For more information and to shop all products, visit: WWW.DEWALTSHELVING.COM • WWW.DEWALTWELDING.COM INDUSTRIAL STORAGE RACK PROGRAM METAL FABRICATION PROGRAM
INDUSTRIAL STORAGE RACK PROGRAM METAL FABRICATION PROGRAMWWW.DWWW.DEWALTSHELVING.COMEWALTWELDING.COM OFFICIALLY LICENSED BY
302622614 TABLE OF CONTENTS 4RACK PROGRAM OVERVIEW INDUSTRIAL RACKS RACK ACCESSORIES SHOP INDEXMETALSEATINGFABRICATION
WWW.DEWALTSHELVING.COM 4 DXSTA04MP 4 PACK LEVELING FEET pg. 17 DXST10000PBK 2 PIECE STEEL PEGBOARD KIT For DXST10000 pg. 14 DXST10000EXT 2-FOOT TALL / 1-SHELF HEIGHT EXTENDER KIT For DXST10000 pg. 16 DXST4500DK DRAWER KIT For DXST4500 pg. 15 DXST4500WTD WORKTOP DRAWER KIT For DXST4500 pg. 15 DXSTA10MPB MAGNETIC PARTS BUCKET pg. 18 DXST4500PBK 2 PIECE STEEL PEGBOARD KIT For DXST4500 pg. 14 DXSTA2CM 2 PIECE CORD MINDER pg. 18 DXSTA26CLB 2 PIECE pg.CANTILEVER6-INCHBRACKETS16 ACCESSORIES FOR ALL RACKS INDUSTRIAL RACK 6-FOOT. TALL / 4-SHELF pg. 8 DXST4500DXST10000 INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF pg.9 BUILDDXST4500 UP. BUILD OUT.™ THE ULTIMATE WORK STATIONS The DEWALT Storage Rack Program at a glance.OVERVIEWPROGRAMRACK STANDARDSTANDARD CONFIGURATIONCONFIGURATION BASE PRODUCTS & CONFIGURATIONS
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 5 OFFICIALLY LICENSED BY CHOOSE YOUR RACK 6-Foot Tall / 4-Foot Tall1 CHOOSE YOUR DRAWER (available only for 4-foot configurations) Drawer Kit / Worktop Drawer Kit3 CHOOSE YOUR PEGBOARD �������������������������������������������������������������������������������������������������������������� 6-Foot Tall Rack / 4-Foot Tall Rack2 ADD YOUR ACCESSORIES Storage / Organization / Lighting4 BUILD YOUR CONFIGURATION Standard / Stacked / Workbench5 DXSTA500LM 3 PACK MOTION SENSOR LIGHT KIT pg� 19 DXSTA151PS 15 AMP POWER STATION WITH GFCI AND DETACHABLE WORK LIGHT pg� 19 NEXT STEP: GET STARTED: OVERVIEWPROGRAMRACK STACKEDSTACKED WORKBENCHWORKBENCH CONFIGURATIONCONFIGURATIONCONFIGURATIONCONFIGURATION * DXST10000 workbench configuration requires two complete racks * DXST4500 stacked and workbench configurations require two complete racks DXSTFH030 SWIVEL SHOP STOOL pg� 22 DXSTAH025 ADJUSTABLE SHOP STOOL WITH CASTERS pg� 22 DXSTFB048 GARAGE BENCH pg� 23 COMPLETE YOUR WORK STATION WITH SHOP SEATING: See pages 20-23
6 RACKSINDUSTRIAL DEWALT STORAGE RACKS FEATURE:ALL PROTECTIVE TOP CAPS FLUSH TOP SHELF MOUNT & SHELF LOCKING PINS TWO DIFFERENT TYPES OF LOAD-BEARING STRAPS INDUSTRIAL WIRE GRID & GRID STABILITY CLIPS
The DEWALT line of Industrial Racks was designed and engineered to provide heavy-duty storage for the professional and home user. Each rack features innovative details that aren’t typically found on industrial racks, such as dense wire grids that prevent items from falling through, safety straps with weld nuts for ease of assembly, and top caps that protect both you and your items from possible damage.
