AUTOMOTIVE  SOLUTIONS Planning and equipment concepts for dealers, importers and workshops
Automotive Solutions
Contents
Systems and solutions for automotive sales All activities in the automotive industry revolve around the small and large scale requirements of everyday traffic. Whether it’s for a car, HGV, van, motorbike, or any other mode of transport. SSI SCHAEFER offers intelligent systems and concepts to achieve a sustainable efficiency increase, experience practice-oriented solutions to reduce costs and custom components all from one source.
As a manufacturer, SSI SCHAEFER has been acquiring both technical know-how and future-oriented organisational expertise in the automotive industry for many years; because markets continue to change at an ever-greater pace. Customers and continually changing internal requirements are creating new challenges in terms of in-house organisation and flexibility. Therefore, the objective must be to increase the efficiency of the company by restructuring various processes.
Planning concepts and planning support Organisational structure in the warehouse Warehouse re-organisation Locator systems Relocation planning
R 3000 Modular Shelving System Multi-tier installations Railings and pallet drop areas Stairs and rails Lighting installations Goods lift with experienced lift staff
Warehouse systems for parts storage Small and very small parts Medium-sized and shrink-wrapped parts Bulky parts Special parts Night-time delivery and incoming goods Counter and drawer cabinet combinations
Warehouse systems for wheel and tyre logistics Customer tyre storage – Operation variants compared Fixed tyre storage, 1-tier Stationary tyre storage, multi-tier using R 3000 system platform equipment Mobile racking systems
Workshop and production equipment Hazardous goods storage Repair workshop Functional cabinets Equipment for break rooms
2
Page 4 6 8 12 13
Page 14 18 20 21 22 23
Page 24 26 28 30 32 34 36
Page 38 40 41 42 44
Page 46 48 52 54 55
Furniture and equipment for offices and reception areas
Page 57
Reference projects
Page 62
SSI SCHAEFER-Group
Page 70
3
Planning concepts and planning support
Automotive Solutions
Planning conceps and planning support If you want to acquire and retain new customers, you need to offer good service and complete service tasks quickly and seamlessly. Warehouse organisation plays a key role here. Success comes from utilising logistics concepts that are developed with service-orientation in mind and have customer loyalty as the goal. SSI SCHAEFER has been a partner of the automotive industry for many years and has developed countless practical, customised solutions. The comprehensive range of marketoriented products and services provides total logistics solutions that are tailored precisely to the customer‘s requirements; flexible, efficient and cost-effective. Schaefer offers the latest production processes for in-house production plants including unrivalled depth and added value offers for safety and reliability.
4
5
Planning concepts and planning support
Automotive Solutions
Comparison: Organisational principles in the warehouse Numerical and group-numerical storage
Comparison: Organisational principles in the warehouse Locator technology – compact storage concepts
Example: Search by part number Schematic display of the search results by the exact part number (similar to the search in archives arranged alphabetically). No direct addressing of the individual storage location possible.
Customer sales
E Long learning curve to understand the system E Access by trained personnel only E Low storage compression E Large space reserves required (up to 40 %) E Storage not affected by size similarity E Long routes and access times E Storage not affected by turnover frequency E Poor overview E High personnel costs
Incoming/ outgoing goods
Incoming/ outgoing goods
Long routes
Group-numerical storage simply organised – meeting high space requirements
6
Customer sales
Fast-moving articles
Slow moving articles
Optimised routes
Outgoing workshop goods
Numerical and group-numerical storage All articles are stored by part number and not affected by turnover frequency in the IT system.
... location storage for fast and slow moving articles Outgoing workshop goods
From numerical storage ...
Location storage The most effective system for warehousing is locator technology. In this case, the warehouse is divided into coordinates. The articles are entered into the IT system with details of the storage location and managed according to turnover frequency. E Simple to understand storage E High storage compression E Increase in storage capacity E Short routes and access times E Faster storage and retrieval E Possible to use temporary staff E Reduction in personnel costs E Storage acccording to fast and slow turnover speed E Storage based on evenness of size E Storage based on turnover frequency E Storage based on ergonomics E Relocation not necessary if the part number changes E Short refinancing times
Example: Locator number 02B01A 02 = shelving row 2 B = shelf B 01 = modular shelf number 1 (1st from bottom) A = bay A in compartment
Storage by locator technology – volume-compressed and compact
7
Planning concepts and planning support
Automotive Solutions
Warehouse reorganisation – from numbered groups to locator technology Practical example: Parts storage in a car dealership
Warehouse reorganisation – from numbered groups to locator technology Practical example: Parts storage in a car dealership
Current status 2-tier racking system
Reorganisation – Step 3 Goods issue counter with drawer units for 1100 parts.
The warehouse is comprised of a two-tier racking system with a base area of approx. 350 m2 without wheel and tyre storage. The storage space roughly corresponds to dealer profile I: Sales of 1000 new vehicles per year.
When using drawers and storage trays in 400 and 600 mm deep shelves, approximately 50 % less area is required in the small and medium-sized parts area in comparison to previous storage systems.
Reorganisation – Step 1
Reorganisation – Step 4
Conversion to locator technology
Maximum utilization of reserve space with SSI SCHAEFER mobile racking systems – only on the ground floor.
Reduction of approx. 30 % of the shelving units
Growth in capacity of the parts warehouse of over 80 %. Free space still available for order picking or special offer goods. Platform space of 350 m2 optionally possible for additional supply from the customer wheels warehouse.
