H-SERIES SPECIFICATIONS CUSTOMER FEEDBACK:
MODEL NUMBER
The Cleco H-Series Shut-Off Pulse Tool was placed in service 12 months ago, and remains in service today without any maintenance. The tool is used on an application that is a very challenging joint because it consists of an aluminium cover with RTV as a gasket. The tool has approximately 102,000 run-downs without failure! This H-Series Tool definitely out-performs the other pulse tools that I have in production in both repeatability and accuracy.
DRIVE TYPE
TORQUE RANGE
FREE SPEED
SIDE TO CENTER
WEIGHT
AIR CONSUMPTION
Nm
RPM
lbs.
kg
mm
NPT
4-7 4-7 6-11 6-11 6-11 10-20 10-20 20-35 20-35 30-55 50-80 50-80 75-110 75-120
3500 3500 3500 3500 3500 4000 4000 4000 4000 4000 3500 3500 3000 3000
1.74 1.74 1.81 1.87 1.83 1.92 1.90 2.31 2.31 2.54 3.20 3.10 3.75 3.75
0.79 0.79 0.82 0.85 0.83 0.87 0.86 1.05 1.05 1.15 1.45 1.40 1.70 1.70
21 21 21 21 21 21 21 24 24 24 28.5 28.5 28.5 28.5
1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
Ft. Lbs.
Hose I.D.
SCFM
Free Speed
Load
3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 1/2" 1/2"
7.06 7.06 7.06 7.06 7.06 8.7 8.7 15.9 15.9 15.9 19.4 19.4 19.4 19.4
5.3 5.3 5.3 5.3 5.3 5.3 5.3 7.1 7.1 10.6 10.6 10.6 14.1 14.1
8.8 8.8 10.6 10.6 10.6 12.4 12.4 15.9 15.9 21.2 23.0 23.0 30.0 30.0
CFM
CFM
H-SERIES PULSE TOOLS
H-SERIES | PISTOL GRIP | SHUT-OFF MODELS 7PTHH352 7PTHH35Q 11PTHH352 11PTHH35Q 11PTHH353* 20PTHH40Q 20PTHH403* 35PTHH40Q 35PTHH403* 55PTHH403* 80PTHH35Q 80PTHH354 110PTHH30Q 120PTHH304
Donald W. Jr. Manufacturing Engineer Transaxle Manufacturing of America
1/4” Sq.Dr. 1/4” QC 1/4” Sq.Dr. 1/4” QC 3/8” Sq.Dr. 1/4” QC 3/8” Sq.Dr. 1/4” QC 3/8” Sq.Dr. 3/8” Sq.Dr. 7/16” QC 1/2” Sq.Dr. 7/16” QC 1/2” Sq.Dr.
3.0-5.1 3.0-5.1 4.4-8.1 4.4-8.1 4.4-8.1 7.4-14.7 7.4-14.7 14.8-25.8 14.8-25.8 22.1-40.5 36.9-59.0 36.9-59.0 55.3-81.1 55.3-88.8
PTHHA = Add "A" after "HH" in model number to denote Top Air Inlet option when ordering. (*) 7/16” Quick Change Chuck available separately as an accessory.
MODEL NUMBER
DRIVE TYPE
TORQUE RANGE
FREE SPEED
Standard Equipment: Suspension bail and torque adjusting wrench. Torque signal port (pistol grip models only). SIDE TO CENTER
WEIGHT
AIR CONSUMPTION
Nm
RPM
lbs.
kg
mm
NPT
Hose I.D.
SCFM
Free Speed ft3/min
ft3/min
4-7 4-7 6-11 6-11 6-11 10-20 10-20 20-35 20-35 30-55 50-80 50-80 75-110 75-120
6000 6000 6500 6500 6500 7500 7500 6500 6500 6000 6000 6000 5500 5500
1.70 1.74 1.74 1.72 1.76 1.85 1.90 2.25 2.29 2.47 3.09 3.13 3.68 3.64
0.77 0.79 0.79 0.78 0.80 0.84 0.86 1.02 1.03 1.12 1.40 1.41 1.66 1.65
21 21 21 21 21 21 21 24 24 24 28.5 28.5 28.5 28.5
1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 1/2" 1/2"
8.7 8.7 10.5 10.5 10.5 17.3 17.3 19.4 15.9 22.9 26.5 26.5 30.0 30.0
10.6 10.6 12.4 12.4 12.4 15.9 15.9 19.4 19.4 26.5 24.7 24.7 33.5 33.5
8.8 8.8 10.6 10.6 10.6 12.4 12.4 15.9 15.9 21.2 23.0 23.0 30.0 30.0
Ft. Lbs.
Load
H-SERIES | PISTOL GRIP | NON-SHUT-OFF MODELS 7PHH602 7PHH60Q 11PHH653* 11PHH652 11PHH65Q 20PHH753* 20PHH75Q 35PHH653* 35PHH65Q 55PHH603* 80PHH604 80PHH60Q 110PHH55Q 120PHH554
1/4” Sq.Dr. 1/4” QC 3/8” Sq.Dr. 1/4” Sq.Dr. 1/4” QC 3/8” Sq.Dr. 1/4” QC 3/8” Sq.Dr. 1/4” QC 3/8” Sq.Dr. 1/2” Sq.Dr. 7/16” QC 7/16” QC 1/2” Sq.Dr.
