Lock-Tech Architectural Ironmongery by Jeremy Ballantine

Door

Hardware.

INTRODUCTION Established in 1933 as Swansea Timber & Plywood Co Ltd, Lock-Tech evolved as the Architectural Ironmongery division of the firm. Despite its name, this company has its roots in Architectural Ironmongery almost from instigation, having originally supplied Builders and Cabinet Ironmongery to local Builders, Cabinet Makers and Joiners Shops. Now under the control of the third generation of the Harvey family, it has a structured management team and dedicated staff, all who have a commitment to honing their skills by continued training and development. Lock-Tech now accounts for more than 70% of the Companyâ&#x20AC;&#x2122;s sales and such has been the success of the Lock-Tech name that the Company protected its interest by successfully registering it as a Registered Trademark in the 1990â&#x20AC;&#x2122;s. Staffed by members of the Institute of Architectural Ironmongers, backed up by an extensive stock, we are able to provide off the shelf solutions to satisfy the most discerning specification. We have a wide experience of specialist requirements gained by advising and supplying our product ranges to many Architects, Local Authorities, Institutions, Schools, Colleges, Hospitals, Public Utilities, Private Companies and Clients, over many years.

INDEX Page 3 - Door Hinges Page 7 - Locks Page 15 - Access Control Page 21 - Stainless Steel Page 28 - Aluminium Page 31 - Door Closers Page 37 - Kickplates Page 39 - Escape hardware Page 43 - Signage Page 49 - Coloured hardware Page 58 - Shelving Page 61 - Anti-Ligature Page 70 - Finger Protection Page 73 - Thresholds. Seals & Intumescents Page 76 - Specials

Door

Hinges.

Heavy Duty Butt Hinge Three knuckle with intergral bearings. 100 x 88mm hinge suitable for door leaves upto adjusted door weight of 120kg maximum. Minmum door thickness 44mm. Square & Radius versions available. Suitable for use on Fire doors. Certifire approved - CF209.

Part No: ROYH102.0.ZP / BZP

Best Seller

LO CK -TE

Standard Duty Ball Bearing Hinge

Finishes available. SSS. PSS. BZP. COLOUR COATED.

102 x 76mm hinge suitable for door leaves upto adjusted door weight of 120kg maximum. Square & Radius versions available. Suitable for use on Fire doors. Certifire approved - CF339 Finishes available. SSS. PSS.

Part No: 1SS19HBB102 / SSS

Security Standard Duty Ball Bearing Hinge Security Standard duty ball bearing hinge.

Thrust Bearing Pivot set Trust bearing pivot set to suit doors up to 80kg. Double action door pivot set which allows the door to be opened outwards in a emergency situation. To be used in conjunction with Emergency release door stop Finishes available. SSS.

LO CK -TE

Emergency Release Door Stop.

Part No: 1SS19TBPS

Emergency release door stop which allows the door to be opened outwards in a emergency situation when depressed. To be used with Pivot sets. Push in & hold back facility, simple release by pressing the centre with a pen point. Finishes available. SSS. Part No: 1SS19ERDS

Emergency Release Door Stop.

Emergency release door stop which allows the door to be opened outwards in a emergency situation when depressed. To be used with Pivot sets. Finishes available. SSS. Part No: ROYH131-105SSS

Hospital Tip Standard Duty Ball Bearing Hinge Security Standard duty ball bearing hinge. 102 x 76mm hinge suitable for door leaves upto adjusted door weight of 120kg maximum. Suitable for use on Fire doors. Certifire approved - CF339 Only available in Satin Stainless Steel.

Standard duty ball bearing hinge.

LO CK -TE

Wide Leaf Ball Bearing Hinge

Part No: EUR1433HT/13SSS / SSS

102 x 102mm hinge suitable for door leaves upto adjusted door weight of 120kg maximum. Suitable for use on Fire doors. Finishes available. SSS. PSS. Part No: 1SS19HBB102/4 / SSS

Intumescent hinge pads for hinges

Intumescent hinge pads. 100 x 30mm hinge pads self adhesive For use with 100 x 76mm EN1935 class 13 ball race hinges. These should always be used when fitting hinges to a fire door. Sold in packs of six, which is enough for three hinges. Part No: MANIPAD30

Door

Locks.

Sash Lock

Best Seller Euro profile sashlock. Backset: 60mm Lockcase: 150 x 85mm Centres: 72mm Available in square or radius faceplates. Finishes: PVD or SSS.

Best Seller

LO CK -TE

Dead Lock

Part No: 3SS22SL / SSS

Euro profile deadlock. Backset: 60mm Lockcase: 150 x 85mm Available in square or radius faceplates. Finishes: PVD or SSS. Part No: 3SS22DL / SSS

Bathroom Lock

Best Seller

5mm follower for bathroom fitting. Backset: 60mm Lockcase: 150 x 85mm Centres: 78mm Available in square or radius faceplates. Finishes: PVD or SSS. Part No: / SSS

Latch

Best Seller Backset: 60mm Lockcase: 150 x 85mm Available in square or radius faceplates. Finishes: PVD or SSS.

Best Seller

LO CK -TE

Nighlatch Case

Part No: 3SS22ML / SSS

Euro profile nightlatch case. Backset: 60mm Lockcase: 150 x 85mm Centres: 72mm Available in square or radius faceplates. Finishes: PVD or SSS. Part No: 3SS22NL / SSS

Escape Sashlock

Best Seller

Escape Euro profile sashlock, split follower complete with spindle. Backset: 60mm Lockcase: 150 x 85mm Centres: 72mm Available in square or radius faceplates. Finishes: PVD or SSS. Part No: 3SS22EL / SSS

Sash Lock EASI-T BATHROOM LOCK 5mm FOLLOWER 76mm SSS Domestic Sash lock. EASI-T mortice Sash lock. For use with Euro profile cylinder. Bolt through lock (38mm bolt holes) to suit bolt together door handles Available in a 64mm or 76mm case

LO CK -TE

Dead Lock

Part No: EURESS5030SSS

EASI-T EURO CYL DEADLOCK CASE 76mm SSS Domestic Dead lock. EASI-T mortice Dead lock. For use with Euro profile cylinder. Available in a 64mm or 76mm case

Part No: EUREDS5030SS

Bathroom Lock

EASI-T BATHROOM LOCK 5mm FOLLOWER 76mm SSS Domestic Bathroom lock. EASI-T mortice bathroom lock. For use with snib turn and release systems. Bolt through lock (38mm bolt holes) to suit bolt together door handles Architectural quality, this bathroom lock has an adjustable spring to suit, sprung or unsprung lever handles. Available in a 64mm or 76mm case Part No: EURBAS5030SSS

DEADLOCKS

Union 2177 Deadlock 3 Lever Mortice Deadlock. The 2177 Mortice Lock is for use on timber doors hinged on the left or right Keys are suitable for use on doors up to 54mm thick May be supplied keyed alike.

