Refurb & Developer Update - February 2023

Dating back as far as the 12th and 13th centuries, the name ‘peg tile’, originally came from the softwood pegs, which were driven through two holes in the top edge of the tiles which allowed them to hang on laths or battens.

As the original peg and plain roof tiles were made by local or travelling craftsmen who relied on hand moulding and simple firing techniques, the tiles they produced had a wide variation of size, texture, camber and colour. This was despite the Royal Charter of 1477 which aimed to standardise the size of peg and plain tiles

Eventually, the widespread use of traditional peg tiles gradually declined with the introduction of handmade ‘plain tiles’ where the wooden pegs were replaced by clay nibs formed into the tile from which to hang the tiles. This reduced the cost and made the fixing of the tiles easier.

THE EVOLUTION OF THE HANDMADE KENT PEG TILE

Made from English clay, Kent Peg roof tiles hold a special place in the English architectural landscape – particularly in the South East of England, where they were used on most houses, churches, barns and farmhouses, on roofs and walls alike.

Cheaper mass-produced machinemade clay and concrete roof tiles then became available in the 1900s, and although these lacked the aesthetic irregularity of the handmade tiles, their again cheaper cost led to their popularity.

However, in recent years, tighter planning regulations and recognition of the need to conserve our historic buildings with locally obtained sustainable and more visually sympathetic materials has resulted in a renewed interest.

Reclaimed or New?

Old peg tiled roofs are constantly falling into disrepair, largely through damaged pegs, insect or fungal attack, wind-lift and the effects of frost, particularly on north-facing slopes.

Second hand tiles from specialist suppliers have traditionally been the preferred choice on historic buildings, particularly if only a few tiles are needed. They blend in extremely well, provided they are of a compatible size, texture and colour and reclaimed from the same locality.

However, good reclaimed roof tiles from legitimate sources are increasingly rare, and expensive, and after many years of wear and tear, their condition and life expectancy is inevitably uncertain and they do not hold performance guarantees!

In cases where large sections or entire roofs need to be replaced, new handmade peg tiles, such as those made by Tudor Roof Tile Co Ltd, are often a much more reliable and a cost-effective option.

Tomasz Solnica, Managing Director of Tudor Roof Tile Co Ltd.

Machine or Hand Made?

One of the problems architects, conservationists and owners of heritage homes face is that the sought after ‘rustic’ character of the original Kent Peg Tile, with its subtle variation in texture, colour and camber is difficult to replicate using modern manufacturing methods.

Despite significant advances, the majority of mass-produced ‘machine made’ clay roof tiles are still far too dull and uniform in appearance to be a convincing substitute.

A very small number of ‘studio potters’ do still make bespoke handmade roof tiles, relying on skilled craftsmen to not only painstakingly form each individual tile, but to also recreate bespoke colourings. Such meticulous detailing is often reflected in their production costs.

Tudor Roof Tile is one of the few remaining English manufacturers, who combine the best of both traditional and modern tile making techniques to create a time weathered ‘olde world’ rustic look.

Handmade with meticulous attention to detail, each clay peg and plain tile is individually hand pressed, moulded and trimmed using some of the techniques that have hardly changed over the years. The tiles are then strengthened using advanced firing techniques in order to give the final product exceptional performance and durability.

Mindful of the varying requirements of each project, Tudor can make tiles with bespoke sizes and shapes, so that they are suitable for both ancient and modern buildings as required.

Historical Authenticity

When restoring a historic roof, particularly when it is grade listed, it is important to respect the original character and detailing.

For instance, the smallest change from the original peg tile size can damage the overall aesthetic. This is why Tudor offers a range of non-standard bespoke sizes in a variety of soft muted tones that age and blend well with the faded roofs of older buildings.

Made with either square or round peg holes, they are suitable for use with traditional wooden and modern aluminium pegs.

Modern Architectural Design

Whilst remaining true to its roots and original character, the Kent Peg Tile is continuing to evolve and develop to meet the changing needs of today’s market.

Increasingly, new property owners are asking their architects for a ‘wow’ factor external appearance. Here again the bespoke handmade peg tile proves to meet all requirements for aesthetics and performance at a realistic cost.

Available in a wide range of size, with single or double camber, a wide range of colour options, and matching ornamental tiles, they are adding value, character and individuality to modern properties.

For those architects and conservationists wanting to create a roof that is very much rooted in our architectural heritage, the Kent Peg Tile is a very attractive option.

Tudor roof tiles are available from leading roofing and builders merchants.

For more information, contact:

Tudor Roof Tile Co. Ltd, Dengemarsh Road, Lydd, Kent, TN29 9JH.

01797 320202

info@tudorrooftiles.co.uk www.tudorrooftiles.co.uk

As a market leader in low carbon heating systems, we help housing developers comply with the changes to Part L of the Building Regulations by specifying Ecodan Air Source Heat Pumps for new build homes.

Our dedicated website pages provide you with support at every one of the seven steps of the RIBA Plan of Work.

ecodan.me.uk/rduf

GRAVITY BLACK WATER DISCHARGE IS

When gravity fall for wastewater and sewage services in a commercial building design is not available then a pumped solution is required.

Floor mounted lifting stations, installed in a plant room or basement, provide a reliable pumping solution for drainage from kitchens, toilets, and showering/changing facilities.

Pump Technology Ltd, based in Berkshire, have been experts in commercial building pumping solutions for over 30 Years and are authorised by leading manufactures, such as Jung Pumpen GmbH and Saniflo SFA, for the specification, supply and support of their pumping equipment. Both of these manufactures provide a range of lifting stations.

Choosing the correct lifting station is not simply about how far and how high it needs to pump. The specific application must be considered to ensure reliability and long equipment life.

As an example, for a small office with a handful of staff members using the facilities the Saniflo SFA range would be a suitable and cost saving pump solution.

If the building was a restaurant, gym or similar being used by the public with potentially high usage, then the correct selection would be one of the Jung Pumpen EffluMaxi / Compli lifting stations.

When potential customers call or email the Technical Team at Pump Technology Ltd, they will connect with an engineer straight away about their site requirements. A full product specification and quotation providing the required pumping solution will be emailed within a few hours. The company pride themselves on this speed of personal service which is highly valued within the industry!

