Exterior Millwork by jaski singh

2012

EXTERIOR MILLWORK www.panelplus.co

T pgs. 818-833

Balustrade System Transform any ordinary porch, patio balcony or stairway into an impressive sophisticated space. Our weather resistant polyurethane balusters are reinforced with PVC piping & are available in a variety of sizes to fit the scale of your space. Complete you balustrade system with top & bottom rails, newel posts, caps & fastener kits.

Corbels Similar to decorative brackets, our richly detailed corbels have a bolder appearance as they’re intended to look as though bearing weight.

pg. 823

pgs. 862-869

Exterior Millwork

Decorative Brackets Our decorative brackets embellish a homes exterior with victorian and colonial style. These detailed & architecturally accurate brackets add charm & character.

Dentil Blocks Dental blocks serve as a small corbel, creating the look of a large dentil moulding. Available in straight & pitched in several sizes & profiles.

pg. 823

pg. 822

Exterior Polystyrene & PVC Mouldings U.V. stabilized moisture & insect proof, weather proof & more insulated than wood, our exterior plastic mouldings are made from recycled materials. Available in crowns, caps, chair rails, casings & more.

Louvers & Gable Vents Round, octagon, cathedral & triangle louvers are offered as functional with open slats & a screened backing for air flow or decorative with closed slats for use as an accent. High density polyurethane will never rot or decay.

pgs. 820, 828

pgs. 831-833

Exterior Polyurethane Mouldings Dentil mouldings, casings, cornices, crowns, fascia, coves & more are offered in rot proof, weather proof, insect proof & easy to work with high density polyurethane.

pg. 821

Window & Door Trim Create distinction & bring focus to doors & windows by adding crossheads, pediments & pilasters. Completely change & enhance the exterior of any home or business with these weather proof & easy to install winow & door trims. A multitude of sizes available to work for almost any application.

• Door Crossheads pgs. 824-825, 829 • Entrance Trim / Pilaster pgs. 825-826, 830 • Pediments - pg. 825 • Window Crossheads pgs. 824

T-818

Exterior Millwork by

Fypon

T-819

EXTERIOR MILLWORK Exterior Louvers/Gable Vents

Exterior Millwork High Density Polyurethane

Round, Octogon, Cathedral & Triangle Louvers • 45-degree angled slats on functional louvers protect interiors from precipitation.

Shown: rlv24tk

FEATURES • Primed with ultraviolet stable coating. AND •A variety of shapes and sizes complement most architectural styles. BENEFITS • Unlike wood, Fypon louvers resist insect infestation and will not rot, warp, decay or split. • Easy installation.

Functional Louvers

DECORATIVE LOUVERS

Airf

Accent exterior sidewall applications, but also have open slats that allow forair ventilating. Includes a screenbacking to keep insects out.

Have closed non-ventilating slats that do not allow air to pass through. They are used for decorative purposes only to accent exterior sidewall applications

NOTE: If you are ordering a Functional Louver, your rough opening should be approximately 2” smaller around the entire perimeter of the louver. All louvers can be ordered with siding rout for a neat professional finish. Please specify upon

ordering. Part# ROUTED (Rout is a flat 5/8” x 5/8” groove)

DECORATIVE ROUND LOUVER

DECORATIVE OCTAGON LOUVER A 18” 22”

DECORATIVE PART # OLV18 OLV22

FUNCTIONAL PART # -FOLV22

DIA. 16” 18” 22” 24” 28” 30” 36”

DECORATIVE CATHEDRAL LOUVER

A 12” 16” 18” 22” 24” 28”

B 24” 36” 30” 31-1/2” 48” 43”

DECORATIVE FUNCTIONAL PART # PART # CLV12X24 -CLV16X36 -CLV18X30 FCLV18X30 CLV22X31 FCLV22X31 CLV24X48 -FCLV28X43 CLV28X43

DECORATIVE PART # RLV16 RLV18 RLV22 RLV24 RLV28 RLV30 RLV36

FUNCTIONAL PART # -FRLV18 FRLV22 FRLV24 FRLV28 FRLV30 FRLV36

CATHEDRAL LOUVER TRIM WORKS WITH FCLV22X31 & CLV22X31

A 22-3/16”

B 31-11/16”

TRIM WIDTH 3-1/2”

PART # CLV22X31X4F

TRIANGLE LOUVER

Pitch Information

Pitch indicates that incline of a roof as a ratio of the vertical rise to the horizontal run. It is properly expressed as X distance in 12 inches. For example: A roof that rises at a rate of seven inches for each foot of run is designated as having a 7/12 pitch.

NOTE: If you are ordering a Functional Louver, your rough opening should be approximately 2” smaller around the entire perimeter of the louver. QUANTITY DISCOUNTS AVAILABLE. INQUIRE FOR A QUOTE.

