www.jbctools.com
NA
NANO STATION
NA / NANO STATION NA-2B / NA-1B / NA-9B
NT105-A
NP105-A
CONTROL UNIT
NANO SOLDERING
NANO TWEEZERS *
MANUAL
IRON *
w w w.jbctools.com
NA NANO STATION
0009848 ALLEN KEY 1,5mm 0012755 x2
0011568
TOOL HOLDER
CARTRIDGE SET Nยบ1 * CONTAINS:
Screws already assembled
C105101 x1 C105103 x1 C105105 x2 C105107 x1
POWER CORD
C105112 x1 C105113 x2
CL6230
CL6210
0011806 x2
N1738
METALLIC BRUSH
BRASS WOOL
CARTRIDGE EXTRACTOR
SLEEVES
These accessories are already assembled in the control unit and nano tweezers * These accessories are not supplied with NA-2B / NA-1B / NA-9B control units
2
INSTALLATION NT105-A
NP105-A
NANO SOLDERING IRON
NANO TWEEZERS
NA-2B / NA-1B / NA-9B CONTROL UNIT
Main switch Power cord socket Equipotential connector
ACCESSORIES
PART NAMES Cable collector
A1205 TOOLS EXTENSION CORD (1m.) Heat Management
P-105 PEDAL Intelligent process control Metallic brush
Cartridge extractor and tip aligner Brass wool
Sold separately
3
NA / NANO STATION TOOL HOLDER ASSEMBLY
CABLES ASSEMBLY
1
NANO TWEEZERS NANO IRON
2
FAST CARTRIDGE CHANGE
1 2
4
TIP ALIGNMENT
METALLIC BRUSH REPLACEMENT
CARTRIDGE EXTRACTOR REPLACEMENT
5
NA / NANO STATION C105 CARTRIDGE RANGE All the cartridges shown are actual size. All dimensions are in milimiters (mm). ¥
¥
¥
¥
C105-101
C105-103
C105-106
C105-107
0,2 x 0,1
0,4 x 0,2
_
1 x 0,3
1,8 x 0,5
C105-116
C105-117
C105-108
C105-113
C105-114
¥
¥
ø 0,5
C105-105
C105-110
0,7
3,5
C105-111
0,3
C105-109
1
2,5
C105-112
Contact JBC if other shapes are needed.
C105-115 Stainless steel tip
HEAT MANAGEMENT JBC stations intelligently manage the tool temperature and it helps to extend the tip life: Work mode: Lift tool from the stand and the tool tip heats up to the selected temperature. Hibernation mode: When you place the tool in the stand, the power cuts off and the tool cools down to room temperature. *The tips of this station have such a small mass that temperature recovery is almost instantaneous. So the station goes into hibernation mode automatically when the tool is placed in the stand, without going into sleep mode. Temp
T work
Work
Hibernation
T amb Tool in the stand Heat management increase tip life which reduces cost of ownership.
6
Work
2 sec.
Time
CONTROL SCREEN Selected temp. 3 5 0 o C
350 c 0
Tip temperature
Power 10%
% Instant power supplied to the tool
Decrease & move down
Access Menu & Confirm Selection
Increase & move up
SETTINGS MENU
Main menu
ORIGINAL PIN: 0105
Station settings
Back
Exit Reset settings Station settings Tool settings
4 5
Counters Program version
Counters
Tool settings
1 Temp unit Celsius 2 Maximum temp 4000C 3 Minimum temp 2000C 4 Help text OFF 5 Beep 6 Change PIN
1 2 3
ON
1 Fix one temp 2 Temp levels set 3 Sleep delay Port 1
----OFF 0 min
Tool NT105
4 Sleep temp 1800C 5 Hibernation delay 30 min 6 Temp adjust O OC Port 1
Back
Tool NT105
1 2 3
Plugged hours Working hours Sleep hours
0 0 0
Port 1/2 4 Hibernation hours 5 No tool hours 6 Sleep cycles Port 1/2
0 0 0
Back
7
TECHNICAL SPECIFICATIONS - - - - - - - - - -
Temperature selection from 90°C (190°F) to 400°C (752°F) (±5%). Output Peak Power: 12W. Safety transformer, mains separator and double isolation. NA-2B 230V 50/60Hz. Input fuse: 0,2A. Output: 7,5V. NA-1B 120V 50/60Hz. Input fuse: 0,5A. Output: 7,5V. NA-9B 100V 50/60Hz. Input fuse: 0,5A. Output: 7,5V. Total weight of unit: 1,8 kg (4,0 lb). Complies with CE standards on electrical safety, electromagnetic compatibility and ESD protected housing “skin effect”. RoHS compliant. Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be thrown in the garbage.
WARRANTY JBC’s 2 years warranty guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and all necessary labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased enclosing this fully filled in, sheet.
SERIAL Nº
STAMP OF DEALER
www.jbctools.com
0011844-0513
DATE OF PURCHASE