Extruded Profiles by Jaski Sasan

EXTRUDED PROFILE & SHAPES Pgs. 28–73 Baseboard Mouldings (Vinyl)

U-Channel Mouldings Panel Clips (Aluminum)

Dust Seal/ Weatherseal (with Adhesive)

Tee Mouldings (Flexible)

Sliding Door Track (Aluminum)

Tapes (Pre-Glued Iron On)

Trims (Plastic)

Cap and Divider Moulding Sets Bumper Mouldings (Flat Face)

ANGLE MOULDINGS Aluminum Even Angle.............................................64-65 Aluminum Uneven Angle.............................................. 65 Plastic Clear Right Angle.............................................. 62 Plastic Color Angle w/Adhesive.................................... 62 Plastic Color Right Angle.............................................. 63 Plastic Color Uneven Angle.......................................... 63 Plastic Flexible Uneven Angle...................................... 63 Plastic Metallic Angle w/Adhesive................................ 62 BASEBOARD MOULDINGS (Vinyl)........................... 73 BUMPER MOULDINGS Bumper Guard Staple................................................... 72 Flat Face...................................................................... 33 Flexible Flat w/Adhesive............................................... 72 Glossy Specialty Angle................................................. 35 Glossy.......................................................................... 35 Industrial Bumper Guard, Peel & Stick......................... 72 Polyurethane................................................................ 33 Standard....................................................................... 34 Waterfall....................................................................... 33 CAP & CORNER DIVIDER MOULDINGS Stainless Steel.............................................................. 57 CAP & DIVIDER MOULDINGS (Sets)......................... 54 CAP MOULDINGS Aluminum..................................................................... 56 Clear Plastic................................................................. 55 Color Plastic................................................................. 53 Metallic Plastic.............................................................. 53 Stainless Steel.............................................................. 57 CARPET/FLOOR MOULDINGS.................................. 73 CHAIR EDGE GUARD................................................. 72 CORNER CHANNEL MOULDINGS Aluminum..................................................................... 58 Outside (Aluminum)...................................................... 58 Plastic (90° & 60°)........................................................ 59 COVE MOULDINGS Aluminum..................................................................... 62 Stainless Steel.............................................................. 62 CUSTOM EXTRUSIONS Aluminum................................................................28-29 Plastic......................................................................28-29

U-Channel Mouldings (Flexible)

DIVIDER MOULDINGS Aluminum..................................................................... 57 Cap & Corner (Stainless Steel).................................... 57 Clear Plastic................................................................. 55 Color Plastic................................................................. 54 DUST SEAL/WEATHERSEAL w/ADH........ 67, 287, 355 EDGEBANDING PVC, Polyester & Real Wood....................................... 40 Metal Like..................................................................... 40 Rehau (Assorted)....................................................42-43 EDGEBANDING TOOLS Clipper.......................................................................... 39 Edge Trimmer............................................................... 39 End Trimmer................................................................. 39 Hand Held Edgebanding Applicator............................. 38 Manual Edge Bander.................................................... 39 Multipurpose Cutter...................................................... 39 FILLERS Aluminum..................................................................... 36 HINGES (Plastic) Flat............................................................................... 70 Panel............................................................................ 70 Tee................................................................................ 70 JOINER MOULDINGS (Clear Plastic)........................ 55 MOULDING ACCESSORIES Double Black Spline..................................................... 35 OVERLAP FACE NOSINGS (Aluminum)................... 60 PANEL CLIPS (Aluminum)......................................... 61 PANEL/GLASS RETAINERS....................................... 71 SHAPES (Clear Acrylic)-Assorted............................. 69 SHOWCASE MOULDINGS (Aluminum).................... 60 SLIDING DOOR TRACK Aluminum............................................................. 67, 355 Plastic................................................................... 66, 356 Plastic Miracle I & II.............................................. 66, 356 TABLE EDGE GUARD BEADING............................... 72 TAPES (Pre-Glued Iron On)....................................... 41 TEE MOULDINGS 2-Tone Designer........................................................... 36 Double Spline............................................................... 35 Flexible Metallic............................................................ 32

SEE PAGES 1007-1023 FOR A - Z INDEX

Extrusions

TEE MOULDINGS Flexible Poly Embossed Leatherette............................ 31 Flexible Polyethylene (Colors).................................30-31 Flexible Polyethylene (Woodgrains)........................30-31 Lazy Susan (Flexible White)............................................. Lipped........................................................................... 35 No Notch Aluminum...................................................... 37 Real Aluminum............................................................. 37 Straight Edge Metallic.................................................. 36 TOOLS Arbors & Bearings........................................................ 38 Edge Trimmer (Tee Moulding)...................................... 39 Flush Trimmer (Tee Moulding)...................................... 38 Hand Held Air Hammer................................................ 38 Notchers....................................................................... 38 Quick Drive Nailer........................................................ 38 Replacement Parts....................................................... 38 Tee Moulding Blades.................................................... 38 TRIMS Aluminum Rounded....................................................................... 60 Rounded Edge............................................................. 60 Plastic Flat............................................................................... 44 Half Round................................................................... 44 TUBES, RODS, BARS & SQUARES Aluminum..................................................................... 68 Clear Acrylic................................................................. 69 U-CHANNEL MOULDINGS Aluminum................................................................50-51 Clear............................................................................. 45 Colors......................................................................46-47 Flexible......................................................................... 48 Mirror (Stainless Steel)................................................. 52 No Bow Shelf (Aluminum)............................................ 51 Nyla-Glide™ .................................................................. 49 Plastic Metallic.............................................................. 52 Polyethylene................................................................. 49 WOOD VENEER SHEETS 10 Mil Paper Backing................................................... 41 Wood Over Wood......................................................... 41 Z-Clip............................................................................ 61

Extrusions At A Glance

We stock a wide variety of plastic, aluminum, stainless steel and solid brass extrusions Products Plastic Extrusions:

We work with the most advanced color labs and production facilities in the world and can duplicate or create plastic extrusions in almost any shape, color, tint, tone, transparency or translucency. For custom plastic extrusions, minimum production runs and color matching fees will apply. We also offer plastic extrusions in a broad range of available plastics that are not listed. Please contact us for further information.

Material

ABS (Acrylonitrile Budadiene Styrene) Acrylic

Rigid, clear material with high clarity. Good weather resistance. Can be modified for extra strength.

Butyrate (Cellulose Acetate Butyrate)

Semi-rigid, clear material with excellent clarity and high gloss. Good for color matching. Can be modified for good weatherability.

Flexible PVC (Polyvinyl Chloride)

Flexible material. Good abrasion resistance. Self healing with good weatherability. Good for color matching. Available in finishes from matte to high gloss.

Low Density Polyethylene (LLDPE, LDPE)

Flexible material. Tough. Good for low temperature performance. Good for color matching. Semi-gloss finish.

PETG (Polyethylene Terephthalate Glycol) Styrene (HIPS)

Rigid, clear material with high clarity. Good impact strength. Rigid, clear material. Cost effective. Good for color matching. Can be foamed.

Rigid PVC (Polyvinyl Chloride)

Rigid material. Available in clear or colors. High impact strength. Good abrasion and chemical resistance. Self extinguishing.

Polypropylene TPE (Thermo Plastic Elastomers) Polycarbonate Polyurethane Nylon

Properties

Rigid material. Good scuff resistance. Good for low temperature performance. Good for color matching. Good chemical resistance.

Semi-rigid material. High strength. Good for low temperature performance. Good for color matching. Available in FDA approved grades. Great for use in hinges. Very flexible material. Available only in colors. Good performance in a wide range of temperatures.

Rigid, clear material with very high clarity. Lightweight with excellent strength. Good for color matching. Flexible to semi-rigid material. Available in clear and colors. Good abrasion and chemical resistance. Can be foamed.

Styrolux (Styrene Butadiene Block Copolymers)

Rigid material. Excellent wear and abrasion resistance. Good performance in a wide range of temperatures. Semi-rigid, clear material with excellent clarity and high gloss. Cost effective. Good impact resistance.

Aluminum Extrusions: We offer aluminum extrusions in a wide variety of stocked and custom anodized and powder coated finishes in almost any color along with wood grain, marble and faux finishes. Material

Aluminum

Stainless Steel

Properties

6063 T5 provides good extrudability with a high quality finish and offers some corrosion resistant properties. 430 grade is magnetic. Added chromium provides corrosion resistant properties.

In House Engineering & Custom Tool Design With our in house tooling capabilities and exceptional network of affiliated production partners, we have the largest library of profile tooling available in the industry, enabling us to provide you with profile extrusions without the high cost and delay of having to fabricate new tooling. Our in house engineers and affiliated production partners can assist you with the design and production of cost effective custom profile extrusions up to 12â&#x20AC;? in width or larger, manufactured to the most exacting tolerances in your choice of materials. Please contact us for further information.

Color/Finish Matching

Depending on the properties of the material chosen, we can custom color match all of the plastic and aluminum extrusions that we offer by your simply sending us a sample color swatch, chip or item to be matched.

Cutting We offer a variety of cutting options for our plastic and semi-rigid and rigid aluminum extrusions.

Standard Cut:

Standard Cuts are utilized to reduce freight costs by cutting extrusions to specific sized lengths that can be shipped via UPS or FedEx. • Low tolerance Standard Cuts are cut to specified sized lengths of 6’x6’, 8’x4’ or 4’x4’x4’ with a (+/- 1”) tolerance for UPS or FedEx Ground shipments • No more than 2 cuts per length • Costs vary by quantity and material • Restocking fees apply to all returned items with the exception of errors on our part

Non-Standard Cut:

Non-Standard Cuts are required when cutting extrusions to specific sized lengths that do not conform to the cut sizes listed in Standard Cuts (For example, a 12’ length may be cut to 79” if desired with the customer receiving the balance of the cut length).

• Low tolerance Non-Standard Cuts are cut to specific sized lengths with a (+/- 1”) tolerance • No more than 1 cut per length • Cuts must be made in full inch increments • Costs vary by quantity and material • Cut lengths may or may not meet UPS or FedEx shipping requirements • No returns allowed with the exception of errors on our part

High Tolerance Secondary Cut

High Tolerance Secondary Cuts are suited for immediate jobsite use when cutting extrusions to specific sized lengths & tighter tolerances. (For example, a 12’ length may be cut to 17-1/4”, 69-5/16” & 56-1/8” as required).

• High Tolerance Secondary Cuts are cut to specific sized lengths with a specified (+/- 1/32” to 1/8”) tolerance • Cuts can be made in any quantity per length to different specified sizes • Costs and tolerances will vary by product, material and quantity of cuts • No returns allowed with the exception of errors on our part

In Line Cut

In Line Cuts are utilized for extrusions that are custom extruded with the highest tolerances to your specified lengths, and are most cost effective for those requiring minimum production quantities of 5000’ or more. • Providing that the minimum production quantity is met, In Line Cut extrusions can be extruded to any length with a plus side tolerance at no additional cost • Costs and tolerances will vary by profile and material, and will need to be quoted on a per order basis • No returns allowed with the exception of errors on our part

Secondary Application of Tape

Whereby many stocked plastic extrusions are available with rubber based, foam or adhesive tape, if required, we can apply adhesive tape either supplied by the customer or us to small quantities of selected extrusions not manufactured with adhesive tape. • Costs will vary by product, material and quantity, and will need to be quoted on a per order basis • No returns allowed with the exception of errors on our part

Bagging, Pack Out & Kitting

We can bag, pack out and kit specific items to your requirements in poly bags or boxes together with your extrusion order (Which may include your literature, instructions or other customer provided or purchased products). Costs will vary and will need to be quoted on a per order basis.

Drop Shipping We can drop ship on your behalf to single or multiple locations either with or without our name or address (Blind Shipping) to meet your requirements. Quoted on a per order basis.

FLEXIBLE POLYETHYLENE TEE MOULDING Lengths: 250 Ft. Coils Sample Chains Available - Please Inquire Use S1 or S7 Slotter unless otherwise noted *770 Almond *742 Angola Brown *288 Beige *175 Putty Gray *324 Red *363 Silver *212 Folkstone u *253 Gold s *579 Tan

Stock Colors Available

*260 Black *131 Blue *386 Bronze s *113 Green *243 Storm Gray u *315 Brown *248 Chamois Yellow u *125 Dove Gray *709 Tan *614 Toy Blue u *601 White *895 Yellow

PHTHALATES FREE *632 *236

Opti Grayu Fresca Green u

u Available in 5/8”, 3/4” & 13/16” widths only s 5000 ft. minimum apply

Fits 9/32”

Woodgrains Available

*817P American Nat. Maple *866P Natural Oak *809P Boston Cherry *747P Teak *423 Oak

Uses S065 Slotter

Cherry is available in 3/4”, 13/16” & 1-1/4” only

NOTE: We can supply other colors - Minimums apply - please inquire

Fits 3/8”

Fits 1/2”

Uses S065 Slotter PART #

Fits 9/16”

Uses S065 Slotter PART #

105-318-* COLOR s

PART #

105-656-260 BLACK 105-656-315 BROWN 105-656-601 WHITE

PART #

BK & WH 105-667-* COLOR W/G

Fits 5/8”

105-668-*

COLOR W/G

Fits 11/16”

Fits 3/4”

Uses S065 Slotter PART #

PART #

BK & WH 105-662-* COLOR W/G

PART #

105-2532-*

COLOR s 105-2732-* W/G

105-670-*

BK & WH 105-658-* COLOR u W/G

PART #

105-650-*

Fits 13/16” Offset

PART #

105-659-* COLOR s

Fits 7/8”

COLOR W/G

SEE PAGE 38 FOR TEE MOULDING TOOLS & BLADES

BK & WH COLOR W/G

Fits 13/16”

PART #

COLOR s W/G

Fits 27/32”

PART #

BK & WH 105-677-* COLOR W/G

Fits 25/32”

Uses S065 Slotter

Fits 1”

PART #

105-651-*

COLOR W/G

FLEXIBLE POLYETHYLENE TEE MOULDING Lengths: 250 Ft. Coils Sample Chains Available - Please Inquire Use S1 or S7 Slotter unless otherwise noted Fits 1-1/8”

PART #

105-563-*

Fits 1-1/8” Offset

PART #

105-564-*

COLOR W/G

Offset w/Bead

PART #

COLOR

105-544-*

COLOR W/G

Fits 1-1/4”

PART #

Fits 1-1/2”

PART #

105-1316-* COLOR s

PART #

BK & WH 105-543-* COLOR W/G

Fits 1-1/2”

105-672-*

COLOR W/G

Fits 1-9/16”

Offset

PART #

Fits 1-1/4”

(#747P Teak is non stock - 5000 foot minimum)

Fits 1-3/16”

