in) (22.5 lb) (33.7 lb) 559 - 610 mm 100 N 150 N (22 - 24 in) (22.5 lb) (33.7 lb)
.3”
Installation 4”
3.2”
3.60”
10.4”
10.2”
90° .4”
.4”
8mm
10” .4” 15mm
OPI ECONOMY SERIES: SOFT STAYUP HINGE
CHROME PLATED EURO HINGES
PRODUCT FEATURES:
This multipurpose stay can be used on “Drop Down” and “Lift up Doors”. • This stay will open as wide as 100°, depending on the adjustment this stay “brakes” the door as it holds in intermediate positions. • Adjustments can be made using a 4mm allen key. • 1 piece recommended for doors under 8 lbs. and 2 pieces for doors ranging from 8 lbs. to 16 lbs. • Non-handed. • Chrome plated, all metal construction.
4.24” 1.28”
.48”
6.4”
1.28”
F-308
1.28” .4”
.48”
PART # SSH-2007
Can be used for either frameless or framed cabinet applications. Opening angle can be adjusted from 45°-90° PART #
DESCRIPTION Euro Hinge 6552-ETH-10 False Front Hinge
ADJUSTABLE SOFT DOWN STAY
Keeps Flap/Lids from slamming shut & Flying Open PRODUCT FEATURES:
• Upward opening flap •C losing speed adjusts with the turn of a screw •O blong holes of the mounting plate allow flap opening angle adjustable from 80° to 100° • Right and left hand mounting •F or Piano/Butt/Concealed Hinges • Supplied with screws • Material: Zinc Alloy, Steel • Finish: Bright Nickel PART # TYPE NSDX-35L Left Hand NSDX-35R Right Hand
Torque Calculation: Torque = Door Height x 1/2 x Door Weight Per Piece: 20 - 70 kg • cm (19 - 60 lbs • inch) Per Pair: 40 - 140 kg • cm (38 - 120 lbs • inch)
LID STAY PRODUCT FEATURES:
Max 75° opening
Max 90° opening
• Positive stop to keep flap open • Left or right hand installation • 304 stainless steel/satin finish • 33 lbs. load each • Screws not included • Must install parallel to sidewall
PART # LS-195
PART # LS-270
Conversion Formula: mm ÷ 25.40 = inch Example: 32mm ÷ 25.40 = 1.25 inches
SOFT CLOSING MECHANISMS for over the top flipper doors gREAT FOR OFFICES
PRODUCT FEATURES: • 11 lb. capacity • Doors will not slam shut • Adjustable closing speed • Successfully passed 30,000 open/close cycles • Material: Steel, Zinc Diecast and Plastic • Screws included
Conversion Formula: mm ÷ 25.40 = inch Example: 32mm ÷ 25.40 = 1.25 inches
TRAVEL SLIDE PART # LENGTH LENGTH OVL-14 355.6 mm 249.2 mm OVL-15 381 mm 274.6 mm
F-309
VERTICAL SWING UP MECHANISM
PRODUCT FEATURES:
• Unique mechanism will help lift doors and hold at the open position. • Sleek & Compact design. • Easy installation • Adjustable mounting plate •P atented LAPCON technology provides smooth and quite motion. •S uccessfully passed 30,000 open/close private cycle tests. PART # SLUN-3 SLUN-4 SLUN-5
DOOR WIDTH 600-900mm (23-5/8” to 35-7/16”)
135
32.5 26
Dimensions in Millimeters
DOOR WEIGHT (kg) 2.5 - 3.5 (5.5 - 7.7 lbs.) 3.6 - 4.5 (7.9 - 9.9 lbs.) 4.6 - 5.2 (10.1 - 11.4 lbs.)