T-820

low

48” 48” 60” 60” 64” 65” 66” 76” 84”

PITCH

DECORATIVE

PART #

12” 6/12 TRLV48X12 24” 12/12 TRLV48X24 17-1/2” 7/12 TRLV60X18 22-1/2” 9/12 TRLV60X23 26-1/2” 10/12 TRLV64X27 21” 7-3/4/12 TRLV65X21 22” 8/12 TRLV66X22 19” 6/12 TRLV76X19 17-1/2” 5/12 TRLV84X18

FUNCTIONAL

PART #

-FTRLV48X24 FTRLV60X18 FTRLV60X23 FTRLV64X27 FTRLV65X21 FTRLV66X22 -FTRLV84X18

All louvers can be ordered with siding rout for a neat professional finish. Please specify upon ordering. Part# ROUTED (Rout is a flat 5/8” x 5/8” groove) PL Premium Adhesive PART# SIZE ADH1 10.6oz Cartridge

EXTERIOR MILLWORK Exterior Millwork High Density Polyurethane

Mouldings CORNICE MOULDING

A B C

PART # MLD240-8

LENGTH A B 8’ 3-1/4” 4”

C 11/16”

DENTIL MOULDING A

DOOR/WINDOW MOULDINGS

PART # MLD354-12

A 1”

B 3-1/16”

TOOTH/ SPACE 1-5/8”

LENGTH 12’-2-1/4”

CROWN DENTIL MOULDINGS

PART # LENGTH A B C MLD220-12 12’ 1-3/4” 5-1/2” 3/4”

CLASSIC DENTIL MOULDING

A B

C PART #

MLD411-16 4-1/2” 7” 1/2”

TOOTH/ SPACE LENGTH

1-1/2”

16’

CROWN MOULDINGS

TOOTH/ PART # A B C SPACE LENGTH MLD310-12 1-1/4” 4-1/2” 7/16” 1-1/2” 12’ MLD310-16 1-1/4” 4-1/2” 7/16” 1-1/2” 16’

A B

Works with DTLB 6x4x6, see page 857.

DENTIL FASCIA MOULDING

A B C

PART # A MLD330-12 1-5/8”

B 7”

C 7/8”

TOOTH/ SPACE 2”

PART # MLD452-8 MLD452-12

A 2” 2”

B 3” 3”

CHAIR RAIL MOULDINGS

B C A

B 8”

PART # A MLD610-8 1-1/2”

B 2-3/8”

C LENGTH 1/2” 8’

IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on

C A 8”

LENGTH 12’

COVE MOULDING

PART # MLD583-16

C LENGTH 1/4” 8’ 1/4” 12’

all joints. See page 820 to order PL premium Adhesive, ADH1.

C LENGTH 1/2” 16’

QUANTITY DISCOUNTS AVAILABLE. INQUIRE FOR A QUOTE.

T-821

EXTERIOR MILLWORK Decorative Millwork/

Exterior Millwork High Density Polyurethane

Decorative Brackets

DECORATIVE BRACKETS

• Detailed millwork is architecturally accurate. • Paintable products are double primed with exterior grade ultraviolet stable coating. • Resist insect infestation, will not rot, warp decay or split. • Easy installation.

BKT7X10

BKT6X8

Shown here: GP64X32(Gable Pediment) K4TF(Dentil Block) BKT14X16(Bracket)

PART #

BKT8X8

BKT7X16

A B

BKT10X12

BKT12X12WW

A B C

BKT14X15

T-822

1-1/2” 3” 5-1/2” 2” 1” 1” 3-1/2” 1” 1-1/8”

QUANTITY DISCOUNTS AVAILABLE INQUIRE FOR A QUOTE.

BKT14X14

BKT6X8 6” 8” BKT7X10 7-5/8” 10-5/8” BKT7X16 7-7/16” 16-1/4” BKT8X8 8” 8” BKT10X12 10-1/8” 12-1/2” BKT12X12WW 11-13/16” 11-13/16” BKT14X14 13-1/2” 13-1/2” BKT14X15 14” 14-5/8” BKT19X20 19-1/2” 19-9/16”

C BKT19X20

USING CORROSION-RESISTANT FASTENERS AND PL PREMIUM ADHESIVE

Always use corrosion-resistant mechanical fasteners (nails or screws) and PL Premium Adhesive when installing Fypon Products. This combination provides a secure, long lasting bond. Countersink all fasteners about 1/8” and fill with exterior grade white spackle. If desired, sand any minor imperfections and topcoat with a quality exterior latex or oil base paint. Fypon exterior millwork installations should be finished using a quality, exterior grade silicone caulk to prevent water infiltration behind siding, windows and doors. Some exterior millwork installations, in particular new construction (before siding is applied) may require a J-channel and/or flashing to prevent water infiltration. Installers must determine which installation technique is best for the specific situation.

IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints. See page 820 to order PL premium Adhesive, ADH1.