Part No: UNI2177SC3 / 76mm SC

Union 2134 Deadlock

LO CK -TE

5 Lever BS3621:2007 Mortice Deadlock.

Available in either a 65mm or 76mm case. Finishes: SC or PL

For use on timber doors hinged on the left or right. Deadbolt locked or unlocked by key from either side Extended 20mm deadbolt for secure positive deadlocking and additional resistance against attack 2134E can be keyed alike with 2234E Keys are suitable for doors up to 54mm thick Finishes: SC or PL

Part No: UNI2134ESC80 / 80mm SC

Union 2169 Euro Deadlock

Euro Profile Small Case Deadlock - 2169.

For use on timber doors hinged on the left or right. Also suitable for steel & composite doors - special fixings required. Deadbolt is locked or unlocked by euro profile Cylinder Available in either a 65mm or 76mm case. Finishes: SC or PL Part No: UNI2169SC3 / 76mm SC

Union 2149 Euro Deadlock For use on timber doors hinged on the left or right. Also suitable for steel & composite doors - special fixings required. Deadbolt is locked or unlocked by euro profile cylinder Available in either a 65mm or 76mm case. Finishes: SC or PL

LO CK -TE

Union 2349 Euro Nightlatch

Part No: UNI2149SC3 / 76mm SC

For use on timber doors hinged on the left or right.

Latch bolt withdrawn by euro profile cylinder from outside and sprung lever handle or separate turn from inside Latch bolt is held in the withdrawn position by use of special key supplied Reversible latch bolt Cylinder options - single cylinder or key and key / Cylinder & keys NOT supplied. Latch bolt is automatically locked against end pressure by the anti-thrust bolt Part No: UNI2149SC3 / 76mm SC

Yale 81 Features: Nightlatch with rollerbolt for push/pull action making it ideal to prevent accidental lock out - Ideal for communal entrance doors. Key operation from outside. Turn handle operation from inside.

LO CK -TE

Yale 82

Part No: YAL81PB

Features:

Deadbolt operation only with no intermediate latching action. Key operation from the outside. Turn handle operation from inside. Part No: YAL82PB

Yale 77

Features:

The Original Yale Lock. Classic styling with deadlocking snib. Key operation fron the outside and knob handle operation from inside. Article numbers prefixed "P" are visi packed, articles prefixed "B" are boxed. Part No: YAL77PB

At lock Tech we now maunfacture all our own masterkey suites Rim thus giving our contractors / end users a better service, for additional Keys & Cylinders KEYED ALIKE PASSING GROUPS The term simply means a single key operating a number of locks or cylinders. All are made to exactly the same differ. This is sometimes described in a variety of ways: • Alike change • Keyed alike Single Threaded • Locks to pass • Keys to pass The following illustration describes how a "pass group" system works. Note different shapes of cylinder can be made to the same key:

MASTER KEYED SUITES The simplest form of master keying Cylinder is when a & Turn number of locks or cylinders are all operated by their own individual keys, but are additionally operated by one control key known as the master key which will operate every lock within the suite. Imagine a small building in which there are 4 internal office doors. A small company occupies the building and the owner requires separate keys for the 4 office doors but a single key to operate all of the doors. A simple master keyed suite as the following illustration satisfies this requirement:

Single GRAND MASTER KEYED SUITES Many people regard these as being more complicated than master keyed suites. Some can be, however most are not. Grand master keyed suites are a series of master keyed suites linked together by a higher controlling key - the grand master key. The chart which is drawn as a family tree, this is an easy way to understand how the different keys and sub suites are linked together by the overall grand master key.

Access Control.

XS4 Narrow XS4 PROXIMITY FURNITURE SLIM VERSION SSS The XS4 narrow version are specially designed to fit on most European doors. This stand alone unit can work as a simple self programmable system that needs no computor to manage it, though to a highly capable mid-range ROM system upto a the high performance data on card technology system that allows you to control all the doors in an entire building from a single PC.

XS4 PROXIMITY FURNITURE WIDE VERSION SSS

LO CK -TE

XS4 Wide

Part No: LKAIE9450

The XS4 wide version are specially designed to fit on most European doors. This stand alone unit can work as a simple self programmable system that needs no computor to manage it, though to a highly capable mid-range ROM system upto a the high performance data on card technology system that allows you to control all the doors in an entire building from a single PC. Part No: LKAIE9650

XS4 Wall Reader

XS4 WALL READER PROXIMITY MODULAR & PPD SOCKET.

Salto modular wall readers, read & write information on contact less smart cards.

Part No: LKAIWRM9001

XS4 Cylinder & Turn MIFARE READ / WRITE GEO CYLINDER & TURN 35 x 35mm. (Other sizes are available). Fully intergrated with the Salto XS4 platform, GEO is a versatile, cost effective solution and its compact size and easy installation makes it ideal electronic locking system for almost any type of door.

LO CK -TE

XS4 Locker Lock

Part No: LKAIG9E2035S35

XS4 LOCKER LOCK MIFARE XS4-Locker is a locker lock designed to bring all the advantages of an electronic access control for lockers & cabinets. All electronic & mechanical components are located inside to enhance the security against any vandalism or manipulation. Part No: LKAIL9050A20

Lock-Tech.