3
HORIZONTAL BIFOLDING DOOR MECHANISM
20 (Board Thickness)
Requires Hinge
Dimensions in Millimeters
PRODUCT FEATURES:
• SOFT CLOSE • Constructed of nickel plated steel with light gray plastic housing. • No tracks or guides required. • Handle positions at the bottom of the door. • Patented LAPCON technology provides smooth and quiet motion. • Can be set for a 90˚ or 105˚ opening. • Smaller mechanism does not intrude into cabinet space. • Sold in pairs with all hardware included for one door. • Requires piano hinge or concealed hinge. • Can be used with aluminum or wood doors.
F-310
DOOR WIDTH
DOOR HEIGHT
17-23/32” to 35-7/16”
12-19/32” - 14-9/16”
DOOR WEIGHT 5.5 - 7.7 lbs 7.9 - 9.9 lbs 9.9 - 12.1 lbs
352.5
Door
32
425 (Door travel length)
38
74.3
34
31
18 35
DOOR HEIGHT 390-450mm (15-23/64 to 17-23/32”)
PART # HBFN-2M HBFN-3M HBFN-4M
95
Top board
SOFT DOWN STAY (SHORT ARM)
SDS-100-TV/TVZ Black
Product Features
• For DOWNWARD-OPENING FLAP DOOR with piano, butt or drop hinges, (SOLD SEPARATELY) • Designed for small height door application • SDS-C100TV has a catch to hold the lid closed in position • SDS-100TV does not have a catch feature • Designed to be used with magnetic catch or touch latch • Torque Calculation: Torque = Door Height x 1/2 door Weight
White
101 (3.937”) 62 (2.441”) 31.5 (1.240”)
Mounting Plate SDS-A
(.768”) 19.5
65 (2.559”)
62
9 (.354”)
(2.441”) 20 (.797”)
(.472”)12 (1.260”) 32
HINGE TYPE Single Knuckle Hinge Drop Hinge PART #
SDS-100W-TV SDS-100B-TV SDS-C100W-TV SDS-C100B-TV SDS-100W-TVZ SDS-100B-TVZ SDS-C100W-TVZ SDS-C100B-TVZ
COLOR
White Black White Black White Black White Black
20 (.797”)
4 (.157”)
A 60 (2.362”) -
B 73(2.874”) -
(1.13”) 28.28
10.5 (.413”)
38 (1.496”)
22 (.866”)
S=Overlay Coverage in case of drop hinge
C 49+S (1.929”)
D 62+S(2.441”)
TYPE
* TORQUE PER PIECE
* TORQUE PER PAIR
W/O Catch
5-12kgf•cm (4.3-10.4 lbs•in)
10-24kgf•cm (8.7-20.1 lbs•in)
With Catch
5-12kgf•cm (4.3-10.4 lbs•in)
10-24kgf•cm (8.7-20.1 lbs•in)
W/O Catch
16.5-37.6kgf•cm (14.3-32.6 lbs•in)
33-75.2kgf•cm (28.6-65.2 lbs•in)
With Catch
16.5-37.6kgf•cm (14.3-32.6 lbs•in)
33-75.2kgf•cm( 28.6-65.2 lbs•in)
* Torque measurement is referring to kilograms of force per centimeter (kgf•cm) or pounds of force per inch (lbs•in).
F-311
SOFT CLOSING LID STAY
SLS-ELAN
Product Features
(1.260”) (6.614”) 32 168
(6.300”) 160 25 (.984”)
59 (2.323”) 70 (2.756”)
(1.102”) 26
27 (1.063”)
• LAPCON stay for upward-opening flap doors. • Lift-assist mechanism for extra light-opening. • Damper equipped for soft & silent closing at the end. • Slim design and installed location maximizes space inside of cabinet. • Simple installation by aligning body to edge of cabinet. • Single or Pair use allows wide range of door size/weight. • Recognized by LGA for 40,000 cycles. • Optional bracket for aluminum frame door available, please inquire.