105-673-*

PHTHALATES FREE

Fits 1-9/16”

Offset

PART #

105-1916-260 BLACK 105-1916-315 BROWN 105-1916-601 WHITE

COLOR W/G

Fits 1-5/8”

105-1917-260 BLACK 105-1917-315 BROWN 105-1917-601 WHITE

Fits 1-5/8” Offset

Fits 2” Uses S2 or S8 Slotter

PART #

105-1058-260 BLACK 105-1058-315 BROWN 105-1058-601 WHITE

PART #

105-1059-260 BLACK 105-1059-315 BROWN 105-1059-601 WHITE

105-2000-260 BLACK 105-2000-601 WHITE

FLEXIBLE EMBOSSED LEATHERETTE POLYETHYLENE TEE MOULDING Lengths: 250 Ft. Coils • Use S1 or S7 Slotter Colors Available

3/4”

NOTE:

243 Storm Gray 260 Black unless otherwise noted We can supply other colors, minimums may apply. Please inquire

13/16”

7/8”

1-1/4”

Use S065 Slotter PART #

108-679-260 108-679-243

PART #

108-658-260 108-658-243

PART #

108-650-260

PART #

108-543-260

SEE PAGE 38 FOR TEE MOULDING TOOLS & BLADES

FLEXIBLE METALLIC TEE MOULDING Streamlining Wrap Around Metallic Shell Lengths: 250 Ft. Coils Material: PVC Core • Use S1 or S7 Slotter Finishes Available

*POL/B - Polished Brass *BRU/B - Brushed Brass

*POL/C - Polished Chrome *BRU/C - Brushed Chrome unless otherwise noted

*S/S - Stainless Steel

This flexible TEE MOULDING is manufactured from a soft, pliable vinyl which conforms to the contours of any product design with the highly flexible, bright finish surface and underside, it easily turns tight inside and outside corner radius. 1/2”

5/8”

PART #

11/16”

PART #

2487-POL/* 2487-BRU/*

3/4”

PART #

2488-POL/* 2488-BRU/*

PART #

2489-POL/* 2489-BRU/*

13/16”

1”

2490-POL/* 2490-BRU/* 2490-S/S

1-1/4”

1-1/2”

100 Ft. Coils

PART #

2491-POL/* 2491-BRU/* 2491-S/S

100 Ft. Coils

PART #

2492-POL/* 2492-BRU/* 2492-S/S

PART #

2493-POL/* 2493-BRU/* 2493-S/S

2494-POL/* 2494-BRU/*

Material: PVC/Film Finishes Available

*POL/B - Polished Brass

S065 Slotter 500 Ft. Coils - Semi-Rigid

*POL/C - Polished Chrome

1/4”

S4 or S10 Slotter 12 Ft. Lengths

PART #

7/16”

PART #

5187-*

2311-*

CARBIDE TIPPED TEE MOULDING BLADES

NO. OF SLOT PART# WINGS THICKNESS

S055 S065 S1 S2 S3 S4 S5 S6

2 2 2 2 2 2 2 2

.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"

A1/B1

NO. OF SLOT PART# WINGS THICKNESS

S7 S8 S9 S10 S11 S12 S13

4 4 4 4 4 4 4

Complete Set

Arbor

4 Wing Blade

2 Wing Blade

.075" .080" 3/32" 1/8" 3/16" 1/4" .065"

2 Wing w/Arbor & Bearing

A1 Arbor w/Locknut & B1 Bearing w/Washer

5/16" Bore 1/4” Shank 1/2” Cut

NO. OF SLOT PART# WINGS THICKNESS

SJ-055 SJ-065 SJ-1 SJ-2 SJ-3 SJ-4 SJ-5 SJ-6

2 2 2 2 2 2 2 2

.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"

4 Wing w/Arbor & Bearing

NO. OF SLOT PART# WINGS THICKNESS

SJ-7 SJ-8 SJ-9 SJ-10 SJ-11 SJ-12 SJ-13

4 4 4 4 4 4 4

.075" .080" 3/32" 1/8" 3/16" 1/4" .065"

FLAT FACE BUMPER MOULDING

Lengths: 250 Ft. Coils Material: PVC *WH - White INSTALLED .810 .835

Colors Available

*BK - Black *DG - Dove Gray *BR - Brown Custom Colors Available - Please Inquire

13/16”

.450 REF.

INSTALLED 1.130 1.160

*AL - Almond

1-1/8”

.600 REF.

.520 REF.

.122 .132

.140 .150

.165 .185

S3 or S9 Slotter

S4 or S10 Slotter

304-812-BK 304-812-*

304-1125-BK 304-1125-*

304-1250-BK 304-1250-*

PART #

1-1/4”

INSTALLED 1.260 1.300

PART #

BLACK WATERFALL BUMPER MOULDING Material: Matte PVC • Use S4 or S10 Slotter 6 Millimeter • Color Thru and Thru

Contoured Edge

Unique design allows you to trim from the bottom while keeping the contoured edge on top 3/4”

13/16”

7/8”

250 Ft. Coils

110-075-BK

110-812-BK

110-875-BK

PART #

1”

PART #

1-1/8”

100 Ft. Coils

110-100-BK

110-112-BK

110-118-BK

PART #

BLACK POLY BUMPER MOULDING

PHTHALATES FREE

Lengths: 100 Ft. Coils • Material: Polyethylene • Use S3 or S9 Slotter 3/4”

13/16”

3/4”

1-3/16”

1”

13/16”

15/32” 5/16” 1/8”

PART #

307-750-BK

1/2”

5/16” 9/64”

PART #

307-812-BK

17/64”

27/64” 1/8”

PART #

307-1000-BK

STANDARD BUMPER MOULDING

Lengths: 250 Ft. Coils - UPS Shippable/Self Healing Material: PVC Colors Available

*WH - White *BK - Black *BR - Brown *DG - Dove Gray *AL - Almond *RD - Red *SIL - Silver *SG - Slate Gray unless otherwise noted

1/2”

.490 .510

.105 .115

INSTALLED

.375 REF. .135 .145

.125 .135

.105 .115

S1 or S7 Slotter

S2 or S8 Slotter

303-576-BK 303-576-*

303-575-BK 303-575-*

303-625-BK 303-625-*

303-687-BK 303-687-*

PART #

Brown available - 5000 ft. minimum

3/4”

INSTALLED .740 .760

.450 REF.

INSTALLED .805 .825

PART #

13/16”

INSTALLED .880 .900

.113 .127

PART #

7/8”

1”

INSTALLED .990 1.015

.600 REF.

.550 REF.

.475 REF.

11/16”

.685 .700

.350 REF.

.265

5/8”

INSTALLED .625 .640

.515

.453

.124 .140

.150 .165

.160 .175

S2 or S8 Slotter

S3 or S9 Slotter

S4 or S10 Slotter

PART #

303-812-BK 303-812-* 303-812-SIL

PART #

303-1000-BK 303-1000-* 303-1000-SIL Slate Grey available - 5000 ft. minimum

PART #

303-750-BK 303-750-* INSTALLED 1.240 1.270

1-1/4”

INSTALLED 1.235 1.265

.160 .170

S4 or S10 Slotter PART #

303-1250-BK 303-1250-*

1-1/4”

1.500 1.530

.170 .190

WOOD GRAIN

S4 or S10 Slotter-100 Ft. Coils 303-1250-OK

1-1/2”

.734

.437

PART #

303-875-BK 303-875-*

.660 REF.

.500 REF.

1/2”

.490 .510

1.740 1.760

1-3/4”

.734

.437 .187

.177 .197

S4 or S10 Slotter-100 Ft. Coils

303-1500-BK 303-1500-*

303-1750-BK 303-1750-*

PART #

GLOSSY BUMPER MOULDING Lengths: 50 Ft. Coils Material: PVC • Use S4 or S10 Slotter • High Profile Design • Minimum 5” Radius Colors Available

*BK - Black

*DG - Dove Gray

1-3/16”

*AL - Almond

*YW - Yellow

*RD - Red

Fits 11/16” & 3/4” 5/8”

3/16”

PART #

PROPOR3019DRT

Material: PVC/Dual Durometer • Use S4 or S10 Slotter • Black High Profile Design • Can Make 4”-5” Radius GLOSSY TOP 13/16” 1-1/4” .030

GLOSSY TOP COLORS

13/16” 5/8”

COLORS

1.220

1/16” 5/8”

.140

9/32”

1.133

.425

1/8”

.170

250 Ft. Coil S3/S9 Slotter

PART #

302-812-BK/BK

50 Ft. Coil S4/S10 Slotter

PART #

302-1250-BK/BK

Lengths: 50 Ft. Coils Material: PVC • Use S4 or S10 Slotter *BK - Black

*WH - White

1.230 1.270

Colors Available

*DG - Dove Gray

*BR - Brown

*AL - Almond

1-1/4”

*RD - Red

1.440 1.480

1-1/2”

.460 REF.

.525 REF.

.090 .350 REF.

.090

.395 .425

.160 .180

.170 .185

PART #

303-1032-BK 303-1032-*

303-1038-BK 303-1038-*

LIPPED TEE MOULDING

GLOSSY SPECIALTY ANGLE BUMPER MOULDING

Lengths: 250 Ft. Coils Material: Polyethylene

Lengths: 125 Ft. Coils Material: Vinyl PVC • Use S4 or S10 Slotter

Colors Available

260 - Black

Colors Available

*BK - Black

1.250

*WH - White

.250 .625

13/16”

*BR - Brown

S1 or S7 Slotter PART #

Lengths: 6 Ft. Material: Styrene Use S4 or S10 Slotter

1.500

Use when attaching mouldings to routed surfaces

R106-684-BK

521-875-260 521-875-601

FLEXIBLE WHITE LAZY SUSAN MOULDING

PART #

.135

7/8”

S2 or S8 Slotter PART #

521-812-260 521-812-601

DOUBLE BLACK SPINE

.107

601 - White

For 7/8” Board

.140 PART # 310-1000-*

3⁄4”

*BL - Blue

.125 .500

Lengths: 100 Ft. Rolls Material: PVC Use S3 or S9 Slotter PART #

308-1254-WH

STRAIGHT EDGE METALLIC TEE MOULDING Lengths: 12 Ft. Material: ABS/Mylar - Rigid/Protective Cover • Use S1 or S7 Slotter Absolutely Wave and Distortion Free • Available From Stock Finishes Available

*POL/B - Polished Brass *POL/C - Polished Chrome

1/4”

PART #

5/16”

S055 Slotter

PART #

1978-*

1/2”

3/4”

PART #

2198-*

PART #

2025-*

1928-*

2-TONE DESIGNER TEE MOULDING Lengths: 250 Ft. Coils • Use S2 or S8 Slotter unless otherwise noted

5/8”

Nominal 11/16”

3/4”

PVC Film Brite Chrome W/Black Shoulders

PVC Film Brass Edges W/Black Center

PVC Films Brass Edges W/Black Center

PART #

9677S-B/C

2308-BK

1”

Offset For 5/8” Board

2340-BK

1-1/4”

Offset

1.25

3/4”

PVC/Film Brite Brass W/Black Shoulders=(B/B) Brite Chrome W/Black Shoulders=(B/C) PART #

96782S-B/B 96782S-B/C

1-1/2”

Offset

1.25

1.625

1.56

3.43

1.25

PVC/Film Black W/Polished Chrome Use S3 or S9 Slotter

PVC Silver The Look Of Satin Aluminum

90212-BK/POLC

2350-SIL

PART #

1-5/8”

PART #

12 Ft. Lengths - High Gloss PVC Glossy Black

150 Ft. Coils - PVC Silver The Look Of Satin Aluminum

2376-BK

2355-SIL

PART #

ALUMINUM FILLERS Lengths: 12 Ft.

Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines

1/2”

PART #

ALU411-*

*P - Polished - Shiny/Mirror Finish

3/4”

PART #

ALU0365-P

*S - Satin/Clear Anodized - Dull, Matte Finish

1”

PART #

ALU0395-P

“NO NOTCH” ALUMINUM TEE MOULDING Lengths: 12 Ft. • Rippled Face • 4” Maximum Radius Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines

New technology allows you to shape and form a variety of designs

1-1/4” Center Barb

S065 or S13 Slotter

PART #

A305-RF40N-*

*S - Satin/Clear Anodized - Dull, Matte Finish

Standard Aluminum Tee Will Not Form A Bend Unless Notched.

The New “No Notch” Aluminum Makes Forming Easy!

1-1/2”

Off-set Barb

S055 Slotter PART #

A305-RF48-*

REAL ALUMINUM TEE MOULDING Lengths: 12 Ft.

13/16”

Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *P - Polished - Shiny/Mirror Finish *S - Satin/Clear Anodized - Dull, Matte Finish

S065 or S13 Slotter 0.500 0.100

1/2”

S055 Slotter

ALU369T-S

S065 or S13 Slotter

PART #

0.750

ALU1027-*

PART #

ALU1028-*

0.100

13/16” 0.813 0.100

1”

S065 or S13 Slotter

1.000

PART #

ALU1029P-*

0.100

S065 or S13 Slotter PART #

ALU1957-*

1-1/4”

1-1/4” S055 Slotter

S065 or S13 Slotter PART #

PART #

ALU568P-*

ALU968POS-*

1-1/4”

13/16” Rippled Face S055 Slotter

Rippled Face S065 or S13 Slotter

PART #

ALU1029-*

ALU968N-*

1-1/4” Rippled Face S055 Slotter PART #

ALU9680-*

3/4”

1-1/2” Rippled Face S065 or S13 Slotter PART #

ALU7777-*

PNEUMATIC TOOLS HAND HELD AIR HAMMERS

• OVER 1000 BLOWS PER MINUTE. • NO SWINGING. • Can be used anywhere the smallest hand can reach. Replaces wide variety of cumbersome hammers and mallets. No skilled personnel. • CONTROL. A single hammer blow or excess of 1000 blows per minute. Adjustable from slightest hammer tap to heavy impact blows. REPLACEMENT PARTS • VERSATILE. Easily interchangeable hammer tips of super soft hard plastic, PART # DESCRIPTION steel and aluminum. T-15SS Hammer Tip • PALM SIZE-LIGHTWEIGHT-SAFE. T-15S Hammer Tip T-15M Hammer Tip LEATHER TOOL GLOVE DANAIR HAND HELD HAMMER T-15H Hammer Tip FOR AH15 OR AH15 (Supplied w/standard blue tip) AH25 HAMMER T-15AL Hammer Tip T-15ST Hammer Tip IMPORTED HAND HELD HAMMER AS-706 159 Stem AH25 (Supplied w/standard blue tip) HAMMER TIP 4-212 "O" Ring T-15SS (Super Soft Plastic) Red 163 Bumper T-15S (Soft Plastic) Blue 3-127 "O" Ring T-15M (Medium Plastic) Black QUICK DRIVE NAILER T-15H (Hard Plastic) Yellow 158 Valve AUTOMATICALLY HAMMERS COMMON NAILS INTO T-15AL (Aluminum) 3-114 "O" Ring WORK PLACE. IDEAL FOR TIGHT CORNERS. T-15ST (Steel) 4-218 "O" Ring • Operating pressure - 80-125 PSI. 157 Cap AS-OK-15 REPAIR KIT • Air consumption - 2-4 CFM. INCLUDES: 2-031 "O" Ring RN16-30M • Drives 3d through 12" spikes with proper 1 - ALL-O-RINGS 161 Exhaust Seat (With Magnetic Tip) 1 - AS-ORL-O-RINGS LUBE guide selection. 162 Plug 1 - 163 BUMPER • Maximum nail head diameter - 27/64" 156 Housing • Penny size: 8-20 • Triggerless/safe. • Weight: 2.5 lbs.

