J. J. KELLER CHECKS ALL THE BOXES AS A PPE SUPPLIER OF CHOICE
When choosing a Personal Protective Equipment (PPE) supplier, you need to make sure they meet your needs. J. J. Keller has been a safety compliance leader for 70 years, and along with our SAFEGEAR® product line, checks all the boxes as a PPE partner you can trust:
COMPLIANT PRODUCTS - Our team of in-house regulatory specialists monitors regulations and ensures our products meet all requirements.
WIDE SELECTION - Our product specialists research products to ensure we offer the solutions our customers need, including those for unique customer challenges, such as women’s sizing, climbing helmets, cooling gear, rain gear, and more.
HIGH QUALITY, LOW PRICES - We developed our SAFEGEAR® line of PPE for YOU, with a mission to provide high-quality products at lower price points.
INVENTORY MANAGEMENT - We offer inventory management programs to consistently provide the right products to all your locations as needed.
Check out our video to learn more.
Arm Your Workers With Gear For Any Weather
Heat illness can occur in both indoor and outdoor work settings when the heat index (HI) is as low as 80°F or less. Keep your workers safe and visible as the summer heats up, and into the fall as temps drop, with J. J. Keller ® SAFEGEAR® Seasonal Gear. Choose from a variety of solutions, including:
• NEW cooling products
• Rain gear
• T-shirts (short & long)
• Winter jackets
• Sweatshirts
• Winter hats
See pages 62-70.
TABLE OF CONTENTS
HI-VIS APPAREL
Ensure workers are seen in a variety of locations and light levels.
5–12 SAFETY VESTS
13–15 SWEATSHIRTS
16–20 T-SHIRTS
21–25 JACKETS & PANTS
PRO TIP:
Certified vests are categorized by type and performance class. The three certified types of vests are Type O (off roadway work), R (roadway work) and P (public safety workers). Performance classes are based on the amount of visible retroreflective materials and design attributes:
• Class 1 certified vests have the least amount of visible material but allow workers to be identified
• Class 2 offers increased visibility, providing more definition of the worker’s form
• Class 3 has the most visibility, allowing workers to be recognized in complex work environments. Get more PPE insight at JJKellerSAFEGEAR.com
HI-VIS APPAREL
HI-VIS APPAREL
CERTIFIED SAFETY VESTS
S/MCT-59830
L/XLCT-59831
2XL/3XLCT-59832
4XL/5XLCT-59833
S/MCT-58029
L/XLCT-58030
2XL/3XLCT-58031
4XL/5XLCT-58032
ORANGE
S/MCT-58033
L/XLCT-58034
2XL/3XLCT-58035
4XL/5XLCT-58036
S/MCT-59838
L/XLCT-59839
2XL/3XLCT-59840
4XL/5XLCT-59841 ORANGE
S/MCT-59842
L/XLCT-59843
2XL/3XLCT-59844
4XL/5XLCT-59845
X-BACK BREAKAWAY
S/MCT-58037
L/XLCT-58038
2XL/3XLCT-58039
4XL/5XLCT-58040
ORANGE
S/MCT-58041
L/XLCT-58042
2XL/3XLCT-58043
4XL/5XLCT-58044
S/MCT-59846
L/XLCT-59847
2XL/3XLCT-59848
4XL/5XLCT-59849
ORANGE
S/MCT-59850
L/XLCT-59851
2XL/3XLCT-59852
4XL/5XLCT-59853 X-BACK ZIPPER
ALSO AVAILABLE
Check out our NEW PPE in Women’s Sizing See pages 26-33. Check out our NEW Cooling Products See pages 64-68.
SAFEGEAR® Class 2 vests are best for working environments that pose a great risk to workers, including those who work on a roadway and may need to turn their attention away from vehicles moving near them. Type R vests are appropriate for workers who are exposed to roadway traffic and those who work in an environment with moving equipment/vehicles.
HI-VIS APPAREL
STANDARD AND X-BACK SAFETY VEST
• Type R Class 2
• Meets ANSI/ISEA 107-2015 Standard
• X-Back style also meets Canadian Standards Association (CSA) Z96-15
• Breakaway style features 5-point hook & loop breakaway and additional pockets
• Machine washable
silver glass bead reflective stripes
External chest flapped phone pocket with pen pocket
2 external lower pockets (lower right pocket with flap fits up to an 8" tablet)
Breathable mesh polyester shell
Zipper closure (hook & loop and breakaway also available)
BREAKAWAY VESTS
Sizing for Standard and X-Back Safety Vests
&
Factory employees are typically prohibited from wearing loose-fitting clothing or jewelry because it could get caught in moving machine parts and pull the worker into the danger zone. You might have a similar hazard if your workers must wear high-visibility vests around moving equipment on your jobsite. You can’t work safely without the vests, and there are benefits to the vests’ loose-fitting design. The best solution is to use vests that will easily and safely break away from the worker if the vest becomes caught on equipment.
SIZE
Small/Medium46"-50"45"-47.5"
Large/X-Large52"-56"49.5"-52"
2X-Large/3X-Large60"-64"54.5"-56.5"
4X-Large/5X-Large68"-72"59"-61.5"
ALSO AVAILABLE
Type R Class 2 T-Shirt with X Back Visit JJKeller.com/SAFEGEAR
HI-VIS APPAREL
TYPE R CLASS 2 5-POINT BREAKAWAY SURVEYOR VEST
J. J. Keller Advantage members get FREE SHIPPING! Take advantage at JJKeller.com/SAVE
• ANSI/ISEA 107-2015 Type R Class 2 compliant
• Two-tone lime/orange provides optimal visibility; 2" silver reflective tape on 4" orange goes over the shoulders and around the torso
• 5-point breakaway with hook & loop closure on sides, shoulders and front
• 2 mic tabs; 4 outer pockets, 2 internal pockets
• Machine washable
TYPE R CLASS 2 SAFETY VEST
S/MCT-67245
L/XLCT-67246
2XL/3XLCT-67247
4XL/5XLCT-67248
TYPE R CLASS 2 SURVEYOR VEST
• 2" silver reflective tape on 4" orange goes over the shoulders and around the torso
• ANSI/ISEA 107-2015 Type R Class 2; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• Made of durable, breathable polyester
• Zipper closure; 4 external pockets, 2 upper mic tabs, and 2 internal pockets
• Machine washable
S/MCT-59433S/MCT-59437
L/XLCT-59434L/XLCT-59438
2XL/3XLCT-594352XL/3XLCT-59439
See page 6 for vest size chart.
Call 833-806-6999 for imprint locations and pricing.
“In preparation for emergency, good fit, excellent reflective ability.”
SAFETY | WELCH, WV
HI-VIS APPAREL
TYPE R CLASS 2 REVERSIBLE VEST WITHOUT POCKETS
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• Reflective tape on back goes over the shoulders and around the torso
• Reverse vest to plain hi-vis color when working near machines that don’t function when reflective materials are present
TYPE R CLASS 2 VEST WITHOUT POCKETS
• ANSI/ANSEA 107-2020 Type R Class 2 compliant
• Reflective tape on back goes over the shoulders and around the torso
• Lightweight, 100% polyester; zipper closure
• No pockets on vest, eliminates snag points
• Machine washable
• Lightweight polyester; zipper closure
• No pockets on vest, eliminates snag points
• Machine washable
HI-VIS APPAREL
ENSURE THE RIGHT FIT
See page 6 for vest size chart.
TYPE R CLASS 2 BLACK BOTTOM VEST
• ANSI/ISEA 107-2015 Type R Class 2 compliant
• 2" ANSI-compliant silver reflective tape on orange ribbon goes over the shoulders and around the torso
• 2 mic tabs; 2 large outer pockets, clear ID pocket, and pencil pocket
• Hole for attaching a fall harness on back
• Machine washable
TYPE
R CLASS 2 SAFETY VEST
• ANSI/ISEA 107-2020 Type R Class 2 compliant
NEW TYPE R CLASS 2 HEAVY-DUTY VEST
• 2" reflective tape on 3" orange tape goes over the shoulders and around the torso
• Lightweight, machine washable polyester mesh
• 2 mic tabs
• 2 lower pockets with flap and grommet holes for flagging tape; right chest pencil pocket; left chest pocket with reflective striping; 2 internal pockets
• Zipper closure with webbing reinforcement
HEAVY-DUTY VEST
S/MCT-62509
L/XLCT-62510
2XL/3XLCT-62511
4XL/5XLCT-62512
ENSURE THE RIGHT FIT
See page 6 for vest size chart.
Type R Class 2 Reversible Fleece-Lined Winter Vest See page 11. Type R Class 2 Two-Tone Vest Visit JJKeller.com/SAFEGEAR
HI-VIS APPAREL
TYPE R CLASS 3 SAFETY VEST
• ANSI/ISEA 107-2015 Type R Class 3 compliant; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• 2" ANSI-compliant silver reflective tape goes over the shoulders and around the torso and arms
• Machine washable
• 3 external pockets: lower left with no flap, lower right with flap, and chest with pen pocket; zipper closure
S/MCT-63378S/MCT-63382
L/XLCT-63379L/XLCT-63383
2XL/3XLCT-633802XL/3XLCT-63384
4XL/5XLCT-633814XL/5XLCT-63385
TYPE R CLASS 2 VEST WITH GLOW-IN-THE-DARK SAFETY TAPE
• Machine washable
S/MCT-67249
L/XLCT-67250
2XL/3XLCT-67251
4XL/5XLCT-67252
X-BACK TYPE R CLASS 3
VEST
S/MCT-67374
L/XLCT-67375
2XL/3XLCT-67376
• ANSI/ISEA 107-2020 Type R Class 2 compliant
4XL/5XLCT-67377
• 2" silver glass bead over glow-in-the-dark high-visibility tape goes over the shoulders and around the torso
• Lightweight, breathable polyester mesh with zipper closure
• Offers a high intensity glow for 30 minutes before fully discharging after 4 hours; charge with sunlight or artificial light for 10-30 minutes
HI-VIS APPAREL
REVERSIBLE FLEECE-LINED WINTER VEST
• ANSI/ISEA 107-2015 Type R Class 2 compliant
• 2" silver glass bead tape over 2¾" orange ribbon goes over the shoulders and around the torso
• Fleece lined, with hand pockets
• Padded collar for comfort and warmth; padded neck to support extra weight in pockets
• 2 mic tabs; hook & loop pockets: 2 on chest, 2 on torso (with vent holes); 2 elastic pockets with hook & loop holders; 1 large zippered pocket on back
• Machine washable
WINTER VEST
NON-CERTIFIED SAFETY VESTS
COLORED SAFETY VESTS
• Use where visibility is important, but not mandated by ANSI Standards
• Red vest is ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" silver reflective tape over contrasting color goes over the shoulders and around the torso
• Durable polyester shell with zipper closure and internal drawstrings for adjustable waist
• Use different color vests to identify visitors, distinguish job responsibilities/areas, and more
• 2 mic tabs; 3 external pockets and 2 large inner pockets
• Machine washable
HI-VIS APPAREL
NON-CERTIFIED SAFETY VESTS
• Use where visibility is important, but not mandated by OSHA or ANSI standards
• 1" tape (silver beaded or PVC reflective), vertical over the shoulders
• Lightweight, breathable polyester mesh (machine washable)
• Elastic sides for snug fit
• Hook & loop front closure
• Clear chest pocket accommodates ID badge
• One size fits most
Why Non-Certified?
