Comparing EDM 760 and EDM 790 System EDM 760 and EDM 790 are near identical EDM’s. The major difference
being that EDM 790 is equipped with a full colour TFT screen. Both Engine Data Monitors are manufactured by J.P.I - World leader in aircraft EDM systems. EDM 760 and EDM 790 provide the pilots with real time information on the status and health of the aircraft engine. They constantly monitor the health of the aircraft engine and any redline events are instantly brought to the pilot’s attention via audiovisual alarms. This leaves the
pilots to concentrate on the flight experience rather than constantly monitoring gauges. EDM 760
EDM 790
From $3,675.00 to $8,1000.00
From $7,055.00 to $8,255.00
✓
✓
29, 4 times/second
29, 4 times/second
Thermocouple type Accuracy Accuracy certified by
Linearized 1.1 percent or 2 F° FAA and thus TSO’d (Technical Standard Order)
Linearized 1.1 percent or 2 F° FAA and thus TSO’d (Technical Standard Order)
Technology
Microprocessor
Microprocessor
Programming interface
2 buttons on faceplate
2 buttons on faceplate
✓
✓
29 Alarms, including Shock Cooling, EGT Differential, Fuel flow and Alternator Voltage.
29 Alarms, including Shock Cooling, EGT Differential, Fuel flow and Alternator Voltage.
✓
✓
Patented LeanFind Mode automatically identifies the first and last cylinder to peak and while patented PeakFind
Patented LeanFind Mode automatically identifies the first and last cylinder to peak and while patented PeakFind
Purchase price Latest microprocessor technology Number of critical parameters checked and, number of times checked
Computer Assisted Diagnostics Number of alarms Variable scaling bar graphs Lean Finder
USB Port
system has quick responding probes to automatically capture EGT or TIT peak value.
system has quick responding probes to automatically capture EGT or TIT Probe peak value.
Data Port
✓
25 hours
25 Hours
FAA approved Fuelflow monitoring system.
FAA approved Fuelflow monitoring system.
29 channels
29 channels
Screen
Quick response probes
Quick response probes
Certification
All required All required harnesses 20 ft harnesses 20 ft
Data Recording Fuel-flow Auto-scanning Probes Accessories provided Software
Warranty
EZPlot-1 program for EZPlot-1 program for plotting and plotting and downloading data downloading data Single colour Full colour TFT (Orange) TFT Screen screen TSO’d for Quality and Reliability with TSO’d for Quality FAA, STC approved and Reliability with Fuel Flow. FAA, STC approved Fuel Flow. 3 years 3 years
EDM 760 & 790 features at a glance:
LeanFind (tm) software performs LOP and ROP automatically finds the first and last cylinder to peak.
Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate. Voltage, for alternator failure, monitored for over and under voltage with alarms. Pilot Programmable Hi & Lo alarm limits. All programming from front panel. All EDM’s TSO’d for quality with a 3 yr. Warranty on the Electronics. Quick response probes, fastest accurate readings, pre-made harness and hardware. Data Memory, reading once every 2 to 255 seconds. EZPlot-1 program for plotting and downloading data. USB download port built in with memory stick. Full colour TFT screen 4 inches Diagonal (EDM 790). Visit here for more information : https://www.jpinstruments.com/shop/edm-760/ OR https://www.jpinstruments.com/shop/edm-790/ JPI Sales: 1-800-345-4574 714-557-3805 FAX: 714-557-9840 sales@jpinstruments.com
JPI Technical Support: 1-800-345-4574 714-557-3805 support@jpinstruments.com
J.P. Instruments Inc: 3185-B Airway Ave Costa Mesa, CA 92626