AS-319 STROKE CONTROL SPACER

NOTCHING TOOLS The most important "quarter inch" in mitering is that small portion of the barb which is removed by the notching tool. This special "V" cut enables the moulding to negotiate small radii and sharp corners for a clean, smooth installation. PART#

P900R 1870A P900A 1840A P900V 848A

DESCRIPTION

Vinyl Tee Moulding Notcher - cuts 1/4" radius Replacement Blade Aluminum & Vinyl Notcher with 1/16" opening Replacement Blade (A-Notch) Channel and Angle Notcher with 3/32" opening Replacement Blade

PUNCH THICKNESS

101-TRIMMER

0.090" -

2 2 2 2 2 2 2 2

.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"

SJ-055 SJ-065 SJ-1 SJ-2 SJ-3 SJ-4 SJ-5 SJ-6

2 2 2 2 2 2 2 2

.055" .065" .075" .080" 3/32" 1/8" 3/16" 1/4"

4 Wing Blade

4 Wing w/Arbor & Bearing

With additional jaws 45° or 30° for plastic lippings

NO. OF SLOT PART# WINGS THICKNESS

FLUSH TRIMMER

This all metal hand tool features a precise high carbon steel cutting blade that trims excess material from the edge of the T-molding face, creating a smooth flush table or counter surface. The unique circular blade can be rotated to expose a new sharp cutting surface. This feature eliminates the need for frequent sharpening. Heavy cast aluminum housing with ball bearing roller guides facilitates easy operation.

S055 S065 S1 S2 S3 S4 S5 S6

NO. OF SLOT PART# WINGS THICKNESS

With fence for veneer edge & PVC lippings

101XTRA-BLADE (X-Blade)

992006-000-0000

Complete Set

2 Wing w/Arbor & Bearing

NO. OF SLOT PART# WINGS THICKNESS

0.050"

THE-QUALITY HSS BLADE (3mm thick, 18% tungsten) has two cutting edges and, therefore, operates both forwards and backwards and effortlessly cuts off all projecting lippings neatly and completely flush-when the additional jaws are used with a chamfer of 300 or 450. The chamfer is adjustable according to the spacing between the additional jaws. Supplied with a built-in blade and additional jaws 450 mounted, a pair of additional jaws 300 and on fence for plane parallel cutting--the latter for PVC and veneer edges.

CARBINE TIPPED TEE MOULDING BLADES 2 Wing Blade

0.156"

TEE MOULDING TOOLS EDGE TRIMMER 101

(available as optional accessory)

SHORTENS STROKE BY 1/4" REDUCES HAMMERING FORCE

992007-000-0000 (X-Blade)

S7 S8 S9 S10 S11 S12 S13

4 4 4 4 4 4 4

.075" .080" 3/32" 1/8" 3/16" 1/4" .065"

SJ-7 SJ-8 SJ-9 SJ-10 SJ-11 SJ-12 SJ-13

4 4 4 4 4 4 4

Arbor A1/B1...Complete Set A1 Arbor w/Locknut & B1 Bearing w/Washer • 5/16" Bore • 1/4” Shank •1/2” Cut

.075" .080" 3/32" 1/8" 3/16" 1/4" .065"

EDGEBANDING TOOLS HAND HELD EDGEBANDING APPLICATOR

The H40 Edgemate Applicator is hand held and perfect for smaller jobs. It has an adjustable thermostat - from 250o - 450o. Heating element is also available.

H40

1 MANUAL EDGE BANDER

3 EDGE TRIMMER

For banding pre-glued edges on PVC, polyester, melamine and veneer. It can band both straight and shaped work pieces. Through special design of an adjustable clamp high precision work and reliability are ensured. Guillotine knife for end trimming and roll-holder included as standard equipment. EBS-980.

2 END TRIMMER

SPECIFICATIONS:

• Double Insulation • Max. Banding Width - 50mm • Temperature - 300°C (570°F) to 525°C (1000°F) • Air Delivery - 400/min. • Input Power - 115/230 V, 50-60 Hz. • Weight - 2,7 Kgs

Special Savings Buy All 3 Tools For One Price Part # EBS-SET

Manual Edgebander, End Trimmer & Edge Trimmer

MULTIPURPOSE CUTTER CT-2000

EBS-930

EBS-930-RB

(Replacement Blade)

EBS-210

Manual end trimmer. It allows a perfect, clean and high quality cut on all the corners of the board. No other finishing operations are needed. Equipped with double sided blades.

EBS-980-XBLADE

(Replacement Blade)

Double edge trimmer. Cuts both sides simultaneously, finishing operations. For edges up to 40mm. For larger edges it can be used as two independent edge trimmers. Top quality long life blades which are easy to replace once worn.

EBS-210-RB

(Replacement Blade)

Indispensable Tools For A Perfect Edgebanding & Finishing Of Pre-glued Edges.

CL46 CLIPPER

WITH 5 INTERCHANGEABLE ANVILS IN A CONVENIENT STORAGE CASE

MITER ANVIL

For mitering at multiple angles.

SINGLE RADIUS ANVIL

For 90° angles.

For 1” dia. material.

FLAT ANVIL

For straight and flat cuts.

REPLACEMENT PARTS AVAILABLE:

BLADE

CT-BLD • Heavy duty forged steel blade for extra tough materials. • Ergonomic handle for comfortable use. • Lightweight diecast aluminum anvils. DOUBLE RADIUS ANVIL

CT-DRA

RIGHT ANGLE ANVIL

CT-RAA

MITER ANVIL

CT-MA

DOUBLE RADIUS ANVIL For 5/8” and 3/4” dia. material.

SINGLE RADIUS ANVIL

CT-SRA

FLAT ANVIL

CT-FA

DELIVERS QUICK CLEAN CUTS Plastic Tubing - Rubber - Weather Stripping Rope - Twine - Leather - Plants/Shrubs - Crafts - Wood Trim - Carpeting - Linoleum - Auto Trim - Auto Belts & Hoses Nylon and much more! • Replacement stainless steel blades (previously carbon) • New convenient blade storage in the handle blade tray slips into handle for storage of extra blades. • Now available in 2 sizes: 2-1/2" & 3-7/8". • New replacement kit contains 3 stainless steel blades and 1 anvil: complete with storage tray.

CL46-25...2-1/2" Clipper CL46...3-7/8" Clipper Replacement Kits: CL46-25RK CL46RK

PEEL & STICK EDGEBANDING PRODUCT FEATURES:

• Just peel and stick it • Bond increases in strength with time • 50’, 250’, & 600 foot rolls • 3/4” & 15/16 widths, .020 thickness • Custom colors available for 1 roll minimum z Metallic Finishes are 500 Ft. Rolls

PVC (Solids, Woodgrains and Metallics) (*PO) Pickled Oak

*WH White

*AW Antique White

(*SD) Rosewood Oak

*AL Almond

(*MD) Medium Oak

*BK Black

*AM American Maple *NC Natural Cherry

*PW Presidential Walnut

(*LO) Light Oak

*IW Imperial Walnut

PART # DESCRIPTION FESP-34-* 3/4” PVC Solid Fast Edge 3/4” PVC Wood Grain Fast Edge FEWP-34-* FESW-34-* 3/4” PVC Unfinished Wood Fast Edge FEPW-34-* 3/4” Finished Wood Fast Edge 3/4” Metallic PVC Fast Edge FEME-34-* 15/16” PVC Solid Fast Edge FESP-1516-* FEWP-1516-* 15/16” PVC Wood Grain Fast Edge FESW-1516-* 15/16” Unfinished Wood Fast Edge FEPW-1516-* 15/16” Finished Wood Fast Edge FEME-1516-* z 15/16” Metallic PVC Fast Edge

*PBR Polished Brass

*BCHR Brushed Chrome *PCHR Polished Chrome *SC Select Cherry

*DG Fog Gray

(*HM) Hardrock Maple

*MW Mahogany on Walnut

*MC Medium Cherry

*LG Folkstone Gray *NO Natural Oak

(*MM) Manitoba Maple (*WM White Washed Maple

*KP Knotty Pine *BE Beech

*BC Bourbon Cherry *GC Golden Cherry

*RN Renaissance Oak

(*CM) Clear Maple

*BR Brushed Brass

*HT Heritage Cherry

*GO Golden Oak

(*LM) Light Maple

*MDF Finished MDF

*DC Dark Cherry

Red Mahogany *RM

*AC Autumn Cherry *FC Fuji Cherry

*DM Dark Red Mahogany

Unfinished (Real Wood) *RO Red Oak

(*MP)

*WO White Oak

(*CH)

Maple

Cherry

Pre-finished (Real Wood) *FRO Red Oak

*FWO White Oak

*WA Walnut

*FMP Maple

*FCH Cherry

*FB Birch

*FWA Walnut

For more Unfinished and Pre-finished colors, please inquire

POLYESTER / REAL WOOD VENEER EDGEBANDING PEEL & STICK POLYESTER EDGE BANDING IN COLOR

PEEL & STICK REAL WOOD VENEER EDGE BANDING

Lengths: 250 Ft. Coils

Stocked Colors Available

*WH - White *BK - Black *AL - Almond

PART # PE-500* PE-625* PE-750* PE-812* PE-1000* PE-1500*

WIDTH 1/2” 5/8” 3/4” 13/16” 1” 1-1/2”

*RO - Red Oak *WO - White Oak *WB - White Birch

PART # WIDTH • Butt Joint VE-500* 1/2” • Pre-Sanded VE-625* 5/8” • Stainable VE-750* 3/4” VE-812* 13/16” VE-1000* 1” VE-1500* 1-1/2” Other Species Available Please inquire 5000 ft. min

• Works With Most Foam Board Edges

METAL LIKE TRIMS Peel & Stick Finishes Available

*POL/B - Polished Brass *POL/C - Polished Chrome *BRU/B - Brushed Brass *BRU/C - Brushed Chrome *BK - z Black

DESIGNED FOR ALL TRIM APPLICATIONS • MATERIAL: Deposits of metallized plastic with a durable lacquered finish, laminated to a THERMOPLASTIC BACKER • PROTECTIVE COVER • Can be sawed, cut or routed without delamination • CLEAN, FINISHED EDGES WITHOUT FILING • Scratch resistant Matching 4’ x 8’ sheets are available Please inquire. Additional Colors/Finishes & Widths are available - please call with your inquiry

250 FT. COIL NTP TRIM (With Adhesive) .024 Thickness

PART # SIZE 1/4” NTP-25-* NTP-50-* 1/2” NTP-75-* 3/4” NTP-875-* 7/8” NTP1516-* 15/16” NTP-1-* 1” NTP-1-25-* 1-1/4” NTP-1-50-* 1-1/2” NTP-2-* 2” NTP-3-* 3” NTP-6-* 6” NTP-24-* 24”- 50 FT. COIL

500 FT. COIL NTP TRIM (Primed/No Adhesive) .020 Thickness

PART # SIZE ET-50-* 1/2” ET-75-* 3/4” ET-875-* 7/8” ET-1-* 1” ET-1-25-* 1-1/4” ET-1-50-* 1-1/2” ET-2-* 2” ET-3-* 3” ET-6-* 6” ET-24-* 24” - 50 FT. COIL

z NOTE: ET TRIMS ARE PRIMED FOR USE WITH AUTOMATIC EDGEBANDING EXCEPT GLOSS BLACK

Highe st Quality Metall ic Trim

PROTECTIVE COVER WITH OR WITHOUT SELF-ADHESIVE BACKING

PRE-GLUED IRON ON TAPES Colors Available

Read Wood Veneer Available

*WH - Frost White *BK - Black *AL - Almond

PART # IOC625-* IOC687-* IOC750-* IOC812-* IOC875-* IOC100-* IOC1125-* IOC1250-* IOC150-*

*RD - Red Oak *WO - White Oak *WB - White Birch *CH - Cherry

PART # IOV625-* IOV687-* IOV750-* IOV812-* IOV875-* IOV100-* IOV1125-* IOV1250-* IOV150-*

SIZE 5/8” 11/16” 3/4” 13/16” 7/8” 1” 1-1/8” 1-1/4” 1-1/2”

STANDARD WOOD VENEER EDGING 7/8” Fleece Backed Tape • 500 Ft. Coils PART #

WOOD SPECIES

CT875CH Cherry CT875HM Honduras Mahogany CT875MP Maple CT875RO Red Oak CT875WAL Walnut CT875WA White Ash CT875WB White Birch CT875WO White Oak

13/16” Pre Glued Tape • 250 Ft. Rolls

• Non Adhesive Fleece Tape or Pre-Glued Iron On Tape • Finger Jointed, Continuous Rolls • Fine Sanded • Stainable

PART #

WOOD SPECIES

CT812CH Cherry CT812HM Honduras Mahogany CT812MP Maple CT812RO Red Oak CT812WAL Walnut CT812WA White Ash CT812WB White Birch CT812WO White Oak

NOTE: OTHER SIZES AND WOOD SPECIES ARE AVAILABLE. PLEASE INQUIRE FOR DETAILS ON YOUR REQUIREMENTS.

WOOD VENEER SHEETS 10 MIL PAPER BACKING

• 1/42” Thick Genuine Wood Veneer • Book Matched • Sanded & Tenderized • Veneer Is Permanently Bonded Under Heat And Pressure To The Paper Backing. 2 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive PART # CV28CH CV28MP CV28RO CV28WB NOTE: OTHER WOOD SPECIES AND CUTS ARE AVAILABLE - PLEASE INQUIRE.