Non-certified safety vests are intended for use where visibility is important but not mandated by OSHA or ANSI standards. Great for applications such as warehouse/ distribution, delivery, parking lot attendants, and related jobs.
• Use where visibility is important, but not mandated by
• Lightweight, breathable polyester mesh (machine washable)
• Elastic sides for snug fit
• Hook & loop front closure
• One size fits most
HI-VIS APPAREL
SWEATSHIRTS
Drawstring hood
Type R Class 3 (ANSI/ISEA 107-2015 compliant) sweatshirt includes 2"-wide silver glass bead reflective vertical stripes over the shoulder and around the torso and arms. X-Back style also meets Canadian Standards Association (CSA) Z96.22.
Polyester single fleece material
Front pouch (pullover) or 2 front pockets (zipper closure)
Black panels on wrists and bottom hide dirt and wear
Elastic cuffs and waistband
HI-VIS APPAREL
ENSURE THE RIGHT FIT
See page 15 for sweatshirt size chart.
TYPE O CLASS 1 BLACK ZIPPER SWEATSHIRT
• ANSI/ISEA 107-2020 Type O Class 1 and CSA Z96.22 Class 1 Level 2 compliant
• 2" vertical serrated reflective silver tape over lime ribbon goes over the shoulders and around the torso and arms
• 80% cotton, 20% polyester
• YKK zipper; 2 front pockets; drawstring hood; elastic waistband and cuffs
• Machine washable
O CLASS 1
ZIPPER SWEATSHIRT
SCT-67221
MCT-67222
LCT-67223
XLCT-67224
2XLCT-67225
3XLCT-67226
4XLCT-67227
5XLCT-67228
NEW TYPE R CLASS 3 QUARTER-ZIP SWEATSHIRT
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• Two-tone serrated reflective tape stripes on the back, over the shoulders, and around the torso
• 100% polyester single fleece
• Front hand pocket; elastic waistband and cuffs
QUARTER-ZIP SWEATSHIRT
SCT-65179
MCT-65180
LCT-65181
XLCT-65182
2XLCT-65183
3XLCT-65184
4XLCT-65185
5XLCT-65186
HI-VIS APPAREL
TYPE R CLASS 3 CREW NECK SWEATSHIRT
• ANSI/ISEA 107-2020 Type R Class 3 compliant; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• 100% polyester 300 gsm PK anti-pill fleece
SCT-65162SCT-65170
MCT-65163MCT-65171
LCT-65164LCT-65172
XLCT-65165XLCT-65173
2XLCT-651662XLCT-65174
3XLCT-651673XLCT-65175
4XLCT-651684XLCT-65176
5XLCT-651695XLCT-65177
• Reflective tape goes over the shoulders and around the torso and arms
• Front hand pocket; elastic waistband; black elastic cuffs
SCT-67358 MCT-67359
LCT-67360
XLCT-67361
2XLCT-67362
3XLCT-67363
4XLCT-67364
5XLCT-67365
HI-VIS APPAREL
T-SHIRTS & POLOS
TYPE R CLASS 2 T-SHIRT
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" reflective tape goes over the shoulders and around the torso
• Moisture-wicking, breathable polyester birdseye knit
• Front pocket
• Machine washable
TYPE R CLASS 2 T-SHIRT
Sizing for Polo Shirt
NEW TYPE R CLASS 2 POLO SHIRT
• ANSI/ISEA 107-2010 Type R Class 2 compliant
• 2" reflective tape goes over the shoulders and around the torso and arms
• Moisture wicking; breathable, antimicrobial polyester birdseye mesh
• SPF 50 helps protect against the sun
• Front pocket on left chest
HI-VIS APPAREL
TYPE O CLASS 1 BLACK T-SHIRT
• ANSI/ISEA 107-2020 Type O Class 1 compliant
• 2" silver glass bead tape over lime goes over the shoulders and around the torso
• Breathable 100% polyester birdseye mesh
• 1external pocket
• Machine washable
Common applications: transport, construction workers, survey crews, and utility crews.
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE
Sizing for T-Shirt
TYPE R CLASS 2 T-SHIRT WITH BLACK BOTTOM
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" silver serrated tape goes over the shoulders and around the torso
• Breathable 100% polyester birdseye mesh
• 1external pocket
• Machine washable TYPE R CLASS 2
SCT-67229SCT-67237
MCT-67230MCT-67238
LCT-67231LCT-67239
XLCT-67232XLCT-67240
2XLCT-672332XLCT-67241
3XLCT-672343XLCT-67242
4XLCT-672354XLCT-67243
5XLCT-672365XLCT-67244
MAKE AN IMPRESSION
WITH IMPRINTED HI-VIS APPAREL L
WHY IMPRINTED?
Imprinted apparel allows you to:
• Promote your company and brand
• Demonstrate your company’s commitment to safet y
• Communicate critical safety messages to your employees and the public
You can add branding and messaging to your SAFEGEAR® PPE with our inexpensive and quality imprinting.
WHY J. J. KELLER?
Our unique dye sublimation process delivers images that will not crack or scrape off like traditional heat transfer or screen-printed materials. Plus, we offer imprinting on up to 6 different areas on the front and back.
“These jackets have provided a great level of added visibility when worn at roadside calls, plus they offer additional protection from the wind and cold. The jackets’ imprinting has held up very well, without any cracking or peeling.”
DANIEL WIECHMAN | COMMUNITY LIAISON OFFICER | FOX CROSSING POLICE, WI
Look for this s ymbol to see which items are available for imprinting. To see exact imprint location options for each item, visit JJKeller.com/SAFEGEAR
TYPE R CLASS 3 LONG-SLEEVE T-SHIRT
• ANSI/ISEA 107-2020 Type R Class 3 compliant; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• 2" segmented silver reflective tape goes over the shoulders and around the torso and arms
• Black accents on front torso and arm cuffs
• 1 outside pocket
• Constructed of moisture-wicking polyester mesh (machine washable)
Common applications: road construction, survey crews, transport, utility crews, and other outdoor activities where employees need to be visible and warm.
When your employees work in low-visibility environments, make sure you provide them with the right high-visibility apparel. For example, Class 2 X-back apparel is a great option for flaggers in traffic zones or employees who work on or near a construction site. When you ensure that employees wear the right equipment, you protect their well-being so they can make it home safe.
HI-VIS APPAREL
JACKETS AND PANTS
NEW TYPE R CLASS 2 SOFTSHELL JACKET
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" chevron reflective printed tape goes over the shoulders and around the torso
• 98% polyester, 2% spandex heavyweight with fleece backing; fleece-lined collar
• YKK zipper and storm tab keep wind out
• 2 YKK zippered hand pockets and 1 YKK zippered chest pocket; internal chest pocket plus large inside pocket; hook & loop cuffs
• Black bottom and cuffs hide dirt
LCT-72189
XLCT-72190
2XLCT-72191
3XLCT-72192
4XLCT-72193
5XLCT-72194
NEW DOUBLE KNIT FLEECE JACKET
• Reflective piping across the front and back yoke, sleeves, and side seam detail
• 280 gsm heathered mélange double knit fleece and 100% ripstop nylon
• Hi-vis lime overlock stitching at armholes and contrast detail
stitching at bottom of jacket
• 2 YKK zippered hand pockets and one external YKK zippered chest pocket, all with decorative zipper pulls; large inside pocket
• 2 inside bungee cords at bottom tighten for a perfect fit
• Elastic binding at wrists and hood; zippered closure
XLCT-72259
2XLCT-72260
3XLCT-72261
4XLCT-72262
5XLCT-72263
HI-VIS APPAREL
RIP-STOP 3-IN-1 BOMBER JACKET WITH REMOVABLE FLEECE LINER
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• 2" silver glass bead tape on jacket and liner goes over the shoulders and around the chest, torso and arms
• Durable 300D ripstop oxford outer shell with 280 gsm hi-vis lime Class 3 removable fleece liner; removable hood; YKK zipper
• Black bottom and hook & loop cuffs hide dirt
• 2 mic tabs; dual slot pencil pocket on left sleeve; cell phone and ID pocket on chest; large zipper pocket (fits tablet)
BOMBER JACKET
2XLCT-64361
3XLCT-64362
4XLCT-64363
5XLCT-64364
SOFTSHELL JACKET
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• 2" ANSI-compliant silver reflective tape
• Made with ANSI polyester softshell fabric with 190T tafetta lining
• Black bottom and sleeve cuffs hide dirt
• 2 mic tabs
• YKK zipper
• Includes drawstring waist and front zipper pocket
HI-VIS APPAREL
CLASS E PULL-ON PANTS
• ANSI/ISEA 107-2020 Supplemental Class E compliant (combine pants with an ANSI Class 2 or 3 top to create ANSI Class 3 outfit)
• 2" reflective tape over orange goes around bottom of legs
• Lightweight, breathable polyester mesh; black bottoms hide dirt
• Elastic waistband with drawstring
• 2 side hand pockets; 1 cargo pocket on right leg
• Machine washable
SCT-67322
MCT-67323
LCT-67324
XLCT-67325
2XLCT-67326
3XLCT-67327
4XLCT-67328
5XLCT-67329
NEW CLASS E SNOWPANTS
• ANSI/ISEA 107-2020
Supplemental Class E compliant (combine pants with an ANSI Class 2 or 3 top to create ANSI Class 3 outfit)
• 100% polyester rip-stop oxford fabric with 190T taffeta lining with 160 gram polyfill inside
• 2 side hand plus 2 back YKK zippered pockets
• Elastic waistband with drawstring; black bottoms hide dirt
• Machine washable
3XLCT-72201
4XLCT-72202
5XLCT-72203
HI-VIS APPAREL
TYPE R CLASS 3 BOMBER JACKET
• ANSI/ISEA 107-2015 Type R Class 3 compliant
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" reflective tape over the shoulders and around the torso (black side doesn’t have reflective tape)
• Durable quilted polyester
• Reversible (hi-vis lime/black)
• 2 outer pockets with flap; YKK zipper closure
5XLCT-67270
• 2" ANSI-compliant silver glass bead tape over the shoulders and around the torso and arms
• Made of high-quality 300D polyester oxford outer shell with 160g thermal quilted insulation
• Black bottom front and cuffs hide dirt; elastic waistband and cuffs help minimize cold
• 2 front pockets and 1 hook & loop flap cell phone chest pocket; two mic tabs
Common applications: transport, ro ad construction, survey crews, utility crews, and other outdoor activities where visibility and warmth are needed
SCT-59338SCT-67330 MCT-59339MCT-67331
LCT-59340LCT-67332
XLCT-59341XLCT-67333
2XLCT-593422XLCT-67334
3XLCT-593433XLCT-67335
4XLCT-593444XLCT-67336
5XLCT-593455XLCT-67337
HI-VIS APPAREL
FLEECE-LINED PARKA JACKET
TYPE R CLASS 3
• ANSI/ISEA 107-2015 Type R Class 3 compliant
ENSURE THE RIGHT FIT Visit JJKeller.com for size chart.