Lifting Stations are relatively compact. They are available in cutter format for small bore discharge pipework, 32mm diameter pipe for example, or high discharge heads, typically over 10m. Free flow vortex impeller versions provide for larger pipe diameters such as DN80/DN100. The stations are also available in single pump or duty standby configurations. These can even be linked together for large capacity applications such as sports

When gravity fall for wastewater and sewage services in a commercial building design is not available then a pumped solution is required.

WHEN

NOT AN OPTION!

Jung Pumpen have recently developed the EffluMaxi / Compli range, making installation and maintenance even easier and quicker. The EffluMaxi / Compli 400 now features a height adjustable, sliding, clamping, inlet flange (Stepless) and multiple inlet connection options. It also has a variable discharge branch (DN80 or DN100), a low weight, rotatable, non-return valve and buoyancy fixing protection without having to move the unit. The integrated tank volute provides better flow behaviour, no corrosion and less clogging.

An updated control panel adds features such as a maintenance interval display and additional connection for an additional, remote high-level alarm.

Pump Technology Ltd, hold the UK’s largest stocks of Jung Pumpen and Saniflo SFA commercial pumping products ready for next day delivery. They also have a network of approved National Pumping Partners for commissioning and maintenance if required.

Other products available from the company include the DrainMajor floor mounted wastewater range and, if gravity discharge is not possible from the outside of the building, the below ground Minmatic and PumpMatic pumping stations. The PumpMatic range is manufactured in-house by a group Pump Technology Ltd. company and a standard range of tank sizes and pump options are available. However, these tanks can also be customized in depth, diameter and inlet connection points to suite site elevations and orientation.

Granite and quartz worktop supplier, Roann Limited, has reported record-breaking revenue in 2022, with a 15% increase in sales year-on-year.

From January to December 2022, the Wakefield-based business reached an annual sales figure totalling over £8.3 million.

Notable key projects for this period included collaborations with established companies including Crest Nicholson, Barratt Homes, and Taylor Wimpey across the UK.

Over the past four years, the business has experienced significant growth and has increased sales by almost 50%, when comparing figures between 2018 and 2022.

ROANN LIMITED REPORTS RECORD BREAKING SALES IN 2022

A representative from Roann Limited has reported that in 2023, the business has forecasted further sales growth.

Scott Wharton, Operations Director of Roann Limited, commented “We are so proud to be reporting on another positive year for Roann Limited. We have experienced extensive growth over recent years and there’s no sign of it slowing down anytime soon. We’re looking forward to another busy year!”

HETAS HOT TIP OF THE WEEK

COLD PLUG – WINTER SAFETY ADVICE FOR STOVE USERS

A‘cold plug’ in your flue can be an unexpected issue during the colder weather. It is an invisible plug of cold air that can form in your chimney when temperatures drop significantly, and the chimney is left to go cold. This can result in the flue being plugged, which pushes smoke back down and out of your stove.

It can occur overnight during a sudden drop in temperature when your stove is not in use or when a clear chimney has not been used for a period of time.

There are measures you can take to limit the risk of a cold plug:

• Leave your stove door open at least 30 minutes before lighting and when not in use.

• Using the top down method of lighting a fire.

• Starting with a firelighter can be an effective way to warm the flue.

Ideally, you want to gently increase the internal temperature of your chimney to remove the cold air plug.

Chief executive officer at HETAS Bruce Allen comments: “With the current forecast predicting the potential for a sudden drop in temperature weather warnings being issued as snow and ice creep in, we’re urging those with wood-burning stoves to carry out the above steps in order to limit the risk a cold plug can create. Solid fuel stoves are ideal for this time of year, but it is important that they are properly maintained and understood by users to ensure optimum safety and efficiency during the weather where you need them most”

Book in with a HETAS-registered chimney sweep or installer, who will be able to offer further seasonal tips when they complete your installation, annual service or regular sweep.

For more tips and advice on making the most of your solid fuel appliance, visit hetas.co.uk.

Due to their construction and smooth surfaces, CaberMDF Pro and Pro MR are ideal for use where intricate detailing is required; plus, the boards are ideally suited to machining and surface finishing, as well as being able to accept high quality paint finishes.  Both are easy to saw, drill and rout cleanly without chipping or splintering.  Therefore, elaborate detailing is possible, while for the most artistic of interior designers, developers or builders, the boards will even accept foils and ornate veneers.

The versatile panels are suited to shop fitting, general purpose joinery and furniture making, as well as wall panelling, architectural mouldings, and the production of doors.  They are also frequently specified for exhibition stands, staircases and even fire surrounds, as well as in public buildings, banks and hotels.

Then in terms of the product designation, the MR refers to the moisture resisting treatment and conditioning given to the CaberMDF Pro MR boards during their production, making them suitable for use in kitchens, bathrooms and utility rooms or other situations where the environment is prone to high humidity. Ruggedness as well as accuracy of manufacture is also enhanced by the industrial grade’s superior screw and fastener holding over other types of panel product, thanks to the board’s carefully selected, high quality fibres and internal bond strength.

At 1220mm wide, both boards are available in lengths of 2440 or 3050mm; and in thicknesses of 6, 9, 12, 15, 18, 22, 25 and 30mm.  For CaberMDF Pro, extra options include sizes of 1525 and 1830mm, plus 2745 x 1220mm with the longest board measuring 3660 x 1220 mm.

For peace of mind, the boards also conform to European E1 emission standard, comply with BS EN 622: Parts 1 and 5, and carry the CE mark.

TOP PERFORMING CABERMDF PRO & PRO MR FROM WEST FRASER

Both CaberMDF Pro and CaberMDF Pro MR from timber product specialist, West Fraser, are premium grade Medium Density Fibreboards developed for interior joinery: their uniform consistency offering all the benefits of timber, but without the natural defects.

