Appendix A: LEED for New Construction Leadership in Energy and Environmental Design LEED for New Construction and Major Renovations Version 2.2 Š United States Green Build Council (USGBC) 2005
The information below relates to Leadership in Energy and Environmental Design (LEED) for New Construction and Major Renovations Version 2.2 Š United States Green Build Council (USGBC) 2005. MonierLifetile potentially contributes to LEED project certification points. MonierLifetile's Lifecycle
MonierLifetile Concrete Roof Tile
LEED for NC Requirements
LEED Category
Increase demand for building materials and products that are extracted and manufactured within the region, thereby supporting the use of indigenous resources and reducing the environmental impacts resulting from transportation.
Material Resources 5.1: Regional Materials
Reduce heat islands (thermal gradient differences between developed and undeveloped areas) to minimize impact on microclimate and human and wildlife habitat.
Sustainable Sites 7.2: Heat Island Effect
Increase demand for building product that incorporates recycled content materials, thereby reducing impacts resulting from extraction and processing of virgin materials.
Material Resources 4.1: Recycled Content
Conserve existing natural areas and restore damaged areas to provide habitat and remote biodiversity.
Sustainable Sites 5.1: Site Development
Max. Category Points
Raw Material Generating premium construction material from nature's close-tohome ground resources.
MLT increases demand for environmentally preferable products through extracting, processing, and manufacturing sustainable concrete tile in regions across the nation. Tile components used are: sand, water, cement and pigment.
(MR 5.1)
1
Product / Solution / System Saving through innovation. (Economic Innovation)
Select MLT roof tiles may meet or exceed solar indexes of 29, greatly reducing air conditioning needs.
(SS 7.2)
1
Recycling Life Concrete is recyclable.
MLT recycles scrap tile. Through crushing followed by sifting, the filtered concrete tile content is redistributed and recycled in manufacturing to increase waste diversion and environmental impacts.
(MR 4.1)
1
Responsible Installation Protecting businesses by partnering with the environment.
MLT packages tiles on wooden pallets that are recycled and reused.
(SS 5.1)
1
Waste Management Partnering with the community to distribute the life and influence of concrete.
MLT prides itself in manufacturing quality concrete invaluable for re-use in regional construction fill needs or community landscaping designs.
Divert construction, demolition and landclearing debris from disposal in landfills and incinerators. Redirect recyclable recovered resources back to the manufacturing process. Redirect reusable materials to appropriate sites.
Material Resources 2.1: Construction Waste Management (MR 2.1)
Total Maximum Points Achievable for using MonierLifetile products or systems: % of Certification Requirements:
The information provided above is intended as a guide for claiming the maximum number of points under the scheme. The builder should check the specific scores for each product and project.
1
5 19%
Appendix B: LEED for Homes Leadership in Energy and Environmental Design LEED for Homes Reference Guide FIRST EDITION Š 2008
The information below relates to Leadership in Energy and Environmental Design (LEED) for Homes First Edition Š United States Green Build Council (USGBC) 2008. MonierLifetile potentially contributes to LEED project certification points. MonierLifetile's Lifecycle
MonierLifetile Concrete Roof Tile
LEED for Homes Requirements
LEED Category
Max. Category Points
Raw Material Generating premium construction material from nature's close-tohome ground resources.
MLT increases demand for environmentally preferable products through extracting, processing, and manufacturing sustainable concrete tile in regions across the nation. Tile components used are: sand, water, cement and pigment.
Use building materials or products that have been extracted, harvested or recovered as well as manufactured within 500 miles of the project site.
Material Resources 2.0: Environmentally Preferable Products (MR 2.0)
1
Sustainable Sites 3.0: Local Heat Island Effects
1
Product / Solution / System Saving through innovation. (Economic Innovation)
Select MLT roof tiles may meet or exceed solar indexes of 29, greatly reducing air conditioning needs.
Reduce solar heat and the subsequent transfer of heat to the surroundings by using a material with a solar index of 29 or more.
(SS 3.0)
Responsible Installation Protecting homes by partnering with the environment.