8 (.315”)
270 (10.630”)
(7.283”) 185
47 (1.850”)
19mm (.748”) overlay use shown (Left-hand side mounting)
DOOR HEIGHT (inches)
12” 13” 14” 15” 16” 17” 18” 19” 20” 21” 22” 23” 24” 25” 26” 27” 28”
PART #
DOOR WEIGHT RANGE TABLE (LBS.)
SINGLE USE M-TYPE H-TYPE MIN. MAX. MIN. MAX.
PAIR USE M-TYPE H-TYPE MIN. MAX. MIN. MAX.
8.0 10.8 10.8 14.5 16.0 21.7 7.4 10.0 10.0 13.4 14.8 20.0 6.9 9.3 9.3 12.4 13.7 18.6 6.4 8.7 8.7 11.6 12.8 17.3 6.0 8.1 8.1 10.9 12.0 16.3 5.6 7.6 7.6 10.2 11.3 15.3 5.3 7.2 7.2 9.7 10.7 14.4 5.1 6.8 6.8 9.2 10.1 13.7 4.8 6.5 6.5 8.7 9.6 13.0 4.6 6.2 6.2 8.3 9.1 12.4 4.4 5.9 5.9 7.9 8.7 11.8 4.2 5.7 5.7 7.6 8.3 11.3 4.0 5.4 5.4 7.3 8.0 10.8 3.8 5.2 5.2 7.0 7.7 10.4 3.7 5.0 5.0 6.7 7.4 10.0 3.6 4.8 4.8 6.4 7.1 9.6 3.4 4.6 4.6 6.2 6.9 9.3 Single or Pair use depending on door size
TYPE
TORQUE PER PIECE
MATERIAL
SLS-ELAN-MR (Right) M-Type 55-75 kg-cm • Aluminum SLS-ELAN-ML (Left) (Medium Duty) (48-65 lbs•in) • Steel SLS-ELAN-HR (Right) H-Type 75-100 kg-cm • ABS (Heavy Duty) (65-87 lbs•in) SLS-ELAN-HL (Left)
F-312
21.7 20.0 18.6 17.3 16.3 15.3 14.4 13.7 13.0 12.4 11.8 11.3 10.8 10.4 10.0 9.6 9.3
29.0 26.8 24.9 23.2 21.8 20.5 19.3 18.3 17.4 16.6 15.8 15.1 14.5 13.9 13.4 12.9 12.4
FINISH/ COLOR
• Anodized • Galvanized • Light Gray
LATERAL OPENING DOOR HINGE Product Features
• Lateral swing mechanism. • Ideal for tight front space application. • Allows doors to swing out laterally in a small radius. • Doors will not get in the way when fully opened thus providing full access to the cabinet. • Door has free swing & soft close. • Easy installation. Designed for standard 32mm system mounting, with snap-on hinge. • 4-way adjustment. • Can be used in single or double door configuration. • Ideal for cabinets and hiding flat screen t.v.’s. • Use with frameless cabinets.
OPENED
CLOSED
ANODIZED NICKEL FINISH ~ STEEL / ALUMINUM MATERIAL
264 (10-25/64”)
70 (2.756”)
Bracket- Sold Separately
Door Width 550-650 (21.656-25.594”)
DOOR THICKNESS
15-24mm 19/32” - 61/64” 15-24mm 19/32” - 61/64”
DOOR WEIGHT
max 7kg 15.4 lbs./door max 9kg 19.8 lbs./door 546 (21-1/2”)
600-900mm 23-5/8” - 35-7/16” 600-900mm 23-5/8” - 35-7/16”
FACE FRAME CABINET OPTIONS
Door (Max. 9kg) (19.8 lbs.)
Max. 490 (19.291”)
Door Thickness 15-24 (.591-.945”)
DOOR HEIGHT
Door Height 600-900 (23-5/8”-35-7/16”)
400-500mm 15-3/4” - 19-11/16” 550-650mm 21-21/32” - 25-19/32” 546 (21-1/2”)
LIN-X600
DOOR WIDTH
Max. 490 (19.291”)
Door Height 600-900 (23-5/8”-35-7/16”)
LIN-X450
236 (9.291”)
68 (2.677”)
Door Width 400-500 (15.748-19.685”)
PART #
LIN-X600
70 (2.756”)
Door Thickness 15-24 (.591-.945”)
Door (Max. 7kg) (15.4 lbs.)
