A very easy to follow instruction
By JR Decal http://www.jrdecal.com
You will need few things to start. Pencil to mark the place Dry cloth to clean the surface Masking tape to stick the wall sticker temporarily (Optional) Scissor (Optional) ID card/Bank Card or a plastic Squeegee
Step 01: ď‚ž Clean the surface with a dry cloth. Then mark the desired place
ď‚ž Place
the wall sticker on a plain table or hard surface then smooth out the backing paper using ID card/bank card or plastic squeegee, so that no bubble left.
ď‚ž Stick
the wall sticker on the desired place using masking tape
Carefully remove the backing paper at the flat angel to ensure that the decal remains adhere to the application tape
Cut half of the backing paper . Then affix the decal to the desired location with the adhesive side facing the surface
Smooth out the application tape using plastic squeegee or card, make sure the sticker is properly applied to the surface
repeat step 03 to 06 for the rest of the sticker.
Carefully peel off the application tape from the upper right corner at the flat angle. Peel completely. If any part is not affixed to the wall properly, press them using the squeegee.
Done! See your wall now.
You can find this design on http://www.jrdecal.com Contact us at support@jrdecal.com