Boatyard Catalog 2015 by JORDI GARCIA GAMON

PAINTING

Important Information Marine Exports is proud to present the 2015 Boatyard Catalog (BAD). Since Marine Exports stocks many different anti-fouling paints, we thought we would break the paints down into categories and explain what the differences are. For novices, this will take out someof the guess work; for the old hand, you may compare paints in a whole new way. Marine Exports would like to introduce you to our exclusive MARPRO paints. Found in all categories, MARPRO is sold only to thequalified independent boatyard or paint dealer. MARPRO will never be found on the shelves of West Marine®, Cabela®, Bass Pro® orany other box store. Marine Exports promise to you is you will never be embarrassed by the price or quality of MARPRO paint! In order to avoid some of the confusion about antifouling paints, Donovan Marine would like to offer the following:

Ablative Antifoulings:

Ablatives wear down like a bar of soap at a controlled rate. This results in always having fresh biocide at the surface of the paint, eliminating a build-up of coatings. Ablatives can be used on boats that are left in the water year round but because they do not lose the effectiveness when stored out of the water and can be hauled and relaunched. Ablatives are great for trailerable boats or boats that are hauled seasonally. These are shown by the code:

Hard Antifoulings:

Hard antifoulings (also known as modified epoxies) use epoxy resin technologies to provide a hard finish, some of these paints get multi-season results. Hard paints are used on fast boats and boats that generally stay in the water. These are shown by the code:

Boosted Antifoulings:

Better technology has made it possible to put additional biocides into both ablative and hard bottom paints. These boosted paints effectively reduce slime, particularly when a boat is still. These are shown by the code:

• Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out

• Works 24-7

H B DMI# 7-2609 7-2610 7-2611 7-2612 7-2613 7-2614 7-2615 405774 405778 405772 405630 405642 405654 405655 405666 405667 406252 406276 406290 406303 406327 406339 404169 733175 733180 733185 733190 732460 732462 732464 732466

MFG#

Y3669F Y3779F Y3559F Y449B Y559B Y669B Y669B Y779B Y779B YBA060 YBA062 YBA063 YBA063 YBA068 YBA068 YBA406 1277 1377 1677 1877 1082 1083 1086 1088

Type

H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H

B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B

PAINTING

Hard Paint

Color

Size

% Copper

Superkote Gold, Blue Superkote Gold, Blue Superkote Gold, Red Superkote Gold, Red Superkote Gold, Black Superkote Gold, Black Superkote Gold, Green Ultra with Biolux, Blue Ultra with Biolux, Black Ultra with Biolux, Green Fiberglass Bottomkote with Irgarol, Red Fiberglass Bottomkote with Irgarol, Green Fiberglass Bottomkote with Irgarol, Blue Fiberglass Bottomkote with Irgarol, Blue Fiberglass Bottomkote with Irgarol, Black Fiberglass Bottomkote with Irgarol, Black Trilux 33 with Biolux, Blue Trilux 33 with Biolux, Red Trilux 33 with Biolux, Black Trilux 33 with Biolux, Black Trilux 33 with Biolux, White Trilux 33 with Biolux, White VC 17M Extra with Biolux, Blue Trinidad SR, Blue Trinidad SR, Green Trinidad SR, Red Trinidad SR, Black Trinidad Pro, Blue Trinidad Pro, Green Trinidad Pro, Red Trinidad Pro, Black

Gallon Quart Gallon Quart Gallon Quart Gallon Gallon Gallon Gallon Gallon Gallon Gallon Quart Gallon Quart Gallon Gallon Gallon Quart Gallon Quart Quart Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon

67 67 67 67 67 67 67 66.5 66.5 66.65 42.75 42.75 42.75 42.75 42.75 42.75

70 70 70 70 70 70 70 70

PAINTING

Hard Paint

DMI# 7-1070 7-1071 7-1072 7-2617 7-2618 7-2619 7-2620 7-2621 7-2622 7-2623 7-2624 404107 404804 733154 733166 733015 733039 733091 733053 732429 732431 732443 732417 732455 733344 732380 732405 732366 380650 380651 380662 380674 380675

MFG#

V116 R3950 1875 1875 1275 1375 1675 1575 1072 1076 1078 1071 1079 1818 1046 1048 1042 1228 1228 1628 1810 1810

Type

H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H

Color

Size

% Copper

Superkote, Blue Superkote, Red Superkote, Black Superkote Hard 45, Green Superkote Hard 45, Green Superkote Hard 45, Blue Superkote Hard 45, Blue Superkote Hard 45, Red Superkote Hard 45, Red Superkote Hard 45, Black Superkote Hard 45, Black VC Offshore, Blue Baltoplate, Grey Metallic Trinidad, Black Trinidad, Black Trinidad, Blue Trinidad, Green Trinidad, Red Trinidad, Brown Trinidad 75, Dark Blue Trinidad 75, Red Trinidad 75, Charcoal Black Trinidad 75, Blue Trinidad 75, Special Black Unepoxy Plus, Black Copper Guard, Red Copper Guard, Black Copper Guard, Blue Unepoxy, Blue Unepoxy, Blue Unepoxy, Red Unepoxy, Black Unepoxy, Black

Gallon Gallon Gallon Gallon Quart Gallon Quart Gallon Quart Gallon Quart Quart Gallon Gallon Quart Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Quart Gallon Gallon Quart

65 65 65 45 45 45 45 45 45 45 45 41 41 65 65 65 65 75.8 75.8 75.8 75.8 75.8 65 75.8 60.9 53.3 49.5 45.7 43 43 43 43 43

DMI# 7-2627 7-2628 7-2629 7-2630 7-2631 7-2632 7-2633 7-2634 405561 405565 405569 406010 406014 406016 406018 406020 406024 406026 406036 406042 406048 406050 732510 732512 732514 732516 733611 733613 733623 733635 733647 733659 733661 733673

A B

MFG#

Type

Color

Size

% Copper

Y4490B Y6690B Y7790B Y5690 Y5691 Y5692 Y5693 Y5694 Y5695 Y5696 YBA470 YBA471 YBA472 YBA473 1032 1033 1036 1038 1161 1161 1261 1361 1461 1661 1861 1861

A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

Super-B Gold, Green Super-B Gold, Green Super-B Gold, Blue Super-B Gold, Blue Super-B Gold, Red Super-B Gold, Red Super-B Gold, Black Super-B Gold, Black F/G Bottomkote ACT with Irgarol, Red F/G Bottomkote ACT with Irgarol, Blue F/G Bottomkote ACT with Irgarol, Black Micron Extra, Blue Micron Extra, Green Micron Extra, Red Micron Extra, Black Micron Extra, Shark White Micron Extra, Brown Micron Extra, Dark Blue (SR) Micron 66, Blue Micron 66, Green Micron 66, Red Micron 66, Black Ultima Pro, Blue Ultima Pro, Green Ultima Pro, Red Ultima Pro, Black Vivid, White Vivid, White Vivid, Blue Vivid, Green Vivid, Yellow Vivid, Red Vivid, Black Vivid, Black

Gallon Quart Gallon Quart Gallon Quart Gallon Quart Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Quart Gallon Gallon Gallon Gallon Gallon Quart

67 67 67 67 67 67 67 67 41.97 41.97 41.97 37.2 37.2 37.2 37.2 37.2 37.2 37.2 40.4 40.4 40.4 40.4 60 60 60 60

B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B

PAINTING

Ablative Paint

PAINTING

Ablative Paint

A DMI#

7-2635 7-2636 7-2637 7-2638 7-2639 7-2640 7-2641 7-2642 405907 405921 405945 405969 405983 732467 732479 732481 732948 732950 732962 732986 733003 733013 7-2600 7-2601 7-2603 7-2604 7-2605 7-2606 7-2607 733712 733750 733762 508195 508210 508222 508234 508246

MFG#

Y5580 Y5581 Y5582 Y5583 Y5584 1240 1840 1640 1281 1281 1381 1681 1881 1881

1260 1860 1860 BP201 BP401 BP501 BP502 BP701

Type

Color

Size

% Copper

A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

Super-B Ablative 45, Blue Super-B Ablative 45, Blue Super-B Ablative 45, Red Super-B Ablative 45, Red Super-B Ablative 45, Black Super-B Ablative 45, Black Super-B Ablative 45, Green Super-B Ablative 45, Green Micron CSC, Blue Micron CSC, Green Micron CSC, Red Micron CSC, Black Micron CSC, Shark White Hydrocoat, Blue Hydrocoat, Black Hydrocoat, Red Premium SSA, Blue Premium SSA, Blue Premium SSA, Green Premium SSA, Red Premium SSA, Black Premium SSA, Black Aluma Pro Multi-Season, White Aluma Pro Multi-Season, White Aluma Pro Multi-Season, Blue Aluma Pro Multi-Season, Blue Aluma Pro Multi-Season, Black Aluma Pro Multi-Season, Black Aluma Pro Multi-Season, Black Alumacoat SR, Blue Alumacoat SR, Black Alumacoat SR, Black Awlstar Gold Label, Charcoal Black Awlstar Gold Label, Medium Green Awlstar Gold Label, Light Blue Awlstar Gold Label, Deep Blue Awlstar Gold Label, Red

Gallon Quart Gallon Quart Gallon Quart Gallon Quart Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Gallon Quart Gallon Gallon Gallon Quart Gallon Quart Gallon Quart Gallon Quart Spray Gallon Gallon Quart Gallon Gallon Gallon Gallon Gallon

45 45 45 45 45 45 45 45 37.2 37.2 37.2 37.2 37.2

40.36 40.36 42.42 44.15 40.36

Marpro Superkote Gold 67% Hard with SCX Slime Control Extra

H B

• Highest performance modified epoxy hard finish on the market today. • Performance booster SCX (Slime Control Xtra) provides outstanding protection against slime, grass and weed. • Continual release of biocide makes this hard modified epoxy most effective for anti-fouling protection, with only minimal paint buildup. • Tough, full season paint for superior protection against hard and soft growth in extreme fouling conditions.

Order No. 7-2609 Order No. 7-2610 Order No. 7-2611 Order No. 7-2612 Order No. 7-2613 Order No. 7-2614 Order No. 7-2615

Blue Blue Red Red Black Black Green

Gallon Quart Gallon Quart Gallon Quart Gallon

Marpro Superkote Hard 45 - 45% Hard

PAINTING

Marpro Antifoulants

• A high cuprous oxide content (45%) with a coating that provides a modified epoxy hard finish. • Provides full season protection for moderate fouling conditions. • Perfect for powerboats & sailboats in seasonal boating conditions. • Can be applied directly over properly prepared vinyls, epoxies and most any other hard or multi-season bottom paints.

Order No. 7-2617 Order No. 7-2618 Order No. 7-2619 Order No. 7-2620 Order No. 7-2621 Order No. 7-2622 Order No. 7-2623 Order No. 7-2624

Green Green Blue Blue Red Red Black Black

Gallon Quart Gallon Quart Gallon Quart Gallon Quart

Marpro Superkote Antifouling • • • •

Hard modified epoxy. Up to 65% Cuprous Oxide. Apply over most other antifoulings. Excellent for fiberglass, wood and steel.

Order No. 7-1070 Blue Order No. 7-1071 Red Order No. 7-1072 Black

Gallon Gallon Gallon

• Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out • Works 24-7

PAINTING

Marpro Antifoulants - Ablatives

Marpro Super-B Gold 67% Ablative with SCX Slime Control Extra

A B

Green Green Blue Blue Red Red Black Black

• Perfect for aluminum, fiberglass, wood and steel boats. • Excellent for trailer boats as well, Aluma Pro can be applied over most antifoulings. • This ablative paint means no paint build up and eliminates heavy sanding while offering good protection for tough fouling conditions.

White White Blue Blue Black Black

Order No. 7-2635 Order No. 7-2636 Order No. 7-2637 Order No. 7-2638 Order No. 7-2639 Order No. 7-2640 Order No. 7-2641 Order No. 7-2642

Blue Blue Red Red Black Black Green Green

Marpro Alumashell Antifouling Spray • For aluminum outdrives and outboards. • May be hauled and relaunched without recoating. • Enhanced formula protects against slime, algae & barnacles. • Ideal protection for fresh, brackish and salt waters. • Contains no copper compounds- will not cause galvanic corrosion. • 12 oz. canister.

Order No. 7-2607 Black Gallon Quart Gallon Quart Gallon Quart

Marpro Aluma Prep Cleaning and Conditioning for Aluminum • Deep cleans, brightens and conditions aluminum hulls. • Removes oxidation corrosion and chemically etches the aluminum surface for painting or welding.

Order No. 7-2678 Gallon Order No. 7-2679 Quart

Gallon Quart Gallon Quart Gallon Quart Gallon Quart

Marpro Aluma Pro Multi-Season Self Polishing Ablative

Order No. 7-2600 Order No. 7-2601 Order No. 7-2603 Order No. 7-2604 Order No. 7-2605 Order No. 7-2606

• A high cuprous oxide content (45%). • Perfect for powerboats & sailboats in seasonal boating conditions.

• The highest performance ablative copolymer performance products on the market today. • Performance booster SCX provides outstanding protection against slime, grass and weed. • Continual release of biocide makes this self polishing copolymer most effective for anti-fouling protection, with only minimal paint buildup.

Order No. 7-2627 Order No. 7-2628 Order No. 7-2629 Order No. 7-2630 Order No. 7-2631 Order No. 7-2632 Order No. 7-2633 Order No. 7-2634

Marpro Super-B Ablative 45

Marpro Professional Fishboat Coatings - Alkyd Topside Enamel

Marpro Topside Gold • Can be used on fiberglass, wood, aluminum and steel. • Hard, mirror high gloss one-part silicone copolymer finish with great UV protection. • Great for cleaning, tough abrasion and stain resistance. • Perfect for waterline striping.

Order No. 7-2662 White Order No. 7-2663 White

Gallon Quart

Marpro Camouflage Paint • Dull-finish marine paint is perfect for hunting or fishing vehicles. • High quality, temporary finish for use on duck boats, skiffs and canoes. • Can be easily removed with the included neutralizer.

Order No. 7-2660 Olive Order No. 7-2661 Brown

Quart Quart

Marpro White Undercoater • One coat of our high build undercoater is great for coverage of 300 square feet/gal, 75 square feet/quart. • Great coverage, quick dry, great adhesion for topcoat.

Order No. 7-2695 Gallon Order No. 7-2697 Quart

PAINTING

Marpro Topside Paints and Camouflage Paint

• A technically advanced, single component topside alkyd enamel giving you a hard protective coating for super high gloss, color retention and long durability. • Can be used on fiberglass, wood, aluminum and steel.

Order No. 7-2649 Order No. 7-2650 Order No. 7-2652 Order No. 7-2653 Order No. 7-2654 Order No. 7-2655 Order No. 7-2656 Order No. 7-2657 Order No. 7-2658 Order No. 7-2659

Gloss White Gloss White Medium Gray Medium Gray Gloss Black Gloss Black Green Green Blue Blue

Gallon Quart Gallon Quart Gallon Quart Gallon Quart Gallon Quart

Marpro Waterbase No Sand Primer • No need to sand before applying antifouling paint by on new or unpainted boats. • Used below the waterline for priming fiberglass.

Order No. 7-2686 Gallon

Marpro Barrier Shield

Marpro Mar-Protect Epoxy Primer • Provides a seamless epoxy coating that creates a high build water barrier that eliminates any direct path for water migration. • Bottom Protect 8000A/8000B High Build Epoxy Primer is a heavy duty 3:1 epoxy coating. • Prevents water absorption and blistering of fiberglass hull.

Order No. 7-2670 Gallon

• An anticorrosive primer for underwater metal surfaces. • Primer for antifouling paint over sanded fiberglass.

Order No. 7-2689 Gallon

Marpro Thinner/Solvent for Marine Coatings • Reducer improves the application and the flow of coatings for brushing and rolling. • A slow drying solvent, compatible with all anti-foulings, primers and enamels.

Order No. 7-2674 Gallon Order No. 7-2675 Quart

PAINTING

Interlux Antifoulants Ablatives - Copolymers

A B

Interlux Micron 66 • Not for use in Freshwater. • Top of the Micron range – Awardwinning, self-polishing copolymer technology with Biolux SPC. (Use in saltwater). • Outstanding antifouling performance in the harshest fouling conditions. • Outperforms old TBT antifouling paints. • Top rated antifouling in independent tests for maximum protection and long life. • Formulated specifically for professional application. • Maximum protection even during stationary periods at the dock or mooring.

• The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface. • True self polishing, multi-seasonal copolymer.

NEW SIZE

406036 406035 406042 406048 406049 406050

(YBA470) (YBA470) (YBA471) (YBA472) (YBA473) (YBA473)

Blue Blue Green Red Black Black

Gallon 3 Gallon Gallon Gallon 3 Gallon Gallon

405561 405562 405563 405564 405565 405566 405567 405569 405570 405571

(Y4490B) (Y4490B) (Y5590B) (Y5590B) (Y6690B) (Y6690B) (Y6690B) (Y7790B) (Y7790B) (Y7790B)

Red Red Green Green Blue Blue Blue Black Black Black

405907 405919 405921 405933 405945 405956 405969 405972 405983 405995

(Y5580)Blue (Y5580)Blue (Y5581) Green (Y5581) Green (Y5582)Red (Y5582)Red (Y5583)Black (Y5583)Black (Y5584)Shark White (Y5584)Shark White

Gallon Quart Gallon Quart Gallon Quart Gallon Quart Gallon Quart

Interlux Micron Extra with Biolux

Interlux Fiberglass Bottomkote ACT with Irgarol

A B

• Uses Ablative Copolymer Technology providing excellent season-to-season protection. • Ablative Copolymer Technology enables it to wear away with use and eliminates the build-up of sold spent coatings and the heavy sanding needed to remove them. • It contains cuprous oxide and Irgarol.

Interlux Micron CSC

NEW SIZE

Gallon Quart Gallon Quart Gallon Quart 3 Gallon Gallon Quart 3 Gallon

A B

• Combines the slime blocking power of Biolux with controlled solubility copolymer antifouling paint technology to provide long-lasting, full-spectrum defense against fouling organisms.

406010 406011 406014 406016 406018 406019 406020 406024 406026

(Y5690) (Y5690) (Y5691) (Y5692) (Y5693) (Y5693) (Y5694) (Y5695) (Y5696)

Blue Blue Green Red Black Black Shark White Brown Dark Blue

Gallon Quart Gallon Gallon Gallon Quart Gallon Gallon Gallon

Interlux Pacifica Plus • Outstanding Copper-free bottom paint. • Contains Econea to control shell growth and Biolux Slime-Blocking technology.

404335 (YBB260) Blue 404347 (YBB262) Red 404359 (YBB263) Black

Gallon Gallon Gallon

NEW

Interlux Ultra with Biolux

H B

• High solids, high performance, hard antifouling. • Biolux technology reduces slime and increases antifouling performance. • Durable finish. • Fast-drying formula.

405772 (3559) Green 405774 (3669) Blue 405778 (3779) Black

Gallon Gallon Gallon

Interlux VC Offshore

H B

Interlux Fiberglass Bottomkote Classic

PAINTING

Interlux Antifoulants Modified Epoxy

H B

• Proven all purpose antifouling protection. • Fast dry, paint and launch the same day. • Overcoats any existing bottom paint.

405630 405631 405642 405643 405653 405654 405655 405665 405666 405667

(YBB449/1) (YBB449/QT) (YBB559/1) (YBB559/QT) (YBB669/3) (YBB669/1) (YBB669/QT) (YBB779/3) (YBB779/1) (YBB779/QT)

Red Red Green Green Blue Blue Blue Black Black Black

Gallon Quart Gallon Quart 3 Gallon Gallon Quart 3 Gallon Gallon Quart

NEW SIZE

• For racing, sailing and power boats. • Suitable for salt and freshwater. • Formulated with Fluoro microadditive for a low friction surface. • Hard, smooth finish can be burnished to a very low profile. • Blue. • Quart.

404107 (V116)

Interlux Regatta Baltoplate Racing Finish

Interlux VC 17m Extra with Biolux

• A specialized antifouling bottom paint for the serious racer. • Combines superior antifouling performance with the smoothness and lubricity of a superior racing bottom finish in one coat. • Gray metallic. • Gallon.

• Thin film antifouling for racing sailboats and powerboats. • With Fluoro microadditive for a low friction surface. • Hard, smooth surface for use in fresh and low fouling saltwater. • Great for use on inflatables. • Quick drying for fast relaunch. • Blue • Quart

404804 (R3950)

404169 (YBA406)

PAINTING

Interlux Specialty Antifoulants

Interlux Trilux Prop & Drive

H B

Interlux Trilux 33 with Biolux

• Paint for outdrives, outboards and props.

405870 (5495A) Gray 405883 (5499A) Clear

• TBT Free. • No licenses required. • A tin-free antifouling formulated to provide safe, effective protection for aluminum boats, outdrives and outboards.

Interlux Trilux 33 • Paint for outdrives, outboards and props.

405863 (YBA063A) Black 405864 (YBA068A) White

Interlux Primoncon Aerosol • Formulated for use as a primer on underwater areas of aluminum outdrives and outboards.

409225 (YPA985/16)

406252 406264 406276 406290 406303 406319 406327 406339

(YBA060) (YBA060) (YBA062) (YBA063) (YBA063) (YBA063) (YBA068) (YBA068)

Blue Blue Red Black Black Black White White

Gallon Quart Gallon Gallon Quart Pint Gallon Quart

Interlux Topside Finishes

Interlux Perfection • Perfection is the ultimate performing, 2-part polyurethane gloss finish. • It provides the longest lasting, ultra high-gloss finish that has superb colour retention, together with excellent chemical, impact & abrasion resistance. • It has been formulated specifically to enable amateur users to achieve professional quality results with ease on topsides, superstructure and decks.

DMI#

MFG#

Color

Size

408030 408042 408080 408092

YHA184 YHA192 YHB000 YHB000

Mediterranean White Off White Snow White Snow White

Quart Quart Half Gallon Quart

Interlux Premium Yacht Enamel • It is a fast drying, high quality topside finish. • It has superior hiding characteristics and adhesion to properly prepared surfaces. • Good gloss and color retention.

DMI#

MFG#

Color

Size

406505 406517

Y1 Y1

High Intensity Gloss White High Intensity Gloss White

Gallon Quart

PAINTING

Interlux Topside Finishes

Interlux Brightside Polyurethane • Most technically advanced one-part polyurethane topside finish for fiberglass, wood, steel and aluminum. • Flows on smoothly and evenly, brush strokes disappear and dry to a durable, abrasion-resistant finish. • It contains an advanced ultraviolet package that insures high gloss and color retention.

DMI#

MFG#

Color

Size

407040 407052 407088 407103 407140 407228 407242 407280 407329 407343

Y4152 Y4205 Y4207 Y4208 Y4218 Y4233 Y4237 Y4241 Y4247 Y4248

Yellow Seattle Gray Bristol Beige Hatteras Off-White New Hatteras Off-White (1990) Dusk Gray Sundown Buff Sapphire Blue Sea Green Fire Red

Quart Quart Quart Quart Quart Quart Quart Quart Quart Quart

407367 407406 407432 407456 407468 407583 407709 407711 407723 407735 407761 407800 408915 408927 408941

Y4250 Y4253 Y4258 Y4259 Y4259 Y4316 Y4351 Y4353 Y4359 Y4359 Y4360 Y4381 Y4279 Y4279 Y4280

Steel Gray Ocean Blue Black Blue-Glo White Blue-Glo White Dark Blue Light Blue Medium Blue White White Matterhorn White Off-White Pre-Kote Primer - White Pre-Kote Primer - White Pre-Kote Primer - Gray

Quart Quart Quart Gallon Quart Quart Quart Quart Gallon Quart Quart Quart Gallon Quart Quart

Interlux Sea Lux Premium Alkyd Enamel

• One-part, high gloss premium marine alkyds for multiple uses in exterior and interior applications. • This high gloss finish can be used in deck, hull, cabin and interior surfaces on marine vessels. • Exhibits excellent resistance to exterior exposures. • Excellent recoatability and ease of use.

• Premium alkyd provides good color retention and protection for general purpose use. • Economical all-purpose protective finish. • VOC Compliant. • Easy to apply. • Superb recoatability.

NEW

408420 (N100) Semi-Gloss White Gallon 408424 (N4404) Super White Gallon

408422 (N401)

Flat White

NEW

Gallon

PAINTING

Interlux Primers and Specialty Products

Interlux Primers DMI#

MFG#

Description

Size

409157 409163 409150 409165 409166 409152 409154 409171 409208 409210 408915 408927 408941 409096 409097 409108 409118 409272 410744 410770 410782

Y2000E Y2000E Y2000E Y2002 Y2002 Y2002 Y2001 Y3000 YPA984 YPA984 YA4279 YA4279 YA4280 YPA200 YPA200 Y404 Y404 Y353/Y354 HT9000 HT9001 HT9002

Interprotect Primer Kit - Gray Interprotect Primer Kit - Gray Interprotect Primer Kit - Gray Interprotect Primer Kit - White Interprotect Primer Kit - White Interprotect Primer - Part A - White Interprotect Primer - Part B - Cure Interprotect Primer Kit Primocon Underwater Primer Primocon Underwater Primer Pre-Kote Primer - White Pre-Kote Primer - White Pre-Kote Primer - Gray Fiberglass No-Sand Primer Fiberglass No-Sand Primer Epoxy PrimeKote Kit- White Epoxy PrimeKote Kit - White Viny-lux Primewash Kit Epiglass HT9000 - Part A - Base Epiglass HT9000 - Part B - Fast Hardener Epiglass HT9000 - Part B - Standard Hardener

Quart Gallon 3 Gallon Gallon Quart 3 Gallon Gallon Gallon Gallon Quart Gallon Quart Quart Gallon Quart Gallon Quart Quart Gallon Quart Quart

Interlux Specialty Products

DMI#

MFG#

Description

Size

411325 411326 411327 411328 409753 409789 410542

YMA102 YMA102 YMA100 YMA100 YJB000 YJF684 Y30

Bilgekote - White Bilgekote - White Bilgekote - Gray Bilgekote - Gray Interdeck - White Interdeck - Gray Seam Compound - Brown (Below the Waterline)

Gallon Quart Gallon Quart Quart Quart

410579 404309 404323 409790 410819 410833 409323

Y31 YAV135 YAV135L Y2398C EAA201 EAA200 YMA601

Seam Compound - White (Above Waterline) Interprotect Watertite (Above the Waterline) Interprotect Watertite (Above the Waterline) Intergrip No Skid Compound Filler B Paste Filler A Paste Fiberglass Surface Prep

Quart Quart 500 ml Liter Quart Quart Quart Quart

NEW SIZES

PAINTING

Interlux Solvents

Interlux Solvents DMI#

MFG#

Description

Size

409309 409311 409373 409397 409400 409587 409676 409450 409462 409474 409638 409548 409549 410352 410364

Y202 Y202 Y216 Y216 Y216 Y2333N Y433 Y333 Y333 Y333 Y355 Y2316N Y2316N Y299E Y299E

Fiberglass Solvent Wash Fiberglass Solvent Wash Special Thinner Special Thinner Special Thinner Brushing Solvent Brush-Ease Brushing Liquid Brushing Liquid Brushing Liquid Vinyl-Lux Solvent Reducing Solvent - Spray Reducing Solvent - Spray Interstrip Interstrip

Gallon Quart Gallon Quart Pint Quart Quart Gallon Quart Pint Quart Gallon Quart Gallon Quart

These are only general requirements. Thinner quanity and type vary depending upon temperature and specific application.

Product

Brush Solvent

Spray Solvent

Clean-up Solvent

Perfection Polyurethane Brightside & Yacht Enamel Interstain Varnishes Bottom Paints (Conventional)

2333N 333 333 333 433

2316N 216 N/A 216 216

2333N or 2316N 216 333 216 216

Micron Extra, Micron CSC, Trilux 33, Trilux, Trilux II, Ultra

433

213

433 or 216

Fiberglass Bottomkote ACT Fiberglass Bottomkote Aqua VC Offshore VC 17m Extra

433 6216 355 V172

216 6216 355 V172

216 Water 355 V172

PAINTING

Interlux Cetol Marine

Interlux Cetol Marine Light

Interlux Cetol Marine Gloss

• A durable, translucent satin protective wood finish, formulated with a special alkyd resin and high quality synthetic UV-absorbing pigments which shields wood against damaging UV rays. • It produces a lighter amber appearance.

• A durable clear gloss protective wood finish, developed as a topcoat for Cetol Marine, Cetol Marine Light and now Cetol Marine Natural Teak.

408876 (IVA290) Quart

Interlux Cetol Marine Teak

Interlux Cetol Marine

• Enhance and protect the natural beauty and grain of teak. • With “Next Wave” Technology.

• A durable translucent satin protective wood finish, formulated with a special alkyd resin and high quality synthetic UV-absorbing pigments which shields wood against damaging UV rays. • It produces an attractive dark amber look to wood.

408902 (IVA316) Gallon 408903 (IVA316) Quart

408890 (IVA315) Quart

NEW SIZE

408888 (IVA300) Quart

Interlux Varnishes and Clear Wood Sealer

Interlux Fast Dry, High Durability, High Gloss Polyurethane Varnish

Interlux Schooner Gold Varnish with UV Protection

• Tough, durable finish. • Fast dry formulation minimizes dust contamination. • Completes a varnish job faster. • Contains HALS and UV absorbers to increase lifespan of coating.

• Advanced UV Technology. • Longest lasting one-part varnish - 12 months or more in Florida! • Traditional amber color. • High build formulation achieves aesthetic results in fewer coats.

408584 (YVA501) Quart 408585 (YVA501) Pint

408612 (YVA500) Quart 408624 (YVA500) Pint

Interlux Original Varnish

Interlux Goldspar Satin Varnish

• A traditional spar varnish that combines ease of application with good gloss and durability.

408561 (Y90)

Quart

• It is a modified urethane low luster varnish designed for application to interior wood surfaces only.

408547 (Y60)

Interlux Inteprime Clear Wood Sealer • Wood sealer suitable for interior and exterior use. • Recommended for sealing plywood to resist cracking and checking.

408838 (Y1026) Gallon 408852 (Y1026) Quart

Quart

Interlux Perfection Plus Varnish • Exceptional gloss and gloss retention. • Fully compatible with oily woods like teak after adequate degreasing and substrate preparation.

408408 (YVA950) Quart

Pettit Unepoxy Standard Antifouling Paint

• For fiberglass boats. • For moderate fouling condition. • It is a hard protective antifouling paint for use on boat bottoms. • Also suited for non-aluminum trailered boats.

380650 380651 380655 380656 380662 380663 380674 380675

(1228GL) (1228QT) (1328GL) (1328QT) (1628GL) (1628QT) (1810GL) (1810QT)

Blue Blue Green Green Red Red Black Black

(1218QT) (1318GL) (1618GL) (1818GL) (1818QT)

Blue Green Red Black Black

733175 733180 733181 733185 733190 733191

(1277GL) (1377GL) (1377QT) (1677GL) (1877GL) (1877QT)

Blue Green Green Red Black Black

Gallon Gallon Quart Gallon Gallon Quart

Pettit Trinidad Antifouling Paint

• Hard epoxy, strongest conventional antifouling. • Trinidad has more cuprous oxide – up to 75% depending on paint color – than any other antifouling paint, making it the strongest on the market.

• Formulated for moderate to severe fouling conditions. • A hard, modified - epoxy antifouling paint in salt and fresh water. • Can be applied, without fear of lifting, over existing bottom paints on fiberglass, steel or wood hulls. • Great for trailerable boats.

733231 733243 733281 733344 733356

H B

• Very high copper content. • Effective in worst tropical conditions. • Long term protection. • Hard finish, easily burnished. • Excellent for fiberglass, wood and steel boats.

Gallon Quart Gallon Quart Gallon Quart Gallon Quart

Pettit Unepoxy Plus Antifouling Paint

Pettit Trinidad SR Antifouling Paint - Slime Resistant

PAINTING

Pettit Yacht Antifoulants Modified Epoxy

Quart Gallon Gallon Gallon Quart

733015 733027 733039 733041 733053 733091 733104 733154 733166

(1275GL) (1275QT) (1375GL) (1375QT) (1575GL) (1675GL) (1675QT) (1875GL) (1875QT)

Blue Blue Green Green Brown Red Red Black Black

Gallon Quart Gallon Quart Gallon Gallon Quart Gallon Quart

PAINTING

Pettit Professional Coatings Antifoulants

Pettit Trinidad Pro - Slim Resistant Antifouling Paint

H B

• Trinidad Pro aggressively combats even the most torrid, tropical fouling conditions and at the same time reduces annual hull maintenance. • The only hard antifouling paint with dual biocides which is designed for the professional applicator. • Gallons.

732460 732462 732464 732466

(1082GL) (1083GL) (1086GL) (1088GL)

Blue Green Red Black

Pettit Copper-Guard Antifouling Paint

• Copper-Guard is a hard protective antifouling paint for use on boat bottoms. • It can be applied over most aged hard antifouling coatings. • It is also suitable for all nonaluminum trailered boats. • Gallons.

Pettit Trinidad 75 Antifouling Paint

732417 732429 732431 732443 732455

732948 732950 732962 732986 733003 733013

(1281GL) (1281QT) (1381GL) (1681GL) (1881GL) (1881QT)

Blue Green Green Red Black Black

A Gallon Quart Gallon Gallon Gallon Quart

A B Pettit Hydrocoat - Water Based Antifouling Paint

• Ultima SR-60 delivers exceptional, multi-season, dual-biocide performance by combining the highest ablative copper load (60%) with slime resistant Irgarol. • Contains 50% more copper than Micron Extra, to provide stronger protection in even the toughest conditions. • Its ablative surface wears away over time, reducing build up.

Blue Green Red Black

Light Blue Dark Blue Red Black Special Black

NEW SIZE

Pettit Ultima SR-60 Antifouling Paint

(1032GL) (1033GL) (1036GL) (1038GL)

(1071GL) (1072GL) (1076GL) (1078GL) (1079GL)

Pettit Ultima SSA

732366 (1042GL) Blue 732380 (1046GL) Red 732405 (1048GL) Black

732510 732512 732514 732516

• The ideal combination of bottom protection, durability, high-speed performance and economical price. • Hydrocoat is specifically formulated with a 40% cuprous oxide content durable, waterbased resins.

Gallon Gallon Gallon Gallon

732467 732470 732479 732481

(1240GL) (1340GL) (1840GL) (1640GL)

Blue Green Black Red

Gallon Gallon Gallon Gallon

Pettit Vivid Antifouling Paint - A Clean, Bright Colors

• Cuprous Thiocyanate combined with an organic algaecide offers unprecendented control over all types of fouling.

733611 733613 733623 733635 733647 733659 733661 733673

(1161GL) (1161QT) (1261GL) (1361GL) (1461GL) (1661GL) (1861GL) (1861QT)

White White Blue Green Yellow Red Black Black

Gallon Quart Gallon Gallon Gallon Gallon Gallon Quart

Pettit Prop-Koat Kit - Clear Topcoat • It is a two part clear primer and topcoat system antifouling coating for underwater metals, fiberglass and inflatable boat fabrics. • Includes: (1) Pint primer and (1) quart topcoat.

Pettit Alumacoat SR Antifouling Paint • • • • •

PAINTING

Pettit Yacht Antifoulants Ablatives

Slime resistant. Clean, bright colors. Contains PTFE for reduced friction and easy cleaning. TBT and copper free. It is an antifouling protective coating resistant to slime, algae, barnacles and other marine fouling.

733712 (1260GL) Blue 733750 (1860GL) Black 733762 (1860QT) Black

Gallon Gallon Quart

Pettit Alumaspray + Antifouling Paint

• Alumaspray + Antifouling Paint is an aerosol antifouling copolymer paint for use on aluminum outdrives and outboard motors in fresh, salt or brackish water.

733798 (1763) Black

733813 (6005/6006)

Place Your Order on the Web, Visit Donovan Marine’s E-Commerce Site.

www.donovanmarine.com/order • Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out • Works 24-7

PAINTING

Pettit Topside Paints - Easypoxy

Pettit Easypoxy • Easiest to apply high-gloss finish. • A modern, single-component polyurethane topside paint. • It’s fortified with silicone for brilliant shine and easy brushability and has ultraviolet filters for superior gloss retention.

DMI#

MFG#

Color

Size

734031 734043 734055 734067 734093 734106 734168 734219 734221 734245 734269 734283 734295 734346 734360 734384 734423 734447 734461 734485 734512 734524 734550 734562 734586 734625 734699 734702

3106 3106 3108 3108 3175 3175 3213 3229 3229 3232 3237 3248 3248 3348 3350 3415 3518 3520 3624 3626 3705 3706 3711 3711 3720 3801 6149 6149

Semi - Gloss White Semi - Gloss White Off White Off White Gloss White Gloss White Blue Ice Bikini Blue Bikini Blue Teal Blue Electric Blue Ocean Blue Ocean Blue Jade Green Kelly Green Sunflower Yellow Sandtone Grand Banks Beige Bright Red Burgundy Mist Gray Pearl Gray Platinum Platinum Dark Gray Black White Undercoat White Undercoat

Gallon Quart Gallon Quart Gallon Quart Quart Gallon Quart Quart Quart Gallon Quart Quart Quart Quart Quart Quart Quart Quart Quart Quart Gallon Quart Quart Quart Gallon Quart

Pettit Yacht White Flat

Pettit Yacht White Gloss

• Features: Proven topside protection. • Durable enamel. • Not recommended for constant immersion.

• Features: Durable enamel. • Can be brushed, rolled or sprayed.

734764 (2120)

Quart

734788 (2153)

Quart

Pettit Boot Top Paint • • • • •

Contrasting waterline stripes. Easy-brushing enamels in small convenient sizes. Used for boot tops, hull graphics and other accents. May also be sprayed, if desired. 1/2 Pint.

737758 737772 737796 737811

(8147HP) White (8216HP) Blue (8614HP) Red (8828HP) Black

PAINTING

Pettit Topside Paints

Pettit Shipendec A Traditional Marine Alkyd Enamel • It is a traditional marine alkyd enamel. • Originally developed for wooden boats, Shipendec may also be applied to properly prepared fiberglass, metal and over existing enamels. • Quart.

737188 (3303QT) Dull Dead Grass 737203 (3304QT) Marsh Grass 737241 (3333QT) Newport Grass

Z*Spar Semi-Gloss White

Z*Spar Gloss White

380372 (101QT) Quart

380357 (100GL) Gallon 380369 (100QT) Quart

Pettit Varnishes and Wood Sealer

Pettit Captain’s Ultra-Clear Varnish

Z*Spar Captain’s Varnish

• This is a premium urethane varnish with ultraviolet inhibitors to maintain outstanding gloss long after ordinary varnishes have faded. • Ultra Gold provides remarkable scratch and chip resistance.

• A high solids marine varnish that is a copolymerization of several different resins and drying oils. • It has outstanding gloss retention and all-around durability. • Contains Ultra Violet absorbers and filters.

738003 (2067QT) Quart

380458 (1015PT) Pint 380460 (1015QT) Quart 380446 (1015GL) Gallon

Z*Spar Captain’s Satin Varnish

Z*Spar Flagship Varnish

• For a satin finish below deck where you want the warmth and protection of a quality varnish without the high gloss. • Water, alcohol and oil resistant. • Not for use below waterline. • Light color makes this finish excellent to coat light or dark woods.

• Offers the highest Ultra Violet protection available today in a marine varnish. • It can be built up to many coats for a deep, rich, mirror-like finish. • The depth of gloss is increased with each coat.

380472 (2015QT) Quart

380509 (V975QT) Quart

PAINTING

Pettit Primers, Undercoaters, Compounds, Thinners and Solvents

Pettit Primers and Undercoaters DMI#

MFG#

Description

Size

735324 735336 735300 735312 735196 735209 735108 735235 735247 735172 380395 734699 734702 735045 735046 735122 733801

4700/4701 4700/4701 6999 6999 6627 6627 6455/044 6980 6980 4400/4401 105 6149 6149 6981 6981 6456 1792

Hi-Build Epoxy Primer Hi-Build Epoxy Primer Bottom Prep Sandless Primer Bottom Prep Sandless Primer Tie Coat Primer Tie Coat Primer Metal Primer Rustlok Steel Primer Rustlok Steel Primer Aluma Protect White Enamel Undercoater Easypoxy White Undercoater Easypoxy White Undercoater Trailercoat Trailercoat Underwater Metal Primer Zinc Coat Barnacle Barrier

Gallon Set Quart Set Gallon Quart Gallon Quart Quart Kit Gallon Quart 1/2 Gallon Quart Gallon Quart Quart Pint 49 oz. Kit 16 oz.

Pettit Compounds DMI#

MFG#

Description

Size

735728 737049 736404 736405

A-788 9900 7110 7510

Splash Zone Compound Skidless Compound Seam Compound - White Seam Cement - Brown

1/2 Gallon Pint Quart Quart

Pettit Thinners and Solvents DMI#

MFG#

Color

Size

735918 735920 735944 735956 736124 736150 736237 736249

120 120 121 121 185 097 095 095

Brushing Thinner #120 Brushing Thinner #120 Spraying Thinner #121 Spraying Thinner #121 ACP - Thinner Epoxy Thinner Fiberglass Dewaxer Fiberglass Dewaxer

Gallon Quart Gallon Quart Quart Quart Gallon Quart

Z*Spar Clear Wood Sealer 22

DMI#

MFG#

Description

Size

380511

S-120

Clear Wood Sealer

Quart

NEW

PAINTING

AwlGrip® AwlMix® Color Matching System As an Awlmix distributor, Donovan Marine provides a color matching service for most Awlgrip or Awlcraft 2000 topcoat colors, including special requests for custom colors. We request any new formulation from Awlgrip on your behalf and we are able to mix and match most existing formulations. By using the Awlmix software provided by Awlgrip, you can be assured we will always have the most current formulations with an extensive choice of colors created by world-wide demand from builders and boat owners. The number of formulations in this database grows every month and the input from Awlgrip color chemists is crucial, as each formulation entered is thoroughly reviewed and quality controlled to provide the formulation with the greatest consistency for our day to day operation. We can access this information 24/7, all in order to speed up delivery to you. What will Awlmix do for you? • Improved service through an added choice of color selection. • Greater ability to meet increasing customer demand of custom made colors, especially for the OEM or multi-production market. • Capability to match 48 colors on the Awlcraft 2000 metallic color card. • Opportunity to provide the color that your customer needs. Awlgrip continues to be the premium choice of topsides finishes world-wide. Using the Awlmix system to blend Awlgrip and Awlcraft 2000 topcoat colors on site shortens the lead time. Color access is now far beyond the traditional yacht and aerospace paint supplier. All colors will be shipped from our Clearwater and Annapolis facility with the corresponding shipping times and fees.

507941 Color Matched 507953 Color Matched

Gallon Quart

PAINTING

AwlGrip® Topcoat

Premium Polyester Urethane • • • • • • • •

Easy application by brush, roller or spray. Excellent distinction of image. Excellent gloss retention. Excellent fade resistance. Excellent abrasion and chip resistance. Excellent chemical resistance. For use above waterline only. 1:1 mix.

DMI#

MFG#

Color

Size

DMI#

MFG#

Color

Size

509589 509604 509628 509666 509692 509705 509820 509832 509844 509856 509868 509870 509894 509919 509933 509957 509971 509995 510001 510013 510025 510037 510075 510080 510099 510114 510126 510138

G1001 G1007 G1008 G1359 G2017 G2017 G5001 G5001 G5002 G5002 G5003 G5003 G5007 G6004 G7214 G7305 G7362 G7367 G8003 G8003 G8004 G8004 G8009 G8010 G8010 G8022 G8035 G8035

Light Gray Medium Gray Pearl Gray Kingston Gray Super Jet Black Super Jet Black Navy Blue Navy Blue Flag Blue Flag Blue Aristo Blue Aristo Blue Royal Blue Moon Dust Sunfast Red Claret International Orange Vivid Red Matterhorn White Matterhorn White Vestal White Vestal White Off-White Revisited Off White Off White Insignia White Whisper Gray Whisper Gray

Quart Quart Quart Quart Gallon Quart Gallon Quart Gallon Quart Gallon Quart Quart Quart Quart Quart Quart Quart Gallon Quart Gallon Quart Quart Gallon Quart Quart Gallon Quart

510140 510152 510164 510176 510190 510239 510253 510277 510291 510392 510417 510431 510455 510479 510493 510518 510544 510556 510568 510570 510594 510607 510619 510621 510633 510645

G8044 G8044 G8089 G8089 G8218 G9093 G9298 H1021 H1048 H4089 H4094 H4256 H4365 H5004 H5409 H7161 H8002 H8002 H8015 H8015 H8087 H8139 H8139 H8208 H8208 H9178

Snow White Snow White Cloud White Cloud White Blue Tone White Fighting Lady Yellow Federal Yellow Bright Aluminum Silver Jade Mist Green Forrest Green Sea Foam Aqua Mist Ice Blue Majestic Blue Toreador Red Cream Cream Egg Shell White Egg Shell White Fleet White Oyster White Oyster White Stark White Stark White Cordavan Gold

Gallon Quart Gallon Quart Quart Quart Quart Quart Quart Quart Quart Quart Quart Quart Quart Quart Gallon Quart Gallon Quart Quart Gallon Quart Gallon Quart Quart

Ask Salesman for Your Customized Pricing

PAINTING

Awlcraft® 2000 Topcoat

Premium Acryclic Urethane • • • • • •

Super flow out and high gloss. Fast drying to reduce dust entrapment. For use above waterline only. Ease of application. Spray application only. 2:1 mix.

DMI#

MFG#

Color

Size

DMI#

MFG#

Color

Size

509476 509488 509274 509286 509399 509402 509351

F8215 F8215 F8016 F8016 F8150 F8150 F8024

Cloud White Cloud White Cream Cream Insignia White Insignia White Matterhorn White

Gallon Quart Gallon Quart Gallon Quart Gallon

509363 509337 509349 509490 509503

F8024 F8020 F8020 F8222 F8222

Matterhorn White Off White Off White Oyster White Oyster White

Quart Gallon Quart Gallon Quart

509375 509387 509414 509426 508854 508866 509008 509034 509046 509010 509123

F8063 F8063 F8155 F8155 F2091 F2091 F5010 F5014 F5014 F5011 F6102

Snow White Snow White Stark White Stark White Super Jet Black Super Jet Black Aristo Blue Flag Blue Flag Blue Royal Blue Moon Dust

Gallon Quart Gallon Quart Gallon Quart Quart Gallon Quart Gallon Quart

AwlGrip® Clear Topcoat Bases

Clear Topcoat Bases

Clear Topcoat Base Reduce with T0016

• • • • • • •

510772 (M3146) Awl-Spar High Solids Varnish, Qt.

Easy application by brush, roller or spray. Excellent chemical and abrasion resistance. Minimizes dirt pick-up, eases cleaning. Provides resin rich, crystal clear finish. Excellent D.O.I. Not recommended over whites or light pastel colors. Not recommended for direct application to bare wood.

508878 508880 509731 509743 510758

(F3029) (F3029) (G3005) (G3005) (M3131)

Clear Topcoat Base Reduce with T0180 510669 (J3005) 510671 (J3005)

Awl-Brite Clear Base, Gallon Awl-Brite Clear Base, Quart

Awlcraft 2000 Clear, Gallon Awlcraft 2000 Clear, Quart AwlGrip High Gloss Clear, Gal. AwlGrip High Gloss Clear, Qt. Awl-Spar Classic Spar Varnish, Qt.

Ask Salesman for Your Customized Pricing

PAINTING

AwlGrip速 Topcoat Reducers and Converters

Topcoat Reducers 508183 510835 510847 510859 510873 510885 510900 510974 511104 510986 510998

(A0031) (T0001) (T0001) (T0002) (T0003) (T0003) (T0005) (T0016) (T0180) (T0031) (T0031)

Topcoat Converters

Awl-Brite Reducer, Pint Fast Evaporating - Spraying, Gal. Fast Evaporating - Spraying, Qt. Very Fast Evap. Reducer/Equip Clnr, Gal. Standard Reducer - Spraying, Gal. Standard Reducer - Spraying, Qt. Slow-Hot Weather Retarder, Qt. Awl-Spar Varnish Reducer, Qt. Awl-Spar High Gloss Sold Varnish, Qt. Standard Reducer - Spraying, Gal. Standard Reducer - Spraying, Qt.