68 (2.677”)
236 (9.291”)
LIN-X450
NOTE: When working with taller/heavier doors, please inquire!!! Many options available!
Optional bracket to use LIN-X450 & LIN-X600 with face frame cabinets.
FFCB-HG-1
264 (10-25/64”)
PARTS INCLUDED: CLOSE-UP:
Hinge Body (Closed)
LIN-X-SET • Hinge Body: 2 pcs. •Connecting Bar: 1 pcs. • Mounting Plates: 2 pcs. •Cover Cap: 2 pcs.
Hinge Body (Open)
EACH BASIC KIT DOES 1 DOOR
F-313
STAINLESS STEEL HYDRAULIC DOOR CLOSER
Product Features
• 304 Stainless steel body with aluminum cylinder and steel pin/shaft. • Bracket arm catches the roller for self closing at approximately 10º. • Silent operation, the hydraulic cylinder absorbs shock, preventing the door from slamming shut. • Easy installation, ideal for retro-fit. • Works with a maximum door width of 43-5/16”. • Maximum door weight of 176 lbs.
JFR-021205
DOOR STOPPER Product Features
• Strong magnet holds door in the open position. • 17.6 lbs. of magnetic force per assembly. • Can be mounted on either the floor or the wall. • Optional anchor bolt available for installing on concrete surfaces. • Available in ivory or brown.
PART #
SMDH/IVY SMDH/BRN ANCHOR-SMDH* *Optional
F-314
SOFT CLOSING DAMPENING HINGE
HG-JHM16/20 Product Features • No more lids that slam shut! This hinge has a built-in soft close dampening mechanism. • Mortise mounting. • Sold in pairs, handed. • Choice of Black or White cover. • Ideal for small to large lids. • Calculate torque required to determine which hinge will work best for your application. • Torque Calculation: Torque = Door Height x 1/2 x Door Weight. • For upward opening applications only.
HG-JHM16
HG-JHM20
1.97”
2.126”
Damping Direction
2.126” HG-JHM16
HG-JHM20
1 4
2.60”
.118”
.157”
Bracket / Mounting Plate
3 No.
1 2 3 4
2
PART NAME MATERIAL FINISH / COLOR Bracket Polyacetal Black Mounting Plate Aluminum Black Face Plate ABS Black / White Damper 304 Stainless Steel Plain
Black Cover
PART #
HG-JHM16-34 HG-JHM16-50 HG-JHM16-BL HG-JHM16-WT HG-JHM20-80 HG-JHM20-BL HG-JHM20-WH
White Cover
COLOR DESCRIPTION
Black Black White Black Black White
*TORQUE PER PAIR
Body
17.4 - 29.5 lbs•in 29.5 - 43.4 lbs•in
Face Plate
-
Body
53 - 70.8 lbs•in
Cover
-
* Torque measurement is referring to pounds of force per inch (lbs•in)
F-315
POLYPROPYLENE - WHITE & BROWN - 12 FOOT LENGTHS K101-4079
PLASTIC SLIDING DOOR TRACK UPPER TRACK For: K101-606, K101-610, K101-601
LOWER DOUBLE FLAT TRACK For 3/4” Doors
LOWER DOUBLE FLAT TRACK For 5/8” Doors
K101-4079-
K101-601-
K101-610-
K101-606-
STYRENE
LOWER SINGLE FLAT TRACK BROWN, WHITE, BLACK, ALMOND
100/500’ coils
R26-62 K101-610
NYLON NON-LOCKING GLIDES
Nylon Glides Are Recessed Into The Door
R26-62BE
For Use with: K101-606 K101-610 K101-601
1/4” x 1/4” x 1”
Mounts onto 1/4” mortise on the bottom of each door with a brad nail.