To find out more about West Fraser’s products for housebuilders, get in touch with Dan Clarke - email Daniel.Clarke@westfraser.com or download product brochures from the housebuilder page of the West Fraser website https://uk.westfraser.com/housebuilders/

For further information, call 01786 812 921 or visit https://uk.westfraser.com/

WEST FRASER – PERFECT FOR YOUR 2023 PANEL PROJECTS

As the expert in innovative engineered wood panels for the UK construction and housebuilding market, we support our customer in lots of ways. Our popular downloadable checklist for housebuilders and interactive product guide proved invaluable in 2022; they are simple tools which ensure you are choosing the best panel product for your project.

You can download the checklist which will help in the selection of the perfect product from floor to roof. As you’ll see, the checklist is just one of many resources, available here , designed especially for the housebuilder.

The housebuilders’ page includes a fully interactive product guide to download, details of projects using our popular boards, answers to frequently asked questions, and samples and brochures to order. A simple click on the tabs

at the side of the guide opens up the chosen product, application or technical information page. Whatever the project, the easy-to-navigate guide makes choosing the right product simple. The guide contains all the information needed on panels in the SterlingOSB Zero, CaberFloor , and CaberMDF portfolios, including detailed technical product data and installation advice. In addition to this, our guide highlights different applications, including roofing, flooring, walling, timber frames, hoarding, shopfitting, and furniture among others such as moulding and packing.

If you prefer a paper copy of the guide, which also encompasses contact information for general enquiries and technical expertise, you can request one here!

As you’d expect from the UK’s No 1 producer of engineered wood panels, we are committed to playing our part in reducing our emissions, and we are

greener than you might think.  Our products are net carbon negative.  Find out more here

All West Fraser panel products produced in the UK are manufactured in mills that have obtained the coveted environmental ISO 14001 accreditation. Responsibly sourced, the panels are FSC-certified and created from locally grown timber, cutting embodied carbon from transportation.

For further information, call 01786 812 921.

It’s easy to select the perfect panel for your project with our panel samples, interactive product guide and downloadable checklist

BILCO UK SETS THE STANDARD FOR SAFETY AT GLASGOW HOUSING DEVELOPMENT

Glasgow’s latest redevelopment project, located on Langside Road, is built upon the former site of the city’s Victoria Infirmary and consists of a large housing development that includes 413 flats, offices and retail space.

As part of the construction process, BILCO UK was commissioned to supply six ESW50REM Smoke Vents, in addition to seven E-50TB Roof Access Hatches, to provide the highest standards of safety and efficiency, whilst being sympathetic to the project’s overall design.

Installed onto the roof areas of four blocks of flats by Scottish contractors, Procladd Small

Works Ltd, Bilco UK’s ESW-50REM Smoke Vents were specified to provide essential ventilation in the event of a building fire.

Billy Baillie, Managing Director at Procladd Small Works Ltd, said: “Bilco UK’s Roof Access Hatches and Smoke Vents were incredibly easy to install, and knowing they’re engineered to meet the highest industry standards, it provided both ourselves and the client with the confidence that the installation would set the standard for performance and longevity.”

Constructed with corrosion-resistant materials, Bilco UK’s E-50TB Roof Access Hatches were also installed to provide engineers with safe, regular and convenient access to the roof to conduct essential maintenance.

Engineered with compression spring operators to provide easy one-hand operation, the roof access hatch meets the requirements of Manual Handling Regulations, whilst the automatic hold-open arm locks the cover in the open position to ensure safe egress.

For further information on Bilco UK’s complete range of roof access solutions, please visit www.bilcouk.co.uk or call 01284 701696.

Promotion for Keylite’s John Logue

Keylite Roof Windows (Keylite), part of The Keystone Group, has promoted long-standing Area Sales Manager John Logue to Business Manager (Flat Roof Systems) for the UK and Ireland.

John has been with Keylite for six years, building up customer relationships as an ASM covering Scotland, Cumbria and Lancashire. In 2019, John was made Sales & Specification Manager for these areas, and more recently, he was promoted to undertake the role of Business Manager (Flat Roof Systems) nationwide.

As part of his new remit, John has responsibility for developing Keylite’s range of Flat Roof Systems across all markets, providing support for architects, housebuilders, national contractors and roofing contractors on a daily basis.

John commented: “No day has been the same since I started my new role. From liaising with internal and external teams and helping support product development, to exploring current trends and visiting customers, I relish the variety.

“Anyone who knows me knows I am incredibly passionate about the Keylite brand and making tailored recommendations on the superb range of products that we offer, whether it’s providing technical advice for healthcare and education settings, or legislation guidance for high rise apartment buildings.

“I feel very fortune to be part of a business like Keylite; the management team has helped me carve out this new role and develop it into what I think it should be. I’m very much looking forward to continuing to grow awareness of our Flat Roof Systems and work alongside Keylite’s experienced teams to support customers with their projects.”

Jim Blanthorne, Managing Director, added: “I am delighted that John will take on the role of Business Manager for Flat Roof Systems. John’s wealth of knowledge and ability to build strong relationships with his customers and colleagues has been a driving force behind his fantastic progression at Keylite. I look forward to supporting John in his new role and working with him to strengthen our offering of Flat Roof Systems to customers.”

For more information on Keylite Roof Windows and its expansive product range, please visit www.keyliteroofwindows.com, download the product brochure https://bit.ly/3mwfE6j, call 01283 200 158 or email info@keyliteuk.com.

GRAMPIAN USED ON SOCIAL HOUSING PROJECT IN CORBY

This is the second development where Russell Roof Tiles has worked in partnership with leading developer Modus Partnerships Ltd, based in Leicestershire. Modus Partnerships Ltd, who specialise in building affordable homes for housing associations across the Midlands selected Russell Roof Tiles for their reliability and skill in the sector.

The new homes were developed for social rent purposes to help create affordable rental properties. The site where the build took place was formerly occupied by Northamptonshire County Council’s social services department and has been vacant for nearly a decade. It has now been bought back to life thanks to a scheme set up by PA Housing as a part of its development programme.