3-IN-1 PARKA JACKET TYPE R CLASS 3
• ANSI/ISEA 107-2015 Type R Class 3 compliant
• 2" serrated silver glass bead tape over 23⁄4" high-visibility orange goes over the shoulders and around the chest, torso and arms
• ANSI Class 3 compliant zip-out removable fleece liner
• Made of high-quality 450D Teflon™-treated oxford material and 280 gsm polyester fleece
• Black panels on wrists and bottom hide dirt
• 2 front pockets; 1 cell phone chest pocket with clear ID pocket; two mic tabs; 2 plastic D rings; large pouch-style pocket on back
LCT-61444
XLCT-61445
2XLCT-61446
3XLCT-61447
4XLCT-61448
• 2" silver glass bead tape goes over the shoulders and around the chest, torso and arms
• Durable 300D Teflon™-treated oxford material and 280 gsm polyester fleece
• Plastic D ring on front; hook & loop bottom and wrists
• Hook & loop cell phone pocket on front chest with clear ID pocket; 2 mic tabs
PARKA JACKET
LCT-61436
XLCT-61437
2XLCT-61438
3XLCT-61439
4XLCT-61440
5XLCT-61441
WOMEN’S SIZING
Ensure all workers have apparel that fits properly for safety and comfort.
27–32 HI-VIS APPAREL
33 GLOVES
PRO TIP:
Because women’s body measurements often differ from men’s, it’s important to offer PPE in women’s sizes. OSHA makes this position clear on their website, stating that PPE used by women should be based on female body measurement data. Moreover, whenever employers are required to purchase PPE, they should buy these items in sizes suitable for women.
Get more PPE insight at JJKellerSAFEGEAR.com
WOMEN’S SIZING
pocket on chest
Zipper closure
WOMEN’S SIZING
for attaching a fall harness on back
D-ring for tool tethering
Clear ID chest pocket
Drawstrings for adjustable waist
Great Fit for the Ladies!!!
“I love my new vest. I have plenty of pockets which is very important to me. The fit is adjustable, you can make it a little more form fitting or more roomy. The colors pop, I get compliments and I even get asked where I bought it.”
DEE | GREENFIELD, WI
WOMEN’S SIZING
WOMEN’S FIT TYPE R CLASS 2 VEST
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" ANSI-compliant silver glass bead reflective tape goes over the shoulders and around the torso
• Breathable polyester shell (machine washable)
• 2 large outer pockets (left side is a patch with no flap, and right side is flapped) and 1 external chest flapped phone pocket with pen pocket
• Sized with a women’s cut; internal drawstrings for adjustable waist; zipper closure
WOMEN’S FIT
SCT-65525
MCT-65526
LCT-65527
XLCT-65528
2XLCT-65529
3XLCT-65530
SCT-65531
MCT-65532
LCT-65533
XLCT-65534
2XLCT-65535
3XLCT-65536
NEW WOMEN’S FIT TYPE R CLASS 3 VEST
• ANSI/ISEA 107-2021 Type R Class 3 and CSA Z96-2022 Class 2 Level 2 compliant
• 2" ANSI-compliant silver reflective tape over orange, goes over the shoulders, around the torso and arms, and x-back
• Polyester shell with breathable mesh (machine washable)
• 2 large outer lower pockets with flaps; 2 external chest pockets (1 is a flapped phone pocket with pen pocket that fits most cell phones, the other has a clear front for ID
2XLCT-71006
3XLCT-71007 4XLCT-71008
• Sized with a women’s cut; internal drawstrings for adjustable waist; zipper closure WOMEN’S
WOMEN’S SIZING
WOMEN’S FIT TYPE R CLASS 2 T-SHIRT WITH POCKET
Women’s Fit Type R Class 2 T-Shirt with Pocket Visit JJKeller.com/SAFEGEAR
2XLCT-65517
3XLCT-65518
XLCT-65522
2XLCT-65523
3XLCT-65524
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" wide silver reflective tape over the shoulders and around the torso and arms
• Moisture-wicking polyester birdseye knit
• Hi-vis pink with black accent; 1 external chest pocket
SCT-69008
MCT-69009
LCT-69010
XLCT-69011
2XLCT-69012
3XLCT-69013
4XLCT-69014
5XLCT-69015
• 1 chest pocket
Common applications: delivery drivers, construction workers, parking lot attendants. WOMEN’S
WOMEN’S FIT NON-CERTIFIED T-SHIRT
• Breathable, moisture-wicking polyester birdseye knit material
• Sized with a women’s cut
• Machine washable
WOMEN’S SIZING
WOMEN’S FIT TYPE R CLASS 3 SWEATSHIRT
ALSO AVAILABLE
Men’s/Unisex sweatshirts See pages 13-15.
• ANSI/ISEA 107-2020 Type R Class 3 compliant
WOMEN’S FIT TYPE R CLASS 2
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" reflective tape goes over the shoulders and around the torso (black side doesn’t have reflective tape)
• Durable quilted polyester
• Reversible (hi-vis lime/black)
• 2 outer pockets with flap; YKK zipper closure
• Sized with a women’s cut WOMEN’S
SCT-65537
MCT-65538
LCT-65539
XLCT-65540
2XLCT-65541
3XLCT-65542
ALSO AVAILABLE
Men’s/Unisex Type R Class 2 Reversible Puffer Safety Vest See page 24.
• Reflective tape stripes go over the shoulders and around the torso and arms
• 100% polyester fleece
• 2 front pockets; drawstring hood; elastic waistband and cuffs; YKK zipper closure
• Sized with a women’s cut; full zipper closure
• Machine washable
FIT
SCT-65543
MCT-65544
LCT-65545
XLCT-65546
2XLCT-65547
3XLCT-65548
“The women’s fit items from J. J. Keller SAFEGEAR are well thought out and constructed. The quality and fit are amazing, and they look great too! You can’t beat the price and quality; I’d absolutely recommend SAFEGEAR PPE.” AUTUMN STRICKLER | BOWEN ENGINEERING | INDIANAPOLIS, IN
WOMEN’S SIZING
WOMEN’S FIT TYPE R CLASS 3 3-IN-1 REMOVABLE FLEECE-LINED PARKA JACKET
• Jacket and removable liner are both ANSI/ISEA 107-2020 Type R Class 3 compliant
ENSURE THE RIGHT FIT Visit JJKeller.com for size chart.
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE ALSO AVAILABLE
Men’s/Unisex 3-In-1 Parka Jacket See page 25.
• 2" serrated silver glass bead tape over 23⁄4" orange tape, goes over the shoulders and around the chest, torso and arms
• Durable 450D Teflon™-treated oxford material and 280 gsm polyester fleece
• 2 mic tabs; 1 hook & loop cell phone chest pocket with clear ID pocket; back pouch pocket
• Plastic D ring on front; YKK zipper closure
• Sized with a women’s cut
2XLCT-66155
3XLCT-66156
4XLCT-66595
5XLCT-66596
NEW WOMEN’S FIT
CLASS E RAIN PANTS
• ANSI/ISEA 107-2020 Supplemental Class E compliant; black pants are non-certified (combine ANSI Class 2 vest with a Class E pant for an ANSI Class 3 ensemble)
• 2" wide silver reflective tape goes around bottom of legs
• Polyurethane coated 300D oxford fabric with mesh lining
• 1 cargo pocket on right leg; zippered legs for easy on and off over shoes/boots
• Elastic waistband with drawstring WOMEN’S FIT
SCT-72240SCT-72248
MCT-72241MCT-72249 LCT-72242LCT-72250
XLCT-72243XLCT-72251
2XLCT-722442XLCT-72252
3XLCT-722453XLCT-72253
4XLCT-722464XLCT-72254
5XLCT-722475XLCT-72255
WOMEN’S SIZING
NEW WOMEN’S FIT TYPE R CLASS 3 RAIN JACKET
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• 2" silver reflective tape goes over shoulders and around the torso and arms
• Made of polyurethane coated 300D oxford fabric with mesh lining; YKK zipper closure with snap storm flap
• 2 mic tabs; 2 external lower pockets; 1 external chest flapped phone pocket with clear ID pocket; and 1 external chest zippered pocket
WOMEN’S FIT RAIN JACKET
SCT-68992
MCT-68993
LCT-68994
XLCT-68995
2XLCT-68996
3XLCT-68997
4XLCT-68998
5XLCT-68999
NEW WOMEN’S FIT NON-CERTIFIED RAIN JACKET
• Use where visibility is important, but not mandated by OSHA or ANSI standards
• 2" silver reflective tape goes over shoulders and around the torso and arms
• Made of polyurethane coated 300D oxford fabric with mesh lining; YKK zipper closure with snap storm flap
• 2 mic tabs; 2 external lower pockets; 1 external chest flapped phone pocket with clear ID pocket; and 1 external chest zippered pocket WOMEN’S FIT RAIN JACKET
2XLCT-69004
3XLCT-69005
4XLCT-69006
5XLCT-69007
WOMEN’S SIZING
See page 38 for glove size chart.
WOMEN’S FIT CUT LEVEL A3 GLOVES
• ANSI Cut Level A3 on front palm only
• Unlined spandex fabric on back of hand for breathability; terry towel thumb back; synthetic leather nail tips and finger knuckles
• Elastic wrist with synthetic leather hook & loop closure to keep debris out
• Excellent comfort and dexterity; ideal for working with sharp objects
• Touchscreen index finger and thumb
WARNING: This product can expose you to chemicals, including N,N-Dimethylformamide, which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov.
XSCT-65591
SCT-65592
MCT-65593
LCT-65594
XLCT-65595
2XLCT-65596
NEW WOMEN’S FIT TIG WELDING COWHIDE LEATHER GLOVES
• Cowhide construction offers abrasion resistance and durability
• Kevlar® lock stitching
• Seamless forefinger and wing thumb style
• 5" deep purple cow split leather cuff
Common applications: light-duty welding, construction, farming, machine operation, roping, utility work, and many other general work applications.
LCT-68866
XLCT-68867
2XLCT-68868
WOMEN’S FIT INSULATED GLOVES
XSCT-65603
SCT-65604
• Reflective piping for low-light conditions
• 3M™ Thinsulate™ with micro fleece lining
• Foam laminated spandex fabric on back of hand with nylon over neoprene knuckles; polyurethane diamond grip base palm and nail tips
MCT-65605
LCT-65606
XLCT-65607
2XLCT-65608
• Elastic wrists with synthetic leather hook & loop closure keep debris out
• Touchscreen index finger and thumb
WARNING: This product can expose you to chemicals, including N,NDimethylformamide, which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov.