180-
No Glides or Wheels Needed – For Light Weight Doors
For 1/8” Doors
*5/32” gap
Styrene White - Black - Brown 12 Ft. Lengths
140-
For 1/4” Doors
120-
For 1/2” Doors
*9/16” gap
*5/16” gap
Styrene White - Black - Brown Also Available in Beige 12 Ft. Lengths
340-
For 3/4” Doors
*13/16” gap
Styrene White - Black - Brown Also Available in Beige 12 Ft. Lengths
R101-603-BR
For 3/16”-1/4” glass/panel Anti-Rattle Feather Track Polypropylene- Brown 12 Ft. Lengths
Styrene White - Black - Brown Also Available in Beige 12 Ft. Lengths
NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.
PLASTIC MIRACLE TRACK SLIDING DOOR TRACK SYSTEM WITH WHEELS
12 Ft. Lengths - Available in Silver Gray & Black
MT38-
For 1/4” Doors
HIGH QUALITY EASY-ROLL METAL BALL BEARINGS WITH ECONOMY OF PLASTIC TRACK. NOTE: CASE PRICES
Complete - 2 Tracks, 1 Dual Wheel Per Running Ft.
Rough Opening Less 7/8” = Door Size
For additional wheels, order Part #MTR
MT39-SG
For 1/4” Doors
PLASTIC MIRACLE TRACK II SLIDING DOOR TRACK SYSTEM WITH WHEELS 12 Ft. Lengths - Available in Silver Gray
• Lower track has sidewalls to prevent rollers from slipping off track • 1” (25.4mm) shoe allows superior gripping of glass or plywood doors. • Deep upper track to allow extra clearance and easy installation. • Zinc plated rollers with plastic wheel. • Track & shoe material is rigid PVC.
- OUR MOST POPULAR ASSEMBLY-
F-316
Complete Set Consists Of: 1 x 12 Ft. Length Upper Track 1 x 12 Ft. Length Shoe 1 x 12 Ft. Length Lower Track 1 Wheel Per Running Ft.
For additional wheels, order Part #MTR2
ALUMINUM SLIDING DOOR TRACK 12 FOOT LENGTHS
ALU7474-M
M
FINISH CHART
Mill As extruded - may or may not have “scratches”/die lines. Dull Finish.
ALURC4-12
Galvinized Steel
Wheels every 4-1/2”. Use 2/3 of the track with wheels. Example:
6 ft. opening use 4 ft. of roller system.
ALUSH2-12
For Up to 1/4”Doors Galvinized Steel
ALUT18-M
For 1/8” Doors
ALUT14-M
For 1/4” Doors
ALUT12-M
For 1/2” Doors
No Glides or Wheels Needed
ALUT34-M
For 3/4” Doors
ALUT134SP-M For 3/4” Doors
ULTRA PILE DUST SEAL/WEATHER SEAL w/ADHESIVE SELF SUPPORTING PILE IS ALWAYS ON CENTER AND HAS THE INTEGRITY AND CONSISTENCY TO ENSURE A TIGHT SEAL.
50' Minimum Coil
MANY APPLICATIONS: Windows Doors Showcases PART# DESCRIPTION COLOR DS-150-GY .270 W x .150 H Gray DS-200-GY .270 W x .200 H Gray
F-317
SLIDING DOOR FITTINGS SLIDING DOOR SYSTEM FOR FURNITURE AL1535 GLASS & WOOD:
Ideal for bypass glass or wood doors in furniture applications.