The SSI SCHAEFER compact storage principle – your investment for a future-proof solution Potential saving – order picking time: 30 - 50 % Reorganisation – Step 2
Analysis of the entire, physical parts installation at 100 %
Reorganisation of the shelving layout
EVERY individual part is assigned to a permanent storage location
Display of free space
SSI SCHAEFER transfers a fully operational warehouse system – ALL storage locations are marked The marking system matches the existing number key at your company – optimal connection to the goods management system Reorganisation possible without interrupting operation The system can be transferred to new parts areas to in-house management – no additional planning costs New storage locations can be assigned in-house
8
9
Planning concepts and planning support
Automotive Solutions
The traditional solution
The future-proof solution
The 3-tier racking installation in a numerically grouped warehouse installation
The SSI SCHAEFER compact warehouse; maximum performance based on optimal warehouse compression
Storage of
Storage of
parts
parts
8.500
8.500
Performance comparison of both storage organisation modules – planning example
The basis for calculating the space utilisation index is the 3-tier system
The 3-tier system in numerically grouped warehouse organisation
Space requirements – basic area Overall height Stored items Expansion reserve
59 m2 7.000 mm 8.500 items None
Items / basic space requirements Space utilisation index
144,1 100 %
Compact warehouse on one storey with expansion reserves 42 m2 2.500 mm 8.500 items 2. level (platform) 202,4 140 %
10
Implemented expansion option: Compact warehouse on 2 levels 53 m2 5.500 mm 17.000 items maximum used
320,8 220 % 11
Planning concepts and planning support
Automotive Solutions
Relocation – Theory and Practice
The SSI SCHAEFER Locator System: Fast – Safe – Reliable The 4 step concept Step 1: Concept study as a decision-making tool Supported by software developed in-house specifically for the concept study, SSI SCHAEFER used known parts data and features to determine the actual space requirements for the parts warehouse equipment. This means that the equipment proposed for the new warehouse was developed taking into account all functional requirements. The customer benefits from many years of experience offered by the specialist intralogistics company. SSI SCHAEFER also included the procedural framework, staff deployment and the necessary implementation costs in the concept study. This provided the necessary security during the planning phase. Step 2: Intralogistics – detailed planning Taking into account the current and planned parts quantities, the spare parts are assigned to a permanent storage location. The assignment takes into account all special features as well as the relocation data for the parts. Special customer requirements were included in this process. The detailed planning process formed the basis for implementation and the foundation for the warehouse relocation. Step 3: Complete package – implementation The warehouse to be supplied and equipped as part of the carefully agreed to building schedule by SSI SCHAEFER without any intervention by the customer, set up ready for operation, with labels and signage ready for start-up and handed over on time. Step 4: Relocation planning and support A relocation represents a particular challenge. SSI SCHAEFER provides the necessary support. Relocation planning and support includes pre-sorted relocation lists and labels, SSI SCHAEFER reusable transport containers as well as other means of transport, and relocation support for on-site staff.
Location planning is used as the basis for relocation Nothing is left to chance in this process. The removal of parts is pre-determined, as is the transport equipment and subsequent storage location. Reusable transport containers from SSI SCHAEFER are ideally suited for use here as transport equipment. The practical implementation of the relocation process is carried out with computer support. This makes it possible to respond to any modifications that become necessary. Removable relocation labels accompany the small and medium-sized parts to their new compartment and help to locate the parts during the start-up phase. The labels can be removed later so that only the actual compartment identification remains.
12
13
Automotive Solutions
R 3000 Modular Shelving System
R 3000 Modular Shelving System R 3000 − the flexible modular shelving system for all storage applications for small parts, medium-sized parts and bulky goods storage. A particularly strong shelving frame design reliable for bay loads of max. 5000 kg permits the use of an up to 4-tier shelf-supported mezzanine installation up to 10 m in height. Due to the wide range of combinations for steel plate shelves in 5 depths and 2 bay lengths, cross beam solutions for bulky goods storage as well as wheel and tyre storage, the R 3000 is an extremely flexible system that is complemented by a wide range of accessories. Here, shelf supported installations solutions have been successfully used for supporting structures shaped in-house, at an economical cost. From traditional spare parts warehousing in car dealerships to equipment in car parts dealers to diverse organisational structures and processes in logistics centres for replenishment, SSI SCHAEFER is recognized worldwide for custom solutions offering maximum efficiency regardless of complexity.
14
15
i
Automotive Solutions
R 3000 Modular Shelving System
Bolt-free design for rapid assembly
Bay lengths 994 and 1282 mm, shelving depths 300, 400, 500, 600 and 800 mm, different heights for single-tier and multi-tier designs
Storage of Small and Medium-sized Parts
Frame profile/lug spacing
The slot and lug spacing of the uprights allows R 3000 to be flexibly configured using an extensive range of accessories in system pitch of 53 : 53 mm
Bulky Goods Storage
1.313 Axle size 1.282 Clear bay width
Dimensions in mm
31
Extension bay
The storage of large and bulky parts, e.g. wings, exhaust systems, bumpers or glass panels, requires shelving that accommodates the shape and size of these parts. We offer 2 shelving depths and heights, plus a wide range of accessories. The all-round enclosed upright with the new, multi-variable boltfree system, permits the crosswise suspension of both faces. A bridging crossbeam can be used between 2 shelving bays, as well as within the upright frames, to ensure the optimum storage of shaped parts.
53
Starter bay
60
1.344
High load-bearing capacity up to max. 5000 kg per bay
The shelving structure, and subsequent expansions during ongoing operations such as disassembly work, can be completed easily and quickly.
Multi-tier installations
with the corresponding pre-planning can be retrofitted
End cap Back panel
With SSI SCHAEFER shelves, the end section is firmly fitted against the upright post. In conjunction with spot welding, this makes the shelves particularly strong and resistant to twisting, thus ensuring complete stability.
Garment rail set
KTRZ-cross beam
Cross beams
Full height dividers
S-hook
End cap Rod-adjustment
Shelves
• • • •
Label holder with label
Upright frames
Steel plate, painted silver or galvanised 30 or 40 mm high For dividing the shelving bays into varying heights Slots for inserting separating panels, slot spacing 41 mm
Hanging rail
Dividing rods
Bridging cross beam Side panels Exhaust pipe holder Bin front Single-edge base with 6-compartment longitudinal section = N version
Storage trays
Shelf Uprights with lugs Rod covers
Exhaust shelf Drawers
Timber decking panel
Wing doors
16
Free-standing divider
Protective Terodaem coating
Double-edge base with 10-compartment longitudinal section = V version
Free-standing divider
Uniset
Steel decking panels 17
Automotive Solutions
R 3000 Modular Shelving System
Outline sketch of freestanding and shelf-bearing system platforms
Multi-tier Installations
2nd platform tier Shelf platform and 1st platform tier
Covered shelf platform in the parts sales and workshop goods issue area
Concepts including multi-tier systems are designed for all storage applications. Small and very small parts, large and bulky parts, mediumsized parts and shrink-wrapped goods are housed in specific storage locations using minimum space and optimal access with the shortest possible routes. Storage facilities from SSI SCHAEFER for multi-tier systems take into account turnover frequency and ease of handling to make processes as efficient as possible.
Shelving for tyres
Freestanding platform in goods-in
Ground floor
Shelving for bulky items
Fixed modular shelving
Shelving for wheel rims
Mobile shelving systems
1st Mezzanine floor FFL 2.310
2nd Mezzanine floor FFL 4.589
1st Mezzanine floor FFL 2.310
4.557
2nd Mezzanine floor FFL 4.589
6.836
9.115
3rd Mezzanine floor FFL 6.868
1st Mezzanine floor FFL 2.310
Modular shelving system
Prefabricated uprights are supplied in different heights for single-tier or multi-tier designs. They are assembled on-site and securely fixed using shelves or horizontal beams and cross braces. A standard mezzanine height of 2310 mm with a decking thickness of 30 mm is designed to provide sufficient headroom even after the installation of sprinklers, air conditioning and lighting, etc.