HAND PROTECTION
Protect workers’ hands from exposure, impact and abrasion.
Gloves are made from various materials and designed for virtually every possible workplace hazard. Generally, there ar e four basic categories of gloves: durable work gloves, fabric gloves, chemical and liquid-resistant gloves, and insulating rubber gloves. Each purpose is to safeguard employees’ hands.
Get more PPE insight at JJKellerSAFEGEAR.com
H AND HAND PROTECTION
GENERAL PURPOSE GLOVES
HAND PROTECTION GLO
RED COWHIDE LEATHER WORK GLOVES
See page 38 for glove size chart.
NEW COWHIDE LEATHER/BLACK TWILL RIGGER GLOVES
• Cowhide leather construction (with black cotton twill glove back) offers abrasion resistance and durability with excellent dexterity
• Black fleece lining for warmth
• Wing thumb design
• Elastic knit wrist for tight fit to keep dirt and contaminants out
Common applications: construction, farming, machine operation, roping, utility work, fabrication and many other general work applications.
M CT-68869
L CT-68870
XL CT-68871
2XL CT-68872
• Cowhide construction offers abrasion resistance and durability
• Cotton glove back with red accents
• Gunn style eliminates exposed seams in palm and provides comfort fit
• Safety cuff
Common applications: construction, contractors, gardening, general assembly, and maintenance.
Per pair pricing
SCT-64310
MCT-64311
LCT-64307
XLCT-64308
2XLCT-64312
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov.
HAND PROTECTION
HI-VIS GOATSKIN GLOVES
Insulated glove has cotton fleece liner
SIZING IS IMPORTANT
See page 38 for glove size chart.
LEATHER WORK GLOVES
• Reflective knuckle straps are appropriate for lowvisibility conditions or at night
• Cowhide split leather palms and fingertips; hi-vis back; safety cuff
• Available unlined or with moisture-wicking insulated cotton fleece lining
Common applications: light-duty welding, construction, transportation, farming, machine operation, roping and utility work.
• Reflective tape on back side for low-visibility conditions or at night
• Premium quality goatskin leather construction and cotton fleece liner enhances feel and durability
• Rubberized safety cuff for added protection
• Full leather fingertips
MCT-65274
LCT-65275
XLCT-65276
XXLCT-65277
WARNING:
pair pricing
SCT-64384
MCT-64329
LCT-64330
XLCT-64331
2XLCT-64332
SCT-64883
MCT-64884
LCT-64885
XLCT-64886
2XLCT-64887
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds),
Insulated glove has cotton fleece liner
HAND PROTECTION
NITRILE NYLON KNIT GLOVES
• Nylon gloves coated on palms and top of fingers with black nitrile for superior grip
• Ultra-lightweight knit wrist
• Style is breathable and foam finished
• Superior form, fit and feel reduces hand fatigue
Common applications: handling small oily parts and components, machining, micro-engineering, working with automo tive components, painting, general assembly, horticulture and maintenance.
SMOOTH-PALM GLOVES
48-119
GRIP-DOT PALM GLOVES
48-119
Per pair pricing
MCT-58081
LCT-58082
XLCT-58083
Per pair pricing
MCT-58084
LCT-58085
XLCT-58086
Reflective tape on fingertips and knuckles
See page 38 for glove size chart.
HI-VIS DEXTERITY GRIP GLOVES
The leather base with silicon printing make this glove ideal for situations where grip and dexterity are important, while the reflective fingertips make it ideal for use in low-visibility conditions or at night.
SCT-64511
MCT-64512
LCT-64513
XLCT-64514
2XLCT-64515
HAND PROTECTION
DRIVER GLOVES
LEATHER DRIVER GLOVES
• Top-grain cowhide leather
• Keystone thumb provides additional durability and comfort
• Abrasion resistance and excellent dexterity
Common applications: light-duty welding, construction, farming, machine operation, roping, utility work, and other general work applications.
NON-INSULATED LEATHER DRIVER GLOVES
Insulated glove has cotton fleece liner
COWHIDE DRIVER GLOVES
• Top-grain cowhide construction offers excellent strength and durability
• Hi-vis orange fingertips; keystone thumb
• “Watch Your Hands” message on back helps increase safety awareness
• Color-coded hem to identify sizes
SCT-67279
MCT-67280
LCT-67281
XLCT-67282
2XLCT-67283
SCT-61118
MCT-65396
LCT-65402
XLCT-65403
2XLCT-61122
SCT-65404
MCT-65405
LCT-65406
XLCT-65407
2XLCT-65408
WARNING: This product can expose you to chemicals, including Chromium (hexavalent compounds), which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
SIZING IS IMPORTANT
How To Choose The Proper Glove Size Choosing properly sized gloves is just as important as the type of glove you choose. Measure the circumference of your hand as illustrated here and compare it to the sizing chart below.
HAND PROTECTION
CUT- AND ABRASION-RESISTANT GLOVES
NITRILE CUT LEVEL A2 GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
GRAY KNIT RUBBER PALM GLOVES
• 70% polyester/30% cotton lining
• 15-gauge glass fiber knit and polyester materials for enhanced cut protection
• Nitrile palm coating improves durability, grip and comfort
CUT LEVEL A2 GLOVES
Mechanics
• 100% latex crinkle coating on palm and fingertips protects hands from abrasion and cuts; provides durability and comfort
• Knit cuff
Common applications: road construction, railroad, municipal utilities and landscaping.
HAND PROTECTION
POLYURETHANE DIPPED CUT LEVEL A3 GLOVES
•
• ANSI/ISEA
• Flat dip polyurethane palm coating improves grip; ideal for handling small oily parts; uncoated back for
• ANSI/ISEA 105-2016 compliant
• Flat dip polyurethane palm coating improves grip and protects against nicks and cuts
• Elastic wrist for tight fit to keep dirt and contaminants out
• Touchscreen fingertips
XSCT-64896
SCT-64829
MCT-64901
LCT-64903
XLCT-64905
2XLCT-64907
Employees’ hands are their most valuable tools. It’s no secret that cuts, abrasions, lacerations, and even scrapes from sharp hazards can keep employees out of work. That’s why it’s important you provide them dipped palm gloves, including ones made from latex, polyurethane, and nitrile, when they work with knives or other sharp objects. These types of gloves are meant to protect workers’ palms and fingers. Ensure you provide the right protection for the job! Get more PPE insight at JJKellerSAFEGEAR.com
HAND PROTECTION
NITRILE COATED CUT LEVEL A5 GLOVES
• ANSI/ISEA 105-2016 compliant
• Nitrile coating ideal for handling small objects, even when oily
• Uncoated back for breathability; 25% steel fiber, 30% HPPE, 20% nylon, 20% cotton, and 5% spandex
• Elastic wrist for tight fit to keep dirt and contaminants out
• Touchscreen compatible
• Ideal for jobs with high cut hazards
• Touchscreen fingertips
SCT-67300
MCT-67301
LCT-67302
XLCT-67303
2XLCT-67304
UNCOATED CUT LEVEL A5 GLOVES
• ANSI/ISEA 105-2016 compliant
• Made of 30% steel fiber; excellent comfort and dexterity
• Elastic wrist for tight fit to keep dirt and contaminants out
• Ideal for handling sharp objects; excellent comfort and dexterity
• Touchscreen fingertips
MCT-64919
LCT-64921
XLCT-64923
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
HAND PROTECTION
NITRILE COATED CUT LEVEL A6 GLOVES
• ANSI/ISEA 105-2016 compliant
• Nitrile coating ideal for handling small objects, even when oily; uncoated back for breathability
• Elastic wrist for tight fit to keep dirt and contaminants out
• Excellent comfort and dexterity
• Ideal for heavy-duty cut hazards
• Touchscreen fingertips
NITRILE COATED CUT LEVEL A6 GLOVES
SCT-64925
MCT-64927
LCT-64929
XLCT-64931
CUT LEVEL A7 GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
• Steel fiber and HPPE knit materials for enhanced cut protection
• Molded TPR armor for full dorsal cut protection
• High visibility
Common applications: construction, oil/gas drilling, extraction/refining, fracking, tool pushing, mining, demolition, heavy construction, cargo handling, mechanics and petrochem.
LCT-59781 XLCT-59782
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
Conduct a survey to determine if any hazards are present that would necessitate the use of gloves. When conducting a hazard assessment, evaluate whether the machine guards, other engineering controls, and good work procedures in place give workers enough protection. If they do not, you may need to provide PPE such as gloves to protect workers’ hands.
Get more PPE insight at JJKellerSAFEGEAR.com
HAND PROTECTION
NITRILE COATED CUT LEVEL A8 GLOVES
• ANSI/ISEA 105-2016 compliant
• Nitrile coating ideal for handling small objects, even when oily
• Uncoated back for breathability; 40% steel fiber, 20% HPPE, 15% nylon, 20% cotton, and 5% spandex
• Elastic wrist for tight fit to keep dirt and contaminants out
• Touchscreen compatible
• Ideal for jobs with high cut hazards
• Touchscreen fingertips
XLCT-67290
2XLCT-67291
NITRILE COATED CUT LEVEL A9 GLOVES
• ANSI/ISEA 105-2016 compliant
• Nitrile coating ideal for handling small objects, even when oily
• Uncoated back for breathability; 10% steel fiber, 30% tungsten wire, 20% HPPE, 15% nylon, 20% cotton, and 5% spandex
• Elastic wrist for tight fit to keep dirt and contaminants out
• Touchscreen compatible
• Ideal for jobs with high cut hazards
• Touchscreen fingertips
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
WARNING:
See page 38 for glove size chart.
HAND PROTECTION
HEAT LEVEL GLOVES
HEAT LEVEL 2 GLOVES
HEAT LEVEL 3 GLOVES
• ANSI/ISEA 105-2016 compliant
• ANSI/ISEA 105-2016 compliant
• Latex coating for improved grip
• Hi-vis yellow back to easily identify workers wearing the correct gloves; 10% steel fiber, 50% aramid fiber, 10% nylon, and 30% cotton
• Ideal in situations where workers need to protect their hands from hot objects
HEAT LEVEL 2 GLOVES
1-9 $14.99
Per pair pricing
LCT-67305
XLCT-67306
IS IMPORTANT
See page 38 for glove size chart.
• Aramid shell with silicone dots for better grip
• Lining: 65% polyester and 35% cotton
• Ideal in situations where workers need to protect their hands from hot objects SIZING
25-99
M/LCT-67309
L/XLCT-67310
PRO TIP:
HEAT LEVELS
2XLCT-67307
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
Hot surfaces are serious workplace hazards for workers. Use properly rated heat-resistant gloves to protect your workers from burns. ANSI/ISEA 105-2016, American National Standard Protection Classification, provides employers guidance on glove and hand protection. It references a thermal testing standard, ASTM F1060, for heat-resistance levels. After conducting a thorough PPE assessment, employers must understand these levels to choose the right gloves.