Russell Roof Tiles (RRT) has supplied concrete roof tiles to support a social housing project for 32 new two- and three-bedroom social homes that Corby families will benefit from, at Forest Gate Road, on the Modus Partnerships development.

be working with Russell Roof Tiles again on our recent affordable housing development in Corby, and the quality of their product has added significantly to the

in Slate Grey and Cottage Red were used on the site, which form part of Russell Roof Tiles’ Commercial Range of products and is a standard flat interlocking

reliability, and availability of their products. Concrete tiles replicate the appearance of natural looking roof tiles with the benefits of offering greater strength, while

ARE CONCRETE ROOF TILES A SUSTAINABLE CHOICE?

Concrete roof tiles are a popular choice, as they provide excellent aesthetics, performance and durability. They are also a sustainable choice, thanks to their environmentally friendly manufacturing process, thermal efficiency, long lifespan and ease of maintenance.

Here at Marley, all our concrete roof tiles have achieved an A+ rating within the BRE Green Guide. This means that the roof tiles have a low environmental impact and can earn the maximum number of credits in the BREEAM environmental rating scheme.

Manufacturing concrete roof tiles

Concrete roof tiles are made of natural materials, mainly sand, cement, water and iron oxide. The team at Marley has also worked hard to minimise our production waste. We use a minimum of 16% recycled concrete in all of our concrete tiles, and 100% of our concrete tile waste is recycled in production.

Are concrete roof tiles thermally efficiency?

Since concrete roof tiles are very dense, they have a high thermal mass, meaning they absorb and store heat well. The benefit of this is that concrete tiles can absorb heat from the sun. In the summer, this will reduce thermal gains in the home, keeping it cooler. Then, in the winter, the same characteristic will help to keep the home warmer.

The long lifespan of concrete roof tiles

Concrete roof tiles have a very long lifespan. Marley’s products are covered by a 15-year system warranty for our roof systems, and the tiles themselves are generally expected to last more than 60 years. This long lifespan, coupled with minimal maintenance requirements, will help to keep the overall environmental impact of a home low.

Concrete roof tiles: end of life

When looking at the sustainability of any building product, it’s also important to consider how it will be disposed of at the end of its useful life – and if the materials can be recycled or reused.

In the case of concrete roof tiles, they can be easily recycled or reused when they are eventually removed from a property. The process simply requires crushing the old tiles, creating an aggregate that can then be used to create new concrete roof tiles, or other useful building materials.

Learn more about Marley’s concrete roof tiles

As experts in roofing materials, Marley offers a wide range of concrete roofing tiles, with a choice of colours, textures, and shapes to suit any project requirements. As mentioned previously, all our concrete roofing tiles have achieved an A+ BRE rating, so you can rest assured the products are manufactured to the highest environmental standards possible.

If you’d like to learn more about our range of concrete roof tiles, please browse our product pages or download our product catalogue. You can also order samples to see and feel the quality of our roofing products for yourself.

For further information please visit: www.marley.co.uk/roof-tiles/concrete-roof-tiles

NEVER COME UNSTUCK WITH WEST FRASER AND CABERFIX

The CaberFix range, which can be used with many of West Fraser’s panel products, comprises three glue types and two choices of adhesive tape; having been developed for a wide variety of applications and performance requirements.

CaberFix D3 is a PVA adhesive created specifically for use along Tongue & Groove joints on West Fraser’s chipboard flooring range, especially in conjunction with CaberFloor P5, CaberDek and CaberAcoustic. Requiring no fillers, it is fast setting and forms a strong and rigid glue line – while it conforms to DIN EN 204 D3 and BS 476 part 6.

Solvent-free CaberFix D4, meanwhile is a onecomponent polyurethane adhesive for use with CaberDek, CaberShieldPlus and CaberFloor boards. It allows the user to see where a seal is made and is ideal for both bonding flooring boards to joists and securing T&G joints; as well as for sealing the edges of boards.

100% waterproof, CaberFix Joint & Joist is used to create a flexible, but strong and squeak free bond, which can be applied to the tongues and grooves between boards, as well as a variety of other materials including CaberDek boards. Resistant to temperature extremes, this PU adhesive can, usefully, be applied in damp conditions.

CaberFix Tape is a high-performance polyethylenecoated cloth tape, which is 100% waterproof and used for sealing exposed joints as well as perimeter edges. UV-resistant for durability, this easy-to-use solution seals CaberDek edges to walls, and also protects joints during construction phases, even on uneven surfaces.

Acrylic CaberFix X-treme tape has been specially developed for use in extreme weather conditions down to -21oC. The super-strong, scuff-resistant tape can be applied under damp conditions and will not lift when wet; while it also boasts a high tack point: meaning CaberFix X-treme tape has a high initial grab, and gains strength over time.

As is always the case, West Fraser’s experienced technical team is available to provide assistance with product specification, while downloadable data sheets are available at https://uk.westfraser.com

To find out more about West Fraser’s products for housebuilders, get in touch with Dan Clarke – email Daniel.Clarke@westfraser.com or download product brochures from the housebuilder page of the West Fraser website https://uk.westfraser.com/housebuilders/

For further information, call 01786 812 921 or visit https://uk.westfraser.com/

UK’s largest construction sector site solutions company, WysePower, joins RSK Group

The market-leading temporary site service company WysePower, which emphasises the use of carbon-neutral building solutions, has been acquired by the RSK Group, a global leader in the delivery of sustainable solutions.

Founded as WysePlant in 1958, the company began by providing temporary electrics, hoists, cranes, cabins and general plant. Today, WysePower is the market leader in temporary site services, with more than 260 directly employed and qualified staff operating from eight regional UK offices, from Glasgow to Bristol, along with operations in five European countries delivered from its operational centre in Amsterdam. WysePower recorded an annual turnover of £28 million in the last financial year.

WyseBase is part of the WysePower group and offers a carbon-neutral

and cost-effective alternative to traditional concrete foundations for modular and building set-ups, as well as ground stabilisation and walkway solutions. This enables the installation of stacked cabins of various heights without breaking ground. In addition, the foundations are made from recycled materials and are fully recyclable after use, which will save on average 1.66 tonnes of carbon for each tonne of concrete produced.

Recent WysePower projects include data centres across the UK, Europe and Scandinavia, Gigafactories, HS2 works, Grade 1-listed buildings, expansive

commercial and retail developments and a multitude of high-quality residential schemes.

