NEXT LEVEL NESTING

Biesse High Dynamics (cont)

the first sheet, the cell production is continuous. The sheet is aligned with the machine table, saving fifteen seconds per sheet and adds up to twenty minutes a shift! When the sheet is moved onto the machine table it is dropped in its final position: more time saved not having to push it into place! And as the finished parts are moved onto the outfeed, the next sheet is loaded at the same time. It’s a symphony of motion that never stops.

But it’s the cutting where the most savings are made. Past machines have made claims of high speeds but rarely deliver because of the time the tool takes to reach the claimed feed speed. Biesse HD’s improved rack and pinion and more powerful drive motors accelerate to reach the claimed top speed in around 100mm of travel and decelerate in the same distance! But lineal speed is not the only gain through Biesse High Dynamics. An F1 race car cannot compete without blistering cornering speeds and so, Biesse HD will produce sharp, square corners on your nested panels four times faster than the standard Rover B!

On a typical 600mm by 600mm panel the tool achieves 50 metres/ minute for 70% of the time.In a test for an Australian kitchen manufacturer, cutting typical cabinet components from a 3.6 X 1.8 sheet took less than three minutes to process. An unseen benefit is the tool operating with its optimal chip load and lasting longer, especially with superior Australian manufactured board. Biesse HD offers the reality of using one machine instead of two or three, or the possibility of eliminating overtime or weekend work. It is a revelation like no other.

Biesse HD is not just a machine, it’s a philosophy, a new way of thinking that directly benefits the customer. It’s fast, dynamic, unique, unlike anything you have seen before. Equipped with the optional twin configuration of two routing spindles and two drilling units, even greater savings can be achieved. The cell can of course be linked to a storage solution with off loading and sorting of finished components by robot.

Frank Williams CBE, of Williams F1 motorsport fame asks of innovation, “Does it make the car go faster?” In the case of CNC nesting with Biesse High Dynamics, the answer is YES!