509755 509779 509767 510328 510330 510683 510695

(G3010) (G3010) (G3010) (H3002) (H3002) (J3006) (J3006)

AwlCat #2 Spraying, Gallon AwlCat #2 Spraying, Quart AwlCat #2 Spraying, Pint AwlCat #3 Brushing, 1/2 Gallon AwlCat #3 Brushing, Pint Awl-Brite Clear Converter, 1/2 Gal. Awl-Brite Clear Converter, Pint

AwlGrip速 Surface Cleaners and Primers

AwlPrep Surface Cleaner 510950 (T0008) Gallon

AwlPrep Plus Wax and Grease Remover 511041 (T0115) Gallon

AwlPrep 400 Wipe Down Solvent 511077 (T0170) Gallon

Alumiprep 33 Cleaner, Brightener 508018 (73001) Gallon

Alodine 1201 Chrome Conversion Coating 508044 (73003) Quart

Awl-Quik Epoxy Primer/Surfacer - Yellow Base 508525 508537 508638 508640

(D8003) (D9001) (D9001) (D9001)

Base Base Converter Converter

Gallon Quart Gallon Quart

High Build Epoxy Primer 508501 508513 508652 508664 508347 508359

(D8002) (D8002) (D9002) (D9002) (D3002) (D3002)

Off White Base Off White Base Yellow Base Yellow Base Converter Converter

Gallon Quart Gallon Quart Gallon Quart

HullGard Epoxy Primer 508405 (D3707) Converter

Ask Salesman for Your Customized Pricing

Quart

AWL-FAIR L.W. Fairing Compound

545 Anti-Corrosive Epoxy Primer

508628 508630 508632 508476 508476 508478 508480 508482 508484

508260 508272 508486 508498 508323 508335

(D8200) (D8200) (D8200) (D7200) (D7200) (D7200) (D7200) (D7222) (D7222)

L.W. White Base L.W. White Base L.W. White Base Red Converter Red Converter Red Converter Red Converter Red Converter (Fast) Red Converter (Fast)

2 Gallons Gallon Quart 2 Gallons 2 Gallons Gallon Quart Gallon Quart

Epoxy Sprayable Fairing Compound 508412 (D6001) Base 508361 (D3011) Converter

Zinc Chromate Wash Primer 510203 (G9072) Yellow Base 509806 (G3014) Converter

Gray Base Gray Base White Base White Base Converter Converter

Gallon Quart Gallon Quart Gallon Quart

30-Y-94 Anti-Corrosive Chromate Epoxy Primer 510811 510823 510784 510796

Gallon Gallon

(D1001) (D1001) (D8001) (D8001) (D3001) (D3001)

PAINTING

AwlGrip速 Fairing Compound and Primers

(S9001) (S9001) (S3001) (S3001)

Yellow Base Yellow Base Converter Converter

Gallon Quart Gallon Quart

Epoxy Primer Reducers Gallon Gallon

510924 (T0006) Standard Reducer Gallon 510936 (T0006) Standard Reducer Quart 511015 (T0073) Ultra Build Reducer Quart

Awlstar速 Products and AwlGrip速 Auxiliary Products

Awlstar Gold Label Antifouling Ablative Co-Polymer 508195 508210 508222 508234 508246

(BP201) (BP401) (BP501) (BP502) (BP701)

Charcoal Black Medium Green Light Blue Deep Blue Red

Gallon Gallon Gallon Gallon Gallon

AwlGrip Additives 508107 508119 509781 509793 510708 510722

(73014) (73015) (G3013) (G3013) (M1017) (M3066)

Pro-Cure X98 Accelerator, 2 oz. Pro-Cure X138 Accelerator, 2 oz. Flattening Agent, Gallon Flattening Agent, Quart Crater-X Anti-Cratering Solution, Pt. Cold Cure Accelerator for 545, Pt.

Griptex Non Skid Additive 508068 508070 508094 508082 508145

(73012) (73012) (73013) (73013) (73237)

Fine Grit Fine Grit Coarse Grit Coarse Grit Extra Coarse Grit

Quart Gallon Gallon Quart Quart

Maintenance Products 508121 508133 508157 508169 508056

(73234) (73234) (73240) (73240) (73009)

Wash Down Concentrate, Gallon Wash Down Concentrate, Quart Protective Polymer Sealant, 1/2 Gal. Protective Polymer Sealant, Pint Tack Rags, 4 Pack

Ask Salesman for Your Customized Pricing

PAINTING

Blue Water Commercial Paints

For Professional Application Only. Not for Sale to or Use by the General Public. Marine AF 45™ Commercial Grade Antifouling

Marine AF 25™ Commercial Grade Antifouling • Low copper load ablative antifouling. • Used for fouling control on coastal vessels requiring shorter drydock intervals in low fouling waters. • Used for fouling control on flat bottoms of deep-sea vessels.

• Moderate copper load (45%) ablative antifouling. • TBT free. • Used for fouling control on coastal vessels requiring drydock intervals less than 36 months.

759211 759223 759235 759247

(4502-5G) (4502-G) (4504-5G) (4504-G)

Black Black Red Red

5 Gallon Gallon 5 Gallon Gallon

(2502-5G) (2502-G) (2504-5G) (2504-G)

Black Black Red Red

5 Gallon Gallon 5 Gallon Gallon

Marine AC 70™ Commercial Grade Anticorrosive

Marine ALKYD 50™ Commercial Grade Alkyd Finish

• Modified Epoxy. • A surface tolerant, two part tar free epoxy anticorrosive primer. • Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces.

• Marine Alkyd 50 is a single component marine grade alkyd finish. • High gloss and good color retention. • Fast drying and good leveling characteristics. • Good resistance to chemicals cleaners and abrasion.

759615 759627 759639 759641

759324 759386 759401 759425 759463 759502 759526

(7004-5GK) Black (7004-K) Black (7009-5GK) Med. Gray (7009-K) Med. Gray

5 Gallon Kit Gallon Kit 5 Gallon Kit Gallon Kit

Reducers • Use with AC 70, AC 80 or Marine Urethane for external thinning - 5% thinner by volume.

759881 (973-G) Gallon • For spray application of SPC 99 - 4 ounces per gallon recommended. • Also Alkyd 50 Primer & Finishes - interior use and/or brushing - 5% per volume.

759906 (974-G) Gallon • For spray application of AF 25, AF 45, AF 50 - 4 ounces per gallon recommended. • Also Alkyd 50 Primer & Finishes - exterior use - 5% per volume.

759172 759184 759196 759209

759920 (975-G) Gallon

(3004-G) (3012-G) (3014-G) (3021-G) (3023-G) (3035-G) (3038-G)

Marine Black Red Oxide Bright Red Int. Orange Safety Yellow White Primer Gray Primer

Gallon Gallon Gallon Gallon Gallon Gallon Gallon

Primers • Coal Tar Epoxy Primer - Heavy duty high build epoxy primer. • Recommended for saltwater immersion service.

759069 (8003-K) Black

Gallon - Kit

• Marpro Strontium Chromate Primer. • An excellent 2-part metal primer ideally suited for corrosion resistance.

759071 (8004-K) Light Yellow

2 Gallon - Kit

• Marine Rusty Metal Primer - commercial grade • Direct to rust primer

759540 (5905-G) Gray

Epifanes Clear Varnish

Epifanes Rubbed Effect Varnish

• Considered the ultimate in a high gloss finish. • Based on tung oil, phenolic-modified alkyd resins and maximum U.V. absorbers. • Outstanding protection for all marine and household woods and can be applied to interior and exterior woods above the waterline.

• A one-component interior varnish based on urethane alkyd resins, gives a rich clear amber satin finish. • Can also be applied directly to bare wood, to any interior softwood or hardwood. • It is highly recommended for cabin sole, doors and trim.

411859 (CV500) 411861 (CV1000)

1000 ml

500 ml 1000 ml

Epifanes Rapidcoat • Offers quick and easy wood protection without the hassle of sanding between coats. • Almost identical to its companion product, Rapidclear, the only difference is that Rapidcoat is lightly tinted giving the finish a rich warm color. • It’s a one-component wood finish based on a modified alkyd/urethane resin. • Can be used for renewing weathered areas prior to applying a varnish system or as a full system for those requiring a quick and easy semi-gloss finish with maximum durability, U.V. protection and longevity.

411885 (RC750)

411873 (RE1000)

PAINTING

Epifanes Yacht Coatings

Epifanes Rapidclear • Offers quick and easy wood protection without the hassle of sanding between coats. • It’s a one-component clear wood finish based on modified alkyd/ urethane resin. • Can be used for renewing weathered areas prior to applying a varnish system or as a fully system for those requiring a quick and easy semi-gloss finish with maximum durability, U.V. protection and longevity.

411897 (RCC750)

750 ml

Epifanes Wood Finish Matte Epifanes Wood Finish Gloss • The ultimate varnish alternative without sanding. • It is based on phenolic-modified resins and tung oil with microscopic porosity properties. • Specifically formulated for oily woods like teak and iroco, it has an ultra high gloss finish. • Its color is clear amber.

• The companion product to Wood Finish Gloss, offers a no sanding solution in a matte finish. • It’s a one-component varnish alternative based on urethane alkyd resins and tung oil and contains U.V. absorbers. • Specifically formulated for oily woods like teak and iroco. • Its finish is a rich matte with a clear amber color and has the appearance of being hand-rubbed.

411912 (WFM1000) 1000 ml

411900 (WFG1000) 1000 ml

PAINTING

Marpro Aerosols

Marpro Aerosols • Marpro aerosol paints are ideal for entire outboard and stern drive reconditioning or touch up! • Exact factory matched colors for Yamaha, Mercury, Johnson/Evinrude, Suzuki, Honda and more… • Acrylic lacquer formula for a long lasting glossy base coat marine finish. • To achieve the finest deep gloss finish available use Marpro Clear Coat #6-6995 as the final coat. • It also protects with UV inhibitors! • Easy to use aerosols deliver professional results every time. • Can be recoated anytime. • Excellent solvent, gasoline and wear resistance. • Meet VOC requirements. • 12 oz. canister. Marpro

Tempo #

OEM #

Color

6954 6961

173547 173744

1258

92-78373-12

Light Blue Metallic White

1978-87 1981-Pre.

Phantom Black

1960-Pre.

Charcoal Metallic

1985-Pre.

• Factory matched colors to your favorite engine manufacturer: Crusade, Caterpillar, GM, Ford, Crusader etc. • Resistant to oil and gasoline. • Fuses to the engine surface. • Can be recoated anytime. • Quick dry formula formulated for the marine environment. • 12 oz canister.

OMC Drive System Colors 6-6979

6979

395127

Suzuki Motor Colors 6-7040 6-7045

7040 7045

Shadow Black Charcoal Grey

Yamaha Motor Colors 6-6969 6-7003

6969 7003

LUB-87PNT-SL-VR

6-6995

Marpro Inboard Engine Colors

Mercury Motor Colors 6-1258

• Marpro clear coat provides that professional finish to reach a deep clear coat finish. • Many manufactures use this final clear coat finish over color base coats to provide added depth and protection. • Can be reapplied at any time with minor surface cleaning prep. • Meet VOC requirements. • 12 oz. canister.

Motor

Johnson/Evinrude Motor Colors 6-6954 6-6961

Marpro Clear Coat Formulated with U.V. Inhibitors

Metallic Blue Silver Metallic Dark Blue

1985-Pre.

6-0214 New Caterpiller Yellow 6-0225 GM Green 6-6991 (6991) Crusader Blue

Honda Motor Colors 6-7021

70021

Silver Metallic

Marpro Outboard Motor Spray Paint Display • This display includes the following: (4) 6-1258 (1258) Mercury Phantom Black (4) 6-6954 (6954) Johnson/Evinrude Light Blue Metallic (4) 6-6961 (6961) Johnson/Evinrude White (4) 6-6979 (6979) OMC Cobra Charcoal Metallic (4) 6-6969 (6969) Yamaha Metallic Blue Silver (4) 6-7003 (7003) Yamaha Metallic Dark Blue (4) 6-7021 (7021) Honda Silver Metallic (4) 6-7040 (7040) Suzuki Shadow Black (4) 6-7045 (7045) Suzuki Charcoal Grey (4) 6-6995 Clear Coat (4) 6-5605 (5605) Zinc Chromate Primer - Green (4) 6-0800 Cold Zinc Galvanizing

6-9998 Display 6-9999 Display Rack Only

Marpro Cold Zinc Galvanizing • 95% pure zinc formula. • Recommended for steel and iron surfaces (including welded joints). • Perfect for hardware corrosion protection. • 13 oz. can.

6-0800

Marpro Zinc Chromate Primers • For use on aluminum and other non-ferrous materials. • Ideal for outboard and stern drive lower unit corrosion protections. • Meets TT-P-1757A Type II. • Meet all EPA requirements and VOC requirements. • 12 oz. canister.

6-5605 Green 6-5606 Yellow

3M PPS Paint Preparation System • A unique, closed paint system which eliminates the need for traditional mixing cups and paint strainers. • Kit contains: 2 each PPS mini cups and collars, 50 PPS mini lids and liners, 20 PPS plugs, 2 PPS film inserts and 1 dispenser.

886765 886789 886771 886793 886791 886767 886769 886760

(16113) (16023) (16066) (16091) (16024) (16114) (16115) (37720)

200 Micron Cartridge Strainer Mixing Cups and Collars - Large Mini Cup Insert - 10 Per Bag Mix Ratio Insert Large - 100 Per Bag Lids and Liners - Large Lids and Liners - Mini Mixing Cups and Collars - Mini Detailing Squeeze Bottle

Corona Europa Brushes Badger Style • Soft Badger style pure China Bristle. • Black lacquered hardwood special peg handle.

570211 570223 570235 570247 570253 570257

(16038) Size: 1” (16038) Size: 1-1/2” (16038) Size: 2” (16038) Size: 2-1/2” (16038) Size: 3” (16038) Size: 4”

Throwaway Brushes White Bristle 570273 570285 570297 570300 570301 570312 570324 570325 570336 570337

Size: 1/2” Size: 1” Size: 1-1/2” Size: 2” Size: 2” - Double Thick Size: 2-1/2” Size: 3” Size: 3” - Double Thick Size: 4” Size: 4” - Double Thick

PAINTING

Paint Brushes

Marpac Paint Spray Gun • HVLP gun with durable metal body. • Designed for use with a wide variety of paints. • Includes polypropylene bottle. • Low - air and paint applied in uniform layers. • Excellent internal.

7-1069

NEW

Marpro White China Bristle Brushes • 100% White China Bristle.

7-1060 7-1061 7-1062 7-1063 7-1064

Size: 1” Size: 1-1/2” Size: 2” Size: 2-1/2” Size: 3”

Corona Urethaner Brushes • White China Bristle. • Unlacquered plastic foam Kaiser handle.

570406 570402 570403 570404 570405

(3052) Size: 1” (3052) Size: 1-1/2” (3052) Size: 2” (3052) Size: 2-1/2” (3052) Size: 3”

Corona Glasskoter Brushes • Pure White Bristle. • Solvent resistant plastic handle.

570326 570327 570329 570330

(3015) Size: 1” (3015) Size: 1-1/2” (3015) Size: 2” (3040) Size: 4”

Corona Deck and Cabin Brushes • White China Bristle. • Gloss black plastic foam Kaiser handle.

570436 570437 570449 570451 570452

(3058) Size: 1-1/2” (3058) Size: 2” (3058) Size: 2-1/2” (3058) Size: 3” (3058) Size: 4”

PAINTING

Paint Brushes, Roller Covers and Roller Frames

Wood Handle Foam Brushes 570350 570362 570374 570375

Size: 1” Size: 2” Size: 3” Size: 4”

Marpac Bucket of Savings Chip Brushes • Sold 48 brushes per bucket.

7-0508S Size: 2”

Radiator Brush

Marpro Pro Finish Mohair Roller Covers

• Black China Bristle. • 45° angle for easy access.

570460 (PB1213)

• Plastic core rollers with a red 3/16” nap produce a smooth to semi-smooth surface.

Marpro Roller Covers

7-1045 Size: 4” 7-1047 Size: 9”

• 100% polyester fabric. • Solvent resistant core.

7-1050 7-1051 7-1052 7-1053 7-1049

Size: 3” Size: 4” Size: 7” Size: 9” Size: 9”

3/8” Nap 3/8” Nap 3/8” Nap 3/8” Nap 3/16” Nap

Corona Glasskoter Roller Covers • All purpose polyester fabric with phenolic core.

Corona Ultradel Roller Covers • Hi-density golden polyester fabric with phenolic core.

570110 (R-3030F-9) 570111 (R-3050-9)

Size: 9” Size: 9”

570120 570122 570134 570146

(R-201F-3) (R-201F-4) (MPR-201F-7) (MPR-201F-9)

Size: 3” Size: 4” Size: 7” Size: 9”

3/8” Nap 3/8” Nap 3/8” Nap - Bulk 3/8” Nap - Bulk

3/8” Nap 1/2” Nap

Corona Red Mohair Roller Covers Corona Slicker Foam Roller Covers • Solvent resistant phenolic core.

570400 (R-780-012F-7) Size: 7” 570401 (R-780-012F-9) Size: 9”

• Red Mohair blend fabric with phenolic core.

570083 (R-101F-7) 570109 (R-101F-9)

Size: 7” Size: 9”

1/8” Nap 1/8” Nap

Arrow Roller Covers Marpro Cigar Foam Roller Covers 32

7-1038 Size: 4” 7-1039 Size: 6-1/2”

570021 (9FGL3) Size: 9” 570019 (9P3) Size: 9”

3/8” Nap 3/8” Nap

White Pink

Corona Twin Pack Roller Covers • Polyester fabric with cardboard core.

570499 (R-900-9)

Size: 9”

3/8” Nap

Roller Frames

Marpro Cigar Roller Frames

• Light duty use. • Threaded plastic handle with metal ring. • Four-wire birdcage.

7-1042 Size: 4” x 16” 7-1043 Size: 6-1/2” x 24”

570172 570184 570196 570209

(BC-3) (R-605T-4) (R-605T-7) (R-605T-9)

3” 4” 7” 9”

1/4” Shank 1/4” Shank 1/4” Shank

Paint Trays - 9” 570473 570474 570475 570476

(R-1310) (R-1315) (R-1300) (R-1303)

PAINTING

Paint Trays, Extensions Poles and Paint Mixing Tubs

Corona Ekono Set - Paint Tray Combo • Includes: Metal tray, 3/8" polyester sleeve with cardboard core on “skeleton” frame.

570500 (R-1000) Size: 9”

Polypropylene 2 Qt. Capacity Polypropylene 3 Qt. Capacity Bright Metal 2 Qt. Capacity Plastic Tray Liner for 570475

Mr. LongArm Pro-Pole Model Series 3200 - Light Duty • Composite fiberglass fluted handle for easy grip and anodized inner tube.

Plastic Paint and Epoxy Mixing Tubs 639306 639317 639320 639332

16 oz. 32 oz. 85 oz. 172 oz.

Plastic Pail and Lid 639344 (T45SW) 5 Gallon Plastic Pail 639356 (L40TS) Plastic Lid

460117 (3208) Length 4-1/4’ to 7-3/4’

Mr. LongArm Smart System Twist-Lok • Quality, lightweight anodized aluminum construction.

460105 (9236) Length 3’ to 6’

Corona Wood Extension Pole with Plastic Tip • Unlacquered hardwood extension pole with heavy duty plastic threaded tip.

570160 (R-1248-PT) Length 48”

Corona Metal Threaded Handle • Selected hardwood with clear lacquered finish.

575071 (R-1249-DCM) Length 4-1/2’

Pettit Strainers - Box of 100 736403 (14020)

PAINTING

Paint Accessories

PRO 1000 Komfort Coveralls

Coveralls - TC-300

• Constructed from breathable SMS non-woven material. • It features a full hood, elastic cuffs, ankles, elastic waist, breast picket, side pockets and a rear rag pocket.

• Both lightweight and durable – and is highly effective against contaminants. • Disposable. • White. • Standard. • Long sleeve. • Zipper front.

440485 (41021) 440486 (41022) 440488 (41023)

Large X Large XX Large

440470 440482 440483 440484

(TC-300) (TC-300) (43002) (43003)

Large X Large XX Large XXX Large

PRO 2000 Boot Covers

Spray Sock Hood

• Designed for workers wearing heavy boots. • One size fits all.

• Made from fiber. • Breathable nylon mesh.

440605 (40040)

440604 (40031)

Rags and Washed Diapers

Painting Gloves 440606 440607 440608 440610

(60031) (60032) (60002) (60003)

Nitrile, X Large, Box of 50 Disposable Nitrile, Large, Box of 100 Disposable Latex, Large, Box of 100 Disposable Latex, X Large, Box of 100 440606

570552 211350 460362 210550

(W-07898-37M) 5# Box White Knit Rags 25# Colored Sweat Shirt Rags (56405) 1 lb. Bag Cloth Diapers 25# White Cotton Bed Sheet Rags

3M All-Purpose Tack Cloth • 16” x 20” reusable cloth.

440608

857170 (03192)

Preval Paint Sprayer Kit - Portable • Disposable and replaceable spray power unit attaches to 6 oz. glass container. • Sprays all paints, lacquers, enamels, acrylics, primers and other liquids.

556184 (267) 556196 (268) 556209 (269)

Complete Kit Repl. Spray Power Unit Repl. 6 oz. Glass Cont.

Kardol Blue Tack Cloth 440812 (100096) 12 Per Pack

Buffalo Industries White T-Shirts 570541 (10524) 25# Box

Western Pacific Putty Knives

Western Pacific Angle Blade Scraper

• High quality stainless steel blades with Sure Grip cushion handle.

• Stainless steel. • 3" angle blade scraper.

570641 570656 570657 570653 570658

570603 (32040)

(32005) (32004) (32006) (32010) (32014)

2” 1-1/2” 2” 2-1/2” 3”

Stiff Flex Flex Flex Flex

Western Pacific Utility Knife

PAINTING

Paint Accessories

Metal Scraper • 1" x 15" double end scraper. • Fine grade tool steel, heat treated.

532893

• 4-position retractable blade. • 3 extra blades in handle. • Ideal for drywall, industrial and general use.

570689 (32065) 570691 (32070) Replacement Blades - Pack of 5

Western Pacific Window Scraper 570665 (32060) 3” 440824 (32063) Replacement Blades - Box of 100

Western Pacific ProPainter Tool • 5 in 1 tool with cushion handle. • 3-1/2” stainless steel.

Western Pacific Bronze Wool Pads

570704 (32075)

• Use to polish chrome, brass and stainless steel. • Rust resistant, use it for prepping any surface to be dressed or painted. • Sold 3 pads per poly pack.

Caulking Cotton

412356 Fine 412368 Medium 412370 Coarse

• One pound pack.

385547

Enviro-Pads - Boatyard Filtration Pads • Filtration Pads filters the copper, paint chips, biological growth, bottom sediment and containments and wash water through a doubled treated geosynthetic non-woven polyester fabrics down to very fine filtration.

759158 (EP-PAD) 15’ Wide x 25” Long 759160 (EP-ROLL) 15’ Wide x 75’ Long

PAINTING

Camco Boat Stands

Camco Powerboat Stands with Top

Camco Sailboat Stands with Top

• Camco’s Powerboat Stands offer the highest quality construction for dependable support. • Bases are constructed of a solid, cold-rolled steel tubing. • Stackable design helps save space. • Color code sticker helps match the base with corresponding size swivel top.

• Camco’s Sailboat Stands offer the highest quality construction for dependable support. • Bases are constructed of a solid, cold-rolled steel tubing. • Nestable design helps save space. • Color code sticker helps match the base with corresponding size swivel top.

480695 480700 480705 480710

480715 480720 480725 480730

(40820) (40822) (40823) (40824)

41” - 58” 28” - 46” 25” - 38” 18” - 25”

(40831) (40832) (40833) (40834)

64” - 81” 48” - 65” 35” - 52” 23” - 37”

Camco Powerboat Stand - No Top 480701 (40822) 28” - 46”

NEW Camco Sailboat Stand - No Top Camco Boat Stand Swivel Tops • Constructed of a threaded, hollow, zinc-plated steel rod; our Swivel Tops are lightweight and easy to haul without sacrificing weight-load capacity. • They also feature rounded hardware rather than straightedged which helps to prevent cutting and scraping hands. • Thick plywood head provides better rot resistance and cushion.

480735 (40840) 27-1/2” 480737 (40842) 14-1/2”

NEW SIZE

480726 (40833) 35” - 52”

NEW

Camco Boat Stand Vee Top • Constructed of a threaded, hollow, zinc-plated steel rod; our Vee Tops are lightweight and easy to haul without sacrificing weight-load capacity. • They also feature rounded hardware rather than straightedged which helps to prevent cutting and scraping hands. • Designed specifically for front hull support on sailboats and some larger deep keel powerboats.

480740 (40850) 27-1/2”

Epoxy Resins

NEW

• 2:1 mix ratio is easy to measure and mix. • Non blush formula. • Totally clear formula with excellent wet-out properties. • Especially good for exotic fabrics. • Designed to cure in cooler temperatures & on damp surfaces. • Better UV resistance.

7-2582 Resin Gallon 7-2586 Med. Hardener - Above 80° F 1/2 Gallon 7-2584 Fast Hardener - Below 80° F 1/2 Gallon

Marpro Table Top Epoxy Resin • • • • • •

Self-leveling, clear formula. Formulated for a one to one mix ratio. Designed for interior wood depth coat finishing. Apply up to 1/8” deep per coat. For use in temps above 75° F. 45 minute pot life.

6-7530 Quart Kit 6-7531 Gallon Kit

Marpro Epoxy Resin • Zero V.O.C.’s. • Formulated to be mixed at 5 parts resin to 1 part Fast or Slow Hardener. • May be used as a laminating epoxy or thickened with Marpro fillers to a desired consistency for putty and adhesive.

7-2510 7-2512 7-2514 7-2516

RESIN SYSTEMS

Marpro 2:1 Epoxy Resin

Quart .86 Quart 4.35 Gallon 52.03 Drum

Marpro Fast Epoxy Hardener • The pot life of the Fast Hardener is approximately 10 - 15 minutes at 77° F; 8 - 12 minutes at 90° F and approximately 20 minutes at 65° F.

7-2520 .44 Pint Use with 7-2510 7-2522 .86 Quart Use with 7-2512 7-2524 .94 Gallon Use with 7-2514

Marpro Slow Epoxy Hardener Travaco Gluvit • Epoxy waterproof sealer.

660426 Quart 660438 Gallon

Boat Life “Git”-Rot • A two-part liquid epoxy that penetrates and saturates dry rotted wood and restores structural strength. • Compatible with fiberglass resin, epoxies and polysulfide.

248775 (1063) 4 oz. 248787 (1064) Pint

• The pot life of the Slow Hardener is approximately 20 - 25 minutes at 77° F; 15 - 20 minutes at 90° F and 30 - 35 minutes at 65° F.

7-2528 7-2530 7-2532 7-2534

.44 Pint .84 Quart .94 Gallon 11.31 Gal.

Use with 7-2510 Use with 7-2512 Use with 7-2514 Use with 7-2516

Marpro X-Tra Slow Epoxy Hardener • The pot life of the X-Tra Slow Hardener is approximately 30 - 40 minutes at 77° F and 25 - 30 minutes at 90° F. • Use with 7-2512.

7-2540 .33 Gallon

Marpro Universal Pumps • Used for dispensing small quantities of Epoxy Resin and Hardener. • Can be used with 5:1 resins.

7-2550

Polyester Resins

RESIN SYSTEMS

Marpro Gel Coat

Marpro Premium Resin - No Wax

• Exterior gel coat is pigmented with Titanium Dioxide. • It is resilient (will withstand good impact) and it is light stabilized. • Designed for mold operation, a wax solution must be added when using for repairs to provide sandability.

• A polyester resin specially formulated to create a hard film in a minimum of time. • Can be re-laminated up to six months from initial layup with no sanding. • Contains no wax. • Has an extended shelf life.

6-7623 6-7625 6-7626 6-7627 6-7621 6-7622

Neutral for Tint Base - No Wax White - No Wax White - No Wax White - No Wax White with Wax White with Wax

Quart Quart Gallon 5 Gallon Quart Gallon

6-7410 6-7411 6-7412 6-7413

Quart Gallon 5 Gallon 55 Gallon

Marpro Premium Resin - With Wax • No shrinkage. • Tack free finish. • Cannot be coated with gel coat or paint.

6-7514 Gallon

Marpro Custom Color Gel Coat • High quality. • 5 day turnaround direct shipment. • Select from most national brand paint colors like Awlgrip, Interlux and Pettit. • With or without wax. • Available in quart, gallon or 5 gallons.

Marpro The Complete Polyester Resin Repair Kit • The kit includes: 16 oz. of Boat Yard Resin, hardener, 5 oz. of Acetone, 1 sq. yd. of Fiberglass Mat, 2” brush, 4” squeegee, latex gloves, mixing sticks, 1 sheet of sandpaper and directions.

6-7535

Contact your Donovan Sales Rep. for more details.

Marpro High Quality Vinylester Resin Marpro Wax Sol • Add to gel coat that does not contain wax to produce a tack free finish.

6-7630 4 oz. 6-7632 Gallon

For 1 Gallon

• For use in boat construction where the highest strength water intrusion resistance is required. • May be used in some vacuum infusion applications. • Contains no wax. • Has no shelf life restrictions.

6-7506 Gallon 6-7507 5 Gallon

Polyester Resins

• Permanently repair nicks, gouges and scratches in fiberglass hulls and decks. • Blend coloring agents to achieve a match to almost any color. • Complete kit contains: Colors, polyester gel coat paste, hardener, release film, mixing sticks, blending chart and instructions.

440064 (108000)

Fibreglass Evercoat Polyester Gel Paste

RESIN SYSTEMS

Fibreglass Evercoat Gelcoat Repair Kit

• Neutral color polyester paste for permanent marine repairs. • Neatly covers gouges, scrapes and scratches in fiberglass. • Can be mixed with Coloring Agents to closely match many colors. • Hardener included.

440051 (100695) Pint

Fibreglass Evercoat Gel Coat Scratch Patch • Kit includes: 1/2 fl. oz. liquid patch material, applicator tool and instructions.

Coosa Core Material Composite Panels • High-density, fiberglass reinforced polyurethane foam panels. • Reinforced with layers of woven roving fiberglass and continuous strand fiberglass.

412180 412192 412142 412166 412130 412154 412178

(B20W0025T) (B20W0050T) (PBW0050T) (PBW0075T) (PBW0375T) (PBW0625T) (PBW1000T)

1/4” Bluewater 20 4’ x 8’ 1/2” Bluewater 20 4’ x 8’ 1/2” Bluewater 26 4’ x 8’ 3/4” Bluewater 26 4’ x 8’ 3/8” Bluewater 26 4’ x 8’ 5/8” Bluewater 26 4’ x 8’ 1” Bluewater 26 4’ x 8’

439972 (105651) Clear 439984 (105652) White 439996 (105653) Buff White

Fibreglass Evercoat Spreaker Kit • Set of 3 flexible, long lasting plastic spreaders in different sizes. • For fast, smooth application of resins, body filler or crack filler.

431217 (100381) 440836 (101018) 5” Spreader

3M Scotchlite™ Glass Bubbles • This filler/resin extender can be used in mixing of marine putties and fairing compounds, as well as in fiberglass reinforced plastic layup. • These bubbles offer light-weight, minimal shrinkage and easy sanding.

852473 (86416) 10 lb. 852485 (86417) 50 lb.

NEW

Resin Additives

RESIN SYSTEMS

Marpro M.E.K.P.

Marpro High Load Filler

• A Methyl-ethyl ketone peroxide liquid hardener catalyst for all polyester resins, vinylester resins and gel coats.

• Used to build high physical strength. • Contains: Talc.

6-7500 6-7501 6-7502 6-7503 7-2580

7-2558 43 oz.

1/4 oz. For Quart 1 oz. For Gallon Pint For 5 Gallon Gallon For 55 Gallon M.E.K.P. Dispenser

Marpro Micro Cell • Creates a light weight filler that is easily sanded. • Excellent for fairing compounds.

7-2566 12 oz. 6-7581 Quart

Marpro Cab-O-Sil Resin Thickening Agent • Light weight bulking and thickening agent. • Minimal sanding required.

7-2562 6 oz. 6-7578 10# 6-7579 Quart

Marpro Styrene • Resin and gel coat thinner. • Use up to 10% with polyester resin. • Use up to 5% with gelcoat.

6-7475 4 oz. 6-7620 Pint

Marpro Microflock • Cotton flocking thickening agent.

7-2554 20 oz.

Marpro Coloring Agents • Popular color matching agents that blend with polyester resins, gel paste and epoxy resins, Formula 27 and various putties. • Use 1 oz. color per quart of resin. • Use very small amounts to tint fiberglass repair putty or scratch patch.

6-7544 6-7545 6-7546 6-7547 6-7548 6-7549 6-7550 6-7551

Green Red Gold Brown Blue Black White White

1 oz. Jar 1 oz. Jar 1 oz. Jar 1 oz. Jar 1 oz. Jar 1 oz. Jar 1 oz. Jar 4 oz. Jar

Marpro Resin Rollers 6-7640 Dimensions: 1/2” x 3” 6-7641 Dimensions: 3/4” x 6”

Marpro Milled Fibers • Used to thicken polyester and epoxy resins.

6-7570 Quart

Marpro Micro Balloons • Use for thickening epoxy and polyester resins. • Larger particle size, used for fairing compounds and putty.

7-2570 7-2574 6-7575 6-7576

5 oz. 4# Quart Gallon

Marpro Fiberglass Cloth Tape

Marpro Fiberglass Mats

• The finest quality fiberglass cloth woven in narrow widths with non-raveling edges.

• 100% fiberglass in a non-woven state. • Use as reinforcement for polyester or epoxy resin. • Finishing mat.

6-7610 6-7611 6-7612 6-7613

2” x 50 yds. 4” x 50 yds. 6” x 50 yds. 12” x 50 yds.

6-7600 6-7601 6-7603 6-7604 6-7605

Marpro Fiberglass Woven Roving • Heavy weight fiberglass fabric. • Very bulky for stronger repair applications where large build-up is needed.

38” x 1 yd. 38” x 3 yds. 50” x 1 yd. 50” x 3 yds. 50” x 73 lineal yds.

Marpro Combination Mats • 24 oz. woven stitched to 1.5 oz. chopped strand mat.

6-7608 6-7594 6-7588 6-7589 6-7606

6-7595 38” x 1 yd.

RESIN SYSTEMS

Marpro Fiberglass Cloth and Mats

50” x 1 yd. 50” x 1 yd. 6” x 50 yds. 12” x 50 yds. 50” x 60 lineal yds.

• 12 oz. woven stitched to 1/2 oz. chopped strand mat.

6-7586 50” x 60 lineal yds. • 17 oz. woven stitched to 1/2oz. chopped strand mat.

Marpro Fiberglass Cloth

6-7587 50” x 60 lineal yds.

• The finest quality 7-1/2 oz. fiberglass cloth available for use with polyester and epoxy resins and gelcoats.

6-7590 6-7591 6-7592 6-7593 6-7585

38” x 1 yd. 38” x 3 yds. 50” x 1 yd. 50” x 3 yds. 38” x 60 yds.

Marpro Floatation Foam

Marpro Floatation Foam • A 1 to 1 mix liquid urethane foam with 2 pounds per cubic foot density which is not affected by solvents or gasoline. • Produces 4 cubic feet per gallon. • It bonds to wood, metal or fiberglass and foams wherever it is poured. • Provides extra flotation in boats and sound proofs and insulates hulls, walls, floors, seats, decks, or any cavity. • Do not use below 70°.

6-7560 6-7562 6-7565 6-7566

2 Quart 2 Gallon 2 Quart 2 Gallon

2 lbs. Density 2 lbs. Density 4 lbs. Density 4 lbs. Density

Glue

RESIN SYSTEMS

Marpro Epoxy Glue

Permatex Super Glue Gel

• • • •

• This no run gel formula “stays put” for precise application, even on vertical surfaces. • Also ideal for overhead or hard-to- reach surfaces. • It works on both porous and nonporous materials. • Suggested applications: Metal, plastics, rubber, vinyl, paper, wood, textiles and cork gaskets.

High viscosity. One to one mix ratio. 45 minute pot life; sandable in 4 hrs. Excellent bonding to properly prepared surfaces.

6-7520 Pint Set 6-7521 Quart Set 6-7522 Gallon Set

3M Fastbond 10 Neutral Contact Adhesive • A brushable, air-drying, neutral-colored contact adhesive used for bonding decorative laminates, aluminum, steel, wallboard, plywood, panels, wood and wood veneer, rubber canvas and other porous and non-porous materials to each other or to themselves.

856538 (20272) Quart 856539 (20274) Gallon

545179 (82191) .07 oz. Tube

Permatex Cold Weld Bonding Compound • A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. • Once cured, it can be drilled, sanded, painted or filed. • Resists most automotive, shop and cleaning fluids. • Withstands temperatures to 300°F intermittent. • Over 3,000 PSI shear strength on steel. • Suggested applications: Aluminum, steel, brass, bronze, castings and stampings.

545016 (14600) Two 1 oz. Tubes

Fibreglass Evercoat Epoxy Glue Syringe • Crystal clear liquid formula is great for the small jobs demanding an epoxy. • Sets in five minutes and has full 1,500 lb. strength in one hour. • Marine formula resists water, brine, sun, chemicals and fuels. Bonds to wood, metal, glass, fiberglass, gelcoat, ceramics and most plastics.

440075 (108017)

Travaco Marine-Tex

Interlux Watertite Epoxy Compound

• Self-hardening plastic metal. • Repairs damaged hulls, dry rot, leaky tanks and engine blocks in minutes. • Watertight! • Stronger than before mishap. • Handles like putty. Hardens like steel and sands like wood. • Can be drilled, threaded, sanded and painted.

• Epoxy filler fairing compound. • Excellent for fairing to a perfect surface and ideal for keels and hulls. • The solution for filling blister holes. • Stops water penetration.

660399 660402 660414 660363 660375 660387

White Jr. White White Grey Jr. Grey Grey

2 oz. 14 oz. 2.5 lbs. 2 oz. 14 oz. 3 lbs.

RESIN SYSTEMS

Epoxy Based Fillers

404309 (YAV135) 24 oz. 404323 (YAV135) 48 oz.

Star Brite Epoxy/Aluminum Putty Stick Rapid-Set Marine-Tex

• Makes permanent and emergency repairs on aluminum boats, outdrives, fuel and water tanks and other aluminum parts. • Easy to use; just hand knead for 1 minute and apply to damaged area.

• Convenient repair paste, one to one mix, for emergency or permanent repairs. • Bonds to wood, steel, aluminum and fiberglass.

431356 (87004) 4 oz.

660427 (301BU)

Pettit A-788 Splash Zone Compound 735728 (A-788) Half Gallon Kit

Polyester Fillers

Marpro Marine Putty BPO-Cured

3M Marine Premium Filler

• White, polyester based marine putty that is cured with a BPO hardener (included). • This is a fast putty that allows the user to sand within 20 minutes of application. • No shrinkage. • Approved for use below the waterline.

• It is a two-component vinyl ester filler designed for marine filling and fairing of fiberglass, wood, aluminum and steel surfaces above and below the waterline.

852499 (46004) Pint 852500 (46005) Quart 852512 (46006) Gallon

6-7637 1/2 Pint 6-7638 Pint 6-7540 Quart

Polyester Fillers

RESIN SYSTEMS

3M Marine Lightweight Body Filler

3M Marine High Strength Repair Filler

• This vacuum processed lightweight body filler is designed to be used for filling and shaping prototypes and plugs in the OEM Plug/Mold Department.

• It is a two-component vinyl ester filler formulated with short strand fiberglass for blister and other semi-structural repairs, above and below the waterline.

856724 (05801) Gallon

852548 (46013) Quart 852550 (46014) Gallon

Fibreglass Evercoat Formula 27 Plastic Filler • Finest quality, extra-white plastic filler for filling dents, scrapes and gouges.

431255 (100572) Half Pint 431267 (100571) Pint 431279 (100570) Quart

Fibreglass Evercoat Polyester Fiberglass Repair Kit • Includes: 1/2 pint of polyester resin with hardener, 3 sq. ft. of fiberglass cloth, spreader stick, mixing tray and instructions.

Fibreglass Evercoat White Cream Hardener

NEW

• Hardening agent to use with all polyester fillers. • White BPO formula maintains color of filler to minimize excessive priming.

431281 (101607) 4 oz.

3M Marine Cream Hardener • A red cream hardening agent designed to be used with 3M Marine Lightweight Body Filler.

856736 (05830) 2.75 oz.

431231 (100637) • Includes: 1 quart of polyester resin, 11 cc tube of hardener, 6 sq. ft. fiberglass mat, 3" x 5' tape, mixing cups, sticks and instructions.

431229 (100370)

3M Marine Cream Hardener • A blue cream hardening agent designed to be used with 3M Zebra Fillers (Part #05868, #05870 and #05871) and 3M Piranna Putty (Part #05821).

856748 (05766) 2.75 oz.

Fibreglass Evercoat Polyester Glazing Putty • A thick, creamy, smooth texture works well for minor scratch filling, pinholes, grind marks and other surface imperfections before the final finishing. • Apply over other polyester fillers; resin lay-ups, damaged fiberglass, gelcoat, metal, and wood.

431243 (100400) 2.2 lbs.

3M Marine Putties • Acryl-Marine Putty - White.

856774 (05962) 21 oz. • Acryl-Blue Glazing Putty.

856798 (05964) 21 oz.

856774

Permatex High-Temp Red RTV Silicone Gasket

Permatex Sensor-Safe Blue RTV Silicone Gasket

• Formulated for hi-temp applications or heavy duty use. • Temperature range -75° F to 650° F intermittent. • First generation 1970-1980 gasket maker.

• Temperature range -65° F to 500° F intermittent; resists auto and shop fluids. • First generation 1970-1980 gasket maker. • Suggested applications: Valve covers, oil pans, timing covers, water umps, thermostat housings, transmission pans.

545129 (81160) 3 oz. Tube

ADHESIVES /SEALANTS

Permatex Sealants

545092 (80022) 3 oz. Tube

Permatex Form-A-Gasket No. 2 Sealant

Permatex Ultra Black Gasket Maker

• Slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. • Temperature range -65° F to 400° F; resists common shop fluids and fuels.

• Fast-curing formula. • Sensor-safe, low odor, noncorrosive. • Meets performance specs of OE silicone gaskets. • Retains high flexibility, oil resistance properties through use of patented adhesion system. • Temperature range -75° F to 600° F intermittent.

545078 (80015) 1.5 oz. Tube

Permatex Ultra Blue RTV Silicone Gasket Maker • Temperature range -75° F to 500° F intermittent; resists auto and shop fluids and vibration.

545143 (81724) 3.35 oz. Tube

Permatex Ultra Copper RTV Silicone Gasket Maker • For 4-cylinder, turbocharged or highperformance engines. • Sensor-safe, low odor, noncorrosive. • Temperature range -75° F to 700° F intermittent.

545155 (81878) 3 oz. Tube

Permatex Aviation Form-A-Gasket No. 3 Sealant • Slow-drying, non-hardening brush-top sealant. • Temperature range -65° F to 400° F.

545080 (80019) 4 oz. Bottle

545167 (82180) 3.35 oz. Tube

Permatex Anaerobic Gasket Masker • Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. • Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. • Suggested applications: Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, o-ring replacement.

545042 (51813) 50 ml Tube

3M High Temp Gasket Silicone • A rapid curing form-in-place gasket adhesive/sealant for engines. • It is a flexible, noncorrosive, oxygen sensor safe compound designed to be used as a gasket material for valve covers, oil pans and other engine and transmission applications. • Black.

856382 (08672) 3 oz. Tube

Adhesives/Sealants for Above or Below Waterline

ADHESIVES /SEALANTS

3M Marine Adhesive/Sealant Fast Cure 4200

3M Marine Adhesive/Sealant 5200

• A one-part general purpose polyurethane that chemically reacts with moisture to deliver flexible bonds with good adhesion to wood, fiberglass, gelcoat, plastics and metals. • Forms watertight, weather resistant seals on joints and boat hardware above or below the waterline.

• High performance polyurethane adhesive/ sealant becomes tack free in 48 hours, completely cures in 5-7 days with no shrinkage. • Retains its strength above or below the waterline. • Stays flexible too – allows for structural movement. • Has excellent resistance to weathering and saltwater. • Won’t sag or flow in vertical or horizontal seams.

856140 (05260) 3 oz. Tube White 856142 (06560) 10 oz. Cart. White 856144 (06564) 10 oz. Cart. Black

3M Marine Sealant 101 • This high quality polysulfide bedding and deck seam sealant chemically cures to form a firm, rubbery watertight seal. • Seals between mechanically fastened joints on wood, fiberglass, metal and most plastics; above and below the waterline. • Non-sagging, non-shrinking formula becomes tack free in 5 hours and remains permanently flexible.

856178 (06510) 10 oz. Cart. White

3M Marine Sealant Fast Cure 4000 UV • Resistant to weathering, saltwater, and stresses caused by joint movement. • Seals between mechanically fastened joints on wood, fiberglass, metal and most plastics above and below the waterline.

856153 (05280) 3 oz. Tube White 856154 (06580) 10 oz. Cart. White

856027 856041 856053 856091 856104 856116 856130 856003

(05203) (05205) (05206) (06500) (06501) (06502) (06504) (21463)

3 oz. Tube 3 oz. Tube 1 oz. Tube 10 oz. Cart. 10 oz. Cart. 10 oz. Cart. 10 oz. Cart. 5 Gal. Pail

White Black White White Tan Mahogany

Black White

3M Marine Adhesive/Sealant Fast Cure 5200 • A faster curing version of 3M Marine Adhesive/Sealant 5200. • The high performance polyurethane becomes tack free in one hour and fully cures in approximately 24 hours. • The seal is extremely strong, retains its strength above or below the waterline. • Stays flexible too - allows for structural movement. • Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. • Has excellent resistance to weathering & salt water.

856135 (05220) 3 oz. Tube White 856136 (06520) 10 oz. Cart. White

Boat Life Life-Calk Sealants

Boat Life-Seal Sealants

• A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted and used above and below the waterline. • Tack-free in 1 to 3 days. • Will bond to fiberglass, wood, metal, glass and itself. • Cures to a positive waterproof seal. • Twists, bends, expands, compresses. • Can be applied to damp surfaces. • Do not use on Lexan or ABS.

• A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. • Offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. • May be used above or below the waterline. • Permanently flexible, non- shrinking and non-cracking. • Use on Lexan, ABS, metal, glass and wood.

248460 248472 248509 248511

(1030) (1031) (1033) (1034)

2.8 oz. Tube 2.8 oz. Tube 10.6 oz. Cart. 10.6 oz. Cart.

White Black White Black

248612 248624 248635 248662 248674

(1109) (1160) (1161) (1169) (1170)

1 oz. Tube 2.8 oz. Tube 2.8 oz. Tube 10.6 oz. Cart. 10.6 oz. Cart.

ADHESIVES /SEALANTS

Adhesives/Sealants for Above or Below Waterline

Clear Clear White Clear White

Adhesives/Sealants for Above Waterline

Marpro Marine Grade Silicone Sealant

3M Marine Grade Mildew Resistant Silicone

• Is a high performance silicone which exhibits excellent adhesion to glass, metal, porcelain, ceramic, fiberglass and other non-porous surfaces. • Cures to a tough, rubbery and permanently flexible sealant.

• A mildew resistant non-sagging, moisturecuring silicone rubber sealant.

7-2505 10.1 oz. Cart. 7-2507 10.1 oz. Cart.

Clear White

856318 856332 856356 856370

(08017) (08019) (08027) (08029)

3 oz. Tube 3 oz. Tube 10 oz. Cart. 10 oz. Cart.

White Clear White Clear

Caulking Gun • All welded construction. • A reliable tool to deliver caulk.

249107 (6001)

• Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out • Works 24-7

3M Adhesives

3M Super 77 Multipurpose Adhesive

3M Super Trim Adhesive

ADHESIVES /SEALANTS

• High tack, high coverage and fast drying for permanently attaching foils, carpeting, lightweight foams, paper, cardboard, felt and, cloth to painted or unpainted metals, wood and hardboard.

• Fast acting, high strength, aerosol contact adhesive designed for two surface application. • This adhesive is resistant to heat and plasticizing oils and is excellent for attaching vinyl, insulation, foam, padding and rubber parts to metal and other surfaces.

856537 (21210) 24 fl. oz.

856535 (08090) 19 fl. oz.

3M Super Weatherstrip and Gasket Adhesive

3M Feathering Disc Adhesive

• For adhering all types of weatherstrip to doors. • Very fast drying, exceptional bonding strength. • Used as a gasket adhesive on engines.

856533 (08001) 5 oz. Tube

• It is specially formulated to allow multiple disc applications without adhesive buildup or paper delamination. • Discs remove easily and cleanly. • Sold 6 per case.

856534 (08051) 5 oz. Tube

Adhesive Cleaners and Removers

3M General Purpose Adhesive Cleaner

3M Citrus Base Industrial Cleaner

856525 (08987) 20 fl. oz. 856536 (08984) Quart

• An aerosol, all-natural cleaner which will dissolve and flush away dirt, grease, tar, most non-curing type adhesive films, and similar substances.

3M Citrus Base Adhesive Remover • A multi-purpose aerosol cleaner effective in removing many partially dried and some types of fully cured adhesives without leaving a residue.

856527 (49048) 24 fl. oz.

857411 (76394) 24 fl. oz.

3M Scotch-Weld Solvent No. 2 - Clear • Can be used for removing oil soluble or oil resistant adhesives, coatings or sealers.

856523 (21429) Quart

Boat Life Release Adhesive & Sealant Remover • Ideal for removing cured silicone, polyurethane and polysulfide. • Removes tapes, labels, and decals from metal, fiberglass and wood.

