5 minute read
Parts Store
Liqui Moly Special Tec AA Motor Oils
Liqui Moly’s new Special Tec AA Series Motor Oil comes with the general specifications of API SN Plus + RC for gasoline engines and API CK-4 for diesel engines, which ensures an even higher cleaning effect inside the engine and a lower risk of engine damage due to LSPI (low-speed pre-ignition). The oil is ideal for modern Japanese and American gasoline engines, and for long oil change intervals and high motor requirements. The oil, which is made in Germany, comes in 10W-30, 5W-40, 5W-30, 5W-20 and 0W-20.
Advertisement
AIRAID Cold Air Dam Air Intake for Chevrolet Corvette
AIRAID’s Cold Air Dam Air Intakes are now available for the 2008-2013 Chevrolet Corvette with the 6.2L V8 engine option, and are made to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake sys tem retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that work together to provide free-flowing cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present.
For more information please go to www.airaid.com
Eibach PRO-SYSTEM Suspension Kit
Eibach’s PRO-SYSTEM kits are a precisely balanced combination of dampers, sport springs and bump-stops that are designed and tuned to operate as an integrated system. The PRO-SYSTEM improves turn-in response, increases cornering speed, reduces body roll and provides an ideally low stance. The kit also provides a lower centre of gravity which further improves performance. The kit is available for a wide variety of performance-oriented cars; check out the website for complete application listings.
For more information please go to www.eibach.com
COMP Cams Max-Lift BSR Shaft Rocker System for GM Gen V LT engines improves valve train dynamics, increases valve train stiffness and reduces deflection. They use a tri-
layer bushing instead of needle bearings to reduce deflection which then allows for increased rigidity and decreased rocker pad wear. This new rocker system makes the same camshaft perform like a slightly larger camshaft as more of the lobe lift is transferred directly to the valve train instead of being absorbed by deflection in the cylinder head and single-bolt rocker mounting design.
Pre-Engineered Building Kits
No Welding • Maintenance Free
Residential • Commercial
55-13325 115th Avenue, Surrey 604.589.4280 | Toll Free: 888.589.4280 www.easybuildstructures.ca
Easy Build Structures pre-engineered 2” x 3” galvanized steel framing system uses a unique “slip-fi t” design that simplifi es the installation process with the added strength and durability to withstand our Canadian winters. Whether you are looking for roof-coverage only to protect your investment or fully-enclosed garage and warehouse packages,
Easy Build Structures has the building for you.
Our sales team will work with you to customize your structure package to meet all your requirements. Easy Build packages come complete with everything you need, ranging from overhead and man doors, windows, insulation options, sheeting and fl ashing colours, and hardware.
Our structure widths range from 10’ through 50’, with the length being as long as you need. Our engineer can provide you with stamped and sealed drawings, Schedule B and C-B, and site inspections to help assist you with any permitting processed required by your municipality. These services also include our CSA-A660 certifi cation for pre-engineered steel structures in Canada.
DO-IT-YOURSELF
Take advantage of our full installation services throughout British Columbia, including complimentary on-site consultations in the Lower Mainland to fully design your custom structure. Furthermore, all our building packages CALL NOW FOR A CUSTOM QUOTE: 604.589.4280 are designed as do-it-yourself kits with a step-by-step installation manual.
Great Canadian Oil Change--------------------------------------Advertiser Index 24 QA1 Coilover Suspension Kits 360 Fabrication ------------------------------------------------- 23 for GM’s GMT00 Trucks All-Parts Trailer Sales ------------------------------------------ 45 Barry-Hamel ----------------------------------------------------- 43 BC G Body ---------------------------------------------------------3 CAM Oils --------------------------------------------------------- 45 Canadian Hot Rods --------------------------------------------- 37 Classified Motorsports ----------------------------------------- 35 Easy Build ------------------------------------------------------- 42 Eibach ------------------------------------------------------------ 44 Golden Leaf Automotive --------------------------------------- 27 Good Vibrations ------------------------------------------------- 30 Howard Cams --------------------------------------------------- 41 Ididit ----------------------------------------------------------------7 Jellybean AutoCrafters ----------------------------------------- 45 KMS Tools ------------------------------------------------------- 21 Kool Coat -------------------------------------------------------- 45 Liqui Moly ---------------------------------------------------------5 LMC Truck ------------------------------------------------------- 48 Lordco Auto Parts ---------------------------------------------- 13 Mopac Auto Supply --------------------------------------------- 47 Permatex --------------------------------------------------------- 31 Procar --------------------------------------------------------------2 Scott’s Super Trucks ------------------------------------------- 45 Westar Trailers -------------------------------------------------- 45 QA1 is now offering Coilover Suspension kits for the GM 1988-98 GMT400 trucks which are meant to greatly improve performance by providing a stiffer, lower suspension that is more suited to performance driving. The Front Coilover kits replace the stock control arms and shocks with tubular control arms and Pro Coil coilover shocks to improve stability and make room for larger wheel and tire packages. You can add up to seven degrees of caster and +2 to -3 degrees of camber and the kit itself is available in two levels. The rear coilover conversion kit drops the rear of your truck from 4- to 7-in. and utilizes the proven torque arm design.
For more information please go to www.qa1.net
MSD Blaster Ignition Coils for Ford Shelby GT50 and GT 500
MSD has once again expanded its performance ignition line with Blaster Ignition coils which are meant to be direct replacements for the 2016-2020 Ford Shelby GT350 and GT500’s 5.2L engine and will mount in the factory location and simply plug-in to factory connectors. The coil incorporates improved windings and material to increase the output of the coil, and it can be relied on to recover quicker through high rpm with a powerful spark to promote combustion.
For more information please go to www.holley.com
ENGINEERED TO WIN.
Using the exact same technology as our legendary race springs, the Eibach PRO-KIT, SPORTLINE and ANTI-ROLL-KIT are engineered to deliver maximum control at the limit, industry leading ride quality and aggressive looks. Call today to experience the Eibach Difference.
Consumer Inquiries 800-227-2242 Wholesale Inquiries 800-263-8621 eibachcanada.com