Product Features:
• Ball bearing high quality rollers for a silent & smooth glide. • Stoppers are installed inside the track. • One track works with both glass & wood carrier kits. ALUMINUM TRACK (Clear Anodized Finish) • Aluminum track available in two lengths. AL1535-TRK6 • Works as both upper & lower track. 6.5 Ft. Lengths • Glass carrier works with 5/32-1/4” thick doors up to 33 lbs. Note: Must bore holes in glass for installation before tempering • Wood carrier works with 5/8” thick doors up to 33 lbs. AL1535-TRK10 10 Ft. Nominal Lengths
For Glass
GLASS DOOR CARRIER KIT FOR 2 DOORS Each Kit Includes: 4 carriers, 4 top guides w/clip device, 8 finishing caps, 4 stoppers w/retention device & screws.
CARRIER INSTALLATION
For Wood
GUIDE INSTALLATION
AL1535-GKIT
WOOD DOOR CARRIER KIT FOR 2 DOORS Each Kit Includes: 4 carriers, 4 top guides w/clip device,, 4 stoppers w/ retention device & screws.
AL1535-WKIT
F-318
CARRIER INSTALLATION
GUIDE INSTALLATION
SLIDING DOOR FITTINGS SLIDING DOOR SYSTEM FOR FURNITURE D25:
Ideal for bypass wood doors in furniture applications.
PVC TRACK (finishes below) A
D25-TRK10- 10 Ft. Nominal Lengths
Product Features:
• Easy to install & regulate. • PVC track available in 6 colors to match any application. • Works as both upper & lower track. • Works with 5/8” thick doors up to 33 lbs.
Choice of Matching Colors:
Silver (SL), Brown (BR), Caramel (CA), Beige (BE), White (WH) & Black (BK)
WOOD KIT
Each Kit Includes: 4 carriers, 4 stoppers, 4 upper guides & screws.
D25-KIT CARRIER INSTALLATION
GUIDE INSTALLATION
TRACK INSTALLATION
F-319
SLIDING DOOR FITTINGS
TOP SLIDING DOOR TRACK FOR WOOD DOORS DN50 FOR 3/4” OR THICKER WOOD DOORS UP TO 100 LB. LOAD CAPACITYN EW ! Ideal for In-line or bypass doors, when two runs of track are used.
1
110 LBS 50 KG BYPASS IN LINE/ INLAY SYSTEM
> 18 mm > 3/4”
DN50-WKIT
1 set required per door
MAX DOOR WEIGHT
NONE NONE
E A
2 Rollers
B
2 Stoppers with retention device
DOOR THICKNESS
MAX DOOR WIDTH
MAX DOOR HEIGHT > 13 mm > 1/2”
N.A. WOOD
> 3 mm > 1/8”
Product Features: • Ball bearing high quality rollers for a silent and smooth glide. • Stoppers with retention device installed inside the track will stop and retain the door in position.
C
1 Floor guide GP-12
D
2 Mounting plates
E
Screws
MIN DOOR FRAME HEIGHT
GRADE 1 ANSI-BHMA *
DOOR FRAME MATERIAL
NO SYSTEM 32
DOOR / TRACK GAP
BALL BEARING PREMIUM
ROLLER
D&E
ALUMINUM TRACK (Clear Anodized Finish) CARRIER TRACK
DN50-TRK6 6.5 ft. Lengths
DN50-TRK10 10 ft. Nominal Lengths 1-23/32” 1/2" > 2-1/2”
WOOD DOOR CARRIER KIT
3/8" 5/8" 3/16"
3/4"
CARRIER INSTALLATION
F-320
TRACK INSTALLATION
GUIDE INSTALLATION
DN50-WKIT
SLIDING DOOR FITTINGS TOP SLIDING DOOR TRACK FOR WOOD DOORS
DN80
N EW
!
FOR 13/16” OR THICKER WOOD DOORS UP TO 176 LB. LOAD CAPACITY Ideal for In-line or bypass doors, when two runs of track are used.
1
176 LBS 110 50 KG 80 BYPASS IN LINE/ INLAY SYSTEM
> 20 18 mm > 13/16” 3/4”
DN50-WKIT DN80-WKIT
1 set required per door
MAX DOOR WEIGHT
NONE NONE
E
Product Features: • Ball bearing high quality rollers for a silent and smooth glide. • Stoppers with retention device installed inside the track will stop and retain the door in position.