248579 (1288) 16 fl. oz.

Boat Life Life-Calk Solvent and Cleaner • Removes uncured Life-Calk from hands, tools and clothing.

248573 (1056) Pint

Masking Tape

3M Scotch Performance Masking Tape - 233 +

3M Scotch Long-Mask Masking Tape 2090 - Bright Blue Color

• A revolutionary new masking tape with enhanced performance characteristics. • Ideal for use at the OEM or yard, this easily identifiable green tape is highly conformable with improved adhesive transfer resistance. • Sold 24 rolls per case.

• Utilizes a synthetic adhesive system which provides U.V. stability and adhesive transfer resistance up to seven days after application. • Controlled crepe paper backing makes tape conformable and smooth for use in various paint, varnish masking applications.

855179 855178 855177 855140

855481 855493 855506 855518

3/4” x 60 yds. 1” x 60 yds. 1-1/2” x 60 yds. 2” x 60 yds.

(06817) (06818) (06819) (06820)

3/4” x 60 yds. 1” x 60 yds. 1-1/2” x 60 yds. 2” x 60 yds.

48 Rolls Per Case 36 Rolls Per Case 24 Rolls Per Case 24 Rolls Per Case

TAPES

(26334) (26336) (26338) (26340)

Intertape Polymer Group Orange Mask Marine Masking Tape • Innovative high performance masking tape designed specifically for the marine composites industry. • Highly conformable and flexible. • Tear, moisture and solvent resistant. • UV resistant up to 72 hours. • Clean removal, crisp paint lines. • Controlled unwind, good adhesion to backing when layered. • Great for bottom painting or in-mold masking.

812304 1” 812316 2”

• For use in hull, exterior, deck and cabin applications requiring UV resistance. • Smooth backing for superior paint lines. • Clean, easy removal even after exposure to sunlight for 14 days. • Ideal for outdoor masking.

NEW 3M Scotch Masking Tape - 2040 • This masking tape gives good protection yet removes cleanly and easily. • Note: Not for extended outdoor use.

855190 855203 855215 855239

(02991) (02992) (02993) (04365)

3/4” x 60 yds. 1” x 60 yds. 1-1/2” x 60 yds. 2” x 60 yds.

Intertape Polymer Group Day Blue Masking Tape

48 Rolls Per Case 36 Rolls Per Case 24 Rolls Per Case 24 Rolls Per Case

812328 (PT14-36) 1” 812330 (PT14-48) 2”

NEW 3M Highland Masking Tape - 2727 • A tan smooth crepe paper treated with a heat and solvent resistant saturant. • An automotive refinish masking tape with high adhesion ideal for most paint masking applications.

855320 (06544) .94” x 60 yds. 24 Rolls Per Case 855322 (06543) 1.89” x 60 yds. 24 Rolls Per Case

Masking Tape

3M Scotch Silver Weather Resistant Masking Tape - 225 • The silver colored coating on the backing of this crepe paper tape reflects ultra-violet light to provide weather resistant for up to a month’s time. • Prevents slivering and adhesive transfer during unmasking.

855277 (02828) 3/4” x 60 yds. 855278 (02829) 1” x 60 yds. 855280 (04597) 2” x 60 yds.

48 Rolls Per Case 36 Rolls Per Case 24 Rolls Per Case

3M Scotch Masking Tape - 2050 • A medium level of adhesive tape to release cleanly and easily from previously painted surfaces, including painted wallboard. • Ideal for re-paint applications. • Conforms well to most surfaces, which produces an excellent paint line. • Typically used at room temperature, but will function up to 200° F for up to one hour.

TAPES

855126 (05617) 3/4” x 60 yds. 855138 (05618) 1” x 60 yds. 855164 (05620) 2” x 60 yds.

48 Rolls Per Case 36 Rolls Per Case 24 Rolls Per Case

3M Scotch Fine Line Tape - 218 • Note: Not for extended outdoor use.

855330 855227 855378 855380

(06301) (04698) (04699) (04700)

1/4” x 60 yds. 1/2” x 60 yds. 3/4” x 60 yds. 1” x 60 yds.

12 Rolls Per Case 72 Rolls Per Case 48 Rolls Per Case 36 Rolls Per Case

3M Scotch Plastic Tape - 471 • A blue vinyl plastic tape that is highly conformable and is excellent for masking off areas for detailed boat and boot stripe painting.

855405 (03120) 3/4” x 36 yds. 855406 (03121) 1” x 36 yds.

Intertape Polymer Group High Performance Masking Tape • For use in open molding, cast polymer, solid surface and multiple industrial paint applications. • Sharp color separation on curves or straight lines. • Resists bleed through. • Moisture and solvent resistant. • Clean removal; residue free. • Removes in one piece without tearing. • Great for bottom painting or in-mold masking.

812342 (88075) 1” 812354 (88078) 2”

NEW 50

48 Rolls Per Case 36 Rolls Per Case

3M General Purpose Polyester Tape • Silicone adhesive. • Used in a variety of high temperature masking applications including powder coating and flashbreaker applications. • Designed to remove cleanly from most surfaces.

855417 (8951) 2” x 72 yds.

24 Rolls Per Case

3M Scotch Brand Safe-Release Painters Masking Tape - 2080 • A low-medium adhesion tape that is ideal for smooth, freshly painted surfaces, striping, vinyl coated wallpaper and glass.

855520 (79748) 1” x 60 yds. 36 Rolls Per Case 855525 (79749) 1-1/2” x 60 yds. 36 Rolls Per Case 855532 (79750) 2” x 60 yds. 24 Rolls Per Case

Masking Paper and Protection Tape

• This masking paper is designed for noncritical masking applications or when paint is applied by brush or roller. • This paper is not generally recommended for spray painting applications. • Sold 12 rolls per case.

855772 (52011) 18” x 180’

3M Hand Masker Pre-Folded Masking FIlm Rolls

3M Ready-Mask Pre-Taped Masking Film with 3M Long-Mask Masking Tape - 2090 • A convenient, pre-taped plastic film which unfolds to cover and protect various surfaces while painting. • Specially treated film clings to surfaces and is easy to clean up. • Pre-taped with 3M Long-Masking Tape, which is sunlight stable and gives the user 7-day clean removal.

855900 (06696) 24” x 30 yds. 855901 (06697) 35” x 25 yds.

TAPES

3M Utility Grade Masking Paper - Green

• High-density, non-porous film. • Used for paint masking and paint overspray protection. • Sold 12 rolls per case.

855859 855873 855897 855899

(06845) (06848) (77406) (77407)

MF-24 - 24” x 180’ MF-48 - 48” x 180’ MF-72 - 72” x 90’ MF-99 - 99” x 90’

3M Hand Masker Premium Quality Masking Paper • Designed to minimize bleed-through and general purpose paper is ideal with water-based coatings.

855770 (77399) 12” x 60 yds.

3M Scotchblok Masking Paper • It is tightly bonded, specially coated and manufactured specifically for automotive aftermarket applications. • It is designed to be used with 3M masking tapes and 3M masking equipment. • Sold 12 rolls per case.

855784 (06732) 12” x 180’ 855786 (06738) 18” x 180’

Intertape Polymer Group Anchor Hand Mask Hand Masking Film • Premium hand masking film designed for the marine and composites industry. • Easy to work with. • Durable film resists tearing; requires less tape. • Film and tape are applied simultaneously. • Solvent resistant. • Clings to surface, preventing overspray. • Designed to work with multiple hand dispensers. • Compact size. • Great for bottom painting or in-mold masking.

812366 (HMF-48) 48” 812378 (HMF-99) 99”

NEW

Masking Paper 440800 (140736)36” x 400’

3M Specialty Tape

3M Scotch Premium Heavy Duty Packaging Tape - 3750 • Stronger, conformable 2.0 mil, 3M Scotchpro film that provides a consistent, uniform seal with no water or sticky cleanup. • This product resists center splitting, seals out moisture, dust and dirt. • Its aggressive adhesive allows tape to stick instantly and hold tightly. • Clear. • Sold 36 rolls per case.

3M Silver Duct Tape - 3939 • Designed for general purpose use in bundling, sealing and holding applications. • Sold 24 rolls per case.

855582 (06975) 2” x 60 yds.

TAPES

855657 (06640) 1.89” x 60 yds.

Marpac Teflon Tape • Pipe joint sealing tape. • 1/2" x 50'.

7-0305

Pipe Thread Tape 512144 (510W) 1/2” x 520”

3M Scotchlite Reflective Material 3M Preservation Sealing Tape - 4811 • 3M Preservation Sealing Tape 4811 is a white polyethylene backing with a unique rubber adhesive that provides excellent performance as an industrial preservation tape. • Sold 24 rolls per case.

855410 (62334) 2” x 36 yds.

• Scotchlite SOLAS Material is a silver, flexible high intensity reflective material with an aggressive pressure sensitive adhesive. • It has an encapsulated lens optical design that provides high reflectivity over a wide range of entrance angles. • Material is Coast Guard and IMO Certified. • Sold 1 roll per case.

855633 (88619) 2” x 50 yds.

3M Heavy Duty Protection Tape - 346 3M Cloth Utility Rolls • Used for light deburring, clean-up, blending and finishing metal surfaces. • 50 yds. x 1” W.

855001 (05002) 320J Grade 855037 (05006) 180J Grade 855051 (05010) 80J Grade

• Sold 4 rolls per case.

855619 (05418) 12” x 60 yds.

Safety Products

3M 6000 Series Full Facepiece Respirators

MSA Ultra-Twin Full Facepiece Respirator

• • • •

• Features an inturned lip around the edge for a secure, comfortable seal against the face, a large chin cup for easy positioning, as well as five suspension headstraps and roller buckles that hold the facepiece in place.

Lightweight balanced respirator. Soft, lightweight facepiece material. Easy-to-adjust headstraps to allow maximum comfort. No retainers or extra parts are required to attach filters, cartridges or dual airline. • NIOSH approved.

(54146) Medium - 6800 (54159) Large - 6900 (52634) Replacement Faceshield Cover (37004) Repl. Nose Cup Assembly

SAFETY

857053 857054 856655 857035

773227 (480259) Medium

3M Dual Cartridge Respirator Assembly 3M 6000 Series Low-Maintenance Respirators • A NIOSH/MSHA approved half-mask respirator. • Its low maintenance, comfortable design allows greater worker flexibility by the use of five different type cartridges and two types of prefilters for a variety of work environments.

857044 857046 854299 854287 854984 854996 857041 857039

(07025) (07026) (2091 P100) (2071 P95) (05N11) (00501) (21674) (07047)

Medium - 6200 Large - 6300 Particulate Filter - 2 Per Pack Particulate Filter - 2 Per Pack Prefilter - 10 Per Pack Prefilter Retainer - 20 Per Pack Organic Vapor Cartridge

• This NIOSH/MSHA approved maintenance-free respirator offers a new level of comfort and protection in painting applications. • Not for use against paints containing isocyanates. • Includes one pair of 5P71 P95 particulate filters and one pair of 501 filter retainers.

856611 (52P71) Medium 856623 (53P71) Large 856625 (5P71) Particulate Filter - 10 Per Box

Organic Vapor/Acid Gas Cartridge

3M Respirator Cleaning Wipes • Designed for use with the 3M 5000 Series, 6000 Series and 7000 Series Half Mask and Full Facepiece Respirators.

856659 (504) 100 Per Box

Safety Products

SAS Safety Products Bandit Halfmask Respirator

3M 7500 Series Reusable Respirators

• Made from soft blue thermoplastic elastomer (TPE). • Face piece is supple form fitting and can be worn for hours. • NIOSH approved.

812479 (8661-92) 812479S (8661-92) 812481 (8661-93) 812481S (8661-93)

Medium Medium Large Large

Single 12 Pack Single 12 Pack

• Made from soft, resilient silicone and heat-resistant plastics. • Yoke won’t get hot to the touch like metal yokes. • New valve design helps make breathing easier and helps reduce heat and moisture buildup in the facepiece. • Advanced silicone material provides a softer feel on the face. • Dual-mode head harness.

857049 (37082) 857051 (37083) 854300 (2097)

Medium Large Particulate Filter

NEW SAFETY

3M 8247, R95 Particulate Respirator • Constructed with 3M recommended nuisance level for organic vapor relief. • NIOSH certified to provide at least 95% efficiency against solid and liquid particles, including oils.

3M 8212, N95 Particulate Respirator • Designed for welding, torch cutting, soldering, brazing and working with molten metals. • Cool Flow exhalation valve, adjustable straps, Advanced Electret Media, cake-resistant filter media and faceseal.

856572 (8247 R95) 20 Per Bag

3M 8210, N95 Particulate Respirator

856560 (8212 N95) 10 Per Bag

3M 8511 Particulate Respirator

• Meets NIOSH 42 CFR 84 N95 requirement. • Adjustable nose clip.

856630 (8210 N95) 20 Per Box

SAS Safety Products N95 Particulate Respirator • • • • •

NEW

812455 (8610)

• Box of 5 pairs.

812467 (8661-20)

856550 (8511) 10 Per Box

SAS Safety Products N95 Valved Particulate Respirator

Inner foam provides a custom seal. Dual head strap for optimum fit. Maintenance-free. NIOSH approved. Box of 20 masks.

SAS Safety Products Bandit N95 Pre-Filter

• The 3M Cool Flow Exhalation Valve reduces heat and humidity build up inside the respirator. • The innovative “M” nose clip helps provide a good seal against the face.

NEW

• • • • • •

Exhalation Valve for Extra Comfort. Inner Foam Provides a Custom Seal. Dual Head Strap for Optimum Fit. Maintenance-Free. NIOSH Approved. Box of 10 masks.

812457 (8611)

NEW

3M Safety Products

3M Safety Goggles • They’re designed to fit individual face sizes and will fit over most prescription glasses. • For sawing, drilling, routing, grinding, sanding and wire brushing. • Ventilation holes help prevent fogging.

856558 (8567ES)

SAS Safety Products NSX Eyewear Clear Lens, Black Temple with Polybag • • • • • •

High-impact polycarbonate lenses. Lightweight wrap-around lens. Scratch-resistant lenses. 99.9% UV protection Anti-fog coating on lenses. Single lens design.

812506 (5340)

NEW 3M Sting-Rays Protective Eyewear

856651 (37104) Clear Lens

3M Faceshield Kit

SAFETY

• Lightweight, contemporary style frames that offer side and brow protection. • The lens are made of durable, hardcoated polycarbonate.

856649 (37106) Faceshield Kit 856654 (37107) Replacement Visor

3M 1435 Ear Muff • This 3M Ear muff is safety orange in color. • It has a forked adjustable headband for fit and comfort. • The molded noise suppression inserts and ear cushions are replaceable.

856584 (1435)

3M Omega II Ratchet Suspension Hard Hat • White. • Ratchet suspension. • When properly used, this hard hat helps provide both safety and comfort. • Cushioned brow pad absorbs moisture to keep wearer cool and comfortable. • Six point woven nylon suspension.

856645 (76813)

3M Ear Plugs • Use to protect hearing from loud and constant noises generated by grinding, sanding, buffing, engine work and other marine operations. • Provide comfortable and effective noise reduction with the convenience of disposability. • Sold 200 pairs per box.

856596 (1100)

3M 3” Diameter Hookit™

3M 3” Diameter Clean Sand™ Discs • Patented multi-hole design captures and removes more dust. • Excellent for dry sanding applications like Gel Coat, Composites, Wood, Paint Prep and Primer sanding. • Design doesn’t require alignment of holes with the disc pad. • Simpler to use than a standard “dust free” system. • Fits all dustless sanding systems. • Constructed on a C Weight paper backing with aluminum oxide.

3M 3” Clean Sand™ Low Profile Disc Pads • For use with 3” diameter Hookit Clean Sanding discs. • Use with random orbital sanders with 1/4 - 20 internal threads. • Made with Red Foam.

853164 (20350) 3” Hookit Pad - Medium 853178 (05771) 3” Hookit Interface Pad - Dust Free

887025 (20815) P220 Grade 50 Discs Per Roll 887027 (20817) P320 Grade 50 Discs Per Roll 887028 (20818) P400 Grade 50 Discs Per Roll

ABRASIVES

3M 5” Diameter Hookit™

3M 5” Diameter Clean Sand™ Discs

3M 5” Diameter Imperial Hookit™ Discs

• Patented multi-hole design captures and removes more dust. • Excellent for dry sanding applications like Gel Coat, Composites, Wood, Paint Prep and Primer sanding. • Design doesn’t require alignment of holes with the disc pad. • Simpler to use than a standard “dust free” system. • Fits all dustless sanding systems. • Constructed on a C Weight paper backing with aluminum oxide.

• This uniquely blended mineral construction and tough “E” weight backing provides for a fast cutting, longer lasting abrasive. • Excellent for stripping paint or sanding marine fairing compounds.

887031 887033 887035 887036 887038 887039

(01693) (01695) (01697) (01698) (01701) (01702)

P80 Grade P120 Grade P180 Grade P220 Grade P320 Grade P400 Grade

50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll

886094 886082 886070 886068

(01730) (01729) (01770) (01728)

P36E Grade P40E Grade P60E Grade P80E Grade

25 Discs Per Roll 25 Discs Per Roll 25 Discs Per Roll 25 Discs Per Roll

3M 5” Clean Sand™ Disc Pads • Firm Sanding Pad. Most aggressive sanding for flat sanding operations. • Soft Sanding Pad. Low profile - Soft foam offers the best finishing of three styles. Can be used on flat or contoured surfaces. • Medium Sanding Pad. Standard profile - general purpose. 45° tapered edge provides flexibility. Allows the sanded area to be “feather edged” or more easily blended.

853166 853168 853170 853180

(20353) (20206) (20290) (20278)

5” Hookit Pad - Firm 5” Hookit Pad - Medium 5” Hookit Pad - Soft 5” Hookit Interface Pad - Soft

3M 6” Diameter Hookit™

3M 6” Diameter Clean Sand™ Discs

3M 6” Clean Sand™ Disc Pads

• Firm Sanding Pad. Most aggressive sanding for flat sanding operations. • Medium Sanding Pad. Standard profile - general purpose. 45° tapered edge provides flexibility. Allows the sanded area to be “feather edged” or more easily blended.

(20749) (20751) (20753) (20754) (20756) (20757)

P80 Grade P120 Grade P180 Grade P220 Grade P320 Grade P400 Grade

50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll

(05856) (20356) (20425) (05774)

6” Hookit Pad - Firm 6” Hookit Pad - Medium 6” Hookit Pad - Soft 6” Hookit Interface Pad

ABRASIVES

887045 887047 887049 887050 887052 887053

853172 853174 853176 853182

3M 6” Diameter Purple Clean Sand™ Discs • Disc with precise hole design for improved life and dust extraction. • Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal.

887060 887062 887064 887066 887068 887070

(01820) (01818) (01816) (01815) (01812) (01811)

P80 Grade P120 Grade P180 Grade P220 Grade P320 Grade P400 Grade

50 Discs Per Box 50 Discs Per Box 50 Discs Per Box 50 Discs Per Box 50 Discs Per Box 50 Discs Per Box

3M 8” Diameter Hookit™

3M 8” Hookit™ Disc Backup Pad

3M 8” Diameter Imperial Hookit™ Discs

• This uniquely blended mineral construction and tough “E” weight backing provides for a fast cutting, longer lasting abrasive.

854097 (05768) 8” Hookit Pad - Soft

886133 886121 886119 886107

• Excellent for stripping paint or sanding marine fairing compounds.

(01745) (01744) (01768) (01743)

P36E Grade P40E Grade P60E Grade P80E Grade

25 Discs Per Roll 25 Discs Per Roll 25 Discs Per Roll 25 Discs Per Roll

3M 5” Diameter Stikit™

3M 5” Diameter Stikit™ Gold Disc Rolls • A strong “C” weight backing provides excellent support for a tough and durable aluminum oxide mineral. • The non-staining Fre-Cut resists loading and the pressure sensitive adhesive coating ensures excellent adhesion to Stikit disc pads. • Excellent for gelcoat, wood and plastic applications.

886361 886385 886388 886397 886398

(86488) (86490) (86493) (86495) (86496)

P80 Grade P120 Grade P220 Grade P320 Grade P400 Grade

100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll

3M 5” Diameter Green Corps Stikit™ Production Resin Bond Discs • An all new mineral/bond construction and tough E weight backing provide for a fast cutting, long lasting abrasive disc. • Excellent for coarse sanding of hull and deck areas. • Individually linered.

852979 (01545) 40E Grade

100 Discs Per Box

3M 5” Stikit™ Dust-Free Disc Pads ABRASIVES

• Firm Sanding Pad. Most aggressive sanding for flat sanding operations. • Soft Sanding Pad. Low profile - Soft foam offers the best finishing of three styles. Can be used on flat or contoured surfaces. • Medium Sanding Pad. Standard profile - general purpose. 45° tapered edge provides flexibility. Allows the sanded area to be “feather edged” or more easily blended.

853205 (05655) 5” Stikit Pad - Firm Low Profile 853206 (45217) 5” Stikit Pad - Medium 853207 (05645) 5” Stikit Pad - Soft Low Profile

3M 6” Diameter Stikit™

• Designed for use in scuff sanding before painting, as well as to remove runs, dust nibs and excess orange peel from paint and gelcoat prior to compounding. • Individually lined and constructed of a high performance, aluminum oxide mineral bonded to a smooth film backing. • Cuts fast, lasts long, resists loading and leaves a consistent finish.

852637 852636 852635 852634

(01321) (01320) (01319) (01318)

P600 Grade 100 Discs Per Roll P800 Grade 100 Discs Per Roll P1000 Grade 100 Discs Per Roll P1200 Grade 100 Discs Per Roll

3M 6” Diameter Stikit™ Gold Disc Rolls • A strong “C” weight backing provides excellent support for a tough and durable aluminum oxide mineral. • The non-staining Fre-Cut resists loading and the pressure sensitive adhesive coating ensures excellent adhesion to Stikit disc pads. • Excellent for gelcoat, wood and plastic applications.

852841 852839 852827 852815 852803 852790 852764 852776 852788

(86468) (86469) (86470) (86471) (86472) (86473) (86475) (86476) (86477)

P80 Grade P100 Grade P120 Grade P150 Grade P180 Grade P220 Grade P320 Grade P400 Grade P500 Grade

100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll 100 Discs Per Roll

TAPES

3M 6” Diameter Stikit™ Finishing Film Discs

3M 6” Diameter Stikit™ Imperial Resin Bond Disc Rolls • A tough and durable aluminum oxide mineral bonded with a full heat resistant resin to a strong F weight backing. • The backing provides excellent shelling and tear resistance. • Excellent for scratch refinement after coarse sanding.

852930 (21794) 60F Grade 100 Discs Per Roll 852928 (21793) 80F Grade 100 Discs Per Roll 852924 (21791) P120F Grade 100 Discs Per Roll

3M 6” Diameter Green Corps Stikit™ Production Resin Bond Discs • An all new mineral/bond construction and tough E weight backing provide for a fast cutting, long lasting abrasive disc. • Excellent for coarse sanding of hull and deck areas. • Individually linered.

852992 (01548) 36E Grade 852980 (01547) 40E Grade

100 Discs Per Roll 100 Discs Per Roll

3M 6” Diameter Stikit™ Disc Pads • Standard 6 hole pattern for dust free sanding. • A thinner low profile pad provides better support for block sanding. • Max 10,000 RPM.

853208 (05656) 6” Stikit Pad - Firm Low Profile 853209 (45218) 6” Stikit Pad - Medium 853210 (05646) 6” Stikit Pad - Soft Low Profile

3M 8” Diameter Stikit™

3M 8” Diameter Stikit™ Production Fre-Cut Disc Rolls

3M 8” Diameter Stikit™ Imperial Resin Bond Paper Disc Rolls

853057 853019 853007 853071 853021

852916 (21788) 60F Grade 50 Discs Per Roll 852905 (21787) 80F Grade 50 Discs Per Roll 852891 (21785) P120F Grade 50 Discs Per Roll

(01552) (01551) (01550) (01556) (01549)

24E Grade 36E Grade 40E Grade 60E Grade 80D Grade

20 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll 50 Discs Per Roll

3M 8” Stikit™ Disc Backup Pads ABRASIVES

853211 (05579) 8” Stikit Pad - Medium 853215 (05568) 8” Stikit Pad - Soft

3M Orbital Sanders

3M Self-Generated Vacuum Random Orbital Sanders

3M Air Tool Lubricant for Orbital Sanders

• Pneumatic. • Designed to work with 3M’s self-contained dust collection system. • Consistent sand scratch for a better finish. • Trap and contain airborne particles during the finishing process. • Very smooth, fingertip control. • Can also be used with conventional filter bags. • Includes Clean Sanding Hookit Pad.

• Use to keep pneumatic air tools running efficiently. • Can also be used in air compressors. • Reduces friction coefficient between moving parts. • Reduces the amount of heat produced by the motor.

886804 (20319) 5” 886905 (20327) 6”

3M Clean Sanding Filter Bag and Adapter for Orbital Sanders

886917 (20451) 4 oz.

• • • •

Use for collecting dust when using SGV sanders. Eliminates the need for cumbersome vacuum hoses. Non-woven, electrically charged bag holds dust. Disposable.

886929 (20452) Filter Bag - Large 886931 (20453) Filter Bag Adapter

3M Grinding Discs

3M Green Corps Roloc Discs

3M Type D Discs - 280C

• Combines the versatility of the Roloc disc system with the premium quality of 3M Green Corps construction. • It is a handy quick change tool for disc grinding which fits any standard 1/4" drill or air tool. • A quick 1/2 turn on, 1/2 turn off speeds disc changing and cuts down time. • These discs are color coded. • Sold 25 discs per box.

• These are dependable open coated, heavy duty, aluminum oxide fiber backed discs. • Excellent for fiberglass grinding. • Sold 25 discs per box.

853085 853083 853095 853108

(01397) (01406) (01407) (01408)

36YF Grade 50YF Grade 36YF Grade 24YF Grade

854845 (01833) 36D Grade 854857 (01834) 24D Grade 854869 (01835) 16D Grade

7” x 7/8” 7” x 7/8” 7” x 7/8”

Diameter 2” Diameter 3” Diameter 3” Diameter 3”

ABRASIVES

3M Green Corps Cut-Off Wheels • It is a high-performance, longlasting cut-off wheel for use in cutting sheet metal, aluminum, stainless steel tubing, propeller shafts, clamps and rusted bolts. • Sold 5 wheels per pack.

854958 (01989) Dimensions: 3” x 1/32” x 3/8” 854959 (01990) Dimensions: 2” x 1/16” x 3/8”

3M Surface Conditioning Discs

3M Roloc Disc Pad Assembly • This hard rubber back up provides firm support for ScotchBrite Roloc Surface Conditioning Discs and 3M Roloc Bristle Discs. • Sold 10 per case.

853111 (05539) Diameter 2” 853110 (05540) Diameter 3”

3M Scotch-Brite Roloc Surface Conditioning Discs • Sold 25 discs per box.

855105 855106 853080 853081

(07480) (07481) (07485) (07486)

Coarse Medium Coarse Medium

Diameter 2” Diameter 2” Diameter 3” Diameter 3”

3M Fibre Discs

3M Green Corps Fibre Discs - 5” x 7/8”

3M Green Corps Fibre Discs - 7” x 7/8”

854776 (01914) 36G Grade 854778 (01915) 24G Grade

854821 (01922) 36G Grade

20 Discs Per Box 20 Discs Per Box

20 Discs Per Box

3M Abrasive Sheets

ABRASIVES

3M Stikit Gold Sheet Rolls - 216U

• Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing for quick adhesion to and easy removal from 3M Stikit Blocks. • 2-3/4" width.

• Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing for quick adhesion to and easy removal from 3M Stikit Finish Sander Conversion Pads. • 4-1/2" width.

852560 852561 852563 852564 852565 852566 852568

(02590) (02591) (02594) (02595) (02596) (02597) (02599)

P400 Grade P320 Grade P220 Grade P180 Grade P150 Grade P120 Grade P80 Grade

45 Yards 45 Yards 45 Yards 45 Yards 45 Yards 30 Yards 25 Yards

886311 (02691) P320 Grade 886323 (02693) P220 Grade 886347 (02696) P120 Grade

25 Yards 25 Yards 20 Yards

3M Stikit Soft Hand Block 3M Stikit Hand File Board • It is a well-balanced, durable tool that is resistant to most solvents, has a sturdy design that provides a non-twisting, flat sanding surface. • This file board has an embossed rubber face that allows adhesion release when used with 3M 2-3/4" x 16-1/2" sheets. • Can be cleaned with lacquer thinner.

853615 (05444)

• Made of a tough flexible foam which allows the user to block sand on flat surface or in contours. • Dimensions: 2-3/4” x 5”.

854744 (05442)

3M Stikit Hand Block • Made of sturdy, durable, high strength material and are shaped to fit the hand comfortably. • These blocks have an embossed rubber face which allows good adhesion for 3M Stikit Sheet Rolls. • Dimensions: 2-3/4” x 7-3/4”.

854756 (05441)

3M Sandpaper Sheets

3M Imperial Wetordry Paper Sheets

3M Tri-M-ite Fre-Cut Paper Sheets

• Use wet or dry for sanding old finishes, fine featheredging plus surface work. • It is a silicon carbide, closed coat product bonded with a waterproof resin. • Dimensions: 9” x 11”. • Sold 50 sheets per sleeve.

• Dry sanding only by machine or hand. • A specially treated paper with sharp silicon carbide mineral resists loading when working on wood, plastic or fiberglass. • Dimensions: 9" x 11". • A weight.

854180 (02020) 2000 Grade 854202 (02033) 1200 Grade 854204 (02034) 1000 Grade

854516 854528 854530 854554 854578

(02344) (02347) (02348) (14177) (02352)

320A Grade 220A Grade 180A Grade 120A Grade 80A Grade

100 Sheets 100 Sheets 100 Sheets 100 Sheets 50 Sheets

ABRASIVES

3M Imperial Wetordry Paper Sheets • Dimensions: 5-1/2” x 9”. • Sold 50 sheets per sleeve.

854186 854198 854201 854200

(02021) (02022) (02023) (02044)

1000 Grade 1200 Grade 1500 Grade 2000 Grade

3M Production Paper Sheets • Dry sanding only by machine or hand on wood, fiberglass or metal. • Open coat with tough aluminum oxide mineral. • Dimensions: 9” x 11”. • D weight. • Sold 100 sheets per sleeve.

854390 (02115) 80D Grade 854403 (02116) 60D Grade 854427 (02118) 40D Grade

3M Wetordry Tri-M-ite Paper Sheets • Use wet or dry for sanding old finishes, fine featheredging plus surface work. • It is a silicon carbide, closed coat product bonded with a waterproof resin. • Dimensions: 9" x 11". • Sold 50 sheets per sleeve.

854124 854148 854150 854162 854174 854225 854237 854251 854275

(02014) (02016) (02017) (02018) (02019) (02000) (02002) (02004) (02007)

180C Grade 120C Grade 100C Grade 80C Grade 60C Grade 600A Grade 400A Grade 320A Grade 220A Grade

C Weight C Weight C Weight C Weight C Weight A Weight A Weight A Weight A Weight

3M Hand Sanding Block • A pliable rubber block which holds the sandpaper securely during wet or dry sanding operations. • It utilizes a 2-3/4" x 9" sheet.

854732 (05519)

Milwaukee Wire Brushes

Milwaukee Stringer Bead Twist Wheel Wire Brush

Milwaukee Knot Style Cup Wire Brush

• This “Mini” stringer bead brush is unexcelled for stringer bead weld cleaning and other applications where a narrow (3/16") brush face is necessary to achieve the work. • Diameter 4". • Wire size .020. • Trim length 3/4". • Face width 3/16". • Arbor hole 5/8 - 11.

221147 (23610)

221111 (20160)

Milwaukee Full Cable Twist Carbon and S/S Wire - Single Row

Milwaukee Standard Twist Carbon Steel Wire Brush - Single Row ABRASIVES

• Made with crimped tempered wire these brushes provide fast cutting action for the removal of light encrustations of scale, rust, paint or weld spatter. • Arbor hole 5/8 - 11.

221123 (20103) Diameter 4” 221135 (20107) Diameter 6”

• Carbon steel wire. • 12,500 RPM MSFS. • Use these rugged brushes for cleaning welds and for operating in tight places such as corners, angle welds and T-connections. • Diameter 2-3/4". • Wire size .020. • Trim length 7/8". • Arbor hole 5/8 - 11.

Trim Length 1-3/8” Trim Length 1-1/2”

• Each individual knot contains the same number of topquality, high carbon tempered steel or 302 stainless steel wires that give the wheel precise balance and long life. • Diameter 6". • Approx. face width 1/2". • Trim length 1-1/4". • 10,000 RPM MSFS. • Arbor hole 5/8 - 11.

221159 (02294)

Work Gloves

PVC Chemical Gloves

Leather Palm Gloves

• Mens 10" PVC coated, smooth finish, cotton interlock lined. • Color: Black.

• Select shoulder leather. • 2-1/2" rubberized safety cuff. • Size: Large.

412101 (810RB)

412107 (2100B) • Mens 10 oz. cotton canvas plastic dot gloves. • Knit wrist.

412116 (PD2050)

Island Trading Top Cow Hide Leather Wing Thumb Unlined Driver Gloves 64

412108 (Y10) 412109 (Y10)

Large X Large

Boat Waxes - Liquid

Marpro Premium Marine Wax • • • •

Ideal for new or restored fiberglass and painted surfaces. Special polymers repel stains and UV rays. Provides long-lasting protection and high gloss. Easy to apply; No hard buffing needed.

7-2734 16 fl. oz.

Meguiar’s Flagship Premium Wash-N-Wax

NEW

• Wash and Wax in one quick easy step. • Exclusive blend of carnauba and synthetic polymer technology. • Biodegradable.

628520 (M4232) 32 fl. oz.

Meguiar’s Boat/RV Pure Wax

628430 (M5616) 16 fl. oz.

Meguiar’s Flagship Premium Marine Wax • • • •

Dramatically enriches color and shine. Adds tough, long-lasting protection. Removes light oxidation and dullness. Protects gelcoat from UV damage.

CLEANING PRODUCTS

• Durable high gloss protection for fiberglass and all painted surfaces. • Blend of pure Brazilian carnauba wax with silicones, polymers and resins to maintain extraordinary gloss and protection. • Protects against the sun’s ultraviolet rays.

628454 (M6316) 16 fl. oz. 628456 (M6332) 32 fl. oz.

Meguiar’s High Gloss Polish • Restores optimal gloss on gel coat and painted marine or RV surfaces after cleaning. • Restores valuable oils to feed and nourish the surface. • Especially effective on dark colors.

628365 (M4516) 16 fl. oz.

3M Marine Scotchgard Liquid Wax • Designed for the harsh marine environment and provides protection from the suns damaging ultraviolet rays. • Safe for use on fiberglass, gelcoat, marine topside paints and marine metals.

857375 (09061) 500 ML 857376 (09062) 1 Liter

Boat Waxes - Liquid

Star Brite Marine Polish • • • •

Lasts up to 4 times longer than other polishes. Equally good for new and older boats. No hard rubbing required. Helps stop fading from UV rays.

625080 (80116) 16 fl. oz.

Star Brite Premium Marine Polish with PTEF • The ultimate protection for fiberglass, metal and painted surfaces, lasts up to 6 times longer than other marine waxes. • UV inhibitors help stop fading and oxidation.

625181 (85716) 16 fl. oz. 625218 (85732) 32 fl. oz.

Farecla Ultimate UV Wax

RejeX

• Premium quality wax. • Superb high gloss finish. • Quick & easy to apply & remove.

• A thin-film polymer coating designed to provide a highrelease surface. • This very thin film prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc.

812140 (FM-UVW-500) 500 ml CLEANING PRODUCTS

NEW

302947 (61002) 12 fl. oz.

Farecla Profile UV Wax • Contains UV absorbers that slow the effects of ageing. • High Carnauba wax content resists washing off. • Laboratory tested – QUV and Xenon arc accelerated weather testing conducted according to BS EN ISO 4892 and ASTM D5894.

812152 (10040) Liter

NEW

Marpro Cleaning Kit • Quick and convenient, the Marpro Cleaning Kit includes: 7-2732 Premium Wash and Wax, 7-2734 Tough Guy Wax, 7-2738 Spray Fast Wax and a bucket with a sponge.

7-2745

Spray Waxes

Marpro Spray Fast Wax

3M Marine Clean and Shine Wax

• Just spray and wipe to add a sparkling high performance wax! • Perfect for touchups. • A quick and easy wet or dry application. • Perfect for use on fiberglass, all painted surfaces and stainless steel. • Do not use on glass windows.

• Excellent for use on wet or dry surfaces; no water needed! • May also be used to enhance the shine of your boats fiberglass gelcoat, marine topside paint, painted aluminum or metal parts.

7-2738 16 fl. oz.

857373 (09033) 15 fl. oz.

Meguiar’s Quick Spray Wax

Star Brite Marine Formula Spray Wax

• Provides incredible gloss with light wax protection, quickly and easily. • Perfect for use on fiberglass, painted surfaces (including painted aluminum), stainless steel, clear plastic and other non-porous surfaces.

• • • •

Protects against salt, sun and weathering. Convenient spray application. Long lasting. For fiberglass, metal and painted surfaces.

625042 (82422) 22 fl. oz.

CLEANING PRODUCTS

628442 (M5916) 16 fl. oz.

Boat Waxes - Paste

3M Marine Protective Wax • Designed to provide high gloss and protect fiberglass/gelcoat, marine topside paints, painted aluminum and marine metal parts.

857358 (09030) 9.5 oz.

Star Brite Presoftened Boat Wax • Easy to use presoftened wax formula, provides a deep, rich shine. • Long lasting protection against fading, chalking and oxidation. • Use on fiberglass, aluminum, chrome & on painted surfaces.

625028 (82314) 14 oz.

CRC Marine Cleaner Wax 216742 (MK8216) 16 oz.

CRC Trewax Boat Paste Wax • Contains Carnauba. • Use on fiberglass, painted surfaces, aluminum, chrome, stainless steel.

216716 (MK66) 12 oz.

Meguiar’s Maximum Mold Release Wax • The industry's first and still most widely used mold release wax. • Wax of choice when maximum release power is required. • Excellent for breaking in new molds and tooling.

628290 (M0811) 11 oz.

Color Restorers

Marpro Liquid Rubbing Compound & Color Restorer

Marpro One-Step Cleaner Wax

• Ideal for restoring severely oxidized/faded hulls. • Removes light scratches and scuff marks. • Prepares hull for polish/waxing.

• Ideal for removing light to medium oxidation. • Cleans and restores lightly faded fiberglass and painted surfaces • Special polymers protect against future fading and staining.

7-2740 16 fl. oz.

7-2736 16 fl. oz.

Star Brite Fiberglass Color Restorer

Star Brite Premium Cleaner Wax with PTEF

• Brings back original color and lustre. • Will not scratch or harm gelcoat. • Removes heavy oxidation, chalking and fading. • Seals surface to protect against future fading and weathering.

• Unique formula cleans and restores fiberglass, metal and painted surfaces and leaves a protective coating, all in one step. • Wipe on and buff off to remove oxidation, chalk and fading from dull fiberglass surfaces. • Leaves a polymer coating with UV inhibitors to maintain restored finish. • Easy-to-apply liquid formula.

624886 (81816) 16 fl. oz.

CLEANING PRODUCTS

Meguiar’s One Step Cleaner Wax • A non-abrasive formula that cleans, polishes and protects all boats and RV's in one easy step. • Removes light oxidation and haze, minor scratches and swirls. • Provides long-lasting protection against salt air, corrosion and the sun's ultraviolet rays.

628391 (M5001) Gallon

625220 (89616) 16 fl. oz.

Meguiar’s One Step Boat Cleaner/Wax • A non-abrasive formula that cleans, polishes and protects all boats in one easy step. • Removes light oxidation and haze, minor scratches and swirls. • Provides long-lasting protection against salt air, corrosion and the sun’s ultraviolet rays.

Meguiar’s Color Restorer

628404 (M5016) 16 fl. oz. 628428 (M5032) 32 fl. oz.

• Safely removes moderate oxidation, stains and blemishes on all fiberglass and painted surfaces. • Revives faded, oxidized surfaces to their original vibrant color.

Meguiar’s One Step Compound

628353 (M4416) 16 fl. oz.

• This aggressive, yet safe, one-step compound will clean and restore gloss to the gel coat surface in one step. • Removes moderate-heavy oxidation, scratches, stains and tough water spots on all fiberglass and painted gel coat marine or RV surfaces.

628381 (M6732) 32 fl. oz.

Color Restorers

3M Marine “One Step” Fiberglass Cleaner & Wax

3M Marine “One Step” Fiberglass Restorer & Wax

• Designed to remove light to medium oxidation, clean, polish and protect fiberglass/gelcoat and marine topside paints.

• Designed to remove heavy oxidation, chalking, fading, minor scratches, rust and exhaust stains. • Provide protection on fiberglass/gelcoat and marine topside paints.

857233 (09009) 16 fl. oz. 857245 (09010) 32 fl. oz. 857257 (09011) Gallon

857168 (09005) 16 fl. oz. 857182 (09006) 32 fl. oz. 857194 (09007) Gallon

3M Marine Color/Gloss Restorer • Resurrect the gloss in your boat's gelcoat with this compound/polish that combines an exceptionally fast cutting compound with a finishing material in one. • It removes light to heavy oxidation, scratches, stains, blemishes, and fine swirl marks. CLEANING PRODUCTS

857260 (09089) 500 ML

Oxidation Removal

Meguiar’s Heavy Duty Oxidation Remover

Meguiar’s Fiberglass Restoration System

• Removes heavy oxidation, scratches, stains and tough water spots on all fiberglass and painted surfaces. • Restores color by effectively removing surface degradation.

• A three-step system developed to restore the original look of faded or damaged fiberglass gel coat surfaces. • 1. No. 49 Oxidation Remover will remove oxidation, stains, and scratches. • 2. No. 45 Polish will restore brilliant gloss to the finish. • 3. No. 56 Pure Wax will provide long-lasting, durable protection to the restored surface.

628377 (M4916) 16 fl. oz.

628379 (M4965)

Rubbing Compounds

Star Brite Paste Rubbing Compound for Medium Oxidation

Star Brite Liquid Rubbing Compound for Medium Oxidation

• For fiberglass, metal and painted surfaces. • Removes stains, medium oxidation and scratches.

• Removes stains, medium oxidation and scratches. • For fiberglass, metal and painted surfaces.

624949 (82614) 14 oz.

624925 (81316) 16 fl. oz.

3M Perfect-It II Extra Cut Rubbing Compound • Designed for Automotive Paint Systems. • It has all the features, advantages and benefits of Perfect-It III Rubbing Compound with increased aggressiveness to remove 1000 - 1200 scratches.

856964 (06060) Quart

3M Imperial Compound and Finishing Material • It has a fast cut and leaves an excellent finish without swirl marks. • Designed to remove a P600 or P800 dual action sand scratch from gelcoat, with a wool pad.

CLEANING PRODUCTS

856899 (06044) 32 fl. oz.

3M Marine Finesse-It Paste Compound • Designed for aggressive compounding of gelcoated fiberglass surfaces. • This product is well suited for boat reconditioning of heavily oxidized surfaces/finishes.

856926 (06039) Gallon

3M Marine Super Duty Rubbing Compound • • • •

For fiberglass and painted boats. Fast cut formula. Contains no wax and silicone. Removes scratches and heavy oxidation.

857175 (09004) Pint

3M Finesse-It II Finishing Material • Designed for use on topside paint systems to remove swirl marks after compounding, while leaving a glazed finish. • Contains no silicone or wax.

857176 (09048) Pint 856952 (05928) Quart

Rubbing Compounds

3M Imperial Microfinishing Compound

3M Super Duty Rubbing Compound

• It is specially formulated medium cut compound recommended for removing grade microfine 1200, 1500 and 2000 sand scratches in marine paints.

• Recommended for heavy aggressive compounding of oxidized gelcoat and marine paint. • Contains no silicone. • Buffs to a high gloss.

856887 (06011) Quart

856863 (05954) Quart 856875 (05955) Gallon

• Great for removing swirl marks. • Excellent 2nd step product - to be used after either Profile 100, 200 or 300. • Achieves a high gloss finish, especially on darker colours. • Quick and economical. • No fillers.

812138 (00041) Liter

NEW

3M Marine High Gloss Gelcoat Compound • Designed to quickly remove P600 dual action or 1000 wet sanding scratches from production gelcoat. • This compound contains no wax or silicone and leaves a high gloss finish without swirl/wheel marks. • It has a unique formulation which reduces slinging while buffing.

CLEANING PRODUCTS

Farecla Profile 500 Liquid

856890 (06025) Gallon

Farecla Profile 200 Paste • Coarse cut - removes up to P800 dry. • Paste is ideal in a two-step process with Profile 500. • Quick and economical. • No fillers.

812102 (57007) Gallon

NEW

Farecla Profile 300 Liquid • Rapid cutting - removes up to P1000 dry. • Can be used as a single step process, achieves an excellent gloss level. • Universal application - extremely versatile, will remove marks on virtually any surface. • Quick and economical. • No fillers.

NEW

812114 (81007) Gallon 812126 (81009) Liter

Boat Washes and Soap

Marpro Boat Wash • Cleans all marine surfaces. • Heavy duty formula quickly removes dirt, grime, fish blood and more. • Ideal for cleaning fiberglass, vinyl, metal, rubber, plastic and painted surfaces.

Marpro Premium Wash & Wax • For all marine surfaces. • Cleans amd waxes in one step. • Protects against UV rays weathering.

7-1092 32 oz. 7-1093 Gallon 4 Per Case

7-2732 32 fl. oz.

Star Brite Boat Wash in a Bottle

Star Brite Sea Safe Wash and Wax

• Leaves hulls, decks, chrome and fittings sparkling. • Biodegradable. • Nonstreaking, does not leave residue. • Liquid.

• Biodegradable formula cleans, shines and leaves a protective coating all in one step. • Cleans, shines and protects in one easy step. • Concentrated for economical use. • Excellent for use on fiberglass, metal and painted surfaces.

624800 (80416) 16 fl. oz.

CLEANING PRODUCTS

Star Brite Super Green Heavy Duty Cleaner • Super cleaner whisks away dirt, grease and oil, is safe, does not contain acids, alkalies or other harsh chemicals. • Biodegradable formula.

625390 (91622) 22 fl. oz.

Star Brite Power Pine Boat Wash and Wax • Concentrated formula makes 96 gallons (32 fl. oz. size) or 384 gallons (1 gallon size). • Environmentally safe, biodegradable. • Use to clean, shine and protect all fiberglass, painted surfaces, glass, plastic and metals. • Liquid.

625691 (94732) 625692 (94700)

32 fl. oz. Gallon

624790 (89737) 32 fl. oz.

Star Brite Sea Safe Boat Wash • Cleans away dirt, stains, grease, oil and salt. • Use on fiberglass, metal, glass, rubber and painted surfaces. • Biodegradable formula. • Liquid.

624802 (89732) 32 fl. oz.

Star Brite Power Pine Boat Wash • Concentrated formula makes 96 gallons (32 fl. oz. size) or 384 gallons (1 gallon size). • Dissolves in fresh or salt water. • Environmentally safe, biodegradable. • Cleans fiberglass, painted surfaces, fish boxes, windows, canvas, rugs, etc. • Liquid.

625690 (93732) 32 fl. oz. 625689 (93700) Gallon

and

Boat Washes and Soap

Meguiar’s Quick Clean Marine

Meguiar’s Boat/RV Gel Wash

• Quickly and safely removes fresh water spots, mineral deposits, salt spray, boat scum and other fresh contaminants. • Easy spray and wipe maintains your boat’s high gloss finish between washings.

• Biodegradable wash lifts boat scum, dirt, salt spray, grime, bird droppings and other fresh contaminants. • Does not strip wax. • Conditioners in wash increase shine and slickness. • Sheeting action greatly reduces drying time.

628492 (M5216) 16 fl. oz.

628517 (M5416) 16 fl. oz.

CRC Super Suds Boat Soap

3M Multipurpose Boat Soap

• A modern, synthetic detergent that contains no soaps. • It cleans by chemical action making cleaning easier. • It has been formulated for washing glassware, pots, pans and utensils.

216463 (MK2232) Quart 216475 (MK22128) Gallon

• Concentrated formula designed to clean anything from dirty decks to soiled fabrics to degreasing engines. • Mix concentrate with water for desired cleaning strength. • Cleans grease, oil, grime, algae, fish blood, dirt, etc. on hulls, decks, upholstery, canvas, carpet and engines. • Liquid.

857396 (09034) 16 fl. oz.

Marpro Spider & Bird Stain Remover

Rust Free Rust and Stain Remover

• Non-toxic, natural formula. • Quickly dissolves Spider and Bird Droppings! • Won’t remove polish or wax. • Safe around kids and pets. • Biodegradable phosphate-free formula.

• Removes rust from any surface: Steel, cast iron, stainless, fiberglass, chrome, tile, porcelain, concrete, vinyl and cloth.

7-2724 32 fl. oz.

