Comparing EDM 760 and EDM 790 System EDM 760 and EDM 790 are near identical EDM’s. The major
difference being that EDM 790 is equipped with a full colour TFT screen. Both Engine Data Monitors are manufactured by J.P.I - World leader in aircraft EDM systems. EDM 760 and EDM 790 provide the pilots with real time information on the status and health of the aircraft engine. They constantly monitor the health of the aircraft engine and any red-line events are instantly brought to the pilot’s attention via audiovisual alarms. This leaves the pilots to concentrate on the flight experience rather than constantly monitoring Digital Gauges.
EDM 760
EDM 790
From $3,675.00 to $8,1000.00
From $7,055.00 to $8,255.00
✓
✓
29, 4 times/second
29, 4 times/second
Thermocouple type Accuracy Accuracy certified by
Linearized 1.1 percent or 2 F° FAA and thus TSO’d (Technical Standard Order)
Linearized 1.1 percent or 2 F° FAA and thus TSO’d (Technical Standard Order)
Technology
Microprocessor
Microprocessor
Programming interface
2 buttons on faceplate
2 buttons on faceplate
✓
✓
29 Alarms, including Shock Cooling, EGT Differential, fuel flow and Alternator Voltage.
29 Alarms, including Shock Cooling, EGT Differential, Aircraft Fuel Flow Indicator and Alternator Voltage.
Purchase price Latest microprocessor technology Number of critical parameters checked and, number of times checked
Computer Assisted Diagnostics Number of alarms Variable scaling bar graphs Lean Finder
USB Port
✓ Patented LeanFind Mode automatically identifies the first and last cylinder to peak and while patented PeakFind system has quick responding probes to automatically
✓ Patented LeanFind Mode automatically identifies the first and last cylinder to peak and while patented PeakFind system has quick responding probes to
Data Recording
capture EGT or TIT peak value.
Fuel-flow Data Port Auto-scanning Probes
25 hours
Accessories provided
FAA approved Fuelflow monitoring system.
Software
29 channels
Screen Certification
Warranty
Quick response probes
automatically capture EGT or TIT peak value.
✓ 25 Hours FAA approved Fuelflow monitoring system. 29 channels Quick response probes
All required harnesses 20 ft All required harnesses 20 ft EZPlot-1 program for plotting and EZPlot-1 program for downloading data plotting and downloading data Single colour (Orange) TFT Screen Full colour TFT screen TSO’d for Quality and Reliability with FAA, STC approved TSO’d for Quality Fuel Flow. and Reliability with FAA, STC approved Fuel Flow. 3 years 3 years
EDM 760 & 790 features at a glance:
LeanFind (tm) software performs LOP and ROP automatically finds the first and last cylinder to peak. Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate. Voltage, for alternator failure, monitored for over and under voltage with alarms. Pilot Programmable Hi & Lo alarm limits. All programming from front panel. All EDM’S TSO’d for quality with a 3 yr. Warranty on the Electronics. Quick response probes, fastest accurate readings, pre-made harness and hardware. Data Memory, reading once every 2 to 255 seconds. EZPlot-1 program for plotting and downloading data. USB download port built in with memory stick. Full colour TFT screen 4 inches Diagonal (EDM 790). Visit here for more information : https://www.jpinstruments.com/shop/edm-760/ OR https://www.jpinstruments.com/shop/edm-790/ JPI Sales: 1-800-345-4574 714-557-3805 FAX: 714-557-9840 sales@jpinstruments.com JPI Technical Support: 1-800-345-4574 714-557-3805 support@jpinstruments.com J.P. Instruments Inc: 3185-B Airway Ave Costa Mesa, CA 92626