HAND PROTECTION
COLD PROTECTION GLOVES
(PU) football serino palm patch and foam padding.
Polyurethane (PU) football serino fingertips.
Foam laminated spandex fabric with rubber bumpers.
Reflective tape fingertips are appropriate for low-visibility conditions or at night.
Winter Jackets See pages 21-25, 31.
Hats See page 69.
Cleats See page 70.
HI-VIS COLD STORAGE WINTER GLOVES
• Heavy-duty gloves ideal for working in cold weather and cold storage environments
• Micro fleece lining with 3M™ Thinsulate™ 40 gsm insulation, 2mm foam, and water barrier
Guard® Clip Pack Visit JJKeller.com/SAFEGEAR
Common applications: light-duty welding, construction, farming, machine operation, roping, and utility work.
COLD STORAGE GLOVES
Hands are essential for performing almost all task workers perform — why not keep them safe? By keeping their hands well-protected and warm, workers can focus on the task at hand and stay productive! Cold-weather injuries such as frostbite and frostnip are preventable. By keeping their hands warm, workers reduce their exposure to cold-stress injuries.
THERMAL FOAM DIPPED NITRILE WINTER GLOVES
• Foam latex coated palm and fingers
• Waterproof to wrist cuff
• 13-gauge thermal liner
• Elastic wrist for secure fit
WARNING: This product can expose you to chemicals, including
State of California to cause cancer and birth defects or other reproductive
go to www.p65warnings.ca.gov
HAND PROTECTION
FINGERLESS FLIP-TOP MITTENS
• Made of 50% wool, 40% polyester, and 10% acrylic
• Pigskin leather palm; 3M Thinsulate™ lining
• Rib-knit cuff keeps out cold drafts
• Convert mitten to half-finger work gloves by pulling back the top; flap secures with hook & loop for quick on/off
MCT-67313
LCT-67314
XLCT-67315
2XLCT-67316
2XLCT-67288
THERMA-FIT COLD WEATHER GLOVES
• 100% polyester with terry cotton lining
• Rough textured grip; natural latex crinkle coating on palm and fingertips protects hands from abrasion, cuts, punctures and tears
• Knit cuff
• Ideal for work in cold environments
SCT-64876 MCT-64878
LCT-64880 XLCT-64882
Cut-Resistant Gloves See pages 39-43.
SIZING IS IMPORTANT See page 38 for glove size chart.
MECHANICS GLOVES
HAND PROTECTION
IMPACT-REDUCTION MECHANICS GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
• Breathable polyester construction with palm padding
• TPR impact back
• Stretch spandex cuff with hook & loop closure
• Touchscreen capable
XLCT-59784
BLACK AND GOLD COWHIDE MECHANICS GLOVES
• Cowhide construction and spandex back offer abrasion resistance, durability and precision fit
• Double stitched design with reinforced palm and thumb
• Elastic cuff with hook & loop closure
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
MECHANICS GLOVES
SCT-64381
MCT-64313
LCT-64314
XLCT-64315
2XLCT-64316
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov.
LEATHER – Leather work gloves are best for protection from rough objects, sparks and heat, and for cushioning from blows in heavy-duty work environments. All kinds of leather provide comfort, durability, dexterity, mild heat resistance, and abrasion protection. Leather work gloves also provide firmer grip when operating forklifts and other vehicles. These advantages make leather a traditional favorite of industrial workers.
NITRILE – Nitrile gloves are waterproof, grease proof, oil proof, and chemical resistant to a range of common chemicals and substances. They are also puncture resistant. They are commonly used in applications that require sensitivity and dexterity and when grip is important.
VINYL PVC – Gloves with PVC vinyl coating are made of durable, waterproof and chemical-resistant coated material for secure protection in harsh environments. It also keeps work gloves soft in cold temperatures.
PRO TIP: FUNCTIONALITY THAT MATCHES THE JOB
CUT RESISTANT – Cut-resistant gloves are designed to protect employees’ hands from cuts while working with sharp tools, objects or materials. Gloves with an EN 388 2016 rating are tested by a third party and rated for abrasion, tear, cut, impact, and puncture resistance. ANSI cut resistance is rated on a scale of A1-A9.
PUNCTURE-RESISTANT – From general maintenance to construction, brickwork to glass handling, employees encounter puncture hazards constantly. Wearing appropriate punctureresistant gloves (rated from Level 1 – 5, based on the EN 388 and ANSI/ISEA 105 Standards) will help protect employees from injury.
IMPACT REDUCTION – Crushing, pinching, cutting and puncture hazards lead to most of the serious hand injuries sustained by workers. Impact-reduction gloves are designed to prevent injuries in industries where there is a high risk of crushing hazards. These gloves cushion impact and protect from protruding corners, edges, exposed beams and vulnerable pipes.
HAND PROTECTION
OIL-RESISTANT GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
• Textured PVC vinyl coating
• Safety cuff
Common applications: outdoor construction, conducting refuse collection, general carpentry, warehousing.
GLOVES
LCT-71969
XLCT-59553
2XLCT-61021
ALSO AVAILABLE
Cut-Resistant Gloves. See pages 39-43.
WELDING GLOVES
TIG WELDING GLOVES
• Cowhide construction offers abrasion resistance and durability
• Kevlar® lock stitching
• Seamless forefinger, wing thumb style
• 4" cowhide split leather safety cuff
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
2XLCT-64324
WELDING GLOVES
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov.
Welding is serious work that leaves employees prone to smash, caught-in, pinched, cut and burn hazards. Since employees’ hands are their primary and most important tool during welding operations, they require special protection. Remember, the goal every day is to get employees home the way they came into work: safe and in one piece! Get more PPE insight at JJKellerSAFEGEAR.com
Women’s Fit TIG Welding Cowhide Leather Gloves See page 33.
Glove Guard® Clip Pack Visit JJKeller.com/SAFEGEAR
SIZING
See page 38 for glove size chart.
EYE PROTECTION
Protect workers’ eyes from flying debris, impact, and chemical splashes.
50–55 SAFETY GLASSES
56 SAFETY GOGGLES
PRO TIP:
Every year, many employees are seriously injured by flying particles, shrapnel, and hazardous chemicals or materials. OSHA requires that safety glasses meet ANSI consensus standards to adequately protect employees from these hazards. In addition, whatever eye protection you choose, make sure it protects against the hazards employees face on the job. For example, face protection and goggles, not glasses, will adequately protect employees from chemical splashes. Choose the right equipment!
Get more PPE insight at JJKellerSAFEGEAR.com
EYE PROTECTION
EYE PROTECTION
CT-66190
SAFETY GLASSES
• ANSI Z87.1 compliant
• 99.9% UV protection
• Clear frame with front and side impact protection
• Lightweight, comfortable fit
LENS (AS/AF)
Per pair pricing
“My sales rep sent me some samples of J. J. Keller® SAFEGEAR® gloves and glasses to try, and the employees loved them. To me, comfort and protection are the most important factors when choosing PPE. SAFEGEAR offers both. Our company deals with melted plastic at temperatures of 600 degrees or more, so my workers’ gloves need to be comfortable and breathable. Being able to buy SAFEGEAR in volume helped me save on price, which was a big win. And the customer service I get from my rep is great; she’s very responsive.”
GARY HARGIS | PITT PLASTICS | PITTSBURG, KS
UV 400 SAFETY GLASSES
• ANSI Z87.1 compliant
• UV 400 protection
• Side impact protection
• Lightweight, comfortable fit
CLEAR FRAME
CT-59789
CT-66189
CT-66190
• Anti-scratch/anti-fog (AS/AF)
• Amber lens, ideal for driving
Per pair pricing
• Anti-scratch/anti-fog (AS/AF)
• Anti-scratch/anti-fog (AS/AF)
• Pink arms
Per pair pricing CT-59787• Anti-scratch (AS)
Anti-scratch/anti-fog
• UV 400 protection
• Front and side impact protection
EYE PROTECTION
SAFETY OPTICAL CLASS 1 GLASSES
• ANSI Z87.1 compliant
• Optical Class 1 for high optical clarity
• Polycarbonate clear lens offers excellent impact resistance
• Anti-scratch/anti-fog (AS/AF)
• 99.9% UV protection
• Soft nose bridge and rubber tip arms for added comfort
CT-65409Pink arms
CT-66181Lime arms
CT-66182Orange arms
CT-66183Red arms
CT-66184Blue arms
CT-66185Black arms
CT-66186Purple arms
CT-66188Green arms
PRO TIP: ANSI Z87.1
BROW PROTECTION
SAFETY GLASSES
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit with extra brow protection
Eye injuries can occur from impacts, heat, dust, chemicals, and optical radiation. Eye protection meeting ANSI Z87.1 ensures workers are protected from these hazards and includes primary protectors such as eye spectacles and safety goggles. Secondary protectors, such as face shields, provide an additional layer of protection to workers’ eyes. Primary eye protection uses lenses, frames, and side shield components to protect workers’ eyes. In contrast, windows, shields, and headgear on secondary protectors guard against eye injuries. Get more PPE insight at JJKellerSAFEGEAR.com
EYE PROTECTION
SAFETY GLASSES WITH BLACK FRAMES
• ANSI Z87.1 compliant
Very comfortable, less expensive.
“I purchased these glasses for our supervisor and above level and they like them very much.”
SAFETY MAN | PITTSBURG, KANSAS
SAFETY GLASSES WITH RUBBER TIPS
• Meets ANSI Z87.1-2015
Standard
• 99.9% UV protection
• Lightweight with rubber ends for all-day comfort
PRO
TIP: RUBBER TIPS
• 99.9% UV protection
• Lightweight for all-day comfort
(AS/AF)
CT-60860• Mirror smoke lens
CT-59792
• Gray lens with darkening effect (for outdoor
• Anti-scratch/anti-fog (AS/AF)
Maximize the comfort of your eyewear and its fit against your head by using rubbed-tipped safety glasses. Safety glasses can slip forward from workers’ faces while sweating or working in wet locations. Rubber tips on eye protection can minimize this issue while ensuring workers’ safety glasses stay positioned when it matters the most during work activities. Get more PPE insight at JJKellerSAFEGEAR.com
Quick Service and Delivery “Great products.”
RICKLOE | CT
Employees are more likely to wear safety glasses that are comfortable, look fashionable, and function seamlessly. Different frames, lens colors, and coatings can add to the functionality of safety glasses while still adhering to ANSI Eye Protection Standards.