There are a variety of cards and fobs available. At Lock-Tech we are also able to print your own required logo onto the cards. Please ask our LOCK TECH SYSTEMS for more information. Tel: 01792 720240

1000 Series Features: Single access code—one easy to manage code for all users. Lock is easily programmed via keypad without removing lock from the door. Factory-handed; not field reversible. Small format interchangeable cores, large format removable cores. Locking Device Options:

Features

LO CK -TE

Best Seller

Part No: UNC1011LLSC (Left hand) Part No: UNC1011LRSC (Right hand)

Single access code—one easy to manage code for all users. Lock is easily programmed via keypad without removing lock from the door. Factory-handed for left hand doors; easily field reversible. Small format interchangeable cores, large format removable cores. Locking Device Options:

Part No: UNC1011SC

3000 Series

Features

Single access code—one easy to manage code for all users Lock is easily programmed via keypad without removing lock from the door. Non-handed; required drive assembly is factory handed—not field reversible. Accepts Maximum Security (MS) mortise cylinders; can be used to override the lock combination and gain access using a key. Allows facilities to initiate or maintain a master-keyed security system (keyed alike or keyed differently). Locking Device Options: Part No: UNC3001SC (Locking unit) Drive assembly & cylinder sold seperately.

CL500 Lock

Best Seller

CL510 Lock Range is ideal for use in the home, school, office, hospital environments.

Heavy duty Codelock PVD weather resistant, low maintenance finish Full size lever handles Easy code change as often as required Code Free option available Mortice lock and mortice latch functions To change the code the lock must be taken off the door Part No:

CL600 Lock Range is ideal for use in the home, school, office, hospital environments.

LO CK -TE

CL600 Lock

Unique on door code change Quick Code Lock does not need removing from door to change code Front cylinder change Heavy duty Codelock High number of code combinations – 8000 + Full size lever handles Code Free option available Mortice lock and Mortice latch functions PVD weather resistant, low maintenance finish

CL600 Lock

CL4000 Locks are of a stylish and contemporary design. Fully programmable on the door via the keypad with a multiple range of functions making them particularly suitable for use in health, educational, commercial and residential environments. Allows up to 80 User Codes 4, 5 or 6 digits long On door programming via Master (programming) Codes Allows up to 10 One-Time User Codes to be entered Locked • / unlocked •, LED indicator option PVD weather resistant, low maintenance finish Over 200,000 operations from 4 x AA cells (supplied) Tamper time out and low battery warning Connections for remote release by reception desk button, and alarm release included Code Free entry mechanically by key or electronically from the keypad.

Mini Electro-magnet Single door mini electro magnetic lock. Suface mounted unit Fail unlocked Holding force 250kg Voltage 12V DC / 24V DC Current 12V DC = 0.48A 24V DC = 0.24A

LO CK -TE

Part No: ALDAS8529

Stainless Steel Hardware.

Lever on Rose

Best Seller

Lever on screw on rose satin stainless steel. 19mm diameter lever on round sprung screw on 50 x 6mm rose. Grade 316 Stainless Steel. Dimesional sizes meet the requirements of BS EN 8300.

LO CK -TE

Lever on Rose

Part No: EURSW123SSS

Designer Lever on screw on rose satin stainless steel. Designer lever on round unsprung screw on 50 x 6mm rose. Grade 316 Stainless Steel. Dimesional sizes meet the requirements of BS EN 8300. Part No: EURSW141SSS

Lever on Rose

Euro Escutcheon Euro profile 50mm x 6mm screw on rose escutcheon. Grade 316 Stainless Steel Supplied with screw fixings ONLY.

Also available in the following profiles: Oval Lever Lock (Key) Blank Part No: EURSW102SSS

LO CK -TE

Less able Turn & Indicator.

Less able turn & indicator 50mm x 6mm screw on rose Grade 316 Stianless Steel. Supplied with screw fixings ONLY. Small indicator.

Part No: EURSW105ISSS

StandardTurn & Indicator.

Standard turn & indicator 50mm x 6mm screw on rose Grade 316 Stianless Steel. Supplied with screw fixings ONLY. Small indicator.

Part No: EURSW106ISSS

Return Lever on Rose Lever on round 52mm x 4mm unsprung rose. Available in Polished or Satin Stainless Steel. Supplied complete with bolt through fixings and Heso Spindle.

LO CK -TE

Straight Lever on Rose

Part No: 4SS19LHRU / SSS

Straight Lever on round 52mm x 4mm unsprung rose. Available in Polished or Satin Stainless Steel. Supplied complete with bolt through fixings and Heso Spindle.

Euro Profile Escutcheon Euro Profile Escutcheon 52 x 4mm. Available in Polished or Satin Stainless Steel. Supplied complete with wood screws. Bolt through fixings available.

LO CK -TE

Key Profile Escutcheon

Part No: 4SS19EE / SSS

Key Profile Escutcheon 52 x 4mm. Available in Polished or Satin Stainless Steel. Supplied complete with wood screws. Bolt through fixings available.

Blank Profile Escutcheon

Blank Profile Escutcheon 52 x 4mm. Available in Polished or Satin Stainless Steel. Supplied complete with wood screws. Bolt through fixings available. Part No: 4SS19EB / SSS

Grade316 is also available on moststainless steel products

D-Shaped Pull Handles

Best Seller

Pull Handles 19mm diameter, available in the following centre sizes: 150mm / 225mm / 300mm 425mm / 450mm / 600mm Available in grade 316 & grade 304 stainless steel

Part No: 4SS19PBF300 / grade 304 - 300mm centres.

LO CK -TE

T-Shaped Pull Handles

Pull Handles 19mm diameter, available in the following centre sizes: 225mm or 300mm

Grade 304 stainless steel Part No:

Mitred Pull Handle

Pull Handles 19mm diameter, available in the following centre sizes: 300mm Grade 304 stainless steel Part No:

Floor mounted Door Stops

Oval floor mounted door stop. Base 44mm diameter. 25mm high.

LO CK -TE

Floor mounted Door Stops

Part No: 6SS19DSFO / SSS

Pedastalfloor mounted door stop. Base 36mm diameter. 40mm high.

Part No: 6SS19DSFP / SSS

Skirting or Wall mounted Door Stops

Concealed fixed skirting mounted door stop.

Part No: 6SS19DSS / SSS

Aluminium Range.