Star Brite Rust Stain Remover • No rubbing or scrubbing required. • Safe for use on fiberglass, metal and painted surfaces. • Removes rust drip stains and sprinkler rust deposits.

625680 (89222) 22 fl. oz.

CLEANING PRODUCTS

Fiberglass Stain Removers

290736 (RF0008) 8 fl. oz.

Davis FSR - Fiberglass Stain Remover 323458 (790) 16 fl. oz. 323460 (792) 67.8 fl. oz.

Toon-Brite Fiberglass Boat Cleaner • 1/2 gallon concentrate.

371849 (F1000)

Canvas Cleaners

Marpro Canvas Protector • Excellent oil and water repellency. • Excellent resistance to oil and watery stains. • Provides maximum UV protection.

6-4080 10 fl. oz.

Mary Kate Canvas and Fabric Cleaner

NEW

Star Brite Sail and Canvas Cleaner • • • • • • •

Biodegradable. Cleans and brightens whites and colors. Concentrated formula. Removes dirt, grease and mildew stains. Great for boat covers, bimini tops and sails. Does not weaken fabric or thread. Equally good for nylon or dacron sails.

626525 (82016) 16 fl. oz.

Star Brite Waterproofing

• Removes dirt and stains. • Restores original colors of bimini tops, boat and seat covers, more. • Excellent results on marine grade fabrics Sunbrella, Sharkskin and other acrylic, synthetic, polyester and vinyl marine fabrics. • Color safe, won't cause fading.

216680 (MK4132) 32 fl. oz.

• Top rated waterproofing. • Helps prevent rot and mildew. • For boat covers, bimini tops, sail covers, clothing and tents. • Does not change color or feel of fabric. • Safe for all fabrics including Sunbrella.

626513 (81922) 626518 (81900N)

22 fl. oz. Gallon

CLEANING PRODUCTS

Rug and Fabric Cleaners

Fabric Guard • Powerful enough to protect fabrics in the harshest environment ... outdoors. • Yet it is safe for the finest fabrics, wool, silk, and fine leathers - including suede.

437447 (30616) 16 fl. oz.

303 Rug and Upholstery Cleaner and Spot Remover • • • • •

Amazing colloidal cleaner. Non-toxic. Biodegradable. Rinses residue-free. Non-flammable.

437459 (30551) 32 fl. oz.

Mary Kate Carpet Stain and Spot Remover

NEW

• Contains no ozone-depleting ingredients. • Odor-free formula. • Penetrates fibers to break up and lift out even the toughest soils and stains - food, wine, grease, fish blood, cosmetics, ink, and more. • Color safe, contains no ammonia or bleach.

216682 (MK4232) 32 fl. oz.

Star Brite Stain-Buster Rug Cleaner • Removes oil, grease, pet stains, odors. • Safe for all types of carpet. • Does not leave carpet sticky or matted helps repel future staining. • Biodegradable.

625369 (88922) 22 fl. oz.

Black Streak Removers

Marpro Black Streak/Fish Blood Remover

Star Brite Black Streak Remover

• Instantly removes black streak caused by water run off. • Excellent for removing fish blood deposits. • Safe for use on fiberglass, metal and painted surfaces. • Just spray on, let work and hose off.

• Instantly removes black streaks caused by water run off. • Safe for use on fiberglass, metal and painted surfaces. • Contains no harsh acids or alkalies. • Just spray on, let work and hose off. • Liquid.

7-1084 Gallon 7-1085 22 fl. oz.

628151 (71622) 22 fl. oz.

3M Black Streak Remover

CRC Black Streak Remover

• Designed to remove black streaks. • This product is safe for use on fiberglass, metal and painted surfaces.

• Quick, easy and effective. • Instantly removes black streaks caused by water run off on fiberglass. • Metal and painted surfaces. • Spray on/wipe off. • Commercial grade. • Works when others won't.

857380 (09047) 500 ml

CLEANING PRODUCTS

216728 (MK6732) Quart

Deck Cleaners

Marpro Deck Cleaner • Quickly and easily removes dirt, grime, fish blood and more from non-skid surfaces. • Special chelating agents break dirt and stains loose without hard scrubbing. • Formulated specifically for fiberglass, and painted surfaces.

Star Brite Non-Skid Deck Cleaner with PTEF • Cleans away ground-in dirt and stains. • Safe to use, contains no harsh chemicals. • Leaves a protective coating to repel dirt and stains.

625612 (85932) 32 fl. oz.

7-1094 32 oz. 7-1095 Gallon 4 Per Case

Star Brite Sea Safe Deck Cleaner

CRC Cleaning Detail Non-Skid Deck Cleaner

• Biodegradable formula cleans dirt and stains from non-skid decks and all fiberglass surfaces. • Leaves a non slippery protective coating to protect cleaned surfaces.

• This remarkable liquid crème cleaner quickly and easily removes stubborn stains, grease, grime, soil, soap scum, fish blood, oxidation, scuff marks, rain stains and diesel soot from a variety of surfaces.

216451 (MK2132) Quart

624792 (89739) 32 fl. oz.

3M Marine Non-Skid Deck Cleaner • Designed to clean hard to reach ground-in dirt and stains on non-skid decks. • Safe for use on fiberglass, metal and painted surfaces.

857390 1 Liter

Hull Cleaners

Marpro EZ On EZ Off Hull and Bottom Cleaner

Marpro Hull Cleaner • Quickly removes scum line and other tough stains. • Easy to use; wipe on, let work, rinse clean. • Specifically formulated for fiberglass and painted surfaces. • Ideal for removing rust and leaf stains.

• Removes tough stains, marine deposits and scum lines. • Safe for use on fiberglass, metal, wood and painted surfaces.

7-1089 Quart 7-1088 Gallon

7-1096 32 oz. 7-1097 Gallon 4 Per Case

Star Brite Instant Hull Cleaner • No rubbing required. • Removes stains from grassy marine growth, rust stains and scum line. • Excellent for use on fiberglass, metal and painted surfaces. • Biodegradable.

625650 (81732) 32 fl. oz.

12 Per Case 4 Per Case

Marykate On & Off Hull and Bottom Cleaner • Instantly removes waterline stains, algae stains, rust and gas exhaust stains. • Softens barnacle rings and zebra mussels for easy removal. • This product is biodegradable.

216425 (MK-2032) Quart 216437 (MK-20128) Gallon CLEANING PRODUCTS

Star Brite Boat Bottom Cleaner • Removes barnacles, zebra mussels, algae, scum line and rust quickly and easily. • Water based, environmentally friendly, biodegradable formula. • Will not harm fiberglass when used as directed.

625674 (92232) 625662 (92200)

Quart Gallon

Glass Cleaners

Permatex Quick Orange Multi-Purpose Glass Cleaner • It is a multi-purpose glass cleaner made with an original “no streak, no run orange-scented formula” that deodorizes and cleans window film immediately. • This fast-acting, professional strength glass cleaner can be used on a variety of surfaces including chrome, aluminum, stainless steel and enamel, to remove the toughest grease and dirt.

545193 (82544) 18.75 fl. oz.

Star Brite Rain View • Improves wet weather visibility through windshield and windows. • Use on glass and plastic. • Works with or without windshield wipers. • Makes surface so slick that rain and wet weather deposits literally slide off.

626549 (88708) 8 fl. oz.

All Purpose Cleaners

Marpro Formula 9

Spray Nine

• All purpose heavy duty cleaner and degreaser.

• Contains no chlorinated or petroleum solvents and is nonflammable, ready-to-use, nontoxic and harmless to normal skin and almost all hard surfaces.

7-1091 22 fl. oz. 12 Per Case 7-1090 Gallon 4 Per Case

Star Brite Easy Scrub • Cleans ground-in dirt and stains from fiberglass, metal, plastic, mica, tile and painted surfaces. • Excellent for cleaning stainless steel sinks. • Special heavy duty formula with mild abrasives. • Does not contain phosphates environmentally safe.

12 Per Case 6 Per Case

CRC Spray Away All Purpose Cleaner • A heavy duty, non-flammable all purpose cleaner. • It removes grease, dirt and grime. • Produces an excellent water based degreaser without petroleum solvents.

216540 (MK2832) Quart

16 fl. oz. CLEANING PRODUCTS

625383 (87516)

437056 32 fl. oz. 437068 Gallon

Bilge Cleaners

Marpro Bilge Cleaner • Removes sludge, grime and odors to clean and freshen bilge. • Heavy duty cleaning power. • Easy to use; pour into bilge and run boat. • Biodegradable formula won’t harm hoses or bilge pumps. • Will not harm fiberglass, metal, plastic or hoses.

7-1098 32 oz. 7-1099 Gallon 4 Per Case

CRC Big Bully Natural Orange Bilge Cleaner • • • •

Works fast to emulsify oil, grease and scum. It leaves bilge areas clean and fresh. Self cleaning commercial action. Boat's rolling action cleans out the bilge.

216487 (MK2332) Quart 216499 (MK23128) Gallon

Star Brite Heavy Duty Bilge Cleaner • Biodegradable. • Dissolves and eliminates oil, grease, gasoline, scum and sludge.

625686 (80532) 32 fl. oz.

Star Brite Power Pine Bilge Cleaner • Concentrated formula makes 96 gallons (32 fl. oz. size). • Dissolves in fresh or salt water. • Environmentally safe, biodegradable. • Cleans bilges easily and effectively.

625688 (93832) 32 fl. oz.

Star Brite Sea Safe Bilge Cleaner • Biodegradable formula dissolves oil, grease, sludge, and fuel and leaves bilge smelling fresh and clean. • Easy to use - just pour in, run boat and drain. • Leaves bilge smelling clean and fresh.

625681 (89736) 32 fl. oz.

Mildew Stain Removers

3M Marine Mildew Block

3M Marine Mildew Stain Remover

• Offers a unique solution in preventing unsightly mildew growth. • Safe to use on most marine surfaces and materials above the waterline, and can be used both indoors & outdoors. • Non-toxic formula helps keep surfaces looking newer and cleaner longer.

• Quickly removes mildew stains on vinyl, covers, cushions and other marine surfaces. • Follow-up with 3M Marine Mildew Block for long-lasting protection and to help keep surfaces looking cleaner and newer longer.

857156 (09065) 16.9 fl. oz.

857159 (09067) 16.9 fl. oz.

Star Brite Mildew Stain Remover

CRC Mildew Stain Remover • This viscous formula clings where it is sprayed removing mildew and mold stains, while reducing the odor and drippage normally associated with similar type products.

• Removes mildew stains on contact. • Use on vinyl covers, headliners, cushions, etc. • Simple spray on application.

216603 (MK3732) Quart

625559 (85616) 20 fl. oz.

CLEANING PRODUCTS

Dehumidifiers

MDR Damp Away Dehumidifier

MDR Damp Away Dehumidifier II

• Automatically removes moisture from the air for months. • Odorless. • Will absorb 17 times its own weight of water from the air.

• Damp Away II dehumidifier effectively helps eliminate mold and mildew by removing excessive moisture. • Odorless, non-corrosive, with no harsh chemicals emitted. • Individually sealed cloth bags (3 x 8 x 1). • Twin pack.

460792 (MDR-304) 32 oz.

460794 (MDR-306)

• Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out

• Works 24-7

Teak Care Products

• Seals and protects teak and other fine woods. • Oil penetrates deep into the wood for extra protection. • Contains ultraviolet absorbers to resist weathering. • Long lasting formula.

626169 (81616) 16 fl. oz. 626171 (81632) 32 fl. oz. 626183 (81600) Gallon

Meguiar’s Gold Teak Oil • Protects teak, rejuvenating the rich, natural golden wood colors. • Prevents drying out of wood from exposure to the elements. • Great for bulkheads, hatch covers, swim steps, grad rails and decking.

628466 (M4616) 16 fl. oz.

Meguiar’s Teak Cleaner • Cleans teak and other fine woods. • Does not contain acid - no neutralizers needed. • Removes stains and weathering. • Does not raise wood grain.

626044 (81416) 16 fl. oz. 626056 (81432) 32 fl. oz.

Star Brite Teak Care Kit • Everything needed to clean, restore and protect teak in one convenient package. • Each kit contains: (1) pint - Teak Cleaner, (1) pint - Teak Brightener and (1) pint - Teak Oil.

625953 (81216) Standard Pack 6 Kits

Star Brite Golden Premium Teak Oil • Extra long lasting protection for teak. • Gives teak a natural warm golden color. • Contains ultraviolet absorbers to resist weathering. • Lasts 4 to 6 times longer than standard teak oils.

626210 (85116) 16 fl. oz. 626222 (85132) 32 fl. oz. 626234 (85100) Gallon

Star Brite Teak Brightener • Brightens teak and other fine woods. • Highlights wood grain and enhances warm natural color. • No rubbing or scrubbing required.

626119 (81532) 32 fl. oz. CLEANING PRODUCTS

Star Brite Teak Oil

Te-Ka Cleaner • No more hard scrubbing! • Simply pour on Part A and B and hose off to original golden brown beauty of teak. • Deep cleans in a fraction of time. • Te-ka is a two part system.

660476 Quart Kit 660488 Half Gallon Kit

Snappy Teak-Nu • Removes all old sealers, soil, fish blood, rust stains, fuel and oil stains. • Kit contains: 1 quart of formula No. 1 and No. 2 and (2) plastic bristle brushes. • Note: Both No. 1 and No. 2 must be used.

437308 437311 437323 437335 437347

Kit No. 1 No. 2 No. 1 No. 2

Quart Quart Gallon Gallon

Metal Cleaners

Farecla Metal Cleaner • Mild abrasive cleaner & protector. • Removes oxidation, dirt and grime from all metal surfaces. • Clean shiny finish.

812164 (FM-MC-500) 500 ml

NEW

3M Marine “One Step” Aluminum Restorer and Polish • Designed to remove oxidation growth and stains and restore a lustrous appearance to bare aluminum. • Removes heavy oxidation and restores shine to most painted aluminum surfaces. • Paste.

857269 (09020) 18 oz.

3M Marine Metal Restorer and Polish • Restores and polishes stainless steel, brass, bronze, copper, chrome, aluminum and other marine metals by removing surface rust, oxidation, corrosion and tarnish.

857284 (09019) 18 oz. CLEANING PRODUCTS

Star Brite Chrome and Stainless Polish

Snee Aluminum Brightener and Fiberglass Cleaner • Aluminum brightener specifically selected acids and stable wetting agents designed to clean and brighten anything aluminum.

437010 (06 AB) Gallon

• Cleans and shines chrome and stainless steel surfaces. • Protects against pitting, discoloration, staining, rusting. • Resists salt and water spray.

625535 (82708) 8 fl. oz.

Nevr-Dull • “Magic” wadding polish for cleaning and polishing all metals. • Cleans brass, aluminum, steel, chrome and other metals. • Removes rust, tar and rubber sole marks.

Toon-Brite Pontoon and Aluminum Boat Cleaner

457526 5 oz.

371847 (B1000)

Meguiar’s Metal Polish

• Formulated to easily clean away stains, oxidation and surface degradation and polish to a mirror-bright shine in one easy step. • Anti-corrosive technology locks in the shine to all metal, including stainless steel and aluminum.

628530 (M9314) 14 oz.

Rust Removers

OSPHO Rust and Stain Remover

Chemprime Rust Remover

• Stops rust and prepares rusted surfaces for painting. • When applied to rusted surfaces Ospho causes rust to chemically change to iron osphate, an inert hard substance that turns the metal black.

• Chemprime removes rust and rust stains from cement, wood, porcelain, fiberglass, glass, painted surfaces, tile and linoleum; also treats steel, galvanize and cement for paint.

200035 (CP1) Gallon

437036 Quart 437037 Gallon

• Surface protector converts rust to a non-corrosive material and forms a highly protective coating. • Reduces the need for sandblasting. • Non-acid.

• A blend of acids and detergents that neutralizes rust and forms a phosphatized surface that inhibits the reformation of new rust and scales and prepares metal for painting. • This rust solvent can be used as a preventative corrosion inhibitor.

437035 (02EAR) Gallon

437011 (DC-550) Gallon

CLEANING PRODUCTS

Snee Endall-Rust Converter

Snee Rust Inhibitor Concentrate Phosphatizer

Vinyl Products

Marpro Plastic Cleaner and Restorer • Safe for use on Isinglass, Strataglass, Plexiglass, plastic and vinyl. • Protects against U.V. damage. • Resists fingerprints, dirt and grime. • Removes hazing, restores clarity.

3M Marine “One Step” Outdoor Vinyl Cleaner, Conditioner and Protector • Designed to clean, condition and protect marine vinyl and rubber components.

857295 (09023) 8 fl. oz.

7-2720 22 fl. oz.

3M Marine Vinyl Cleaner and Restorer Meguiar’s Mirror Glaze Clear Plastic Cleaner

• Rejuvenates vinyl and rubber surfaces. • Cleans and protects. • Easy spray formula.

• Removes fine hairline scratches from all types of clear plastic. • Unique, non-abrasive formula prepares the surface for Mirror Glaze Clear Plastic Polish.

857296 (09029) 15 fl. oz.

628543 (M1708) 8 fl. oz.

CLEANING PRODUCTS

Meguiar’s Mirror Glaze Clear Plastic Polish • Safely restores optic clarity to all clear plastics. • Provides a static-free coating that repels dust. • Safe and effective on both acrylic and polycarbonate surfaces.

628531 (M1008) 8 fl. oz.

Star Brite Vinyl Cleaner and Polish • A revolutionary new formula unlike any other vinyl cleaner, protectant or treatment. • Cleans, shines and protects all kinds and colors of vinyl.

625446 (91016) 16 fl. oz.

Star Brite Marine Vinyl Brite

Meguiar’s Vinyl and Rubber Cleaner/Conditioner • Deep cleans and revitalizes vinyl and rubber surfaces. • Restores color with a rich natural sheen.

628480 (M5716) 16 fl. oz. 628478 (M3916) 16 fl. oz. - H.D.

303 Protectant • 303 is a penetrating, waterproofing ultraviolet screen (sunblock). • Non-hazardous and biodegradable. • Use on anodized aluminum.

437408 437412 437421 437434

8 fl. oz. 16 fl. oz. 32 fl. oz. Gallon

Spray Trigger Refill Refill

Star Brite Vinyl Shampoo • Instantly removes dirt, mildew, grease and stains. • Won’t streak, stain or discolor vinyl. • Concentrated formula.

• Restores old marine vinyl to “like new” appearance. • Keeps new vinyl looking new. • Simple spray on application. • UV inhibitors screen out sun’s damaging rays. • Prevents vinyl from cracking, fading and discoloring.

625408 (80216) 16 fl. oz.

625434 (80316) 16 fl. oz.

625395 (83416) 16 fl. oz.

Star Brite Inflatable Boat and Fender Cleaner • Heavy duty formula removes dirt, grime, scuff marks, oxidation stains.

Battery Cleaners

CRC Marine Battery Cleaner • Neutralizes acid spills. • Cleans terminals, cables, cases, connectors, hold-downs, carriers. • Help prevent corrosion. • Assures maximum battery current and promotes longer life.

290433 (06023) 11 fl. oz.

CRC Marine Battery Terminal Protector • Prolongs battery life. • Lead-free protective coating prevents battery terminal corrosion. • Assures easier starting. • Use to protect hold-downs, bolts, brackets and terminals.

290445 (06046) 7.5 fl. oz.

Electronic Cleaner

CRC Marine QD Electronic Cleaner

Penray Electric Motor Cleaner

290255 (06102) 11 fl. oz.

604327 (7014) 19 fl. oz.

CLEANING PRODUCTS

• Instantly removes oil, grease, dirt, flux and other contaminants. • Helps prevent contact failure or malfunction. • Evaporates quickly, leaves no residue.

• Safe, non-flammable cleaning agent for electrical system parts. • Evaporation is quick, leaving no residue. • Extension tube is included for more exaction spray pattern.

Other Helpful Products

Penray Non-Chlorinated Brake Cleaner

Permatex Fast Orange Fine Pumice Lotion Hand Cleaner

• Quickly and effectively dissolves and removes grease, oil, brake fluid, and other contaminants from brakes, C.V. joints and clutch components.

• Biodegradable, waterless, petroleum solvent-free hand cleaner that contains no harsh chemicals, mineral oils or ammonia. • Bottle with pump/brush.

604320 (4620) 14 fl. oz.

545218 (25-218) Gallon • Cream version of Fast Orange Hand Cleaner.

545220 (35-406) 4.5 lb. Container

Marpro Salt Terminator • Dissolves salt and leaves protective sheen. • Protects against future corrision. • Mixer automatically dilutes concentrate and syphons it through standard garden hose. • Good on all surfaces exposed to salt water or air.

7-1031 Quart 7-1032 Gallon 7-1033 32 fl. oz. w/Nozzle

Marpro Resi-Clean Hand Wipes • Lightweight towels saturated with a biodegradable liquid. • Completely environmentally friendly, dispose of them by placing them in any ordinary trash can. • Designed to clean: 3M 5200 adhesives, caulking, epoxy resin, gelcoat, grease, mold release, over spray removal, polyester resin, polyurethane foam, varnish & vinyl ester resin.

6-7490 30 Per Pack 6-7495 100 Per Pack

Buffing Pads

3M Finesse-It Natural Buffing Pad

3M Hookit SBS System

• Made with specially selected Lamb's Wool hide. • This 3” diameter buffing pad is designed for use with Finesse-it compounds.

857106 (05711) Compounding Pad 857118 (05713) Polishing Pad 857120 (05717) Back-Up Pad

857085 (81470) 50 Per Case

3M Superbuff Polishing Pad • It is a double-sided, soft-edge polishing pad, specially designed for use with a polisher and glaze. • Fits all standard (5/8" shaft) slowspeed polishers.

857079 (05705) 6 Per Case

3M Superbuff Pad - 6”

BRUSHES & SCRUBS

• Allows you to recondition and maintain their boat, using their drill to obtain a high gloss finish. • Fits any standard electric drill with its 1/4" arbor and hex-head nut.

6 Per Case 6 Per Case 1 Per Case

3M Superbuff Buffing Pads - 9” • A new 100%, double sided, wool pad with a stiffer central hub for more cutting power. • This pad has untwisted yarn construction, which allows for more surface contact, while giving excellent cut and finish.

857069 (05703) 6 Per Case • A versatile general use blended wool pad with stiffer central hub for more cutting power. • Twice the usable buffing surface and has an untwisted yarn construction that gives excellent cut and finish.

857071 (05704) 6 Per Case

857055 (09038) 12 Per Case

3M Finesse-It Roloc Finishing Disc Pad • Pad is made with soft foam, Roloc button, and mushroom headed hooks. • Use with 3 inch soft Roloc Disc Pad. • Holds the Finesse-it Buffing Pad (red and white) firmly in place. • Soft foam provides good conformability.

857084 (14736)

Buffalo Industries Applicator Pads • Great for smooth and consistent application of waxes, stains, polishes and protectants. • Hand washable in soapy water. • Size: 6" diameter. • Material: Cotton cover over foam pad.

460511 (64011) 2 Per Pack

3M Perfect-It Foam Polishing Pad 857133 (05725) 2 Pads Per Bag - 12 Bags Per Case

3M Superbuff Adaptor 857135 (05710)

Cleaning Pads

Buff and Shine Compounding Pads

Buff and Shine Center Ring Pads

• • • •

• 100% 4 ply twisted wool grip pad. • Pile height: 1-1/2”.

Double sided. 100% wool, 4 ply twist. Pile height: 1-1/4”. Natural color.

812227 (753R) Diameter 7-1/2”

812203 (802N) Diameter 8” • • • •

Double sided. Wool blend, 4 ply twist. Pile height: 1-1/4”. Yellow color.

• Wool blend 4 ply twisted polishing grip pad. • Pile height: 1-1/2”.

812239 (753RY)Diameter 7-1/2”

812215 (802Y) Diameter 8”

NEW

NEW Buff and Shine Grip Backing Plate • Grip backing plate with 5/8"" x 11 threads.

812241 (658Y)

Buff and Shine Double Side Adaptor

NEW

• Our double sided pad adapter is made of 100% brass that will hold up to any job. • 5/8" x 11 thread. BRUSHES & SCRUBS

812253 (1400)

NEW

• Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out • Works 24-7

Cleaning Brushes

Captain’s Choice Handy Scrub

Captain’s Choice Deck Brush

• 2-1/2" x 6" block filled with a chemical resistant propylene bristle.

• 2-1/2" x 8" block filled with a firm, two color, chemical resistant propylene bristle. • Threaded hole for handle.

437525 (M835)

437563 (M740)

Captain’s Choice Cleaning Pads • Pad attached to a 3-1/2" x 6" handle.

857083 (M931) Light Grit Pad 857082 (M932) Medium Grit Pad 857081 (M933) Heavy Grit Pad

Captain’s Choice All Purpose Brushes • 8-1/2" x 3" block filled with a chemical resistant, propylene bristle.

460408 (M853) Firm, 2 Color Bristle 460410 (M855) Very Stiff Bristle

Captain’s Choice All Purpose Brushes • 20" x 3" block filled with a chemical resistant propylene bristle.

460421 (M872) Extra Soft Synthetic Bristle 460423 (M873) Firm, 2 Color Bristle 460439 (M875) Very Stiff Bristle

Captain’s Choice Wash & Scrub Brush • Medium grit scrubber strip for those hard to clean areas. • Large 10" block for extra fast cleaning and it floats. • Threaded hole for handle.

BRUSHES & SCRUBS

460383 (M763)

Captain’s Choice Deluxe Boat Wash Brushes • 3" x 9" block with a protective bumper. • Threaded hole for handle.

460345 (M753) Filled with Firm Solvent Resistant Bristle 460369 (M750) Filled with an Extra Soft Synthetic Bristle

Captain’s Choice Teak Brush • 2-1/2" x 7" block filled with a firm propylene bristle. • Threaded to accept any of our handles.

439719 (M773)

Mr. LongArm Flow-Through Brushes

Magnolia Deck Brushes

• For use with HydraSoar and TeleWash water-fed telescoping extension poles. • Plastic block with full rubber bumper prevents scratching. • Chemical resistant materials work well with many types of cleaners.

• Stiff palmyra fiber. • Staple set in a smooth sanded hardwood block with one threaded and one tapered handle hole. • Length of trim: 2". Length 10".

460155 (0405) Soft 460167 (0406) Stiff 460179 (0407) Very Stiff

575057 (110) • Filled with high quality polypropylene. • Staple set in a smooth sanded hardwood block with one threaded and one tapered handle hole. • Length of trim: 2". Length 10" with yellow bristles.

575069 (310Y)

Handles

Mr. LongArm Pro-Pole Model Series 3200 - Light Duty

Mr. LongArm Smart System Twist-Lok

• Composite fiberglass fluted handle for easy grip and anodized inner tube.

460105 (9236) Length 3’ to 6’

• Quality, lightweight anodized aluminum construction.

460117 (3208) Length 4-1/4’ to 7-3/4’

Corona Wood Extension Pole

Captain’s Choice Deck Brush with Handle Kit

570160 (R-1248-PT) Length 48”

• Contains 437563 (M740) deck brush, a 48" long 2-piece painted hardwood handle and an extra strength nylon handle connector.

Corona Metal Threaded Handle

460523 (N747)

• Selected hardwood with clear lacquered finish.

575071 (R-1249-DCM) Length 4-1/2’

Swobbit Cleaning Products

Swobbit Perfect Poles • The strongest, easiest-to-use telescoping handle made. • Exclusive teardrop shape makes it up to 67% stronger than other aluminum handles. • Ergonomic design is easier to hold and less tiring to use. • Accepts all Swobbit® System Uni-Snap accessories ensuring a quick-releasing, positive locking, no slip connection. • Made from aircraft grade, heat treated anodized aluminum tubing. • Patented tracking system.

460208 460206 460193 460181

(45640) 2’ - 4’ (45650) 3’ - 6’ (45660) 5’ - 9’ (45670) 6’ - 11’

BRUSHES & SCRUBS

World’s finest cleaning tools that feature the exclusive Uni-Snap System. Uni-Snap allows quick changes between Perfect Pole and Swobbit Accessories with a positive lock, no slip connection.

Swobbit First Mate™ Telescoping Handle • Quickly adjusts to different lengths. • Made from aircraft-grade, heat treated anodized aluminum tubing.

460212 (44650) 3’ - 6’ 460214 (44660) 5’ - 9’

Swobbit Fixed Length Handle • A lightweight alternative to telescoping handles. • Made from heat treated, anodized, drawn aluminum tubing.

460331 (46710) Length 48”

Cleaning Products

Swobbit Threaded Uni-Snap Adapter

Swobbit Premium Deck Brushes

• Allows you to use the Perfect Pole with a standard ACME threaded product. • Uni-Snap adapter snaps into the Perfect Pole converting it into a threaded end product. • Made of drawn, heat treated anodized aluminum with a glass filled nylon tip.

• • • •

460258 (66610)

Oversized 7.5” molded poly-block. Won’t rot, mold, mildew, crack or split. Uni-Snap adapter molded into block eliminating wobble. 20º bristle flare provides optimum cleaning efficiency.

460220 (77345) Soft-Flagged Bristle 460218 (77350) Medium Bristle 460232 (77355) Stiff Bristle

Swobbit Deck Brushes Swobbit Universal Boat Hook • Made with UV safe polycarbonate. • Dimensions: 9-1/4” L x 4” W.

460333 (66650)

• Old fashioned varnished premium hardwood blocks feature high quality bristles set with corrosion resistant wire for extra durability. • Welded safety bumpers protect surrounding finishes while First Mate’s quick release mechanism locks the brush onto the handle until you’re ready to take it off.

460222 (76340) Extra Soft Bristle

Swobbit Aquazorber Drying Mop • Made from imported material featuring 2" wide die cut strips for maximum absorbency.

460307 (31315) BRUSHES & SCRUBS

Swobbit Quick Dry Adapter • Quik Dry Adapter allows you to use the 14" or 18" water blade with the Perfect Pole telescoping handle. • Dry hard to reach areas like decks, hardtops, roofs, hull sides and more, quickly and easily. • Adapter is adjustable to 180 degrees.

460268 (21215)

Swobbit Quick Dry Water Blade • Soft medical grade silicone blade that molds to curves and contours. • Patented T-bar edge dries in one pass. • Safe for paint, gelcoat, enclosures, windows and rightwork.

460270 (21214) 14” Blade

Swobbit Swivel Pad Uni-Snap Adapter • Made of durable ABS Plastic. • Dual-axis Swivel plate features heavy duty hooks to securely attach Swobbit System scrub pads.

460321 (55450)

Star Brite Big Boat Bail Sponge • • • •

Huge bail sponge. Absorbs more than 1 qt. of liquid. Super absorbent cellulose construction. Measures 7-3/4” x 4-1/4” x 2-3/4”.

360595 (40075)

Swobbit Collapsible Bucket • • • •

10” diameter collapsible bucket. Zippered storage cover. Coated and sealed acrylic fabric. Stainless steel handle.

460446 (SW66660)

NEW

Cleaning Products

3M Insta-Lok Doodlebug Pad Holder Kit

Swobbit Terry Towel

• This holder has a swivel head and is most commonly used with 1-1/8" by 5' wooden broom handle. • Kit includes: (1) 3M Doodlebug White Cleaning Pad and (1) 3M Doodlebug Brown Scrub ‘N Strip Pad.

• Dimensions: 17" x 14".

857095 (6472)

460357 (56100) 3 Pack 460360 (56106) 12 Pack

Buffalo Industries Marine Shop Towels • Dimensions: 14" x 14".

3M Doodlebug Pads

570565 (62023) 7 Pack Roll 570576 (62031) 25 Pack Bag

• Designed for delicate surfaces and light cleaning jobs.

570576

857097 (8440) White

570565

• Designed for medium duty cleaning jobs.

• Designed for tough cleaning and stripping jobs.

Buffalo Industries White T-Shirts

857098 (8541) Brown

570541 (10524) 25# Box

Swobbit Aqua Dry PVA Cloth

3M Scotch-Brite General Purpose Commerical Souring Pad - 96

• Made from reinforced PVA material. • Towel measures 3.19 sq. ft. 27" x 17".

• It replaces steel wool and metal sponges, and won’t leave metal slivers in hands. • Dimensions: 6" x 9".

460282 (38855)

855080 (08293)

BRUSHES & SCRUBS

857096 (8242) Blue

Swobbit Diaper Cloth 460362 (56405) 6 Pack

3M Scotch-Brite Hand Pads

Buffalo Industries Cham-Pad

• Light Duty Cleansing Pad. • Dimensions: 6" x 9".

• Drying and cleaning for marine and auto fiberglass, paint, glass and metal surfaces. • Material: 100% Oil-tanned leather chamois exterior sponge foam interior. • Dimensions: 7" x 4" x 1-3/4".

• General Purpose Hand Pad. • Dimensions: 6" x 9".

460290 (65030)

855102 (07448) 20 Pads Per Box

855087 (07445) 20 Pads Per Box

855099 (07447) 20 Pads Per Box • Ultra Fine Hand Pad. • Dimensions: 6" x 9".

Chemicals

Marpro Lacquer Thinner

Marpro Acetone

• Thins and cleans more effectively than mineral spirits. • Used to help control brushing and spraying consistency. • May be used as a cleaner for spray equipment, brushes and rollers. • Not for use on nylon or synthetic tools.

• Premium grade quality, 100% virgin acetone. • A colorless, clear, fast drying solvent used extensively for cleaning brushes, rollers, as a degreaser, cleaner in fiberglass fabrication and formulations for removing paint, lacquer and varnish.

6-7465 Quart 6-7466 Gallon 6-7467 5 Gallon

Marpro M.E.K. Solvent • An active ketone solvent for cleaning and dissolving epoxy and polyester resins and caulks. • Slower evaporating than acetone.

6-7456 Quart 6-7457 Gallon

Marpro Denatured Alcohol • An excellent fuel for alcohol burning stoves and lamps. • Burns with a clear colorless flame.

CHEMICALS

6-7460 Quart 6-7461 Gallon 6-7462 5 Gallon

6-7450 Quart 6-7451 Gallon 6-7452 5 Gallon

Marpro High Performance Resin Cleaner (Acetone Replacement) • Environmentally friendly • Versatile high solids resin cleaner designed for clean-up purposes in a typical composites manufacturing facility. • Designed to remove uncured Polyester, Vinyl Ester, Epoxy Resin and GelCoat from tools, equipment and cleaning vessels. • Aggressive enough to be an effective cleaner for cured resins under specific conditions. • Non-corrosive formula is compatible with steel, aluminum and stainless steel. • Dilution with water provides additional value and extended product life.

6-7445 Quart

Marpro Mineral Spirits • Good brush cleaning solvent. • Low odor, quick drying. • May be added to oil base paints, enamels and varnishes for exterior and interior use to thin and control flow rate. • Do not use with synthetic or rubber base enamels or water thinned paints.

6-7470 Quart 6-7471 Gallon

Marpro Parts Washer Solution • Low odor, quick drying, crystal clear formula. • Effectively removes dirt, grease and grime. • Excellent for areas where low flash point solutions can’t be used. • Good for cleaning parts, brushes and rollers.

6-7405 Gallon 6-7407 5 Gallon

NEW 90

Teleflex SeaStar, BayStar Power Purge Jr.

Teleflex SeaStar, BayStar Power Purge Jr. • SeaStar and BayStar Power Purge Jr. is the quickest way to bleed a SeaStar and BayStar system in the field and assure a rock-solid steering feel every time! • The Power Purge Jr. reduces installation and warranty costs while enhancing the quality of the boat to the end user. A typical manual fill and purge takes the average experienced installer or service technician about 30 minutes per boat - by using the Power Purge Jr. this can be reduced to 10 minutes or less. • Advantages: Steering feel is solid every time. Complete fill & purge in 10 minutes or less. Fast and efficient. Easy to operate. Screens contaminants from oil. Quick connect fittings. Convenient portable size. Convenient electrical hook-up utilizing your 12 volt boat battery. Optional Dual Cylinder Purging Kit HA 5461 available. • Ideal for installation and routine maintenance of SeaStar & BayStar hydraulic steering systems by Servicing Dealers and Ship Yards. • Accessory: HA 5461 Dual Cylinder Purge Kit.

797792 (HA5445)

Hydraulic Fluid

• For use in most hydraulic steering systems.

7-1087 Quart 7-1086 Gallon

12 Per Case 4 Per Case

Teleflex SeaStar Hydraulic Fluid • Hydraulic fluid is formulated to provide the best performance for your steering system. • A perfect blend of viscosity stabilizers, anti-wear ingredients, defoaming agents and corrosion inhibitors will ensure maximum steering life and performance.

799779 (HA-5430) Quart 799760 (HA-5440) Gallon

CHEMICALS

Marpro Premium Synthetic Marine Steering Fluid

Teleflex Filler Kit • Nozzle for filling your Hydraulic SeaStar Systems. • For use on SeaStar's Helm I/O, O/B, and I/B engine pumps for boats up to 40 foot. • Includes: Tube and pushpin to vent and re-seal SeaStar HA5430 Oil bottle (Not included).

799784 (HA-5438)

Corrosion Inhibitors

T-9 Rust and Corrosion Protection Lubrication • Waterproof lubrication. • Combination of solvents, lubricants and waxes designed for penetration, moisture displacement, lubrication and protection.

290700 (T90004) 4 oz. 290712 (T90012) 12 oz.

• Specially formulated anti-corrosion sealer. • Featured capillary reaction, flows and penetrate into hard to reach areas. • Ozone safe hydrocarbon product. • Excellent sprayable anti-corrosion performance. • Non-drying and easy to apply.

6-4050 12 oz.

CRC Marine Heavy Duty Corrosion Inhibitor • Forms a corrosion-proof insulating film. • Film stays flexible – will not crack or craze.

290306 (06026) 12 oz.

CRC Freeze-Off® Super Penetrant

Marpro Corrosion Inhibitor

Corrosion X • It stops and prevents rust or corrosion and lubricates with unexcelled efficiency. • It also penetrates quicker than products specifically designed for that purpose.

302953 (90101) 6 oz. 302954 (90102) 16 oz.

NEW

• A unique formula that immediately drops the temperature of the area in direct contact with the spray. • The freezing effect cracks rusted surfaces, allowing Freeze-Off to reach deeper and work more effectively than other penetrants. • Low VOC Formula.

Corrosion X Heavy Duty • We’ve taken Corrosion X and added thickening agents to produce a highperformance, thick-film version for maximum protection against serious rust and corrosion.

302961 (90104) 12 oz.

CHEMICALS

290128 (05002) 11.5 oz.

Lubricants

Star Brite Marine Formula White PTEF Lubricant • • • •

Special PTEF formula will not wash off. Protects from -65° F to +650° F. Reduces wear and friction. The ultimate lubricant - exceeds performance of normal grease. • Non-toxic, non-staining.

627161 (85504) 4 oz. Container

Star Brite Snap and Zipper Lubricant with PTEF • Use on boat snaps, metal and plastic zippers to protect against corrosion, reduce wear and friction, prevent binding and repel salt spray deposits. • Non-toxic, non-staining. • Will not wash off. • Protects from -65° F to +650° F.

627173 (89102) 2 oz. Tube

Lubricants

Marpro Multi-Purpose Lubricant • A high quality multipurpose, four-way lubricant. • Penetrates, lubricates, protects, cleans, repels moisture, fights rust.

6-4060 11 oz.

Marpro White Lithium Grease • A high temperature premium grease serves as an excellent gelling lubricant for most marine, industrial and automotive applications. • Excellent elasticity and recovery for a wide range of operating temperatures. • Superior water resistance.

6-4055 11 oz.

CRC Marine White Lithium Grease with Teflon • • • •

Heavy duty lubricant. Will not wash off, melt or freeze. Ideal metal to metal lubrication. Superior performance in any weather and temperature. • Protects rigging, machinery, mechanical parts, tools. • Break in lubrication for bearings, pistons, cams, etc.

CRC Marine Formula 6-56 • • • • • •

Starts wet engines. Loosens rusted parts and fights moisture. Protects against corrosion. Lubricates. Biodegradable. Keeps stored tools from rusting.

290089 290091 290104 290117

(06005) 5 oz. (06006) 9 oz. (06007) 11 oz. (06008) Gallon

290344 (06037) 13 oz.

• Disposable plastic spray applicator. • Non-pressurized.

290522 (14021) 24 oz.

CRC Marine Silicone • • • • •

Heavy duty formula. Won’t wash off. Use on anything that squeaks or sticks. Waterproofs canvas. Eases off/on application of canvas fasteners, snaps and zippers. • Resists cold and heat. • Effective from -40° F to +400° F. • Contains no CFC’s. Non-staining.

CHEMICALS

CRC Spray Applicator and Trigger

290457 (06077) 7.5 oz.

Penray Open Gear Lube • Fortified with a finely dispersed Moly Sulfide in addition to a petroleum based extreme pressure lubricant. • Ideal for use on all open gears. • Resists temperature extremes. • Reduces friction from metal-to-metal contact.

604324 (7003) 11 oz.

Penray Penetrant and Lubricant • Chemprime removes rust and rust stains from cement, wood, porcelain, fiberglass, glass, painted surfaces, tile and linoleum; also treats steel, galvanize and cement for paint.

604315 (4516) 11 oz.

Carb & Choke Cleaners and Enginer Cleaners

Marpro Carb and Choke Cleaner

Permatex Motor Muscle Carb and Choke Cleaner

• • • •

• Super jet spray quickly cuts and removes grease, gum and varnish. • OEM certified. • Oxygen sensor-safe. Improves performance. • Level 3. • Suggested applications: Manual & automatic chokes, baffle plates and carburator linkages.

Sprays away varnish and gum. Cleans chokes. Cleans PCV valves. Smooths out the idle and frees sticking parts.

6-4070 12 fl. oz.

CRC Marine Carb and Choke Cleaner • Cleans carburetors, automatic chokes, heat risers and PCV valves. • Removes gum, carbon and varnish deposits. • Oxygen sensor safe. • Improves fuel system performance.

289353 (06064) 12 fl. oz.

545117 (80079) 12 fl. oz.

CRC Marine Engine Tune Up and Decarbonizer • Breaks down carbon build-up and other harmful engine deposits left behind by modern fuels. • Dramatically improves engine performance and power and solves many rough-idle problems.

675807 (06121) 13 fl. oz.

Penray Starting Fluid • “Trigger-fast” starts for diesel and gasoline engines at low temperatures and under humid weather conditions. • Effective at 65° below zero. • Prolongs battery and starter life.

483141 (5315) 10.1 fl. oz.

Marpro Engine Degreaser • A blend of grease-cutting solvents that dislodge oils, lubricants and mineral grease from metal surfaces quickly and efficiently. • Provides deep down scrubbing power. • Clings to most vertical surfaces. • Leaves no residue. • Non-flammable and nonconductive.

CHEMICALS

6-4075 19 fl. oz.

Spray Nine Marine Grez-Off • Heavy duty Biodegradable Formula - Quickly and completely cuts through oil, grease and grime. • Ideal for: outboards, inboards, I/O’s, asphalt drives, dock and mooring, equipment and more.

437079 (30232) 32 fl. oz.

CRC Marine Cleaner and Degreaser • Dissolves and flushes away dirt, oil and grease. • Cleans marine engines and electrical equipment. • Leaves no residue. Nonflammable and noncorrosive. • Apply by spray, brush or dip.

290243 (06019) 19 fl. oz.

Gas Additives

NEW

• Protects all gas powered 2 and 4 cycle engines from the harmful effects of ethanol. • Prevents phase separation, protects against corrosion, cleans the fuel system, stabilizes fuel and restores power. • Equally effective in E10 to E85 fuel. • Treats 1 oz. per 10 gallons.

289342 (06141) 8 fl. oz. 289344 (06142) 16 fl. oz. 289346 (06143) 32 fl. oz.

• For inboard and outboard gasoline engines. • Protects gas and engine components during storage. • Prevents corrosion of fuel tank and fuel delivery system. • Concentrated formula - 1 oz. treats 5 gallons.

Treats 40 Gallons Treats 80 Gallons Treats 160 Gallons

Star Brite Star Tron Gas Additive • Reduces all emissions. • Prevents fuel oxidation and stabilizes fuel chemistry for at least 1 year. • Lowers fuel system maintenance. • Eliminates carbon build-up in fuel delivery system and on exhaust components. • Increases fuel economy up to 15%.

675848 (93008) 8 fl. oz. 675849 (93016) 16 fl. oz. 675851 (93032) 32 fl. oz.

Star Brite Fuel Tank Cleaner • Exceptional in cleaning sludge and algae from gasoline and diesel tanks. • Treats 250 gallons.

• Contains a powerful anti-oxidant, degummers, inhibitors & metal deactivators. • Keeps gasoline and diesel fuel refinery-fresh. • Contains NO alcohol or methanol. • Also helps prevent octane loss during storage.

460797 (MDR-549) 4 fl. oz. 460801 (MDR-551) 16 fl. oz.

Star Brite Ez-To-Store Gas Storage Stabilizer

460880 (84308) 8 fl. oz. 460882 (84316) 16 fl. oz. 460884 (84332) 32fl. oz.

MDR Stor-N-Start Gas Stabilizer

Treats 125 Gallons Treats 250 Gallons Treats 500 Gallons

Treats 20 Gallons Treats 80 Gallons

CRC Marine Fuel Stabilizer - Gas • Concentrated formula solves engine problems. • Prevents gum and varnish build-up. • Safely cleans carburetors, fuel injectors, intake valves, ports, fuel lines, manifold. • Helps prevent corrosion.

289303 289315 289327 289339

(06161) 8 fl. oz. (06162) 16 fl. oz. (06163) 32 fl. oz. (06164) Gallon

Treats 40 Gallons Treats 80 Gallons Treats 160 Gallons Treats 640 Gallons

Marykate Fuel Stabilizer - Gas

CHEMICALS

CRC PhaseGuard4™ Ethanol Fuel Treatment

• Increases power output, improves fuel economy, improves octane of diesel fuel. • Treats 120 gallon gas and 75 gallon diesel.

216445 (4908) 8 fl. oz.

CRC Gas Additive for Gas Tanks • • • • • •

Removes water from gasoline. Cleans and protects fuel system. Prevents fuel line freezing. Inhibits corrosion. Assures faster starting & quicker pickup. Treats 12 to 16 gallons.

290546 (05343) 12 fl. oz.

675852 (93664) 64 fl. oz.

Diesel Additives

Star Brite Ez-To-Store Diesel Storage Stabilizer

MDR Stor-N-Start Diesel Stabilizer

• Protects fuel and engine components during storage. • Eliminates need to fog engine, prevents corrosion of fuel tank and fuel delivery system, stops formation of gum and sludge, insures quick starts after storage. • Use 1 ounce to treat 10 gallons.

460892 (84408) 8 fl. oz. 460894 (84416) 16 fl. oz.

• Contains a powerful anti-oxidant, degummers, inhibitors and metal deactivators. • Keeps gasoline and diesel fuel refinery-fresh. • Contains NO alcohol or methanol. • Also helps prevent octane loss during storage.

460812 (MDR-561) 16 fl. oz. 460817 (MDR-554) 32 fl. oz.

Treats 192 Gallons Treats 384 Gallons

Treats 80 Gallons Treats 160 Gallons

Star Brite Star Tron Diesel Additive • Eliminates algae and fungal growth without the use of posions. • Reduces all emissions, including carcinogenic, particulate smoke. • Prevents fuel oxidation and stabilizes fuel chemistry for at least 2 year. • Lowers fuel system maintenance. • Eliminates carbon build-up from burners, injectors and exhaust components. • Increases fuel economy up to 15%.

675846 675850 675863 675861

(93108) 8 fl. oz. (93116) 16 fl. oz. (93132) 32 fl. oz. (93100) Gallon

Treats 256 Gallons Treats 512 Gallons Treats 1,024 Gallons Treats 4,096 Gallons

CRC Marine Fuel Stabilizer - Diesel • A concentrated, high-potency formula that keeps stored gas fresh for easy start-up next season and optimum performance year round. • Protects against gum and resin build-up. • Protects internal engine components and fuel system from corrosion.

289416 (06171) 12 fl. oz. 289428 (06172) 16 fl. oz.

Treats 80 Gallons Treats 160 Gallons

CHEMICALS

Star Brite Bio-Diesel • Prevents microbial growth. Kills existing bacteria, algae and fungus. • Stops corrosion caused by microorganisms. • Prevents plugging of filters due to organic growth. • 1 fl. oz. treats 60 gallons of diesel fuel. • Works up to 10 times faster than other diesel fuel biocides. • Treats 480 gallons.

675845 (91216) 16 fl. oz.

Penray Fuel-Prep 2012 Diesel Fuel Conditioner • It is a highly concentrated version of Fuel-Prep 1000. • It’s ideal for applications where large quantities of fuel must be stored and utilized. • Note: One gallon of Fuel-Prep 2012 treats 12,500 - 25,000 gallons.

604226 (20121) Gallon 604238 (20125) 5 Gallon

Fogging Oil

Marpro Fogging Oil • Internal and external rust protection. • Ideal for seasonal motor storage.

6-4065 12 fl. oz.

Star Brite Fogging Oil • Spray formula coats all interior engine surfaces with a heavy duty polymer coating that prevents corrosion during winter storage. • Special formula makes starting the engine after storage quick and easy.