2.9-5.2 2.9-5.2 4.4-8.1 4.4-8.1 4.4-8.1 7.4-14.7 7.4-14.7 14.7-25.8 14.7-25.8 22.1-40.5 36.9-59.0 36.9-59.0 55.3-81.1 55.3-88.5
PTHHA = Add "A" after "HH" in model number to denote Top Air Inlet option when ordering. (*) 7/16” Quick Change Chuck available separately as an accessory.
MODEL NUMBER
General: Tool performance rated @87 psi (6 bar) air pressure. Standard Equipment: Suspension bail and torque adjusting wrench.
DESCRIPTION
MODEL NUMBER
ACCESSORIES
931041 Rubber Tool Stand
WIND ENERGY
AEROSPACE
OFF-ROAD & CONSTRUCTION
HEAVY TRUCKS
DRIVE-LINE ASSEMBLY
936695PT Reserve Oil Filling Set
PULSE REPAIR MOTOR REPAIR
MAINTENANCE AND SERVICE KITS
931041 934918 935472 935965 935966 928483 935718 936695PT 539317 TVP-110-30-D (230V)*
H-Series 7PTH-120PTH (One Piece Rubber Tool Stand) Signal-Kit for torque verifier TVP110 7/16” Quick-Change Chuck for 11/20/35/55PTHH/PTHHA/PHH/PHHA Vibration absorber for 35/55PTHHA/PHHA Vibration absorber for 80/110/120PTHHA/PHHA Filler Unit Connector (Angle) Reserve Oil Filling Set (Syringe and Distancer) Hydraulic Oil (One Quart) Torque verifier; 2.72kg; W x H x D 222 x 232 x 105mm
* = Power cable, air signal-transducer, one 8m-cable for connection with air signal-transducer as well as one 2.3m-air hose for connection with transducer at the tool are included in delivery. NOTICE: Tool has to be equipped with a Signal-Kit for TVP-110.
MODEL NUMBER DESCRIPTION
MODEL NUMBER DESCRIPTION
110/120 PHH/PTHH 7/11/20 PHH/PTHH 35/55 PHH/PTHH 80 PHH/PTHH 7/11/20 PHH 35 PHH 55 PHH 80 PHH 110/120 PHH 7 PTHH 35 PTHH 80 PTHH 55 PTHH 110/120 PTHH 11 PTHH 20 PTHH
936035PT 936210 936211 936212 936158 936168 936169 936178 936179 936251PT 936252PT 936253PT 936281PT 936282PT 936283PT 936284PT
PROTECTIVE COVERS
GENERAL INDUSTRY
AGRICULTURE
AUTOMOTIVE
RAILROAD
928483 Filler Unit
937442PT 937443PT 937444PT 937445PT 937446PT
7/11/20PTHHA/7/11/20PHHA 35PTHHA/35PHHA 55PTHHA/55PHHA 80PTHHA/80PHHA 110/120PTHHA/110/120PHHA
937447PT 937448PT 937449PT 937450PT 937451PT
SP-1048-EN | 1213 | Specifications subject to change without notice. | © 2013 Apex Tool Group | www.apexpowertools.com
7/11/20PTHH/7/11/20PHH 35PTHH/35PHH 55PTHH/55PHH 80PTHH/80PHH 110/120PTHH/110/120PHH
Protective Cover
WE REFINE PULSE TOOLS.
NEW Reduced Tool Maintenance
Outstanding Ergonomics Leading motor design combined with new body development provides exceptional biotechnology. Less vibrations allow for greater operator comfort.
H-SERIES PULSE TOOLS DURABLE. ECONOMICAL. LOW MAINTENANCE.
Powerful and Efficient 3-Chamber Air Motor With speed governor and oilless blades. Reduces tightening time with increased torque. Unique design reduces blade wear and lowers total cost of ownership.
New patented double-chambered pulse unit with built-in automatic oil reserve. Up to 100,000 cycles before the first service.
3-Chamber Motor Housing
Completely Re-Engineered Pulse Unit Delivers market-leading repeatability for hard and soft joints.
Drive Spindle Bearing
50% Lower Air Consumption @ Free-Speed Innovative centrifugal advance does not release the entire capacity until full load. Enables operation to as low as 4 bar. Lower air consumption drives lower cost of ownership.
We are constantly improving our products to guarantee you optimum productivity. The Cleco H-Series combines legendary durability with unmatched repeatability so you will be able to complete every joint quickly and reliably.
Easy Torque Set-Up Simply insert hex into rear port of tool.
Due to the excellent power-weight ratio, you will not want to put it down again.
Automatically Activated Expansion Chamber
Anti-Wobble Socket
Ships Ready for Error-Proofing Works with existing TVP torque verifier. Port located near air inlet to maximize ergonomics.
High-Precision Shut-Off Mechanism ranges close to electric tool characteristics at a tolerance of +/- 10% at Six Sigma.
Standard Air Signal-Indicating Tool Shut-Off for Use With Cleco TVP Error-Proofing System
UNBEATABLE PERFORMANCE. With 54 models of shut-off and non-shut-off pulse tools to choose from, you are sure to find just the right Cleco Pulse Tool for the job.
Hard Joint Reference
Easily Adjustable Motor Speed Ensures accuracy on hard joints. Can be locked into place to prevent accidental modification.
Drive Spindle Bearing Support