Return Lever on Rose

Best Seller

Safety Lever 19mm on sprung rose Satin Anodised Aluminium Lever handle is BS8300 compliant.

Part No: EURLRSS9001SAA

LO CK -TE

Straight Lever on Rose

Straight Lever 19mm on sprung rose Satin Anodised Aluminium

Part No:

Curved Lever on Rose

Curver Lever 19mm on sprung rose Satin Anodised Aluminium

Part No:

Euro profile Esctcheon Euro Profile Escutcheon. Supplied complete with wood screws.

LO CK -TE

Less able Thumbturn & Release

Part No: EURESE9005SAA

Less able thumbturn & Release with indicator Satin Anodised Aluminium. 5mm spindle complete with screw fixings.

Part No: EUREST9025SAA

Standard Thumbturn & Release

Standard thumbturn & Release with indicator Satin Anodised Aluminium. 5mm spindle complete with screw fixings.

Part No: EUREST9005SAA

Door

Closers.

TS 1000

Overhead rack and pinion door closer for light internal doors, for standard and transom mounting, for DIN left and DIN right doors up to 950mm wide. A mounting plate is available for doors where direct mounting is not possible.

Part No: GEZTS1000S / Silver

LO CK -TE

TS 1200

Overhead rack and pinion door closer for standard and transom mounting, for DIN left and DIN right doors. With adjustable closing speed and latching action. EN 2/3 closing force for door leaf width up to 950mm. Supplied with ABS Contract cover and parallel arm bracket. Part No: GEZTS1200S / Silver

TS 1500

Best Seller

Overhead rack and pinion door closer for light internal doors, for standard and transom mounting, for DIN left and DIN right doors up to 1100mm wide. A mounting plate is available for doors where direct mounting is not possible. Part No: GEZTS1500 / Silver

TS 2000

Best Seller

Universal surface mounted rack and pinion door closer with flat form arm for doors up to 1250mm, with variable closing force, latch action and closing speed adjustment on the front of the mechanism.

Part No: GEZTS2000S / Silver

LO CK -TE

TS 4000

Universal surface mounted rack and pinion door closer EN 1-6 in accordance with EN1154 with flat form arm for doors up to 1400mm wide. Adjustable closing force with optical strength indicator, adjustable closing speed, adjustable back check and latching action via the arm. All valve adjustments on the front of the mechanism. Part No: GEZTS4000S/BC/VP / Silver

TS 4000s

Universal surface mounted rack and pinion door closer EN 1-6 in accordance with EN1154 with flat form arm for doors up to 1400mm wide. Adjustable closing force with optical strength indicator, adjustable closing speed, adjustable back check, valve adjustable latch action and delayed closing action from 30 seconds. All valve adjustments on the front of the mechanism. Part No: GEZTS4000S/BC/VP/DA / Silver

TS 4000E

Universal surface mounted rack and pinion door closer with electro-hydraulic hold-open device for single action right and left hand closing doors up to 1400mm wide.

Part No: GEZTS4000E/S / Silver body only Part No: GEZTS2/4000AS/S / Silver arm

LO CK -TE

TS 4000EFS

Power size 1-6 in accordance with EN 1155 and suitable for use on smoke and fire-proof doors.

Universal surface mounted rack and pinion door closer with free swing-link arm and electro-hydraulic holdopen device for single action right and left hand closing doors up to 1400mm wide.

Power size 1-6 in accordance with EN 1155 and suitable for use on smoke and fire-proof doors. Part No: GEZTS4000E/S / Silver body only Part No: GEZTS4000EFS/AS / Silver arm

TS 3000

Best Seller

Surface mounted eccentric rack and pinion door closer with guide rail arm for doors up to 1100mm, with adjustable closing force, hydraulic latch action, closing speed and eccentric pinion for easier opening.

Part No: GEZTS3000S / Silver

LO CK -TE

TS 5000

Surface mounted eccentric rack and pinion door closer with guide rail arm for doors up to 1400mm wide, with adjustable closing force, optical strength indicator, back check, hydraulic latching action and eccentric rack and pinion for easier opening. All adjustments are made on the front of the mechanism. Part No:GEZTS5000/S / Silver

TS 3000B

Surface mounted Boxer cam-action door closer with guide rail suitable for single action right and left closing doors up to 1100mm wide. Part No: GEZTS3000B/S / Silver

TS 550 Floor Spring. TS550

Floor-mounted closer TS550 for leaf widths up to 1400 mm and high leaf weights of up to 300 kg For use with fire and smoke doors Closing force infinitely variable EN 3-6 â&#x20AC;&#x201C; an advantage with wind loads or heavy door leaves. All settings accessible from above and convenient to implement whilst installed. Durability tested in over 500,000 opening and closing cycles

LO CK -TE

TS 550 Electromagnetic Floor Spring.

TS550E

Floor-mounted closer TS550 for leaf widths up to 1400 mm and high leaf weights of up to 300 kg Floor spring must be connected to a power supply, to allow the door to be held open. Operating Voltage 24V DC. EN1155 All settings accessible from above and convenient to implement whilst installed.

Boxer Concealed Closer.

Single or Double action closer. Integrated door closer with guide rail for single and double action doors. Closer fully intergrated into door leaf. EN2-4 Maximum door weight 130kg, minimum door thickness 40mm. Maximum door width 1100mm. EN3-6 Maximum door weight 180gh. Minimum door thickness 50mm. Maximum door width 1400mm

Plate Protection.

KickPlates All kickplates are made to order, to suit width of door. Also various heights can be made, as plates are sold per metre squared. Radius or square corners can be supplied. Drilled supplied complete with screws.

Various finishes available: Satin Anodised Aluminium (SAA). Polished Anodised Aluminium (PAA). Satin Stainless Steel (SSS). Polished Stainless Steel (PSS) Polished Brass (PB) Polished & Lacquered Brass (PLB) Various sizes and grades available depending on your material. Please telephone Lock-Tech Sales for further information.

All pushplates are made to order, to suit width of door. Also various heights can be made, as plates are sold per metre squared. Radius or square corners can be supplied. Drilled supplied complete with screws.