Modular shelving system with fullheight uprights
The shelving bays can be designed using shelves and horizontal beams of 994 and 1282 mm in length. The mezzanine height can be selected in pitch intervals of 26.5 and 53 mm. Railing gate Stairs 18
19
Automotive Solutions
R 3000 Modular Shelving System
Platform Technology – Railings and Pallet Drop Areas
Stairs and rails
E P latform rails are designed to be extremely sturdy and are always equipped with handrails, guardrails and lower sheet metal mantle E Transfer positions and safety chains are based on recommendations by professional trade associations E Sliding gates are only installed for infrequently used pallet drop areas E Railing door systems offer optimal personal safety when transporting goods. The rail is closed in front or in the back according to the transport route. Painted RAL 1018 zinc yellow E Standard widths with folding and sliding gates 1500 / 2000 mm E Surface painted silver, partially galvanised. Special colours available
Standard stairs for multi-tier shelving installations permit safe and easy passage and are extremely sturdy. The requirements according to DIN 24 530 (stairs made from steel) are to be noted. All steps are equipped with side panels from the stair case and bolted into them. Depending upon platform height, additional stairway landings are necessary. Two different stair models are used according to individual requirements and the availability of space. E S teps made from checker plate or mesh panel available E All stairs are equipped with hand rails E R ailings carefully designed down to the smallest detail including the transition from stairway rail to platform rail E S urface painted silver, partially galvanised. Special colours available on request
Railings and pallet drop areas
20
Standard stairs for multi-tier shelving installations
21
Automotive Solutions
R 3000 Modular Shelving System
Goods Lift with Trained Lift Staff
Lighting installation Guidelines based on regulation BGR 234 (formerly ZH 1/428): “All storage installations are to be equipped with sufficient and glare-free lighting. The lighting installations must be designed and arranged so that they are protected against mechanical damage. The nominal lighting strength of the general lighting should be at least 100 Lux at a height above the floor of 0.85 m. For more intensive tasks by sight, e.g. for small parts warehouses and reading tasks, the nominal lighting strength should be at least 200 Lux. Light and heat sensitive warehoused goods can necessitate other measures.”
Aluminum cable condult Floor beam profile Light fixture
SSI SCHAEFER has created a special lighting range that meets the nominal light strengths without glare required by the workshop guidelines in all areas of the shelving platform equipment.
Integrated into the platform equipment, goods lifts simplify operations of the system and provide unrestricted access to all warehouse areas. Loads of up to 2000 kg can be conveyed.
E T he lights are integrated into the support structure of the platform level and are therefore largely protected against impact damage
Due to stable, freestanding frame construction in a compact design, the space requirements are low and can be used virtually anywhere, including in retrofits. The modular system ensures short delivery times and problem-free assembly onsite without cutting or welding work.
E A ssembly opposite to the aisle direction to create unobstructed area in front of the highest shelf, with clear view of the stored material for personnel
2 to 6 stops can be set up and equipped with up to 12 access points. Operation is carried out with a call and receive control station from outside. In the lift car there is an operating panel equipped with a key-operated switch that deactivates the external control station. The internal operation has a “deadman button” design.
E A ll support profiles in the middle aisles are prepared for the installation of commercial cable conduit PG 9/1 or other installation material. SSI SCHAEFER uses only compensated lighting
The lift shuttle doors conform to the fire protection regulations according to DIN 18 090 Safety components permit installation.
E E mergency and reference lighting according to VDE 0108 and DIN 4844 and DIN 5035 Part 5, is available and can be installed on request
In addition to the basic design, a version is available where a trained person accompanies the loaded goods. This means that the lift operator can save time and unnecessary routes.
Clip
The goods lift is EC-type tested in accordance with Machinery Directive 98/37/EC Appendix VI, by the Munich TÜV with the construction type test certificate number EC 427530.
Leuchtentrageprofil, vorbereitet für Verkabelungsmaterial Fluorescent tube Plastic protection
B/2 + 300
2.600
930
600
700 minimum clearance space
2.000
Technical data The stable, freestanding frame construction has very low space requirements due to its compact design with 2 to 6 stops and up to 12 access points and one or two wing lift shuttle doors. The safety components permit installation above areas accessed by persons below.
The lift can be used in temperatures to -28° C as an option. Special sizes on request.
Pit
Conveyor height 2
Cover hole t + 170 mm
Conveyor height 1
Load: 500 kg, 980 kg, 1.500 kg, 2.000 kg
Cover hole b + 430 mm
Door height = lift car height
Lift car dimensions: Lift car width “b” of 1.000 mm to 2.400 mm Lift car depth “t” of 1.060 mm to 2.860 mm Lift car height “h” of 2.000 mm to 2.500 mm
2.000
Conveying height: up to 12.000 mm (for the basic design without trained additional personnel - special heights are available.
Total height
Operating speed: up to 0,22 m/s
Grube
23
Automotive Solutions
Warehouse Systems for Parts Storage
Warehouse Systems for Parts Storage Maximum storage density in the small parts area is so cleverly combined using system-integrated variability and the largest possible flexibility with the bulky parts warehouse, that the challenges created by trends towards multi-brand strategy and the significant increase in product range and variety among automobile manufacturers can be met. SSI SCHAEFER provides a comprehensive product range of special accessories for the specific requirements in the parts trade: Containers with various divider options can be used in the drawer-based concept due to compatible system dimensions thus increasing clarity and order picking speed in the warehouse. The integration of heavy-duty drawers with dividers compresses the number of parts close to the service counter and improves the processes and speed. A highly flexible solution to store bulky and large items are steel plate storage trays. They can be moved as complete units in the drawer on the racking and if necessary, can be easily removed from the compartment. Special designs for easy to manage, high density storage of large volumes of bulky parts are simple to create using variations of the comprehensive standard range, and on request, are available quickly. 24
25
Automotive Solutions
Warehouse Systems for Parts Storage
Storage of Small and Very Small Parts Shelf containers For maximum use of storage space, containers of different sizes can be used for small parts. To do this, use of shelf depth is maximized by inserting dividers. The dimensions of the shelf containers are tailored precisely to the shelving systems. This ensures that no valuable storage space is lost both in terms of shelf width and shelf height. Labelling options for all compartments and the drawer-based principle of shelf containers are standard for these systems. The shelf containers are available in steel, polypropylene or polystyrene with labelling and divider options (of great benefit in large and small warehouses). Conductive models on request.
