Tanks rebuildable d a distribution

Page 1

Tanks Rebuildable D A Distribution




Rebuildables, or RDAs are tanks wherein the customer is meant to use their own choices of wire and wick to fire at any custom combination of resistances and materials. This is a bit more complicated, but allows the vaper to achieve the most customized and extreme results.


Nimbus V3 RDA 

SKU: MODS:NIM

Brand:

Generic / Clone


Product Description This is an advanced dripping atomizer system for experienced users. 

Specs: 510 Connector / Tips Airhole size: 1 MM Stainless Steel Grade 304

3 Terminals (with holes)

Splash Shield



Be Advised: 1 - The atomizer may become damaged if the mesh is not oxidized correctly. 2 - Do not wind the wire too tightly around the pole. 3 - A rebuildable coil / wick should always be tested carefully with a meter before it is used. Faulty wicks / coils will blow electronic devices.


4 - New coil / wick units should always be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit. 5 - No new coil / wick assembly should be used on an electronic device until known to be safe. 6 - These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.


7 - RAs or RTAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short). Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.


Igo-w (PC Cap) RDA 

SKU: MODS:IGOCAP

Brand:

Generic / Clone


Product Description Clear cap and drip tip for the IGO W family of dripping atomizers. Dual air holes for maximum air flow.



Acrylic top cap

Two step design on the cap

Pre-drilled dual air holes

3 step design matching drip tip

Dual o-ring

Available for IGO-W atomizer


Igo-W4 RDA 

SKU: MODS:IGOW4

Brand:

Generic / Clone


Product Description The new IGO-W4 is an upgraded version of the popular IGO-W. It features the same 3 hole post for easy dual coil builds. The main feature of the new IGO-W4 is in the cap design. It now has a larger volume top cap for extra airflow, for even more extreme vapor production. Stainless steel comes with silica wick, kanthal wires, and extra o-rings.



Dripping atomizer

Polished stainless steel finish

Single air hole in top cap

Triple-post system


Fits most 510 drip tips (drip tips sold separately)

Double o-ring seals on bottom base

Height without drip tip: 25.5mm (Approx.)


For details information, visit us

http://strictlyecig.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.