Product Information RENOLIN ETERNA 32 HT Turbine Oil according to DIN 51515-2 for increased thermal requirements Description
Advantages / Benefits
RENOLIN ETERNA 32 HT turbine oil is developed for gas, steam, and expansion turbines as well as for turbocompressors with and without gearboxes based on the latest lubrication technology. RENOLIN ETERNA 32 HT is based on a premium base oil with a very high natural Viscosity Index (VI >130). The excellent properties of the base oil are enhanced using a carefully selected additive system. RENOLIN ETERNA 32 HT contains no metallorganic compounds and is therefore ashless. It provides a zincfree antiwear protection.
• Excellent thermal and oxidation stability
Application
• Excellent corrosion protection
• Good viscosity-temperature behavior • Rapid air release • Good water separation behavior • No foaming • Low pourpoint • Good antiwear protection
RENOLIN ETERNA 32 HT is specially designed for use • Very high natural Viscosity Index (VI) in thermally stressed gas turbines and for use in machines with a common control and lubricating oil circuit. It can also be used as a bearing and sealing oil in hydrogen-cooled generators.
Specification RENOLIN ETERNA 32 HT meets and in many cases exceeds the requirements of:
• • • •
DIN 51515-2 General Electric (GE) GEK 28143 Alstom HTGD 90 117 Siemens AG Power Generation TLV 901304
The above information is supplied to the best of our knowledge and belief on the basis of the current state-of -the-art and our own development work. Subject to amendment.
PI 4-1206, Page 1 ; PM 4 / 06.03
FUCHS EUROPE SCHMIERSTOFFE GMBH Friesenheimer Str. 15 D – 68169 Mannheim
Tel. ++49-621-3701 0 Fax. ++49-621-3701 570 E-Mail zentrale@fuchs-europe.de
Product Information RENOLIN ETERNA 32 HT Turbine Oil according to DIN 51515-2 for increased thermal requirements Typical Technical Data:
Product name
32
Property
Unit
ISO VG
Test method 32
DIN 51 519
Kinematic Viscosity at 40 °C at 100 °C
mm²/s mm²/s
32 6
DIN 51 562-1
Density at 15°C
kg/m³
839
DIN 51 757
Flashpoint
°C
230
DIN ISO 2592
Pourpoint
°C
-21
DIN ISO 3016
Foaming Sequ. I Sequ. II Sequ. III
ml ml ml
5/0 5/0 5/0
FZG mechanical gear test rig FZG A/8,3/90
Failure load stage
9
DIN 51 354-2
Air release at 50°C
min
3
DIN 51 381
WAV-Test
s
20
DIN 51 589
Steel corrosion (corrosion protection)
Degree of corr.
0 0
DIN 51 585-A DIN 51 585-B
ASTM D 892
PI 4-1206, Page 2 ; PM 4 / 06.03
The above information is supplied to the best of our knowledge and belief on the basis of the current state-of -the-art and our own development work. Subject to amendment.
FUCHS EUROPE SCHMIERSTOFFE GMBH Friesenheimer Str. 15 D – 68169 Mannheim
Tel. ++49-621-3701 0 Fax. ++49-621-3701 570 E-Mail zentrale@fuchs-europe.de