460888 (84812) 12 fl. oz. 460889 (84800) Gallon

Star Brite Ez-To-Store Crankcase • Stabilizes oil chemistry during storage prevents oxidation and formation of resins and varnish. • 8 fl. oz. treats 5 U.S. quarts of oil.

CRC Marine Engine Stor Fogging Fluid • As fogging fluid, it protects outboard motors, marine engines and internal combustion engines, insures longer life. • As long tem metal protectant, it keeps pistons, rings and cylinder walls corrosion free. • Also protects electrical connections in use/storage.

289175 (06068) 13 fl. oz. 289151 (06072) 13 fl. oz. - For OMC Motors

MDR Crankcase Stor-N-Start • Winterizing motor oil additive protects against rust on pistons, rings and lower cylinder walls during winter storage. • During storage, motor oil eventually drains off cylinder walls, pistons, rings, bearings, and all other internal metal engine parts, exposing them to corrosion. • Forms a protective shield on all internal parts, preventing rusting during storage.

460820 (MDR-600) 8 fl. oz.

460886 (84708) 8 fl. oz.

Penray Cooling System Treatments

• Keeps diesel engines running cleaner. • This easy-to-use product reduces scaling and corrosion and acts as a lubricant in the cooling system. • Controls formation of harmful scale deposits, reduces metal corrosion and cavitation erosion, and lubricates the water pump and other metal surfaces.

603933 603945 604214 604228

(200016) 16 fl. oz. (200064) 1/2 Gallon (200005) 5 Gallon (200055) 55 Gallon

Penray Coolant Test Strips 603959 (TS100) 50 Strips Per Bottle

Pencool 3000 with Stabil-Aid Cooling System Treatment with Corrosion Inhibitor and Coolant Stabilizer

CHEMICALS

Pencool 2000 Cooling System Treatment with Corrosion Inhibitor

• Helps to prevent the formation of gel deposits in cooling systems. • Blocks the formation of this gel, conditions cooling system water and protects all cooling system metal components from corrosive attack. • Maintain proper cooling system heat transfer characteristics and long engine life.

604264 (300064) 1/2 Gallon 604276 (300005) 5 Gallon 604288 (300055) 55 Gallon

Engine Oil

Star Brite Super Premium 2 Cycle Engine Oil - TC-W3

Star Brite Premium 2 Cycle Engine Oil - TC-W3

• Meets or exceeds manufacturers' specifications. • NMMA approved - meets or exceeds their stringent TC-W3 requirements. • Exceeds performance specifications for FICHT, Optimax and HPDI engines. • Environmentally friendly, reduces emissions. • For use in oil injection, 2 cycle and pre-mix engines.

• Meets or exceeds manufacturers' specifications. • Environmentally friendly, clean burning fuel that reduces emissions. • Engineered for operation under extreme conditions. • For use in oil injection, 2 cycle and pre-mix engines.

452158 (19232) Quart 452161 (19200) Gallon 452172 (19225) 2.5 Gallon

12 Per Case 6 Per Case 2 Per Case

452185 452190 452196 452200

(19016) Pint (19032) Quart (19000) Gallon (19025) 2.5 Gallon

12 Per Case 12 Per Case 6 Per Case 2 Per Case

Star Brite Pro Star Super Premium Synthetic Blend 4 Stroke Outboard Oil • Designed for 4 stroke high-performance outboards, gasoline inboards and stern drives. • Certified under NMMA’s FC-W category. • Meets or exceeds all criteria for viscosity, filter plugging, foaming and aeration. • Exceeds OEM requirements - will not void engine warranty.

189422 (28132) Quart 189423 (28100) Gallon

Bearing Grease

LUBRICATION

Aqua Lube Wheel Bearing and Chassis Grease

Star Brite Wheel Bearing Grease

299001 299010 299014 299012

451725 (26003) 3 oz. Cartridge 451726 (26014) 14 oz. Cartridge 451738 (26016) 1 lb. Tub

(AL0035) 5 Gallon Pail (AL1450) 14.5 oz. Cartridge (AL1624) 16 oz. Tub (AL3336) 3 Pack of 3 oz. Cartridge

Sierra Premium Marine Bearing Grease 451524 (18-9700-4) 3 oz. Cartridge 451714 (18-9710-0) 10 oz. Tub

Gear Lube

Sierra Premium Lower Unit Gear Lube • Recommended for all general marine applications requiring a GL-4 class lubricant. • Ideal for replacing all old hypoid 90 application needs. • Formulated for use in freshwater or saltwater conditions and all standard marine applications.

189600 (18-9600-0) 10 oz. Tube 189602 (18-9600-2) Quart 189605 (18-9600-5) 5 Gallon

Sierra Hi-Performance Synthetic Blend Lower Unit Gear Lube • Synthetic blended marine formulation reduces operating friction for increased performance and protection of gears, bearings and other gear case components. • Recommended for use in high performance and high load operating conditions in both outboard and I/O lower unit.

451879 (18-9650-2) Quart 189651 (18-9650-5) 5 Gallon

Star Brite Hypoid 90W Lower Unit Gear Lube

Sierra Type C Gear Lube

• For API MT-1, GL-5, MIL-L-2105D service. • For outboards and stern drives with mechanical shift mechanisms. • Formulated with special anti-wear additives, rust and corrosion inhibitors.

• Formulated for older model outboards and I/O’s equipped with electric shift. • Reduces friction & protects gears, bearings and other gearcase components.

451841 (18-9620-0) 10 oz. Tube

451906 (27110) 10 oz. Tube 451905 (27132) Quart 451904 (27105) 5 Gallon

Star Brite Synthetic Lower Unit Gear Lube - 80W90

• For API MT-1, GL-5, MIL-L-2105D service. • Recommended for use in Mercury, Mercruiser, Johnson, Evinrude, OMC, Force, Mariner, Nissan, Suzuki, Yamaha and Volvo. • Will not void manufacturers’ warranties.

• For API GL-5, MT-1 service. • Recommended for all engines over 100 hp. • Recommended for use in Mercury, Mercruiser, Johnson, Evinrude, OMC, Force, Mariner, Nissan, Suzuki, Yamaha and Volvo.

451776 (27232) Quart 451800 (27205) 5 Gallon

LUBRICATION

Star Brite High Viscosity Lower Unit Gear Lube 80W90

451803 (27010) 10 oz. Tube 451815 (27032) Quart

Power Trim and Tilt Fluid

Sierra Power Trim and Tilt Fluid • Formulated for high operating pressure. • Anti-foam additives assures uniform flow with reduced air contamination in hydraulic systems. • Designed for heavy duty use at high operating pressures in applications subject to varied temperature ranges.

189750 (18-9750-0) 10 oz. Tube

Star Brite Power Trim and Tilt Fluid • Formulated for high operating pressure. • Anti-foam additives assures uniform flow with reduced air contamination in hydraulic systems.

451910 (28510) 10 oz. Tube

Lubricant Accessories

Star Brite Grease Gun • Heavy duty all steel construction for dependable, long service life.

451500 (28703) For use with 3 oz. Cart. 451598 (28714) For use with 14 oz. Cart.

Attwood Filter Funnel

Marpac Universal Gear Lube Pump • Quart size pump for outboard lower units, power trim and tilt units. • Fits outboards and stern drives with 3/8”-16 threaded screw. • Fits outboards: Johnson/Evinrude, Mercury/Mariner, Suzuki 25 HP & larger and Yamaha 8 HP & larger. • Fits stern drives: OMC, OMC Cobra, OMC SX Cobra, MerCruiser, Speedmaster, Volvo Penta SX™. • 8 mm threaded adapter included for: Yamaha, Honda, Mercury 4-stroke (over 115 HP), Nissan and Tohatsu.

7-6020

• Red. • Non-splashing. • Lightweight floating polyethylene plastic construction. • 32 oz. capacity. • Fine mesh screen filters out most foreign matter.

237506 (8888-1)

Racor Filter Funnel - 5 GPM • Heavy duty, fast-flow, filter-in-a-funnel that separates damaging free water and contaminants from gasoline, diesel, heating oil and kerosene.

314861 (RFF8C)

Future Enterprises Motor Mate • Oil to gas measuring device for 2-cycle engines. • Includes oil – gas mixture ratios: 100-1, 50-1, 24-1 and 10-1. • All measurements shown are in gallons and liters.

Moeller Flex Funnel - 18” LUBRICATION

• Made from a tough, high-density polypropylene. • Great for gas/oil mix 2-cycle engines need. • Stabilizing handle on all standard funnels conveniently allows for smooth steady pouring.

237507 (003603)

Gear Lube Adapter for Honda/Yamaha/Nissan/Tohatsu 100

189794

452300

Marpac Oil Drain Plugs • Keep the oil in and the water out. • Includes: Plugs, gasket and O-ring. • Sold 5 packages per box.

7-5999 7-6000 7-6005 7-6006 7-6011 7-6012 7-6017

Plug Gasket Magnetic Drain Plug Magnetic Drain Plug Plug Gasket O-Ring Plug Gasket Plug Gasket

Mercury Lower Unit Mercury Lower Unit Yamaha Lower Unit Yamaha Lower Unit Volvo Lower Unit Volvo Lower Unit OMC Lower Unit

Reverso Oil Changing Systems

Reverso Impeller Reversing Pump • • • • • • •

Reversible. Self-priming. Chrome plated brass head. Built-in switch guard. Powerful 12 amp motor. Diesel transfer pump “CE” certified. It utilizes a high-torque 12 amp motor to transfer oil from the engine to a waste container, than pumps fresh oil back into the engine. • Dimensions: 9.5" x 4" x 3.75". • Draw: 12 amp. • 12 volt.

Reverso Gear Pump Commercial Grade Oil Change System • Manifold systems utilizing a gear pump with bronze gears and stainless steel shafts. • Reversing switch for high speed oil transfer to and from remote containers. • Utilizing bronze gears and stainless steel shafts, the GPC-302 system transfers lube oil, diesel fuel, antifreeze or water through full flow valves at a rate up to 3 gallons per minute. • 3 valve system. • 12 volt.

512295 (GPC-3023-12)

512233 (OP-6-12)

Reverso Oil Change System • Utilizes a powerful impeller pump coupled to a 12 amp high-torque motor and nickel-plated full flow valves to transfer hot or cold oil quickly and cleanly. • Dimensions: 10.5" x 8.75" x 4.5". • 12 amp. • 3 valve system. • 12 volt.

LUBRICATION

512384 (OP-703-12)

101

Oil Changers

Jabsco DIY Economy Engine Oil Changer • Will extract up to 50 weight of oil at a temperature of 70° F through the engine’s dip stick tube. • Includes: Powerful suction pump with integral on/off switch, 10 quart bucket oil receiver with pouring spout, 7’ power leads with alligator clips, 8’ oil & heat resistant suction tube. • 12 volt.

415338 (17850-0012)

Marpac Fluid Extractor • Portable fluid extractor empties in 16 pumps or less. • No power source needed. • Warm or cold fluid extraction. • Includes: Extraction tube kit. • Larger capacity than competitive models in field.

7-0950 Holds 6.5 liters/6.9 Qts./1.7 Gals. 7-0951 Holds 4.0 Liters/4.2 Qts./1.1 Gals.

Jabsco “Porta Quick” Oil Changer

Jabsco Flat Tank Engine Oil Change System • Includes: Powerful suction pump with integral power switch, 14 quart holding container, 7’ power leads with alligator clips and 8’ oil and heat resistant suction tube. • 12 volt.

• It removes oil and sludge through the dipstick tube making engine oil changes quick and easy without getting under the engine. • Includes: Reversible pump with integral reversing switch, 4’ of neoprene hose with 1/4" x 40" Teflon dipstick probe, 8' power cord with alligator clips, 14 quart holding container and female garden hose connector. • A retractable pouring spout is also provided if it is not desirable to use the pump for emptying. • 12 volt.

415326 (17800-2000)

415340 (17860-0012)

Jabsco Drill Pump Kit

LUBRICATION

• Includes: 3.5 GPM self-priming drill pump that chucks into standard 1/4" or 3/8" drill, (2) 3/4" garden hose thread port adaptors, 3' of 1/2" hose, probe adaptor and 1/4" x 40" dipstick probe. • Note: Not for pumping gasoline or flammable liquids.

415275 (17215-0000) Complete Kit 415287 (17250-0003) Drill Pump Only 415353 (17255-0003) Repl. Impeller/Shaft Assembly

Jabsco Utility Hand Pumps • Includes: 3’ of 1/2” hose, (2) 40” of 1/4" dipstick probes, neoprene intake adaptor and tube connector. • 40 strokes per gallon.

415251 (33799-0000) • Marine engine oil drain pump with 3/4” female garden hose fitting on suction connection for OMC; and MerCruiser 3/4 NH Threaded Dip-Stick Tube. • Includes: 2’ of 1/2” hose.

415237 (34060-0130)

Jabsco Permanent Oil Drain Hose and Fitting

102

• Includes: Drain plug fitting, oil drain hose, cap and hose hanger clamp. • Ideal oil drain kit for use in conjunction with a 415275 (17215-0000) drill pump or 415249 (34060-0010) hand pump. • Drain plug fitting size is 1/2" - 20.

415299 (18080-0000)

• Includes: 2' of 1/2” hose and 40” of 1/2” dipstick probe. • 40 strokes per gallon.

415249 (34060-0010)

Oil Sorbents

Buffalo Industries Oil Sorbent Bilge Pillow • • • • •

100% polypropylene fill. Absorbs oil, fuel and hydrulic fluid. Ideal for bilges, sumps, drains and basins. Absorbs up to 1.75 gallons. Size: 9” x 15”.

461151 (90964)

Buffalo Industries Bilge Oil Booms • 100% polypropylene fill. • Absorbs oil, fuel and hydraulic fluid. • Ideal for bilges, sumps, drains and basins. • Absorbs up to 2.8 gallons. • Size: 19” x 6” diameter.

461145 (90405) • Absorbs up to 1.2 gallons. • Size: 15” x 5” diameter.

461150 (90400)

ITT Jabsco Oil Absorbing Bilge Pillow

415314 (340)

3M Petroleum Sorbent • For use in Hydrophobic (oil only) sorbent applications. • Help contain and control potentially dangerous spills of oil and gasoline…but repel water. • 3M sorbents go to work immediately so there’s less exposure to you and others and less risk to the environment.

461150

461145

Oil Mop Absorbent Spill Kit • Approximate absorption 95 to 115 gallons. • Contains the following: (1) Reuseable 55 gallon drum with lid. (6) 8" x 18" absorbent pillows. (50) 17" x 19" absorbent pads. (4) 5" x 10' absorbent boom. (8) 3" x 4' absorbent socks.

517219 517221 517233 517245 517257

Absorbent Spill Kit (OB510) Oil Absorb Boom - 5” x 10’ (OB810) Oil Absorb Boom - 8” x 10’ Pillows Oil Absorbent - 8” x 18” Socks Oil Absorbent

LUBRICATION

• Holds up to 2-1/2 quarts. • Biodegrades used motor oil, diesel fuel and transmission fluids. • Easily disposed of in trash- just place in zip-lock bag provided. • Environmentally safe and responsible. • Stainless steel fixing ring.

852459 (T156) Dimensions: 17” x 19” x 3/8” 852461 (HP156) Dimensions: 17” x 19” x 1/4”

103

Marpac Fuel/Water Separator Kits

Marpac Qwick View Filter Systems

NEW

• Qwick View is a new concept in fuel filtration, just replace the part that needs replacing. • Qwick Drain casing includes an easy-turn thumb screw for quick, convenient water drainage (Except 7-6856) and a red float that indicates water that needs to be drained. • Clear bowl on all Qwick View allow for quick checks on fuel quality, remove water or change filter before there is a problem. • 10 Micron filter cartridge is replaceable (Order # 7-6858). • Ethanol fuel compatible with Viton Seals that won’t shrink. • Universal replacement for Mercury, Yamaha, Honda and Suzuki Style filters. • Designed for use with Portable Marine Fuel Systems Only.

7-6854 7-6856 7-6858 7-6862 7-6864

Filter Assembly with Drain (No Head) Filter Assembly without Drain (No Head) Replacement Filter Nichronium Head Kit with Drain Composite Head Kit without Drain

Marpac Racor® Inside

NEW

• For all 2 & 4 Cycle engines. • High Efficiency 10 Micron Media filters out 99% of water and 98% of contaminates. • Maximum Media surface area for high dirt holding capacity. • Filter media sheds water instead of absorbing it. • E-10 Ethanol Compatible. • Clear bowl extends the life of the filter by allowing water to be drained from the fuel system. • 3/8” NPT ports provides high fuel flow. • Water collecting bowl is reusable. • Meets OEM specs. • For Portable Marine Fuel System Only. • Free pipe sealant included.

7-0842 With Stainless Steel Head 7-0846 With Composite Head 7-6879 With Nichronium Head

7-0844 7-6879 7-6864

Why Marpac Racor® Inside? Traditional filter media is made from paper which absorbs water. (Think of a coffee filter.) Marpac Racor® Inside actually sheds the water instead of keeping the water in the filter.

7-6862

Marpac Racor® Inside Fuel Filters 7-6858 FUEL & PLUMBING

104

• For all 2 & 4 Cycle engines. • High Efficiency 10 Micron Media filters out 99% of water and 98% of contaminates. • Maximum Media surface area for high dirt holding capacity. • Filter media sheds water instead of absorbing it. • E-10 Ethanol Compatible. • Replaces Quicksilver 35-60494-1. • For Vacuum (Suction Side) Applications. • U.S. Patent No. 4,692,245. • Water collecting bowl is reusable. • For portable marine fuel system only.

7-0843 Canister with Sight Bowl 7-0844 Repl. Canister 7-0845 Repl. Clear Bowl

Marpac Fuel/Water Separator Kits

Marpac Fuel/Water Separating Filter Kit with Racor Filter

Marpac Nichronium Filter Head Kit

• 10 Micron filtration ensures fuel arrives at the outboard engine(s) clean of contaminants & water. • Stainless steel filter head increases corrosion protection. • High flow filter head design with 3/8” NPT ports. • Clear contaminate collection bowl with drain valve included. • Can be used with all 2 & 4 stroke engines. • Kit includes: Universal Filter Head, Hose Barbs, Plugs, Thread Sealant, Clear Contaminate Collection Bowl and 10 Micron Water Separating Fuel Filter. • For portable fuel systems only.

• Nichronium head provides superior strength, corrosion resistance and the durability of stainless while remaining light like aluminum. • 10 Micron filtration ensures fuel arrives at the engine(s) clean of contaminates & water. • E-10 ethanol compatible. • Will not separate 2-cycle oil from gasoline. • High flow filter head designed with 3/8” NPT ports. • Can be used with all 2 & 4 stroke engines. • Kit includes Universal Filter Head, Hose Barbs, Plugs, Thread Sealant and 10 Micron Water Separating Fuel Filter.

Marpac Stainless Steel Head Fuel/Water Separator Kit • Stainless steel filter head delivers corrosion resistance. • High flow filter head design with 3/8” NPT ports. • 10 Micron filtration ensures fuel arrives at the outboard engine(s) clean of contaminants & water. • E-10 ethanol compatible. • Will not separate 2-cycle oil from gasoline. • Can be used with all 2 & 4 stroke engines. • Kit includes: Universal Filter Head, Hose Barbs, Plugs, Thread Sealant and 10 Micron Water Separating Fuel Filter.

7-0874 Stainless Steel Value Pack (2 Filters) 7-0878 Stainless Steel Bracket with Marpac Filter 7-0877B Stainless Steel Bracket Only

7-6874 Nichronium Value Pack (2 Filters) About Nichronium Nichronium Head Provides superior strength, corrosion resistance and the durability of stainless steel while remaining light like aluminum. P

Marpac Composite Head Fuel/Water Separating Kits • Composite filter head eliminates corrosion. • High flow filter head designed with 3/8” NPT ports. • 10 Micron filtration ensures fuel arrives at the engine(s) clean of contaminates & water. • E-10 ethanol compatible. • Will not separate 2-cycle oil from gasoline. • Can be used with all 2 & 4 stroke engines. • Kit includes: Universal Filter Head, Hose Barbs, Plugs, Thread Sealant and 10 Micron Water Separating Fuel Filter.

7-0858 Composite Value Pack (2 Filters) 7-0847 Composite Bracket with Marpac Filter 7-0859B Composite Filter Head Only

FUEL & PLUMBING

7-0879

NEW

105

Marpac Fuel/Water Separator Kits

Marpac Fuel/Water Separator Filter • 10 Micron filtration ensures fuel arrives at the engine(s) clean of contaminates & water. • E-10 ethanol compatible. • Will not separate 2-cycle oil from gasoline. • Can be used with all 2 & 4 stroke engines. • UNIVERSAL REPLACEMENT FILTER FOR: GLM 24940; Mallory 9-37801; Marine Power 0432-049; Marpac 7-0872; Mercury 35-60494-1, 35-8071272, 35-802893Q; Seachoice 2091; Sierra 18-7845; Volvo 855686-2; Yamaha ABA-FUEL-F-IL-TR. • For portable fuel systems only.

7-0860 Sold in Display Package 7-0860S Case of 50 Filters

Marpac E.Z. View Universal In-Line Fuel Filter • • • • • •

Superior filtering. Transparent housing. Fits all boats, cars & trucks using carbureted fuel systems. Easy do-it-your-self installation. Replaces any 1/4”, 5/16” and 3/8” inline filter. For portable fuel systems only.

7-0875 7-0876 Replacement Filter Elements

FUEL & PLUMBING

• Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out

106

• Works 24-7

Marpac MarPlate Fuel/Water Separating Kits • Exclusive MarPlate filter head material increases corrosion protection. • High flow filter head designed with 3/8” NPT ports. • 10 Micron filtration ensures fuel arrives at the engine(s) clean of contaminates & water. • E-10 ethanol compatible. • Will not separate 2-cycle oil from gasoline. • Can be used with all 2 & 4 stroke engines. • Kit includes: Universal Filter Head, Hose Barbs, Plugs, Thread Sealant and 10 Micron Water Separating Fuel Filter.

7-0873 MarPlate Value Pack (2 Filters) 7-0871 MarPlate Bracket with Marpac Filter 7-0870B MarPlate Bracket Only 7-0316 Male Hose Barb - 3/8” Hose x 3/8” NPT 7-0323 Male Hose Barb - 5/16” Hose x 3/8” NPT

Fuel/Water Separators

Sierra Fuel/Water Separator Filter and Bracket

Racor “ParFit” Gasoline Fuel Filter/Water Separator

• • • • •

• Replaces standard fuel filters found on most Mercury, Mercruiser, Yamaha, Suzuki, Honda and Tohatsu marine gasoline applications.

28 micron filter element shaped into 66 pleats. Meets OEM specifications. Will not separate 2 cycle oil from gasoline. Do not use with diesel fuel. Replaces: Mercury 35-60494A4, Suzuki 99105-20001, Yamaha ABA-SEPAR-AT-OR.

187852 187844 187845 187846

314795 (PFF5510)

(18-7852) (18-7844) Filter (18-7845) Long Filter (18-7846) OMC Filter

Sierra In-Line Fuel Filters 187829 (18-7829) Hose ID 1/4” 187830 (18-7830) Hose ID 5/16” 187831 (18-7831) Hose ID 3/8”

Racor OEM Spin On Gasoline Filter/Water Separators

• For Outboard Applications Only. • With clear bowl.

314447 (120R-RAC-01) 30 GPH, Head Port: 1/4”-18 NPTF 314523 (S3240) Replacement Filter 314497 (320R-RAC-01) 60 GPH, Head Port: 1/4”-18 NPTF 314516 (S3227) Replacement Filter 314465 (490R-RAC-01) 90 GPH, Head Port: 3/8”-18 NPTF With Integral Priming Pump

314498 (B32013) 314505 (S3213)

Fits 11/16”-16 Quicksilver Heads Replacement Filter

314499 (B32014) Fits 1”-12 OMC Heads 314506 (S3214) Replacement Filter 314502 (RK30747) Replacement Clear Bowl • For Inboard or Outboard Applications • With metal bowl. 60 GPH. 3/8” metal plug. • Height 6.5". Diameter 3.8".

314501 (B32020MAM) Fits 11/16”-16 MerCruiser Heads 314503 (S3220UL) Replacement Filter

FUEL & PLUMBING

Racor Spin On Gasoline Filter/Water Separators

• For Outboard Applications Only. • With clear bowl. 60 GPH. • Height 7.2". Diameter 3.8".

314504 (S3221UL) Repl. Filter for B32021MAM

314473 (660R-RAC-01) 90 GPH, Head Port: 3/8”-18 NPTF 314520 (S3232) Replacement Filter • For Inboard or Outboard Applications • With metal bowl. • UL Marine Listed.

314500 (320R-RAC-02) 60 GPH, Head Port: 1/4”-18 NPTF 314518 (S3228UL) Replacement Filter 314512 (RK30473-02) Metal Bowl Kit with Plug 314521 (S3232UL) Repl. Filter for 660R-RAC-02

107

Racor Fuel/Water Separators

Racor Diesel Spin On Fuel Filter/Water Separator • All units feature 1/4”-18 NPTF inlet and outlet fuel ports and a unitized mounting bracket. • Features spin on, high capacity Aquabloc II replaceable filter elements which stop water and remove solid contamination.

314435 (120AS) 15 GPH with 2 Micron Element 314814 (R12P) Replacement Filter - 30 Micron 314815 (R12S) Replacement Filter - 2 Micron

Racor In-Line Gasoline Filter/Water Separator • 25 GPH. Head port size 1/4”-18 NPTF.

314423 (025-RAC-02) 314515 (S2502) Replacement Filter

Racor Fuel Filter/Water Separator Dual Valve Turbine Series

• All units feature 1/4”-18 NPTF inlet and outlet fuel ports and a unitized mounting bracket. • They also include an in-head primer pump which allows the operator to hand prime the filter and simplifies service procedures. • Features spin on, high capacity Aquabloc II replaceable filter elements which separate water and remove solid contamination.

314459 (230R2) 30 GPH with 2 Micron Element 314827 (R20S) Replacement Filter - 2 Micron 314457 (230R30) 30 GPH with 30 Micron Element 314461 (245R2) 45 GPH with 2 Micron Element 314840 (R25S) Replacement Filter - 2 Micron

Racor Fuel Filter/Water Separators - Marine Turbine Series • 60 GPH. • Height 11.5". Width 5.8". Depth 4.8". • Standard fuel ports: 3/4"-16.

• Maxium flow rate 360/540 GPH. Height 22”. Width 21.5”. Depth 11.8”. Weight 52 lbs. Port size standard 3/4”-14.

314702 (500MA2)

314748 (791000MAV2)

• 90 GPH. Height 17". Width 6". Depth 7". • Standard fuel ports: 3/8"-14.

Racor Fuel Filter/Water Separators - Marine Turbine Series • 60 GPH. • Height 11.5". Width 5.8". Depth 4.8". • Standard fuel ports: 3/4"-16.

314696 (500FG2) FUEL & PLUMBING

• 90 GPH. • Height 17". Width 6". Depth 7". • Standard fuel ports: 7/8"-14.

314722 (900FH2) 2 Micron 314723 (900FH30) 30 Micron • 180 GPH. • Height 22". Width 6". Depth 7". • Standard fuel ports: 7/8"-14.

314684 (1000FH2) 2 Micron 314685 (1000FH30) 30 Micron

108

Racor Diesel Spin On Fuel Filter/Water Separator

314726 (900MA2) • 180 GPH. Height 22". Width 6". Depth 7". • Standard fuel ports: 3/8"-14.

314687 (1000MA2) • 120 GPH. • Height 11.5". Width 14.5". Depth 9.5". • Standard fuel ports: 3/4"-16.

314750 (75500MAX30) • 360 GPH. • Height 22". Width 18.8". Depth 11". • Standard fuel ports: 3/8"-14.

314752 (751000MAX2)

Racor Bowl Filter Wrench 314614 (22628)

Racor Fuel/Water Separators

Racor Accessories 314514 314716 314718 314721 314724 314728 314732 314733 314734 314735

(RK30488) (RK15279) (RK15211) (RK11341) (RK11028B) (RK11-1404) (RK11-1606) (11040) (11007) (RK11-1938)

Racor Replacement Filter Elements Self-Venting Drain See-Thru Bowl w/Water Probe Assy. Seal Service Kit Bowl Drain Gasket Kit Check Ball and Seal Seal Service Kit See-Thru Bowl w/Water Probe Fitting, Drain Gasket Replacement Bowl

Racor Replacement Filter for Mercury Engines • This filter fits Mercury outboard engines. • Legendary Aquabloc II, 2 micron filter media, removes up to 100% of free water and protects sensitive fuel system components from particulates. • Sold two filters per pack.

314510 (31871)

314524 314548 314560 314562 314583 314586 314598 314613 314618 314625 314803 314839 314841

(2000SM-OR) 2 Micron - For 200FG (2010TM-OR) 10 Micron - For 314702 & 314750 (2010PM-OR) 30 Micron - For 314702 & 314750 (2010SM-OR) 2 Micron - For 314702 & 314750 (2020PM-OR) 30 Micron - For 314687 & 314752 (2020TM-OR) 10 Micron - For 314687 & 314752 (2020SM-OR) 2 Micron - For 314687 & 314752 (2040TM-OR) 10 Micron - For 314726 (2040PM-OR) 30 Micron - For 314726 (2040SM-OR) 2 Micron - For 314726 (R11T) Filter Element for 314411 (R24S) Filter Element for (220) (R26S) Filter Element for (225)

Racor Pipe Fittings • For 500FG (MAX) Series.

Thread 1 3/4”-16 3/4”-16 3/4”-16

Thread 2 1/4”-18 3/8”-18 1/2”-14

Thread 1 314784 (913-08-H6) 3/4”-16 314786 (913-08-H8) 3/4”-16

Hose ID 3/8” 1/2”

314762 (911-08-F4) 314764 (911-08-F6) 314766 (911-08-F8)

Racor Vacuum/Compound Gauge Kit • T-handle vacuum gauge kit. • Includes: (1) Liquid filled vacuum gauge - 0-30 in. HG., lid fitting and O-ring.

314740 (RK11-1669)

Thread 1 314775 (911-010-F6) 7/8”-14 314776 (911-010-F8) 7/8”-14

Thread 2 3/8”-18 1/2”-14

Thread 1

Hose ID 1/2” 3/8” 1/2”

314780 (911-010-H6) 7/8”-14 314789 (913-010-H6) 7/8”-14 314791 (913-010-H8) 7/8”-14

FUEL & PLUMBING

• For 900FG (MAX) and 1000FG (MAX) Series.

Racor Vacuum Gauge Kit with Fittings • Includes gauge (RK11233) and 1 (7232-4) and 1 (7234-4) fitting instrument panel installation.

314741 (1606B)

109

Water Strainers

Groco ARG Series Water Strainers

Groco SA Series Water Strainers

• #304 stainless steel filter basket. • Bronze castings. • Buna-N O-ring seals.

373011 373023 373035 373037 373039

(ARG-750-S) Pipe 3/4” (ARG-1000-S) Pipe 1” (ARG-1250-S) Pipe 1-1/4” (ARG-1500-S) Pipe 1-1/2” (ARG-2000-S) Pipe 2”

Model 373009 373011 373023 373035 373037

• #304 stainless steel filter basket with clear sight glass. • Monel inside tie rod. • Naval bronze outside tie rods. • Single bronze wingnut spins off for easy access to filter basket.

(ARG-500-S) (ARG-750-S) (ARG-1000-S) (ARG-1250-S) (ARG-1500-S)

Basket, S/S

Repair Kit*

N/A 373124 373136 373148 N/A

N/A N/A 373097 373097 N/A

373388 (SA-1500-S) Pipe 1-1/2” 373390 (SA-2000-S) Pipe 2” Wingnut for 373364 & 373376 373720 (S-75) Model

* Repair kit includes: Sight glass O-ring, cap O-ring, O-ring & washer.

(SA-1000-S) (SA-1250-S) (SA-1500-S) (SA-2000-S) (SA-2500-S)

Cylinder

Repair Kit*

N/A 373530 373542 373554 373566

N/A N/A N/A 373631 N/A

373453 373453 373465 373465 373465

Groco SD Series Water Strainers

* Repair kit includes: Sight glass O-ring, cap O-ring, O-ring & washer.

• • • •

Groco SE Series Large Engine Water Strainers

Stainless steel filter basket with clear sight glass. Monel inside tie rod. Naval bronze outside tie rods. Bronze wingnut spins off for easy access to filter basket.

373908 373910 373922 374075 374087 374099 374126

(SD-2000-S) (SD-2500-S) (SD-3000-S) (S-85) (SD-14) (SD-16) (SD-20B)

Pipe 2” Pipe 2-1/2” Pipe 3” Wingnut Strainer Cap End Cap Outside Tie Rod for 373922

Model

Basket, S/S

Cylinder

Repair Kit*

373908 (SD-2000-S) 373910 (SD-2500-S) 373922 (SD-3000-S)

373960 373972 373984

N/A N/A 374025

373946 373946 373946

* Repair kit includes: Sight glass O-ring, cap O-ring, O-ring & washer. FUEL & PLUMBING

110

373364 373376 373388 373390 373403

Basket, S/S

• • • • • •

For high power engines with 4", 5" or 6" intake. No inside tie rods. O-rings seal all mating surfaces. Bronze castings. Lucite sight glass. Stainless steel filter basket.

• Model SE Series. • Pipe connection: 4” NPT.

373934 (SE-4000) • Model SEF Series. • Pipe connection: 4” flange.

373939 (SEF-4000) 373950 Repair Kit 373951 Cap 373959 (SE-400B-1) Stainless Steel Basket

373934

373939

Water Strainers

Groco VD Series Vertical Duplex Water Strainer

Perko Fig. 493 Intake Water Strainers

• • • • • •

• Cast bronze. • Features include mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 304 stainless steel strainer basket.

374152 (VD-2000-S)

538946 538958 538960 538972 538984 538996 539001

(493 004) (493 005) (493 006) (493 007) (493 008) (493 009) (493 010)

Model

Perko Fig. 693 Heavy Duty Intake Water Strainer for 4” Pipe • Cast bronze. • Features include mounting lugs cast into both sides to assure universal mounting, four outside stainless steel tie rods and nuts. • A 316 stainless steel strainer basket to minimize electrolysis. • Acrylic cylinder. • Tested and accepted for labeling and UL listed. • Pipe Size: 4". • Cylinder: 8-3/4" x 12". • Basket: 6-3/4" x 8-5/8". • Height 17-1/2". • Width 16-1/2". • Weight: 122 Lbs. • Ratio: 10:1.

538946 538958 538960 538972 538984 538996 539001

(493 004) (493 005) (493 006) (493 007) (493 008) (493 009) (493 010)

Pipe 1/2” Pipe 3/4” Pipe 1” Pipe 1-1/4” Pipe 1-1/2” Pipe 2” Pipe 2-1/2”

Cylinder

Basket

Hinged Bolt Cover/Gasket

N/A N/A N/A N/A N/A 539075 539075

N/A 539095 539102 539114 539126 539138 539140

539377 539377 539378 539378 539379 539379 539379

539291 539291 539316 539316 539328 539328 539328

Perko Fig. 500 Heavy Duty Intake Water Strainer • Cast bronze. • Features include mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 304 stainless steel strainer basket to minimize electrolysis. • Tested and accepted for labeling and UL listed. • Pipe 3". • Cylinder 8" x 14". • Height 18-1/2". • Width 9".

539506 (500 011) 539520 (500 011 99D) Basket Strainer FUEL & PLUMBING

Stainless steel filter basket with clear sight glass. Monel inside tie rods. Naval bronze outside tie rods. Bronze wingnuts spin off to allow access to the filter baskets. Buna-N O-ring seals. Available in 2" pipe size.

539556 (693 012 PLB)

111

Water Strainers

Bronze Scoop Strainers

Groco Navy Pump Strainers

• Bronze. • Converts standard thru-hull to high speed intake strainer.

• Aluminum. • Dimensions: 3-1/2" x 5". • Complete with cast aluminum screens.

256633 (SS-500) Thru-Hull 3/4” 256645 (SC1000L) Thru-Hull 3/4” and 1” 256669 Thru-Hull 2”

256873 (20NPSB150) For 1-1/2” Pipe Nipples 256873 (20NPSB200) For 2” Pipe Nipples

NEW Buck-Algonquin Intake Water Strainer - Adjustable • • • • • •

Bronze. Diameter 6". Overall height 4-1/2". Hose 1-1/2". Tapped for 1" pipe. Clear plexiglass top.

257229 (IWS-3)

• Bronze. • NPT thru-hull fitting with integral scoop strainer.

Replacement Gasket

Buck-Algonquin Rectangular Scoop Strainers • Cast bronze. • Slide-out removable screens.

256708 256710 256709 256711 FUEL & PLUMBING

112

Groco Bronze Intake Strainers

(RSS655P) Dim.: 10-5/16” L x 4-5/8” W (RSS1100P) Dim.: 12-3/4” L x 5-7/8” W (RSS655PS) Screen Only for 256708 (RSS1100PS) Screen Only for 256710

256734 256746 256758 256772 256784 256785

(STH500W) (STH750W) (STH1000W) (STH1250W) (OOIS150) (OOIS200)

Pipe 1/2” Pipe 3/4” Pipe 1” Pipe 1-1/4” Pipe 1-1/2” Pipe 2”

Buck-Algonquin Rectangular Scoop Strainer • Cast bronze. • Type: Perforated. • Max. thru hull: 2-1/2".

256683 (RSS650P)

Water Strainers

Shurflo Raw Water Strainer

Forespar Water Strainer

• Features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. • An integral o-ring creates a tight seal, eliminating possible leaks.

• Molded in high strength glass reinforced “Marelon” for superior corrosion protection. • Intake and exit ports are 1-1/2" threads standard. • The flow rate is 40 GPM.

375190 (253-220-01) Inlet/Outlet Ports: 3/4” NPT-F 375205 (253-400-01) Inlet/Outlet Ports: 1-1/4” NPT-F

353401 (906066)

Jabsco “Pumpgard” In-Line Strainer • Transparent inspection housing. • Slip-on ports 3/4” ID hose

414350 (36200-0000)

Raritan Raw Water Strainer • Trash and waterflow can be monitored through this clear plastic body. • Inlet and outlet 1-1/2" NPT female pipe thread.

Buck-Algonquin Black Polyethylene Strainers 256722 (TSS-25) 256735 (TSS-35)

564268 (RWS)

Size 2” Size 3”

Water Gauge

Conbraco Bronze Water Gauge • Ball checks standard. • Equipped with two copper guard rods. • Standard 1/4” needle drain valve in lower arm. • 5/8” - 1/2” pipe. FUEL & PLUMBING

312948 (20-150-03)

NEW

113

Thru-Hull Connectors

Marpac Thru-Hull Connectors • Stainless steel.

7-0855 Hose ID 3/4” Flange OD 1-3/4” Length 3-3/4” 7-0856 Hose ID 1-1/8” Flange OD 2-1/4” Length 4” 7-0857 Hose ID 1-1/2” Flange OD 3” Length 4-1/4”

Marpac Thru-Hull Connectors • All nylon thru-hull with stainless steel outside cover.

7-0848 Hose ID 3/4” Flange OD 1-7/8” Length 3-7/16” 7-0850 Hose ID 1-1/8” Flange OD 1-7/8” Length 3-7/16” 7-0852 Hose ID 1-1/2” Flange OD 2-3/8” Length 4-1/16”

T-H Marine Extended Length Thru-Hull Connectors - Plastic • Hose ID 1-1/2". Length 3-1/4". Maximum hull thickness 1-1/4". Flange diameter 2-7/8".

641414 (TH-1502) • Hose ID 3/4". Length 4-1/2". Maximum hull thickness 2". Flange diameter 1-3/4".

• Molded plastic. • Note: These thru-hulls for hose are not recommended for use below the waterline.

7-0357 Hose ID 1/2” 7-0358 Hose ID 5/8” 7-0359 Hose ID 3/4” 7-0359S Hose ID 3/4” 7-0360 Hose ID 1” 7-0363 Hose ID 1-1/8” 7-0365 Hose ID 1-1/2” 7-0354 Hose ID 3/4” 7-0356 Hose ID 1-1/8”

Flange OD 1-1/2” Length 1-1/4” White Flange OD 1-1/2” Length 1-1/4” White Flange OD 1-7/8” Length 1-7/16” White Bucket of 24 Flange OD 2-1/4” Length 1-1/2” White Flange OD 2-1/4” Length 1-1/2” White Flange OD 3”

Length 1-7/8” White Black Black

Marpac 90° Thru-Hull Connectors • Molded white plastic. • Note: These thru-hulls for hose are not recommended for use below the waterline.

7-0361 Hose ID 5/8” 7-0362 Hose ID 3/4” 7-0364 Hose ID 1-1/8”

Forespar Thru-Hull Connectors - Plastic

642024 (TH-752XL)

• For connection to seacox, ball valves or hose. • Molded in high strength glass reinforced “Marelon”.

• Hose ID 1-1/8" and 1-1/4". Length 3-3/8". Maximum hull thickness 3-1/8". Flange diameter 1-7/8".

• 250 Series Thru-Hull Connectors. • Full threaded/flush head.

642062 (TH-1202XL)

353526 (906004) 1” Thread 353538 (906006) 1-1/4” Thread

• Hose ID 1-1/2". Length 5-3/8". Maximum hull thickness 3-1/4". Flange diameter 2-7/8".

641427 (TH-1502XL)

FUEL & PLUMBING

T-H Marine Directional Livewell Fill Fitting • • • •

Protects delicate bait. Provides directional current. 90° design. Allows full flow from pump. 3/4” barb.

642188 (TH-DFR7590) Black

114

Marpac Thru-Hull Connectors

Length 2-3/8” Length 3”

• 251 Series Thru-Hull Connectors. • Full threaded/mushroom head.

353588 353589 353590 353603

(906012) 3/4” Thread (906014) 1” Thread (906016) 1-1/4” Thread (906018) 1-1/2” Thread

Length 2-1/4” Length 2-3/8” Length 3” Length 3”

• 253 Series Thru-Hull Connectors. • Hose tailpipe/mushroom head.

353639 353641 353653 353665 353677

(906022) Hose ID 1/2” - 5/8” (906024) Hose ID 3/4” (906026) Hose ID 1” (906028) Hose ID 1-1/4” (906030) Hose ID 1-1/2”

Thru-Hull Connectors

Groco Thru-Hull Connectors

Groco Extra Long Thru-Hull Connectors

• Cast bronze.

256443 256455 256479 256493 256506 256518

(TH500W) (TH750W) (TH1000W) (TH1250W) (TH1500W) (TH2000W)

Pipe 1/2” Pipe 3/4” Pipe 1” Pipe 1-1/4” Pipe 1-1/2” Pipe 2”

Flange OD 1-1/2” Flange OD 1-7/8” Flange OD 2-3/16” Flange OD 2-3/4” Flange OD 3” Flange OD 3-5/8”

256557 256568 256571 256583

(THXL750W) (THXL1000W) (THXL1250W) (THXL1500W)

Pipe 3/4” Pipe 1” Pipe 1-1/4” Pipe 1-1/2”

Flange OD 1-7/8” Flange OD 2-1/4” Flange OD 2-3/4” Flange OD 3”

Seacocks, Gate Valves and Ball Valves

Marpac Stainless Steel Ball Valves

Conbraco “Apollo” Ball Valves

• • • •

• Bronze with threaded ends. • Series 70-100 features chromium plated ball, reinforced teflon seats and stuffing box ring, blow-out-proof stem design, stainless steel lever and nut. • Rated to 600 PSI.

316 investment cast stainless steel. Bonding screw hole included. Tested to 1000 psi WOG. NPT threading.

3/4” 1” 1-1/4” 1-1/2” 2”

NEW

Conbraco “Apollo” Full Flow Seacocks • Bronze ball type valve. • UL listed.

312950 312962 312974 312986 312998

313003 313015 313027 313039 313041 313053 313065 313089 313091

(70-102-10) (70-103-10) (70-104-10) (70-105-10) (70-106-10) (70-107-10) (70-108-10) (W565700) (W565800)

3/4” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT Spare S/S Lever - 3/4” to 1” Spare S/S Lever - 1-1/4”

(78-115-01F) 3/4” Thread (78-118-01) 1” Thread (78-119-01) 1-1/4” Thread (78-116-01F) 1-1/2” Thread (78-120-01) 2” Thread

Forespar Ball Valves • Molded in high strength glass reinforced “Marelon”. • Ideal for controlling water requirements above or below the waterline.

354136 (905101) 3/4” NPT 354148 (905102) 1” NPT 354162 (905104) 1-1/2” NPT

FUEL & PLUMBING

7-2240 7-2241 7-2242 7-2243 7-2244

Groco Ball Valves • Patent-pending field-changeable handle rotation enables installation in tight spaces. • Stainless steel handle and stem.

375231 375242 375258 375268 375278 375281

(IBV-500) (IBV-750) (IBV-1000) (IBV-1250) (IBV-1500) (IBV-2000)

1/2” 3/4” 1” 1-1/4” 1-1/2” 2”

115

Pipe Fittings

Bronze Pipe Tees

Bronze Pipe Locknuts

467844 467856 467868 467870 467882 467894 467907 467919 467921

467767 467781 467793 467806 467807 467820 467832

1/8” NPT 1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

Bronze Pipe Reducing Couplings 467402 467414 467438 467440 467452 467464 467476 467478

1/4” x 1/8” NPT 3/8” x 1/4” NPT 1/2” x 3/8” NPT 3/4” x 1/2” NPT 1” x 3/4” NPT 1-1/4” x 1” NPT 1-1/2” x 1-1/4” NPT 2” x 1-1/2” NPT

Bronze Pipe Plugs 467591 467604 467616 467628 467630 467642 467654 467658 467660

1/8” NPT 1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

FUEL & PLUMBING

Bronze 90° Pipe Street Elbows 467250 467262 467274 467286 467298 467301 467313 467315

116

1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

1/4” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

Bronze Pipe Couplings 467325 467337 467349 467351 467363 467375 467387 467389 467399

1/8” NPT 1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

Bronze Pipe Bushings 467488 467490 467515 467527 467539 467540 467541 467542 467560 467565 467577 467589 467568 467503 467573 467590

1/4” x 1/8” NPT 3/8” x 1/8” NPT 3/8” x 1/4” NPT 1/2” x 1/4” NPT 1/2” x 3/8” NPT 3/4” x 1/4” NPT 3/4” x 1/2” NPT 3/4” x 3/8” NPT 1” x 1/2” NPT 1” x 3/4” NPT 1-1/4” x 3/4” NPT 1-1/4” x 1” NPT 1-1/2” x 1” NPT 1-1/2” x 1-1/4” NPT 2” x 1-1/4” NPT 2” x 1-1/2” NPT

Bronze 90° Pipe Elbows

Brass Pipe Nipples

467084 467096 467109 467111 467123 467135 467147 467159 467160

466640 466641 466652 466688 466689 466690 466693 466703 466727 467739 467741 467743 467777 467791 467792 467804 467806 467816 467820 467830 467831 467842 467854 467866 467867 467880 467892 467905 467917 467931 467936 467944 467979 467980 467993 467008 467011 467034 467036 467038 467042 467045 467046 467053 467054 467055

1/8” NPT 1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

Bronze 45° Pipe Elbows 467161 467173 467185 467197 467205 467212 467214 467216 467218

1/8” NPT 1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

Bronze Pipe Unions 468012 468024 468036 468048 468050 468062

1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

Bronze Pipe Caps 467678 467705 467717 467729 467731 467734 467738

1/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

1/8” NPT 1/8” NPT 1/8” NPT 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPT 1/2” NPT 1/2” NPT 1/2” NPT 1/2” NPT 1/2” NPT 1/2” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 1” NPT 1” NPT 1” NPT 1” NPT 1-1/4” NPT 1-1/4” NPT 1-1/4” NPT 1-1/4” NPT 1-1/4” NPT 1-1/2” NPT 1-1/2” NPT 1-1/2” NPT 1-1/2” NPT 1-1/2” NPT 1-1/2” NPT 2” NPT 2” NPT 2” NPT 2” NPT 2” NPT 2” NPT

Close Length 1-1/2” Length 2” Close Length 1-1/2” Length 2” Length 3” Length 4” Close Length 1-1/2” Length 2” Length 3” Length 4” Close Length 1-1/2” Length 2” Length 3” Length 4” Length 5” Close Length 1-1/2” Length 2” Length 3” Length 4” Length 6” Close Length 2” Length 3” Length 4” Close Length 2” Length 3” Length 4” Length 5” Close Length 2” Length 3” Length 4” Length 5” Length 6” Close Length 2-1/2” Length 3” Length 4” Length 5” Length 6”

FUEL & PLUMBING

Pipe Fittings

117

Pipe to Hose Adapters, 90° Elbows and Tailpipes

Groco Full Flow Pipe to Hose Adapters • Cast bronze. • Full pipe size flow provides an unrestricted passage through the fitting. • Enough barb area for double hose clamps. • Generous hex nut cast in for secure tightening. Straight Hose Barb

371219 371221 371233 371245 371257

(FF-750) (FF-1000) (FF-1250) (FF-1500) (FF-2000)

3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

• NPT to hose.