These Products Are Book Matched

4 Ft. x 8 Ft. Sheets • No Adhesive

WOOD TYPE SPECIES OF CUT Cherry Flat Maple Flat Red Oak Flat White Birch Rotary

WOOD TYPE PART # SPECIES OF CUT CV48CH Cherry Flat CV48RO Red Oak Flat CV48WAL Walnut Flat CV48WB White Birch Rotary

OPTIONAL GLUE SHEET AVAILABLE: 2 Ft. High Roll x Any Amount Of Running Feet

PART # GLUE-SHT

WOOD OVER WOOD • 2 Ft. Or 4 Ft. X 8 Ft. Sheets • .035 Thickness • No Bubbling • No Ridging • No Phenolic Or Foil Backer Lines • Flexibility • 100% Surface Sanded • With Or Without Adhesive

2 Ft. x 8 Ft. Sheets • No Adhesive PART #

z (Must order 2’ x 8’ sheet in multiples of 2)

Wood over wood laminate is composed of two wood veneer faces permanently bonded with the grain of the face running perpendicular to the grain of the back. The result is a dimensionally stable product which minimizes the wood veneer’s tendency to expand and contract across the grain. NOTE: OTHER WOOD SPECIES AND CUTS ARE AVAILABLE PLEASE INQUIRE.

WOW28HM z

WOOD SPECIES

Honduras Mahogony

TYPE OF CUT

Flat

2 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive PART #

WOW28A-CH

WOOD SPECIES

Cherry

TYPE OF CUT

Flat

4 Ft. x 8 Ft. Sheets • No Adhesive PART #

WOW48MP

WOOD SPECIES

Maple

TYPE OF CUT

Flat

4 Ft. x 8 Ft. Sheets • with Peel & Stick Adhesive PART #

WOW48A-CH

WOOD SPECIES

Cherry

TYPE OF CUT

Flat

OTHER SIZES AND BACKERS ARE AVAILABLE. SOME MINIMUMS DO APPLY. PLEASE INQUIRE.

REHAU EDGEBANDING INTRODUCING A COMPLETE LINE OF REHAU EDGEBANDING We Can Match Virtually Any Laminate Color! FOR AUTOMATIC EDGEBANDERS

Thin Edgeband

AVAILABLE WIDTH SIZES: 5/8”, 3/4”, 7/8”, 15/16” & 1-5/16” THICKNESS: .018 & .020 - 600 FT. COILS

This PVC edgebanding is ideal for thinner panels in a variety of sizes and colors. PART#

PVC58-BLK PVC58-ALM PVC75-FK PVC75-WHT PVC75-HRM PVC875-BLK PVC875-ALM PVC875-HRM PVC1516-BLK PVC1516-AS PVC1516-FM PVC1312-BLK PVC1312-FOG PVC1312-AFRW

SIZE

5/8” 5/8” 3/4” 3/4” 3/4” 7/8” 7/8” 7/8” 15/16” 15/16” 15/16” 1-5/16” 1-5/16” 1-5/16”

COLOR or WOODGRAIN THICKNESS

Black Almond Folkstone White Hard Rock Maple Black Almond Hard Rock Maple Black Afternoon Showers Fusion Maple Black Fog African Walnut

0.018” 0.018” 0.018” 0.018” 0.018” 0.018” 0.018” 0.018” 0.018” 0.018” 0.018” 0.02” 0.02” 0.02”

COIL SIZE

600 600 600 600 600 600 600 600 600 600 600 600 600 600

Spectraedge®

AVAILABLE WIDTH SIZES: 15/16” & 1-5/16” THICKNESS: 1MM - 600 FT. COILS (Only Available 15/16” Width), 2MM & 3MM-300 FT. COILS Comprised of durable impact resistant and rigid PVC. This edging is ideal for high traffic areas and has superior machinability for easier processing. PART#

SIZE

PVC1M-ALM 15/16” PVC1M-BLK 15/16” PVC2M-ALM 15/16” PVC2M-BLK 15/16” PVC13123M-ALM 1-5/16” PVC13123M-BLK 1-5/16” PVC13123M-FM 1-5/16”

COLOR or WOODGRAIN THICKNESS

Almond Black Almond Black Almond Black Fusion Maple

1mm 1mm 2mm 2mm 3mm 3mm 3mm

COIL SIZE

600 600 300 300 300 300 300

Flexedge®

AVAILABLE WIDTH SIZES: 15/16” & 1-5/16” THICKNESS: 3MM - 300 FT. COILS This is a durable impact resistant semi-rigid PVC edge band, handles a radius as small as 12MM without extra pressure or excess adhesive. The flexible 3MM material trims easily and is ideal for use with contour edgebanders. PART#

PVC3MF-ALM PVC3MF-BLK PVC13123MF-ALM PVC13123MF-BLK PVC13123MF-CS

SIZE

15/16” 15/16” 1-5/16” 1-5/16” 1-5/16”

COLOR or WOODGRAIN THICKNESS

Almond Black Almond Black Congo Spruce

3mm 3mm 3mm 3mm 3mm

COIL SIZE

300 300 300 300 300

REHAU EDGEBANDING INTRODUCING A COMPLETE LINE OF REHAU EDGEBANDING We Can Match Virtually Any Laminate Color! FOR AUTOMATIC EDGEBANDERS

Eco Style™ ABS Edgeband

AVAILABLE WIDTH SIZES: 15/16” & 1-5/16” THICKNESS: .018, .020 - 600 FT. COILS, 3MM - 300 FT. COILS ABS is chlorine - free both in its manufacture and in the final product. Unlike PVC, ABS may be incinerated with general waste. Additionally, this thermoplastic material is impact and temperature resistant, lighter in weight and highly heat resistant. Material is produced in our North American facility according to ISO 14001 environmental standards. PART#

ABS1516-FOG ABS1516-BLK ABS1516-GW ABS1312-WHT ABS1312-BLK ABS3MM-WHT ABS3MM-BLK ABS13123-FK ABS13123-BLK

SIZE

15/16” 15/16” 15/16” 1-5/16” 1-5/16” 15/16” 15/16” 1-5/16” 1-5/16”

COLOR or WOODGRAIN THICKNESS

Fog Black Gunstock Walnut White Black White Black Folkstone Black

0.018” 0.018” 0.018” 0.02” 0.02” 3mm 3mm 3mm 3mm

COIL SIZE

600 600 600 600 600 300 300 300 300

Visions™ Glass Like

AVAILABLE WIDTH SIZES: 23MM & 45MM THICKNESS: 2MM - 328 FT. COILS Glass is synonymous with clarity, light and openness, with visions™ edgeband achieves the unique appearance of real glass using lightweight, robust polymer. We create the illusion of depth by applying a decorative print to the underside of transparent Poly (Methyl Methacrylate PMMA) material. When this material is radiused or beveled, it diffuses light in the same way as real glass. By combining vision edgeband with matching boards or laminates, you can achieve the appearance of a real sheet of glass. PART#

VEB232M-IB VEB452-IB

SIZE

23mm 45mm

COLOR

Ice Blue Ice Blue

THICKNESS

2mm 2mm

COIL SIZE

328 328

Magic™ Metallic

AVAILABLE WIDTH SIZES: 22MM, 28MM & 43MM THICKNESS: 1.5MM - 492 FT. COILS

Using various combination of genuine aluminum edgeband and polymers, Magic™ Metallic edgeband achieves the look and feel of metal banding without its processing drawbacks. The magic collection, offered in aluminum and stainless steel finishes, includes metallic surface, translucent and magic creativo™, a twin level solid or printed surface with metallic overlay. PART#

MM2215 MM2815 MM4315

SIZE

22mm 28mm 43mm

COLOR

Magic Metallic Aluminum Finish Magic Metallic Aluminum Finish Magic Metallic Aluminum Finish

THICKNESS COIL SIZE

1.5mm 1.5mm 1.5mm

492 492 492

DECORATIVE TRIMS Half Round Trim

Material: PVC/Film - w/Foam Tape

Cut Program Available

Finishes Available

SEE PAGE 29 FOR DETAILS

*POL/B - Polished Brass *POL/C - Polished Chrome unless otherwise noted

1/4”

.240 .260

PVC/Film 100 FT. Coils - Flexible

Vinyl -100 Ft. Coils Only Available In Black (*BK), Brite Brass (*B/B) & Brite Chrome (*B/C)

2301-*

CFWW250-*

Tape

PART #

3/8” Light

.330 .350

.075 .095

PART #

3/4”

Protective Film .740 .710

.175

Tape

5/8”

.610 .625

1/8”

Tape

.100 .120

1/4”

.250 .280

.110 .090

7/16” Light

.390 .420

Tape

PVC/Film 12 Ft. & 100 FT. Coils - Flexible

PVC/Film - 100 & 500 Ft. Coils Only Available in Brite Brass (*B/B) & Brite Chrome (*B/C)

PVC/Film - 250 Ft. Coils

PVC/Film -12 Ft. Lengths Polished Brass Only

2004-*

5185-*

2782-*

2018-POL/B

PART #

Tape

PART #

Flat Trim

Material: ABS/Film - w/Foam Tape Finishes Available

*POL/B - Polished Brass *POL/C - Polished Chrome unless otherwise noted

1/4”

.235 .265 .040 Tape

Mylar Laminate with Protective Film .360 .390 .045 .055

3/8”

250 Ft. Coils

100 & 500 Ft. Coils

100 Ft. Coils

2525-*

5082-*

1857-*

PART #

5/8”

.730 .770

.080 .090

.020 .025

Tape

3/4”

Tape

1”

.980 1.020 .020 .025

PART #

.020 .025

Tape

1-1/4”

1.230 1.270 Tape

100 Ft. Coils

2179-*

2426-*

2427-*

2428-*

PART #

1-1/2”

Tape

PART #

3/4”

2”

3/4”

1.980 2.020

1.480 1.520 .020 .025

100 Ft. Coils

.740 .760

Tape

.090 .100

100 Ft. Coils

PART #

2429-*

2430-*

Multi Purpose Cutter Available

CT-2000

PART #

12 Ft. Lengths PART #

.020 .025

.025 .035

Tape

.615 .635

1/2”

.490 .510

.625 .640 .240 .260

Tape

TAPE

.765 .795

100 & 500 Ft. Coils - Brass Edges

All Polished Brass - All Polished Chrome PVC/film

12 Ft. Lengths

PART #

6107-*

2190-*

.040 .050

CLEAR U-CHANNEL MOULDING Lengths: 12 Ft. Material: PVC

Cut Program Available SEE PAGE 29 FOR DETAILS

unless otherwise noted

Fits 1/16”

Fits 1/8”

Fits 1/16”

Fits 3/16”

1/32” Gap adjustable

5/64” 1/2”

1/16” Ref.

9/16”

11/32”

Material: Butyrate

1/2”

Material: Butyrate

Material: Styrolux

8 & 10 Ft. Lengths

3/32”

3/16”

5/32” PART #

PART #

2128-CL

PART #

708-CL

Fits 1/4”

PART #

130-CL

142F-CL

Fits 1/4”

Fits 11/64”

Fits 1/4” .060 wall thickness

9/64”

13/64”

13/64” 1/2”

9/32”

3/64”

Material: Butyrate

19/64”

3/4”

Material: Butyrate 8 Ft. Lengths

1/4” 17/64”

1/4”

11/64”

PART #

141-CL

PART #

1059-CL

Fits 1/4” 8 & 10 Ft. Lengths

Fits 3/8”

Material: Butyrate

PART #

Fits 1/2”

PART #

Fits 5/8”

1/4”

PART #

121-CL

5/8” PART #

585-CL

385-CL

Fits 3/4”

Fits 1”

11/16” 5/16”

3/64”

PART #

383-CL

17/32”

1/2”

3/8” 3/64” Wall

3/8”

2014-CL

27/64”

3/8”

1/4”

3/64”

1/4”

131-CL

Fits 3/8” 5/16”

21/64” 17/32”

5/16”

3/64”

P2743

Fits 1/4” 3/16”

1/2”

PART #

1830-CL

29/32” 1/2”

3/8” 1/16”

3/4” PART #

341-CL

1/16”

1” PART #

100-CL

COLOR U-CHANNEL MOULDING Lengths: 12 Ft. Material: Styrene Colors Available

*WH - White

*BK - Black *BE - Beige unless otherwise noted

*SIL - Silver

Fits Up To 1/8”

Fits 1/8”

Fits 3/16”

3/32” 3/4”

1/2”

8 & 10 Ft. Lengths

3/16”

5/32” 7/32”

1/32” 1/8”

3/16”

3/16” PART #

PART #

132-*

PART #

130-*

Fits 1/8” .100 .150

PART #

R104-581-*

Fits 5/32”

.145 .165

R104-582-*

Fits 7/32”

Fits 3/16” 5/64”

3/16” 8 Ft. Lengths Material: PVC

7/16” 1/2”

.500 .530

w/Adhesive PART #

Fits Up To 1/4”

1/2”

3/8”

PART #

5/16”

27/64”

21/64” 3/32”

3/8”

1/4” 3/64”

1/2”

3/8” PART #

R104-4016-*

Fits 1/2”

19/64” 9/16”

R104-589-*

3/64”

PART #

131-*

Fits 3/8”

11/16”

5/16”

PART #

R104-588-*

Fits 3/8”

383-*

8 & 10 Ft. Lengths

3/64”

PART #

141-* 141-SIL

PART #

Fits 5/16” 9/32”

1/4”

142F-*

5/32”

1/4”

3/64”

PART #

R104-744-*

Fits 1/4”

13/64” Silver Material: PVC

3/16”

PART #

2326-*

9/32”

3/64” 7/32”

PART #

Material: Styrolux

1/2”

5/16”

FILM

Fits 1/4”

3/64”

Material: High Gloss ABS/Film

.485 .515

.210 .230

106-4808-*

1/32”

PART #

121-* 121-SIL

Silver Material: PVC

PROTOTYPE SAMPLES We Are Happy To Provide Samples For Prototypes & Design Builds Please Inquire.

COLOR U-CHANNEL MOULDING Lengths: 12 Ft. Material: Styrene Colors Available

*WH - White

*BK - Black *BE - Beige unless otherwise noted

Fits 1/2”

*SIL - Silver

Fits 1/2”

Fits 9/16”

Fits 5/8”

7/16” 3/8”

8 Ft. Lengths Material: PVC

.575

3/64”

1/2”

1/2” 1/2”

.375

.040 Wall Thickness

1/2”

PART #

212-*

5/8” PART #

PLEC-*

Fits 5/8”

585-*

Fits 3/4”

5/8”

1/2” 5/8”

1/2” 3/64”

PART #

R104-683-*

31/64”

3/8”

5/8”

1/16”

3/4”

3/8”

5/64” 1/16”

3/64”

5/8”

5/8” PART #

PART #

R104-554-*

Fits 1”

1”

1/16”

PART #

100-*

R104-5145-*

Fits 1-1/2”

1-9/64”

1-25/64” 1/2”

1/2”

11/16” 1-1/16”

341-* 341-SIL

Fits 1-1/4”

1-3/64” 1/2”

3/4” PART #

R104-569-BK

Fits 1-1/16”

29/32”

1/16”

3/4”

PART #

158-*

Silver Material: PVC

11/16”

1/16”

1-1/4”

PART #

114-*

1/16”

1-1/2”

PART #

112-*

Fits 2” 2” 1/4”

3/32” 1/16” PART #

PROTOTYPE SAMPLES We Are Happy To Provide Samples For Prototypes & Design Builds Please Inquire.

