EW LS ! N O DE I TO S IN
Great new tools for 2005. Same great value since 1939. Since our founding in 1939, Master Power has been producing quality air tools for a complete range of industrial applications. For 2005, that tradition of quality continues. Some examples of our new line are shown on the pages that follow. As always, performance, innovative design, ergonomics, special alloys for
critical parts, hand assembly, meticulous quality control – continues to contribute to the Master Power reputation for superbly crafted, durable air tools. A real value leader.
Customer Service – The Real Value With products of such superior quality, it’s no great challenge to make a sale. The real challenge is providing the courteous treatment, prompt delivery and a full inventory of parts that customers expect. This task is accomplished at Master Power by one of the largest service networks in
the industry where “service after the sale” is not just an afterthought.
More than just fast local delivery! ■ Your Master Power Distributor maintains a constantly replenished warehouse...a single, convenient source of supply that acts as your tool storehouse. ■ Your shipping costs are lower because the shipping point is nearby. ■ You deal with people who know your industry as well as their own. ■ Distributor salesmen are trained in the proper use and application of power tools. They’re qualified to help you select the right tool for the job.
■ You get quick service, catalog and price information, tools and parts, warranty administration, technical help and so much more. ■ You get a lot more than just quality power tools when you buy from your Master Power distributor.
Value. Performance. Delivery.
Finishing Tools & Drills MP4400 SERIES RANDOM ORBITAL SANDERS
MP6151 Heavy Duty High Speed Disc Sander 䡵 䡵 䡵 䡵 䡵
■ Improved air shield shaft balancer for longer bearing life. ■ Low profile for better sanding control and comfort. ■ Consumes less air than comparable tools– ideal for small shops with smaller compressors, yet can run economically in large industrial plants. ■ Light weight & low vibration due to use of high-strength polymer materials. All the qualities of metal without the weight! ■ 3/16” orbit pattern for fine finishing or 3/32” orbit pattern for superb finishing. ■ Levers allow users to visually see difference between 3/16” and 3/32” machines.
NEW!
Ideal for feather edging, light sanding and rust removal Designed to sand contours and hard to reach areas Variable speed regulator for on-the-job adjustment Ergonomic grip for operator comfort Lower dBA and lighter than competitive models
Model Number
MP6151
esign omic dt grip n o g r •E omfor with c eed ble sp • Varia lator regu
Free Speed
Disc Capacity
Spindle SIze
16,000
5”
7/16”-20
Length in. mm
6 5/16 160
Weight lbs. kg
2.1
.95
MP6151
Hose Size in. mm
3/8
Air Consumption Air Inlet (CFM) (NPT)
10
22
1/4”
GENERAL: Air Inlet 1/4” NPT. Use 1/4” (6.4 mm) I.D. hose. All tools performance rated @ 90psi (620 kPa) 3/16”
3/32”
MP1454-54 Drill ■ Ergonomic design with comfort grip ■ Small size ideal for tight access areas; handle is almost 90˚ to the spindle ■ Variable speed trigger ■ Handle exhaust NEW!
MP4400-03
MP1454-54
MP4400-05
MP4400-06
MP4403-05 (with 3/32” chrome lever)
ful power • More e ller siz • Sma esign omic dt grip n o g r •E omfor with c
3/16”
Model Number 3/32”
Back-up Pad / Sanding Pad Size
Random Orbital – 12,000 RPM – Non Vacuum MP4400-03 3.5 MP4400-05+ MP4403-05 5.0 MP4400-06 6.0
Free Speed rpm
Weight lb. kgs.
Height
Length
in.
mm
in.
mm
12,000 12,000 12,000
1.56 1.62 1.68
0.71 0.73 0.76
3.33 3.33 3.33
84.58 84.58 84.58
5.11 5.48 5.48
129.79 139.19 139.19
Random Orbital – 12,000 RPM – Central Vacuum with Skirt MP4400-15 5 12,000
1.73
0.78
3.33
84.58
7.75
196.75
NOTE: Most popular models shown – others available. GENERAL: Air Inlet 1/4” NPT. Min. Hose Size: 1/4”. Tool performance rated at 90 psi (620 kPa) air pressure. All threads are 5/16”-24 + NOTE: For hook & loop pad, add “HL” to the end of the model number.
Length
Model Number
Max. Free RPM
Chuck Capacity
in.
mm
MP1454-54
2800
1/4” Multicraft
5.5
139.7
Weight lbs. kg
1.5
GENERAL: Use 1/4” (6.4 mm) I.D. hose. Tools performance rated @ 90psi (620 kPa) air pressure.
.68
Hose Size (I.D.) in. mm
3/8”
10
Air Consumption (CFM)
Air Inlet (NPT)
12
1/4”
Grinders
Fastening Tools
MP4424 & MP4430 Die Grinders
MP2465 Positive Clutch Screwdriver
䡵 Ideal for general purpose applications such as porting, light weld grinding, polishing, and breaking up sharp edges. 䡵 Ergonomic grip for operator comfort NEW! 䡵 Built-in power regulator 䡵 360˚ air inlet swivel 䡵 Rear exhaust directs air away from work 䡵 1/4” capacity collet
䡵 Torque Range: Up to 100 In. Lbs (11 Nm) 䡵 Reversible 䡵 1/4” Hex Quick Change 䡵 Balanced design offers easy handling and control to reduce operator fatigue 䡵 Side to center 13/16” (20.64 mm)
ned y desigfor l l a c i nom ing • Ergoposite hous comfort r com operato ulator better er reg w o p -in • Built ools erful t • Pow
MP2465
inum ip d alum comfort gr e g g u •R g with housin ign ed des c n a l a ower •B ding p n a t s t • Ou
NEW!
