CONSTRUCTION PORTFOLIO
Joana Proi Selected works 2019-2022
JOANA PROI DRAUGHTSWOMAN & CONSTRUCTION ENGINEER
PROFESSIONAL SELECTED WORKS 2019-2022
Overview plan & Street work plan 1:100 (Autodesk Revit)
Fastned - Charging station for electric cars 6.4 Boppard-Buchholz Kanal 09/2021 GPS Measurements + Execution drawings planner The Fastned charging station in Boppard is located near the highway A61, that connects the border to the Netherlands in the northwest to the interchange with A6. The main focus for this plot was the ramp at the entrance. According to the regional regulation regarding the external ramps, it had to be no more than 10%. As a result the rest of the station slopes were planned accordingly to this ramp.
Sequences of construction works
Construction details - 1:25 (Autodesk Revit)
Drainage system plan - 1:100
Fastned - Charging station for electric cars 4.2 Schweinfurt-West (Euerbach) 06/2021 Execution drawings planner The Fastned charging station in Schweinfurt is located along the highway A7, an essential North-South road connection for Germany. The challenge for this plot was to cover a difference in height of 0,70m, to connect the station with the already existing pedestrian path on the exit side. The drainage system was planned with an higher central line so that allow the rain water to flow on the lateral side of the station and to keep it away from the electric chargers.
Sequences of construction works
Overview plan & Street work plan 1:100 (Autodesk Revit)
Fastned - Charging station for electric cars 6.2 Kulmbach/Neudrossenfeld 02/2022 GPS Measurements + Execution drawings planner The Fastned charging station in Kulmbach/Neudrossenfeld is located near the highway A70, that connects the A7 to the A9. Due to the border lines of the rental area, was not possible to have a perfectly curved ramp with a concentric circles at the entrance. The solution proposed, for the car drivers safety, was to add the road surface markings on the floor and build the smaller radius as a result of combination of 2 different radius.
Construction details - 1:25 (Autodesk Revit)
THANK YOU