371207 542046 542058 542060 542072 542084

(5062) (PTH750) (PTH1000) (PTH1250) (PTH1500) (PTH2000)

1/2” 3/4” 1” 1-1/4” 1-1/2” 2”

Bronze Pipe to Hose Adapters • Curved 90°.

90° Hose Barb

371269 371271 371283 371295 371308

Bronze Pipe to Hose Adapters

(FFC-750) (FFC-1000) (FFC-1250) (FFC-1500) (FFC-2000)

541323 541335 541347 541359

3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT

(PTHC750) Hose 3/4” (PTHC1000) Hose 1” (PTHC1125) Hose 1-1/8” x 1-1/4” NPT (PTHC1500) Hose 1-1/2”

Forespar Tailpipes • Molded in high strength glass reinforced “Marelon” for superior corrosion protection.

354201 354213 354225 354237 354349

(905006) (905007) (905008) (905009) (905010)

1/2” IPT 3/4” IPT 1” IPT 1-1/4” IPT 1-1/2” IPT

Hose ID 5/8” Hose ID 3/4” Hose ID 1” Hose ID 1-1/4” Hose ID 1-1/2”

Forespar Tailpipes • Molded in high strength glass reinforced “Marelon” for superior corrosion protection.

354465 (910156) 1/2” Thread 354477 (910157) 1/2” Thread FUEL & PLUMBING

Marpac Garboard Dain Plugs • • • •

118

Cast bronze. 1/2" IPS pressure. Flange OD 2". Depth 5/8".

7-0322

Forespar 90° Elbows • Molded in high strength glass reinforced “Marelon” for superior corrosion protection.

354263 354275 354287 354299 354302

(901000) (901001) (901002) (901003) (901004)

1/2” IPT 3/4” IPT 1” IPT 1-1/4” IPT 1-1/2” IPT

Tube ID 1/2” Tube ID 3/4”

Swing Check Valves 485573 3/4” NPT 485585 1” NPT 485597 1-1/4” NPT

Hose ID 5/8” Hose ID 3/4” Hose ID 1” Hose ID 1-1/4” Hose ID 1-1/2”

Vented Loops and Y-Valves

Forespar Vented Loops for Waste Line

Groco Vented Loop

• Molded in glass reinforced Marelon.

• All bronze construction. • Suitable for engine exhaust system installations or sanitation system installations.

353425 (903001) Barb 3/4” 353437 (903000) Barb 1-1/2”

375103 (HVL-1000) Hose ID 1”

Forespar 1-1/2” Y-Valve

Jabsco 1-1/2” Y-Valve

353451 (902000)

415201 (45490-1000)

Toilet Service Kits and Replacement Parts

Jabsco Repair Kit and Replacement Parts

Jabsco Service Kits

• For Jabsco electric marine toilets 414956 (37010-0090) and 414970 (37010-1090).

414920 (29045-0000) For Pre-1997 Units 414932 (29045-2000) For 1998 and Up Units

• For Jabsco manual marine toilet 414906 (29090-2000).

415011 (37040-0000) Seal and Gasket Service Kit 415023 (37041-0010) Repl. 12V Pump Assembly 415035 (37064-0000) Repl. Motor - 12 Volt

Water Products

Camco Fresh Water Dewinterizer • For use with boats or RVs coming out of storage. • Just one bottle freshens and deodorizes your Fresh Water System from tank to tap. • Treats up to 60 gallons.

583155 (40218) 16 fl. oz.

NEW

Camco TastePure™ Drinking Water Freshener

• Eliminate algae and slime buildup from drinking water tanks. • Just one ounce helps remove bad smells and taste from 20 gallons of water.

NEW

FUEL & PLUMBING

583701 (40208) 16 fl. oz.

Marpro CSS Toilet Treatment • • • • • •

Ultra-concentrated formula. Safe for marine applications. Stops odors up to 7 days. Formaldehyde free. 100% Biodegradable. Requires just two ounces per 40 gal.

7-2728 32 fl. oz.

119

Marpac Fuel Assemblies

Marpac Premier Fuel Line Assemblies

NEW

Marpac Fuel Line Assemblies

• Meets EPA low permeation mandates and the stringent requirements of SAE J1527 B1-15 and ISO 8469. • Ethanol resistant. • Kink-free performance. • Rapid prime with dual big bore check valves. • Viton and stainless steel components for greater longevity and better prime every time. • Stainless steel clamps. • Special blue bulb stays pliable even in cold weather. • Available with color coded connectors where applicable.

• • • • • •

• Johnson, Evinrude, BRP replaces OEM #398549.

7-6825

7-6802

• Mercury Clip Style.

• Mercury Bayonet Style with cast aluminum fittings, replaces OEM #32-80188A 2

7-6826

7-6805 • Mercury Clip Style.

7-6806 • Yamaha, replaces OEM #6Y2-24306-05-00.

7-6808

NEW

Meets EPA low permeation mandates. Ethanol resistant, 3/8” double walled hose. E10 and E85 compatible. Kink-free performance. Double check valves. Stainless steel clamps.

• Johnson, Evinrude and BRP.

7-6822 • Mercury Bayonet Style Connectors.

• Yamaha.

7-6828 • Universal.

7-6829 • Universal, extra long.

7-6830

• Universal fit end assembly.

7-6809 • Universal fit end assembly, extra long.

7-6810

FUEL & PLUMBING

Marpac Premier Fuel Line Assemblies

Marpac Fuel Line Assemblies

• Specifically designed for use with Ethanol E10 and E85 fuel blends. • Works with both gasoline or diesel fuels. • Rapid prime with dual big bore check valves. • Viton balls and stainless steel springs for greater longevity and better prime every time. • Stainless steel clamps. • Special blue bulb stays pliable even in cold weather.

• • • •

7-6908 Yamaha 7-6905 Mer Bayonet Style w/Cast Alum. Fittings 7-6909 Universal Fit End Assembly

120

Gasoline and alcohol resistant 3/8” double walled hose. Double check valves. Kink free braid fuel line. Outer hose is flexible and provides UV protection to prevent cracking and drying. • Stainless steel clamps.

7-0902 7-0908 7-0905 7-0909

Johnson, Evinrude, BRP, 8’ Hose Yamaha, 8’ Hose Mercury Bayonet Style Conn., 8’ Hose Universal, 12’ Hose

Marpac Primer Bulbs

Marpac Premier Primer Bulbs

Marpac Uniflow Primer Bulbs

• Alcohol and gasoline resistant. • Spring loaded, over sized uniflow check valves for quick prime. • Double check valves to hold prime longer. • Stainless steel clamps.

7-6928 3/8” 7-6932 5/16”

7-0928 3/8” 7-0930 1/4” 7-0932 5/16”

Marpac Fuel Premier Connectors

Marpac Premier Johnson, Evinrude (BRP) Connectors 7-6910 Male Tank 7-6911 Red Female Fuel Line 7-6912 Red Female Fuel Line

1/4” NPT 5/16” Barb 3/8” Barb

Marpac Premier Yamaha Connectors 7-6924 Male Tank - Brass 7-6925 Female 7-6926 Female

1/4” NPT 5/16” Barb 3/8” Barb

7-6924 7-6926 7-6910 7-6912

Marpac Premier Honda Connectors

7-6898 Male Tank 7-6896 Female Fuel Line Fitting

1/4” NPT 3/8” Barb

7-6888 Male Tank 1/4” NPT 7-6886 Female Fuel Line Fitting 3/8” Barb 7-6890 Female - Gray Square Peg Hole 3/8” Barb

7-6886 7-6896

7-6888

FUEL & PLUMBING

Marpac Premier Tohatsu Connectors

7-6898

7-6890

121

Marpac Fuel Connectors

Marpac Yam/Mer/Mariner Connectors 7-0924 Male Tank - Brass 7-0925 Female 7-0926 Female

1/4” NPT 5/16” Barb 3/8” Barb

Marpac Johnson, Evinrude (BRP) Connectors 7-0910 Male Tank - Brass 7-0911 Female Fuel Line 7-0912 Female Fuel Line

1/4” NPT 5/16” Barb 3/8” Barb

7-0924 7-0925

7-0910 7-0912

Marpac Suzuki Connectors 7-0933 Male Tank (Small) 7-0935 Female Fuel Line (Small)

1/4” NPT 5/16” Barb

7-0933

Marpac Fuel Valves

Marpac Shut-Off Valves

Marpac 3-Way Valves

• Brass. • Connects motor to one permanent tank.

• Brass. • Connects motor to two permanent tanks. • Withdrawals from one tank at a time.

7-6940 1/4” NPT x 1/4” FNPT 7-6942 1/4” FNPT

7-6940

7-6944 1/4” FNPT 7-6946 1/4” FNPT - With Easy Clicks 7-6948 3/8” FNPT

7-6942

Marpac 4-Way Valve FUEL & PLUMBING

Marpac 2-Way Brass Ball Valve

• Brass. • Connects motor to three permanent tanks. • Withdrawals from one tank at a time.

• Made of brass with stainless steel screw stem. • 1/4" MNPT x 3/8" barb.

7-6950 1/4” FNPT

7-6938

122

Marpac Fuel Accessories

Marpac Fuel Hose Barbs

Marpac Fuel Elbow

• Female Thread.

• Solid machined brass. • Excellent for use in tight spaces.

7-0937 1/4” NPT 7-0938 1/4” NPT

Hose ID 1/4” Hose ID 5/16”

7-1646 7-1647 7-1648 7-1649

• Male Thread.

7-0307 7-0308 7-0313 7-0314 7-0315

1/8” NPT 1/8” NPT 1/4” NPT 1/4” NPT 1/4” NPT

Hose ID 5/16” Hose ID 3/8” Hose ID 1/4” Hose ID 5/16” Hose ID 3/8”

NEW

1/4” NPT x 5/16” Barb 1/4” NPT x 3/8” Barb 3/8” NPT x 5/16” Barb 3/8” NPT x 3/8” Barb

Male Thread Female Thread

Marpac Hose Splicers • Machined brass.

Marpac Elbow Male/Female

7-0318 Hose 5/16” 7-0319 Hose 3/8”

• Brass. • 1/4” NPT.

Marpac Straight Bulk Head Fitting

Marpac Fuel Pick-Ups • Rigid polyethylene fuel tube is formulated for today's fuels. • 1/4” NPT aluminum fitting. • 3/8” I.D.

7-0947 Length 12” 7-0948 Length 24”

NEW

• Brass. • Ideal for routing fuel lines safely through motor wells or bulk heads. • 3/8" to 3/8" hose ID.

7-0306

Marpac Tank Vent • Brass. • For use in attaching 5/8" ID vent hose to the fuel tank for thru hull ventilation. • 3/8" NPT.

7-0310

FUEL & PLUMBING

7-0320

Marpac Tank Vent Elbow • Brass. • Designed for use with the tank vent where vertical space is limited. • 3/8" NPT and replaces 3/8" plug on fuel tanks.

7-0321

123

Marpac Hose

Marpac Bilgeflex Hose

Marpac RNF Bilgeflex Hose

• Heavy corrugated polyethylene construction with custom molded cuff every foot for easy installation and clamping. • Excellent flexibility. Ideal for electric and manual bilge pumps and livewell aerators. • Resists heat, cold, sea water, ozone and oily bilge acids. • Quality tested for marine applications.

• Smooth, clear PVC tube with black PVC helical rod. • Excellent flexibility and bend radius. • For use in bilge pump discharge, livewell circulation and scupper drains.

7-2755 3/4” x 10’ 7-2760 1-1/8” x 10’

Marpac Type “B” Fuel Hose • Premium quality tube and cover with braided reinforcement. • Resists vapor permeation, heat, cold, ozone and premature aging caused by gas. • For use in outboard engine applications.

7-2800 3/8” x 10’ 7-2805 5/16” x 10’

Marpac Type “B” Fuel Hose

FUEL & PLUMBING

• Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility. • Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcoholenhanced fuels. • Meets or exceeds all requirement of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H-24 & H-33) and NMMA.

7-2810 7-2815 7-2820 7-2825

124

3/8” x 10’ 5/16” x 10’ 5/8” x 5’ 5/8” x 10’

7-2770 3/4” x 10’ 7-2775 1-1/8” x 10’

Marpac RNF PVC Hose • Heavy duty clear vinyl non-toxic reinforced tubing with red and blue tracers. • Made with FDA approved compound. • Excellent for use with potable water.

7-2785 1/2” x 15’ 7-2790 3/4” x 15’

Marpac Blower Hose • • • •

For use in venting bilge gases and fumes. Strong, flexible construction of wire supported vinyl. Resistant to ozone, weather, and sunlight. Will not support a flame.

7-2835 3” x 10’

MPI Products Water System Hoses

MPI Products Series 100 Hardwall Water Hose

MPI Products Series 110 Softwall Water Hose

• Sold in 12-1/2’ lengths.

770001 770013 770025 770037 770049 770051

(100-0584) (100-0344) (100-1004) (100-1184) (100-1144) (100-1384)

770304 770316 770328 770330 770342 770354

5/8” 3/4” 1” 1-1/8” 1-1/4” 1-3/8”

(110-0584) (110-1344) (110-1004) (110-1184) (110-1144) (110-1384)

5/8” 3/4” 1” 1-1/8” 1-1/4” 1-3/8”

MPI Products Series 120 Standard Bilge Hose

MPI Products Series 132 Heavy Duty Water/Heater Hose

• Sold in 50’ lengths.

770633 770657 770671 770683 770708 770645 770544 770556 770568

(120-0586) (120-0346) (120-1186) (120-1146) (120-1126) (120-0341) (121-0346) (121-1146) (121-1126)

5/8” 3/4” 1-1/8” 1-1/4” 1-1/2” 3/4” x 6’ 3/4” 1-1/4” 1-1/2”

Black Black Black Black Black Black White White White

770619 (132-0586) 770621 (132-0346)

5/8” 3/4”

MPI Products Series 141 PVC Bilge VAC Hose • Sold in 50’ lengths.

MPI Products Series 148 Premium PVC Sanitation Hose/FDA

770722 (141-0346) 770734 (141-1186) 770746 (141-1126)

3/4” 1-1/8” 1-1/2”

• Sold in 10’ lengths.

770730 (141-1183)

1-1/8”

771407 771419 771421 771433 771445

(148-0346) (148-1006) (148-1186) (148-1146) (148-1126)

3/4” 1” 1-1/8” 1-1/4” 1-1/2”

FUEL & PLUMBING

• Sold in 50’ lengths.

White White White White White

125

MPI Products Water System Hoses

MPI Products Series 149 Heavy Duty PVC Livewell Hose - Black • Sold in 50’ lengths.

771560 (149-0346) 771562 (149-1186) 771563 (149-1126)

3/4” 1-1/8” 1-1/2”

MPI Products Series 162 Clear Reinforced PVC Tubing - Red and Blue Tracer • Sold in 50’ lengths.

770900 770912 770924 770936 770948 770950 770962 770974

MPI Products Series 150 Clear PVC Tubing

(162-0386) (162-0126) (162-0586) (162-0346) (162-1006) (162-1186) (162-1146) (162-1126)

3/8” 1/2” 5/8” 3/4” 1” 1-1/8” 1-1/4” 1-1/2”

• Sold in 50’ lengths.

770760 770772 770784 770796 770809

(150-0386) (150-0126) (150-0586) (150-0346) (150-1006)

3/8” 1/2” 5/8” 3/4” 1”

MPI Products Series 164 White Reinforced PVC Tubing - Blue Tracer • Sold in 50’ lengths.

770998 (164-0126) 771003 (164-0586) 771015 (164-0346)

1/2” 5/8” 3/4”

MPI Products Speedometer Pitot Tubing

MPI Products Speedometer Pitot Tubing • Sold in 100’ lengths. FUEL & PLUMBING

772207 (151-0407)

MPI Products Vent Hose

MPI Products Series 400 Blower Vent Hose

126

771609 771610 771611 771623

(400-3003) (400-4003) (400-3000) (400-4000)

3” x 10’ Package 4” x 10’ Package 3” x 50’ Box 4” x 50’ Box

MPI Products Exhaust System Hoses

MPI Products Series 200 Softwall Marine Exhaust Hose

MPI Products Series 250 Hardwall Marine Exhaust Hose

• Sold in 12-1/2’ lengths.

770366 770378 770380 770392 770405 770418 770429 770431 770443 770455 770479 770481 770493 770518

(200-1124) (200-1584) (200-1344) (200-1784) (200-2004) (200-2144) (200-2384) (200-2124) (200-2784) (200-3004) (200-3124) (200-4004) (200-4124) (200-6004)

1-1/2” 1-5/8” 1-3/4” 1-7/8” 2” 2-1/4” 2-3/8” 2-1/2” 2-7/8” 3” 3-1/2” 4” 4-1/2” 6”

770063 770075 770087 770099 770102 770126 770138 770152 770176 770188

(250-1124) (250-1584) (250-1344) (250-1784) (250-2004) (250-2384) (250-2124) (250-3004) (250-3124) (250-4004)

1-1/2” 1-5/8” 1-3/4” 1-7/8” 2” 2-3/8” 2-1/2” 3” 3-1/2” 4”

MPI Products Series 252 Corrugated Marine Exhaust Hose Sierra Exhaust Flapper Valves • Specially compounded rubber flapper valves designed to prevent water from entering the exhaust system in following seas or when backing down. • Made with weather resistant EPDM with UV stabilizer. • Includes stainless steel hose clamps.

770239 (252-2004) 770241 (252-3004)

2” 3”

3” 4” 5” or 6”

FUEL & PLUMBING

184456 (18-4456) 184457 (18-4457) 184458 (18-4458)

• Sold in 12-1/2’ lengths.

127

Fuel Hose

Marpac Premier Blue Fuel Hose • Meets EPA low permeation mandates and the stringent requirements of SAE J1527 B1-15 and ISO 8469. • Ethanol E10 and E85 compatible. • Flexible, kink-free performance. • 3/8”

7-6799 Length 10’ 7-6801 Length 50’

NEW

MPI Products Series 350 “Flex-Acol” Alcohol Resistant Type A and A2 Fuel Hose • Excellent resistance to fire, heat, ozone and permeation by alcohol blended gasoline and diesel fuels. • Compounded to meet or exceed SAE J1527 Type A and NMMA standards for fuel feed and vent hoses. • Multiple plies of reinforcement provide superior flexibility and good bend radius. • Type A Fuel Hose.

771217 771229 771231 771243 771116 771142 771104

Marpac Grey Fuel Hose • • • •

Meets EPA low permeation mandates. Ethanol resistant, double walled hose. E10 and E85 compatible. Kink free performance.

7-6798 3/8” ID 7-6800 3/8” ID 7-6900 5/16” ID

Length 10’ Length 50’ Length 100’

FUEL & PLUMBING

128

1/4” ID 5/16” ID 5/16” ID 3/8” ID 3/8” ID 5/8” ID

Length 50’ Length 50’ Length 50’ Length 50’ Length 10’ Length 10’ Length 10’

771118 (350-1120) 1-1/2” ID

Length 50’

MPI Products Series 360 C.A.R.B. Compliant Fule Line

NEW

• Excellent resistance to heat, ozone and permeation by alcohol blended gasoline and diesel fuels. • Compounded to meet or exceed SAE J1527 Type B and NMMA standards for fuel feed and vent hoses. • Multiple plies of reinforcement provide superior flexibility and good bend radius.

(315-0146) (315-0566) (315-0560) (315-0386) (315-0380) (315-0586)

5/16” ID 3/8” ID 1/2” ID 5/8” ID 1-1/2” ID 2” ID 1-1/2” ID Corr.

• Type A2 Fuel Hose.

MPI Products Series 315 “Flex-Acol” Alcohol Resistant Type B Fuel Hose

771306 771318 771344 771320 771356 771332

(350-0566) (350-0386) (350-0126) (350-0586) (350-1123) (350-2003) (352-1123)

Length 50’ Length 50’ Length 250’ Length 50’ Length 250’ Length 50’

• MPI barrier fuel line hose is certified SAE J1737, SAE J1527 Type A1-15, ISO 7840 and CE. • It is recommended for applications where low permeation C.A.R.B. compliance is required. • Used for marine gasoline engines and fuel tanks. • Inner tube provides extraordinary resistance to gasoline, ethanol, diesel and alcohol-enhanced fuels. • Excellent flexibility and bend radius. • Note: Permeation levels tested below 5 grams.

771246 771250 771252 771255

(360-0146) (360-0566) (360-0386) (360-0126)

1/4” ID 5/16” ID 3/8” ID 1/2” ID

Length 50’ Length 50’ Length 50’ Length 50’

Washdown Hose and Accessories

Marpac Coiled Washdown Hoses with Nozzle • • • •

Stainless steel spring. Solid brass fittings. No-kink design. Quick connect fitting with shut off. • 35% more flow at 40 psi.

Marine Space Saver Flat Hose • • • • •

Space saving flat hose is easy to store. FDA approved liner material for drinking water safety. Quality reinforced vinyl construction. Full-Flo brass couplings for unrestricted water flow. 5/8" ID.

437704 (11-12050R) Length 50’

7-0422 1/2” x 15’ Hose with Nozzle 7-0423 1/2” x 25’ Hose with Nozzle 7-0425 Hose Nozzle with Quick Fitting

MPI Products Washdown Hoses • Flexible reinforced PVC that is drinking-water safe. • Vinyl-protected, non-corrosive couplings will not mar decks and other surfaces. • White with blue stripe. • 5/8” ID.

771630 (170-0585) Length 25’ 771700 (170-0586) Length 50’

Reinforced Vinyl Garden Hose • • • •

4-ply construction. Full-Flo brass couplings for unrestricted water flow. Kink resistant. 5/8" ID.

646109 (15-58050) Length 50’

Gilmour Nylon Hose Repair Accessories Gilmour Insulated Pistol Grip Nozzle with Threaded Front 439186 (571TFR)

Gilmour Full Size Polymer Nozzle with Threaded Front

• Nylon construction for maximum strength and durability. • Fits 5/8” or 3/4” hose.

439124 439148 439162 439174

(01F) (01M) (01HM) (01RW)

Female Coupling Male Coupling Hose Mender Neoprene Hose Washers, 10 Per Bag

439174 439162 439124

439148 FUEL & PLUMBING

493182 (474)

Rule Reducing Hose Adapter Groco Salt Water Pistol-Grip Nozzle 371118 (PGN-50)

• Heavy duty molded, non-corrosive, high impact plastic.

582824 (69)

Rule Garden Hose Adapter • Heavy duty molded, non-corrosive, high impact plastic.

582812 (68)

129

Hose Clamps

AWAB Stainless Steel Mini Hose Clamps • Sold 20 per box.

275811 275823 275835 275859 275861 275873 275885 275897

(302009) (302010) (302011) (302013) (302014) (302015) (302016) (302017)

9/32” - 3/8” 5/16” - 13/32” 23/64” - 29/64” 7/16” - 17/32” 15/32” - 9/16” 33/64” - 39/64” 35/64” - 41/64” 19/32” - 11/16”

AWAB Flexible Clamp Driver 275900 (125010)

Hose Clamps

FUEL & PLUMBING

276015 276027 276039 276041 276053 276067 276079 276089 276091 276104 276116 276128 276130 276134 276142 276146 276154 276166 276178 276180 276192 276205 276217

130

(62602MS) (62606MS) (6306MS) (6308MS) (6310MS) (6312MS) (6316MS) (6320MS) (6324MS) (6328MS) (6332MS) (6336MS) (6340MS) (6344MS) (6348MS) (6352MS) (6356MS) (6364MS) (6372MS) (6380MS) (6388MS) (6396MS) (63104MS)

Fits Hose ID 1/8” - 5/16” Fits Hose ID 1/4” - 7/16” Fits Hose ID 5/16” - 3/8” Fits Hose ID 5/16” - 1/2” Fits Hose ID 3/8” - 5/8” Fits Hose ID 3/8” - 3/4” Fits Hose ID 3/4” - 7/8” Fits Hose ID 3/4” - 1-1/8” Fits Hose ID 7/8” - 1-3/8” Fits Hose ID 1-1/4” - 1-5/8” Fits Hose ID 1-1/2” - 1-7/8” Fits Hose ID 3/4” - 2” Fits Hose ID 1” - 2-1/4” Fits Hose ID 1-1/4” - 2-1/2” Fits Hose ID 1-1/2” - 2-3/4” Fits Hose ID 1-3/4” - 3” Fits Hose ID 2” - 3” Fits Hose ID 2-1/2” - 3-1/2” Fits Hose ID 3” - 5” Fits Hose ID 3-1/2” - 4-1/2” Fits Hose ID 3-1/2” - 5-1/2” Fits Hose ID 4-1/2” - 6” Fits Hose ID 3-1/2” - 6-1/2”

AWAB Stainless Steel Hose Clamps • Sold 10 per box.

275506 275518 275520 275532 275544 275556 275568 275570 275582 275594 275619 275621 275645 275671 275695 275710

(316017) (316020) (316024) (316028) (316032) (316038) (316044) (316050) (316057) (316064) (316076) (316083) (316095) (316114) (316140) (316165)

7/16” - 11/16” 1/2” - 13/16” 5/8” - 15/16” 3/4” - 1-1/8” 7/8” - 1-1/4” 1-1/16” - 1-1/2” 1-1/4” - 1-3/4” 1-1/2” - 2” 1-1/4” - 2-1/4” 1-1/2” - 2-1/2” 2” - 3” 2-1/4” - 3-1/4” 2-3/4” - 3-3/4” 3-1/2” - 4-1/2” 4” - 5-1/2” 5” - 6-1/2”

T-Bolt Exhaust Hose Clamps • Stainless steel. • Sold each.

769105 769107 769109 769110 769111 769115 769123 769135 769147

(720-2000) (720-2120) (720-3000) (720-3120) (720-4000) (720-4120) (720-5000) (720-6000) (720-8000)

Hose ID 2” Hose ID 2-1/2” Hose ID 3” Hose ID 3-1/2” Hose ID 4” Hose ID 4-1/2” Hose ID 5” Hose ID 6” Hose ID 8”

Ideal Hose Clamp Display • Yellow, plastic counter top display with 120 stainless steel hose clamps. The display includes: (20) 62602, (10) 62606, (10) 6310, (20) 6312, (30) 6320, (20) 6328 and (10) 6336 clamps.

276003 (6304MS)

Pump Accessories

Groco Flo-Master SPO-60 Series Vane Pump

Groco AS-100 Bilge Pump Switch

• Oil pumping, diesel fuel pumping, bilge pumping and deckwash. • Continuous duty face-type shaft seal. • Ignition protected permanent magnet ball bearing motor. • 7 GPM. • Self-priming to 24". • Ports are threaded externally for garden hose and internally for 1/2" NPT. • 12 volt.

• Turns bilge pump off and on by sensing changes in pressure (caused by rising or falling bilge water level) in its air tube. • Approximate levels are “ON” at 2-3/4" of bilge level and “OFF” at 1". • Use with a pump that draws up to 10 amps continuous or up to 20 amps intermittent.

375177 (SPO-60R-12V) Reversing

Sure Bail Automatic Float Switch

373102 (AS-100)

• For bilge pump and high water alarm systems. • High impact polypropylene case protects float and prevents failures due to debris lodging on top or under the float. • Width 2-7/8". Length 5-1/2". • 5 year warranty.

470017 (SB-1)

Jabsco Impellers (14750-0001) Neoprene for 417407 Pump (14750-0003) Nitrile for 417407 Pump (6303-0001) Neoprene for Water Puppy Pump (6303-0003) Nitrile for Water Puppy Pump (1210-0001) Neoprene for 417902 Pump (1210-0003) Nitrile for 417902 Pump (5929-0001) Neoprene for 417459 Pump (5929-0003) Nitrile for 417459 Pump (17937-0001) Neoprene (920-0001) Neoprene for 417940 Pump (920-0003) Nitrile for 417940 Pump (17935-0001) Neoprene (17936-0001) Neoprene for 417976 Pump (18673-0001) Neoprene for 417898 Pump (11979-0001) Neoprene for 417078 Pump (9200-0023) Impeller for 415326 Oil Changer (18958-0001) Neoprene (17954-0001) Neoprene for 418143 Pump (18948-0001) Neoprene

Johnson Service Kits 462868 (09-45589) 462907 (09-45825)

For Engine Cooling Pump For 461401 Pump

Sure Bail Electronic Float Switch • • • •

Environmentally safe, contains no mercury. R0HS Compliant (Regulations on Hazardous Substances). High-impact polypropylene case. Manual operation-simply rotate the external shaft.

470029 (902-2000)

FUEL & PLUMBING

418233 418246 418284 418295 418309 418311 418335 418347 418359 418361 418373 418424 418457 418500 418599 418601 418613 418637 418664

Johnson Impellers 462034 462248 462250 462262 462274 462286 462301 462313

(09-1028B) (09-1027B) (09-812B) (09-808B) (09-1026B) (09-824B-9) (09-1028B) (09-820B)

For 461739 Pump For Engine Cooling Pump For 461401 Pump For 461944 Pump For Engine Cooling Pump For 461866 Pump For 461513 Pump For Engine Cooling Pump

131

Marpac Light Bulbs

360° L.E.D. Replacement Bulb Marpac Wedge Base Bulbs 7-3925 (70) 14 volts 7-3951 (194) 14 volts

2.1 watts 3.8 watts

Marpac Double Contact Bayonet Base Bulbs 7-3920 7-3936 7-3946 7-3966 7-3970 7-3980 7-3991

(68) 13.5 volts (90) 13 volts (94) 12.8 volts (1004) 12.8 volts (1034) 12.8 volts (1142) 12.8 volts (1157) 12 volts

7-7200

Marpac Festoon Bulbs 8 watts 7.5 watts 13.3 watts 12 watts 23 watts 18.4 watts

Marpac Mini Bayonet Base Bulbs 7-3905 (53) 14.4 volts 7-3910 (57) 14 volts 7-4000 (1895) 14 volts

• Long Life LED replaces the most popular stern light bulbs on the market. • Direct replacement for #90 incandescent bulb. • Low power consumption, yet ultra bright. • Double contact.

1.7 watts 3.4 watts 3.8 watts

7-3955 7-3960 7-4010 7-4020

(211) (212) (70) (71)

12.8 volts 13.5 volts 12 volts 12 volts

12 watts 10 watts 15 watts 10 watts

Marpac Single Contact Bayonet Base Bulbs 7-3915 7-3930 7-3940 7-3975 7-3986

(67) 13.5 volts (71) 2.2 volts (93) 12.8 volts (1141) 12.8 volts (1156) 12.8 volts

8 watts 0.4 watts 13.3 watts 18.4 watts 26.9 watts

Wiring Color Code - Direct Current Systems - Under 50 Volts COLOR Dark Green Black Red Yellow w/a Red Stripe Yellow

Dark Gray Brown

ELECTRICAL

Orange

Purple

132

Dark Blue Tan Pink

ITEM

USE

Bonding System Ground Main Power Feeds Starting Circuit Generator or Alternator Field

Bonding Wires (if insulated) Return Wires (if insulated) Positive Mains, Particularly Unfused Starting Switch to Solenoid Generator to Alternator Field to Regulate Field Terminal Fuse or Switch to Bilge Blowers Fuse or Switch to Lights Tachometer to Gauge Generator Armature to Regulator Generator Terminal/Alternator Auxiliary Terminal to Light to Regulator Fuse or Switch to Pumps Ammeter to Alternator or Generator Output & Accessory Fuses or Generator Switches Distribution Panel to Accessory Switch Ignition Switch to Coil and Electrical Instruments

Bilge Blowers Navigation Lights Tachometer Generator Armature Alternator Charge Light Pumps Accessory Feed

Ignition Instrument Feed Oil Pressure Water Temperature Fuel Gauge

Oil Pressure Sender to Gauge Water Temperature Sender to Gauge Fuel Gauge Sender to Gauge

Marpac Primary Wire and Boat Cable

Marpac Plastic Primary Wire - Single Conductor

Marpac Tinned Copper Marine Primary Wire

7-4358 7-4356 7-4354 7-4350 7-4348 7-4346 7-4344 7-4340 7-4338 7-4336 7-4334 7-4328 7-4326 7-4324 7-4322 7-4320 7-4318 7-4316 7-4314 7-4312 7-4310 7-4306 7-4304 7-4302 7-4300

7-4115 7-4120 7-4125 7-4130 7-4135 7-4145 7-4150 7-4155 7-4160 7-4165 7-4170 7-4175 7-4180 7-4185 7-4190

8 Gauge 8 Gauge 8 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 12 Gauge 12 Gauge 12 Gauge 12 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 16 Gauge 16 Gauge 16 Gauge 16 Gauge

Green - Note: Not Tinned Red - Note: Not Tinned Black - Note: Not Tinned Green White Red Black Green White Red Black Pink Dark Blue Light Blue Orange Brown Yellow Green White Red Black Green White Red Black

16 AWG 16 AWG 16 AWG 16 AWG 14 AWG 14 AWG 14 AWG 12 AWG 12 AWG 12 AWG 12 AWG 10 AWG 10 AWG 10 AWG 10 AWG

Black Green Red White Black Red White Black Green Red White Black Green Red White

Length 30’ Length 30’ Length 30’ Length 30’ Length 20’ Length 20’ Length 20’ Length 15’ Length 15’ Length 15’ Length 15’ Length 10’ Length 10’ Length 10’ Length 10’

Marpac Boat Cable - Duplex 7-4370 7-4368 7-4366 7-4364

7-4390 7-4388 7-4386 7-4382 7-4384 7-4380 7-4394 7-4392 7-4400 7-4398 7-4396

2 Conductor 2 Conductor 2 Conductor 2 Conductor 2 Conductor 2 Conductor 3 Conductor 3 Conductor 4 Conductor 4 Conductor 4 Conductor

10 Gauge 12 Gauge 14 Gauge 16 Gauge 16 Gauge 18 Gauge 14 Gauge 16 Gauge 14 Gauge 16 Gauge 18 Gauge

100’ Spool 100’ Spool 100’ Spool 100’ Spool 500’ Spool 100’ Spool 100’ Spool 100’ Spool 100’ Spool 100’ Spool 100’ Spool

100’ Spool 100’ Spool 100’ Spool 100’ Spool

Marpac Boat Cable - Triplex 7-4376 10 Gauge 7-4374 12 Gauge 7-4372 14 Gauge

100’ Spool 100’ Spool 100’ Spool

ELECTRICAL

Marpac Bonded Parallel Plastic Primary Wire

10 Gauge 12 Gauge 14 Gauge 16 Gauge

133

Battery Cables

Ancor Tinned Battery Cable 211538 211540 211413 211425 211437 211449 211451 211463 211475 211487 211499 211502 211514 211526

6 Gauge 6 Gauge 4 Gauge 4 Gauge 4 Gauge 4 Gauge 2 Gauge 2 Gauge 1 Gauge 1 Gauge 1/0 Gauge 1/0 Gauge 2/0 Gauge 2/0 Gauge

Red Black Red Black Red Black Red Black Red Black Red Black Red Black

50’ Spool 50’ Spool 50’ Spool 50’ Spool 100’ Spool 100’ Spool 50’ Spool 50’ Spool 50’ Spool 50’ Spool 50’ Spool 50’ Spool 50’ Spool 50’ Spool

Marpac Starter Cable 7-4436 7-4432 7-4434 7-4430 7-4428 7-4426 7-4424 7-4420 7-4422 7-4418 7-4416 7-4412 7-4414 7-4410 7-4408 7-4406

2/0 Gauge 2/0 Gauge 2/0 Gauge 2/0 Gauge 1 Gauge 1 Gauge 2 Gauge 2 Gauge 2 Gauge 2 Gauge 4 Gauge 4 Gauge 4 Gauge 4 Gauge 6 Gauge 6 Gauge

Black Black Red Red Black Red Black Black Red Red Black Black Red Red Black Red

100’ Spool 25’ Spool 100’ Spool 25’ Spool 25’ Spool 25’ Spool 100’ Spool 25’ Spool 100’ Spool 25’ Spool 100’ Spool 25’ Spool 100’ Spool 25’ Spool 100’ Spool 100’ Spool

ELECTRICAL

• Easy to use, fast response • Up to the minute on hand inventory availability • Quick and easy check out

134

• Works 24-7

Marpac Premade Tinned Copper Battery Cable 7-4055 7-4060 7-4065 7-4070 7-4075 7-4080 7-4085 7-4090 7-4095 7-4100 7-4105 7-4110

4 AWG x 24 4 AWG x 24 4 AWG x 36 4 AWG x 36 4 AWG x 48 4 AWG x 48 2 AWG x 48 2 AWG x 48 2 AWG x 60 2 AWG x 60 2 AWG x 72 2 AWG x 72

Black Red Black Red Black Red Black Red Black Red Black Red

Battery Lugs and Accessories

Heavy Duty Flared Lugs Sold Each

Marpac Tinned Copper Lugs

• Solid copper. • Not tinned.

7-3450 7-3455 7-3460 7-3465 7-3470 7-3475 7-3480 7-3490 7-3500 7-3510 7-3520 7-3525 7-3530 7-3535 7-3540 7-3545 7-3550 7-3555 7-3560 7-3565 7-3570 7-3575

277684 277687 277689 277691 277693 277695 277699 277702 277714 277726 277738 277773 277777 277779 277790 277780 277815 479914 277775

(5468) (5382) (5462) (5459) (5460) (5463) (5326) (5327) (5329) (5331) (5333) (5335) (5339) (5330) (5332) (5334) (5336) (5338) (5340)

Stud Size 5/16” Stud Size 5/16” Stud Size 5/16” Stud Size 5/16” Stud Size 5/16” Stud Size 5/16” Stud Size 3/8” Stud Size 3/8” Stud Size 3/8” Stud Size 3/8” Stud Size 3/8” Stud Size 3/8” Stud Size 3/8” Stud Size 1/2” Stud Size 1/2” Stud Size 1/2” Stud Size 1/2” Stud Size 1/2” Stud Size 1/2”

• Sold 2 per display package.

6 Gauge 4 Gauge 2 Gauge 1 Gauge 1/0 Gauge 2/0 Gauge 6 Gauge 4 Gauge 2 Gauge 1 Gauge 1/0 Gauge 2/0 Gauge 4/0 Gauge 2 Gauge 1 Gauge 1/0 Gauge 2/0 Gauge 3/0 Gauge 4/0 Gauge

Battery Terminals • Lead terminals with wing nut. • For marine use. • Sold per pair skin packed: 1 positive and 1 negative.

277875 (00354)

Marpac Battery Terminal Guards

8 AWG 8 AWG 8 AWG 6 AWG 6 AWG 6 AWG 6 AWG 4 AWG 4 AWG 2 AWG 2 AWG 1 AWG 1 AWG 1/0 AWG 1/0 AWG 1/0 AWG 2/0 AWG 2/0 AWG 2/0 AWG 2/0 AWG 4/0 AWG 4/0 AWG

#1/4 #5/16 #3/8 #1/8 #1/4 #5/16 #3/8 #5/16 #3/8 #5/8 #3/8 #5/16 #3/8 #5/16 #3/8 #1/8 #1/4 #5/16 #3/8 #1/8 #3/8 #1/2

Blue Sea Systems Mini Clamp Multimeter • Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting live terminals. • Auto range simplifies operation: 0.01-400 Amps, 0.001-600 Volts.

379277 (8110)

• Sold per pair per package.

Mini Pocket Butane Torch • A refillable butane torch weighs only 2.5 oz. 4-3/8" H x 1-7/8" diameter with a wind resistant burner that burns at a hot temp of 2370° F (1299° C).

211552

Marpac Black Heat Shrink Tubing • • • •

Diameter 1/2”. Length 3”. Double wall 8 AWG to 4 AWG. 2 pieces red, 1 piece black per card.

ELECTRICAL

7-4195 For 2 AWG Battery Cable 7-4200 For 4 AWG Battery Cable

7-4040 Sold 5 Bags Per Card

Electrical Heat Shrink Tubing 480082 (10810-4) 1/2” x 4’ 480094 (10811-4) 3/4” x 4’

135

Terminals and Connectors

Electrical Ring Terminals

Electrical Spade Terminals • Sold 100 per bag.

479623 (10223) 12-10 Gauge 479421 (10200) 16-14 Gauge 479419 (10199) 16-14 Gauge

Yellow Blue Blue

#10 #10 #8

Electrical Butt Connectors 479899 479801 479700 479508 479320

(10309) (10289) (10228) (10207) (10183)

6 Gauge Blue 8 Gauge Red 12-10 Gauge Yellow 16-14 Gauge Blue 22-18 Gauge Red

25 Per Bag 25 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag

Electrical .250 Quick Disconnects • Sold 100 per bag.

479647 479659 479445 479457

(10243) (10244) (10239) (10240)

12-10 Gauge 12-10 Gauge 16-14 Gauge 16-14 Gauge

Yellow Yellow Blue Blue

Male Female Male Female

479938 479875 479863 479851 479786 479774 479762 479750 479609 479596 479584 479572 479560 479407 479394 479382 479370 479368 479243 479231 479229 479217

(10341) (10302) (10301) (10300) (10293) (10292) (10291) (10290) (10216) (10215) (10214) (10213) (10212) (10191) (10190) (10189) (10188) (10187) (10169) (10168) (10167) (10166)

4 Gauge 6 Gauge 6 Gauge 6 Gauge 8 Gauge 8 Gauge 8 Gauge 8 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 22-18 Gauge 22-18 Gauge 22-18 Gauge 22-18 Gauge

Yellow Blue Blue Blue Red Red Red Red Yellow Yellow Yellow Yellow Yellow Blue Blue Blue Blue Blue Red Red Red Red

5/16” 3/8” 5/16” 1/4” 3/8” 5/16” 1/4” #10 1/2” 3/8” 5/16” 1/4” #10 3/8” 5/16” 1/4” #10 #8 5/16” 1/4” #10 #8

25 Per Bag 25 Per Bag 25 Per Bag 25 Per Bag 25 Per Bag 25 Per Bag 25 Per Bag 25 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag 100 Per Bag

479659 479647

Electrical Heat Shrink Connectors • Sold 25 per bag.

Electrical .157 Bullet Connectors • Sold 100 per bag.

479469 (10241) 16-14 Gauge Blue 479471 (10254) 16-14 Gauge - Receptacle Blue

479471 ELECTRICAL

479469

Marpac Electrical Tab Adapter • Converts one .250 x .032 male tab to two male tabs. • Sold 100 per bag.

136

479510 (10270)

479990 480018 480020 480032 480044 480056 480068 480070

(11702-25) (11708-25) (11712-25) (11718-25) (11720-25) (11732-25) (11739-25) (11742-25)

22-18 Gauge 22-18 Gauge 16-14 Gauge 16-14 Gauge 16-14 Gauge 12-10 Gauge 12-10 Gauge 12-10 Gauge

#10 Ring Butt Connector #10 Ring #10 Spade Butt Connector #10 Ring #10 Spade Butt Connector

Terminals and Connectors

Marpac Vinyl Butt Connectors

Marpac Vinyl Spade Forks

7-3110 22-18 AWG 7-3115 16-14 AWG 7-3120 12-10 AWG

7-3190 22-18 AWG - #10 7-3195 16-14 AWG - #10 7-3200 12-10 AWG - #10

Red Qty. Per Pkg. 6 Blue Qty. Per Pkg. 6 Yellow Qty. Per Pkg. 6

Marpac Vinyl Ring Tongues 7-3125 7-3130 7-3135 7-3140 7-3145 7-3150 7-3155 7-3165 7-3170 7-3175 7-3180 7-3185

22-18 AWG - #6 22-18 AWG - #8 22-18 AWG - #10 16-14 AWG - #6 16-14 AWG - #8 16-14 AWG - #10 16-14 AWG - #1/4 16-14 AWG - #3/8 12-10 AWG - #10 12-10 AWG - #1/4 12-10 AWG - #5/16 12-10 AWG - #3/8

Red Red Red Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow

Qty. Per Pkg. 7 Qty. Per Pkg. 7 Qty. Per Pkg. 7 Qty. Per Pkg. 7 Qty. Per Pkg. 7 Qty. Per Pkg. 7 Qty. Per Pkg. 6 Qty. Per Pkg. 5 Qty. Per Pkg. 6 Qty. Per Pkg. 5 Qty. Per Pkg. 5 Qty. Per Pkg. 5

Red Qty. Per Pkg. 7 Blue Qty. Per Pkg. 7 Yellow Qty. Per Pkg. 6

Marpac Vinyl Quick Disconnects - Fully Insulated 7-3205 7-3210 7-3215 7-3220 7-3225 7-3230

22-18 AWG - Male 22-18 AWG - Female 16-14 AWG - Male 16-14 AWG - Female 12-10 AWG - Male 12-10 AWG - Female

Red Red Blue Blue Yellow Yellow

Qty. Per Pkg. 4 Qty. Per Pkg. 4 Qty. Per Pkg. 4 Qty. Per Pkg. 4 Qty. Per Pkg. 4 Qty. Per Pkg. 4

Marpac Vinyl Closed End Connectors 7-3255 22-14 AWG 7-3260 18-10 AWG

Qty. Per Pkg. 9 Qty. Per Pkg. 8

Marpac 96 Vinyl Electrical Termianl Kit

7-4205

Marpac Vinyl Bullet Connectors 7-3245 16-14 AWG 7-3250 16-14 AWG

Plug Receptacle

Qty. Per Pkg. 7 Qty. Per Pkg. 4

Marpac Vinyl Scotch Locks 7-3235 14-18 AWG 7-3240 12-10 AWG

Blue Qty. Per Pkg. 3 Yellow Qty. Per Pkg. 3

ELECTRICAL

â&#x20AC;˘ Kit contains 96 pieces in a closable plastic case: (15) 7-3110 - 22-18 AWG Butt Connectors (30) 7-3115 - 16-14 AWG Butt Connectors (6) 7-3120 - 12-10 AWG Butt Connectors (6) 7-3135 - 22-18 AWG #10 Ring Tongue Terminals (8) 7-3150 - 16-14 AWG #10 Ring Tongue Terminals (5) 16-14 AWG 5/16 Ring Tongue Terminals (5) 7-3170 - 12-10 AWG #10 Ring Tongue Terminals (6) 7-3185 - 12-10 AWG 3/8 Ring Tongue Terminals (2) 8 AWG 3/8 Ring Tongue Terminals (3) 7-3215 - 16-14 AWG Male Quick Disconnects (3) 7-3220 - 16-14 AWG Female Quick Disconnects (2) 7-3245 - 16-14 AWG Bullet Connector Plugs (2) 7-3250 - 16-14 AWG Bullet Connector Receptacles (3) 7-3235 - 14-16 Scotch Locks

137

Terminals and Connectors

Marpac Heat Shrink Butt Connectors

Marpac Heat Shrink Ring Tongues

• Sold 2 per package. Mini-Blister - 5 per box.

• Sold 2 per package, except for 7-3325 (Sold 4 per package) Mini-Blister - 5 per box.

7-3290 22-18 AWG 7-3300 16-14 AWG 7-3310 12-10 AWG

Red Blue Yellow

Marpac Heat Shrink Quick Disconnects - Insulated • Sold 2 per package. Mini-Blister - 5 per box.

7-3395 7-3400 7-3405 7-3410 7-3415 7-3420

22-18 AWG - Male 22-18 AWG - Female 16-14 AWG - Male 16-14 AWG - Female 12-10 AWG - Male 12-10 AWG - Female

Red Red Blue Blue Yellow Yellow

7-3320 7-3325 7-3335 7-3345 7-3350 7-3355 7-3365 7-3370 7-3375 7-3385 7-3390 7-3425

22-18 AWG - #10 22-18 AWG - #1/4 16-14 AWG - #8 16-14 AWG - #10 16-14 AWG - #1/4 16-14 AWG - #5/16 16-14 AWG - #3/8 12-10 AWG - #10 12-10 AWG - #1/4 12-10 AWG - #3/8 12-10 AWG - #1/2 12-10 AWG - #5/16

Red Red Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow

Cable Ties and Cable Clamps

Electrical Nylon Cable Ties

Ancor Stainless Steel Cushion Clamps • Sold 10 per display pack.

211639 211641 211653 211665 211677 211689 211691 211704 211716 211728

(403182) (403252) (403312) (403372) (403502) (403622) (403752) (403892) (403902) (404152)

3/16” ID 1/4” ID 5/16” ID 3/8” ID 1/2” ID 5/8” ID 3/4” ID 1” ID 1-1/4” ID 1-1/2” ID

Screw Width 3/8” Screw Width 3/8” Screw Width 3/8” Screw Width 3/8” Screw Width 1/2” Screw Width 1/2” Screw Width 1/2” Screw Width 1/2” Screw Width 1/2” Screw Width 1/2”

Marpac Universal Wire Stripper ELECTRICAL

• Self-adjusting between 10 AWG - 24 AWG. • Strips wire insulation in fast, precision motion without damaging strands. • Also crimps and cuts. • Strips middle of wire for taps. • Works on two conductor wire.

7-4210

138

480501 480525 480549 480563 480587 480664 480688 480690

(64880) Length 4” (64886) Length 5.6” (64908) Length 7.5” (64914) Length 11.1” (64918) Length 14.1” (64942) Length 6” (64948) Length 7.5” (64960) Length 14.5”

Standard Standard Standard Standard Standard Screw Mount Screw Mount Screw Mount

Ancor Nylon Cable Clamps • Sold 25 per display pack.

