Pro-face AGP/AST3000 to Hitachi L200 Inverter via Modbus RTU Tested, Trusted, Out-of-the-Box
Modbus Serial Cable
15" 12.1" 10.4"
Pro-face AGP3300-T1
Hitachi L200 Inverter
HMI Motion Control Quick Start Guides
7.5" 5.7" 3.8"
®
Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value: • • • •
Simple, fast installation, 3 step guide with a sample project you can use No PLC required, logic controller is built-in Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Hitachi L200 Inverter. For a full explanation of this project refer to Pro-face America Application Note 1156.
Materials: 1. 2. 3. 4. 5. 6. 7.
AGP3000 Operator Interfaces
Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher Pro-face AGP3000 or AST3000 Series HMI Hitachi L200 Inverter Pro-face CA3-ADPCOM-01 COM1 or CA4-ADPONL-01 COM2 Port Adapter Pro-face CA3-ADPTRM-01 Termination Adapter CAT5e Ethernet Cable (Straight-Through) The Pro-face sample project “APNT1156.zip” available at: https://www.hmisource.com/otasuke/files/appnotes/
Continued on next page
Right Size, Right Technology Solutions
Pro-face AGP/AST3000 to Yaskawa J7 Drive via Modbus RTU Tested, Trusted, Out-of-the-Box
15"
Modbus Serial Cable
12.1" 10.4" 7.5" 5.7"
Pro-face AGP3300-T1
Yaskawa J7 Drive
3.8"
HMI Motion Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value: • Simple, fast installation, 3 step guide with a sample project you can use • No PLC required, logic controller is built-in • Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons • Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Yaskawa J7 Drive. For a full explanation of this project refer to Pro-face America Application Note 1157.
Materials: 1. 2. 3. 4. 5. 6. 7. 8.
Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher Pro-face AGP3000 or AST3000 Series HMI Yaskawa J7 Drive Yaskawa SI-485/J7 Modbus RS485 Adapter Pro-face CA4-ADPONL-01 COM2 Port Adapter Pro-face CA3-ADPTRM-01 Termination Adapter 5-Wire Shielded Cable The Pro-face sample project “APNT1157.zip” available at: https://www.hmisource.com/otasuke/files/appnotes/ Continued on next page
Right Size, Right Technology Solutions
AGP3000 Operator Interfaces ®
Pro-face AGP/AST3000 to Eaton MVX9000 AF Drive via Modbus Tested, Trusted, Out-of-the-Box
Modbus Serial Cable
15" 12.1" 10.4"
Pro-face AGP3300-T1
Eaton MVX9000 AF Drive
HMI Motion Control Quick Start Guides
7.5" 5.7" 3.8"
®
Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value: • • • •
Simple, fast installation, 3 step guide with a sample project you can use No PLC required, logic controller is built-in Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and an Eaton MVX9000 AF Drive. For a full explanation of the project refer to Pro-face America Application Note 1169.
Materials: 1. 2. 3. 4. 5. 6. 8.
AGP3000 Operator Interfaces
Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher Pro-face AGP3000 or AST3000 Series HMI Eaton MVX9000 Variable Frequency AC Drive Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter Pro-face CA3-ADPTRM-01 Termination Adapter RJ-12 cable. The Pro-face sample project “APNT1169.zip” available at: https://www.hmisource.com/otasuke/files/appnotes/ Continued on next page
Right Size, Right Technology Solutions
Pro-face AGP3000 to Altivar Adjustable Speed Drive via Modbus RTU Tested, Trusted, Out-of-the-Box
15"
Modbus Serial Cable
12.1" 10.4" 7.5"
Pro-face AGP3300-T1
Altivar 31 Adjustable Speed Drive
5.7" 3.8"
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value: • • • •
Simple, fast installation, 3 step guide with a sample project you can use No PLC required, logic controller is built-in Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Telemecanique Altivar 31 or 71 Adjustable Speed Drive Controller. For a full explanation of this project refer to Pro-face America Application Note 1163.
Materials: 1. 2. 3. 4. 5. 6. 7.
Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher Pro-face AGP3000 Series HMI with ladder logic programming feature Telemecanique Altivar 31 or 71 Adjustable Speed Drive Controller Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter Pro-face CA3-ADPTRM-01 Termination Adapter Industrial RJ-45 cable The Pro-face sample project “APNT1163.zip” available at: https://www.hmisource.com/otasuke/files/appnotes/ Continued on next page
Right Size, Right Technology Solutions
AGP3000 Operator Interfaces ®
Pro-face AGP/AST3000 to ABB ACS350 VF Drive via Modbus RTU Tested, Trusted, Out-of-the-Box
Modbus Serial Cable
15" 12.1" 10.4"
Pro-face AGP3300-T1
ABB ABB ACS350 Drive
HMI Motion Control Quick Start Guides
7.5" 5.7" 3.8"
®
Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value: • • • •
Simple, fast installation, 3 step guide with a sample project you can use No PLC required, logic controller is built-in Reduce system cost, no need for analog interfaces, eliminate pilot lights and pushbuttons Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and ABB ACS350 Variable Frequency AC Drive. For a full explanation of this project refer to Pro-face America Application Note 1161.