Managing Director Shawn Callaghan, who will continue to lead the business, said: “For more than 60 years, we have developed and maintained the trust and support of our clients, who appreciate the breadth of our service packages, the quality of our designs and installations and the dedication of our employees. We look forward to continuing this work, specialising in prestige projects and emerging market sectors, such as hightech manufacturing, hyperscale data centres and major infrastructure projects while benefitting from the growth RSK can offer. This gives us the opportunity to enhance our project work and client relationships by working with a host of RSK businesses from the same or related sectors.”

RSK Group Chief Executive Officer Alan Ryder said: “I’m pleased to welcome WysePower and its 260 employees into RSK. Temporary site services remain in high demand despite ongoing economic slowdown, and I expect this will only continue. Beyond this, WysePower is a great cultural fit in our group; the ethos and values of the business are very similar to those of the wider RSK family, so I have no doubt they will settle in quickly.”

As RSK continues to deliver its ambitious growth strategy, it now comprises more than 175 companies, employing 10,000 people. The group’s annual turnover at the end of FY22 is expected to be in excess of £800 million, more than double that of the previous year.

The acquisition advisor was James Mines, Partner of FRP Advisory Trading Limited.

www.rskgroup.com

RENAISSANCE FOR TRIED AND TRUSTED W20 STEEL WINDOWS

This is thanks to the general upturn in activity across the housing market, with the focus on the acquisition and refurbishment of rural properties having resulted in higher than usual demand for the replacement of the traditional W20 style windows.

The W20 closely replicates the appearance of the older universal suite of sections and can therefore be found providing reliable service from country cottages to dockland warehouses and in commercial, as well as industrial buildings.

Not only do the slimline sections offer slender sightlines compared to PVC-U and timber frames, but their strength also provides good security and long-term robustness.  In addition, the advancements made in glass technology and the availability of much improved weather-stripping means that the modern W20 window delivers far better energy performance than their single-glazed predecessors.

The President of the SWA and Contracts Director at Associated Steel Window Services, Kris Bennell, comments: “W20 steel frames are the ever reliable, ever popular traditional option for the sector, which are liked by both planners and heritage bodies for use in a host of different property types.

“The glazing beads mean it is possible for new and refurbished W20 windows to accept 16mm thick IG units; and these in turn can feature low-E coatings on the glass, warm edge spacer bars and argon, krypton or xenon gas filling to deliver much improved U-values.  W20 is a system which can work in a summer-house or a commercial building in London and as a stylish room divider or shower screen.  It is just so versatile.”

The SWA offers UK wide coverage with member companies able to carry out the full range of contracts from the repair and restoration of heritage windows through to the installation of major fenestration packages in contemporary commercial, residential and other types of developments.

For further information on the Steel Window Association or if you’re interested in becoming a member, please visit www.steel-window-association.co.uk

Member companies of the Steel Window Association (SWA) have been enjoying a boom in business.

W20 windows pictured by SWA member, Perla Windows

CDW SYSTEMS SET TO TRIAL ALUK LUMINIA F82

The Gloucester-based CDW, part of the East Manor Group, has fabricated AluK’s BSF70 bi-fold for many years and is looking to be able to offer customers an upgrade if they want it.

The Luminia F28 has been designed so the frame and cill have slim sightlines of just 97mm and to be thermally efficient,

claims the company, delivering a 1.3 U-value with double glazing. It features a pop-out handle that sits flush within the frame and HD rollers which allow for smooth and seamless opening.

Jeremy Phillips, CDW Systems’ group chairman, said: “We have had enormous success with the BSF70 from AluK but are

looking at introducing the F28 due to its thermal properties. It’s a much more thermally efficient and modern bifold with better sightlines for uninterrupted views, which is what customers continue to want, and we are lining up training for that in the factory.

“It won’t take over from the BSF70, which we will still be offering, but we are trying to make sure we are prepared for 2025 and whatever that brings.

“We also want to make sure we can offer our customers an upgrade if they want a more stylish, sleek, and high-end aluminium bi-fold door. There will certainly be a demand for it, and we are looking forward to seeing what our customers think.”

LONDON LANDLORD GIVEN SEVERE MALADMINISTRATION SANCTION AFTER LENGTHY FIRE DOOR DELAY

A London-based housing association has been sanctioned for severe maladministration by the Housing Ombudsman after it failed to provide fire-safe doors in a property more than 18 months after the resident moved in.

Wandle, a 7,000-home landlord, was sanctioned by the ombudsman for what it described as “cumulative failures in addressing fire safety issues in a resident’s flat”.

In a release today, the ombudsman found that the landlord was unable, despite a number of visits, to provide assurances that the doors in the resident’s flat were fire-rated and whether that meant they needed replacing.

The resident also raised concerns about the general condition of some of the doors, which were not dealt with promptly.

Wande told Inside Housing that it has now “apologised unreservedly to the tenant”.

The resident first requested confirmation that all the doors were fire doors upon moving in, following a mutual exchange.

However, after four visits over a ninemonth period, the landlord still had not clarified the fire rating of the doors.

Feeling this was a fire safety issue, the resident also voiced concerns about the front door missing a fire strip and not fitting the frame.

The resident, who has recorded vulnerabilities including autism and

Asperger’s Syndrome, subsequently raised a stage-one complaint.

In response, the landlord said it would assess the doors but these visits still did not establish whether the doors in the property were fire doors.

The resident also wanted to know whether the landlord had responsibility for fixing the other faulty doors she had previously raised concerns about.

The landlord escalated the complaint to stage two, and arranged for a survey which found that the front door required a new fire door, that a new fire door was needed for the lounge and that other door defects needed repairing.

At the end of this process, 18 months after the resident had first moved in, the landlord had still not replaced the front door.

The ombudsman found that while the landlord rectified the matter by arranging a door survey, there was a delay in addressing the fire safety issue raised by the resident.

In addition, the landlord initially treated the issue as a responsive

repair, rather than a fire safety issue, and the ombudsman described the inspection at mutual exchange “unsatisfactory as the missing kitchen door should have been picked up”.