EXTERIOR MILLWORK Decorative Millwork/

Exterior Millwork High Density Polyurethane

Corbels/Dentil Blocks

CORBELS C

COR5X10

COR11X20

COR10X14 PART # COR5X10 COR10X14 COR11X20

A 5-1/4” 9/16” 11”

B 10” 14-1/2” 20”

C 4” 3-3/4” 6-1/2”

Shown here: COR5X10(Corbel)

DENTIL BLOCKS A

DTLB6X4X6

DTLB8X6X6

DTLB6X6X8

B DTLB4X4X7 DTLB9X11X16 USING CORROSION-RESISTANT FASTENERS AND PL PREMIUM ADHESIVE

IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints. See page 820 to order PL premium Adhesive, ADH1.

PART # A B DTLB6X4X6 5-1/2” 6-1/8” DTLB6X6X8 8” 5-3/8” DTLB8X6X6 5-1/4” 8-1/8” DTLB9X11X16 16” 9-1/4” DTLB4X4X7 7-1/2” 4-5/16”

C 4-3/4” 5-1/2” 5-1/2” 11-1/4” 5”

T-823

EXTERIOR MILLWORK Exterior Millwork High Density Polyurethane

Window and Door Trim Shown here: AR60X10MC (Arch) SWDH60X30 (Sunburst) K10TM (Keystone) PIL10X96A (Pilaster)

Shown here: WCH64X9 (Crosshead) PIL7X108 (Pilaster)

FEATURES AND BENEFITS

PART # FOR SIZES 24”- 57” DENTIL-MLDG-2457 Decorative 58”- 93” DENTIL-MLDG-5893 Dentil DENTIL-MLDG-94189 94”- 189” Moulding DENTIL-MLDG-190207 190”- 207” 24”- 90” TRIMSTRIP-2490 Decorative 91”- 186” TRIMSTRIP-91186 Trim Strip 187”- 207” TRIMSTRIP-187207 Note - All modified crossheads 24”- 141” Bottom Trim BOTTOMTRIM-24141 are nonreturnable. Adds 1’ to Height BOTTOMTRIM-142207 142”- 207” All crossheads are available routed and with the following factory applied accessories: PART # DESCRIPTION Without Accessories With Accessories ROUTED 5/8” x 5/8” groove • Custom sizes available. • Primed with ultraviolet stable coating. • Unlike wood, Fypon window and door trim products resist insect infestation and will not warp, decay or split. • Easy Installation.

DESCRIPTION

Dentil Trim (D) Trim Strip (T) Bottom Trim (BT)

A Keystone cannot be used when combining a Crosshead with a Pediment.

Adds 1” to height

6” WINDOW CROSSHEADS

9” WINDOW CROSSHEADS

3”

4-1/2”

6”

9”

1”

PART #

WCH24X6 24” 27-1/2” WCH30X6 30” 33-1/2” WCH32X6 32” 35-1/2” WCH33X6 33-5/8” 37-1/8” WCH34X6 34” 37-1/2” WCH36X6 36” 39-1/2” WCH37X6 37-5/8” 41-1/8” WCH38X6 38” 41-1/2” WCH40X6 40” 43-1/2” WCH41X6 41-5/8” 45-1/8” WCH43X6 43” 46-1/2” WCH44X6 44” 47-1/2” WCH48X6 48” 51-1/2” WCH56X6 56” 59-1/2”

WCH60X6 WCH64X6 WCH68X6 WCH72X6 WCH74X6 WCH76X6 WCH80X6 WCH87X6 WCH96X6 WCH100X6 WCH104X6 WCH108X6 WCH110X6

A 60” 64” 68” 72” 74” 76” 80” 87” 96” 100” 104” 108” 110”

B 63-1/2” 67-1/2” 71-1/2” 75-1/2” 77-1/2” 79-1/2” 83-1/2” 90-1/2” 99-1/2” 103-1/2” 107-1/2” 111-1/2” 113-1/2”

KEYSTONES

K6M Keystone For B 6” Crossheads

KP6M Recessed Panel Keystone For 6” Crossheads

Matches all 6” Crossheads PART # A B C D E K6M 5-3/4” 7” 4” 3-7/8” 6” KP6M 5-3/4” 7” 4” 4-1/8” 6” QUANTITY DISCOUNTS AVAILABLE. INQUIRE FOR A QUOTE.