110-*

FLEXIBLE U-CHANNEL Lengths: 250 Ft. Coils • Material: Dense Neoprene • Rubber Black unless otherwise noted

Fits Up To 1/16” w/Glue Bead

Material: PVC

1⁄32”

9⁄32”

Fits 1/32” 5/32”

Avaiable in Black (*BK) & White (*WH)

5⁄16”

Fits 1/16” 7/32” 1/16”

1/32” 1/4”

PART #

5/16”

PART #

1964-*

PART #

113-1001

Fits 1/8”

9/32”

113-1002

Fits 3/16”

5/16”

Fits 1/4” 1/4”

3/16”

1/8” 3/8”

1/2”

15/32”

PART #

113-1003

PART #

113-1004

113-1005

Fits 1/32” 1/4”

Fits 1/16” 3/8”

1/32” 3/8”

1/8”

1/16” 1/2”

PART #

5/8”

PART #

113-2000

1/4”

113-2020

Fits 5/8”

1/2”

Material: PVC

1/4” PVC

100 Ft. Coils

5/8”

3/4”

PART #

808-500-BK

Material:

.080

1/4” PVC

100 Ft. Coils

PART #

Fits 3/4”

Material:

.080

PART #

808-625-BK

Material: PVC w/Segmented Metal Core Colors Available

WH - White

BK - Black

Fits 1/2”

Fits 3/16”-1/4”

Fits 1/8”

.660

.520 .390

.723

.500 1/16”

.640

1/4”

100 Ft. Coils

125 Ft. Coils

PART #

809-317-BK 809-317-WH

1/2”

150 Ft. Coils PART #

809-343-BK 809-343-WH

809-349-BK 809-349-WH

Lengths: 100 Ft. Coils • Material: Pvc With Segmented Metal Core • Black Fits 5/8”

Fits 3/4” .875

.938 5/8”

.845

PART #

809-837-BK

.970

3/4”

PART #

809-838-BK

50 Ft. Coils

PART #

113-2010

Fits 1/2” .065

Fits 1/8” 15/32”

50 Ft. Coils

NYLA-GLIDE™ U-CHANNEL Material: MDS Modified Nylon • Lengths: 100 Ft. Coils • Color: Dark Gray unless otherwise noted

By adding Molybdenum Disulphide to Nylon 6, our profiles feature advanced mechanical and thermal properties over plain nylon including: • SUPERIOR HEAT RESISTANCE...resist distortion to 300° with a maximum continuous use temperature of 250° • SUPERIOR WEAR RESISTANCE AND SURFACE LUBRICITY...in many cases outwears metal and are not vulnerable to fretting & galvanic corrosion • SUPERIOR DIMENSIONAL STABILITY, STRENGTH AND RIGIDITY...maintain better fit while having greater tensile and compression strength in use

Fits 1/16”-1/8”

Fits up to 1/16” .300 .345

.055 ±.005

.031 MAX. GAP Nylon snap-on protection for conveyor rails

PART #

.156 .055 ±.005 .230

.050 MAX. GAP

Nylon snap-on protection for conveyor rails

PART #

NG-0125

Fits 1/8”

.500 ±.040

.055 ±.005

.031 MAX Nylon snap-on protection for rails

NG-0062

Fits 1/16”-3/32”

.500 ±.031

.062 ±.015

Fits 1/8”-1/4”

.250 ±.010

.125 REF

.245 .220

NG-0250

Fits 1/8”-3/16”

Fits 1/4”-5/16”

.156 R. .635 .095

.105 .250

12 Ft. Lengths

Nylon sheet metal protector

Nylon for use on for conveyor bed rails

Nylon snap-on wear strip for conveyor systems

PART #

NG-0093

NG-0120

NG-0187

Cut Program Available

NG-0312

Square Back Fits 1/16” 0.067”± .010 0.225” ± .020

Fits 1/8” 0.265”± .010

0.129”± .010 0.250” ± .020

0.050” ± .005 0.056”

PART #

Fits 1/4”

0.062” ± .005 0.104”

PART #

NG-0062SB

0.075” ± .005

0.295” ± .020

NG-0125SB

0.231” PART #

NG-0250SB

POLYETHYLENE U-CHANNEL Lengths: 100 Ft. Coils • Color: Black .125”

.062”

Fits 1/8”

.500”

.055”

.031” MAX

PART #

Fits 1/8”

PART #

Fits 1/4”

.500”

.050” MAX

PE-0125L

Low Cost - Flexible

.250”

PE-0125SB

PE-0125

PART #

Fits 1/4”

PE-0250SB

PE-0250

Fits 3/8”

PART #

PE-0375SB

ALUMINUM CHANNEL MOULDING *M

*ORB

Lengths: 12 Ft. Material: Aluminum Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *S - Satin/Clear Anodized - Dull, Matte Finish *BK - Black Powder Coated Finish *ORB - Oil Rubbed Bronze Finish

*WH (Glossy)

*BS

*P - Polished - Shiny/Mirror Finish *BS - Brushed Satin - Lightly Brushed (Shows Grain) Satin Finish *WH - Glossy White Powder Coated Finish Other Colors Available, Please Inquire. Samples Are Available

Fits 1/8”

Fits 1/4”

0.282

0.062

0.250

0.125 0.047

0.297

0.063

0.375

0.219

0.9.38

0.375

PART #

0.406 PART #

PART #

ALU757-*

ALU257-*

ALU1257-*

Fits 5/16”

0.312

Fits 3/8” 0.376

0.094

0.375

Fits 9/32”

0.062

0.313 0.500 PART #

0.500

ALU57-*

PART #

ALU148-*

Fits 7/16”

0.439

0.062

0.062 0.562

0.563

0.624

0.563

PART #

ALU847-*

PART #

ALU547-*

Fits 5/8” 0.626 0.375

0.626

PART #

0.500 0.865 PART #

ALU447-*

0.062

0.750 PART #

ALU347-*

0.775

Fits 5/8”

0.750

0.062

0.750

Fits 1/2”

0.500

ALU570-*

Fits 3/4” 0.045

0.750 0.625 0.874 PART #

ALU560-*

Fits 3/4” 0.062

ALUMINUM CHANNEL MOULDING *M

Lengths: 12 Ft. Material: Aluminum

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *S - Satin/Clear Anodized - Dull, Matte Finish *BK - Black Powder Coated Finish Other Colors Available, Please Inquire. Samples Are Available

Fits 3/4”

0.751

Finishes Available

*P - Polished - Shiny/Mirror Finish *BS - Brushed Satin - Lightly Brushed (Shows Grain) Satin Finish *WH - Glossy White Powder Coated Finish

0.125

0.500

0.750

Fits 3/4”

0.875

0.062

*WH (Glossy)

*BS

1.000

0.875 PART #

1.000

PART #

ALU947-*

PART #

ALU247-*

ALU1041-S 0.875

Fits13/16”

Fits 3/4” 0.758

Fits 3/4”

.125

Fits 7/8”

0.814 0.062

0.312

2.000

0.062

0.313

0.882

0.938

PART #

1.125

ALU2161-S

PART #

ALU157C-*

ALU565-*

Fits 7/8”

1.000 0.062

.876

0.812

0.062

0.313

Fits 1”

1.000

1.124

PART #

ALU357-*

ALU448-*

Fits 1”

1.376

Fits 1-3/8”

1.872

0.062

1.001 0.313

0.064

0.750

0.062 1.125

0.750 1.500

PART #

2.000

PART #

ALU557-*

Fits 1-7/8”

PART #

ALU578-*

ALU575-*

ALUMINUM “NO BOW” SHELF CHANNEL Lengths: 12 Ft. - For 1/2”, 5/8” & 3/4” Shelves

*S - Clear Anodized - Dull, Matte Finish • *BK - Black - Powder Coated Finish • *WH - White - White Coated Finish 3/4” C

PART #

3/4” B 1/8” 13/16” A

Fits Shelf Size

SHF-A500-* SHF-A625-* SHF-A750-*

45/64” 3/4” 27/32” 3/4” 15/16” 3/4”

1/2” 5/8” 3/4”

PLASTIC METALLIC CHANNEL MOULDING Lengths: 12 Ft. Material: ABS/Mylar Finishes Available

Cut Program Available

*POL/B - Polished Brass *POL/C - Polished Chrome *BRU/B - Brushed Brass *BRU/C - Brushed Chrome *B/B (1964 only) - Brite Brass *B/C - Brite Chrome unless otherwise noted

SEE PAGE 29 FOR DETAILS

.025 .075

*BK - Black *WH - White

.300 .330

w/Glue Bead

.105 .125

Fits up to 1/16”

.280 .305

200 Ft. Coils Material: PVC/Film

.260 .280

.135 .155

PART #

1964-* (Color) 1964-* (Metallic)

Fits 3/16”

.170 .190

.170 .180

PART #

.245 .275

1991-*

Fits 3/4” .725 .695

.245 .275

.245 .215

.630 .650

PART #

2317-*

PART #

Fits 5/8” .590 .610

.505 .525

.480 .500

.240 .260

2325-*

Fits 1/2”

.385 .405

.285 .315

PART #

1982-*

.455 .475

Fits 1/4”

.195 .205

.205 .220

PART #

Fits 3/8”

1999-*

.190 .120

.210 .230

.210 .230 PART # 1962-*

PART #

Fits 3/16”

.175 .185

.220 .240

.732 .765

.320 .340

Fits 3/16”

Fits 1/8”

.765 .735

PART #

2412-*

PART #

2413-*

2414-*

STAINLESS STEEL MIRROR MOULDING Lengths: 12 Ft. • All Stainless Steel 430 Grade (Magnetic) • Polished-Shiny/Mirror Finish 1/4”

1/4”

1/4” 1/4”

3/8” 5/16”

.015 Thick

PART # SS900SP-P

.015 Thick

PART # SS900-P

PART # SS914-P

9/32”

1/4” 3/8”

7/16” 9/32”

13/32” .020 Thick

.020 Thick PART # SS900T-P

.023 Thick PART # SS911-P

.015 Thick

PART # SS907-P

FOR MORE CAP & DIVIDER MOULDINGS, SEE PAGES 53-57

(For 1/4” Material) Inside Corner 7/8”

3/4”

13/32”

.023 Thick PART # SS908-P

PART # SS853-P

(For 1/4” Material) Outside Corner PART # SS852-P

COLOR PLASTIC CAPPING Lengths: 8 Ft. Material: Styrene Cut Program Available SEE PAGE 29 FOR DETAILS

Colors Available

1⁄2”

12 Ft. Lengths Material: PVC Available only with 3/8” Film Tape

Fits 1/16”

1/16” 1/4

1⁄2”

Material: Rigid PVC 3/8” Foam Tape

Fits 1/8”

5/16”

23⁄32”

19/64”

45⁄64”

5/32”

Fits 1/16”

1/8”

Material: PVC Silver

PART #

600-* 600-*-A 600-SIL 600-SIL-A

PART #

2384-* 2384-*-A

PART #

210A-*

616-* 616-*-A

Fits 1/8”

13/32” 5/32” 5/16”

1⁄2” Tape

*WH - White *BK - Black *BR - Brown *SIL - Silver A = Available with Adhesive (1/2” Foam Tape) unless otherwise noted

Fits 1/64” 1⁄64” 11⁄32”

Adhesive

Fits 1/8”

5/32”

11/64”

9/16”

3/8”

7/16”

3/4”

1”

Fits 1/4”

1/4”

15/16” Material: PVC Silver

Material: ABS

PART #

P640-*

PART #

P630-*

1135-*

19/32” Fits 1/4” 1/4”

Fits 1/4” 7/16”

Fits 1/4”

1/4”

Fits 1/2”

15/32”

9/16”

1/2”

13/16”

650-* 650-*-A 650-SIL 650-SIL-A

31/32”

1”

37/64”

Material: ABS

PART #

P641-*

1032-*

Fits 5/8”

1/2” Fits 1/2”

3/8” 11/4” 3/4” Foam Tape

31/64”

Lengths: 12 Ft. • Material: ABS/Film Finishes Available

*POL/C - Polished Chrome *POL/B - Polished Brass *BRU/B - Brushed Brass *B/C - Brite Chrome unless otherwise noted

35/64” PART #

652-* 652-*-A

PART #

4068-*

Fits 3/4” 3/4” 9/16”

13/16” 11/16” PART #

4069-*

2395-*

METALLIC PLASTIC CAPPING

5/8” 41/64”

PART #

P631-*

9/16”

9/32”

Fits 5/32”

3/8”

31/64”

5/32”

7/32”

PART #

PART # 2469-*

1976-POL/C

For matching Divider Moulding, see next page

3/8” 3/4”

1/4” PART #

1949-POL/C

Fits 5/32”

Fits 1/4”

1/2”

1/8”

61/64”

Fits 1/8” 8 Ft. Lengths Material: ABS/Foil

PART #

11340B/C

COLOR PLASTIC DIVIDERS Lengths: 8 Ft. Material: Styrene

Adhesive

Colors Available

Cut Program Available

*WH - White *BK - Black *BR - Brown *SIL - Silver A = Available with Adhesive (1/2” Foam Tape) unless otherwise noted

SEE PAGE 29 FOR DETAILS

1⁄2” Tape

Fits 1/16”

3⁄8” 3⁄64” 3⁄8” 2383-* 2383-*-A

B 1⁄2”

Fits 1/8” Even Leg

13⁄8”

9⁄64”

11⁄16”

1⁄2”

Silver Material: PVC

1⁄8”

PART #

1⁄2”

15⁄64”

Material: ABS

19⁄32”

Fits 5/16”

Silver Material: PVC

13⁄16” PART #

1031-*

P651-* P651-*-A P651-SIL P651-SIL-A

Fits 3/8”

Fits 1/2”

3⁄4” 3⁄8”

1⁄2”

3⁄4”

1⁄2”

3⁄64”

11⁄4”

PART #

P660-*

PART #

4158-*

Fits 3/4” Even Leg CAP

3⁄4”

3⁄64”

PART #

4050-*

P750-*

PLASTIC CAP & DIVIDER SETS

3⁄4”

Fits 3/4”

3⁄4”

3⁄64” 13⁄8”

PART #

1⁄4”

Material: ABS

PART #

1134-*

5⁄16”

Fits 1/4”

29⁄32”

PART #

P601-* P601-*-A P601-SIL P601-SIL-A

883-*

Fits 1/4”

61⁄64”

11⁄8”

P751H-*

PART #

P611-*

Fits 1/8”

3⁄64”

9⁄64”

7⁄64”

PART #

Fits 1/8”

11⁄16”

P610-* P610-*-A

Fits 1/8”

3⁄64”

For matching Cap Moulding, see previous page

1⁄32”

PART #

Dividers with 11/16” Legs

5⁄32”

1⁄16”

1”

PART #

1⁄2”

Material: Rigid PVC

2384-* 616-* 600-* 1135-*

Works with Works with Works with Works with

COLOR DIVIDER SIZE CAP

2383-* 1/16” P610-* 1/16” P601-* 1/8” 1134-* 1/8”

650-* 1032-* 652-* 4069-*

Works with Works with Works with Works with

DIVIDER SIZE

P651-* 1031-* 4050-* P750-*

1/4” 1/4” 1/2” 3/4”

CAP

CLEAR DIVIDER SIZE

846-* Works with 2028-* 2030-* Works with 2029-*

1/8” 1/4”

CLEAR PLASTIC CAPPING Lengths: 12 Ft.