It was these cumulative failures that meant fire safety issues in the resident’s home went unaddressed for a significant period and caused her worry and frustration.

Following the investigation, the landlord has agreed to review both its mutual exchange policy and its complaint-handling process, as well as making it easier for staff to identify when a resident has a vulnerability.

Tracey Lees, chief executive at Wandle, said: “We respect the ombudsman’s findings, which are published in today’s report. We have apologised unreservedly to the tenant affected by this case, and are fully complying with our obligations in line with the determination and recommendation.

“Extra measures and procedures have been amended to ensure that this does not happen again, and we are committed to learning from feedback to continually improve our services for residents.”

FIRE SAFETY REGULATIONS 2022:

WHAT YOU SHOULD BE AWARE

OF

New Fire Safety (England) Regulations are coming into force on 23 January 2023.

The fire safety team at law firm, Addleshaw Goddard, explain the background, what fire safety professionals need to be aware of and the challenges ahead.

The Government continues to implement new legislation following the Hackett review and Grenfell Tower Inquiry. This has resulted in amendments to the existing Regulatory Reform (Fire Safety) Order 2005 (Fire Safety Order) which governs day to day fire safety.

The Fire Safety Act 2021 (FSA 2021), came into force in England in May 2022 and is now fully operational in both Wales and England.

Legislation-FireSafety-20Amidst the publicity associated with the passage into law of the Building Safety Act and the significant challenges it imposes for all operating in the built environment sector, it is important to note that there are also very challenging new fire safety regulations – the Fire Safety (England) Regulations 2022 (Fire Safety Regulations) – which are coming into force on 23 January 2023.

The Fire Safety Regulations apply to multi-occupied residential buildings in England only and impose rules for;

• non-high rise buildings – for example, fire safety instructions must be provided to residents

• buildings over 11 metres – for example, annual checks of fire doors must be carried out

• and buildings over 18 metres – for example, floor plans must now be provided to Fire and Rescue Services.

The Fire Safety Act (FSA) 2021

The FSA 2021 clarifies the scope of the Fire Safety Order in respect of multioccupied residential buildings, to make clear it applies to the structure,

external walls (including cladding, windows, doors and balconies) and individual flat entrance doors between domestic premises and the common parts.

This means that fire risk assessments should be reviewed and updated where necessary to ensure that control measures are put in place to ensure that the building can be occupied safely.

The FSA 2021, and associated regulations, will provide a clearer path for enforcement action and prosecution against any Responsible Person who fails to comply with its obligations. Penalties for offences under fire safety legislation include unlimited fines and/or imprisonment for senior individuals within a business.

Average fines for fire safety offences have risen sharply in the aftermath of Grenfell.

Do the Fire Safety Regulations apply to your building?

The new regulations apply to existing multi-occupied buildings with two or more sets of domestic premises, with

various duties applying to buildings of differing heights.

While the legislation will also apply to new buildings when completed, it should also be noted that the Government has updated the Building Regulation’s guidance, Approved Document B to meet the recommendations of the Grenfell Tower Inquiry. This means such buildings face enhanced obligations, and that the Building Safety Act introduces a much tougher building regulations process which will apply in late 2023 to multi-occupied residential buildings that are 18m, or seven storeys or more.

Are you a Responsible Person (RP)?

The concept of a “Responsible Person” is not a new one. The Fire Safety Order already places several duties on the Responsible Person. In the context of the New Regulations, the Responsible Person is the person who is responsible for the safety of themselves and others who use a regulated premises.

This is usually a building owner, but in residential buildings, will include any other person in control

of the common parts or exterior of premises.

New duties for the Responsible Person

The Fire Safety Regulations creates the following new duties for the Responsible Person:

1. For multi-occupied residential buildings with two or more sets of domestic premises, the Responsible Person will be required to provide:

relevant fire safety instructions to residents, including instructions on how to report a fire, and what a resident must do once a fire has occurred, based on the evacuation strategy for the building

• residents with information relating to the importance of fire doors in fire safety

2. For residential buildings above 11m, the Responsible Person will be required to:

provide fire safety instructions and fire door information

• undertake annual checks of flat entrance doors and quarterly checks of all fire doors in the common parts.

3. For residential buildings of at least 18m or seven or more storeys, the Responsible Person will be required to:

provide fire safety instructions, fire door information and undertake fire door checks

• install and maintain a secure information box in the building, which must contain the name and contact details of the Responsible Person and hard copies of the relevant floor plans

provide up to date electronic floor plans for the local Fire & Rescue Service and store a copy in the Information Box

send information regarding the design and materials in the external wall to the Local Fire and Rescue, together with details of any risks and mitigating steps taken

• undertake monthly checks on firefighting lifts, evacuation lifts and check the functionality of other key pieces of firefighting equipment. Defects will need to be reported to the local Fire and Rescue Service as soon as possible if the fault cannot be fixed within 24 hours. Records of the outcome of checks will need to be available to residents.

install signage that is visible in low light or smoky conditions. The signage in stairwells must identify the relevant flat and floor numbers.

Fire Safety (England) Regulations 2022: Practical considerations

“When reviewing internal or external expertise consideration should be given to whether the individual or organisation has the necessary technical expertise to evaluate and communicate the relevant control measures, and particularly to determine technical compliance and to devise controls. In our view, increasingly attention will be paid to whether individuals carrying out risk assessments and identifying control measures have recognised industry accreditations.”

If you own, manage or operate from a building you are likely to be a Responsible Person. If so, you should carefully consider whether the obligations under these Regulations apply to you.

Where you rely on third-party managing agents they will need to be aware of the duties imposed by the Fire Safety Regulations and you must ensure they are obliged to and are in a position to action the new requirements, noting that the Regulations are criminally enforced and that the duties they create are non-delegable, meaning you may still face prosecution if things go wrong.

Industry opinion has voiced its concern regarding the capacity of the building safety industry to be able to provide sufficient resource

to implement the new checks and reviews required under the Fire Safety Regulations and other recent changes to fire safety legislation. Thought should be given to the availability, and competency, of personnel when making plans to action requirements of the Fire Safety Regulations.