PART #

WCH24X9 24” 29-1/2” WCH32X9 32” 37-1/2” WCH33X9 33-5/8” 39-1/8” WCH34X9 34” 39-1/2” WCH36X9 36” 41-1/2” WCH37X9 37-5/8” 43-1/8” WCH38X9 38” 43-1/2” WCH40X9 40” 45-1/2” WCH41X9 41-5/8” 47-1/8” WCH43X9 43” 48-1/2” WCH44X9 44” 49-1/2” WCH48X9 48” 53-1/2” WCH60X9 60” 65-1/2” WCH64X9 64” 69-1/2” WCH68X9 68” 73-1/2”

F 1-1/2” 1-3/4”

WCH72X9 WCH73X9 WCH74X9 WCH76X9 WCH80X9 WCH84X9 WCH85X9 WCH96X9 WCH99X9 WCH100X9 WCH101X9 WCH103X9 WCH104X9 WCH108X9 WCH110X9 WCH113X9 WCH197X9

K9M Keystone For 9” Crossheads

PART # K9M KP9M

A B

F 1-1/8” 1-5/8”

12” WINDOW CROSSHEAD 4-1/2” 12”

T-824

B 77-1/2” 78-1/2” 79-1/2” 81-1/2” 85-1/2” 89-1/2” 90-1/2” 101-1/2” 104-1/2” 105-1/2” 106-1/2” 108-1/2” 109-1/2” 113-1/2” 115-1/2” 118-1/2” 202-1/2”

KP9M Recessed Panel Keystone For 9” Crossheads

Matches all 9” Crossheads A B C D E 8” 11” 6” 5-3/4” 9” 8” 11” 6” 6-1/4” 6”

A 72” 73” 74” 76” 80” 84” 85” 96” 99” 100” 101” 103” 104” 108” 110” 113” 197”

KEYSTONES

1-3/8”

PART # A WCH96X12 96”

B 101-1/2”

All pediments can be ordered with siding rout for a neat professional finish. Please specify upon ordering. Part# ROUTED. (Rout is a flat 5/8” x 5/8” groove)

EXTERIOR MILLWORK Exterior Millwork High Density Polyurethane

Entrance Trim/Crossheads

6” DOOR CROSSHEAD

9” DOOR CROSSHEAD 3”

6” A PART #

WCH86X6 86” A

WCH54X9 WCH56X9 WCH67X9 WCH81X9 WCH86X9 WCH90X9 WCH93X9

9” A

1”

PART #

4-1/2”

1-3/8”

89-1/2”

KEYSTONES K6M & K9M Keystones B For 6”, 9” & 12” Crossheads

KP6M &KP9M Recessed Panel Keystone For 9” Crossheads

Matches all 6”, 9” & 12” Crossheads PART # A B C D E K6M 5-3/4” 7” 4” 3-7/8” 6” K9M 8” 11” 6” 5-3/4” 9” Matches all 9” Crossheads PART # A B C D E KP6M 5-3/4” 7” 4” 4-1/8” 6” KP9M 8” 11” 6” 6-1/4” 9”

A B

54” 56” 67” 81” 86” 90” 93”

59-1/2” 61-1/2” 72-1/2” 86-1/2” 91-1/2” 95-1/2” 98-1/2”

F 1-1/2” 1-1/8” F 1-3/4” 1-5/8”

Window &Entrance Trim Sunburst Window Pediment Half Round 1-3/4”

C A

W PART # SWDH24X12 SWDH30X15 SWDH32X16 SWDH33X17 SWDH36X18 SWDH37X19 SWDH40X20 SWDH42X21 SWDH44X22 SWDH48X24 SWDH56X28 SWDH60X30 SWDH64X32 SWDH68X34 SWDH72X36 SWDH76X38

PITCH

ACORN COMBINATION PEDIMENT

W 24” 30” 32” 33-5/8” 36” 37-5/8” 40” 42” 44” 48” 56” 60” 64” 68” 72” 76”

H 12” 15” 16” 16-3/4” 18” 18-13/16” 20” 21” 22” 24” 28” 30” 32” 34” 36” 38”

USING CORROSION-RESISTANT FASTENERS AND PL PREMIUM ADHESIVE Always use corrosion-resistant mechanical fasteners (nails or screws) and PL Premium Adhesive when installing Fypon Products. This combination provides a secure, long lasting bond. Countersink all fasteners about 1/8” and fill with exterior grade white spackle. If desired, sand any minor imperfections and topcoat with a quality exterior latex or oil base paint. Fypon exterior millwork installations should be finished using a quality, exterior grade silicone caulk to prevent water infiltration behind siding, windows and doors. Some exterior millwork installations, in particular new construction (before siding is applied) may require a J-channel and/or flashing to prevent water infiltration. Installers must determine which installation technique is best for the specific situation.

PART # CAP50 CAP54 CAP75 CAP80 CAP85

A 50” 54” 75” 80” 85”

B 54-1/2” 58-1/2” 79-1/2” 84-7/16” 89-3/8”

C 17-1/4” 18-3/8” 22-1/16” 20-3/4” 21-13/16”

D 21-1/8” 21-3/8” 25-1/8” 25-3/8” 28”

PROJ 3-1/8” 3-1/8” 3” 3-1/8” 3-1/8”

PITCH 6/12 6/12 6/12 5-1/2/12 5/12

ACORN MATCH A5X10 A5X10 A5X10 A5X12 A5X12

COMBINATION PEAKED CAP PEDIMENT PITCH C

Pitch Information Pitch indicates the incline of a roof as a ratio of the vertical rise to the horizontal run. It is properly expressed as X distance in 12 inches. For example: A roof that rises at a rate of seven inches for each foot of run is designated as having a 7/12 pitch.

IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints. See page 820 to order PL premium Adhesive, ADH-1.

All pediments can be ordered with siding rout for a neat professional finish. Please specify upon ordering. Part# ROUTED. (Rout is a flat 5/8” x 5/8” groove)

PART # A B CPCP54 54” 58-5/16”

C 21”

PROJ 3”

PITCH 6/12

QUANTITY DISCOUNTS AVAILABLE. INQUIRE FOR A QUOTE.

T-825

EXTERIOR MILLWORK Exterior Millwork High Density Polyurethane

Entrance Trim / Pilasters Sold in sets only

PLAIN PILASTERS

ONE PIECE W/ATTACHED PLINTH BLOCK

WITH ADJUSTABLE PLINTHBLOCK

PROJ

W H

PROJ

PART # W H PIL5X90P 5-1/4” 90” PIL7X90P 7” 90” PIL8X90P 8” 90” PIL11X90P 11” 90” PIL11X108P 11” 108”

FLUTED PILASTERS

ONE PIECE W/ATTACHED PLINTH BLOCK

PLINTH PROJ BLOCK HT 1-1/16” 10-1/16” 2-1/2” 13-3/16” 2-1/2” 13-3/16” 3-1/2” 13-3/16” 3-1/2” 14-1/2”

PART # PIL6X120P PIL7X108P PIL7X120P PIL8X108P PIL9X108P

W 6” 7” 7” 8” 9”

H 120” 108” 120” 108” 108”

PLINTH PROJ BLOCK HT 2-1/2” 13-13/16” 2-1/2” 13” 2-1/2” 13” 2-5/8” 13” 3” 14-1/2”

USE FOR WINDOW APPLICATION PLINTH PART # W H PROJ BLOCK HT PIL5X90 5-1/4” 90” 1-5/8” 10-1/8” PIL6X90 6-1/4” 90” 2-1/2” 13-1/8” PIL7X90 7” 90” 2-1/2” 13-3/16” PIL9X90 9” 90” 3” 14-1/2”

DOUBLE PANEL PILASTER

WITH ADJUSTABLE PLINTH BLOCK

ONE PIECE W/ATTACHED PLINTH BLOCK

PROJ

PART # PIL7X90DP PIL9X90DP

W 7” 9”

PLINTH H PROJ BLOCK HT 90” 2-1/2” 13-3/16” 90” 3” 14-1/2”

HALF ROUND COLUMN PILASTER

ONE PIECE W/ATTACHED PLINTH BLOCK

PART # PIL3X108 PIL4X108 PIL5X108 PIL6X108 PIL7X108 PIL7X144 PIL8X90 PIL8X108 PIL9X108 PIL11X108 PIL11X144

W 3-1/2” 4-1/2” 5-1/4” 6-1/4” 7” 7” 8” 8” 9” 11” 11”

H 108” 108” 108” 108” 108” 144” 90” 108” 108” 108” 144”

PLINTH PROJ BLOCK HT 1-5/8” 10” 1-5/8” 10” 1-5/8” 10” 2-1/2” 13-3/16” 2-1/2” 13” 2-1/2” 13” 2-1/2” 13” 2-1/2” 13” 3” 14-1/2” 3-1/2” 14-1/2” 3-1/2” 14-1/2”

FLUTED PILASTER ECONOMY

ONE PIECE W/ATTACHED PLINTH BLOCK

PROJ

Shown here: K9M (Keystone) See pages 824-825 DCH93X9 (Moulding) See page 825 PIL7X108 (Pilaster) See page 826

PART # PIL10X96HC

W 10”

H 96”

PROJ 6”

All pediments can be ordered with siding rout for a neat professional finish. Please specify upon ordering. Part# ROUTED. (Rout is a flat 5/8” x 5/8” groove)

PROJ

PB PLINTH PART # W H PROJ BLOCK HT PIL5X90E 5-1/4” 90” 1-1/4” 14-3/16” PIL7X90E 7” 90” 1-5/16” 14-3/16”

QUANTITY DISCOUNTS AVAILABLE. INQUIRE FOR A QUOTE.