LO CK -TE

Finger Plates

Escape Hardware.

Panic Bolt

Best Seller Push Pad Single door panic bolt. Use two of these for Non-rebated double doors. Suitable for doors upto 2440 high. EN179 Can be used with ONLY some outside access devices in this section.

Part No:

Best Seller

LO CK -TE

Panic Latch

Push Pad Single door panic latch

Suitable for doors upto 1220mm wide. EN179

Can be used with all outside access in this section. Part No: LKPE297S / Silver

Panic Latch

Push Pad Mortice Actuator inc Cylinder mortice Night Latch. EN179

Panic Bolt

Best Seller Single door panic bolt. Use two of these for Non-rebated double doors.

Suitable for doors upto 2440 X 1220mm wide. EN1125 Can be used with ONLY some outside access devices within this section. Part No: LKPE294S / Silver

Best Seller

LO CK -TE

Panic Latch

Single door panic latch

Suitable for doors upto 1220mm wide. EN1125

Can be used with all outside access devices within this section. Part No: LKPE296S / Silver

Double Door Panic Set

Single panic bolt & Single panic latch. Suitable for doors upto 2440 x 1220mm wide. EN1125 This set-up is used for Rebated double doors. Also require suitable centre strike.

Part No: LKPE294S & LKPE296S & LKPE300S

Knob Outside Access Device

Best Seller Knob Operated Outside Access Device. Suitable for doors upto 60mm thick. Supplied with 2 keys. Additonal keys can be supplied.

LO CK -TE

Lever Outside Access Device

Part No: LKPE298S

Lever operated outside access device. Meets dimension requirements of BS8300 and approved Document "M" (DDA) Suitable for doors upto 55mm thick. Part No: LKPE322EC / including cylinder.

Lever operated mechanical push button access device. Without holdback facility. Suitable for PANIC LATCHES ONLY. Suitable for doors upto 60mm thick. Part No: LKPECL1

Signage.

Auto Fire Door Keep Clear Bi-Lingual Sign Auto Fire door Keep Clear Bi-Lingual. 75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel from stock. Other finishes available to order ONLY.

Fire door Keep Shut Bi-Lingual

LO CK -TE

Fire Door Keep Shut Bi-Lingual Sign

Part No: 7SS19AFDKCB / SSS

75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel from stock. Other finishes available to order ONLY.

Part No: 7SS19FDKSB / SSS

Fire Door Keep Locked Bi-Lingual Sign

Fire door Keep Locked Bi-Lingual 75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel from stock. Other finishes available to order ONLY.

Part No: 7SS19FDKLB / SSS

Male Pictogram Male pictogram. 75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel Polished Stainless Steel Aluminium Polished Brass

Part No: LKSSSMSSS / SSS

Female Pictogram

LO CK -TE

Female pictogram.

75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel Polished Stainless Steel Aluminium Polished Brass Part No: LKSSSFSSS / SSS

Disabled Pictogram

Disabled pictogram.

75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel Polished Stainless Steel Aluminium Polished Brass Part No: LKSSSDSSS / SSS

Unisex Pictogram Unisex pictogram. 75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel Polished Stainless Steel Aluminium Polished Brass

Part No: LKSSSUSSS / SSS

Shower Pictogram

LO CK -TE

Shower pictogram.

75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel Polished Stainless Steel Aluminium Polished Brass Part No: LKSSSSSSS / SSS

Baby Change Pictogram

BabyChange pictogram.

75mm diameter, complete with screws. Available in the following finishes: Satin Stainless Steel Polished Stainless Steel Aluminium Polished Brass Part No: LKSSSBSSS / SSS

Male Pictogram Male Pictogram. High Quality Polyamide, Self Adhesive 150mm high x 72mm wide x 3mm thick Available in all Hewi standard colours. Also available in Stainless Steel

LO CK -TE

Female Pictogram

Part No: HEW801.91.010.33 / Red

Female Pictogram.

High Quality Polyamide, Self Adhesive 150mm high x 87mm wide x 3mm thick Available in all Hewi standard colours. Also available in Stainless Steel Part No: HEW801.91.020.53 / Blue

Less Able Pictogram

Less Able Pictogram.

High Quality Polyamide, Self Adhesive 150mm high x 135mm wide x 3mm thick Available in all Hewi standard colours. Also available in Stainless Steel Part No: HEW801.91.030.90 / Black

Ask for a copy of our signage catalogue. Telephone Sales 01792 720244

Coloured Hardware.

Hewi coloured nylon ironmongery, is regarded as the market leader for coloured products within the architectural ironmongery market. Lock-Tech (Swansea Timber & Plywood) are the South Wales main distributor for this range of ironmongery & their Sanitary range of products. www.barrierfreeliving.co.uk

SOFT TOUCH Lever on Rose .

Hewi Soft Touch. Lever on rose. Made from thermoplastic polyurethane, with corrosion resistant steel insert.

LO CK -TE

Colours: Black or Anthracite Grey Matt

SOFT TOUCH Euro Escutcheon.

Hewi Soft Touch.

Euro profile escutcheon. Made from thermoplastic polyurethane

Colours: Black or Anthracite Grey Matt

SOFT TOUCH Striaght Pull Handle.

Hewi Soft Touch.

Pull handle 425mm centre x 33mm diameter. Made from thermoplastic polyurethane, with corrosion resistant steel insert. Colours: Black or Anthracite Grey Matt

Lever on Rose .

Best Seller

Lever on Rose. Steel cored nylon lever. Various colours available. Various fixings available.

Rose 52mm diameter. (55mm dia rose also available with a seperate fixing). Part No: HEW111E.53 / Blue

LO CK -TE

Euro Escutcheon.

Euro profile Escutcheon. Various colours available.

Rose 52mm diameter.

Part No: HEW306PZ.53 / Blue

Standard Bathroom Turn & Release.

Standard bathroom turn & release with 5mm spindle to suit 5mm followers in bathroom locks. Adaptor available to suit 8mm followers. Various colours available.

Rose 52mm diameter. Part No: HEW306FBM/NR.53 / Blue

Less able Bathroom Turn & Release. Less Able bathroom turn & release with 8mm spindle to suit 8mm followers in bathroom locks. NOT available with 5mm spindle Various colours available.