A A
2 Rollers
B B
2 Stoppers with retention device
DOOR THICKNESS
MAX DOOR WIDTH
MAX DOOR HEIGHT >16.5 13 mm mm 1/2” > 21/32”
N.A. WOOD
>5 3 mm > 13/64” 1/8”
C C
1 Floor guide GP-12
D D
2 Mounting plates
E E
Screws
MIN DOOR FRAME HEIGHT
GRADE 1 ANSI-BHMA *
DOOR FRAME MATERIAL
NO SYSTEM 32
DOOR / TRACK GAP
BALL BEARING PREMIUM
ROLLER
D&E
ALUMINUM TRACK
(Clear Anodized Finish) CARRIER TRACK
1-3/8”
WOOD DOOR CARRIER KIT
3/8” 1-9/16” 5/8” > 3-3/16”
CARRIER INSTALLATION
TRACK INSTALLATION
DN80-TRK6 6.5 ft. Lengths
DN80-WKIT
GUIDE INSTALLATION
F-321
ALUMINUM SINGLE UPPER TRACK WITH HOLES M
FINISH CHART
Mill As extruded - may or may not have
12 Foot Lengths 150 lbs.
A medium duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.
“scratches”/die lines. Dull Finish.
• Grant Sliding door hardware. • For doors 3/4” and up weighing up to 150 lbs (68 kg). • Precision ball-bearing wheels guarantee a smooth, quiet and long lasting performance. • Heavy duty aluminum l-beam track; jump proof design. • Pivoting rocker arms ensure track-carrier contact. • Bail and socket suspension compensates for minor header misalignment. • Lock nut guarantees permanent positioning. • Vertical adjustment + 3/8” (9.5 mm). • Conforms to ANSI/BHMA standards, Grade 1. • Made in USA.
6” Holes Spaced Every 6” Staggered PART # 561-R
PART # ALU561-M
12 Foot Lengths 325 lbs.
A heavy duty commercial and residential grade sliding door hardware series ideal for design applications which require the movement of heavy panels, space dividers or large doors. • Grant sliding door hardware. • For doors 1” and up weighing up to 325 lbs/door (147 kg/door). • Precision ball-bearing wheels guarantee a smooth, quiet and effortless operation. • Four wheel carrier, center hung for efficient operation. • Vertical adjustment + 1/4” (6.4 mm). • Heavy duty aluminum l-beam track; jump proof design. • Conforms to ANSI/BHMA standards, Grade 1. • Made in USA. For by-passing doors mount parallel tracks For bi-parting doors use an additional set of hardware
6” Holes Spaced Every 6” Staggered
PART # ALU562-M
F-322
PART # 562-R
BY-PASS CLOSET DOOR TRACK SET FOR 3/4” OR 1-3/8” THICK DOORS (Weighing up to 50 lbs. each)
• Simple adjustment with a screw driver • Nylon adjustable non-routing floor guides • Nylon wheel hangers for smooth, quiet operation • Shrink packed with all necessary hardware • Installation instructions included Contents:
1 length of steel track 2 pairs of nylon wheel hangers with installation screws 1 nylon adjustable floor guide 2 brass finger pulls
PART # SDT-400 SDT-500 SDT-600 SDT-800
GLASS FINGER PULLS • 3/4” x 2-3/4” thick with peel and stick adhesive backing.
PART # FINISH 171-CG Clear Glass 171-MG Mirror Glass
TRACK LENGTH 4 ft. 5 ft. 6 ft. 8 ft.
DOOR SIZE 24” 30” 36” 48”
Plastic Finger Pulls
with high quality pressure sensitive adhesive backing. No holes to drill. Peel off protective backing paper and apply directly to surface of glass. 170-WH (WHITE) 170-BK (BLACK) 170-CL (CLEAR)
F-323