Storage trays and insert boxes Another option for storing small parts and bulky goods is offered using steel plate storage trays that can be divided multiple times width-wise using dividers. The storage trays are placed on the shelves or support profiles, which are also located on upright lugs.
SSI SCHAEFER insert boxes made from plastic are ideal for the storage of very small parts. Various sizes are available: 100 % of the space in the drawers is used.
26
27
Warehouse Systems for Parts Storage
Automotive Solutions
30 341
Medium-sized and shrink-wrapped parts are stored exclusively on shelves. The shelves can be positioned and adjusted at a distance of 53 : 53 mm on both sides of the shelf without bolts. Enclosed box profiles on both lengthwise sides ensure optimal torsional rigidity of the shelves.
175
Shelving using dividers
100
275
Storage of Medium-sized and Shrink-wrapped Parts
500
For division with dividers, the shelves are slotted at a spacing of 41 mm. Here you have the option to use freestanding and continuous dividers in different sizes.
Shelves with bin fronts For bulky goods, bin fronts in different heights are available. The use of rear wall and side wall grilles is also possible.
28
Dimensions in mm
300 400 500 600 800
29
Warehouse Systems for Parts Storage
Automotive Solutions
Storage of Bulky Items
SSI SCHAEFER R3000 shelving also offers the right system for storing bulky parts. Whether it is engine covers, doors, bumpers, etc.; the right solution for everything is available. Storage is carried out primarily on cross beams that can be positioned and adjusted without bolts in a grid pattern of 53 : 53 mm. Adjustment, even for difficult part positions, is standard. To divide or separate individual bodywork parts, cross beams to house horizontal beams and to house divider rods or bodywork parts, clamps are available. A metal-protective Terodaem insert is also included in the product range. Shelves for storing discs, wheels and rims complete the range.
30
31
Automotive Solutions
Storage of Special Parts Components with special geometry/suspended storage SSI SCHAEFER designs and supplies individual shelving systems for storing special parts. Whether pallets, special containers, jointed shafts, spring bars, etc.; for every item that needs to be stored, we find the right storage location to provide optimal support for modern IT-controlled warehouse management. As a system manufacturer we offer many advantages that pay dividends to our customers from planning to on-site implementation. There are numerous items for which suspended storage is specified by the manufacturers for technical reasons. To achieve this, SSI SCHAEFER created the ideal solution from the variety of existing systems. We would be pleased to meet with you regarding your individual logistical and technical warehousing requirements and to develop practical and application-specific solutions. Let us take on your challenge!
32
Warehouse Systems for Parts Storage
Warehouse Systems for Parts Storage
Automotive Solutions
Night-time Delivery and Incoming Goods Space in the incoming goods area is absolutely essential for a functional warehouse. This is the only way to ensure that larger incoming orders can be temporarily stored and processed easily. Warehouses with a large number of orders require an outgoing goods area with online shelving etc. The reduction in waiting times is the basis for 100 % service orientation and customer satisfaction. To do this, your incoming goods must be operational virtually 24 hours a day, offering the flexibility of night-time deliveries.
Dividers for night-time delivery, consisting of structural steel mesh with one or two wing door or sliding door sets are part of our product range.
The integrated night-time delivery functions as a central incoming goods area during the day with potential handover to the mezzanine level. With platform systems, an incoming goods option for the individual shelving levels is available. Here you have the choice between two-wing door sets, sliding rails or a railing gate. For inside storage of goods in the individual platform levels, various options are used, such as forklifts or simplified goods lifts. Here, too, SSI SCHAEFER provides total solutions from one single source. Space-saving, mesh gate sections can also be designed as cascade-type, movable mesh elements on request.
35
Automotive Solutions
Warehouse Systems for Parts Storage
Counter and Drawer Cabinet Combinations The requirements for a highly flexible and dynamic parts supply system in service operations, as well as supply in the traditional spare parts supply business are increasingly determined by shorter lead times. At the same time, comprehensive ranges with widely differing turnover frequency levels with as short order picking and travel times as possible need to be ensured to meet financial considerations. SSI SCHAEFER offers integrated counter systems and drawer unit modules which provide a very high storage compression level and availability in close proximity. In addition to a robust and functional standard design, the counter surface can be optimally customised using individual selection of worktop materials and shapes. The full integration of screen workstations is also possible as is the positioning of the counter system within a multi-tier SSI SCHAEFER platform system.
36
37
Automotive Solutions
Warehouse Systems for Wheel and Tyre Logistics
Warehouse Systems for Wheel and Tyre Logistics Car dealerships and car showrooms are increasingly relying on total service concepts to offer their customers added value and maintain regular contact with the operation. Included here are services such as the inside storage of the customers‘ tyres and wheel rims. SSI SCHAEFER offers a variety of solutions for wheel and tyre logistics that is unique to the industry: both fixed systems on ground level or multi-tier platform design incl. the necessary supply and disposal systems as well as mobile solutions based on manually operated mobile racking systems, either on ground level or on 2 levels with integrated steel platform. The flexibility in combining the R 3000 racking system also permits the implementation of double depth inside storage strategies as well as operation using electrically driven shelfservicing devices. All relevant components for this equipment are manufactured in-house. A variety of reference systems offer clear testimony − SSI SCHAEFER develops the most cost effective and technically advanced system for you based on your specific usage and operation scenario.
38
39
Warehouse Systems for Wheel and Tyre Logistics
Automotive Solutions
Fixed Tyre Storage, 1-tier Wheel rim racking
Storing tyres and wheel rims has never been so easy and practical.
400 mm
400 mm
300 mm
Tyre racking
Four bay widths, three shelving heights and the option of turning single bay shelving into double bay shelving, or vice versa, at any time, clearly demonstrate the inherent flexibility of this system.
2.278 mm
The specially shaped horizontal beams for tyres and wheel rims are simply suspended on the prefabricated upright frames without using bolts. They are also designed to reinforce the shelving bay. The individual levels can be adjusted at any time in increments of 53 mm. In this way heights can be adjusted to fit the size of the tyres and wheel rims. At the same time there is the option to mount shelves in the holder lugs to fully exploit the functional features of the shelving.
Customer Tyre Storage – Operational Variants Compared With conventional warehousing, fixed shelving is used with a service aisle located between each shelf. This takes up valuable storage space. This is why mobile racking is more cost-effective in the long term. With mobile racking technology, only one single operation is required. The shelving units are positioned on carriages and the aisles are created as required simply by repositioning them. An increase in valuable storage capacity of up to 85 % for single-tier installations and over 100 % for multi-tier installations can be achieved with this method.