Given the current and forthcoming requirements of the Building Safety Act (which include the management of “building safety” risks, including fire safety), in addition to the existing requirements of fire safety law, consideration should also be given to ensuring competence for existing and future requirements.

When reviewing internal or external expertise consideration should be given to whether the individual or organisation has the necessary technical expertise to evaluate and communicate the relevant control measures, and particularly to determine technical compliance and to devise controls. In our view, increasingly attention will be paid to whether individuals carrying out risk assessments and identifying control measures have recognised industry accreditations.

Examples such as membership of accredited schemes such as NAFRAR or FRACS, and compliance with the latest technical guidance and British Standards, such as PAS 9980, should all be considered when looking for evidence of competence. Competence should be monitored as standards evolve to ensure those engaged remain competent, although if (as appears to be expected) there is a shortage of accredited competent individuals flexibility may have to be employed in assessing competence in the short term – for example by reference to experience rather than formal accreditations.

Owners and duty holders should also be aware of the potential costs following on from the Fire Safety Regulations. For example, if during a check of firefighting equipment, it is found to fall short of contemporary fire safety standards, it is likely the responsible person will be advised to replace the equipment. Careful consideration should be given to who bears relevant responsibilities for costs under the relevant leases.

Systems need to be in place by 23 January 2023 to ensure ongoing compliance with the Fire Safety Regulations.

Artificial Plants & Trees for Businesses

At Just Artificial, we work with interior designers, decorators, set dressers, architects and more to set your premises apart from the rest. Our artificial plants, flowers, and trees are highly realistic to look and touch, as well as being durable and attractive.

Our master craftsmen construct each bespoke order with painstaking care and attention, to create an exceptionally ‘real’ artificial showpiece, and we offer bespoke solutions to suit the needs of your space, business and tastes.

Whether you need simple plants and trees that don’t need tending to or you’re going for a full artificial landscape with turf, hedges and more, we have existing products and the capacity to create custom designs for any need and budget.

We’ll offer a no obligation quote to help you plan your projects and we can tailor our service to ‘fir’ your needs.

Full Support

Whatever your choices, we have the design experience and know-how needed to make you stand out. We can work with your design to make your premises look incredible, whatever the space and whatever the industry. We can even help you develop the design, drawing on years of experience.

Call us today on 01524 858888 or email sales@justartificial.co.uk –Browse our Web Store online for our full stock range and more info on our bespoke solutions on offer.

www.justartificial.co.uk

Who Have We Supplied?

Major companies in many industries including ITV, BBC, Channels 4 and 5, Mulberry, Innocent Drinks, Monsoon, Bella Italia, Tescos, Big Brother, The Only Way is Essex, Coronation Street, Dancing on Ice, Park Resorts, Volkswagen, and more.

We’ve also sold to house builders, zoos, hotels, restaurants, shopping centres, theme parks, colleges and schools, cruise ships, theatres… the list goes on! We have tens of thousands of satisfied customers in the UK, in Europe, and across the World.

We can provide offers for procurement managers and corporate buyers on bulk orders and for trade, to help you finalise your design. Our quotes are no obligation - so call us today. We look forward to working with you!

2023

‘Slow living’ is the antithesis to fast fashion, food and homewares.

Our world is changing at a pace never seen before, and there is a global consensus that we cannot continue consuming the way we have been. The lifestyle changes initially forced upon us during the pandemic have somewhat remained; we are now living hybrid lifestyles where people expect more out of their homes. We are facing fatigue from the rapid pace of changing trends, and consumers are looking to buy once and buy better.

This ethos of consuming more mindfully and consciously will seep into all aspects of our daily lives, from food to laundering our clothes to the purchases we choose to make. Now, consumers are actively educating and arming themselves with knowledge about how to best store their food, avoid waste, consume mindfully, and prolong the life of their belongings. Here are some of the ways we forecast this trend will manifest in the home:

Washing and clothing

A move away from overconsumption and fast fashion has spurred on the slow fashion movement. Consumers are also being more selective with their clothes, opting to build capsule wardrobes out of

FISHER & PAYKEL SHARES 2023 ‘SLOW LIVING’ APPLIANCE FORECAST

key staple pieces. Further, many people now look to shop with sustainable and ethical brands whilst caring more for what they already have. One way to do this is by being more careful when laundering clothing. Washing laundry on colder temperatures, avoiding abrasive fabric softeners, and avoiding hanging knitwear are all small actions people can take to keep their garments looking brand new.

Food

According to the Food Standards Agency, food waste is a top concern for British consumers. UK households throw away 4.5 million tonnes of food every year, equating to £700 of groceries for the average family. Further to the impact throwing away spoiled food has on our bank accounts, there are also environmental ramifications – food waste emits tonnes of greenhouse gases.

With people looking for affordable and easy solutions which they can implement

without incurring additional costs, they are educating themselves about the best ways to do so. Composting waste, freezing leftovers and fresh ingredients, finding new ways to cook with vegetables – these all demonstrate how resourceful consumers are becoming. As the conversation surrounding food preservation continues, consumers might be surprised to learn how they can do this when they start researching… It’s not just a case of having a cold fridge, but how humidity and temperature can affect this too.

Energy Efficiency

Energy efficiency is quickly becoming the top consideration when it comes to purchasing a major domestic appliance. Growing consciousness for the health of our planet is playing an increasing role in our purchasing decisions. Now, more people are making eco-conscious decisions by looking at the energy and water efficiency ratings of the appliances before they buy.

In

we expect to see consumers embracing the ‘slow living’ movement as we become more aware of the benefits that more conscious choices have on our lives, surroundings, and the planet.

Energy labels are a useful indication of how efficient an appliance is, how much water it uses and how quiet it is – enabling us to choose the most energy efficient products for our homes.

Sustainability

On the continued vein of reducing our impact on the environment, our connection with the land around us has grown. Efforts to be sustainable are more important than ever, but it is vital that brands help to do their bit; the onus all too often ends up on consumers.