Adhesive

A = Available with Adhesive (1/2” Clear Tape) unless otherwise noted

Fits 1/64”

1⁄4”

Foam Tape

PART #

R 1⁄16”

Material: PVC

Material: Polyester

210-CL 210A-CL

23-CL 23A-CL

PART #

220-CL-A

3⁄32”

1” Foam Tape

23⁄32”

7⁄8”

Fits 1/4”

1⁄4”

1⁄8”

11⁄4” 125⁄32”

PART #

Fits 1/8”

Fits 3/32”

Fits 1/32”

7⁄8”

1⁄64”

PART #

12A-CL

11⁄32”

1⁄64” 11⁄32”

1⁄2”

7⁄16”

8 Ft. Lengths - Material: Styrolux

Material: PVC

Fits 1/64”

3⁄32”

1⁄8” 1⁄2”

Poly Tape

1⁄2” Tape

15⁄32”

5⁄16”

5⁄8”

13⁄16” 7⁄32”

White Foam Tape

8 Ft. Lengths - Material: Styrolux

Material: Butyrate

Material: Polyester

Material: Butyrate

55-5949 55-5949A

847-CL 847A-CL

846-CL 846A-CL

2030-CL

PART #

EARRING CARD HOLDER Fits 5/32”

PART #

CLEAR PLASTIC DIVIDER Lengths: 12 Ft. • Material: Butyrate

3⁄16” 1⁄4”

A = Available with Clear Adhesive

17⁄32”

1 1⁄16”

5⁄32”

1⁄2”

Adhesive

3⁄16” 15⁄16”

1⁄4”

1⁄2” Tape

7⁄8”

PART #

Material: Butyrate

PART #

2028-CL 2028-CL-CLA

PART #

2033-CL

1⁄4”

2029-CL 2029-CL-CLA

CLEAR PLASTIC JOINER MOULDING Lengths: 8 Ft. • Material: Butyrate • Fits 1/4” Material Divider

2 Way Corner

3 Way Corner

3⁄4”

4 Way Channel 3⁄4”

3⁄4”

U Channel 3/4”

1⁄4” (2) 1⁄4” (2)

1⁄4” (3)

1⁄4” (4) 1/4”

.050 Wall Thickness

.060 Wall Thickness

P2658

P2718

P2719

P2720

P2743

PART #

ALUMINUM CAPPING *M

Lengths: 12 Ft. Material: Aluminum

Finishes/Colors Available

*M, MH (w/holes) - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *S, SH (w/holes) - Satin/Clear Anodized - Dull Matte Finish *P, PH (w/holes) - Polished/Mechanical - Shiny/Mirror Finish Samples Are Available

Fits 1/16”

.718

.070

PART #

.200 .244 .700

PART #

ALU0214-S

ALU2334-*

Fits 5/32”

Fits 1/8” to 5/32” w/Punched Holes Hole/slot pattern Approx. Every 4”

.375

PART #

Fits 3/64” .156

.234

.187 .05 .718

.244 .700

.156

.144

PART #

ALU2000-*

PART #

ALU7441-S

ALU0204-S

Fits 1/4” to 9/32”

.380

w/Punched Holes

.110

.068

PART #

ALU2013-*

Hole/slot pattern Approx. Every 4”

Fits 3/32”

.188

.234

.781

*ORB, ORBH (w/holes) - Oil Rubbed Bronze Anodize Finish *BK, BKH (w/holes) - Black Powder Coated Finish *WH, WHH (w/holes) - Glossy White Powder Coated Finish

.187

.246

*WH (Glossy)

*BS

Fits 1/16”

.150 .750

.375

.875

PART #

ALU851-*

.280

.365

Fits 1/4” to 9/32”

w/Punched Holes Hole/slot pattern Approx. Every 4”

.625 1.188

.650 .375 1.00 .510

.281

PART #

ALU961-*

Fits 1/2”

PART #

ALU1851-*

ALUMINUM DIVIDER *M

Lengths: 12 Ft. Material: Aluminum

Finishes/Colors Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *S - Satin/Clear Anodized - Dull Matte Finish *P - Polished/Mechanical - Shiny/Mirror Finish Samples Are Available Fits 1/16”

*ORB - Oil Rubbed Bronze Anodize Finish *BK - Black Powder Coated Finish *WH - Glossy White Powder Coated Finish

.313

.625

.070

.15

*WH (Glossy)

*BS

.200

1.00

Fits 3/32” .10

1.25

PART #

ALU0023-*

ALU5044-S

Fits 5/32”

Fits 1/8” to 5/32” .500

.500

.375

.250

.156

.168 1.250

1.312

1.125

PART #

ALU849-*

PART #

ALU5639-*

ALU1798-*

Fits 1/4”

.370

.291

.562

Fits 1/4” to 9/32”

.500

0.50

.062

.251

Fits 1/4”

1.250

PART #

ALU4299-*

ALU850-*

Fits 1/4” to 9/32”

Fits 1/2”

.500

1.00 .308

.514

.424

.651 1.325

PART #

ALUT155-S

ALU1850-*

STAINLESS STEEL CAP & CORNER DIVIDER Lengths: 12 Ft. Material: All Stainless Steel 430 Grade (Magnet) • Polished-Shiny/Mirror Finish DIVIDER

1/2”

1-1/16” 1-1/4” PART #

SS1450-P

Fits 1/16”

CAP Punched with holes- spacing approx. 4-6”

PART #

SS1451-P

Fits 1/4”

CAP Punched with holes- spacing approx. 4-6”

PART #

SS851-P

ALUMINUM OUTSIDE CORNERS Lengths: 12 Ft. • Fits 3/4” Panel Boards • Patent #4840440 Finishes Available

*S - Satin/Clear Anodized - Dull, Matte Finish 2.750 1.750

.316

End Cap

Joiner .250

.090

.750

.099

.282 Punched Holes 3” Apart

.211

.040

.062

PART #

.765

1.500

.060

.375

.434 2

.75

.500

.750

Punched Holes 3” Apart

1.25

PART #

ALU5116-S

135° Angle

1.250 .090

90° Angle

1.500

ALU5299-S

90° Angle .011/-.007

.250

+.011 -.007 .282

PART #

ALU5164-S

.750 .282

.250

.065

1.000

R= .052

ALU5163-S

Shelf Support .812

Instructions: 2 Cutting Methods

1. Using Table saw 2. Using 5 piece cutter head w/shaper

Part # CW-TOOLS

.500

(sold separately, please inquire)

.500

45 Punched Holes 3” Apart

PART #

ALU5272-S

PART #

ALU5162-S

ALU5165-S

ALUMINUM CORNERS Lengths: 12 Ft.

Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines

Fits 1/16”

.852

*P - Polished - Shiny/Mirror Finish

INSIDE CORNERS

R .250

.125

*S - Satin/Clear Anodized - Dull, Matte Finish

Fits 9/32”

Fits 1/2” .188

.250

.070 PART #

PART #

ALU7792-*

Fits 3/4”

.790

PART #

ALU853-*

ALU1853-*

OUTSIDE CORNERS Fits 1/16”

Fits 9/32”

.259 .770 PART #

PART #

ALU1855-*

ALU852-*

ALU7791-*

Fits 1/2”

Fits 3/4”

1.250 .062 .762

PART #

ALU1852-*

PART #

ALU1854-*

PART #

ALU1857-*

PLASTIC CORNER CHANNEL MOULDING 90° Corner Channel

Cut Program Available

Lengths: 12 Ft. Material: Styrene

SEE PAGE 29 FOR DETAILS

*WH - White

*BK - Black

Colors Available

*BR - Brown s *DG - Dove Gray unless otherwise noted

s 5000 ft. minimum apply

Fits 1/16” Part Tapers For Friction Fit

.070

Fits 1/16” Gloss finish closely matches Acrylic and PETG sheets

.125” .375”

Color Clear Others Available Min. Apply Styrolux - 8 Ft. Lengths

.050”

90° .375

PART # 107-680-*

.375

PART # 107-681-*

.060” .300”

Fits 1/8”

Fits 1/4”

.135

3/8” 27/32”

.622

1/4” PANEL

Polypropylene

.060 .367

.135

.120

1/4”

PART # 184-*

.622

Fits 1/4”

1/2” 1/4”

PART # 107-685-*

27/32”

Fits 1/2”

3/4”

.045

1/2”

1-3/8”

8 Ft. Lengths

90°

8 Ft. Lengths

PART # 107-664-*

3/16”

PART # 107-687-*

5/8”

Fits 5/8”

23/32”

Fits 3/4”

3/4”

5/8”

3/4” 1-27/64”

1-11/16”

8 Ft. Lengths PART # 107-688-*

3/4”

8 Ft. Lengths PART # 107-689-*

3/4”

60° Corner Channel Lengths: 8 Ft. Material: Styrene

*WH - White

*BK - Black

1/4”

Colors Available

*BR - Brown s *DG - Dove Gray

Fits 1/4”

1/2”

s 5000 ft. minimum apply

Fits 1/2”

3/4”

17/32”

3/16” 3/64”

PART # 107-665-*

.060

PART # 107-667-*

ALUMINUM SHOWCASE MOULDING Lengths: 12 Ft.

Rail

Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *P, PH (w/holes) - Polished/Mechanical - Shiny/Mirror Finish or z Brite Dip Anodize *S - Satin/Clear Anodized - Dull Matte Finish B

PART #

ALU701-S

Single Track C

PART #

Z-Clip B

PART # ALU113-P z

3/4” 1/16” ALU235-* z 5/16” 3/8” ALU237-* 3/4” 39/64” 1-5/8” 3/64” ALU239-* 3/4” 1-1/4” 2-1/8” 1/16”

With holes - spacing approx. 6-7”

ALUMINUM OVERLAP FACE NOSING Lengths: 12 Ft. w/Countersunk Holes

Part #

ALU968-* z ALU228-* z ALU128-* z ALU28-* z ALU328-* ALU428-*

Finishes Available

*MH (w/holes) - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *PH (w/holes) - Polished/Mechanical - Shiny/Mirror Finish or z Brite Dip Anodize *BSH (w/holes) - Brushed Satin - Lightly Brushed (Shows Grain) Satin Finish

Hole Underlip Overall Spacing A B 6” 7” 7” 6” 6” 7”

5/8” 3/4” 7/8” 1-1/16” 1-1/4” 1-5/8”

11/16” 13/16” 15/16” 1-1/8” 1-5/16” 1-11/16”

Lip C

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Countersunk Holes

ALUMINUM ROUNDED TRIM Lengths: 12 Ft. w/Countersunk Holes-6” on Center

Part #

Finishes Available

*MH (w/holes) - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *SH (w/holes) - Satin/Clear Anodized - Dull Matte Finish

ALU436-* ALU437-* ALU438-* ALU439-*

3/8” 1/2” 3/4” 1”

5/32” 3/16” 3/16” 3/16”

Countersunk Holes

ALUMINUM ROUNDED EDGE TRIM Lengths: 12 Ft. w/Countersunk Holes-6” on Center Finishes Available

*MH (w/holes) - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *SH (w/holes) - Satin/Clear Anodized - Dull Matte Finish

Part #

ALU427-* ALU429-*

Countersunk Holes

3/8” 3/8”

3/16” 15/16” 3/16” 1-11/64”

ALUMINUM PANEL CLIPS “A FAST, EASY, & COST EFFECTIVE

Lift-Off is the

Method Of Hanging Cabinets, Wall Panels, Partitions, & Signage!”

space needed to raise the panel over the resting height

Projection is

the distance between the wall and the panel

0.198

PART #

SIZE

PART #

SIZE

ALU111-4 4’ x 1.785” ALU111-8 8’ x 1.785”

4’ & 8’ Lengths With Punched Holes Projection: 0.180” Lift Off: 0.750”

4’ & 8’ Lengths With Punched Holes

PART #

ALU112-4 ALU112-8

1.375

SIZE

4’ x 1.375” 8' x 1.375”

4’ & 8’ Lengths With Punched Holes 3/16” Dia. Hole, Screw Size 10 Projection: 0.240” Lift Off: 0.375” 0.125

PART #

0.120

PART #

0.360

4’ & 8’ Lengths (Without Holes) PART #

4’ & 8’ Lengths With Punched Holes

PART #

0.750

PART #

ALUHAC22-M 12’ x 2.25”

PART #

.44 .800

Projection: 0.250” Lift Off: 0.750”

ALUHAC22-MH* 12’ x 2.25”

Pre-Cut With 2 Punched Holes (Approx. 1-1/2” Apart)

1.00

2.00

PART #

ALUHAC23-M

SIZE

12’ x 2.00”

3/16” Dia. Hole, Screw Size 10 PART #

SIZE

ALUHAC23-MH* 2” x 2.00”

*MH or *H: Denotes Lengths with punched holes 8” OC

Size

4’ & 8’ Lengths With Punched Holes 3/16” Dia. Hole, Screw Size 10

0.250

PART #

Projection: 0.240” Lift Off: .440”

Size

ALUHA4049-4-MH* 4' x 1.75” ALUHA4049-8-MH* 8' x 1.75”

Pre-Cut With 2 Punched Holes (Approx. 1-3/4” Apart) PART #

ALUS4049-25-M

0.440

SIZE

2.5” x 1.449”

4’ & 8’ Lengths (Without Holes) PART #

1.750

SIZE

12’ Lengths With Punched Holes Projection: 0.210” Lift Off: 1.000”