EYE PROTECTION
SAFETY GLASSES
• Meets ANSI Z87.1-2015 Standard
• 99.9% UV protection
• Lightweight with rubber ends for all-day comfort
• Anti-scratch coating for longer lens life
• Anti-fog reduces fogging to maintain clear vision
CLEAR LENS
CT-59802
• Orange accent color
• Clear lens
• Anti-scratch/anti-fog (AS/AF)
• Lime accent color
• Clear lens
CT-59804
• Orange accent color
• Black mirror indoor/ outdoor lens
• Anti-scratch (AS)
• Lime accent color
CT-59803
LENS COLORS
LENS COLORHOW IT WORKSAPPLICATIONS
Clear Allows maximum amount of light to pass through the lens without distorting colors; provides maximum visual clarity
Blue Reduces glare and yellow light; minimizes eye strain and fatigue
Grey Limits how much light can pass through the lens; reduces outdoor glare; provides most accurate color visibility
Amber Enhances light and contrast; brightens environments; reduces haze and glare; blocks blue light
CT-59805
• Anti-scratch/anti-fog (AS/AF)
• Black mirror indoor/ outdoor lens
• Anti-scratch (AS)
PRO TIP: ULTRAVIOLET LIGHT
UVA rays account for about 95% of the sun’s rays that aren’t filtered out by the earth’s atmosphere, and UVB rays account for less than 5% of unfiltered rays. Besides causing damage to skin, these UV rays can also damage workers’ eyes as well as cause eye cancers and diseases. UV-blocking safety glasses can prevent these injuries by reducing and blocking out harmful UV rays.
Get more PPE insight at JJKellerSAFEGEAR.com
Standard for most safety glasses; low-light or indoor use
Low-light conditions (indoor and outdoor use)
Environments where bright light conditions can cause eye fatigue
Low-light conditions (indoor and outdoor use)
*Not recommended for night use
LENS COATINGS
COATINGHOW IT WORKS
Anti-Scratch (AS) Anti-Scratch safety glasses are treated with a scratchresistant coating on the lens that strengthens the surface to show fewer scratches.
Anti-Fog (AF) Temperature changes and humidity can cause safety glasses to fog. Removing glasses to wipe away moisture exposes workers to potential hazards. Anti-Fog coating reduces or eliminates fogging to maintain clear vision.
EYE PROTECTION
SAFETY GLASSES WITH INNER GASKET
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit
• Sport style with interchangeable headband
• EVA Foam inside frame provides tight fit and protects from dry particulate and liquid chemical materials
GLASSES WITH INNER GASKET
CT-64403
CT-64611
• Smoke lens
• Anti-scratch/anti-fog (AS/AF)
• Clear lens
• Anti-scratch/anti-fog (AS/AF)
Includes interchangeable temples
ADJUSTABLE TEMPLE SAFETY GLASSES
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit
• Traditional style with round lens, molded nose bridge, and adjustable angle/length legs
CT-64402
Per pair pricing
• Anti-scratch/anti-fog (AS/AF)
NEW LED GLASSES
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit
• The super bright pivoting LED bulbs (3 lumens per side) provide bright light while keeping hands free
• Easy-to-use push button on/off switches located at the top of each temple
• 3.0V Litium-Manganese button cell, battery code CR2032; 50 hours working time before batteries need to be replaced
• UV380 protection
• Anti-scratch strengthens lens surface to show fewer scratches
LED GLASSES
CT-71930• Anti-scratch (AS)
EYE PROTECTION
SAFETY GLASSES WITH SIDE PROTECTION
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit with PC lens, nylon frame, adjustable temple legs, and side shield for extra protection
SIDE PROTECTION GLASSES
CT-64404
FULL-FRAME SAFETY GLASSES
• ANSI Z87.1-2015 compliant
• Lightweight, flexible frame provides comfortable fit
• Extended peripheral view
FULL-FRAME GLASSES
• Anti-scratch/anti-fog (AS/AF)
OVER-THE-GLASSES GLASSES
• ANSI Z87.1-2003 compliant
• Provides 99.9% UV protection
• Wraparound style
• Molded-in browguard
• Vented side shields
• Can be worn over regular Rx eyewear
• Great option for temporary workers or visitors
CLEAR FRAME
CT-59811 • Clear lens • Anti-fog (AF)
EYE PROTECTION
SAFETY GOGGLES
• ANSI Z87.1-2010 compliant
• Provides 99.9% UV protection
• Can be worn with most halfmask respirators
Adjustable strap for comfortable fit
• Clear, anti-fog reduces fogging to maintain clear vision
venting prevents directing venting to interior
CT-59808
CT-59809
• Direct vent (perforated)
• Anti-fog (AF)
• Indirect vent
• Anti-fog (AF) for
Goggles offer more protection than regular safety glasses because they fit to the worker’s face, providing a seal. Indirect venting goggles have an angled venting system that prevents direct venting to the interior of the goggles. This offers excellent protection from dry particulate and liquid chemical materials. Direct venting goggles have ventilation holes in the frame that allow air to circulate to the interior of the goggles. However, the holes are small enough to prevent flying particles from reaching the eyes. Direct venting goggles shouldn’t be used if employees could be exposed to splashed chemicals, but are a good choice if high humidity and lens fogging is a concern. Get more PPE insight at JJKellerSAFEGEAR.com
ADJUSTABLE MOLDED SAFETY GOGGLES
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit with adjustable, elastic headband
• Soft rubber seal molds to face, protecting eyes from all sides
• Anti-fog reduces fogging to maintain clear vision
• Anti-scratch strengthens lens surface to show fewer scratches
HEAD PROTECTION
Ensure workers’ heads are protected from impact and falling debris.
VENTED VS. UNVENTED
Employees are likely to use comfortable PPE. Employers should consider comfort, fit and style while selecting PPE. An unvented hard hat can trap heat and humidity, causing discomfort to its user. Using a vented hard hat promotes airflow that keeps workers comfortable. Use a non-vented protective helmet if electrical hazards are present. Vents are a potential access point for electrical hazards. Avoid using vented helmets when the highest level of electrical protection is needed. Get more PPE insight at JJKellerSAFEGEAR.com
HEAD PROTECTION
CAP STYLE HARD HAT
HEAD PROTECTION
RATCHET HARD HATS (TYPE I)
• Vented hats meet ANSI Z89.1-2014, Class C requirements
• Unvented hats meet ANSI Z89.1-2014, Class E requirements
• Meet requirements for “reverse wearing” and “extreme cold”
• 4-point woven nylon suspension with Slide-Lock or Mega Ratchet® size adjustment for head sizes 6.5-8
• Moisture-wicking brow pad is removable, washable and replaceable
• Vented options allow increased air circulation
• Available in full brim or cap style (cap style accommodates 2-point chin strap)
• Accessory slots accommodate a variety of eye, face and hearing products
• Made in U.S.A.
FULL BRIM HARD HAT
Using proper head protection is essential to protect workers’ heads from falling objects, bumps, or impacts. Type I hard hats offer protection from overhead falling objects, whereas Type II safety helmets also provide lateral protection. Employers must assess workers’ exposure to hazards and select the correct head protection to protect workers. Full brim hard hats and facing the bill forward all deflect falling objects away from workers’ faces. Get more PPE insight at JJKellerSAFEGEAR.com
HEAD PROTECTION
NEW AMERICANA SAFETY HELMETS (TYPE II)
• Vented helmets are ANSI/ISEA Z89.1 Class C; unvented are Class E & G
• Safety Equipment Institute (SEI) certified
• Meet the low temperature (LT) option of the Z89.1 standard
• 4-point woven nylon suspension with Mega Ratchet® size adjustment for head sizes 6.5-8 as well as goggle retaining slots
• 4-point chinstrap made of durable nylon with woven webbing and slider size adjustments with deluxe chin guard
• Feature a short peak and low profile
• Feature an insert that protects the wearer from lateral and top impacts to the helmet
•Moisture-wicking brow pad is removable, washable and replaceable
HELMET VENTED
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE
PRO TIP:
In 2020, 43,540 workers suffered nonfatal head injuries involving days away from work. Hard hats and climbing-style safety helmets both offer protection, but because helmets offer both top and lateral protection, a growing number of employers nationally are choosing to ue Type II helmets for their workers, recognizing the benefits of added head protection. Get more PPE insight at JJKellerSAFEGEAR.com
BASEBALL STYLE BUMP CAPS
• Reflective accents keep workers seen and safe
• Internal plastic shell with shock absorption EVA pad
• Side breathable mesh for ventilation
• Lightweight design for easy carry and storage
•Machine washable (remove plastic shell before washing)
HEARING PROTECTION
Protect workers from noise levels that can damage their hearing.
61 REUSABLE
61 DISPOSABLE
PRO TIP:
Hearing protection devices (HPDs) filter out loud noise. This means they do not block out sound completely, but they reduce the amount of sound reaching the delicate parts of the ear. By doing so, they offer some protection so that hearing will not get overloaded by the surrounding noises (glare) that interfere with speech and machinery sounds. Get more PPE insight at JJKellerSAFEGEAR.com
HE ARING HEARING PROTECTION
HEARING PROTECTION
REUSABLE EARPLUGS
• ANSI S3.19-1974 compliant
• Noise Reduction Rating (NRR) 26
• Pre-molded triple flange silicone designed to conform to ear canal shape for optimal hearing protection
• Material is washable
• Hi-vis yellow makes compliance checks quick and easy
• Reusable to reduce cost and waste
• Individually packaged per pair
Recommended for job applications involving assembly and mechanical tasks, chipping, chiseling, cleaning, drilling, furnace operations, grinding, heavy equipment operations, machining, metal repair, painting, pouring/casting, power fastening, riveting, sanding, sawing and welding.
PRO TIP: HEARING PROTECTION DEVICES (HPD)
Noise Reduction Rating (NRR) is only one selection factor for HPDs. Fit and comfort are also important. According to OSHA’s compliance directive, CPL 02-01-050 — Enforcement Guidance for Protective Equipment in General Industry: “Employees shall be given the opportunity to select their hearing protectors from a variety of suitable hearing protectors provided by the employer” (29 CFR 1910.95(i)(3)). Because ears and ear canals come in various shapes and sizes, you may have to provide several earplug and muff styles so each worker who needs them can find a good fit — one that’s comfortable enough to increase the likelihood of the HPDs being worn consistently. Get more PPE insight at JJKellerSAFEGEAR.com
J. J. Keller Advantage members get FREE SHIPPING! Take advantage at JJKeller.com/SAVE
DISPOSABLE EARPLUGS
• ANSI S3.19-1974 compliant
• Noise Reduction Rating (NRR) 31
• Contoured for easy insertion and comfort
• Foam earplug expands gradually for a secure fit
• Hi-vis yellow makes compliance checks quick and easy ecure fi ye ick and
SEASONAL
Keep your workers visible and protect them from weather-related conditions with seasonal gear they can keep close at hand.