Select MLT roof tiles may meet or exceed the requirements of ENERGY STAR, greatly reducing air conditioning needs.
Improve the overall energy performance of a home by meeting or exceeding the performance of an ENERGY STAR labeled home.
Energy and Atmosphere 1.0: Energy Performance
4
(EA 1.0)
Waste Management Partnering with the community to distribute the life and influence of concrete.
MLT prides itself in manufacturing quality concrete invaluable for re-use in regional construction fill needs or community landscaping designs.
To divert waste from landfills, develop a construction waste management plan assessing where material may be reused regionally. Increased waste diversion. Divert 25% or more of the total material taken off the construction site from landfill and incinerators.
Material Resources 3.2: Construction Waste Management and Reduction (MR 3.2)
Total Maximum Points Achievable for using MonierLifetile products or systems: % of Certification Requirements:
The information provided above is intended as a guide for claiming the maximum number of points under the scheme. The builder should check the specific scores for each product and project.
4
10 21%
Appendix C: NAHB Green Building Standard National Association of Home Builders NGBS Draft Standard Version #2.0 © 2007 NATIONAL ASSOCIATION OF HOME BUILDERS
The information below relates to the National Association of Home Builders (NAHB) National Green Building Standard (NGBS) Draft Standard Version #2.0 © 2007. Points contribute to the total for the three different levels of NAHB Building. MonierLifetile's Lifecycle
MonierLifetile Concrete Roof Tile
NAHB Model Home Green Building Standard
NAHB Category
Points
Raw Material Generating premium construction material from nature's ground resources.
MLT increases demand for environmentally preferable products through extracting, processing, and manufacturing sustainable concrete tile in regions across the nation. Tile components used are: sand, water, cement and pigment.
Locally available indigenous materials are used for major elements of the building.
608: Indigenous Materials (NAHB 2.8.1)
2
Product / Solution / System Saving through innovation. (Economic Innovation)
Select MLT roof tiles may meet or exceed solar indexes of 29, greatly reducing air conditioning needs.
Horizontal hardscaping material are installed with a solar reflectance index of 29 or greater.
505.2: Innovative Practices (NAHB 3.3.5.1)
4
Life Span Concrete's resilience.
MLT longevity provides low lifecycle costs, improved carbon footprint, and due to its mineral composition it does not pollute or is negatively impacted by the environment.
Select the more environmentally preferable product or assembly for an application based upon the use of a Life Cycle Assessment tool compliant with ISO 14044 or other recognized standards that compares the environmental impact of building materials, assemblies or a whole building.
609: Environmentally Preferable Product
Building materials with recycled content are used for two major components of the building.
604.1: Recycled Content Building Materials
(NAHB 2.8.2)
3
Recycling Life Concrete is recyclable.
MLT recycles scrap tile. Through crushing followed by sifting, the filtered concrete tile content is redistributed and recycled in manufacturing to increase waste diversion and environmental impacts.
4
(NAHB 2.5.2 / 2.5.3)
Responsible Installation Protecting homes and businesses by partnering with the environment.
MLT innovations provide cutting edge energy efficiency options for you home or business. Ask your local sales representative for more information about MonierLifetile's innovative systems.
Passive cooling design features are used. Solar reflective roof or radiant barrier is installed in Climate Zones 1, 2 or 3. Roof material meets a 3 year aged criteria of 0.50. Roofing material is installed with a minimum ¾” continuous airspace offset from the roof deck from eave to ridge. (Please refer to NAHB reference manual for more detail.)
704.3.1.3: Cooling Design Features
Waste generated during construction is recycled.
605: Construction Waste Management
3
Waste Management Partnering with the community to distribute the life and influence of concrete.
MLT prides itself in manufacturing quality concrete invaluable for re-use in regional construction fill needs or community landscaping designs.
7
(NAHB 2.4.1)
Total Maximum Points Achievable for using MonierLifetile products or systems: % of Bronze Requirements:
The information provided above is intended as a guide for claiming the maximum number of points under the scheme. The builder should check the specific scores for each product and project.
23 10%