PART #

ALUS4049-4-M ALUS4049-8-M

LENGTH

4' x 1.449” 8' x 1.449”

4’ & 8’ Lengths With Punched Holes

ALUHAC23-2-M 2” x 2.00”

12’ Lengths (Without Holes)

4’ & 8’ Lengths (Without Holes) ALUHA4049-4-M 4' x 1.75” ALUHA4049-8-M 8' x 1.75”

.580

3/16” Dia. Hole, Screw Size 10

SIZE

Size

ALUHA4049-25-M 2.5” x 1.75”

1.449

12’ Lengths With Punched Holes PART #

Size

Pre-Cut With 2 Punched Holes (Approx. 1-3/4” Apart)

SIZE

PART #

ALU211-4H* 4’ x 1.595” ALU211-8H* 8’ x 1.595”

Projection: 0.250” Lift Off: .360”

2” x 2.25”

12’ Lengths (Without Holes) 2.25

3/16” Dia. Hole, Screw Size 10

ALU112-4H* 4’ x 1.375” ALU112-8H* 8' x 1.375”

ALUHAC22-2-M

Size

ALU211-4 4’ x 1.595” ALU211-8 8’ x 1.595”

1.595

SIZE

Pre-Cut With 2 Punched Holes (Approx. 1-1/2” Apart)

Size

ALU211-2-M 2” x 1.595”

SIZE

4’ & 8’ Lengths (Without Holes)

Size

Pre-Cut With 2 Punched Holes (Approximately 1-1/2” Apart)

ALU112-2-M 2” x 1.375”

0.375

PART #

ALU333-4-MH* 4' x 1.25” ALU333-8-MH* 8' x 1.25”

Projection: 0.198” Lift Off: .673”

ALU111-4H* 4’ x 1.785” ALU111-8H* 8’ x 1.785” PART #

0.115

Size

4' x 1.25” 8' x 1.25”

3/16” Dia. Hole, Screw Size 10

SIZE

Pre-Cut With 2 Punched Holes (Approx. 1-1/2” Apart)

PART #

ALU333-4-M ALU333-8-M

1.250

3/16” Dia. Hole, Screw Size 10 PART #

4’ & 8’ Lengths (Without Holes)

0.673

4’ & 8’ Lengths (Without Holes) 1.785

0.042

.075

ALU111-2-M 1.5” x 1.785”

0.750

Attaches To Wall

For our Acrylic Z & W Bar, see page 117

Pre-Cut With 2 Punched Holes (Approx. 1-1/2” Apart) 0.092

Attaches to Cabinet

3/16” Dia. Hole, Screw Size 10 0.250

Projection: 0.250” Lift Off: .440”

PART #

LENGTH

ALUS4049-4-MH* 4' x 1.449” ALUS4049-8-MH* 8' x 1.449”

BUBBLE LEVEL

Acrylic bubble level used for leveling our panel clips, or any other horizontal surface. 9/16”W x 1-9/16”L BL-1

PLASTIC CLEAR RIGHT ANGLE MOULDING

Cut Program Available

Lengths: 12 Ft. Material: Butyrate

SEE PAGE 29 FOR DETAILS

1/2”

approx. 040 thickness

1/2”

7/16

PART #

519-CL

approx. 070 thickness

3/4”

1/2”

3/4”

PART #

520-CL

approx. 095 thickness

1”

PART #

1748-CL

1749-CL

PLASTIC COLOR ANGLE W/ADHESIVE approx. 100 thickness

Lengths: 12 Ft. • Material: Styrene

approx. 095 thickness

2”

Colors Available

*WH - White

1-1/4”

.320

1-1/4”

2”

PART #

1750-CL

*BK - Black

1/4” FOAM TAPE

PART #

2206A-*

.450

1755-CL

Fits 5/16” x 7/16”

PLASTIC METALLIC ANGLE MOULDING W/ADHESIVE Lengths: 12 Ft. Material: ABS/Mylar Finishes Available

*POL/B - Polished Brass

*POL/C - Polished Chrome *BRU/B - Brushed Brass Please inquire as finishes vary from style to style

Fits 1/2”

Fits 3/8” .365/ .385

.490/ .510

PSA TAPE

.200

.345/ .365

Fits 3/4”

.740/ .760

PSA TAPE 1/4”

PSA TAPE

.750/ .770

PART #

2407-

Without Tape

.240/ .260

.300 .320

.720/ .740

PART #

2406-

.995 1.025

1/2”

.470/ .490

PART #

*BRU/C - Brushed Chrome

PART #

2409-

PART #

2001-

2163-

ALUMINUM & STAINLESS STEEL COVE MOULDING Lengths: 12 Ft.

Finishes Available

*P, *PH (w/holes) - Polished - Shiny/Mirror Finish *S - Satin/Clear Anodized - Dull, Matte Finish *BS, BSH (w/holes) - Brushed Satin - Lightly Brushed (Shows Grain) Satin Finish We can also supply custom orders without holes - minimums apply - please inquire.

Reverse cove moulding is used to cover up seams or joints wherever two perpendicular planes meet. The sink top to its backsplash or the ceiling to a wall surface represent typical applications for which our reverse cove moulding was designed. The leg of the profile seals tightly against both surfaces to lend a cleanly trimmed appearance to the finished product. 3/16”

Counter sunk holes spacing every 7”

Punched holes spacing every 4-1/2”

PART # ALU141-PH

PART # ALU121-PH .05

Counter spacing

Counter sunk sunk holes holes spacing every 6-1/2” every 6-1/2”

.8125 .065 - .104 .500

PART #

ALU669-*

Counter sunk holes spacing every 6-1/2”

PART #

ALU1016-PH

STAINLESS STEEL Back Splash Cove (Long Flange, Narrow Overlap)

Grade 430(Magnetic) PART #

SS799-P

5/16” 1/16” 5/8”

Not Available With Holes

Counter sunk holes spacing every 6-1/2”

PART # ALU426-S

PART # ALU441-PH

STAINLESS STEEL COUNTER EDGE SNAP ON MOULDINGS 9/16” Grade 430(Magnetic) PART #

SS801A-P

1”

25/32”

PLASTIC COLOR RIGHT ANGLE MOULDING Lengths: 12 Ft. Material: Styrene

Cut Program Available

Colors Available

SEE PAGE 29 FOR DETAILS

*WH - White *BK - Black *BR - Brown unless otherwise noted

(approx. .050 thickness)

1⁄4”

(approx. .055 thickness)

1⁄2” 85˚/90˚ 1⁄4”

PART #

1919-

5⁄8”

PART #

1933-

85˚/90˚

5⁄8”

1⁄2”

(approx. .100 thickness)

1-1⁄4”

(approx. .060 thickness)

85˚/88˚

1-1⁄4”

1937-

1936-

(approx. .100 thickness)

(approx. .100 thickness) 132˚/138˚

1”

57˚/63˚

1” 1”

1”

PART #

1938-

PART #

1935-

1-1⁄2”

PART #

1”

PART #

87˚/90˚

1-1⁄2”

PART #

85˚/90˚

1”

3⁄4”

(approx. 045 thickness)

Material: Rigid PVC

(approx. .100 thickness)

+0˚ 90˚ -3˚

3⁄4”

1934-

(approx. 125 thickness)

1-1⁄2”

(approx. .075 thickness)

PART #

1940-

PART #

1951-

1952-

PLASTIC COLOR UNEVEN ANGLE MOULDING Lengths: 12 Ft. Material: Styrene Colors Available

*WH - White

Fits 5/16” x 7/16”

Fits 1/2” x 1”

(approx. .050 thickness)

*BK - Black

Fits 1-1/4” x 3/8”

(approx. 040 thickness)

7⁄16” 90˚

Fits 1” x 2”

(approx. 040 thickness)

(approx. .062 thickness)

3”

2”

1-1⁄4”

1”

Fits 1” x 3”

(approx. .040 thickness)

5⁄16”

R .015”

1⁄2” PART #

3⁄8”

PART #

2206-

1”

PART #

1920-

1”

PART #

1441-

PART #

1921-

1922-

PLASTIC FLEXIBLE UNEVEN ANGLE MOULDING Material: PVC • Black

Fits 1/2” 1⁄2” 19⁄64”

Adhesive

3⁄32”

Fits 3/4” 7⁄64”

3⁄4” Adhesive

17⁄64”

Fits 7/8” 7⁄64”

7⁄8” Adhesive

150 Ft. Coils

100 Ft. Coils

50 Ft. Coils

807-631-BK

807-555-BK

807-591-BK

PART #

17⁄64”

PART #

ALUMINUM EVEN ANGLE MOULDING Lengths: 12 Ft. Material: Aluminum Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *P - Polished /Mechanical- Shiny/Mirror Finish *S - Satin/Clear Anodized - Dull, Matte Finish Special Order: Other Colors Available, Please Inquire

1/2” x 1/2” .500

.750

.125

.500 .500

.500 PART #

PART #

ALU269-18-*

ALU222-*

3/4” x 3/4” .0625

.750

R .031 .0625

.125

.750

PART #

ALU449-*

ALU136-*

1” x 1”

.062

PART #

135˚ .062

PART #

ALU444-*

PART #

ALU469-*

ALU469-135-*

1” x 1”

.125

1” x 1” 1.000

.125 .1875

PART #

ALU569-*

1-1/2” x 1-1/2” 1.500

1.250

.062 1.250

ALU749-316-*

1-1/4” x 1-1/4”

1-1/2” x 1-1/2” 1.500

.125

ALU5569-*

1.250

PART #

ALU749-*

1.250

HEAVY DUTY

1-1/4” x 1-1/4”

1.000

PART #

1” x 1” (135˚) 1.000

1.000

.050

.063 .813

PART #

ALU369-*

1.000

.813

.750

Satin Finish

1.000

13/16”x 13/16”

3/4” x 3/4”

.750

Mill & Polished Finish

.044 .750

PART #

ALU269-*

.750

3/4” x 3/4”

1/2” x 1/2”

.062

.125

.062 1.500 PART #

ALU1569-*

1.500 PART #

ALU1569-18-*

ALUMINUM EVEN ANGLE MOULDING Lengths: 12 Ft. Material: Aluminum Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *P - Polished/Mechanical - Shiny/Mirror Finish *S - Satin/Clear Anodized - Dull, Matte Finish Special Order: Other Colors Available, Please Inquire

1-1/2” x 1-1/2”

2” x 2”

2.000

2.000 1.500

.062

.125 .1875

.125

2.000

1.500

2.000

PART #

ALU4469-*

ALU1569-316-*

ALU8469-*

2” x 2”

2.000 .125 .1875 2.000 PART #

ALU4469-316-*

ALUMINUM UNEVEN ANGLE MOULDING Lengths: 12 Ft. Material: Aluminum Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *BSH (w/holes) - Brushed Satin - Lightly Brushed (Shows Grain) Satin Finish

*P, PH (w/holes) - Polished/Mechanical - Shiny/Mirror Finish *S - Satin/Clear Anodized - Dull, Matte Finish

1/4” x 1/2” .050

.250

3/8” x 3/4”

PART #

ALU888-*

1/2” x 13/16”

.065 - .104

3/4” x 1-1/4”

1/2” x 1” .062

.500 1.000

.500 PART #

PART #

ALU249-*

.8125

ALU669-*

.750

PART #

ALU149-*

Counter sunk holes spacing every 6-1/2”

.500

.750

.500

.05

.062

.375

1/2” x 3/4” .062

PART #

ALU904-*

.750

.062 1.250 PART #

ALU555-*

PLASTIC SLIDING DOOR TRACK Lengths: 12 Ft. Material: Polypropylene Colors Available

*WH - White K101-4079 R26-62 K101-610

*BK - Black *BR - Brown unless otherwise noted

UPPER TRACK For: K101-606, K101-610, K101-601 Styrene PART #

NATURAL NYLON WHITE LOCKING GLIDES

*AL - Almond

Nylon Glides Are Recessed Into The Door

LOWER DOUBLE FLAT TRACK

Mounts onto 1/4” mortise on the bottom of each door with a brad nail.

For 5/8” Doors

PART #

K101-4079-*

K101-606-*

LOWER DOUBLE FLAT TRACK

For Use with: K101-606, K101-610, K101-601

LOWER SINGLE FLAT TRACK

For 3/4” Doors

1/4” x 1/4” x 1”

100 & 500 Ft. Coils

PART #

K101-610-*

PART #

K101-601-*

No Glides or Wheels Needed – For Light Weight Doors Lengths: 12 Ft. Material: Styrene

For 1/8” Doors *5/32” gap

*WH - White

Colors Available

*BK - Black

*BR - Brown

*BE - Beige

Lengths: 12 Ft. Material: Polypropylene Brown

ANTI-RATTLE FEATHER TRACK

For 1/4” Doors *5/16” gap

PART #

R26-62WH

For 3/16”-1/4” glass/panel

PART #

180-*

140-*

For 1/2” Doors *9/16” gap

For 3/4” Doors *13/16” gap

PART #

R101-603-BR

NOTE:

PART #

ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.

340-*

120-*

PLASTIC MIRACLE TRACK Sliding Door Track System With Wheels Material: Styrene • With or With Adhesive

For 1/4” Doors

Colors Available

NOTE: Rough Opening Less 7/8” = Door Size

*BK - Black

*SG - Silver Gray

High Quality Easy-Roll Metal Ball Bearings With Economy Of Plastic Track

PART #

MT38-*

With Adhesive - Available in 4 & 8 Ft. Lengths

PART #

MT38-A4-* MT38-A8-*

PLASTIC MIRACLE TRACK II

PART #

LENGTH

4 ft. 8 ft.

PART #

MTR

Sliding Door Track System With Wheels Lengths: 12 Ft. • Material: PVC • Silver Gray - OUR MOST POPULAR ASSEMBLYComplete Set Consists Of: 1 x 12 Ft. Length Upper Track 1 x 12 Ft. Length Shoe 1 x 12 Ft. Length Lower Track 1 Wheel Per Running Ft.

MT39-SG

Additional Wheels

Complete Set Consists Of: 1 x 12 Ft. Length Upper Track 1 x 12 Ft. Length Shoe 1 x 12 Ft. Length Lower Track 1 Wheel Per Running Ft.

Without Adhesive - Available in 12 Ft. Lengths

For 1/4” Doors

With or Without Peel & Stick Adhesive

• Lower track has sidewalls to prevent rollers from slipping off track • 1” (25.4mm) shoe allows superior gripping of glass or plywood doors • Deep upper track to allow extra clearance and easy installation • Zinc plated rollers with plastic wheel • Track & shoe material is rigid PVC

Additional Wheels

PART #

MTR2

ALUMINUM SLIDING DOOR TRACK Lengths: 12 Ft.