Striaght Pull Handle.

Rose 52mm diameter.

Best Seller

LO CK -TE

Pull handle 300mm centres x 33mm diameter. Please advise on fixings required & door thickness. Fixings also available to suit Aluminium & uPVC doors. Various lengths & diameters available to order, please ask sales office for further information. Various colours available.

Cranked Pull Handle.

Pull handle 300mm centres x 145mm crank x 33mm diameter. Please advise on fixings required & door thickness. Fixings also available to suit Aluminium & uPVC doors. Various sizes available, as sales office for more information. Various colours available.

Floor Mounted Door Stop. Floor mounted door stop. Made from high quality polyamide.

Best Seller

52mm diameter 42.5mm high Supplied with fixing materials.

LO CK -TE

Part No: HEW615.95 / Grey

Skirting / Wall Mounted Door Stop.

Skirting mounted door stop. Made from high quality polyamide. 40mm diameter Available in 30mm, 60mm, 90mm or 105mm lengths. Supplied with fixing materials. Part No: HEW611.60.53 / 60mm Blue

Floor Mounted Door Stop.

Floor mounted door stop. Made from high quality polyamide. 85mm diameter 22.5mm high Supplied with fixing materials. Also available in Stainless Steel. Part No: HEW625.95

Single Coat Hook on rose. Right angles cylindrical hook with rose fixing, concealed mounting to prevent unauthorised removal. 30mm Deep Rose 40mm diameter Made from high quality polyamide. Various colours available.

LO CK -TE

Coat Hook on Rose with Buffered Door Stop.

Part No: HEW801.90.010.99

Right angles cylindrical hook with rose fixing and black elastollan buffer, concealed mounting to prevent unauthorised removal. 105mm Deep Rose 70mm diameter

Made from high quality polyamide. Various colours available. Part No: HEW.477.90.035.99

Under Shelf coat Hook

Cylindrical half round hook with rose fixing, concealed mounting to prevent unauthorised removal. 50mm Deep Rose 50mm diameter Made from high quality polyamide. Various colours available. Part No: HEW477.90.015

Robe Hook. Single coat hook, for hanging up clothing and bathroom accessories, easy to clean. 75mm High. 48mm deep. 22mm wide 28mm centre to centre fixing points.

Made from high quality polyamide. Various colours available. Screws NOT supplied. Part No: HEWQ477.90.060 / Colour TBC

LO CK -TE

Hat & Coat Hook

Hat & Coat hook, for hanging up clothing and bathroom accessories, easy to clean. 165mm High. 110mm deep. 22mm wide 28mm centre to centre fixing points.

Best Seller

Made from high quality polyamide. Various colours available. Screws NOT supplied. Part No: HEWQ477.90.070 / Colour TBC

Hat & Coat Hook with Ball top..

Single coat hook, for hanging up clothing and bathroom accessories, easy to clean. 174mm High. 117mm deep. 22mm wide 28mm centre to centre fixing points. Made from high quality polyamide. Various colours available. Screws NOT supplied. Part No: HEWQ477.90.080 / Colour TBC

Cloakroom. Specials.

Twin Slot Shelving.

Twin slot upright White Anit-Bacterial powder coated uprights.

White Anit-Bacterial powder coated brackets.

LO CK -TE

Twin slot brackets

Sizes Available from stock: 425mm (16.75in) Part No: LKN11117 710mm (28in) Part No: LKN11128 1000mm (40in) Part No: LKN11140 1220mm (48in) Part No: LKN11148 1600mm (63in) Part No: LKN11163 1980mm (78in) Part No: LKN11178 2400mm (94in) Part No: LKN11194

Sizes available from stock: 120mm x 50mm (4.5x2in) Part No: LKN11205 170mm x 50mm (6.5x2in) Part No: LKN11207 220mm x 50mm (8.5x2in) Part No: LKN11209 270mm x 50mm (10.5x2in) Part No: LKN11211 320mm x 50mm (12.5x2in) Part No: LKN11213 370mm x 50mm (14.5x2in) Part No: LKN11215 370mm x 75mm (14.5x3in) Part No: LKN11315 470mm x 75mm (18.5x3in) Part No: LKN11319 610mm x 75mm (24x3in) Part No: LKN11324 370mm x 100mm (14.5x4in) Part No: LKN11415 470mm x 100mm (18.5x4in) Part No: LKN11419 610mm x 100mm (24x4in) Part No: LKN11424

Twin Book Ends

White Anit-Bacterial powder coated book ends. Sizes available from stock: 150mm (6in) Part No: LKN11506 200mm (7.75in) Part No: LKN11508 250mm (9.75in) Part No: LKN11510 Sold in pairs.

White Strongbeam Brackets Cantilever brackets offer great performance and value. They are ideal for use in garages, sheds and areas of general storage.

White melamine shelving

Sizes available from stock: 100 x 75mm (4x3in) 150 x 120mm (6x5in) 200 x 150mm (8x6in) 250 x 200mm (10x8in)

LO CK -TE

Edged two long edges only. Sizes available from stock: 2440 x 150 x 15mm 2440 x 230 x 15mm 2440 x 305 x 15mm 2440 x 380 x 15mm 2440 x 455 x 15mm 2440 x 535 x 15mm 2440 x 610 x 15mm 2440 x 685 x 15mm 2440 x 760 x 15mm 2440 x 915 x 15mm

Edging Plas

Edging plas for edging melamine shelves. White. Available in from stock: 2.400 metre rools 50 metre rools

Anti-Ligature Hardware.

Hospital Tip Standard Duty Ball Bearing Hinge Security Standard duty ball bearing hinge. 100 x 75mm hinge suitable for door leaves upto adjusted door weight of 120kg maximum. Suitable for use on Fire doors. Certifire approved - CF339

Bedroom Lock Set PR1-46-729A

Finishes available. SSS. PSS.

LO CK -TE

This lock set is specifically designed for use in mental health and psychiatric establishments. The lock case incorporates a deadlock with a push/pull roller catch. The deadbolt is thrown or withdrawn either by the anti-ligature thumb turn / pull on the inside and by the key in the single cylinder on the outside. Staff access is guaranteed at all times by use of the control key. This control (Primary Barricade Protection) is a unique integral feature of the specially designed lock case.