INDOOR HEAT STRESS
Employees should practice heat stress prevention year-round! Employers must ensure workers can access resources such as drinking water, shade, and seasonal PPE like cooling, rain, and winter gear. Wearing layers of PPE, warm indoor working environments, and heat-producing equipment can all contribute to heat stress during cooler months. Get more PPE insight at JJKellerSAFEGEAR.com
SEASON AL SEASONAL
SEASONAL
RAIN GEAR
RAIN PANTS
RAIN JACKET
• ANSI/ISEA 107-2020 Type R Class 3 compliant
Hole for attaching a fall harness on back
• Meets ANSI Supplemental Class E Standards
• 2" ANSI-compliant silver reflective tape
• Black bottom and knee patches hide dirt
• Drawstring waist for tighter fit
• Zipper leg openings extend to knees for easy on/off over shoes or boots
• 2" ANSI-compliant silver reflective tape
• Made of 300D oxford fabric with 190T tafetta lining; YKK zipper
• Black bottom, cuffs and elbow patches hide dirt
• 2 mic tabs; drawstring hood; and front clear ID pocket
RAIN JACKET
SCT-62702
MCT-62703
LCT-62704
XLCT-62705
2XLCT-62706
3XLCT-62707
4XLCT-62708
5XLCT-62709
RAIN PANTS
Single pants pricing
LIME
SCT-62710
MCT-63371
LCT-63372
XLCT-63373
2XLCT-63374
ANSI CLASS E
3XLCT-63375
4XLCT-63376
5XLCT-63377
SEASONAL
COOLING GEAR
NEW SLEEVELESS COOLING SHIRTS
• ANSI-ISEA 107-2020 Type R Class 2 compliant t-shirt features 2" silver reflective serrated tape that goes over the shoulders and around the torso
• Non-certified t-shirt features reflective tape at the sides for added visibility
• Lightweight, breathable ChillSoft® fabric that’s cool to the touch
• 4-way fabric stretch moves easily and naturally with the worker’s body for all-day comfort
• Side vents for added comfort and ease of movement
3XLCT-73932
4XLCT-73933
5XLCT-73934
• Active moisture-wicking technology disperses moisture for rapid evaporation
Although OSHA does not have a standard that specifically addresses employee exposures to extreme heat, the agency does encourage employers to take steps to prevent heat-related illnesses. OSHA inspectors do conduct heat inspections and do issue General Duty Clause citations when heat hazards are present.
SEASONAL
NEW SHORT-SLEEVED COOLING SHIRTS
• ANSI-ISEA 107-2020 Type R Class 2 compliant t-shirt features 2" silver reflective serrated tape that goes over the shoulders and around the torso
• Non-certified t-shirt features reflective tape at the sides for added visibility
• Lightweight, breathable ChillSoft® fabric that’s cool to the touch
• 4-way fabric stretch moves easily and naturally with the worker’s body for all-day comfort
• Side vents for added comfort and ease of movement
SCT-73919
MCT-73920
LCT-73921
XLCT-73922
2XLCT-73923
3XLCT-73924
4XLCT-73925
5XLCT-73926
SCT-73911
MCT-73912
LCT-73913
XLCT-73914
2XLCT-73915
3XLCT-73916
4XLCT-73917
5XLCT-73918
• Active moisture-wicking technology disperses moisture for rapid evaporation
PRO TIP:
OSHA implemented the Outdoor and Indoor Heat-Related Hazards NEP (National Emphasis Program) — OSHA Instruction - CPL 03-00-024 — on April 8, 2022, to focus on specific activities and industries where workers may be exposed to extreme heat situations. The NEP is not a mandate or regulation, but rather provides an enforcement program targeting specific high-hazard industries or workplace activities where heatrelated injuries or illness could occur if not managed. Examples related to this NEP could be working outdoors during a heat wave or working indoors near radiant heat sources like commercial dryers or metal-working foundries.
Get more PPE insight at JJKellerSAFEGEAR.com
SEASONAL
NEW WOMEN’S FIT V-NECK COOLING T-SHIRT
• ANSI-ISEA 107-2020 Type R Class 2 compliant
ALSO AVAILABLE
Women’s Fit V-Neck Non-Certified T-Shirt Visit JJKeller.com/SAFEGEAR
Check out our NEW PPE in Women’s Sizing. See pages 26-33.
• 2" silver reflective serrated tape goes over the shoulders and around the torso
• Lightweight, breathable ChillSoft® fabric, cool to the touch; 4-way fabric stretch and side vents for flexibility and all-day comfort
• Active moisture-wicking technology disperses moisture for rapid evaporation
• Additional layer of fabric in front for enhanced modesty and coverage
• Sized with a women’s cut
WOMEN’S FIT
SCT-73957
MCT-73958
LCT-73959
XLCT-73960
2XLCT-73961
3XLCT-73962
NEW LONG-SLEEVED COOLING T-SHIRT
• ANSI-ISEA 107-2020 Type R Class 2 compliant
• 2" silver reflective serrated tape goes over the shoulders and around the torso
• Breathable ChillSoft® fabric, cool to the touch
• Lightweight 4-way fabric stretch for flexibility and all-day comfort
• Active moisture-wicking technology disperses moisture for rapid evaporation
• Side vents for added comfort and ease of movement
TYPE R CLASS 3
SCT-74972
MCT-74973
LCT-74974
XLCT-74975
2XLCT-74976
3XLCT-74977
4XLCT-74978
5XLCT-74979
ADD IMPRINT
Call 833-806-6999 for imprint locations and pricing.
Call
ALSO AVAILABLE
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE
Heat Illness and Injury Prevention Training See page 81.
Non-Certified Long Sleeved Cooling T-Shirt Visit JJKeller.com/SAFEGEAR
SEASONAL
NEW FLEXIFREEZE® PROFESSIONAL SERIES ICE VEST® TYPE O CLASS I
This vest harnesses the power of 96 ice cubes to effectively lower a worker’s core temperature. It removes 35% more heat than gel or evaporative solutions. Cooling lasts 1-1.5 hours depending on ambient air temperature, humidity level, body size, and activity.
• Hi-vis vest is Type O Class 1 compliant
• Soft, flexible, insulating neoprene and rip-stop shell with YKK zipper closure
• Lightweight (3.5 lbs. including ice panels), with full range of motion
• Adjustable shoulders and sides
• 3-piece ice panel set included, along with instructions
• Hook & loop makes swapping out ice panels fast and easy
• 2 large front pockets are perfect for a cell phone and keys
• Machine washable (mesh laundry bag included)
• Soak in water 2-5 minutes to activate
• Remains hydrated up to 4 hours
• Reusable, just re-soak
NEW FLEXIFREEZE® COOLING COLLAR WITH 2 ICE STRIPS
This collar uses the heat-absorbing power of ice to effectively draw heat away from the back of the neck as it thaws to help keep workers cool and comfortable in hot environments.
• Includes 1 collar and 2 FlexiFreeze® 8-cube ice strips (food-grade plastic ice sheets)
• Soft inner lining for comfort
• Breakaway adjustable hook & loop fastener for comfortable fit range: S (15") neck to L (24") neck
• Hook & loop makes swapping out ice panels fast and easy
• Machine washable
ALSO AVAILABLE
Flexifreeze® Cooling Collar 8-Cube Ice Strip for Cooling Collar, 6 Pack Visit JJKeller.com/Cooling
SEASONAL
HI-VIS RANGER SUN HAT
• ANSI compliant high-visibility lime fabric with 1" reflective tape
• Breathable mesh venting for air flow
• Wide brim helps shade face and head
• Drawstring cord
• Machine washable
COOLING BANDANA
• Advanced PVA material retains water
• Fights the effects of heat stress and fatigue
• Cools for up to four hours
• Reusable by re-soaking to activate
• Tie closure for personalized fit
NEW HI-VIS COOLING NECK SHADE/GAITER
• Lightweight, breathable, 4-way stretch ChillSoft® fabric that is cool to the touch
• Active moisture-wicking technology spreads moisture for rapid evaporation
• Provides coverage for the back of the neck and ears; versatile for different activities and use with other head gear
PRO TIP:
SAFETY IN HOT CONDITIONS
Dozens of workers die and thousands more become ill while working in extreme heat or humid conditions every year. That’s why it’s important your workers have all-day access to cooling devices (including towels and bandanas), cold water, and air-conditioning to keep heat stress at bay. Get more PPE insight at JJKellerSAFEGEAR.com
SEASONAL
KNIT WINTER HAT
• Reflective stripe provides visibility at night or low light
• 100% soft acrylic knit fabric
• Folding cuff provides ear protection
• Drawstring cord
• Stretchable material fits most sizes
• Machine washable
NEW REFLECTIVE KNIT WINTER HAT
• Reflective yarn sewn throughout, reacts with retroreflective properties to light
• Acrylic knit fabric
• Stretchable material fits most sizes
• Machine washable
KNIT BALACLAVA
• Polyester knit fabric
• Stretchable material fits most sizes
• Fits under hard hat or helmet*
*
KNIT WINTER HAT
KNIT BALACLAVA
NEW BEANIE WITH RECHARGEABLE LIGHT
• Reflective yarn on cuff
• Acrylic knit fabric
• Stretchable material fits most sizes
• Built-in, hands-free LED flashlight with 3 lighting modes
• Standard USB port for battery charging; full charge lasts up to 4 hours (continuous use) or 6-8 hours (intermittent use)
KNIT WINTER HAT
FLEECE-LINED GAITER
WITH TOGGLE
• Polyester spandex fabric, lined with polar fleece
• Angled design prevents bulking on shoulders
• Toggle on back helps create a personalized fit to keep heat in and cold out
• Stretchable material fits most sizes
• Can be worn around neck or pulled over mouth, nose and ears
SEASONAL
10-STUD ICE TRACTION CLEATS
• One-piece ice traction device for shoes/boots delivers firm grip and stability
Sizing for 10-Stud Ice Traction Cleats MEN’SWOMEN’S
MediumSize 5-8Size 6.5-9.5
LargeSize 8-11Size 9.5-12.5
XLSize 11-13Size 12.5-14.5
XXLSize
HI-VIS ICE TRACTION CLEATS
• 10 durable steel studs on heel and forefoot (6 replacement studs)
• Stretchable rubber fit for easy on/off; fold for carrying
STUDDED ICE CLEATS
MCT-64408
LCT-64409
XLCT-64410
2XLCT-64411
• One-piece Thermo Plastic Elastomer (TPE) ice traction device for shoes/boots delivers firm grip and stability
• Multi-directional steel cleats on heel and forefoot for better traction
• Stretchable rubber fit for easy on/off; fold for carrying
ALSO AVAILABLE
J. J. Keller Advantage members get FREE SHIPPING! Take advantage at JJKeller.com/SAVE
Juno Jones Women’s Meti II With Steel Toe Boots Visit JJKeller.com
Juno Jones Women’s Solstice Composite Toe Sneakers Visit JJKeller.com
SCT-61375
M CT-65672
LCT-64474
XL CT-64510
Sizing for Hi-Vis Ice Traction Cleats
SmallSize 3-7
MediumSize 6-10
LargeSize 9-13
XLSize 12-16
PPE ACCESSORIES
Little changes can make a big impact on safety. Give your workers solutions to keep them visible and safe, as well as organized.
PRO TIP:
PPE is the last line of defense between workers and the hazards they face on the
An effective PPE program keeps the employer in compliance with OSHA regulations and ensures that workers know how to effectively protect themselves. Adding to an already existing arsenal, workers can use PPE accessories to further increase visibility and enhance safety.