31 mm
Tyre and wheel rim cross beams Tyres and wheel rims are carefully stored on specially designed SSI SCHAEFER horizontal beam profiles
Fixed shelving system
Guide rails
Fixed plinth with double units
Service aisle min. 750 mm
Service aisle
Fixed plinth with double units
Service aisle
Fixed plinth with single units
Room depth
Mobile base with double units
Mobile base with double units
Service aisle
Trace spacing Trace spacing
Shelf width
Main aisle
Stopper Main aisle
Plinth width
Mobile base width
min. 750 mm
Mobile base width
Room width
40
Mobile base width
Main aisle
140
540
Mobile base with double units
Fixed plinth with single units
Room depth Plinth and mobile base length
The work loads placed on employees when moving loads in ergonomically far less favourable positions need to be taken into consideration when choosing a double depth solution.
Starter bay 994 oder 1.282 mm
Frame connectors
540
min. 140 max. 180
Mobile shelving system
SSI SCHAEFER prefers and recommends direct, permanent access to every wheel set. Double depth inward storage concepts can be implemented easily using the system, but are subject to the system-dependent limitations in terms of the access to the lower and upper storage levels in the racking.
Extension bay 994 oder 1.282 mm
Main aisle
Shelf width
min. 750 mm
Shelf width
min. 750 mm
Room width
41
Warehouse Systems for Wheel and Tyre Logistics
Automotive Solutions
Fixed Tyre Storage, Multi-tier with R 3000 System Platform Equipment There are many concepts for wheel and tyre logistics; even today most companies decide in favour of traditional, multi-tier shelfsupported platform systems. The most important advantages of this concept are: E e specially cost-effective design with strong, shaped steel plate components made in series production E p ermanent and direct access to each storage compartment and every tyre set E p arallel access on multiple levels permits the optimal response to peak load times E O n request additional storage density can be achieved based on double depth inside storage, meaning that the ease of use of this solution is reduced due to the nature of the system
In combination with intelligent solutions for vertical transport, up to 4-tier racking systems are possible offering maximum storage capacity, where the individual performance requirements of the specific project are always the main focus in choosing the best solution: E s implified goods lift with or without an accompanying person in the lift car E hoisting equipment with open hoisting platform E t ransfer stations on every platform tier with secured transfer positions for vertical transport via forklift Customised requirements can be easily implemented by SSI SCHAEFER; including on covered asphalt surfaces. The installation of multi-tier solutions is possible with a sufficiently stable base, such as a former car park, and has been implemented in practise many times.
42
43
Warehouse Systems for Wheel and Tyre Logistics
Automotive Solutions
Mobile Racking System, Ground Level Mobile solutions that can be moved via crank drive are required when the maximum volume usage possible in terms of technology has the highest possible priority. All the benefits of permanent and direct access to every storage compartment and every tyre set are retained with this solution. Due to higher investment costs, the costeffectiveness of this solution is greatly dependent on customised and optimised layout planning. Benefits of a ground level mobile racking system: E t he most cost-effective solution for maximum storage compression E t he car with special SSI SCHAEFER undercarriage does not require any running rails on a sufficiently stable base and can be used directly on the existing floor E a flat guide profile screwed onto the base on the rear of the racking ensures perfect functioning and in the event of the relocation of the system can be easily dismantled by the customer and re-constructed at the new location
Mobile Racking System, 2-tier on Freestanding Steel Platform The solution for maximum storage compression and space utilisation including height. On the mezzanine, the cars run at the same height on the steel rails integrated into the mezzanine construction. E l arge block loads made from multiple cars can also move on the platform using just one car and speed up access times E a s the maximum expansion levels, up to 5 storage levels can be implemented on top of one another, (with integrated anti-tilt protection in the rail system), the operation can then be carried out using only a special control device E a n often used combination is setting up a volume-compressed parts store on the ground tier in accordance with the SSI SCHAEFER compact warehouse principle, and highly compressed use of the top tier with a mobile racking system for wheels and tyres E t he steel platform for this challenging combination optimized in terms of design and engineering is also manufactured in-house by SSI SCHAEFER E o ur mobile racking systems are maintenance-free and only require a minimal amount of maintenance that should typically consists of rails and drive components to protect against excessive contamination 44
45
Automotive Solutions
Workshop and Production Equipment
Workshop and Production Equipment The volumes of flammable liquids and other hazardous substances found in commercial operations that need to be stored as close as possible to the workstation are significant and are increasing continually. To meet this need, we offer equipment that provides optimal protection for your warehouse. Efficient processes, organisation and flexibility form the basis of an efficient workshop, where quality and quantity are critical. SSI SCHAEFER has spent years developing a wealth of options in the workplace to support professional people in their daily work. From workstation systems to functional cabinets, from tool to machinery cabinets including social areas – our practical equipment and fittings offer a systematic way of working.
46
47
Workshop and Production Equipment
Automotive Solutions
Safe Hazardous Substance Storage – a Hot Topic
Improper Storage and the Consequences
The safe handling of hazardous substances is one of the most important tasks in protecting the health of employees in the company.
Companies that do not store their hazardous substances correctly must deal with the following situations: E They might be breaking valid laws (BetrSichV/TRbF, GefStoffV, WHG, TRGS (Technical Rules for Hazardous Substances) 526)
The employer has a wide range of obligations. He is required to determine the hazard potential of the substances used, as well as the working practices used, and take appropriate measures to protect persons against health risks and the environment against substance-related damage.
E In the event of an accident, insurance coverage may not be provided E Personal liability of the company owner for any damages or injuries E There may be significant costs involved in disposal and renovation E Incalculable production failures in disposal and/or the event of damage
An important part of these safety measures is the correct storage of hazardous substances. SSI SCHAEFER storage systems represent the state-of-the-art in terms of technology and thus form a reliable component in your company‘s safety concept.
E The resulting damage to a company’s image could last a long time E You could be neglecting your responsibilities to your customers and employees
Transport of hazardous goods 73,6 % of all transported hazardous goods are flammable liquids. Substances that are transported also need to be stored. The storage of flammable liquids in the workplace in accordance with TRbF 20 Appendix L in safety cabinets.
other
73,6 % flammable liquids
“Nothing has ever happened here...” The following quantities of flammable liquids can vaporise to form an explosive mixture: 4 drops 2 cl 1 litres
2 cl
500 ml 200 litres 20.000 litres
The three requirements for an ignitable vapour/air mixture: 1. Source of ignition (mechanical spark, electrical spark, chemical reaction, static loading, hot surface, open flame) 2. Flammable substance (gas, liquid, solid) 3. Oxygen
A clear example In a full container the vapour/air mixture is too rich and the content would burn off
48
2 cl (a liqueur glass) of a flammable liquid is enough to generate an explosive atmosphere in an empty 200 l container.