Indicator Lock Set PR1-56-729A

This lock set is specifically designed for use within mental health and psychiatric establishments. The lock case incorporates a bathroom deadlock with a push/pull roller catch. The deadbolt is thrown or withdrawn by the anti-ligature thumb turn / pull on the inside which at the same time changes the room status indicator on the outside. The deadbolt is thrown and withdrawn from the outside by use of the key in the single cylinder. Staff access is guaranteed at all times by use of the control key. This control (Primary Barricade Protection) is a unique integral feature of the specially designed lock case.

Automatic Lock Set (key/turn) PR1-66-729A

This door set has been specifically designed for use in mental health to help address the problem of client self harm, yet at the same time provide a high level of client privacy. The deadlocking night latch will automatically deadlock when the door is closed. A 20 degree turn of the internal anti-ligature thumb turn releases the latch allowing the door to be pulled open by way of the integral anti-ligature pull. Externally the door is unlocked by use of the key.

LO CK -TE

En-Suite Lock Set (key/turn) PR1-76-729A

Staff access is guaranteed at all times by use of the control key. This control (Primary Barricade Protection) is a unique integral feature of the specially designed lock case.

This lock set helps provide an anti-ligature solution to narrow cupboards, duct access doors etc combining a roller bolt deadlock with an anti-ligature pull handle. In day to day use, the door can be held closed by the adjustable roller bolt. If however it is necessary to "lock off" the room, this is done by use of the staff control key in the external cylinder.

Service Riser Lock Set PR1-76X-729A

This lock set helps provide an anti-ligature solution by combining a roller bolt deadlock with an anti-ligature pull handle. In day to day use, the door can be held closed by the adjustable roller bolt. If however it is necessary to "lock off" the room, this is done by use of the staff control key in the external cylinder.

Automatic Lock Set (key/key) PR1-86-729A This lock set helps provide an anti-ligature solution where an auto locking lock case is required. The lock set combines an auto deadlocking night latch with an anti-ligature pull handle one side only.

LO CK -TE

En-Suite Lock Set (key/key) PR1-96-729A

In day to day use, the door is automatically locked when closed and can be opened by the staff control key from one side only. A holdback facility can be provided if required.

This lock set is designed for use on a single or double action doors where key access is required from both sides. The lock set combines a roller bolt deadlock with pull handles both sides. The door can be held closed (not locked) on the roller bolt if required.

Bedroom Lock Set PR3-46-729A / Secondary barricade.

Indicator Lock Set PR3-56-729A / Secondary barricade. This lock set is specifically designed for use within mental health and psychiatric establishments. The lock case incorporates a bathroom deadlock with a push/pull roller catch. The deadbolt is thrown or withdrawn by the anti-ligature thumb turn / pull on the inside which at the same time changes the room status indicator on the outside. The deadbolt is thrown and withdrawn from the outside by use of the key in the single cylinder.

Staff access is guaranteed at all times by use of the control key. This control (Primary Barricade Protection) is a unique integral feature of the specially designed lock case.

LO CK -TE

Automatic Lock Set PR3-66-729A / Secondary barricade.

En-Suite Lock Set (Key/Turn) PR3-76-729A / Secondary barricade.

This lock set helps provide an anti-ligature solution to narrow cupboards, duct access doors etc combining a roller bolt deadlock with an anti-ligature pull handle In day to day use, the door can be held closed by the adjustable roller bolt. If however it is necessary to "lock off" the room, this is done by use of the staff control key in the external cylinder. In addition to Primary Barricade Override by way of the staff control key, this lock set provides single screw access Secondary Barricade Override Protection for situations where the keyway may be blocked or the cylinder damaged. This provides 100% access at all times

Service Riser Lock Set PR3-76X-729A / Secondary barricade.

This lock set helps provide an anti-ligature solution by combining a roller bolt deadlock with an anti-ligature pull handle.

In day to day use, the door can be held closed by the adjustable roller bolt. If however it is necessary to "lock off" the room, this is done by use of the staff control key in the external cylinder.

LO CK -TE

Automatic Lock Set (Key/Key) PR3-86-729A / Secondary barricade.

This lock set helps provide an anti-ligature solution where an auto locking lock case is required. The lock set combines an auto deadlocking night latch with an anti-ligature pull handle one side only. In day to day use, the door is automatically locked when closed and can be opened by the staff control key from one side only. A holdback facility can be provided if required.

En-suite Lock Set (Key/Key) PR3-96-729A / Secondary barricade.

Anti-Ligature Pinch Grip handle PR4-729A

Best Seller

Our instantly identifiable Pinch Grip handle is recognised as a design icon. It offers no ligature point in any direction and remains stylish and elegant. The perfect solution in most applications this tried and tested design has been the mainstay of the Primera range since its inception. Rather than being an adaptation of an existing product it was, like all the current Primera products, designed from scratch specifically to fulfil a requirement. A tough and practical item it conforms fully to DHF TS001 at Grade 4.

It is supplied mounted on 205 x 90 x 3mm back plate, radiused at the top and bottom, with chamfered edges.

Anti-Ligature Elephants Trunk on a recessed plate handle PR4-730E

LO CK -TE

When reduced dexterity issues need to be considered due to the physical impairment of clients our new Elephants Trunk handle should prove to be the perfect solution. Avoiding the protrusion issues of comparative products, its sleek lines follow Primeraâ&#x20AC;&#x2122;s ethos that door furniture should be both efficient and attractive. Designed specifically to be supplied on a recessed dish it offers an elegant solution to situations when manual dexterity may be an issue. By nature of its design the Elephants Trunk handle does not conform to TS001, it is also not suitable for area where the services users have challenging behaviour unless fitted using back to back fixings.

Anti-Ligature Grap handle on a recessed plate PR4-731F

In situations where issues of user grip limitations and upwards ligature point exclusion have equal significance our new Recessed Grab handle is the solution. Created to complement the style of other Primera products it could also be considered as an alternative to the Pinch Grip handle in more general usage applications. A robust and functional item it conforms fully to DHF TS001 at Grade 4. Designed principally to be supplied on a recessed dish it offers an increased amount of purchase to pull the door without compromising the excellent ligature resistant qualities of the product.

