Cross Flow Cooling Tower
Significant note about Cooling Tower Water Management Once you have decided to use the water treatment system of the cooling tower , it is very important to remember not ignore the maintenance required . Water carries bacterial growth therein if it flows through the tap or is flowing through a cooling tower . If this water is not treated as soon as possible , may rust and corrode and form deposits within the water treatment equipment . This reason makes the water treatment system of the cooling tower very important. Timber cooling tower
Problems do not keep the tower cool If you do not keep good maintenance of your water system cooling tower, you will find that many different problems come up . These problems can include scaling , corrosion and biofouling . Problems with scaling The scale is formed when the wet solids clog the pipes. This scale comprises hot and cold water containing a high mineral content . These deposits will continue to build over time. If these scale deposits begin to form on a heat exchange surface , which eventually obstruct passages and slowdowns. The cooling tower can also be affected by scale deposits . If deposits block the flow of the basin or fill cooling tower , problems arise . counter flow cooling tower
Opt for the use of a water treatment system of the cooling tower help stop problems lime deposits. It is a budget friendly way to address the problems you have, but also to reduce the maintenance and cost of maintenance on the system itself cooling tower . Most money spent each year is in removing limescale from the inside. Corrosion within When the metal starts to dissolve , you have what is known as corrosion. Oxidation effects metal break significantly. The breakdown of the system will degrade at a faster rate than
normal. The important point is that when the metal begins to break , the resistance of the metal and the metal thickness is reduced. The metal structure can no longer cope with the pressure that has been designed and pits and craters can form on the metal. A cooling tower system will help stop corrosion from happening. The best treatment for corrosion is ozone treatment . There are other methods that work just as good. Problems with biological contamination Biofouling problems occur when the water has not been used and left for extended periods of time. When water is left unattended, it has the potential to form bacteria, fungi, algae and protozoa. Microorganisms eventually reach large proportions in water and cause a biofilm to form on the water surface. This movie is very difficult to get rid of. This is what is known as biofouling. Biological pollution problems are commonly known as the most serious problem that can be found by using the cooling tower system . The problems that can occur with biological contamination is low heat transfer, the filling may not work properly , the water flow can be restricted or blocked , or corrosion can occur from microorganisms . It can also lead to health problems for humans who use it. The use of a water system cooling tower helps to get rid of this particular problem . When you buy a good system, remove bacteria , viruses , fungi and other organisms that should not be in the water. The cooling system will help the inlay is a problem that affects the biological water to not occur . When these unpleasant things are eliminated from the water, which undoubtedly improve the water quality and the water flow through the tower.
Crystal Cooling Towers manufacturer, exporters and suppliers of Cooling Tower and frp Cooling Tower.