A further condition is the correct mixture ratio between a flammable substance and oxygen.
49
Workshop and Production Equipment
Automotive Solutions
Laws and Regulations (Excerpt) DIN EN 14 470-1 Standard valid Europe-wide for the manufacture of safety cabinets. The primary objective is to minimise the fire risk in connection with the storage of flammable substances and protect the content of the cabinets in the event of a fire. Operational Safety Ordinance (BetrSichV) This regulation, that became effective in 2003, implements multiple European Directives in German law with the objective of consolidating regulations from various existing laws into one single ordinance. This has produced the following: VbF (Verordnung 端ber Lagerung und Abf端llen brennbarer Fl端ssigkeiten; Ordinance on the Storage and Filling of Flammable Liquids) has been rescinded. Technical regulations continue to apply until new regulations are approved, re-classification of hazard categories, duty of disclosure not required, hazard assessment assigned a greater significance, company responsibility increased (liability risk). Technical ruling for flammable liquids (TRbF 20) Regulates the safe handling of flammable liquids. Appendix L, point 1.1, defines safety cabinets as special equipment:
Water Ecology Act (Wasserhaushaltsgesetz; WHG Containers in which flammable liquids or liquids harmful to water are stored, must be secured against leaks using suitable collecting containers to protect the groundwater. Water Hazard Class (Wassergef辰hrdungsklassen; WGK) Hazardous substances are divided into 3 water hazard classes (WGK): 1 E Minor hazard to water 2 E Hazard to water 3 E Serious hazard to water Steel Container Directive (Stahlwannenrichtlinie; Stawa-R) Containers made from steel must be constructed and tested in line with the technical regulations of the Steel Container Directive). The previous type test is replaced by the declaration of compliance from the manufacturer. Declaration of Compliance Declaration of compliance from the manufacturer following advance test.
... ... they are used to store flammable liquids in enclosed containers. 50
51
Workshop and Production Equipment
Automotive Solutions
Repair Workshop
Wherever where high quality components are repaired, every action of the engineers must be perfectly implemented. The essential requirements for this is workshop equipment that ensures optimal operation and meets all requirements in terms of clarity, access and efficiency. The workshop areas set up by SSI SCHAEFER meet these requirements.
52
53
Workshop and Production Equipment
Automotive Solutions
Functional Cabinets Regardless of whether you are storing large or small objects, we offer functional cabinets to suit every purpose. In workshops and in industry, SSI SCHAEFER cabinet systems have proved themselves a thousand times over. This flexible equipment has a modular structure. Drawers, vertical shelves on telescopic rails with perforated panels that can be used on both sides to hang tools or simply separating shelves fitted with semi-open fronted containers – systems that are commonly regarded as indispensable. The SSI SCHAEFER cabinet range is logical, versatile and wide-ranging. A state of the art design that meets everyday needs.
Equipment for Break Rooms No workshop is complete without well-equipped changing rooms and common rooms. This is where employees can change clothing and safely store their personal belongings. All SSI SCHAEFER locker columns and wardrobes can be quickly installed without structural alterations and extended as required at any time. Their extraordinary versatility offers both individuality and enormous space saving. For example, up to 20 lockers can be housed on little more than a metre‘s length of space. Visual appearance is very important in lobby and wardrobe areas. In this regard SSI SCHAEFER offers a wide range of designs. Lockers are thoughtfully equipped, manufactured from high-grade sheet metal and available in a variety of finishes. An impressive solution to the most demanding requirements in terms of visual appearance, fittings and security.
54
55
Automotive Solutions
Furniture and Equipment for Offices and Reception Areas
Furniture and Equipment for Offices and Reception Areas First impressions count – this applies both to people and to sales areas. An appealing appearance and a friendly atmosphere have exactly the same result as a smile; they exude charm, warmth and well-being A brief conversation regarding an enquiry or an extended pre-sales discussion; equipment that conveys a pleasant atmosphere makes communication easier. When it comes to attractively designed reception desks, meeting rooms, workstations and office equipment, SSI SCHAEFER offers design freedom in every respect. Timeless design, high quality materials and a variety of colours fulfil every requirement. Systems are designed and constructed based on ergonomic principles, are of sturdy construction and meet the requirements of EU health and safety regulations and workstation guidelines. Our high quality office furniture systems are supplemented by a comprehensive service offering. Make use of our extensive experience on-site, individual room planning and workstation design services and complete assembly service by specially trained staff.
56
57
Automotive Solutions
Bench Systems
Furniture and Equipment for Offices and Reception Areas
Planning
SSI SCHAEFER Desk Systems combine contemporary, functional and ergonomic designs with high quality construction and outstanding value for the money. At the very heart of our product range are various desk systems, each of which has its own base design. A number of these are available with coloured side panel inserts which add a uniquely attractive touch to the design. A range of conference tables and containers, all available in a host of colours and options, provide the perfect finishing touches to the system.
58
Make use of our individual room planning and workstation design services and complete assembly service by specially trained staff. We will be happy to advise.
59
Furniture and Equipment for Offices and Reception Areas
Automotive Solutions
Reception and Sales In the service areas the emphasis is on functionality and maintaining smooth-running processes as well as correspondingly modern designs that provide long-lasting, positive impressions. Design options offered by SSI SCHAEFER for reception and sales areas convey to the customer an impression of reliability and a quality oriented organisation right from the start.
Sitting and Waiting We have the ideal seating for every work environment and activity. Whether its a manager‘s chair, typist’s chair, conference or meeting room chairs or lounge area seating; SSI SCHAEFER offers a wide range of comfortable and user-friendly seating to meet every need. This is not just because they look good. E A s anyone who has spent long periods of time at a desk will tell you, it is only possible to maintain concentration on your work if you are sitting comfortably and are able to change your sitting position regularly. E E rgonomically designed seating makes for greater comfort and a sense of well-being, at the same time increasing concentration levels and performance.
Automotive Solutions
Reference Projects
Reference Projects SSI SCHAEFER offers comprehensive solutions to the marketplace based on sturdy shelving designs that have been proven in practice for decades, in combination with platform concepts that make optimum use of space. In addition to the manufacture of high quality system components, our core competence is planning and design, which promotes practically oriented selection and integration of the optimal solutions for the specific tasks. Benefits from decades of experience by our planning specialists designing custom configurations and optimum solutions to meet your specific requirements. This section highlights a current selection of completed projects, where the variety of services, products, know-how and experience offered by SSI SCHAEFER speak for themselves.