MP4424
NEW! Wood Screws Model Number (in oak)
MP2465
#14
Thread Cutting Screws
Machine Screws
1/2”
3/4”
Sheet Max Torque Rating Metal Free Hard Slam Soft Pull Screws RPM In. Lbs. Nm In. Lbs. Nm
1/4”
1800
100
11
45
5.1
Length in. mm
6.6
168
Weight lbs. kg
2.5
1.1
GENERAL: Air Inlet 1/4” NPT. Use 1/4” (6.4 mm) I.D. hose. All tools performance rated @ 90psi (620 kPa) air pressure.
MP2264, MP2265 & MP2266 Impacts
MP4430
NEW!
MP4458
䡵 High power to weight ratio 䡵 Speed of a screwdriver, power of an impact 䡵 Ideal for soft joint applications 䡵 4 built-in speed control regulator positions (MP2264, MP2266) 䡵 Smooth and efficient impact mechanism creates no torque reaction 䡵 Compact clutch design 䡵 100% ball bearing design 䡵 Reversible 䡵 Detachable belt clip (MP2264, MP2265)
MP2264
MP4458 Die Grinder 䡵 Rugged all steel housing is ideal for rapid metal removal 䡵 Trim ergonomic design enables excellent control 䡵 Front exhaust 䡵 1/4” capacity collet
MP2265 MP2266
using teel ho s l l a ed p ower • Rugg comfort gri ig in p h b t wit u b ze ll in si • Sma
Model Number
MP4424 MP4430 MP4458
Hp
Max Free RPM
Mounted Wheels
Carbide Bur
.3 .3 .5
20,000 23,000 25,000
1” 1” 1 1/2”
1/2” 1/2” 1”
Length in. mm
6 3/8 160 6 153 6 1/16 154
Weight lbs. kg
1.25 .875 1.3
GENERAL: Air Inlet 1/4" NPT. Use 1/4" (6.4 mm) I.D. hose. All tools performance rated @ 90psi (620 kPa) air pressure.
.55 .41 .60
Hose (I.D.) in. mm
3/8 3/8 3/8
10 10 10
Air Consumption Air Inlet (CFM) (NPT)
18 17 20
1/4” 1/4” 1/4”
Model Number
MP2264 MP2265 MP2266
Bolt Capacity in. mm
1/2” 1/2” 1/2”
10 10 10
Max Free RPM
Blows Per Minute
10,000 10,000 9,500
1700 1400 1700
Torque Range Ft. Lbs. Nm
lbs.
10-65 10-55 10-65
2.2 2.2 2.2
13.5-102 13.5-75 14.0-88
GENERAL: Air Inlet 1/4” NPT. Use 1/4” (6.4 mm) I.D. hose. All tools performance rated @ 90psi (620 kPa) air pressure. *Pin retainer
Weight kg
1 1 1
Drive In.
1/4 QC 3/8 SQ* 1/4 QC
Fastening Tools NEW!
MP2271 Impact Wrench 䡵 Reversible sing 䡵 Full power forward and reverse m hou u n i m d alu ottle 䡵 Unique butterfly throttle Rugge fly thr
e • butter revers e & u q d i r n a •U forw power • Full
MP2271
MP2276 Impact Wrench 䡵 Lightweight yet durable composite housing 䡵 Ergonomic grip for improved operator comfort 䡵 Built-in power regulator with four settings 䡵 Reversible
NEW! MP2276
t weigh sing • Lightposite hou m co grip or nomic o g r egulat r E r • e w -in po • Built settings with 4
MP2294
MP2295
MP2294 & MP2295 Impact Wrenches 䡵 Twin hammer anvil for reduced vibration 䡵 High power to weight ratio 䡵 Built-in power regulator with four settings 䡵 100% ball bearing motor design 䡵 Full power forward and reverse 䡵 Smooth and efficient impact mechanism 䡵 Compact clutch design 䡵 Reversible Model Number
MP2271 MP2276 MP2294 MP2295
Bolt Capacity in. mm
3/8” 1/2” 3/4” 3/4”
9.5 12 20 20
Max Free RPM
Blows Per Minute
11,400 7,500 6,500 6,500
900 1200 1400 1400
Torque Range Ft. Lbs. Nm
5-70 40-200 37-370 37-370
7-100 50-270 50-502 50-502
Weight lbs.
kg
Square Drive In.
2.2 3.1 5.3 5.3
1.0 1.4 2.4 2.4
3/8 SQ 3/8 SQ 1/2 (ring ret.) 1/2 (pin ret.)
GENERAL: Air Inlet 1/4” NPT. Use 1/4” (6.4 mm) I.D. hose. All tools performance rated @ 90psi (620 kPa)
AIRETOOL® • APEX® BUCKEYE® • CLECO® COOPER AUTOMATION™ DGD® • DOLER® • DOTCO® GARDNER-DENVER® GARDOTRANS™ • GETA™ MASTER POWER® METRONIX™ QUACKENBUSH™ RECOULES™ ROTOR™ UTICA®
P.O. Box 1410 Lexington, SC 29071-1410 USA Phone: 803-951-7510 Fax: 803-996-2400 www.masterpowertools.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. GARDNER-DENVER IS A REGISTERED TRADEMARK OF GARDNER-DENVER MACHINERY, INC., USED UNDER LICENSE. © 2004 COOPER INDUSTRIES, INC.
DECEMBER 2004 SP-917EN 1204 7.5M