Materials: 1. 2. 3. 4. 5. 6. 7. 8.
AGP3000 Operator Interfaces
Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher Pro-face AGP3000 or AST3000 Series HMI ABB ACS350 Variable Frequency AC Drive ABB FMBA-01 Modbus Adapter Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter Pro-face CA3-ADPTRM-01 Termination Adapter 3 Conductor shielded cable The Pro-face sample project “APNT1161.zip” available at: https://www.hmisource.com/otasuke/files/appnotes/ Continued on next page
Right Size, Right Technology Solutions
Pro-face AGP/AST3000 to Allen-Bradley PowerFlex® 4 VF Drive via Modbus RTU Tested, Trusted, Out-of-the-Box
Modbus Serial Cable
15" 12.1" 10.4" 7.5"
Pro-face AGP3300-T1
5.7"
Allen-Bradley PowerFlex 4 AF Drive
3.8"
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge, a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value: • Simple, fast installation, 3 step guide with a sample project you can use • No PLC required, logic controller is built-in • Reduce system cost, no need for analog interfaces and indicators, fewer push buttons • Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
This document and the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP/AST using GP-Pro EX and an Allen-Bradley PowerFlex® 4 Variable Frequency AC Drive. For a full explanation of the sample project refer to Pro-face America Application Note 1160.
Materials: 1. 2. 3. 4. 5. 6. 7.
Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher Pro-face AGP3000 or AST3000 Series HMI Allen Bradley PowerFlex® 4 Variable Frequency AC Drive Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter Pro-face CA3-ADPTRM-01 Termination Adapter Category 5 shielded 8-conductor cable with a shielded male RJ45 connector The Pro-face sample project “APNT1160.zip” available at: https://www.hmisource.com/otasuke/files/appnotes/ Continued on next page
Right Size, Right Technology Solutions
AGP3000 Operator Interfaces ®
Pro-face AGP/AST3000 to Omron SYSDRIVE JX Series Inverter via Modbus RTU Tested, Trusted, Out-of-the-Box
Modbus Serial Cable
15" 12.1" 10.4" 7.5" 5.7"
Pro-face AGP3300-T1
Omron SYSDRIVE JX Series Inverter
3.8"
HMI Motion Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value: • Simple, fast installation, 3 step guide with a sample project you can use • No PLC required, logic controller is built-in • Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons • Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and an Omron SYSDRIVE JX Series Inverter. For a full explanation of this project refer to Pro-face America Application Note 1173.
Materials: 1. 2. 3. 4. 5. 6. 7.
Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher Pro-face AGP3000 or AST3000 Series HMI Omron SYSDRIVE JX Series Inverter Pro-face CA3-ADPCOM-01 COM1 or CA4-ADPONL-01 COM2 Port Adapter Pro-face CA3-ADPTRM-01 Termination Adapter CAT5e Ethernet Cable (Straight-Through) The Pro-face sample project “APNT1173.zip” available at https://www.hmisource.com/otasuke/files/appnotes/
Continued on next page
Right Size, Right Technology Solutions
AGP3000 Operator Interfaces ®
Pro-face LT3000 CANopen Master to a Telemecanique Altivar 71 Adjustable Speed Drive Tested, Trusted, Out-of-the-Box
CANopen Cable
Pro-face LT3000 with CANopen Master Module
Altivar Adjustable Speed Drive
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
LT3000 Operator Interfaces ®
Differentiating Value: • • • •
Simple, fast installation, 3 step guide with a sample project you can use No PLC required, logic controller is built-in Reduce system cost, no need for analog interfaces, eliminate pilot lights and push buttons Precision high resolution digital control
Applications: • • • •
Conveyors Pumps and fans Packaging equipment Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face LT3000 using GP-Pro EX and a Telemecanique Altivar 71 Adjustable Speed Drive Controller. For a full explanation of this project refer to Pro-face America Application Note 1172.
Materials: 1. 2. 3. 4. 5. 6. 7. 8.
Pro-face GP-Pro EX Screen and Logic Editing software v2.2 or higher Pro-face LT3300 Series HMI Pro-face CA8-CANLT-01 CANopen master module Telemecanique Altivar 71 Adjustable Speed Drive Controller Telemecanique VW3 CAN A71 CANopen adapter The Altivar drive EDS file “TEATV71xyE.eds” where x.y: is the drive software version Standard CANopen network cable with DB9 CANopen bus connectors The Pro-face sample project “APNT1172.zip” available at: https://www.hmisource.com/otasuke/files/appnotes/ Continued on next page
Right Size, Right Technology Solutions
en LT CANop it Master Un