T-826

Exterior Millwork by

Focal Point

T-827

exterior Millwork - Louvers

N EW

Montour PART # width height proj. 22” 22” 2” OCL2222 28” 28” 1-7/8” OCL2828 OCL3030 29-7/8” 29-7/8” 1-7/8”

M e r id ia n PART # width height proj. RL15 15” 15” 2” RL18 18” 18” 2” RL22 22” 22” 2” RL24 24” 24” 2” RL28 27-3/4” 27-3/4” 2” RL30 29-1/2” 29-1/2” 2-1/2” RL32 32” 32” 2” RL36 36” 36” 2” RL48 48” 18” 1-7/8”

O n e id a PART # width height proj. RL20FT 20” 20” 2” RL27FT 27” 27” 2” RL34FT 34” 34” 1-7/8”

B a d en

PART # RL24FTK RL38FTK

T-828

Fro m b ell Key to Key outer ring Diameter Diameter proj. 24-1/8” 20-13/16” 1-13/16” 38” 36” 2-11/16”

PART # RL18TK RL24TK RL28TK RL30TK RL32TK RL36TK RL40TK

Key to Key outer ring Diameter Diameter proj. 17-5/8” 15-5/8” 3” 26-1/2” 24” 3-3/4” 28-5/8” 26” 3” 30” 27-1/8” 3” 31-3/4” 29-3/4” 3-3/4” 36” 33” 3-1/2” 40” 38” 3”

exterior Millwork - Crossheads Hampton

Height: 6” Projection: 2-3/4”

N EW PART # HWH246 HWH256 HWH286 HWH326 HWH336 HWH366 HWH376 HWH406 HWH416 HWH426 HWH446 HWH456 HWH466 HWH516 HWH536 HWH566 HWH606 HWH646 HWH686 HWH726 HWH746 HWH766 HWH786 HWH806 HWH826 HWH886 HWH916 HWH926 HWH1006 HWH1046 HWH1086

Breastboard Width 24-1/4” 25-1/2” 28” 31-3/4” 33-5/8” 36” 37-5/8” 40” 41” 42-1/8” 44” 45” 46-1/8” 50-7/8” 53” 55-3/4” 59-3/8” 64” 68” 72” 74” 76” 78” 80” 82” 88” 91” 92” 99-3/4” 104” 108” Use KY736 keystone

Overall Width 26-3/4” 28” 30-1/2” 34-1/4” 36-1/8” 38-1/2” 40-1/4” 42-1/2” 43-1/2” 44-5/8” 46-1/2” 47-1/2” 48-5/8” 53-3/8” 55-1/2” 58-1/4” 61-3/4” 66-1/2” 70-1/2” 74-1/2” 76-1/2” 78-1/2” 80-1/2” 82-1/2” 84-1/2” 90-1/2” 93-1/2” 95-1/2” 102-1/4” 106-1/2” 110-1/2”

Northmoreland 3 -piece Garage Door Kit

Georgetown 9” Height: 9” Projection: 3”

Height: 9” Projection: 4”

A B PART # width width WHGT289 32” 28” WHGT349 36” 34” WHGT37.639 38-5/8” 41-5/8” WHGT41.639 41-5/8” 45-5/8” WHGT449 44” 48” WHGT459 49” 45” WHGT489 48” 52” WHGT549 58” 54” WHGT729 76” 72” WHGT049 104” 108” WHGT1089 112” 108” WHGT1929 192” 196” Use KY829 or KY830 keystone maximum Breastboard PART # Width NWH609-LR-KIT 120” NWH969-LR-KIT 192” NWH1049-LR-KIT 208”

maximum Overall width 124-1/2” 196-1/2” 212-1/2”

KEYSTONES Top Width: 6-1/6” Bottom Width: 4-1/16” Height: 7-1/4” Top Projection: 4” Bottom Projection: 1-5/8”

KY736

For the Hampton Crosshead

Top Width: 10-3/4” Bottom Width: 7” Height: 8-3/4” Top Projection: 1-1/4” Bottom Projection: 1-1/4”

KY829

For the Georgetown Crosshead

Top Width: 6-3/4” Bottom Width: 4” Height: 10-3/8” Top Projection: 4-7/16” Bottom Projection: 7/8”

KY830 For the Georgetown Crosshead

T-829

MIX AND MATCH DOOR SYSTEMS The front door and entryway are the first areas people see; make these features a plus for your home. First impressions will be lasting with a door surround system by Focal Point. Choose from our licensed historical collections or mix and match elements to design your own entrance. Focal Point products are made of durable polyurethane, which resists mold, mildew and rot. Our door systems add architectural detail and enhance curb appeal.

CROSS HEADS

Siena PART # 97915

height 6”

Proj. 2-7/8”

colonial PART # height Proj. 97920 6” 2-7/8”

length 60”

REPEAT length 1-15/16” 60”

width 6-3/4”

PART # 97690 97590 97480 97580 97900

height 6-3/4”

FRIEZES Siena PART # 15215

97405

height 7-1/2”

Proj. 1-3/4”

CAPITAL

FRIEZE

PILASTER

Design your ideal door or window surround with our customizable components. All products are primed, moisture resistant polyurethane. A variety of rosettes enable you to showcase your style.