211576 211588 211590 211603 211615 211627

(402252) (402312) (402372) (402502) (402622) (402752)

1/4” ID 5/16” ID 3/8” ID 1/2” ID 5/8” ID 3/4” ID

Rigging Accessories

T-H Marine Black Flex Sleeving - Mesh Rigging Conduit

T-H Marine Rigging Flange with Fuel Hose Port and Hose Union

• Lightweight jacketing for bundling and protecting wires, cables and hoses. • Braided from high temperature yarns. • Easy to slip on. • Sold in spools.

• • • •

642352 (FLX-50) Diameter 1/2” Length 100’ 642365 (FLX-75) Diameter 3/4” Length 100’ 642389 (FLX-150) Diameter 1-1/2” Length 50’

MPI Products Split Conduit Tubing

Completes professional rigging installation. Complies with ABYC - NMMA Specs. Split design allows installation on pre-rigging boats. Fuel hose port fits type “A” hose and hose union fits Type “B” hose. • Installs with T-H Marine Rigging Hose.

640961 (RFFHP-1) Rigging Flange with Fuel Hose Port 640970 (RFHU-1) Rigging Flange Hose Union

T-H Marine Rigging Flanges

• Corrugated split polyethylene provides excellent conduit for multiple wire or cable routings. • Creates quality appearance in wiring systems. • Ideal product for hose abrasion protection. • Black.

Marpac Motorwell Boots

772043 (125B-1126) 1-1/2” x 50’

• Protects fuel lines, wires and cables.

• Formulated in accordance with UL94 V2 tests for flammability. • Meets tough ABYC standards.

7-0674 For 3-1/2” Hole 7-0675 For 4-1/2” Hole 7-0677 For 3” Hole

543320 (123-0126) 1/2” x 50’ 543321 (123-0386) 3/8” x 50’ 543319 (123-0346) 3/4” x 50’

641957 (RF-1CP-DP) 641806 (747-2000)

Chrome Plated Black

7-0674

Heli Tube Cable Wrap - Black

• High quality, crush resistant plastic offers excellent flexing properties and abrasion resistance. • Material is resistant to bilge acids, fuel solutions and ultra violet rays. • For all bracket mounted outboard motors.

772916 772928 772933 772942

(HT 1/4 UR) 1/4” (HT 3/8 UR) 3/8” (HT 1/2 UR) 1/2” (HT 3/4 UR) 3/4”

Length 100’ Length 100’ Length 100’ Length 100’

ELECTRICAL

MPI Products Rigging Hose - Black

• Bundles wires, cables, hoses and tubing firmly but allows flexibility. • Resists abrasion, dampens vibration, organizes and insulates. • Ultra violet resistant. • UL recognized component listed under category UZKX2.

641819 (127-2003) 2” x 10’ 641818 (127-2006) 2” x 50’

139

Electrical Tape

Star Brite Liquid Electrical Tape

3M Scotch Vinyl Electrical Tape - 35

• • • • •

• Use it for phase identification, marking of motor leads and piping systems and for outlining safety areas. • Also used as a rigging tape. • Sold 10 rolls per case.

Waterproofs and protects electrical connections. Forms a protective UV resistant dielectric coating. Prevents corrosion on wires and terminals. UL tested. 4 oz.

628202 (84104) Black 628214 (84105) Red

3M Scotch Super 33+ Vinyl Electrical Tape - Black • A premium grade vinyl electrical insulating tape, its aggressive adhesive and elastic backing ensure easy, water-resistant conformation to irregular surfaces in low temperatures, yet will not ooze or melt in high temperatures. • Abrasion-, corrosion- and UV-resistant. • 10 rolls per box.

857435 (06133) 3/4” x 52’

857447 (10810) 3/4” x 66’ 857450 (10828) 3/4” x 66’

Red White

3M Tartan General Use Vinyl Electrical Tape - Black • On a 1-1/2 inch core, this black, 7 mil vinyl tape is a good quality, economical general purpose insulating tape. • Its elastic backing ensures easy, moisture-tight conformation to irregular surfaces. • UL Listed and is flame-retardant.

512168 (49656) 3/4” x 60’

3M Highland Vinyl Electrical Tape - Black Marpac Vinyl Hole Grommets 7-3665 1/4” 7-3670 1/2”

Sold 6 Per Package Sold 4 Per Package

• This black, 7 mil tape is a flexible, stretchy, conformable, commercial grade vinyl, that is flame retardant. • Can be used for protective jacketing and harnessing. • 10 rolls per box.

857423 (16720) 3/4” x 66’

ELECTRICAL

140

Electrical Accessories

Cole Hersee Temperature Switch

Cole Hersee Electrical Connector

• Corrosion resistant construction. • Red light - Hot - On at 194° F to 206° F.

• • • • •

300828 (84218)

Universal trailer plug and socket. Thermo plastic molded insulator with rubber cap. 2-Pole in line mated connector with brass screws. Machined brass contacts. Rubber boot protects terminals and connections from moisture and dirt.

300549 (M-121-BP)

Cole Hersee Oil Pressure Switch • Weather resistant, plated steel case. • Self-grounding, S.P.S.T. Normally ON (contacts closed). • Operates at 4.5 to 7.5 PSI.

300830 (8610)

Cole Hersee Dual Alarm Warning Light • Combination warning light and buzzer operate simultaneously, providing two way warning of unsafe or hazardous conditions. • Heavy gauge steel case, plated to resist corrosion.

Cole Hersee Continuous Duty Solenoid • • • • • • •

Continuous duty. Insulated. Normally open. S.P.S.T. Copper terminals, 10-32 thread and 5/16” - 24 thread. Continuous rating: 65 amp. 12 volt.

330780 (24059-08)

630992 (4112-RC)

Shakespeare Centerpin Connectors Blue Sea CableClams • Waterproof co-axial installation connectors. • Acetal body. • UV-Stabilized Buna-N Rubber. • Stainless steel screws.

without

removing

• Gold-Plated. • The perfect solution to the troublesome task of installing a PL-259 connector or splicing RG-58 A/U or RG-8/X coax cables. • Solderless, fret-less and botchless.

606232 (PL-258-CP) 606244 (PL-259-CP)

379998 (1001) Connector Opening: .625” 380004 (1002) Connector Opening: .825” 380016 (1003) Connector Opening: 1.385”

T-H Marine Ceacap Bulkhead Pass-Thru Fittings Watertight seal for cables, tubing or wires. Self-attaching - no hardware needed. Turn down washer included. Fits 3/4” holes - slot is 1/4” diameter.

ELECTRICAL

• • • •

642100 (TH-CC-1) Black

141

See Page 154 for Replacement Switches/Fuses

Electrical Panels

Marpac LED Advantage Switch Panel • LED backlit switch names glow when activated, know what’s on at a glance. • LED’s amp draw is too small to record. • Watertight design includes breaker and toggle switch boots as well as panel mounting gasket. • 15 amp push button resettable breakers are easy to replace with other Marpac breakers. • Replaceable on-off toggle switches rated at 20 amps. • Panel made from corrosion proof ABS plastic with reinforced corners. • Designed for 12 volt systems.

Marpac Switch Panels • Black bakelite panel. • Includes: Chrome plated toggle switches and screw cap fuse holders. • Rated 15 amps.

7-0516 3 Gang 4-1/4” x 3-1/2” 7-0518 6 Gang 4-1/2” x 6-1/2” 7-0519 Protective Boot

7-0497 6 Gang

7-0516 7-0518

NEW

Marpac Power Panels • Marine grade aluminum panel. • Modern style illuminated rocker switches glow white when on. • Weather resistant breaker boots included.

Marpac Switch Panel

7-0513 6 Gang 7-0514 3 Gang

5-1/4” x 7-1/2” 5-1/4” x 3-3/4”

• Black bakelite panel with chrome plated toggle switches and screw cap fuse holders. • Rated 15 amps. • Dimensions: 4-1/2” x 6-1/4”.

7-0517 6 Gang with Boot 7-0519 Protective Boot 7-0514 7-0513

Marpac Label Kit for Switch Panels ELECTRICAL

• Fits all Marpac switch panels. Includes: Accessory, Aerator, Anchor Light, Bait Pump, Baitwell, Bilge Pump, Bilge Pump Aft, Bilge Pump Fwd, Cabin Lights, Deck Lights, Fish Finder, Flood Lights, GPS, Nav Lights, Running Lights, Spreader Lights, VHF, Wash Down, Water Pressure, Wipers.

7-0509

142

Electrical Panels

Blue Sea Systems Vertical Series Waterproof Fuse Panels

Blue Sea Systems Waterproof Circuit Breaker Panels

• • • • • •

• • • •

ON-OFF water resistant Contura Switches. Switch rating 20 amp maximum. Fuse holder rating 20 amp maximum. Panel cumulative rating 45 amps. 12 volt. Comes with set of 30 common DC labels.

379633 (8053) 6 Gang 379645 (8054) 3 Gang

7-1/2” H x 5-1/4” 3-3/4” H x 5-1/4”

379633

Blue Sea Systems Horizontal Series Waterproof Fuse Panels ON-OFF water resistant Contura Switches. Switch rating 20 amp maximum. Fuse holder rating 20 amp maximum. Panel cumulative rating 45 amps. 12 volt. Comes with set of 30 common DC labels.

379657 (8261) 8 Gang 379669 (8262) 4 Gang

379667 (8371) 8 Gang 379668 (8372) 4 Gang

4-1/4” x 9-3/8” 4-1/4” x 5-1/4”

Blue Sea Systems WeatherDeck Waterproof Fuse Panels

379645

• • • • • •

Waterproof rated IP66. ON-OFF water resistant Contura Switches. 12 volt. Includes set of 60 common DC labels.

• • • •

Designed for flybridge and open cockpit applications. Waterproof rated IP67. Switch rating 15 amp maximum. 12 volts.

379608 379609 379610 379611

(4304) 4 Position - Gray (4306) 6 Position - Gray (4308) 8 Position - Gray (4314) 4 Position - White

4.30” H x 3.88” W 6” H x 3.88” W 7.70” H x 3.88” W 4.30” H x 3.88” W

3-3/4” H x 9-3/8” 3-3/4” H x 5-1/4”

Blue Sea Systems WeatherDeck Waterproof Circuit Breaker Panel

379671 (4215) 30 Label Set 379672 (4216) 60 Label Set 379673 (4217) 120 Label Set

379612 (4386) 6 Position White ELECTRICAL

Blue Sea Systems Weatherproof Panel Label Sets

NEW 143

Circuit Breakers

Marpac Hi-Amp Circuit Breakers

NEW

• Unique reset mechanism provides a visual indication of tripped condition. • Features a push-to-trip option. • Typically used in auxiliary and accessory circuits in marine systems, including battery chargers and DC audio systems. • Sealed for engine compartment and bilge area applications. • 1/4-28 threaded studs. • Compliances: SAE J1625; ABYC E-11; CE; SAE J1171 (Ignition Protected).

7-1720 7-1725 7-1730 7-1731 7-1732 7-1733 7-1734 7-1735

50 Amp 80 Amp 25 Amp 30 Amp 40 Amp 50 Amp 70 Amp 100 Amp

Panel Mount Panel Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount

• Manual reset circuit breaker with On-Off switch capability. • Typically used in DC power systems in marine applications (as a main or branch circuit breaker). • Easily mounted to any flat surface. • External ignition protected and weatherproof. • 5/16-18 threaded studs. • Compliances: ABYC E-11; CE; SAE J1171 (Ignition Protected).

7-1740 7-1741 7-1742 7-1743 7-1744 7-1745

25 Amp 30 Amp 40 Amp 50 Amp 70 Amp 100 Amp

Blue Sea Systems Thermal Circuit Breakers - Surface Mount

7-1725

• Ignition protected. • Combines switching & circuit protection into a single device. • Trip Free - cannot be held "ON" during fault current condition. • Maximum voltage rating: 48 volts DC.

7-1734

Blue Sea Systems Thermal Circuit Breakers - Surface Mount • Ignition protected. • Combines switching and circuit breaker function into one unit. • Trip free - cannot be held closed after trip. • Interrupt rating: 3,000 amperes DC. • Maximum voltage rating: 42 volts DC.

379526 (7100) 50 Ampere 379532 (7112) 70 Ampere 379528 (7102) 100 Ampere

NEW

Marpac Marine Rated Circuit Breakers with Switch Function

379533 379534 379535 379536 379537

(7135) 25 Ampere (7136) 30 Ampere (7138) 40 Ampere (7139) 50 Ampere (7141) 70 Ampere

Blue Sea Systems Thermal Circuit Breakers - Panel Mount • • • • •

Ignition protected. Combines switching & circuit breaker function into one unit. Trip free - cannot be held closed after trip. Interrupt rating: 3,000 amperes DC. Maximum voltage rating: 42 volts DC.

ELECTRICAL

379520 (7000) 50 Ampere 379524 (7014) 80 Ampere

144

Circuit Breakers and Fuses

Blue Sea Systems Push Button Circuit Breakers

NEW

• Branch circuit breakers (can also be used for 24-hour circuit protection). • Push-to-reset operation. • “Trip Free” design cannot be held “ON” during fault current condition. • Ignition protected - Safe for installation aboard gasoline powered boats.

379458 379460 379462 379464

(7052) 5 Amp (7054) 10 Amp (7057) 20 Amp (7059) 30 Amp

Cole Hersee Circuit Breakers with Mounting Bracket • High quality plated steel with heavy gauge steel mounting bracket. • Rated at 12V DC. • Two #10-32 stud terminals with hex nuts and lock washers. • Dimensions: 2" L x .78" W x 1.38" H.

330785 330794 330807 330819 330821

(30055-15) 15 amp (30055-20) 20 amp (30055-30) 30 amp (30055-40) 40 amp (30055-50) 50 amp

Marpac Mini Plug-In Fuses • Sold 3 per pack.

7-3800 7-3805 7-3810 7-3815 7-3820 7-3825 7-3830 7-3835 7-3840 7-3845

3 amp 4 amp 5 amp 7.5 amp 10 amp 15 amp 20 amp 25 amp 30 amp 40 amp

Blue Sea Systems Maxi Fuse • • • • •

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Maximum voltage rating: 32 Volts DC. Interrupt rating: 1,000 Amperes DC. Sold 2 per pack.

379304 (5140) 50 amp

Marpac SFE Fuses • Sold 5 per pack.

7-3755 9 amp 7-3760 14 amp 7-3765 20 amp

• Sold 3 per pack.

7-3855 7-3860 7-3865 7-3870 7-3875 7-3880 7-3885 7-3890 7-3895 7-3900

2 amp 3 amp 4 amp 5 amp 7.5 amp 10 amp 15 amp 20 amp 25 amp 30 amp

Marpac AGA and AGC Fuses • Sold 5 per pack.

7-3675 7-3680 7-3685 7-3690 7-3695 7-3700 7-3705 7-3710 7-3715 7-3720 7-3725 7-3730 7-3735 7-3740 7-3745 7-3795 7-3750

AGA AGA AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC AGC

20 amp 30 amp 1 amp 1.5 amp 2 amp 2.5 amp 3 amp 4 amp 5 amp 7.5 amp 10 amp 15 amp 20 amp 25 amp 30 amp 40 amp 50 amp

ELECTRICAL

Marpac ATO Fuses

145

Battery Switches

Marpac Battery Selector Switch

• Select from battery bank 1, battery bank 2 or both for charging or emergency starting. • Rated at 300 amps. • Uses up to 4/0 AWG battery cables. • Meets all ABYC requirements, UL listed UL 1107. • Meets external ignition requirements for UL 1500 and SAE J1171.

• • • • • •

230 amps continuous, 345 amps momentary. 4 position switch. For use with two or more batteries. 6/12/24/32 Volts DC. Ignition protected. 2 year warranty.

7-0379

7-0380

Marpac Battery Selector Switch • • • •

Ignition protected. For use with systems under 50 volts. 250 amps continuous, 360 amps intermittent. For use with two or more batteries – for single or dual engine systems. • Manufactured for Marpac by Perko. • 5 year warranty.

7-0378

Perko Compact, Medium Duty Battery Switches • Battery selector switch. • Ignition protected. • For use with 12, 24 and 32 volt marine electrical systems.

542530 (8511 DP) • Main battery disconnect switch. • Ignition protected. • For use with 12, 24 and 32 volt marine electrical systems.

543987 (9611 DP)

Cole Hersee Master Disconnect Switches • Brass case with chrome plated lever. • Brass mounting stem 3/4" diameter x 1-13/32" long. • Fits panels up through 15/16" thick. For 6-36 VDC. • Single pole, two positions: Off-On. • Disconnect battery circuit only. • 175 amps continuous, 800 amps intermittent, 15 seconds ON, 5 minutes OFF.

300551 (M-284-01) S.P.S.T.

ELECTRICAL

• • • •

Double pole, two positions: Off-On. Disconnect battery circuit and field circuit. Large stud – 125 amps continuous, 1,000 amps intermittent. Small stud – 20 amps continuous, 15 seconds ON, 5 minutes OFF.

300560 (M-289) D.P.S.T.

146

Cole Hersee Battery Selector Switch • Durable, fracture resistant, high temperature engineered plastic case, knob and insulator. • Vaporproof, waterproof, dustproof and corrosion resistant. • Three 3/8" diameter heavy duty copper stud terminals with brass hex nuts. • May be surface mounted or installed through a panel with a 3-5/16" diameter hole. • Flange diameter 6" and overall height 2-5/8". • Rated 310 amps continuous, 500 amps intermittent.

300765 (M-750)

Battery Switches

Blue Sea Systems Battery Switch • • • • • •

Ignition protected. Case design allows surface or rear panel mounting. Accepts up to 4/0 AWG battery cables. Red switch. 350A Continuous/600A Intermittent. 48 volts DC maximum.

379775 (9003E)

Blue Sea Systems Dual Circuit Plus™ Battery Switch • 350 Ampere continuous rating for inboard gasoline and diesel engines. • Tin-plated copper studs for maximum conductivity and corrosion resistance. • Studs accept 3/8” (M10) ring terminals. • 7/8” stud length accepts multiple cable terminals. • Blue Sea Systems one-piece terminal stud design never loosens over time. • Case design allows surface or rear panel mounting options. • Fits most Perko and Guest low amperage battery switch hole patterns. • Tactile indicator conveys knob position by feel.

379761 (5511E)

Blue Sea Systems Battery Selector Switch • • • • • •

NEW

Ignition protected. Case design allows surface or rear panel mounting. Accepts up to 4/0 AWG battery cables. Red switch. 350A Continuous/600A Intermittent. 48 volts DC maximum.

379771 (9001E)

Blue Sea Systems Mini Battery Switches • Ignition protected. • Case design allows surface, front panel, or rear panel mounting. • 6 ICON label set included for circuit identification. • Accepts up to 4/0 AWG battery cables. • Red switch.

• A complete two battery bank management solution. • Dual Circuit Plus Battery Switch isolates engine and house circuits, and combines battery banks for emergency starting. • The 120 Amp SI ACR automatic charging relay combines batteries for charging.

379773 (7650)

• 300A Continuous/500A Intermittent. • 48 volts DC maximum.

379696 (6007) 379759 (6006) 379758 (6005) • 300A Continuous/450A Intermittent. • 32 volts DC maximum.

379698 (6011) ELECTRICAL

Blue Sea Systems Add A Battery

379759 379758

147

Blue Sea Systems Fuse Block Systems and Fuses

Blue Sea Systems Screw Terminal Glass Fuse Block with Cover

Blue Sea Systems MEGA Fuse Block

• Clear insulating cover with label recesses accept large format labels. • Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit. • Accepts AGC, MDL and all other 3AG Glass Fuses. • 32 volts DC maximum. • 6 circuit with negative bus.

• Insulating cover with breakouts allow wire access in any direction. • For use on systems up to 32V DC. • 5/16" stud terminals accept 5/16” (M8) ring terminals, 14 AWG to 2/0 AWG wire.

379366 (5015)

Blue Sea Systems ANL Fuse Block

379380 (5001)

• Insulating cover with breakouts allow wire access in any direction. • For use on systems up to 32V DC. • Large 5/16"-18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG wire. • Maximum Amperage: 300 Amperes DC.

379455 (5005)

Blue Sea Systems Screw Terminal Blade Fuse Blocks with Cover • Clear insulating cover with label recesses accept small format labels. • Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. • Accepts ATO and ATC fast acting blade fuses. • 20 write-on circuit labels included. • 32 volts DC maximum.

380017 (5025) 380018 (5026)

6 Circuit with Negative Bus 12 Circuit with Negative Bus

Blue Sea Systems ANL Fuses • Ignition protected - Safe for installation aboard gasoline powered boats. • Silver-plated connector blades for corrosion resistance. • Visible indication of blown condition. • 6,000 Ampere Interrupt Capacity.

379479 379480 379483 379495 379506 379518 379280 379285 379290 379295

(5122) (5123) (5124) (5125) (5127) (5129) (5131) (5133) (5136) (5137)

50 Ampere 60 Ampere 80 Ampere 100 Ampere 150 Ampere 200 Ampere 250 Ampere 300 Ampere 400 Ampere 500 Ampere

Blue Sea Systems MEGA Fuses ELECTRICAL

• Most economical fuse for 100 to 300 Ampere circuit protection. • 2,000 Ampere Interrupt Capacity.

379392 (5101) 379405 (5103)

148

100 Ampere 150 Ampere

Blue Sea Systems Electrical Products

Blue Sea Systems PowerPost Plus Cable Connectors • 150 Ampere bus allows small wire connections at high amperage cable connections.

379859 (2102) 5/16” x 3/4” Stud 379861 (2103) 3/8” x 3/4” Stud

Blue Sea Systems PowerPost High Amperage Cable Connectors

Blue Sea Systems PowerBar 600 Ampere Common Bus Bar

• Highest ampere rated busbar with 3/8” terminal studs. • Continuous rating 545 Amps AC/600 Amps DC. • Voltage maximum operating 300 Volts AC/48 Volts DC.

379862 (2104) 4 x 3/8-16 Stud Terminal

• Connect high amperage cables securely.

Blue Sea Systems MiniBus 100 Ampere Common Bus Bars

379863 (2003) 3/8” x 7/8” Stud 379864 (2011) 1/4” x 3/4” Stud 379865 (2002) 5/16” x 7/8” Stud

• Continuous rating: 100 Amperes AC/DC. • 48 volts DC maximum. • 300 volts AC maximum.

Blue Sea Systems DualBus Plus 150 Ampere Common Bus Bars • Continuous rating: 130 Amperes AC, 150 Amperes DC. • 48 volts DC maximum. 300 volts AC maximum.

379835 (2723) 5/16” Stud, 5 x 10-32 Screw Terminal 379847 (2722) 1/4” Stud, 5 x 10-32 Screw Terminal

NEW

379784 (2304) 5 x 8-32 Screw Terminal 379796 (2305) 4 x 10-32 Stud Terminal

Blue Sea Systems 150 Ampere Common Bus Bar • • • •

Continuous rating: 130 Amperes AC, 150 Amperes DC. 48 volts DC maximum. 300 volts AC maximum. 10 x 8-32 screw terminal.

379782 (2301) 379783 (2303)

10 x 8-32 Screw Terminal 4 x 1/4” Stud Terminal

Blue Sea Systems DualBus 100 Ampere Common Bus Bars 379809 379811 379962 379974

(2701) 5 x 8-32 Screw Terminal (2702) 10 x 8-32 Screw Terminal (2709) Cover for 379809 (2701) (2710) Cover for 379811 (2702)

Blue Sea Systems 30 Ampere Terminal Blocks • Continuous rating: 30 Amperes AC/DC. • Voltage rating: 600 volts AC/DC maximum.

379866 379873 379885 379897 379902 379906

(2502) 2 Circuits (2504) 4 Circuits (2506) 6 Circuits (2508) 8 Circuits (2510) 10 Circuits (2512) 12 Circuits

ELECTRICAL

• Continuous rating: 100 Amperes AC/DC. • 48 volts DC maximum. 300 volts AC maximum.

149

Ignition Switches and Push Button Switches

Cole Hersee Igntion Switch • • • •

Universal heavy duty battery ignition and start switch. Keyed alike tumbler lock 4 position ignition-starter switch. Zinc die cast case, coded tumbler lock. Max. panel thickness 3/8”.

300513 (9579-02)

Cole Hersee Igntion Switch • • • • • •

All brass construction. 2 positions: Off-on. 2 screw terminals. Rated: 10 amps at 12V DC. Brass mounting stem 13/16"-24, 1-7/32" long. Accommodates panels to 1".

300668 (M-489-BP)

Cole Hersee Igntion Switch

Cole Hersee Switch Cover

• All brass construction with spring return of start to ignition position. • 3 positions: Off-ignition-start. • 3 screw terminals. • Rated: 10 amps at 12V DC. • Brass mounting stem 13/16"-24, 1-7/32" long. • Accommodates panels to 1".

• Weather resistant rubber boot & mounting nuts. • Chrome plated brass. • Thickness: 17/32". • Thread: 13/16"-24. • Fits 300668 (M-489) and 300688 (M-550) ignition switches.

300688 (M-550-BP)

300810 (M-83288)

Cole Hersee Push Button Switch

Cole Hersee Push Button Switch • • • • • •

Non-corrosive construction. Moisture repellent insulators. 2 positions: Off-momentary on. Rated: 10 amps at 12V DC. Mounting stem 5/8"-32, 1" long. Fits panels to 3/4" thick.

300664 (M-485-BP)

Cole Hersee Push Button Switch ELECTRICAL

• • • • • •

Non-corrosive construction. Moisture repellent insulators. 2 positions: Off-momentary on. Rated: 35 amps at 12V DC. Mounting stem 5/8"-32, 1-3/8" long. Fits panels to 1" thick.

300741 (M-626-BP)

• Plasticized body sealed against moisture and dirt. • 2 positions: Off-momentary on. • Two 18 gauge wire leads, 12" long. • Mounting stem 5/8"-32, 15/16" long. • Fits panels to 1/2" thick.

300727 (M-608-BP)

Cole Hersee Push Button Switch • • • • •

Non-corrosive construction. Moisture repellent insulators. 2 positions: Off-momentary on. Mounting stem 5/8"-32, 1-3/8" long. Fits panels to 1" thick.

300739 (M-612-BP)

Cole Hersee Switch Cover • Cap is permanently fastened to mounting nut by rolled brass bezel. • Durable, resilient rubber cap. • Deep threaded 5/8"-32 aluminum mounting nut assures positive seal. • Fits M-485, M-608 and M-626 push button switches.

300805 (M-83280-03) Black

150

Push-Pull Switches

Cole Hersee Push-Pull Switch

• • • • • •

All brass construction. 3 positions: Off-on #1-on #1 and #2. Normally off. 3 screw terminals. Rated: 10 amps at 12V DC. Mounting stem 3/8"-32 thread, 1-1/4" long. Mount in panels up through 1" thick.

300640 (M-476-BP)

All brass construction. 2 positions: Off-on. Normally off. 2 screw terminals. Rated: 10 amps at 12V DC. Mounting stem 3/8"-32 thread, 1-1/4" long. Mounts in panels up through 3/4" thick.

300652 (M-482-BP)

Cole Hersee Push-Pull Switch • • • • • •

Plasticized body sealed against moisture and dirt. 2 positions: Off-on. Normally off. Two 18 gauge insulated copper wire leads, 12" long. Rated: 10 amps at 12V DC. Mounting stem 3/8"-32 thread, 1-1/4" long. Mounts in panels up through 5/8" thick.

300715 (M-606-BP)

Rocker Switches

Marpac Contura Rocker Switches

Blue Sea Systems Waterproof Contura Switches

• Non-illuminated black plastic rocker switch. • Rated: 20 amps at 12V DC.

7-0535 7-0536 7-0537 7-0538 7-0539

2 Position 2 Position 3 Position 3 Position 3 Position

379760 379772 379780 379467

On-Off Off-Momentary On On-Off-On Mom. On-Off-Mom. On On-Off-On (6 Terminal)

(8232) 3 Position On-Off-On SPDT (8231) 2 Position Off-Mom. On SPST (8230) 2 Position Off-On SPST (5020) Fuse Holder - 3 AG

• Illuminated black plastic rocker switch. • Rated: 20 amps at 12V DC.

2 Position 2 Position 3 Position 3 Position 3 Position

On-Off Off-Momentary On On-Off-On Mom. On-Off-Mom. On On-Off-On

SPST SPST SPDT DPST DPDT

Rocker Switch

ELECTRICAL

7-0540 7-0541 7-0542 7-0543 7-0544

Fuse Holder

7-0540 7-0536

151

Toggle Switches

Blue Sea Systems WeatherDeck Toggle Switch Boot

Blue Sea Systems WeatherDeck Toggle Switches

• Replaces dress nut for mounting on WeatherDeck Panel Switches. • Thread material: Nickel-plated brass. • Case material: UV resistant silicone rubber. • Thread: 15/32”. • Black.

• Single pole. • Nickel-plated brass and phenolic non-corrosive construction. • Rated: 15 amps at 12V DC. • Terminal size: 1/4”. • Terminal type: Quick connect tab.

379406 (4138)

379407 379408 379409 379410 379411

Cole Hersee Heavy Duty SPST Toggle Switch • • • • • •

(4150) Single Throw (4151) Single Throw (4152) Double Throw (4153) Double Throw (4154) Double Throw

Off-On Off-Mom. On On-Off-On Mom. On-Off-On Mom. On-Off-Mom. On

Cole Hersee Toggle Switch Seal

Golden dichromate dip housing. 2 brass screw terminals. Chrome plated brass handle 1-1/16" long. 2 positions: Off-on. Stem mounting: 15/32"-32 thread. Fits panels through 3/16" thick.

• Rubber boot bonded to brass nut with 15/32"-32 thread. • Fits standard handles up to 11/16". • For 539683 (514 DP) and 300690 toggle switches.

300800 (M-81264-BP)

300703 (M-594)

Cole Hersee Medium Duty SPST Toggle Switch • • • • • • •

Phenolic housing with plated steel frame. Chrome plated brass handle, facenut and mounting stem. Single pole. 2 screw terminals. 2 positions: Off-on. Stem mounting: 15/32"-32 thread. Fits panels through 9/32" thick.

Blue Sea Systems Toggle Guard • Protects circuit breakers from being accidentally switched ON or OFF. • Fits all A-Series single pole circuit breakers. • Fits all panel switches. • Can be used on any brand of circuit breaker panel using standard toggle type circuit breakers.

379950 (4100)

300690 (M-484)

Red Indicator Lights

ELECTRICAL

Cole Hersee Red Indicator Light with Multi Faceted Lens

Cole Hersee Red Indicator Light with Smooth Lens

• • • •

Insulated. Double contact. Plated brass bezel 1-1/4" diameter. Supplied with 12 volt bulb.

300602 (M-326-RC-BP)

152

Insulated. Single contact with ground wire for use on insulated panels. Chrome plated brass bezel 7/8" diameter. Supplied with 12 volt bulb.

300587 (M-320-RC-BP)

Stainless Steel Fasteners (Display Package)

Marpac Phillips Pan Sheet Metal Screws

Marpac Phillips Oval Sheet Metal Screws

• Stainless steel.

7-5200 7-5205 7-5210 7-5215 7-5220 7-5225 7-5230 7-5235 7-5240 7-5245 7-5250 7-5255 7-5260 7-5261 7-5265

4 x 1/2 6 x 1/2 6 x 3/4 8 x 1/2 8 x 3/4 8x1 8 x 1-1/2 10 x 1/2 10 x 3/4 10 x 1 10 x 1-1/2 12 x 1 12 x 1-1/2 12 x 2 14 x 1

6 Per Card 8 Per Card 8 Per Card 7 Per Card 7 Per Card 6 Per Card 5 Per Card 6 Per Card 6 Per Card 5 Per Card 4 Per Card 4 Per Card 3 Per Card 3 Per Card 3 Per Card

Marpac Phillips Oval Machine Screws with Nut

7-5270 7-5275 7-5275 7-5280 7-5284 7-5285 7-5290 7-5295 7-5300 7-5305 7-5310 7-5315 7-5320 7-5325 7-5330 7-5335 7-5340 7-5345 7-5350 7-5355

6 x 1/2 6 x 3/4 6 x 3/4 6x1 8 x 1/2 8 x 3/4 8x1 8 x 1-1/4 8 x 1-1/2 10 x 3/4 10 x 1 10 x 1-1/4 10 x 1-1/2 10 x 2 12 x 1 12 x 1-1/2 12 x 2 14 x 1-1/2 14 x 2 14 x 2-1/2

8 Per Card 8 Per Card 8 Per Card 7 Per Card 4 Per Card 7 Per Card 6 Per Card 6 Per Card 5 Per Card 6 Per Card 5 Per Card 5 Per Card 4 Per Card 4 Per Card 4 Per Card 3 Per Card 3 Per Card 3 Per Card 2 Per Card 2 Per Card

• Stainless steel.

6-32 x 1 8-32 x 1 8-32 x 1-1/2 10-24 x 1 10-24 x 1-1/2 10-24 x 2 10-24 x 3 1/4-20 x 1 1/4-20 x 1-1/2 1/4-20 x 2 1/4-20 x 3 1/4-20 x 4

6 Per Card 5 Per Card 4 Per Card 4 Per Card 4 Per Card 3 Per Card 2 Per Card 5 Per Card 2 Per Card 2 Per Card 2 Per Card 2 Per Card

Marpac Phillips Pan Machine Screws with Nut • Stainless steel.

7-5410 7-5415 7-5420 7-5425 7-5430 7-5435 7-5440 7-5445 7-5447

8-32 x 1 8-32 x 1-1/2 10-24 x 1 10-24 x 1-1/2 10-24 x 2 1/4-20 x 1-1/2 1/4-20 x 2 1/4-20 x 3 1/4-20 x 4

6 Per Card 5 Per Card 5 Per Card 4 Per Card 4 Per Card 3 Per Card 3 Per Card 2 Per Card 2 Per Card

153

GENERAL ACCESSORIES

7-5360 7-5365 7-5370 7-5375 7-5380 7-5385 7-5387 7-5390 7-5395 7-5400 7-5405 7-5407

Stainless Steel Fasteners (Display Package)

Marpac Flat Washers

Marpac Lock Washers

• Stainless steel.

7-5450 7-5455 7-5460 7-5465

#6 #8 #10 1/4”

50 Per Card 50 Per Card 25 Per Card 15 Per Card

Marpac Finishing Washers • Stainless steel.

7-5490 7-5495 7-5500 7-5505

#6 #8 #10 1/4”

20 Per Card 18 Per Card 15 Per Card 7 Per Card

7-5470 7-5475 7-5480 7-5485

#6 #8 #10 1/4”

40 Per Card 40 Per Card 25 Per Card 15 Per Card

Marpac Finished Hex Nuts • Stainless steel.

7-5520 10-24 7-5525 1/4-20

12 Per Card 10 Per Card

Marpac Nylon Lock Nuts • Stainless steel.

7-5530 8-32 7-5535 10-24 7-5540 1/4-20

Marpac Wing Nut

4 Per Card 4 Per Card 3 Per Card

• Stainless steel.

7-5555 1/4-20

3 Per Card

Marpac Well Nuts • Stainless steel.

Marpac Hex Head Cap Screws • Stainless steel.

7-5770 7-5575 7-5580 7-5585 7-5590

1/4-20 x 1 1/4-20 x 1-1/2 1/4-20 x 2 1/4-20 x 2-1/2 1/4-20 x 3

3 Per Card 2 Per Card 2 Per Card 2 Per Card 2 Per Card

7-5560 1/4-20 x 5/8” 7-5565 1/4-20 x 1” 7-5566 10-24 x 3/4”

3 Per Card 2 Per Card 3 Per Card

Marpac License Plate Nuts and Bolts • Stainless steel.

GENERAL ACCESSORIES

7-5595 1/4-20 x 5/8”

154

4 Per Card

Stainless Steel Fasteners

Phillips Head Self-Tapping Screws

Phillips Head Machine Screws

• Sold in boxes of 100 only.

Pan Oval 727012 727025

Pan 729523 729535 729559 729561 729563 729597 729612 729615 729650 729662 729686 729698 729725 729737 729749 729751 729775

727101 727114 727125 727137 727149 727151 727175 727184 727199 727202 727214 727223 727238

727252 727264 727276 727288 727290

727327 727339 727341 727353 727365 727377

727531 727539 727555 727567 727580 727590 727606 727611 727620 727632 727644 727656 727660 727670 727680 727694 727707 727719 727721 727733 727738 727757 727769 727770 727783 727795 727800 727808 727820 727834 727846 727858 727860 727872 727884

728038 728045 728053 728064 728070 728075 728103 728109 728127 728139 728141 728153 728164 728177 728180 728191 728204 728216 728228 728235 728239 728241 728245 728258 728266 728278 728280 728285 728289 728329 728331 728343 728355 728365 728370

#4 x 1/2” #4 x 3/4” #4 x 1” #6 x 3/8” #6 x 1/2” #6 x 5/8” #6 x 3/4” #6 x 1” #6 x 1-1/4” #6 x 1-1/2” #8 x 1/2” #8 x 5/8” #8 x 3/4” #8 x 1” #8 x 1-1/4” #8 x 1-1/2” #8 x 2” #10 x 1/2” #10 x 5/8” #10 x 3/4” #10 x 1” #10 x 1-1/4” #10 x 1-1/2” #10 x 2” #10 x 2-1/2” #10 x 3” #12 x 3/4” #12 x 1” #12 x 1-1/4” #12 x 1-1/2” #12 x 2” #12 x 2-1/2” #12 x 3” #14 x 3/4” #14 x 1” #14 x 1-1/4” #14 x 1-1/2” #14 x 2” #14 x 2-1/2” #14 x 3”

Oval 728521 728533 728557 728560 728585 728595 728610 728622 728646 728658 728672 728684 728711 728723 728735 728747 728761

Flat 729030 729053 729078 729080 729092 729117 729129 729155 729167 729181 729193 729220 729232 729244 729256 729270

6-32 x 3/4” 6-32 x 1” 6-32 x 1-1/2” 8-32 x 1/2” 8-32 x 3/4” 8-32 x 1” 8-32 x 1-1/2” 8-32 x 2” 10-24 x 3/4” 10-24 x 1” 10-24 x 1-1/2” 10-24 x 2” 1/4-20 x 3/4” 1/4-20 x 1” 1/2-20 x 1-1/2” 1/2-20 x 2” 1/2-20 x 3”

Standard Hex Nuts • Sold in packs of 100 unless otherwise noted.

730300 730312 730324 730336 730348 730350 730363

6-32 8-32 10-24 1/4”-20 5/16”-18 3/8”-16 1/2”-13

50 Per Pack

Heavy Hex Nuts • Sold each.

730742 1-1/8”-7

Nylon Lock Nuts • Sold in packs of 100 unless otherwise noted.

730401 730413 730425 730437 730449 730451 730464

6-32 8-32 10-24 1/4”-20 5/16”-18 3/8”-16 1/2”-13

50 Per Pack

155

GENERAL ACCESSORIES

727033 727036 727040 727050 727062 728068

Flat 728014 728019 728024

Stainless Steel Fasteners

Hex Head Bolts

Cap Nut

• Sold in boxes of 100, 50 or 25 as noted.

• Sold in packs of 100.

730007 730019 730021 730033 730044 730057 730071 730083 730095 730108 730110 730122 730134 730137 730146 730148 730158 730161 730173 730185 730197 730209 730211 730223 730247

730540 1/4”-20

1/4”-20 x 1 1/4”-20 x 1-1/2” 1/4”-20 x 2” 1/4”-20 x 2-1/2” 1/4”-20 x 3” 5/16” x 1” 5/16” x 1-1/2” 5/16” x 2” 5/16” x 2-1/2” 5/16” x 3” 3/8” x 1” 3/8” x 1-1/2” 3/8” x 2” 3/8” x 2-1/2” 3/8” x 3” 3/8” x 3-1/2” 3/8” x 4” 1/2” x 1” 1/2” x 1-1/2” 1/2” x 2” 1/2” x 2-1/2” 1/2” x 3” 1/2” x 3-1/2” 1/2” x 4” 1/2” x 6”

100 Per Pack 100 Per Pack 100 Per Pack 100 Per Pack 100 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 50 Per Pack 25 Per Pack 25 Per Pack 25 Per Pack 25 Per Pack 25 Per Pack 25 Per Pack 25 Per Pack 25 Per Pack

Flat Washers • Sold in packs of 100 unless otherwise noted.

730805 730817 730829 730831 730843 730855 730868 730878

#6 #8 #10 1/4” 5/16” 3/8” 1/2” 5/8”

50 Per Pack 50 Per Pack

Lock Washers • Sold in packs of 100.

730956 730968 730970 730982 730994 731009 731011

#6 #8 #10 1/4” 5/16” 3/8” 1/2”

Fender Washers • Sold in packs of 100.

Stainless Steel All Threaded Rod

730906 730918 730920 730932 730944

• Length 3’. • Sold each.

Finishing Washers

731479 731481 731483 731485 731487 731489 731491

10-24 1/4-20 5/16-18 3/8-16 1/2-13 5/8-11 3/4-10

3/16” x 1” OD 1/4” x 1” OD 1/4” x 1-1/4” OD 5/16” x 1-1/2” OD 1/2” x 2” OD

• Sold in packs of 100.

731023 731035 731047 731048 731058

#6 #8 #10 #12 1/4”

GENERAL ACCESSORIES

Marpac Stainless Steel Cotter Pins 156

• Assorted sizes. 8 per display pack.

7-5000

Canvas Fasteners

Marpac Twist Stud Screw

Marpac Twist Stud Two Hole

• Sold 2 per bag.

7-6208

7-6199

Marpac 11/64 Barrel & Socket • Sold 6 sets per bag.

7-6178

Marpac 1/4 Barrel and Socket • Sold 6 sets per bag.

Marpac Stud Eyelet

7-6175

• Sold 6 sets per bag.

Marpac Eyelet and Washer

7-6181

• Sold 4 sets per bag.

7-6205

Wood Screw Studs 542770 (560128) #8-15 SMS 7-6190 #7 x 3/8”

100 Per Package 6 Per Bag

S & J Stud for Canvas • Sold 100 per package.

543353 (560618)

Marpac Phillips Machine Screw Stud • Sold 5 per bag.

7-6196 #10-32 x 3/8”

S & J Socket • Sold 100 per package.

543315 (560588)

S & J Stud #8 Wood Screw

S & J Button

• Sold 2 per bag.

• Nickel plated brass. • Sold 100 per package.

543290 (560578)

Marpac “Dot” Type Fastener Installation Tool • Easy to use. • Complete instructions included.

385686 (560041)

Marpac Snap Caps • Sold 10 per bag.

7-6050 7-6055 7-6060 7-6065

Fits Screw Sizes #6 and #8 Fits Screw Sizes #6 and #8 Fits Screw Sizes #10 and #12 Fits Screw Sizes #10 and #12

White Black White Black

157

GENERAL ACCESSORIES

7-6211

Cotter Pins and Quick Pins

Stainless Steel Cotter Pins

• Sold in packs of 100 unless otherwise noted.

7-5005 7-5010 7-5015 7-5020 7-5040 7-5045 7-5060 7-5065 7-5070 7-5075 7-5080 7-5085 7-5090 7-5095 7-5100

731302 731314 731316 731338 731364 731403

1/8” x 1” 1/8” x 1-1/2” 1/8” x 2” 5/32” x 1-1/2” 3/16” x 2” 1/4” x 3”

1/16” x 1/2” 1/16” x 3/4” 1/16” x 1” 1/16” x 1-1/2” 3/32” x 1” 3/32” x 1-1/2” 1/8” x 1” 1/8” x 1-1/4” 1/8” x 1-1/2” 1/8” x 1-3/4” 1/8” x 2” 1/8” x 2-1/2” 5/32” x 1-1/2” 5/32” x 2” 5/32” x 2-1/2”

24 Per Package 18 Per Package 18 Per Package 10 Per Package 8 Per Package 6 Per Package 6 Per Package 4 Per Package 4 Per Package 4 Per Package 3 Per Package 3 Per Package 3 Per Package 3 Per Package 2 Per Package

Threadlocker, Thread Sealant and Anti-Seize Lubricant

Permatex High Strength Threadlocker - Red • OEM specified. • High strength threadlocker for heavyduty applications. • Well-suited for permanently locking studs and press fits.

545030 (27100) 6 ml Tube

Permatex High Temperature Thread Sealant • OEM specified. • Locks and seals threaded fittings. • Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels.

545054 (59214) 6 ml Tube

Permatex Anti-Seize Lubricant • A highly refined blend of aluminum, copper and graphite lubricants. • Temperature range: -60° F to 1600° F. • Salt, corrosion and moisture resistant - ideal for marine use.

545105 (80078) 8 oz. Brush-Top Bottle 545131 (81343) 1 oz. Carded Tube

GENERAL ACCESSORIES

158

3M Dual Lock Reclosable Fastener Systems • Polypropylene reclosable fastener. • Ideal for mounting or attaching weighty obects to surfaces. • Acrylic adhesive performs well up to 200 degrees F.

886688 (06463) Clear 886690 (06484) Black

1” x 5 yds. 1” x 5 yds.

Rope and Rope Accessories

Twisted Nylon Rope

Solid Braid Nylon Rope

• Excellent for anchor lines, mooring and dock lines because this fiber absorbs sudden shock loads that could snap ropes made of other fibers or cause damage to boat fittings.

701114 701127 701130 701143 701156 701169 701171

701404 701417 701426 701433 701446 701459 701463 701474 701486 701498 701501 701525 701549

(10975) (10987) (10999) (11001) (11011) (11018) (11022) (11025) (11034) (11046) (11049) (NTR20600-01) (NTR24600-01)

Dia. 1/4” Dia. 5/16” Dia. 3/8” Dia. 7/16” Dia. 1/2” Dia. 5/8” Dia. 3/4” Dia. 3/4” Dia. 7/8” Dia. 1” Dia. 1” Dia. 1-1/4” Dia. 1-1/2”

Length 600’ Length 600’ Length 600’ Length 600’ Length 600’ Length 600’ Length 300’ Length 600’ Length 600’ Length 300’ Length 600’ Length 600’ Length 600’

(10046) (10071) (10093) (10128) (10151) (10172) (10188)

Diameter 1/8” Diameter 5/32” Diameter 3/16” Diameter 1/4” Diameter 5/16” Diameter 3/8” Diameter 1/2”

Length 600’ Length 500’ Length 475’ Length 500’ Length 500’ Length 500’ Length 500’

Twisted Polypropylene Rope - Yellow 701707 701723 701749 701765 701789 701804

(14986) (15002) (15019) (15034) (15038) (15042)

Diameter 1/4” Diameter 5/16” Diameter 3/8” Diameter 1/2” Diameter 5/8” Diameter 3/4”

Length 600’ Length 600’ Length 600’ Length 600’ Length 600’ Length 600’

Star Brite Dip-It Whip-It - White • • • • •

The quick and easy way to finish rope ends. Prevents unraveling. Forms a permanent, flexible coating. Excellent for manila, nylon and poly ropes. Whips any thickness rope end.

460662 (84904) 4 fl. oz.

Twisted Polypropylene Rope - Black • Cuts and seals the ends of synthetic ropes in one fast movement. • Runs on 120 volts. • Comes with a 5' cord.

7-2753 Cutting Gun 7-2766 Blade Only

303901 Diameter 1/4” 303949 Diameter 3/8” 303955 Diameter 7/8”

Length 600’ Length 600’ Length 600’

Heavy Duty Shock Cord 721604 721628 721642 721666 721680

3/16” x 100’ 1/4” x 100’ 5/16” x 100’ 3/8” x 100’ 1/2” x 100’

159

GENERAL ACCESSORIES

Marpac Electric Cutting Gun

Chains and Anchor Shackles

Proof - Coil Galvanized Chain - Drum

Screw Pin Anchor Shackles

• Hot dipped galvanized proof coil welded chain.

616055 616043 616079 616067 616093 616081 616118 616132 616156 616144 616170 616168 616173 616182 616194 616206

617641 5/16” 617694 1/2”

Length 275’ Length 200’ Medium Link

Proof - Coil Galvanized Chain - Pail • Hot dipped galvanized proof coil welded chain. • Sold in 5 gallon buckets.

271391 271393 271395 271397

3/16” 1/4” 5/16” 3/8”

Length 250’ Length 141’ Length 92’ Length 63’

1/4” 1/4” 5/16” 5/16” 3/8” 3/8” 7/16” 1/2” 5/8” 5/8” 3/4” 3/4” 7/8” 1” 1-1/4” 1-1/2”

Sold Each Sold 100 Per Pack Sold Each Sold 100 Per Pack Sold Each Sold 100 Per Pack Sold Each Sold Each Sold Each Sold 50 Per Pack Sold Each Sold 20 Per Pack Sold Each Sold Each Sold Each Sold Each

Screw Pin Anchor Shackles Load Rated 616260 616272 616284 616296 617502 616308 617514

5/16” 3/8” 7/16” 1/2” 5/8” 5/8” 3/4”

3/4 Ton 1 Ton 1-1/2 Ton 2 Ton 3-1/4 Ton 3-1/4 Ton 4-3/4 Ton

Weissenfels Hot Dipped Mooring Chain 620105 620117 620129 620131

(013-100-043) 3/8” x 200’ (013-135-053) 1/2” x 200’ (013-166-063) 5/8” x 164’ (013-200-053) 3/4” x 100’

Hardware

Standard Rope Thimbles • Hot dipped galvanized steel.