Anti-Ligature Recessed handle PR4-726

LO CK -TE

Anti-Ligature Pinch Grip handle on Square plate PR4-729B

For applications where a flush handle is both aesthetically preferred and practically appropriate the 726 is a tried and trusted solution. With facial dimensions of 85 x 105mm and a depth of 22mm it has been designed to maximise the amount of purchase available to pull the door without compromising the excellent ligature resistant qualities of the product. It has been designed to meet the stringent technical specifications detailed in DHF TS001 and is particularly suitable for environments prone to challenging behaviour.

Anti-Ligature Elephants Trunk Pull Handle on Flat radius Plate PR4-730A

When reduced dexterity issues need to be considered due to the physical impairment of clients our new Elephants Trunk handle should prove to be the perfect solution. Avoiding the protrusion issues of comparative products, its sleek lines follow Primeraâ&#x20AC;&#x2122;s ethos that door furniture should be both efficient and attractive. The '730A' is supplied on a chamfered radiused flat plate for occasions when the recess dish may not be appropriate. By nature of its design the Elephants Trunk handle does not conform to TS001, it is also not suitable for area where the services users have challenging behaviour unless fitted using back to back fixings.

Anti-ligature version of the H131-106 tested and approved to TS001 "Door mounted Anti-ligature devices for Safety & Security purposes" Grade 4 (0.5mm)

Anti-Ligature Grab Handle on Flat radius Plate PR4-731A In situations where issues of user grip limitations and upwards ligature point exclusion have equal significance our new Grab handle is the solution. Created to complement the style of Primera’s flagship '729 Pinch Grip' it could also be considered as an alternative to the Pinch Grip handle in more general usage applications. A robust and functional item it conforms fully to the stringent technical specifications detailed in DHF TS001 at Grade 4 and is ligature resistant from all angles – up down, left, right and perpendicular to the surface of the door

Designed specifically to be supplied on a recessed dish it is also available on a radiused flat plate for occasions when the dish may not be appropriate. It can alternatively be fixed to a bespoke plate as a special item.

LO CK -TE

Anti-Ligature Emergency Door Stop.

Anti-ligature Emergency Door Stop Tested and approved to TS001 Door mounted Anti-ligature devices for Safety & Security purposes. Grade 304 Stainless Steel.

Hygienic Door Handle. NOT ANTI -LIGATURE

● Approved - used by many NHS trusts. ● Innovative - operating handle activates motor & advances cover. ● Hygienic - handle cover is refreshed for a clean exit every time.

● High volume - up to 2,600 uses per refill. ● Energy efficient - batteries last approx. 30,000 uses. ● Robust - solid steel handle, polycarbonate housing.

Finger Protection.

SafeHinge Safehinge.

Heavy Duty.

LO CK -TE

Aluminium plate finger guard

Mechanical Severe Duty rating. Tested to 1.15 million cycles.

Designed to take impact. Anodised aluminium is fitfor-purpose in severe duty environments such as schools and hospitals. Maintain highest hygiene standards and combat Healthcare Associated Infections (HCAI) with easy wipe clean surface. Standard height 1800mm. Can be supplied coloured or with logo.

Constatier finger guard

Medium Duty

Tested over 200,000 opening and closing cycles without any sign of degradation. Available colours: Black, Cream, Brown, Grey. Standard height 2100mm (Other lengths to special order only). Screw fixed.

Roller blind finger guard Heavy Duty. Tested over 200,000 opening and closing cycles without any sign of degradation. Standard height 1925mm.

Various colours are available.

Finger guardian

LO CK -TE

Medium Duty.

Finger Guardian is a flexible safety strip which prevents fingers being jammed on the hinge side of a door and the jamb on the hinged side. When fitted the gap is covered completely and it is suitable for domestic or commercial use. Standard Height 1950mm

Finger Saver

Best Seller

Medium Duty

Prevents fingers being trapped in gap between frame and rear edge of door Extremely durable and maintenance free Impact resistant, Available in 10 Colours Fits most door types Wipe clean finish Standard Height 1980mm

Door Seals & Thresholds

Panic Door Threshold.

LO CK -TE

For Flush Doors. Designed for use with flush doors of any material. For use with a rebated door see Panic Door Threshold for rebated doors. Meets all Part 'M' requirements. Accommodates all manufacturers' bespoke locking keeps. Supplied with a black PVC cover to protect threshold finish from lock mechanism damage.

Industrial Double Ramp Heavy duty aluminium "industrial" product ideal for use on garages and warehouses. Will take 2000kg loading. Suitable for cable to run underneath. Robust and durable. Mill finish Aluminium Part No:

Compression Draught Excluder. Simple yet versatile threshold providing easy access for light wheeled traffic. Heavy duty aluminium construction with tough nitrile rubber seal. Mill finish Aluminium. Gold finish Aluminium.

Easy Access Threshold Exceeds BS 6375 Part 1. Concealed fixings. Top section supplied with edge covers. Part No: STO04/332

Mill finish Aluminium. Gold finish Aluminium.

LO CK -TE

Acoustic Seal

Acoustic (Batwing) Perimeter Seal. Batwing acoustic & smoke seal Effective smoke seal up to 200째C. Aggressive self-adhesive backing tested on many surfaces, including MDF. Part No: LORBWIS10102.1W / white

Intumescent Strips.

Intumescent strips. 2100 10 x 4mm plain or smoke s/adhesive white or brown. 2100 15 x 4mm plain or smoke s/adhesive white or brown 2100 20 x 4mm plain or smoke s/adhesive white or brown. All above items are carried in stock. Others colours are available to order.

Specials.

If there is any ironmongery or door hardware that you require, but isn't in this catalogue please send enquiries to sales@lock-tech.co.uk

LOCK TECH 57-60 OXFORD STREET SWANSEA SA1 3JD Tel: 01792 720244 Fax: 01792 462243 sales@lock-tech.co.uk www.lock-tech.co.uk www.swanseatimber.co.uk www.barrierfreeliving.co.uk