Respect for our environment is something that is integral to us and is woven through any change we make. There is too much suffocation and noise of endless new tech which is why we are working to improve our existing product offering to offer lasting products that stand the test of time. Our products are also designed to suit a wide range of kitchens, so that they don’t pass with trends, they are intended to be part of a kitchen than lasts.

With the rise in fast homewares as high street brands emulate popular styles, it is imperative that retailers avoid overmanufacturing and instead invest in sustainable technology, use recycled or recyclable materials and review their supply chain for the most ethical practices, as well as endeavouring to produce long-lasting, highperformance products to reduce the need to send anything to landfill.

As a company, we’re committed to a sciencebased goal of carbon net zero. Achieving net zero will require fundamental changes across our business and the effort of our global team, and we believe we need to act fast.

It is encouraging to see so many consumers taking matters into their own hands, and doing what they can no matter how small the action. In 2023, we will continue to strive to do our part, and encourage other brands to do the same.

SPOT ON LIGHTING AND FURNITURE PACKS FROM DESIGNER CONTRACTS

Designer Contracts, one of the UK’s leading suppliers to the new build interiors sector, has spiced up and simplified its furniture and lighting packs for the turnkey solutions market.

The company has reinvented its furniture packs with two clear new offers: Solution, a pack curated and designed to meet the requirements and expectations of landlords, first-time-buyers, student accommodation and investors; and Elevate, a developer pack offering a more aspirational range of furniture. Its lighting pack, Glow, has also been totally refreshed.

Said commercial director Louise Walters: “We wanted to completely update our offer and around 80% of the furniture packs comprise totally new pieces. The lighting pack has also been comprehensively reviewed to include some really contemporary lines.”

Solution brings a touch of Scandinavian simplicity to entry level rentals with a modern inventory of lounge, dining, bedroom and home office furniture along with linens and basic kitchen equipment included in the packs.

Elevate takes things to a more stylish level with pieces designed to appeal to developers furnishing higher market, aspirational accommodation. It also covers a comprehensive range of bedding and kitchen equipment including an ironing board, 12-piece dinner service and selection of wine and drinks glasses.

Offering spot on fashion choices for lighting around the home is Glow which meets every need from spotlights to funky cluster options, pendants, light bars and crystal-style clusters.

Said Louise: “The idea is to provide landlords and investors with easy solutions to furnishing rental properties across the market, whatever their requirements and size of property.”

Designer Contracts is the UK’s largest flooring contractor and operates across 15 UK regional facilities. As well as flooring, the company provides blinds and curtains, furniture and lighting, and operates a show home interior design services division.

The Stay Boulevard Nisantasi Opens New Luxury Spa in Istanbul

THE CARBON-NEUTRAL BOUTIQUE HOTEL OFFERS THE PERFECT WINTER WELLNESS RETREAT COMPLETE WITH AUTHENTIC TURKISH BATH

Part of Türkiye’s first independent carbon-neutral hotel group The Stay Hotels, The Stay Boulevard Nisantasi in Istanbul offers guests the perfect winter wellness retreat for 2023. The new 1220 sqm Stay Spa spans an entire floor with nine treatment rooms, an indoor spa pool, adjoining hot tub, Turkish bath, and wooden sauna, and using all vegan and organic spa products.

Treatments include the reviving Turkish hammam experience, which cleanses, refreshes and moisturises the body with special herbal soaps and foam, enjoyed

in the dedicated private Turkish bath, complete with white marble and ornate brass taps. For the ultimate indulgence, the combined hammam and massage treatment allows guests to choose from one of the spa’s massage therapies, from traditional Thai combining acupressure and stretching techniques to healing Balinese with deep strokes and energyunblocking Shiatsu.

There’s also a couple’s massage for two to share and relax side-by-side, soothing mother-to-be massages using safely formulated massage

oils and hot stone therapy, to help with sleeplessness and tension. After and in-between treatments, guests can recline on wooden day beds in softly lit relaxation areas and sip a cup of fresh mint tea.

Guests and non-guests can buy spa packages for six, 10 and 20 treatments. Each treatment is 60-minutes long and can be a combination of Traditional Thai Massage, Stay Spa Massage, Deep Tissue Asia, Shiatsu Therapy and Aromatherapy.

The soothing Stay Spa offers the ultimate urban retreat for those looking to wind down after spending a busy day exploring Istanbul’s culture and sights and the chic Nisantasi neighbourhood.

Instagram @thestayboulevardnisantasi

ARMAC MARTIN

Armac Martin set to launch second collaboration with Sophie Paterson

Following on from the success of their first collaboration collection of mirrors last spring, luxury brass hardware and accessories brand Armac Martin and eminent British interior designer Sophie Paterson have teamed up once again to create a collection of bamboo-style hardware.

Aleading name in the luxury interiors industry, Armac Martin has been perfecting their craft since 1929, all from their factory in the heart of England. The fourth-generation family business has seen impressive growth over the last few years with their success most recently recognised in May 2022 when they received the honour of a prestigious Queen’s Enterprise Award for International Trade.

Inspired by one of nature’s most iconic forms, their captivating new collection in collaboration with Sophie Paterson honours the organic beauty of bamboo. The plant, favoured for its innate durability, distinctive appearance and renewable prospects, is an enduring symbol of strength that has inspired design and style throughout history, apparent in an array of pieces from jewellery and textiles to furniture and ceramics.

Speaking of The Grove Collection, interior designer

Sophie shares: “I love the soft and organic silhouette of bamboo, it works so well at softening joinery such as wardrobes or kitchen cabinets. It’s a timeless shape too – since Princess Diana wore a Gucci bamboo handle bag in the 90s, I’ve loved its use in fashion and always wanted to bring that to my interiors.”

Featuring a set of exquisitely crafted cabinet pulls, t-bars and knobs made sustainably from the finest solid brass, Grove is defined by elegant silhouettes and a tactile feel to elevate timeless interiors. A sophisticated choice for dressing rooms, primary bedrooms and kitchens alike, the new collection blends seamlessly into a number of luxury settings.

Available in Armac Martin’s portfolio of signature brass finishes including Sophie’s favourite, satin antique satin lacquered, shop The Grove Collection exclusively online from the 17th of January 2023 at www.armacmartin.co.uk