PPE ACCESSORIES
PPE ACCESSORIES
NEW BACKPACK
• Silver reflective safety tape
• Made of 100% polyester 600D Oxford with PVC coating
• Adjustable padded straps; padded back for comfort
• 1 front mesh pocket; 2 side pockets with mesh vents
• 19" L x 121⁄2" W x 8" H)
• Measures 191⁄2" x 161⁄2" overall
SLING BAG
Mesh zippered front pocket folds out to hold full-brim hard hat or similar
NEW SAFETY SUSPENDERS
• 2" silver reflective tape offers 360 degree visibility
• 100% elastic nylon material with quick-release buckle closure
• Adjustable elastic waistband and shoulders straps
SAFETY SUSPENDERS
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE
PRO TIP: SEAT BELT COVERS
PPE ACCESSORIES
How confident are you that your powered industrial truck operators always use the seat belt? Not using a seat belt is more than an OSHA violation — it’s a practice that puts the operator at risk for injuries. Having a high-visibility cover on the belt helps drivers remember to wear it, and helps companies easily see the belt in action to enforce safety rules.
SLING BAG
Get more PPE insight at JJKellerSAFEGEAR.com
• Reflective safety stripes
• Made of 210 denier polyester
• Black adjustable drawstring closure
• Reinforced triangle corners with metal grommets; handle on back for carrying/hanging
• Large zippered pocket (103 4" W x 61⁄2" H)
• Measures 191⁄2" x 161⁄2" overall
SLING BAG
“This product will help me stay safe. I’m using this product for emergency situations that might occur while traveling. I like the color and style.”
KATHY
| MISSOULA, MT
SEAT BELT COVER
• ANSI-compliant polyester
• 2" Level 2 ANSI compliant reflective bands
• Hook & loop closure
• Fits standard width seat belt harness
SEAT BELT COVER
PROTECTIVE WORKWEAR
Safety goes beyond gloves, vests and hard hats. Prevent worker injuries by providing safety equipment for task-related conditions.
75 KNEE PADS 75 ARM SLEEVE 75 BACK SUPPORT BRACE
PPE is the last line of defense from hazards when engineering controls, work practices, and administrative controls aren’t adequate to keep you safe. Providing the proper protective gear can make all the difference to job performance and safety. Assess each task and choose the best equipment to fit your industry, climate, and hazard level. Get more PPE insight at JJKellerSAFEGEAR.com
PRO TIP: KNEE PADS
PROFESSIONAL KNEE PADS
• High-density foam and thick gel cushion
• 600D polyester with breathable mesh fabric and reinforced stitching
• 2 neoprene adjustable extension straps
• Heavy-duty PP and TPR hard shell; flat cap design prevents rolling
• One size fits most
Employees’ knees are important parts of their bodies that help them move, walk, run, lift, jump and more. Without them, employees wouldn’t be as mobile as they need to be to perform job tasks. However, some job tasks may require static and prolonged positions, like kneeling, which can be dangerous to their knees. That’s why knee pads are important for work that requires employees to kneel or crawl. Knee pads reduce stress on the knees, protect crucial tendons, ligaments, and bones, and keep employees safe.
Get more PPE insight at JJKellerSAFEGEAR.com
BACK SUPPORT BRACE
• Reflective tape for work in low light
• Hook & loop closure; adjustable suspenders
• PVC rods and elastic tension bands for extra support
NOTE: The use of this belt will not prevent injury and should not be used to overcome physical disabilities. This belt should be used only after receiving training in proper lifting techniques.
SCT-65104
MCT-65105
LCT-65106
XLCT-65107
2XLCT-65108
3XLCT-65109
CUT-RESISTANT PROTECTIVE ARM SLEEVE
• Moisture-wicking fabric keeps sweat off skin
• Can be worn on either arm
FLAME RESISTANT (FR)
Protect your workers from arc flashes and flash fires with flame-resistant (FR), arc-rated (AR) apparel.
PRO TIP:
FR clothing isn’t fireproof. It’s flame-resistant. It won’t melt or stick to workers’ skin like non-FR clothing. Under the right heat and conditions, FR clothing will eventually burn. Get more PPE insight at JJKellerSAFEGEAR.com
FL AME FLAME RESISTANT (FR)
FLAME RESISTANT (FR)
NEW CAT 2 FR COVERALL
• CAT 2 Arc Rating 8 cal/cm2
• NFPA 70E/NFPA 2112; CSA Z462; ASTM F1506 compliant
• 5.5 oz. TECGEN SELECT® OPF Blend Twill
• Lightweight, breathable fabric has superior moisture wicking and drying
• Elastic waist; snap-front closure; two-way zipper; 7 pockets with side pass through
• FR protection will not wash/wear out
Coveralls are designed to cover the entire body, extending from the neck to the ankles. FR (Flame-Resistant) coveralls have been specifically crafted to safeguard workers against two significant risks: flash fires and electric arc flashes. They resist ignition and can selfextinguish, minimizing the chance of catching fire or melting. Such properties help allow the wearer to escape potentially hazardous situations, ultimately contributing to a reduction in injuries.
Get more PPE insight at JJKellerSAFEGEAR.com
FLAME RESISTANT (FR)
NEW CAT 1 FR CONTROL 2.0 T-SHIRTS
• CAT 1 Arc Rating 4 cal/cm2
• NFPA 70E; CSA Z462; ASTM F1506 compliant
• Use as a base layer
• Help regulate skin temperature (+/- 3 degrees)
ALSO AVAILABLE
Check out our NEW Arc Flash and Electrical Safety Best Practices (NFPA 70E 2024 Edition) online course Visit JJKeller.com and search CT-73885.
• Reduce perspiration by as much as 34%
• Made in the U.S.A.
2.0
SCT-71312
MCT-71313
LCT-71314
XLCT-71315
CONTROL 2.0
SHORT-SLEEVE T-SHIRT
SCT-71320 MCT-71331
LCT-71332
XLCT-71333
Sizing for Navy CAT 1 FR Control 2.0 T-Shirt SMLXL2XL3XL4XL Chest25"-29"29"-33"33"-37"37"-41"41"-45"45"-49"49"-53"
NEW CAT 2 FR WORK SHIRT
• CAT 2 Arc Rating 9.1 cal/cm2
• NFPA 70E/NFPA 2112; CSA Z462; ASTM F1506 compliant
• Lightweight, breathable fabric
• Patented vent design moves hot air out; covered back mesh panel wicks away sweat and increases mobility and flexibility
• 2 front chest pockets with flap button closure
WORK SHIRT
SCT-71405 MCT-71406
LCT-71407 XLCT-71408
ADD IMPRINT Call 833-806-6999 for imprint locations and pricing.
Protect workers from insufficient oxygen environments, harmful
FULL FACEPIECE 6000 SERIES, REUSABLE
• NIOSH approved for negative pressure air purifying and positive pressure dual airline applications
• Lightweight design with silicone faceseal for enhanced comfort and durability
• Large, scratch-resistant polycarbonate lens offers wide field of view and excellent visibility
• No extra parts required to attach filters, cartridges or a dual airline
• 3M™ Cool Flow™ valve helps provide cool, dry comfort
• Can be washed and reused many times
DISPOSABLE PARTICULATE RESPIRATOR 8210V, N95 WITH 3M COOL FLOW™ EXHALATION VALVE
• Meets NIOSH 42 CFR 84 N95 requirements
• Designed for settings involving heat, humidity, or long periods of wear
• Proprietary 3M™ Cool Flow™ Exhalation Valve is designed for easy exhalation and reduces heat build-up inside respirator to help keep wearer more comfortable
• Features adjustable noseclip and 2-strap design with dual point attachment
RESOURCES
Give workers resources that encourage PPE use and promote safe work practices.
PRO TIP:
OSHA requires every employer to assess their workplace to determine if hazards are present that would require workers to use PPE. J. J. Keller’s PPE solutions include handbooks, training courses, instruction charts, and ondemand support from subject-matter experts. Rounding out your PPE assessment with these unique resources ensures your evaluation is all-inclusive while helping you to select proper controls to protect workers.
Get more PPE insight at JJKellerSAFEGEAR.com
RESOURCES
NEW HEAT ILLNESS AND INJURY PREVENTION
This training is designed to help learners understand the dangers of heat stress in both indoor and outdoor environments and how to prevent and respond to a heat stress emergency.
After completing this training, learners will be able to:
• Identify hot working environments
• Recognize common signs and symptoms related to heat illness
• Respond to heat-related emergencies
• Apply heat stress prevention measures
• Describe communication expectations on multiemployer sites
Formats:
ELECTRICAL SAFETY AUDIT
This comprehensive, hands-on audit, conducted by one of the industry’s few NFPA-Certified Electrical Safety Compliance Professionals, covers all aspects of your company’s compliance with the Part 1910 Electrical Standard regulations.
• Electrical safety program principles and procedures
• Training for each qualified person
• Annual task audits performed on qualified persons
• Incident reports involving electrical hazards
• Procedures for interacting with contract employees
• And much more
You’ll also receive a report summarizing the findings and corrective recommendations.
PPE SIGNS
As the trusted safety and compliance experts, we offer a vast selection of stock and custom signs to help you:
• Reinforce proper PPE use
• Identify potential hazards
• Satisfy OSHA and ANSI requirements
• Convey company-specific messages with custom PPE signs
RESOURCES
EMPLOYEE’S PPE GUIDE: USING YOUR PERSONAL PROTECTIVE EQUIPMENT
This handbook focuses on the importance of using PPE. It offers guidance on donning and doffing basics as well as general industry vs. construction industry standards. The book provides a variety of supplemental strategies to convey critical information: overview, types of products available, safety tips/real-life stories, checklists and hazard assessments. The following chapters are covered:
• Head Protection
• Eye/Face Protection
• Hearing Protection
• Respiratory Protection
English, 40 pages.
• Hand/Arm Protection
• Body Protection
• High-Visibility PPE
• Foot/Leg Protection
5¼" W x 8¼" L, Softbound
PERSONAL PROTECTIVE EQUIPMENT INSTRUCTIONAL CHART
• Pandemic-Related PPE
• Seasonal PPE
• Temporary Workers
• Construction Workers
Outlines personal protective equipment information to help comply with OSHA’s PPE Standard (29 CFR 1910.132-.138).
INSTRUCTIONAL CHART
PERSONAL PROTECTIVE EQUIPMENT: EMPLOYEE ESSENTIALS
• Helps satisfy 29 CFR 1910.132(f) requirements
• Explains how to recognize the hazards each piece of PPE is designed to protect against, so employees have the knowledge they need to always wear the right PPE
• Discusses the importance of proper donning, doffing, adjusting, wearing and caring of PPE. Not only does this training help protect employees when on the job, it also helps employers meet OSHA’s PPE training requirements
• Covers head, eye and face; hearing; respiratory; hand and foot protection