Finishes Available

M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines

Wheels every 4-1/2”. Use 2/3 of the track with wheels.

For Up to 1/4”Doors

Example:

6 ft. opening use 4 ft. of roller system. Galvanized Steel

PART # ALU7474-M

Galvanized Steel

PART # ALURC4-12

For 1/8” Doors

PART # ALUSH2-12

For 1/4” Doors

PART # ALUT18-M

For 1/2” Doors

PART # ALUT14-M

For 3/4” Doors

PART # ALUT34-M

PART # ALUT12-M

For 3/4” Doors

No Glides or Wheels Needed

PART # ALUT134SP-M

ULTRA PILE DUST SEAL / WEATHERSEAL w/ADHESIVE Lengths: 50 Ft. Coils • Gray Self Supporting Pile Is Always On Center And Has The Integrity And Consistency To Ensure A Tight Seal MANY APPLICATIONS: Windows Doors Showcases PART# DESCRIPTION DS-150-GY .270 W x .150 H DS-200-GY .270 W x .200 H

ALUMINUM TUBES, RODS, BARS & SQUARES Finishes Available

*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines

*S - Satin/Clear Anodized - Dull, Matte Finish

SQUARE BAR

SQUARE TUBE

Length: 8 & 12 Ft.

Length: 12 Ft.

PART # ALUX211-M ALUX212-M ALUX213-M ALUSQ14-M

WALL O.D. THICKNESS 1/2” .050” 3/4” .050” 1” .050” 1-1/4” .125”

PART # DIMENSIONS ALUB25-M 1/4” x 8 Ft. ALUB50-M 1/2” x 12 Ft. ALUB625-M 5/8” x 12 Ft. ALUB6750-M 3/4” x 8 Ft.

RECTANGULAR TUBE

RECTANGULAR BAR

Length: 12 Ft.

PART # ALURT15-M B ALURT12-M ALURT24-M

WALL A B THICKNESS 1” 1/2” .125 2” 1” .125 4” 2” .125

ROUND TUBE Length: 8 Ft.

PART # ALU799-M ALU800-M ALU801-M ALU802-M ALU803-M ALU798-M

WALL O.D. THICKNESS 1/4” 1/16” 1/2” 1/16” 3/4” 1/16” 1” 1/16” 1-1/2” 1/16” 1-1/2” 1/8”

DECORATIVE WHITE PLASTIC TUBING Material: Styrene • Round or Square

PART # DIMENSION DESCRIPTION LENGTH 800R-75 3/4" Round 4 ft. 800R-875 7/8" Round 4 ft. 800R-1 1" Round 4 ft. 800R-1-25 1-1/4" Round 4 ft. 800R-1-75 1-3/4" Round 4 ft. 800S-75 3/4" Square 8 ft.

Length: 8 Ft. (z 8 Ft. lengths only) B A

PART # ALU600-* ALU601-* ALU603-* zALU599-18-* zALU600-18-* ALU601-18-* ALU603-18-* ALU604-18-*

A 3/4” 1” 1-1/2” 1/2” 3/4” 1” 1-1/2” 2”

B 1/16” 1/16” 1/16” 1/8” 1/8” 1/8” 1/8” 1/8”

ROUND ROD Length: 8 Ft. PART # ALUR14-M ALUR375-M ALUR12-M ALUR58-M ALUR34-M ALUR100-M

DIMENSIONS 1/4” x 8 Ft. 3/8” x 8 Ft. 1/2” x 8 Ft. 5/8” x 8 Ft. 3/4” x 8 Ft. 1” x 8 Ft.

HEAVY DUTY WHITE FURNITURE GRADE PVC TUBING Lengths: 8 Ft. • 1-1/4” O.D. • .060 Wall PART # PD125-WH

FOR END CAPS & GLIDES, SEE PAGES 244-252

CLEAR ACRYLIC SHAPES Length: 6 Ft.

ROUND TUBES

PART # 10701 10702 10703 10704 10705 10706 10708 10709 10710 10711 10712 10713 10714 10715 10716 10717 10718 10719 10720 10721 10723 10724 10725 10726 10727 10728 10729 10730

O.D. 1/4” 5/16” 3/8” 3/8” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 7/8” 7/8” 1” 1” 1-1/4” 1-1/4” 1-1/2” 1-5/8” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3” 4” 4 1/2” 5” 6”

I.D. WALL THICK. 1/8” 1/16” 3/16” 1/16” 1/4” 1/16” 1/8” 1/8” 3/8” 1/16” 1/4” 1/8” 1/2” 1/16” 3/8” 1/8” 5/8” 1/16” 1/2” 1/8” 3/4” 1/16” 5/8” 1/8” 7/8” 1/16” 3/4” 1/8” 1” 1/8” 1-1/8” 1/16” 1-1/4” 1/8” 1-3/8” 1/8” 1-1/2” 1/8” 1-3/4” 1/8” 2” 1/8” 2-1/4” 1/8” 2-1/2” 1/8” 2-3/4” 1/8” 3-3/4” 1/8” 4-1/4” 1/8” 4-3/4” 1/8” 5-3/4” 1/8”

EQUILATERAL TRIANGULAR RODS

PART # SIDES 10401 1/2” 10402 5/8” 10403 3/4” 10404 1”

HALF BALLS

PART # DIAMETER 13002 3/8” 13004 1/2” 13006 5/8” 13007 3/4” 13009 1” 13012 1-1/2” 13013 1-3/4” 13014 2”

ROUND RODS

HALF ROUND RODS

PART # DIAMETER 10102 1/8” 10103 3/16” 10104 1/4” 10105 5/16” 10106 3/8” 10108 1/2” 10110 5/8” 10111 3/4” 10112 7/8” 10113 1’ 10114 1-1/8” 10115 1-1/4” 10116 1-1/2” 10117 1-3/4” 10118 2”

PART # DIAMETER 10201 1/2” 10202 5/8” 10203 3/4” 10204 1”

SQUARE RODS

PART # SQUARE 10301 1/8” 10302 3/16” 10303 1/4” 10304 3/8” 10305 1/2” 10306 5/8” 10307 3/4” 10308 1”

CUBES

PART # 14001 14002 14003 14004 14005 14006 14007 14008 14009

CUBE 1/4” 3/8” 1/2” 5/8” 3/4” 1” 1-1/4” 1-1/2” 2”

RECTANGULAR RODS

PART # 10801 10802 10803 10804 10805 10806 10807 10808

SIZE 1/8” x 3/8” 1/8” x 5/8” 3/16” x 1/2” 3/16” x 3/4” 1/4” x 1/2” 1/4” x 1” 5/8” x 1” 3/4” x 1”

SQUARE SPIRAL RODS

PART # 10501 10502 10503 10504 10505

POINT TO POINT 3/8” 1/2” 5/8” 3/4” 1”

SPHERES

PART # DIAMETER 12004 1/4” 12007 3/8” 12009 1/2” 12011 5/8” 12012 3/4” 12014 1” 12016 1-1/4” 12017 1-1/2” 12018 1-3/4” 12019 2” 12022 3”

PLASTIC PANEL HINGE Lengths: 12 Ft. Material: Polypropylene

Fits 3/16” Panels

Fits 1/8” Panels

Colors Available

*WH - White *BK - Black *BR - Brown

PART #

103-634-*

Fits 1/4” Panels

PART #

*CL - Clear

1.450/1.500 .250

.093

.485/.515 .550/.575

.093 .175/.200

.250 .260/.290

.485/.515 .600/.650

1.600/1.650

PART #

1.725/1.775

PART #

108-640-*

Fits 1/4” Panels

Fits 3/16” Panels

Fits 3/16”-1/4” Panels 1.500/1.550

103-4175-*

Lengths: 12 Ft. Lengths Material: PVC • Clear w/White Web

Colors Available *BK - Black

PART #

103-637-*

Lengths: 12 Ft. • Material: PVC Fits 1/8” Panels

Fits 1/2” Panels

Fits 3/8” Panels

103-635-*

*WH - White

103-571-*

PART #

108-641-*

PART #

P4506-CL

P4440-CL

PLASTIC TEE HINGE Lengths: 12 Ft. Material: Polypropylene Colors Available

*WH - White

*BK - Black

For 1/2” Panel

*BR - Brown

For 5/8” Panel

For 3/4” Panel

Use S1 or S7 Slotter

Use S055 Slotter PART #

PART #

103-631-*

103-630-*

PART #

103-632-*

FLAT HINGE Lengths: 100 Ft. Coils Material: PVC Clear w/White Web

Lengths: 100 & 500 Ft. Coils Material: Polypropylene Colors Available *WH - White *BK - Black *BR - Brown

.035/.045 Thick

.062/.070 Thick

.086 Thick

103-639-*

103-638-*

P4169-CL

PART #

Lengths: 5 Ft. Material: P.E.T.G./PVC w/ Glue Groove Clear PART #

9888H

PART #

Lengths: 5 Ft. Material: Acrylic/PVC Clear PART #

696H

ADJUSTABLE PANEL/GLASS RETAINER Lengths: 12 Ft. Material: RPVC Accomodates all panels at 1/16”, 1/8” & 1/4”

Outside Look Inside Look

Outside Retainer

Colors Available

G L A S S

Insert May Be: • Glass • Markerboard • Tackboard • Expanded Metal Grilles • Woven Wire Grilles • Decorative MDF Screening Panel

Inside Retainer

1.025”

.375”

.720”

1⁄16”, 1⁄8” or 1⁄4”

*LB - Light Beige *FW - Frost White *PLT - Platinum unless otherwise noted

.400”

Insert

Door Frame

PART #

.820”

Platinum

Front View

Back View

SOLD IN SETS

.075”

Frosty White

Light Beige

PVC Retainer Strip

6500-*

PANEL RETAINER Lengths: 500 Ft. Coils Material: Vinyl Colors Available

*WH - White *BK - Black *BR - Brown unless otherwise noted

STAPLE TYPE

100 Ft. Coils

PART #

102-625-*

PART #

102-680-*

102-627-*

100 Ft. Coils

PART #

102-681-*

PART #

102-645-*

PART #

102-698-*

102-644-*

100 Ft. Coils

PART #

102-778-*

PART #

102-623-*

PART #

102-624-*

102-620-*

Lengths: 500 Ft. Coils Material: Vinyl • Use S4 or S10 Slotter Colors Available

*WH - White

*BK - Black *BR - Brown unless otherwise noted

*CL - Clear

GROOVE TYPE

.455 .520

#102-648 is also available in Fruitwood; #102-621 is also available in Fruitwood & Clear

.150 .170

PART #

102-648-*

13 32

.410 .165

100 Ft. Coils

.415 .165

PART #

102-621-*

.150 .170

.520 .590

100 Ft. Coils

.145 GROOVE .130 SIZE

PART #

102-646-*

BUMPER GUARD MOULDING Material: Polyethylene Colors Available

*BK - Black

*BR - Brown

12 Ft. Lengths

250 Ft. Coils

PART #

K106-555-*

K106-544-*

INDUSTRIAL BUMPER MOULDING Material: PVC

Colors Available

1/64”

WH - White

1/2”

BK - Black

9/16”

7/8”

1/2”

Black And White - 50 Ft. Coils PART #

SJ-5510-BK SJ-5510-WH

Black Only - 100 Ft. Coils

2122-BK

1968-BK

PART #

FLEXIBLE FLAT BUMPER MOULDING w/ADHESIVE

CHAIR EDGE GUARD MOULDING

Lengths: 8 Ft. & 25 Ft. Coils Material: PVC • Black

Lengths: 100 & 600 Ft. Coils Material: Vinyl • Clear

Makes an excellent wall guard/cart guard

.400 .150 .055 .925

PART #

278-BK-8 278-BK-25

Bend To Create Even Or Uneven Leg Angles

Use on corner or use as a flat wall bumper

PART #

403-023-000-0600R

TABLE GUARD MOULDING Lengths: 100 & 500 Ft. Coils • Staple To Surface .240 .250

.217 9/16”

Vinyl - Clear PART #

101-CL

9/16”

PVC/Film Brite Brass - Brite Chrome PART #

101-B/B 101-B/C

.411

VINYL WALLBASE BASEBOARD MOULDINGS

FEATURES:

PROFILE:

• Full .080” gauge. • Co-extruded. • Heavier wear layer. • Precision cut ends. • Shrink free. • No blanching. • Abrasion resistant. • Washable surface. • Soft and workable. • Contemporary colors. • Inside and outside corners made easily.

A B C D E F G H I J K L

PART # BB-448-210 BB-448-220 BB-448-410 BB-448-310 BB-448-300 BB-448-320 BB-448-800 BB-448-500 BB-448-600 BB-448-950 BB-448-400 BB-448-100

COLOR Cocoa Beige Almond Pewter Charcoal Silver Mauve Seagreen Wedgewood Wine White Black

C D F K L

PART # BB-648-410 BB-648-310 BB-648-320 BB-648-400 BB-648-100

Custom Colors Available 3000 Ft. Minimum, Please Inquire. MSDA AVAILABLE UPON REQUEST

DESCRIPTION HEIGHT (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” (4 ft. lengths & 100 ft. coils) 4” COLOR Almond Pewter Silver White Black

DESCRIPTION HEIGHT (100 ft. coils) 6” (100 ft. coils) 6” (100 ft. coils) 6” (100 ft. coils) 6” (100 ft. coils) 6”

PLEASE NOTE: There is 100 ft. per box for BB-448-* (25 ea. 4” H x 4’ L pcs.)

ADHESIVE

CARTRIDGE PART # WB-ADH-C

WHITE ACRYLIC LATEX ADHESIVE, QUICK-DRYING &NON-FLAMMABLE.

QUART

PART # WB-ADH-Q

GALLON

PART # WB-ADH-G

U.S. FEDERAL SPECIFICATIONS:

.080” gauge Vinyl Wallbase conforms to all requirements of Federal Specification #SS-W-40A Type 2 Vinyl Plastic: .080” Thickness. Class 1 Vinyl Chloride. FLAME SPREAD AND SMOKE DEVELOPMENT RESULTS:

Wallbase has a Flame Spread Index of 20 and Smoke Development Value of 290. Test results, calculated in accordance with ASTM-E84-912. The National Fire Protection Association Life Safety Code 101, Section 6-5.3, “Interior Wall and Ceiling Finish Classification”, classifies materials with respect to Flame Spread and Smoke Development. When tested in accordance with NFPA 255, Vinyl Wallbase gained a Class A rating.

VINYL CARPET/FLOOR MOULDINGS BLACK - 12 FT. LENGTHS PART # CT-250-BK

1/4” Carpet Reducer Transition reducer for glue down carpets; with 1/4” undercut.