Electronic Locksmith Tools: How to Set and Get the Right Prices What are the benefits of electronic tools for locksmiths? A locksmith, just like any professional, goes through steps to learn the trade. Locksmithing has come a long way since the time of blacksmiths, the pioneer inventors of locks. Nowadays, locksmiths offer a variety of services that includes cutting keys, installing locks on businesses and homes, replacing worn out locks and helping individuals who have locked themselves out of their cars or homes. Back then, locksmith tools were purely manual. But now, many tools have become electronic. Here are some of the electronic locksmiths tools that may help your business grow to its full potential: Electronic Key Impressioner Electronic key impressioners are portable devices that consist of alignment meters, control keys and scanning tips. The scanning tip of this tool is capable of scanning the position of the tumblers within a lock. To use the electronic key impressioner, the scanning tip is inserted into the lock and the control key is pressed, which will then determine the proper size and order for that particular lock. The device may then be hooked to a computer. A keycode can be supplied for use in creating physical keys using special software. Electronic Key Cutting Machine Electronic key cutting machines consist of a cutter wheel and key positioning instruments with which a blank key may be cut or molded from a master key. This task is usually accomplished by manual key cutting machines through mechanically tracing the master key to duplicate it. However, electronic key cutters utilize electronic sensors to trace the master key. Electronic key cutting machines were first introduced in the 1980’s. Electric Drill
Electric drills are the most frequently used tools by every locksmith. Locksmith Upminster, for example, not only use them to drill holes on doors to install locks, but also use them to drill into exit devices, locks and safes. A commercial-‐quality drill is well worth its price, as it will give years of service. According to Gordon Stubbs, a renowned locksmith, the favorite drill size amongst locksmiths is a ½ inch drill. When you’re planning to acquire a drill for your locksmith business, there are essential features to keep in mind. Stubbs suggests buying a drill that has two or three-‐stage reduction gear sets, is at least 600 RPM, has an adjustable control switch, is double insulated with at least 5 amps of power and has anti-‐friction bearings. Electric Pick Gun Electric pick guns are basically used for opening pin tumbler locks, which are cylinders that engage small pins of assorted lengths that prevent the lock from being turned and opened unless the correctly formatted key is inserted. Handling the principles of physics, a vibrating pin is used to bounce the pin tumblers so that there are spaces at the shear line, thus allowing the cylinder to be turned and opened. Though the electric pick gun is not foolproof, this tool will always come in handy for a locksmith. Locksmith Stratford, in particular, use electric lock picks when they fail manually picking a lock.