Wire jewelry DIY - how to make rings in butterfly pattern This tutorial is going to demonstrate you a way about how to make rings in butterfly pattern; in this tutorial, you will find wire jewelry diy is really a fancy thing to do.
Our tutorial of how to make rings in butterfly pattern proves to result in attractive form without any exaggeration; during this wire jewelry diy, we display all the relating details, ranging from specific materials to clear step picture.
Materials and tools:
1.5mm pink aluminum wire
Round nose plier
Flat nose plier
Wire cutter
Marker pen (or any ring mandrel)
Instructions: Step 1: make a heart pattern at one end
Step 2: make another heart at other end
1st, snip a length of 30-35cm alum wire;
1st, pick a piece of thread and measure the
2nd, form a P shape with round nose plier;
circumference of finger;
rd
3 , at the top position of P, counter-clockwise
2nd, decide the length you should leave for ring
wrap a tiny loop;
base;
4th, shape a heart pattern and coil the rest wire
3rd, make another heart in opposite direction.
below heart.
Step 3: finish the butterfly ring Wrap wire around marker pen and shape out the full ring.
The finished work will look like this:
Tada, our how to make rings tutorial is done. During this wire jewelry diy, different color, sizes and even diversified butterfly patterns can be experimented and applied into this sort of jewelry making.
A variety of jewelry tools can be found in our webpage: http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html