CLASSIC KEYSTONE PART # 97925

KEYSTONE

CROSS HEAD

length 92-1/4”

width 11-15/16” 7-11/16” 7-3/4” 6-1/2” 6” (A) 6” (B) 5-1/4”

WORKS WITH 97480 97580 97690 97590 ---

height proj. 25-3/16” 2-3/4” 14” 1-3/16” 86-5/8” 3/4” 78-3/4” 11/16” 90” 1-1/4” 89-3/4”

1-5/16”

PLINTHS majestic

97690

imperial

GEORGIAN PART # height Proj. REPEAT length 15205 7-1/2 1-3/4” 7-1/8” 92-1/4”

97590

CAPITALS Heritage

97470

Venetian Coped/2

PILASTERS

97911 (For Use w/Frieze)

Siena

97905 B

imperial

97570

Venetian

Siena Coped/2

97910

97906 (For Use w/Frieze) PART # 97910 97905 97470 97570 97911 97906

T-830

WORKS WITH 97405, 97900 97405, 97900 97480 97580 97405, 97900 97405, 97900

width 8-3/8” 7-1/2” 12-1/2” 10-1/4” 8-3/8” 7-1/2”

height 7-1/4” 7-1/4” 6-11/16” 3-1/8” 7-1/4” 7-1/4”

proj. 2-1/8” 2-1/8” 3” 2-3/4” 2-1/2” 2-1/2”

Heritage

97480

imperial

97580

fluted

97900

fluted

97405

EXTERIOR PLASTIC MOULDINGS U.V. STABILIZED • WHITE FINISH PVC OR POLYSTYRENE • VARIOUS LENGTHS

• • • • • •

EASY SHIPPING

Termite & Moisture proof (will not promote mildew or mold). No splitting, cracking, splintering or rotting. Ready to install with stainless steel nails, screws and construction adhesive. Installed using traditional tools and fasteners. Finished in white. Can be painted with oil or latex paint. Better insulation characteristics than wood. Energy efficient.

CAN BE CUT FOR

U.S.

WELBUILT Made in the U.S.A.

Crown Mouldings

CROWN MOULDING #1

A CROWN MOULDING

MANUFACTURER PART # MATERIAL AMERICAN PRO PVC PVM-45 U.S. WELBUILT EXTERIOR-45 Polystyrene

DIMENSIONS MINIMUM A B LENGTH ORDER 5-1/4" 11/16" 16 Ft. None 5-1/8" 5/8" 12 Ft. None

LEAD TIME Stock Stock

CROWN MOULDING

CROWN MOULDING #2 MANUFACTURER AMERICAN PRO

PART #

PVM-47

MATERIAL PVC

DIMENSIONS MINIMUM A B LENGTH ORDER 4-5/8" 11/16" 16 Ft. None

CROWN MOULDING #3

B A CROWN MOULDING

MANUFACTURER AMERICAN PRO U.S. WELBUILT

DIMENSIONS MATERIAL A B LENGTH PVC 3-5/8" 9/16" 16 Ft. PVM-49 12 Ft. EXTERIOR-49 Polystyrene 3-1/2" 5/8" PART #

Ram's Solid Crown Moulding

DIMENSIONS MANUFACTURER PART # MATERIAL A B LENGTH U.S. WELBUILT EXTERIOR-284 Polystyrene 2-1/4" 1-1/8" 12 Ft.

A U.S. Welbuilt

MANUFACTURER PART # MATERIAL AMERICAN PRO PVC PVM-75 U.S WELBUILT EXTERIOR-74 Polystyrene

MANUFACTURER PART # MATERIAL AMERICAN PRO PVC PVM-164 U.S. WELBUILT EXTERIOR-164 Polystyrene

XtraBond®9500

The “Original” Hybrid Formula XtraBond®9500 is a high performance, one component, permanently flexible, easy to use, multi-purpose fast cure modified polyurethane sealant. XtraBond®9500 cures rapidly when exposed to atmospheric moisture to form a durable bond. • Use as adhesive or filler. • Eco-friendly, low VOC’s. • Fast cure.

LEAD TIME Stock Stock

MINIMUM ORDER None

LEAD TIME Stock

• Paintable. • Non-yellowing.

DIMENSIONS MINIMUM A B LENGTH ORDER 1-3/4" 9/16" 16 Ft. None 1-3/4" 9/16" 12 Ft. None

Base Cap Moulding

B A

MINIMUM ORDER None None

Bed Moulding

B A

LEAD TIME Stock

DIMENSIONS MINIMUM A B LENGTH ORDER 1-1/8" 11/16" 16 Ft. None 1-1/8" 11/16" 12 Ft. None

LEAD TIME Stock Stock

* US Welbuilt is proudly manufactured from recycled high density polystyrene

PART # XB-9500

T-831

EXTERIOR PLASTIC MOULDINGS EASY SHIPPING

CAN BE CUT FOR

U.V. STABILIZED • WHITE FINISH PVC OR POLYSTYRENE • VARIOUS LENGTHS

U.S.

WELBUILT Made in the U.S.A.

Quarter Round Moulding

B MANUFACTURER AMERICAN PRO U.S. WELBUILT

PART #

PVM-106 EXTERIOR-105

B A

A 3/4" 3/4"

DIMENSIONS B LENGTH 3/4" 16 Ft. 3/4" 12 Ft.