615572 5/8” 615611 1” GENERAL ACCESSORIES

160

Sold Each Sold Each

Imported Galvanized Wire Rope Clips 615039 3/16” 615077 5/16” 615091 3/8”

Sold Each Sold Each Sold Each

Sold 25 Per Pack Sold Each Sold Each Sold Each Sold Each Sold 10 Per Pack Sold Each

Packing Boxes

Buck-Algonquin Packing Box - Complete Assembly

Buck-Algonquin Heavy Duty Stud Type Packing Boxes

• • • • •

• Cast bronze plain finish. • Complete with hose and clamps.

A complete assembly includes all parts shown (2 clamps). The nut, spud and body are finely machined cast bronze. Hose is 5 ply marine exhaust hose. Clamp is all stainless steel up to and including 1-1/4" sizes. Larger sizes have heavy duty malleable iron clamp with rustproof plating.

541513 (PB-100) Shaft Size 1”

622263 Shaft Size 1-3/4” 622274 Shaft Size 2”

Hose End ID 3-1/2” Hose End ID 3-1/2”

Hose End ID 1-3/4”

Buck-Algonquin Tournament Regualr Rudder Port 622541 Shaft 1-1/2”

Mnt. Flange 4” x 4”

Length 6”

Buck-Algonquin Regular Rudder Port • Cast bronze plain finish. • Inside mount. Length 5”

Johnson Rubber Co. Stuffing Box • Johnson Stuffing Boxes are heavy duty units fitted with a water inlet for stern-tube bearing lubrication. • Mounting flange incorporate a pilot ring which intrudes into the shaft housing to exert necessary compression on the bearing staves to lock them in position. • An inflatable air seal allows gland to be serviced which vessel is afloat. • Units available for water lubrication or combination water-grease lubrication.

427840 (1790M-0278) Brass - 2-7/8”

161

GENERAL ACCESSORIES

261658 Shaft 2” Mnt. Flange 4-1/4” x 7-1/4”

Marine Packing

Square Flax Packing

Duramax Ultra-X Packing

379912 379924 379936 379948

• Dissipates frictional heat, over 5 times more thermally conductive than flax and PTFE. • Grease-free installation. • Virtually eliminates shaft scoring-stays pliable, never hardens or becomes abrasive. • Leakage practically eliminated. • Lasts over 5 times longer than other packing.

3/16” x 3’ 1/4” x 3’ 5/16” x 3’ 3/8” x 3’

• Ten Pound Box.

380054 380042 380066 380078 380082 380106 380117 380129 380131 380143

3/16” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1-1/8”

Approx. 55.50’ Approx. 32’ Approx. 20.41’ Approx. 14.22’ Approx. 8’ Approx. 5.12’ Approx. 3.55’ Approx. 2.61’ Approx. 2’

428810 428815 428820 428825

(X-5/8”) (X-3/4”) (X-7/8”) (X-1”)

5/8” 3/4” 7/8” 1”

10# Box 10# Box 10# Box 10# Box

Teflon (PTFE) Flax Packing • PTFE Flax packing is braided from quality flax rovings which are then impregnated with TEFLON (PTFE). • The result is a quality packing that offers high performance and extended packing life.

380169 380170 380171 380172 380173

(10016) (10017) (10018) (10019) (10021)

3/16” x 2’ 1/4” x 2’ 5/16” x 2’ 3/8” x 2’ 1/2” x 2’

380177 380178 380179 380180

GENERAL ACCESSORIES

162

(10101) (10102) (10103) (10104)

3/16” 1/4” 5/16” 3/8”

Approx. 59’ Approx. 33’ Approx. 21’ Approx. 15’

1/2” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4”

Approx. 82’ Approx. 53’ Approx. 35’ Approx. 24’ Approx. 20’ Approx. 15’ Approx. 12’

• Ten Pound Spools.

• It keeps bilges clean and helps to meet current environmental requirements. • Runs cool, even at high shaft speeds, because it dissipates frictional heat. • It is over four times more thermally conductive than flax. • With only minimal thermal expansion, GFO fiber packing easily handles high shaft speeds without being consumed or destroyed.

(ML4002) 1-1/2” (ML4002) 1-1/4” (ML10262G10) 1/2” (ML10262I10) 5/8” (ML10262K10) 3/4” (ML10262M10) 7/8” (ML10262O10) 1”

• This popular shaft packing is a blend of quality flax rovings that are braided to a high quality standard. • The braid is then impregnated with TEFLON (PTFE) to give it a low surface friction. • This combination results in a packing that delivers solid performance, season after season. • One Pound Spools.

Gore Tex Packing

318282 318283 318255 318267 318279 318293 318281

Teflon (PTFE) Flax Packing

25# Box

Appox. 25’

10# Box

Appox. 61’

10# Box

Appox. 39’

10# Box

Appox. 27.9’

10# Box

Appox. 21’

10# Box

Appox. 16.3’

380183 380184 380185 380186 380187 380188 380189

(10315) (10316) (10317) (10318) (10319) (10320) (10321)

Packing Puller Flexible Shaft 261812 (10160) Small - Size 1 261824 (10161) Medium - Size 2 261836 (10162) Large - Size 3

Rubber Sleeve Bearings

Johnson Rubber Co. Water Lubricated Rubber Sleeve Bearings 427105 427143 427167 427179 427206 427218 427232 427244 427268 427270 427307 427319 427321 427345 427357 427383 427395 427446

Shaft Size 1” Shaft Size 1-1/4” Shaft Size 1-1/4” Shaft Size 1-1/4” Shaft Size 1-1/2” Shaft Size 1-1/2” Shaft Size 1-3/4” Shaft Size 1-3/4” Shaft Size 2” Shaft Size 2” Shaft Size 2-1/4” Shaft Size 2-1/4” Shaft Size 2-1/4” Shaft Size 2-1/2” Shaft Size 2-1/2” Shaft Size 3” Shaft Size 3” Shaft Size 3-1/2”

1-1/2” OD 1-3/4” OD 2” OD 2-1/8” OD 2” OD 2-3/8” OD 2-3/8” OD 2-5/8” OD 2-5/8” OD 3” OD 2-15/16” OD 3-1/8” OD 3-3/8” OD 3-1/8” OD 3-3/8” OD 3-3/4” OD 4” OD 4-1/2” OD

Length 4” Length 5” Length 5” Length 5” Length 6” Length 6” Length 7” Length 7” Length 8” Length 8” Length 9” Length 9” Length 9” Length 10” Length 10” Length 12” Length 12” Length 14”

Globe Drivesaver • Includes: Bushing kits where necessary.

369024 369040 369036 369030 369042

(404A) (504) (4756) (7256) (5756)

Flange Dia. 4”

Coupling Dia. 5”

Flange Dia. 5”

Coupling Dia. 6”

Flange Dia. 4-3/4”

Coupling Dia. 6”

Flange Dia. 7-1/4”

Coupling Dia. 8-3/8”

Flange Dia. 5-3/4”

Coupling Dia. 6-13/16”

Globe Babbit Engine Mounts • Cast moulded from two hardeners of polyurethane. • The softer inner core provides vibration, noise and shock dampening, while the stiff outer shell restricts engine movement.

369045 (M-3) 369048 (M-6) 369050 (M-7)

Johnson Rubber Co. Water Lubricated Rubber Sleeve Bearings 426230 426254 426278 426280 426292 426305 426317 426329 426343 426355 426367 426379 426381 426393 426406 426418 426420 426432 426444 426468 426470 426483 426494 426507 426519 426521 426557 426569 426571 426583 426595 426608 426634 426646 426658 426660 426684 426696 426709 426723 426735 426759 426761 426785 426800 426812 426824

Shaft Size 3/4” Shaft Size 7/8” Shaft Size 1” Shaft Size 1” Shaft Size 1” Shaft Size 1” Shaft Size 1” Shaft Size 1-1/8” Shaft Size 1-1/8” Shaft Size 1-1/8” Shaft Size 1-1/4” Shaft Size 1-1/4” Shaft Size 1-1/4” Shaft Size 1-1/4” Shaft Size 1-3/8” Shaft Size 1-3/8” Shaft Size 1-3/8” Shaft Size 1-1/2” Shaft Size 1-1/2” Shaft Size 1-3/4” Shaft Size 1-3/4” Shaft Size 1-7/8” Shaft Size 2” Shaft Size 2” Shaft Size 2-1/4” Shaft Size 2-1/4” Shaft Size 2-1/2” Shaft Size 2-1/2” Shaft Size 2-3/4” Shaft Size 2-3/4” Shaft Size 3” Shaft Size 3” Shaft Size 3-1/4” Shaft Size 3-1/2” Shaft Size 3-1/2” Shaft Size 3-5/8” Shaft Size 3-3/4” Shaft Size 4” Shaft Size 4” Shaft Size 4-1/2” Shaft Size 4-1/2” Shaft Size 5” Shaft Size 5” Shaft Size 5-1/4” Shaft Size 5-1/2” Shaft Size 5-3/4” Shaft Size 6”

1-1/4” OD 1-3/8” OD 1-1/4” OD 1-3/8” OD 1-1/2” OD 1-5/8” OD 2” OD 1-1/2” OD 1-3/4” OD 2” OD 1-1/2” OD 1-3/4” OD 2” OD 2-1/8” OD 1-7/8” OD 2” OD 2-3/8” OD 2” OD 2-3/8” OD 2-3/8” OD 2-5/8” OD 2-15/16” OD 2-5/8” OD 3” OD 2-15/16” OD 3-1/8” OD 3-1/8” OD 3-3/8” OD 3-3/8” OD 3-3/4” OD 3-3/4” OD 4” OD 4-1/4” OD 4-1/4” OD 4-1/2” OD 4-1/4” OD 5-1/4” OD 5” OD 5-1/4” OD 5-1/2” OD 5-3/4” OD 6-1/8” OD 6-1/2” OD 7” OD 7” OD 7” OD 7-1/2” OD

Length 3” Length 3-1/2” Length 4” Length 4” Length 4” Length 4” Length 4” Length 4-1/2” Length 4-1/2” Length 4-1/2” Length 5” Length 5” Length 5” Length 5” Length 5-1/2” Length 5-1/2” Length 5-1/2” Length 6” Length 6” Length 6” Length 6” Length 8” Length 8” Length 9” Length 9” Length 10” Length 10” Length 11” Length 11” Length 12” Length 12” Length 13” Length 14” Length 14” Length 14-1/2” Length 15” Length 16” Length 16” Length 18” Length 18” Length 20” Length 20” Length 21” Length 22” Length 23” Length 24”

163

GENERAL ACCESSORIES

Flange Bearings Now In Stock. Call Your Sales Rep for Details

Johnson Rubber Co. Sleeve Bearing Specifications Chart

GENERAL ACCESSORIES

164

(A) Shaft or (B) OD Sleeve Size

(D) Wall Thick

Metallic Shell

Non-Metallic Shell

(A) Shaft or (B) OD Sleeve Size

(D) Wall Thick

Metallic Shell

Non-Metallic Shell

3/4" 7/8" 7/8" 7/8" 1" 1" 1" 1" 1" 1" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-1/2" 1-1/2" 1-5/8" 1-5/8" 1-3/4" 1-3/4" 1-7/8" 1-7/8" 2" 2" 2" 2-1/8" 2-1/8" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 23/8" 2-1/2" 2-1/2"

3" 3-1/2" 3-1/2" 3-1/2" 4" 6" 4" 4" 4" 4" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 5" 5" 5" 5" 5-1/2" 5-1/2" 5-1/2" 5-1/2" 6" 6" 6-1/2" 6-1/2" 7" 7" 7-1/2" 7-1/2" 8" 8" 8" 8-1/2" 8-1/2" 9" 9" 9" 9" 9-1/2" 10" 10"

1/8" 1/16" 1/8" 1/8" 1/16" 1/16" 1/16" 1/8" 1/8" 1/8" 1/16" 1/8" 1/8" 1/8" 1/16" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 3/32" 1/8" 1/8" 1/8" 3/32" 1/8" 3/32" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8"

ABLE ACID APEX ATOM BACK BADE BAIT BALE BAND BASE BEAM BELT BEND BILL BIND BIRD BITE BLOW BOAT BOLD BOND BOOT BOSS BRAD BREW BRIM BROW BUCK BULB BULL CALL CAMP CALM CAME CAPE CARE CARD CART CASE COOK CORD CORN

ALDA ALICE ANNE ARDELE BABE – BECKY BETTY CANDY CARLA CEIL CINDY CONNIE CORA DEENA DELLA DORIS DOTTY EDNA ELLEN ELSA ERMA EVA FANNY FLO FRAN GLENDA GLORIA GWEN HANNA HAZEL – HELEN HILDA ILA INEZ IRIS INGRID IRENE JENNY JOAN JOSIE

2-1/2" 2-5/8" 2-3/4" 2-3/4" 2-3/4" 2-7/8" 3" 3" 3-1/8" 3-1/4" 3-1/4" 3-3/8" 3-1/2" 3-1/2" 3-5/8" 3-3/4" 3-3/4" 3-3/4" 3-7/8" 4" 4" 4-1/8" 4-1/4" 4-3/8" 4-1/2" 4-1/2" 4-5/8" 4-3/4" 4-7/8" 5" 5" 5-1/4" 5-1/4" 5-3/8" 5-3/8" 5-1/2" 5-5/8" 5-3/4" 5-7/8" 6" 6-1/2"

10" 10-1/2" 11" 11" 11" 11-1/2" 12" 12" 12-1/2" 13" 13" 13-1/2" 14" 14" 14-1/2" 15" 15" 15" 15-1/2" 16" 16" 16-1/2" 17" 17-1/2" 18" 18" 18-1/2" 19" 19-1/2" 20" 20" 21" 21" 21-1/2" 21-1/2" 22" 22-1/2" 23" 24" 24" 30"

5/32" 1/8" 1/8" 5/32" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 7/16"

COVE CRAB CROW CUBE CURD CURE DANE DARE DARK DARN DELL DIKE DINE DOCK DOLE DONE DOVE DRAW DULL EARN EASE ECHO EDIT ELSE EPIC EDGE EVEN EVER EVIL FACE FACT FADE FARE FEAR FELT FIND FLAT FORK FUEL GALE GOLD

– JOYCE JUNE – KATHY KELLY KIM LAURA LENA LINDA LISA LOIS MANDY MARIE MARTHA MARY NANCY NEVA NORA OLGA OLIVE OPAL PAM PANSY PAULA PENNY RHODE RINA ROSE RUTH SALLY SANDRA SARAN SUSAN TONI TRICIA VERA WANDA WINNIE ZELDA –

1-1/4" 1-1/4" 1-3/8" 1-1/2" 1-1/4" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 2" 1-1/2" 1-5/8" 1-3/4" 2" 1-1/2" 1-3/4" 2" 2-1/8" 1-7/8" 2" 2-1/8" 2-3/8" 2" 2-3/8" 2-1/8" 2-5/8" 2-3/8" 2-5/8" 2-5/8" 2-15/16" 2-5/8" 2-3/4" 3" 2-15/16" 3-1/8" 2-15/16" 3" 3-1/8" 3-3/8" 3-3/8" 3-1/8" 3-3/8"

3-1/2" 3-3/8" 3-3/8" 3-1/2" 3-3/4" 3-3/4" 3-3/4" 4" 4-1/4" 4" 4-1/4" 4-1/2" 4-1/4" 4-1/2" 4-1/2" 4-1/2" 5" 5-1/4" 5-1/4" 5" 5-1/4" 5-1/4" 5-1/2" 5-3/4" 5-1/2" 5-3/4" 6-1/8" 6-1/8" 6-1/8" 6-1/8" 6-1/2" 6-3/4" 7" 6-3/4" 7" 7" 7" 7" 7-1/2" 7-1/2" 8-3/8"

Johnson Rubber Co. Solid Flanged Bearings, Full Molded Type for Strut or Aft Stern Tube (A) Shaft or Sleeve Size

(B) OD (C) Length

(D) Flange Diameter

(E) Flange Thickness

(F) Metal ID (G) Metal Thickness

BRACE BROAD CATCH CLAMP CRANK CLEAR CIVIL DRAFT DREAD DROLL DANCE DRINK DROVE EARTH EASEL ERASE EVENT FABLE FAULT FAITH FARCE FLAKE

2" 2-1/2" 3" 3-1/4" 3-1/2" 3-1/2" 3-3/4" 4" 4-1/4" 4-1/4" 4-3/8" 4-1/2" 4-3/4" 5" 5-1/4" 5-1/2" 5-3/4" 6" 6" 6" 6" 6"

3" 3-3/8" 4-1/4" 4-1/2" 4-3/4" 4-7/8" 5-1/4" 5-1/2" 5-3/4" 5-3/4" 6" 6" 6-1/4" 6-3/4" 6-7/8" 7-1/4" 7-1/4" 7-3/4" 7-3/4" 8-1/2" 8-1/2" 8-3/4"

8" 10" 12" 13" 12-1/2" 14" 15" 16" 17" 17" 22" 18" 19" 20" 21" 22" 23" 15" 24" 20" 24" 20"

5" 5-1/2" 6-3/4" 7" 6-3/4" 7-3/8" 7-3/4" 8" 8-1/4" 8-1/4" 8-7/8" 8-7/8" 9-1/8" 9-5/8" 9-7/8" 10-1/4" 10-1/4" 12-1/4" 11" 11-5/8" 11-5/8" 11-5/8"

3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 5/8" 5/8" 5/8"

2-5/8" 3-1/8" 3-3/4" 4" 4-1/4" 4-1/4" 4-5/8" 4-7/8" 5-1/8" 5" 5-3/8" 5-3/8" 5-5/8" 6" 6-1/8" 6-1/2" 6-1/2" 7" 7" 7" 7" 7"

3/16" 1/8" 1/4" 1/4" 1/4" 5/16" 5/16" 5/16" 5/16" 3/8" 5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/4" 3/4" 7/8"

FERRY FENCE FLARE FLEET FLUTE FLOOR FETCH FRANK FROZE FORCE FANCY FLANK

6" 6-1/4" 6-1/2" 6-1/2" 6-5/8" 6-5/8" 6-5/8" 6-5/8" 6-3/4" 6-3/4" 6-3/4" 6-3/4"

8-3/4" 8" 8-3/8" 8-3/8" 8-1/2" 8-1/2" 8-5/8" 8-5/8" 8-3/4" 8-3/4" 8-3/4" 8-7/8"

24" 22-1/2" 23-1/2" 30" 15" 24" 15" 24" 24" 24" 24-1/2" 15"

11-5/8" 10-5/8" 11" 11" 13-1/2" 11-1/4" 13-1/2" 11-1/4" 11-1/4" 11-1/4" 11-3/8" 13-3/4"

5/8" 9/16" 9/16" 5/8" 5/8" 9/16" 5/8" 9/16" 5/8" 9/16" 9/16" 5/8"

7" 7-1/4" 7-1/2" 7-1/2" 7-5/8" 7-5/8" 7-5/8" 7-7/8" 7-7/8" 7-7/8" 7-7/8" 7-7/8"

7/8" 3/8" 7/16" 7/16" 7/16" 7/16" 1/2" 3/8" 7/16" 7/16" 7/16" 1/2"

FLASH FOUND GAVEL GLAND GLASS GLORY GLOBE GIPSY HARDY HEART HEDGE HITCH HOIST HOVER INFRA IDEAL IDIOT INNER INLET IRISH INSET INSUL IVORY JEWEL JETTY

6-3/4" 6-7/8" 7" 7" 7-1/4" 7-1/2" 7-1/2" 7-3/4" 8" 8" 8" 8-1/4" 8-1/2" 8-3/4" 9" 9" 9" 9-1/8" 9-1/4" 9-1/8" 9-1/2" 9-1/2" 9-3/4" 10" 10-1/4"

8-7/8" 8-7/8" 9" 9-1/8" 9-1/4" 9-5/8" 9-5/8" 9-7/8" 10-1/4" 10-1/4" 10-1/2" 10-1/2" 10-3/4" 11" 11-1/4" 11-1/2" 12" 11-1/2" 11-1/2" 11-1/2" 11-3/4" 11-7/8" 12-1/8" 12-3/8" 12-5/8"

24-1/2" 24-1/2" 25-1/2" 25-1/2" 26-1/2" 17-1/2" 27-1/2" 28-1/2" 20" 29-1/2" 29-1/2" 30-1/2" 31-1/2" 32-1/2" 33-1/2" 33-3/8" 21-3/8" 34-1/2 22-1/2" 34-1/2" 35-1/2" 20-3/4" 36-1/2" 37-1/2" 38-1/2"

11-3/8" 11-3/8" 11-5/8" 11-5/8" 11-7/8" 14-1/2" 12-3/4" 12-1/2" 14-7/8" 13-1/4" 13-1/4" 13-1/2" 13-3/4" 14" 14-1/4" 15" 17-5/8" 16-3/8" 16" 14-5/8" 14-7/8" 14-3/4" 15-1/4" 15-1/2" 15-7/8"

9/16" 9/16" 9/16" 9/16" 9/16" 1" 9/16" 9/16" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" 3/4" 1" 5/8" 3/4" 11/16" 3/4" 1" 3/4" 3/4" 3/4"

7-7/8" 7-7/8" 8-1/8" 8-1/8" 8-3/8" 8-3/4" 8-3/4" 8-7/8 9-1/4" 9-1/4" 9-1/2" 9-1/2" 9-3/4" 10" 10-1/4" 10-1/4" 10-1/4" 10-3/8" 10-1/2" 10-1/2" 10-3/4" 10-3/4" 11" 11-1/4" 11-1/2"

1/2" 1/2" 7/16" 1/2" 7/16" 7/16" 7/16" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 7/8" 9/16" 1/2" 1/2" 1/2" 9/16" 9/16" 9/16" 9/16"

Special Instructions

DMI #427561

DMI #427585 DMI #427600 Split on centerline DMI #427636 DMI #427650

DMI #427698 DMI #427705 Split 1/16" above & below centerline Split 1/16" above & below centerline Split 1/16" above & below centerline Male pilot 8" x 1/4" Split 1/16" above & below centerline

DMI #427713

Male pilot 8-5/8" x 3/8"

DMI #427749 Split 1/16" above & below centerline Split 1/16" above & below centerline Male pilot 9" x 3/8" Split 1/16" above & below centerline

DMI #427751 DMI #427750

Male pilot 10-3/8" x 3/8" DMI #427763 DMI #427787

Split 1/8" above & below centerline

Male pilot 11-1/2" x 3/8" Male pilot 11-1/2" x 3/8"

Split 1/16" above & below centerline

Shipping Weight 8 lbs. 9 lbs. 17 lbs. 20 lbs. 21 lbs. 34 lbs. 39 lbs. 43 lbs. 47 lbs. 52 lbs. 64 lbs. 54 lbs. 58 lbs. 75 lbs. 77 lbs. 89 lbs. 91 lbs. 75 lbs. 98 lbs. 147 lbs. 179 lbs. 175 lbs. – 99 lbs. 129 lbs. 141 lbs. 100 lbs. 133 lbs. 104 lbs. 130 lbs. 131 lbs. 127 lbs. 135 lbs.

138 lbs. 134 lbs. 137 lbs. 143 lbs. 148 lbs. 129 lbs. 160 lbs. 195 lbs. 145 lbs. 197 lbs. 232 lbs. 212 lbs. 221 lbs. 229 lbs. 246 lbs. 275 lbs. 287 lbs. 284 lbs. 200 lbs. 269 lbs. 274 lbs. 170 lbs. 295 lbs. 332 lbs. 353 lbs.

165

GENERAL ACCESSORIES

Code

Johnson Rubber Co. Solid Flanged Bearings, Full Molded Type for Strut or Aft Stern Tube Code

(A) Shaft or Sleeve Size

(B) OD (C) Length

(D) Flange Diameter

(E) Flange Thickness

(F) Metal ID (G) Metal Thickness

JUMBO JOLLY JUDGE KETCH KNOCK KRAFT KNEEL KNIFE KNOTS LABOR LOGAN LANCE LEASE LAYER LOGIC MILKY MUSIC MINCE MITTY MISTY NIFTY NIECE NOVEL ORTHA OGGLE OPERA PURSE POLAR POINT PRUNE PRICE PUNCH QUAKE QUIET

10-1/2" 10-3/4" 10-3/4" 11" 11" 11-1/4" 11-1/2" 11-1/2" 11-3/4" 12" 12-1/8" 12-1/4" 12-3/8" 12-1/2" 12-5/8" 12-3/4" 12-7/8" 13" 13-1/8" 13-1/4" 13-3/8" 13-1/2" 13-5/8" 13-3/4" 13-7/8" 14" 14-1/8" 14-1/4" 14-3/8" 14-1/2 14-5/8" 14-3/4" 14-7/8" 15"

12-7/8" 13-1/8" 13-1/8" 13-1/2" 13-1/2" 13-3/4" 14-1/8" 14-7/8" 14-3/8" 14-3/4" 14-7/8" 15" 15-1/8" 15-1/4" 15-3/8" 15-1/2" 15-5/8" 15-7/8" 16" 16-1/8" 16-1/4" 16-3/8" 16-1/2" 16-5/8" 16-3/4" 16-7/8" 17" 17-1/8" 17-1/4" 17-1/2" 17-5/8" 17-3/4" 17-7/8" 18"

16-1/8" 18-1/4" 16-3/8" 18-5/8" 17-1/4" 17-1/2" 17-7/8" 20-1/4" 18-1/8" 18-1/2" 18-5/8" 18-3/4" 18-7/8" 19" 19-1/8" 19-1/4" 19-3/8" 19-5/8" 19-3/4" 19-7/8" 20" 20-1/8" 20-1/4" 20-3/8" 20-1/2" 20-5/8" 20-3/4" 20-7/8" 21" 21-1/4" 21-3/8" 21-1/2" 21-5/8" 21-3/4"

3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8"

11-3/4" 12" 12" 12-3/8" 12-3/8" 12-5/8" 12-7/8" 12-7/8" 13-1/8" 13-1/2" 13-5/8" 13-3/4" 13-7/8" 14" 14-1/8" 14-1/4" 14-3/8" 14-1/2" 14-5/8" 14-3/4" 14-7/8" 15" 15-1/8" 15-1/4" 15-3/8" 15-1/2" 15-5/8" 15-3/4" 15-7/8" 16" 16-1/8" 16-1/4" 16-3/8" 16-1/2"

39-1/2" 25" 40-1/2" 27-1/2" 41-1/2" 42-1/2" 43-1/2" 50-3/4" 44-1/2" 45-1/2" 46" 46-1/2" 47" 47-1/2" 48" 48-1/2" 49" 50" 50-1/2" 51" 51-1/2" 52" 52-1/2" 53" 53-1/2" 54" 54-1/2" 55" 55-1/2" 56" 56-1/2" 57" 57-1/2" 58"

• Duramax flanged type water lubricated bearings are centrifugally cast naval brass with an integral flange for bolting to stern tube or strut housing to retain bearing and prevent rotation in housing. • Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. • Flanges are furnished not drilled. • Meets MIL-B-17901B military specification. (Ships Class II).

GENERAL ACCESSORIES

166

9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 5/8" 1" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 3/4" 3/4" 3/4" 3/4" 3/4"

Special Instructions

Male pilot 13-1/8" x 3/8" Male pilot 13-1/2" x 3/8"

Flange Bearings Now In Stock. Call Your Sales Rep for Details

Shipping Weight 369 lbs. 247 lbs. 384 lbs. 300 lbs. 424 lbs. 431 lbs. 490 lbs. 871 lbs. 497 lbs. 524 lbs. – 540 lbs. – 556 lbs. 545 lbs. – – – – – 716 lbs. 718 lbs. – – – – – – 842 lbs. – – – – –

Marpac MerCruiser Aluminum Anode Kits • • • • • • • • • • •

Anodes feature patent pending “Wear Indicator” which tell the boater when it’s time to change. Aluminum/Indium alloy is more active so it gives better protection. Aluminum anodes are essential for Mercury sterndrives. Zinc will not provide the correct protection. Aluminum anodes are recommended for both salt and freshwater on Mercury sterndrives. Aluminum anodes last up to 50% longer than zinc anodes. Aluminum anodes “self-clean” in freshwater. Zinc anodes form a coating that stops them from working within a few months. Aluminum anodes are environmentally friendly. Aluminum anodes come with the required hardware for mounting. Attractively packaged with clear information to aid with selection and installation - reducing the need for trained store staff.

Marpac Alpha One Generation I Kit

Marpac Alpha One Generation II Kit

7-2850 (10108A-D)

7-2852 (10059A-D)

Marpac Bravo I Kit

Marpac Bravo II and III Kit (Up to 2003)

7-2854 (10060A-D)

7-2856 (10061A-D)

Marpac Bravo II Kit (2004 and Up)

Marpac Aluminum Trim Tab Anode 7-2865 (00044A-D)

167

GENERAL ACCESSORIES

7-2860 (10165A-D)

Anodes

Camp Company Shaft Anodes

Camp Company Donut Shaft Anodes

338548 338550 338562 338574 338575 338586 338598 338599 338613 338625 338637 338649 338651 338663 269313 338687 338699 338702

338308 338310 338322 368334 338346 338358 338360 338363 269351 269363 269375 269399 269426 269438

(X-0) (X-1) (X-2) (X-3) (X-3A) (X-4) (X-5) (X-5A) (X-6) (X-7) (X-8) (X-9) (X-10) (X-11) (X-12) (X-13) (X-15) (X-17)

1/2” 3/4” 7/8” 1” 1” - Heavy Duty 1-1/8” 1-1/4” 1-1/4” - Heavy Duty 1-3/8” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3” 3-1/2” 4”

Engine Anodes with Bronze Plugs 269832 269844 269959 269960 269961 269856 269868 269882 269831 269956 270018 270019

(E0) 1/4” Plug Dia. 3/8” Length 1-3/4” (E1) 3/8” Plug Dia. 1/2” Length 2” (E1D) 3/8” Plug Dia. 1/2” Length 1-3/4” (E1E) 3/8” Plug Dia. 1/2” Length 1-1/2” (E1F) 3/8” Plug Dia. 1/2” Length 1-1/4” (E2) 1/2” Plug Dia. 5/8” Length 2” (E3) 3/4” Plug Dia. 3/4” Length 2” (E4) 3/4” Plug Dia. 3/4” Length 3-3/8” (CME-00) 1/8” x 2” Pencil Zinc Complete (CMEZ00) 1/4” Pencil Zinc Only

(C-1) (C-2) (C-3) (C-4) (C-5) (C-6) (C-7) (C-8) (C-9) (C-10) (C-11) (C-13) (C-14) (C-15)

Camp Company Rudder Anodes 269135 338461 338473 338485 338497 338500

(R1) (R2) (R3) (R4) (R5) (R7)

338271 338283 269046 269047

(A-24) Dim. 4-3/4” L x 2” W x 3/4” T (A-25) Dim. 9-1/4” L x 3-3/8” W x 3/4” T (A-30) Dim. 6-1/4” L x 2-3/4” W x 5/8” T (A-40) Dim. 7-1/2” L x 2-3/4” W x 1/2” T

3/4” Zinc Only - For Detroit Diesel 3/4” Zinc Complete - For Detroit Diesel

269907 (E7C) 1” x 5” - Complete Zinc and Plug

Zinc Only

GENERAL ACCESSORIES

168

1-7/8” 2-13/16” 3-3/4” 5” 5-1/8” 6-1/2”

Zinc Plates

Pencil Anode Retaining Plugs

269957 269969 269971 269983 270001 270013

3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 3” 3-1/2” 4”

(CME-Z) For E0 (CME-Z) For E1 (CME-Z) For E2 (CME-Z) For E3 (CME-Z) For E4 (CME-Z) For E5

269046 338283

Zinc Plate Pacemaker Style 1 (No Hole) 338295 (A-90) Dim. 9-1/4” L x 3-3/8” W x 53/64” T

Anodes

Zinc Plates for Hull

Camp Divers Plate

338233 338245 338247 338249 338251 338254

338257 (DP-1) Dim. 11-1/2” L x 5-1/4” W x 5/8” T

(ZP-2) (ZHC-3) (ZHC-5) (ZHC-11) (ZHC-15) (ZHC-17)

Dim. 12” L x 6” W x 1/2” T Dim. 6-1/4” L x 2-3/4” W x 3/4” T Dim. 8” L x 4” W x 3/4” T Dim. 12” L x 3” W x 1-1/2” T Dim. 15” L x 3” W x 1-1/2” T Dim. 12” L x 6” W x 1” T

Camp Tapered Hull Anode 338269 (B-12) Dim. 9” L x 4-1/2” W x 1-1/8” T

Camp Zinc Plate for Hull 338270 (N-1) Dim. 8-5/8” L x 3-3/16” W x 1/2” T

Camp Zinc Bolt On 338268 (B-24) Dim. 14” L x 6-1/4” W x 1-1/4” T

Tear Drop Zincs

Camp Sea Strainer Zinc 338510 (SZ-1) Dim. 3-7/8” L x 1-1/2” W

Camp Grouper Anode • Comes with 10 ft. of galvanized wire rope and connector with instruction sheet. Weight: 6 lbs.

269755 (T-20) Length 3-1/2” 269779 (T-21) Length 5-1/4”

Zinc for Maxi-Prop Propellers 338097 (63M) Shaft Size: 3/4”, 7/8”, 1” and 1-1/8”

269330 (GP-1)

Zinc Tear Drop Anode 323600 (TRC-TD6) Dim. 1-1/4” x 3” x 9”

Zinc Plate Anodes 323838 (TRC-12/M12) Dim. 1-1/4” x 3” x 12” 323840 (TRC-23/M24) Dim. 1-1/4” x 6” x 12”

NEW

• Conforms to the latest modification of MIL-A-18001. • Contains two cast-in galvanized steel mounting straps.

323843 (GA23C) 6” x 12” x 1-1/4”

323840

169

GENERAL ACCESSORIES

Bolt On Zinc Hull Anode

Anodes

PVC Coated Magnesium Anode

PVC Coated Magnesium Launch Anode

323903 (TRC-24-W) Dim. 2” x 9” x 18”

323852 3” x 9” 323864 5” x 10”

Anodes for Yamaha Outboard Keel Cooler Anodes • For size 1/2”, 3/4”, 1” Single Stem and 1-1/4” and 1-1/2” Double Stem 4 tube 1 – 1-1/8” fluted.

338165 (Z-1) • For size 1-1/4” and 1-1/2”, 1” Single Stem and 2-1/2” Double Stem 4 tube 1-1/2 turbo tube.

338120 338106 338118 338093 269295 269296 369297 369298

(688-45371-02) 70 HP (6G5-45251) 115-200 HP (6J9-45371) 150-200 HP (61A-45371) 225-250 HP (6E5-45371-01) 90-200 HP - Base OD 3-5/8” (688-45371) 90-200 HP (6K1-45371-00) Counter Rotation Only (6K1-45371-02) Counter Rotation Only

338167 (Z-2) • For size 2”, 2-1/2”, 3”, 4” Single Stem and 3” and 4” Double Stem.

338106

338169 (Z-3)

269295

Anodes for Volve Sterndrive 269195 269285 269286 269292

(V-18) (852598) (852835) (875821)

Outdrive Ring - 270T-280 Outdrive Bar - 250-270 Outdrive Bar - 290B Duo Prop Zinc

Anodes for Suzuki Outboard 338156 (55125-87D00) 150-200 HP

Anodes for J/E Outboard and OMC Sterndrive 269033 269043 269044 269038 338124 338128 338144

(C173) (C393023) (433580) (984547) (3854130) (3855411-2) (398331)

GENERAL ACCESSORIES

170

OMC Outdrive Zinc J/E O/B Cube - 1” x 1-3/8” J/E O/B Cube OMC Outdrive - Cobra OMC Outdrive OMC Outdrive - Low Profile J/E O/B Cube - 275 HP

269043 269038

Anodes for Mercury Outboard and MerCruiser Sterndrive 268990 269001 269003 268983 269000 269002 269006 269007 269004 269005 269026 269010 269022 269027 269028 269084 269030 268979

(806188) (806190) (817373) (806105) (806189) (815933) (821630) (821631) (818298) (826134) (A76214) (31640) (34127) (46399) (43396) (55989) (43994A) (34762)

MerCruiser Outdrive - Bravo MerCruiser Outdrive - Bravo MerCruiser Outdrive - Bravo MerCruiser Outdrive - Alpha MerCruiser Outdrive - Alpha MerCruiser Outdrive - Alpha MerCruiser - Bravo MerCruiser - Bravo Mariner Outboard Mariner Outboard - 60-225 HP Mercury Plate Short Mercury Tab Long Mercury Tab Racing Mercury Tab Mer. Waffle Plate - 75-115 HP MerCruiser Nut - 1-1/8” L MerCruiser Outdrive - Alpha 1 Mercury Outdrive Zinc

Deck Plates and Hinges

Marpac Deck Plates

T-H Marine Sure-Seal Deck Plates

• Watertight. • O-Ring seal concealed in the lid.

• Features a fully overlapping lid and a positive O-ring seal insuring a watertight fit. • Watertight - lid overlapping flange. • Total UV and chemical stability. • No visible mounting fasteners. • Requires no tools for opening.

• Pry Out Deck Plate.

7-0627 Black 7-0628 White

Diameter 8” Diameter 8”

• Pry Out Deck Plate.

• Screw Out Deck Plate - Textured Lids.

7-0620 7-0621 7-0623 7-0624

Black White Black White

247735 (DPP-6-2) Polar White 247756 (DPP-6-1) Black 247762 (DPP-8-2) Polar White

Diameter 4” Diameter 4” Diameter 6” Diameter 6”

• Screw Out Deck Plate.

247622 247658 247710 247723

• Screw Out Deck Plate - Smooth Lids.

7-0622 White 7-0625 White

Diameter 6” Diameter 6” Diameter 8”

Diameter 4” Diameter 6”

(DPS-4-1) Black (DPS-6-1) Black (DPS-8-1) Black (DPS-8-2) Polar White

Diameter 4” Diameter 6” Diameter 8” Diameter 8”

7-0624

Perko Fig. 526 Regular Deck Plates

7-0628

T-H Marine Quick Release Deck Plates

• Plain bronze. • Complete with key.

• Cam latch holds secure. • Textured finish. • Polar White.

540179 (526 003 PLB) 3” ID Overall OD 5-3/8” 540181 (526 004 PLB) 4” ID Overall OD 7-1/16” 540206 (526 006 PLB) 6” ID Overall OD 9-3/8” Diameter 6” Diameter 8”

Standard Products Vinyl Trim - Self-Locking • Length 400’.

623643 (75000346) White 623644 (75000348) Black

171

GENERAL ACCESSORIES

641392 (DPCAM-6) 641393 (DPCAM-8)

Miscellaneous Products

Camco Anti-Freeze

Fixed Height Pedestal

• Protect your RV’s potable water system from freeze damage. • Camco anti-freezes inhibit fouling and corrosion while preventing algae growth. • They also help in lubricating pumps and valves throughout the system.

• Height 15”. • 2-3/8”.

512010 (238916LKSM1)

-50° F Freeze Ban Anti-Freeze.

206309 (30767) Gallon 206311 (30768) Drum Premium Ban Frost 2000 Anti-Freeze.

206361 (30627) Gallon

Dr. Shrink Preservation Tape - White • Has a very aggressive adhesive on it that won’t leave an adhesive residue, plus UV inhibitors in the backing for long term usage. • 10 mil.

228002 (DS-713W) Width 3” Length 108’

Star Brite -50° F RV/Marine Anti-Freeze • • • • •

Protects water systems from freeze ups. Use in boats, RV’s, vaction homes and pools. Safe for copper, brass and all types of plastic. Non-toxic propylene glycol formula. Pink Color.

452209 (31400) Gallon 452212 (314G55) Drum

GENERAL ACCESSORIES

172

Miscellaneous Products

Marpac Propeller Wrench

Marpac Motor Flushers

• 6 point socket style made of high strength indestructible nylon.

• Fits most engines with side water inlets Installs easily. • No tools needed. • Flush away sand, silt, salt, & alkali to prevent clogging and corrosion to extend your engine life.

7-1899

7-0574 7-0574S Display Box of 24 Motor Flushers • Universal round cup motor flusher. • Flush contaminates from your lower unit cooling systems. • Each quickly removes salt and mineral build-up with a simple flush on all lower units with side water inlets. • Install in seconds using just a garden hose.

7-0576 7-0576S Display Box of 24 Motor Flushers

Marpac Black Nylon Inside Eye End Tubes 7-0325 3/4” 7-0327 7/8”

7-0576

Marpac Black Nylon Top Caps with Set Screw

7-0574

7-0331 Tube 3/4” 7-0329 Tube 7/8”

Jessup Safety Track 3200 Coarse • Long life, durable, and resistant to heavy traffic, water, and grease. • Provides a consistent coefficient of friction. • Simply position, peel-off the backing paper, and apply to a clean, dry, oil free surface. • Installs over most irregular surfaces. • Black.

Marpac Black Nylon Slides with Set Screw 7-0335 Tube 3/4” 7-0333 Tube 7/8”

Jessup No-Slip Safety Rolls • Helps provide sure footing on any smooth surface. • Sticks to fiberglass, wood, metal, canvas and all painted and varnished surfaces. • Can be painted to match decks.

Black Black Black

173

GENERAL ACCESSORIES

360444 (3510-1) 1” x 60’ 360470 (3510-2) 2” x 60’ 360507 (3510-4) 4” x 60’

461222 (3200-4) 4” x 60’ 461236 (3200-6) 6” x 60’ 461246 (3200-6) 6” x 24”

Anodes

167-170

C Cable Tie

138

Cable Wrap

139

Engine Paint

Engine Stor

Enviro-Pads

Epifanes

Epoxy

Epoxy Fillers

Epoxy Resins

Exhaust Hose

127

Aluminum

167

Carpet Cleaner

Magnesium

170

Caulking Cotton

Caulking Gun

Chassis Grease

3-8, 10-12, 17, 27-28

Circuit Breaker

144-145

5-6, 8, 10, 18-19, 27

Cleaners

72-83

Color Restorer

68-69

Hard

3-4, 7, 11-12, 17-18

Coloring Agent

Fabric Guard

Awlgrip

23-27

Contact Adhesive

Face Protection

Cooling System Cleaners

Fairing Compounds

Zinc

168-170

Antifouling Paint Ablative Commercial

B Ball Valves Battery Cable Battery Cleaner Battery Lugs

115, 122 134 83 135

Corrosion Inhibitors Cotter Pins Coveralls

92-93

Fiberglass Repair Kit

Fiberglass Tape

File Boards

163-166

Deck Cleaners

Bearing Grease

Degreaser

Bilge Cleaners

Dehumidifier

Denatured Alcohol

Doodlebug

Boat Wash

72-73

Boat Waxes

65-67

Brake Cleaner

Bronze Wool

E Ear Plugs Elbow Electrical

153-157

Fiberglass Cloth

Bearing

Boat Stand

Fasteners, Stainless Steel

43-44

86, 88

72-73

Deck Brushes

Boat Soap

Fender Cleaner

146-147

124-126

Eyewear

33, 87

158

Battery Switch

Bilge Hose

Extension Poles

55 116-118, 123 132-152

ADHESIVES /SEALANTS RESIN SYSTEMS

Alcohol

136-138

TAPES

46-48

Butt Connectors

Electronic Cleaners

SAFETY

Adhesives

149

136-138

ABRASIVES

Adhesive Cleaner

Bus Bars

Terminals

Fillers

43-44

Flange, Rigging

139

Flapper Valves

127

Flax Packing

162

Fuel Conditioners

95-96

Fuel Filters

104-108

Fuel Hose

124, 128

Fuel Line Assemblies Fuel Stabilizer

CLEANING PRODUCTS

95-96

33, 88

140

BRUSHES & SCRUBS

Additives

Bucket

Tape

CHEMICALS

32-32, 64, 86, 88

LUBRICATION

Acetone

Brushes

133-134

FUEL & PLUMBING

56-63

Cable

ELECTRICAL

Abrasives

33, 87

120 95

174

GENERAL ACCESSORIES

Brush Handle

PAINTING

Index

PAINTING

Index Fuel/Water Separators

RESIN SYSTEMS ADHESIVES /SEALANTS

Funnel Fuse Block Systems

1104-108 100 148-149

Hydraulic Fluid

Instant Galvanize

TAPES SAFETY ABRASIVES

Intake Strainers

Gas Additives

Interlux Paint

Gasket Silicone

Gear Lubes

Gel Coat

Git Rot

Glass Cleaners

Glazier Tool

Glazing Putty

44 34, 64

CLEANING PRODUCTS

BRUSHES & SCRUBS CHEMICALS LUBRICATION FUEL & PLUMBING

154-155

ELECTRICAL

56-57

Hose

124-129

Hose Barbs

118, 123

GENERAL ACCESSORIES

Hose Clamps

130

Hose Fittings

118, 123

Paint Preperation System (PPS) 31

Paint Sprayer Kit

Paint Strainer

49-51

Paint Trays

Metal Cleaners

Penetrants

92-93

Mildew Removers

Pettit Paint

17-22

Mineral Spirits

Pipe Fittings

116-118

Mixing Tubs

Pipe Nipples

117

Mop

Pipe to Hose Adapters

118

Motor Cleaners

Pitot Tubing

126

Masking Paper

135

31-32

37-38

136, 138

Paint Scrapers

MarPro Resin

Hearing Protector

Engine Spray

Paint Rollers

7-9, 30

Hookit Disc Products

170

MarPro Paint

Hard Hat

Antifouling - Outboard/Outdrive

Paint Brushes

100

3-4, 7, 11-12, 17-18

Marine Tex

Hex Nuts

92-93, 98-99

Antifouling - Hard

Masking

Hand Cleaner

3-30 5-6, 8, 10, 18-19, 27

Goggles

Paint

M.E.K. Solvent Magnesium Anodes

Hand Block

Antifouling - Ablative

101-102

8, 12, 19

Gluvit

Heat Shrink Tubing

10-16

154, 156

M.E.K.P. Solvent

Heat Shrink Terminals

Pail

Lock Washers

Grinding Wheels

110-113

154-155

Glue

Grease Gun

Lock Nuts Lubricants

Oil Changers

L Lacquer Thinner

O Orbital Sanders

Galvanize

Gloves

175

Hull Cleaners

Masking Tape

Motor Mate

100

Motor Paint

Plastic Cleaners

Plastic Pails

Polish, Boat

65-66

Polishing Pads

81-85

129

Power Purge

N Never Dull Nozzles Nuts, Stainless Steel

154-155

Primers

91 8-9, 14, 22, 26-28

46-47

Putty

Seam Compounds

Putty Knives

Silicone Seal

PVC Tubing

124-126

Solvents

R Rags Rain View Raw Water Strainers

34, 89 76 110-111

Remover, Stain

73, 78

Resin

37-39

Resin Additive

39-40

Resin Rollers Respirators

40 53-54

Rigging Conduit

139

Rigging Flange

139

Rigging Hose

139

Ring Terminals Rocker Switches

Soap, Boat

136-138 151

Spade Terminals Split Conduit Spreader Stain Removers

72-73 9, 15, 22, 90 136-137 139 39 73, 78

Sanding Discs

56-60

Sanding Pads

56-58

Scoop Strainers Scrapers

112 35

W Washdown Hose

129

Washer, Stainless Steel

154, 156

Water Hose

124-126

Starting Fluid

Stove Alcohol

58-60 90

Wax, Boat Window Scraper Wire

65-67 35 133-134

Strainers

110-111

Wire Brushes

Switch Panels

142-143

Woven Roving

Swobbit

88-89

Tape

Teflon Tape

Thinners Thru Hull Connectors Tie, Cable Trim & Tilt Fluid

119

Z Zinc Anodes

167-170

49-50, 52, 140

Teak Care Products Terminal Blocks

Y Y-Valve

T 118

Sanders

Vinyl Maintenance Products

119

110-111

Tail Pipe

Vented Loops

Water Strainers

Salt Terminator

124, 126

134

Rollers

Vent Hose

Starter Cable

16, 21, 29

104-108

Tack Cloth

Rust Remover

Varnishes

Water Separators

33 70-71

115, 118-119, 122

Roller Frames Rubbing Compounds

Valves

Stands, Boat

Stickit Disc Products

ADHESIVES /SEALANTS RESIN SYSTEMS

Sealants

TAPES

101-102

SAFETY

115

ABRASIVES

Seacocks

CLEANING PRODUCTS

100

BRUSHES & SCRUBS

Utility Knives

CHEMICALS

Oil Changer

Scrub Brushes

86, 89

LUBRICATION

Gearlube

153

FUEL & PLUMBING

Scrub

Pumps Epoxy

Screws

149

ELECTRICAL

9, 15, 22, 90 114-115 138 99

176

GENERAL ACCESSORIES

Protective Tapes

PAINTING

Index