Dehumidifiers - Danvex ADSORPTION-TYPE
AD-200
AD-550
AD-800
Working principle The fan inhausts the humid ambient air which goes via rotating rotor filled with the high-effective silica gel on fiberglass carrier. The rotor design provides for two parallel air flows and maximum contact with absorbent. The humid air flow goes via dry part of the rotor on which the moisture is absorbed and the dehumidified air returns to the premises. The regenerating air flow is intended to recover the absorbed moisture from the rotor for that the air intake is made from outside the premises and then the air is heated before to go via rotor. Passing the small rotor segment it absorbs the moisture and removes it back outside the premises. In course of operation the rotor rotates continuously that provides the continuous automated process. Adsorption dehumidifiers are normally used for different industrial manufacturing process or for dehumidification of rooms and storage areas where an environment of TECHNICAL DATA Maximum dehumidification , L / 24 hours Air flow rate, q.m. / hour Operating range Temperature, C Relative Humidity, % Power supply Power consumption , W Height, mm Length, mm Width, mm Weight , kg
AD-3000
low relative humidity is required by humidity sensitive products or materials such as drugs, food, candy and so on. The well approved method of drying air through adsorption offers a great flexibility in solving humidity problems. The humidity of the air can be controlled to dew points well below the limits of a condensation type of dehumidifier. Also air with a relative humidity of 100% can be dehumidified without harming the rotor material. The advantages in practice • Deep drying at the specified air volume • Effective and washable silica gel rotor • Separate air flows for process air and regeneration air • Effective rotor gaskets ensure high effect level • Sufficient pressure for connection of additional ducts • Supports connection of round standard ducts • Filter cartridges for process air inlet • Easy access for service and maintenance • A complete unit including integrated electrical system
AD-200 14,4 200 -20 C to +40C
AD-550 72 600 -20 C to +40 C
230 V / 50 Hz 1100 678 440 300 30 kg
230 V / 50 Hz 6000 510 480 510 50 kg
Fábrica: Travessa da Zona Industrial - 1, nº 95 Rossio, 3730-601 Vila Cova do Perrinho, Vale de Cambra. Tel. (+351) 256 472 888 Fax: (+351) 256 425 794 Email: comercial@chatron.pt Url: www.chatron.pt
AD-1500
AD-800 AD-1500 106 240 800 1500 -20 C to +40 C -20 C to +40 C 2% - 100 % 380/3~/50 V/Hz 230 V / 50 Hz 6000 14 700 1220 1080 640 620 830 845 110 kg 160 kg
AD-3000 456 3000 -20 C to +40 C 380/3~/50 V/Hz 30 000 1300 1312 856 250 kg