MINIMUM ORDER None None

LEAD TIME Stock Stock

MINIMUM ORDER None None

LEAD TIME Stock Stock

MINIMUM ORDER None None None

LEAD TIME Stock Stock Stock

MINIMUM ORDER None None

LEAD TIME Stock Stock

MINIMUM ORDER None

LEAD TIME Stock

MINIMUM ORDER None

LEAD TIME Stock

MINIMUM ORDER N/A None

LEAD TIME N/A Stock

Scotia Moulding

B MANUFACTURER AMERICAN PRO U.S. WELBUILT

MATERIAL PVC Polystyrene

PART #

MATERIAL PVC Polystyrene

PVM-2021 EXTERIOR-93

A 3/4" 3/4"

DIMENSIONS B LENGTH 3/4" 16 Ft. 3/4" 12 Ft.

Brick Moulding

MANUFACTURER PART # MATERIAL AMERICAN PRO PVC PVM-180C U.S. WELBUILT EXTERIOR-180-8 Polystyrene U.S. WELBUILT EXTERIOR-180-12 Polystyrene

* *

A 2" 2" 2"

DIMENSIONS B LENGTH 1-1/4" 17 Ft. 1-1/4" 8 Ft. 1-1/4" 12 Ft.

Drip Cap Moulding B A

MANUFACTURER AMERICAN PRO U.S. WELBUILT

B A

MANUFACTURER U.S. WELBUILT

PART #

PVM-188 EXTERIOR-188

MANUFACTURER AMERICAN PRO U.S. WELBUILT

DIMENSIONS A B LENGTH 1-5/8" 11/16" 16 Ft. 1-5/8" 11/16" 12 Ft.

Window Casing Moulding PART #

MATERIAL EXTERIOR-299 Polystyrene

DIMENSIONS A B LENGTH 3-5/8" 1-1/8" 8 Ft.

Casing Moulding PART #

EXTERIOR-376

MATERIAL Polystyrene

DIMENSIONS A B LENGTH 2-1/4" 5/8" 8 Ft.

Rake Moulding

B A

MATERIAL PVC Polystyrene

PART #

MATERIAL N/A N/A EXTERIOR-283 Polystyrene

DIMENSIONS A B LENGTH N/A N/A N/A 1-3/4" 1-1/8" 12 Ft.

* US Welbuilt is proudly manufactured from recycled high density polystyrene XtraBond®9500

The “Original” Hybrid Formula

XtraBond®9500 is a high performance, one component, permanently flexible, easy to use, multi-purpose fast cure modified polyurethane sealant. XtraBond®9500 cures rapidly when exposed to atmospheric moisture to form a durable bond. • Use as adhesive or filler. • Eco-friendly, low VOC’s. • Fast cure.

T-832

• Paintable. • Non-yellowing.

PART # XB-9500

EXTERIOR PLASTIC MOULDINGS Additional Exterior Profiles MADE EXCLUSIVELY BY :

NO MINIMUM ORDER - IN STOCK Crown Moulding

Crown Moulding

3/4”

Crown Moulding

3/4”

4-5/8”

3-1/2” EXTERIOR-7020

EXTERIOR-1022

12 Ft. Lengths

Fits 3/4" Board

12 Ft. Lengths

1/2” Base Cap Moulding

EXTERIOR-2010

Raised Panel Cap Moulding

EXTERIOR-5810

12 Ft. Lengths

Crown Moulding

5/8”

WELBUILT

7/8”

2-7/8”

5/8”

U.S.

U.V. STABILIZED • WHITE FINISH POLYSTYRENE • 8 FT or 12 FT. LENGTHS

CAN BE CUT FOR

1/2” Base Cap Moulding

EXTERIOR-1320

EXTERIOR-2820

8 Ft. Lengths

1-1/8” Decorative Base Cap Moulding Egg & Dart Pattern

1-1/4”

8 Ft. Lengths

1-3/8”

Decorative Base Cap Moulding

Chair Rail Moulding 1”

Leaf Pattern

5/8”

3-1/2” 7/8”

1-9/16” EXTERIOR-0940 12 Ft. Lengths

Half Round Moulding

EXTERIOR-9133

Half Round Moulding

12 Ft. Lengths

Astragal Moulding

EXTERIOR-120 12 Ft. Lengths

Angle Moulding 1-1/2”

7/8” 3/8” EXTERIOR-136 8 Ft. Lengths

EXTERIOR-7033

EXTERIOR-8920

8 Ft. Lengths

1” 1/2”

EXTERIOR-122

1-3/8”

8 Ft. Lengths

3/4” 3/8”

2”

1-1/2” EXTERIOR-5022 12 Ft. Lengths

* US Welbuilt is proudly manufactured from recycled high density polystyrene XtraBond®9500 N EW !

The “Original” Hybrid Formula

PART # XB-9500

T-833