63
Automotive Solutions
Reference Projects
“Despite the increased stock, we have been able to virtually double our picking time from 90 to around 160 picks per day using the locator technology, the structured processes and the new warehouse equipment”, confirms Thomas Hurdelhey, Warehouse Manager at the Linde Gabelstapler dealership. The re-design and re-fitting of the new compact warehouse was completed as scheduled within four months following the contract being awarded. The warehouse and the adjacent office areas are bright, clean and clearly laid out. The new office equipment with components from the Schaefer office furniture range such as the Planova desk system, elements from the Tetris cupboard system and the Pilos wall system offer workstations designed and equipped in line with ergonomic principles, and also provides a pleasant working environment. “Optimal utilisation of the space, short routes, faster item access and a flexible warehouse structure – with the same amount of space we have now significantly increased the capacities, the cost-effectiveness and the efficiency of our warehouse thanks to the Locator technology and the new equipment from SSI SCHAEFER”, summarises Hurdelhey. “And all that with a transparent investment and growth reserves for around five years. This means that our objectives have more than been met.”
More Than a Shelving System SSI SCHAEFER succeeded in winning the contract from the Linde dealership Schrader Industriefahrzeuge for the complete design, planning and equipping of a compact warehouse plus office space. Result of the re-design: bright, modern working space, flexible storage system, faster access and improved response times, optimised space utilisation, greater flexibility. Pick volume virtually doubled, preparation for shipping increased by a factor of 10. In Spring 2006, the decision was made to consolidate warehousing and to re-design the Essen-based warehouse completely during ongoing operations. The analysis of the current situation determined around 10.500 items for storage, split up in a parts mixture of 8.800 small and very small parts for drawers, approx. 1.400 medium-sized or shrink-wrapped parts in storage bins or on shelves as well as around 300 large and special parts. After specifying the future spare parts structure and the parts groups, SSI SCHAEFER was then able to start the detailed planning work. In total, the shelving length in the new, almost 2.50 metre high compact warehouse at Schrader covers around 250 metres, filled with the latest racking technology. The warehouse is now equipped for a capacity of 13.100 items. The separate small hazardous goods warehouse is designed in compliance with the requirements of laws and hazardous goods regulations, and meets essential safety standards with the drip trays, for example. The installation of a pre-picking zone with racking system for supply boxes as well as a packing bench for optimal shipping preparation work ensure efficient storage and order picking processes and fast access to the stored goods. 64
65
Automotive Solutions
Reference Projects
Two in One Go – Individual Storage Concepts at Hans Hess Autoteile and Motair Turbolader Hans Hess Autoteile GmbH has expanded its main warehouse in Cologne with a flexible, 3-storey modular shelving system including integrated conveyor technology. At the same time and in the same hall complex, the warehouse of the company‘s subsidiary Motair Turbolader GmbH was implemented with the individual design of a two-storey shelfsupported mezzanine construction. Results: Two intelligent solutions with capacity for growth for a complex, fast growing range of products. Since 1929 the company Hans Hess Autoteile GmbH has been supplying trade and industry clients with high quality spare car parts and replacement parts, as well as other product-specific supplementary products. The company Motair Turbolader GmbH was formed in 1971 to develop small turbocharged aeroplane engines and today is a specialist supplier with a comprehensive product range and a repair shop for all turbocharger brands, as well as a development partner for special applications. The strong growth in turnover and the resultant success of both companies, both of which had hit their limits in terms of capacity, necessitated a new logistics solution that was implemented at the main Hess Group site in Cologne. Here the car parts and turbocharger specialist have together created a warehouse that ensures an optimised flow of orders and goods, as well as 100 % access to all items.
The objectives were clearly defined: A high level of availability of products in the range, as well as an optimal internal material flow process, and all this with short movement and order picking times. In addition, the conveyor technology at Hans Hess Autoteile was to be integrated into the racking system and at Motair the clean area had to be clearly separate from the dirty area. United in a hall separated by a dividing wall, 2/3 Hans Hess Autoteile and 1/3 Motair, and with over 2000 m² of storage space, SSI SCHAEFER has designed and equipped a manual, customised warehouse for both companies. With conveyor technology and a rapid-open gate, the hall components are directly connected. A total solution that wins out on a number of counts: A pallet warehouse for interim storage in the incoming goods section and a connected 3-tier modular shelving system are housed in the first section of the hall for Hans Hess Autoteile. The mezzanine warehouse with a basic area of approx. 1200 m² forms the core of the system, complete with racking. All three tiers are interconnected with a gate hoist as well as stairs. The mezzanine construction comprises standard elements. Storage and transportation is carried out in approx. 3700 containers from the intralogistics specialist.
Nevertheless: A modular storage system in itself is nothing new. What is more impressive is the design and planning that SSI SCHAEFER has developed. For example, the existing automated conveyor technology has been integrated into the racking system at the company’s request to ensure optimal space utilisation across three levels. The company Motair has over 40,000 parts in the second section of the hall, and these are also stored on a two-tier mezzanine construction in an R 3000 system. Special feature: To handle the delicate components and protect them against dirt, the clean area is strictly separated from the dirty area by a wall, and marked in colour. To ensure ‘on brand’ design in line with the CI concept, the pallet racking and the racking system was delivered in the company colour of “blue”. This means that both companies have an intelligently designed warehouse setup that meets their individual needs and offers them the ideal equipment level for the future.
Automotive Solutions
Reference Projects
A Display Platform for Bicycles The company Fahrrad XXL Feld GmbH is highlighting the meaning of its name using an apparently ‘floating’ platform integrated into the sales area. Up to 1000 bicycles wait ready assembled for customers. Special feature: The partly 2-storey warehouse is clearly and attractively identified with the sporting world in terms of design. Across Germany the company Fahrrad-XXL Group operates 14 specialist stores and is one of Germany’s most popular bicycle brands when it comes to sales. “As we were planning to expand our shop area due to increasing demand in the store close to Bonn, we wanted to achieve maximum use of the space and storage volume as well as optimise the logistical processes with regard to customer service”, explains Peter Feld, Managing Director at Fahrrad XXL Feld. Once the sales area at the specialist store had been tripled in size and the old area was gradually modified to fit with the new space, SSI SCHAEFER integrated a mezzanine system with an open design, directly in the sales area. As the new storage space was to be visible to the store‘s customers from both inside and outside, it was essential that the mezzanine didn’t just look like an industrial system. “Our task was to visually integrate the entire system, including the required functionality, into the sport-focussed store area”, explains Michael Winterberg, Project Manager at SSI SCHAEFER.
68
In addition, staff needed to be able to transport the bicycles easily from the top mezzanine level to the bottom. The mezzanine warehouse, 2 tiers high in parts, forms the heart of the new storage area. The construction consists of standard elements from the SSI SCHAEFER range and covers around 525 m2 at a maximum area load of 300 kg/m2. The levels are connected using stairs. To integrate the mezzanine even further into the visual design of the sales area, SSI SCHAEFER painted all non-galvanised parts slate grey to match the sales area. The warehouse was planned down the smallest detail and supplied, fitted, fully set up and handed over on schedule in a carefully agreed construction schedule of just 1.5 weeks. To make access to the bicycles easier for staff members, rails on the stairs allow rapid and simple inward and outward movements of the goods. There is also the option for future expansion, for example by using automated conveyor technology. Whereas previously part of the sporting goods were located off the store site in another warehouse in the nearby location of Troisdorf, all 16.000 bicycles and 2000 home sporting products are now housed on site.
69
Automotive Solutions
SSI SCHAEFER-Group
The SSI SCHAEFER Group The SSI SCHAEFER-Group consists of the following companies
Fritz Schäfer GmbH, Neunkirchen SSI Schäfer Noell GmbH, Giebelstadt SSI Schäfer Peem GmbH, Graz Salomon Automation GmbH, Friesach/Graz
and is among the leading providers of warehouse and logistics systems worldwide You’ll find the latest news from SSI SCHAEFER, customer newsletter “update”, information about recent projects, detailed product information, brochures and catalogues on our website:
www.
ssi-schaefer.com
FRITZ SCHÄFER GMBH Fritz Schäfer GmbH is based in Neunkirchen, which is also the international headquarters of the SSI Schaefer-Group. For decades the company has been a leading, full-service supplier of high-quality systems for storage, production, office, waste management and recycling.
CERTIFIED
Storage, order-picking and transport containers Modular shelving systems, platform systems Pallet, longspan, cantilever arm and mobile shelving systems Live storage and online shelving systems Fully automated high rack and silo warehouses Dynamic small parts warehouses Workshop, production and office equipment Waste management and recycling
70
71
Automotive Solutions
SSI SCHÄFER NOELL GMBH
SSI SCHAEFER-Group
SALOMON AUTOMATION GMBH
SSI SCHÄFER NOELL GMBH, Giebelstadt
SALOMON AUTOMATION GMBH, Friesach bei Graz
SSI Schäfer Noell GmbH as a general contractor with international expertise offers turnkey total solutions for storage and logistics. The spectrum ranges from system planning and consultancy via the realisation of complex facilities including tailored service packages.
Salomon Automation GmbH is a general contractor, developing tailor-made complete solutions for manual and fully automatic storage systems. The company supports its customers from identification of the solution via software implementation and selection of the optimum IT and warehouse technology infrastructure including staff training.
Planning and consultancy for general contractor solutions IT systems for warehouse management and material flow control Picking equipment After-sales service and maintenance
SSI SCHÄFER PEEM GMBH
SSI SCHÄFER PEEM GMBH, Graz/Austria SSI Schäfer Peem GmbH specialises in modular order-picking technology. The company plans, develops and produces highly dynamic small parts conveyors and automatic conveyor systems, including automatic order picking systems.
72
Conveyor technology for containers, cartons and pallets Sorting and distribution systems Automatic and paperless order-picking systems Container and paper handling systems
Planning and consultancy for general contractor solutions Automated and manual logistics systems Modern, release-compatible logistics software System modernisations
Combined Expertise – Benefits of a Group
SSI SCHAEFER is a leading specialist in the planning, design and implementation of projects in the field of intralogistics. With a comprehensive product range we generate efficient and customised logistics solutions – at any location in the world.
Defined interfaces between all solution components also offer flexibility and the basis for expanding solutions, always conforming to the latest technological standards. This applies both to individual systems and to complete plants. The combining of expertise and the utilisation of synergetic effects in the SSI SCHAEFER-Group form the prerequisite for reliable and rapid project processing. This also applies in particular when operating as a general contractor.
73
Automotive Solutions
SSI SCHAEFER-Group
A strong partner worldwide
We make being easily accessible for our customers a top priority. This is why we have offices around the world with subsidiaries and sales partners. Our production sites around the globe guarantee consistent focus on our customers. The use of the latest production technologies ensures direct contact with the marketplace and powerful service capabilities.
NORTH-AMERICA
The ability to understand the language and culture in question is the best possible way to offer efficient project management, high quality system integration and first class support.
Canada Mexico USA
EUROPE
This global network continuously provides us with valuable ideas for the latest newest developments, product improvements and improvements in the customer service arena. This ensures fast response times to meet the needs of our customers expertly and on an ongoing basis.
SOUTH-AMERICA Argentina Brazil
Contact us – at a location near you.
Germany Belgium Denmark Finland France Great Britain Italy Netherlands Austria Poland Romania Sweden Switzerland Spain Czech Republic Hungary
ASIA Singapore China Malaysia Hong Kong India Indonesia Philippines South Korea Thailand Taiwan Vietnam
MIDDLE-EAST United Arab Emirates
AUSTRALIA
A complete list of all the current contact information for our subsidiaries, offices and contractual partners can be found on our website under the “Contact” menu option
Australia
Other representatives and sales partners in: Egypt, Bahrain, Brunei, Chile, Estonia, Iceland, Jordan, Croatia, Kuwait, Lebanon, Luxemburg, Latvia, Lithuania, Norway, Oman, Peru, Russia, Slovakia, Slovenia, Ukraine, Cyprus In the “News” section you will find information on a number of interesting topics and the latest projects being implemented.
Austria, Wels
Belgium, Zaventem
Netherlands, Arnhem
Sweden, Malmö
USA, Charlotte
Canada, Brampton
Switzerland, Neunkirch
France, Yutz
Singapore
Czech Republic, Hranice
China, Kunshan
Malaysia, Johor
74
75
SSI SCHAEFER LTD. Manufacturing plants for warehouse, production and office equipment, waste management and recycling 83/84 Livingstone Road Walworth Industrial Estate GB-Andover, Hampshire SP10 5QZ Phone +44 / 12 64 / 38 66 00 Fax +44 / 12 64 / 38 66 11 eMail solutions@ssi-schaefer.co.uk www.ssi-schaefer.co.uk Autom_eng/uk 0607-102010-w 1.5/102010 • Printed by Druckerei Hachenburg © by SSI SCHÄFER
We reserve the right to make technical modifications to any of the products shown in this catalogue. Any colour deviations of the products from the original are due to printing technology. This catalogue is supplied E & OE.