ABOUT THE RACKS STRENGTH YOU CAN COUNT ON. HASSLE-FREE ASSEMBLY.
YOUR RACK. BUILT DEWALT TOUGH.
The DXST4500 and DXST10000 feature the highest total load capacity for any storage rack their size. We’re talking about two and five tons of pure DEWALT might. To ensure the shelves stay strong, we’ve added two types of support straps that prevent them from buckling under pressure. No other brand can stack up to that kind of muscle. Both racking systems expand out of their boxes with pre-installed upright bolts, greatly reducing the stress that comes from assembling industrial racks. We’ve even included a hex bit to use with your favorite DEWALT impact driver, so you’ll be in, out, and organized in no time.
STACKING PLATES & POWDER-COATED FINISH PROTECTIVE CAPPED NYLON FEET SAFETY WALL MOUNT BRACKETUNSURPASSED CAPACITY INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™
WWW.DEWALTSHELVING.COM 8 CONFIGURATIONWORKBENCH DXST10000 56829 INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF • 10,000 lb. maximum capacity from 3 industrial wire grid shelves and 1 wood composite deck that can each support 2,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Each of the 4 shelves feature a total of 8 support straps between the crossbeams to prevent them from twisting or spreading under heavy loads • 4 clips on each wire rack lock the grid into place on the crossbeams keeping it secure and preventing warping • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping • Shelf heights are fully customizable allowing each to be individually adjusted in 3-inch increments • Easy to assemble design comes with pre-installed horizontal and diagonal support beams on two uprights Height72" (182.8 cm) Width77" (195 cm) Depth24" (61 cm)RACKSINDUSTRIAL * Configurations require two complete racks SHELF CAPACITY 2500 LB. PROTECTSCORROSIONAGAINSTCAPPEDFEETFEETADJUSTABLESHELVES INCREMENTS7.623"CM RACK DEPTH 60.9624"CM
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 9 OFFICIALLY LICENSED BY STACKED CONFIGURATIONWORKBENCHCONFIGURATION DXST4500 56831 INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF Height47" (119.4 cm) Width49.5" (125.7 cm) Depth18" (45.7 cm) • 4,500 lb. maximum capacity from the 3 black laminate wood composite decks that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Each of the 3 shelves features a total of 5 support straps to prevent twisting or spreading under heavy loads • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping • Shelves are adjustable in 2.35-inch increments • Join multiple racks together to create a complete storage or workspace solution • Easy to assemble design comes with pre-installed horizontal and diagonal support beams on two uprights RACKSINDUSTRIAL * Configurations require two complete racks SHELF CAPACITY 1500 LB. ADJUSTABLESHELVES INCREMENTS2.35"5.97CM RACK DEPTH 45.7218"CM PROTECTSCORROSIONAGAINSTCAPPEDFEETFEET
WWW.DEWALTSHELVING.COM 10 STACKED CONFIGURATIONWORKBENCHCONFIGURATION DXST4500-W 41590 INDUSTRIAL RACK WITH WIRE GRIDS 4-FOOT TALL / 3-SHELF Height47" (119.4 cm) Width49.5" (125.7 cm) Depth18" (45.7 cm) • 4,500 lb. maximum capacity from the 3 wire grid shelves that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Each of the 3 shelves features a total of 5 support straps to prevent twisting or spreading under heavy loads • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping • Shelves are adjustable in 2.35-inch increments • Join multiple racks together to create a complete storage or workspace solution • Easy to assemble design comes with pre-installed horizontal and diagonal support beams on two uprights * Configurations require two complete racks RACKSINDUSTRIAL SHELF CAPACITY 1500 LB. ADJUSTABLESHELVES INCREMENTS2.35"5.97CM RACK DEPTH 45.7218"CM PROTECTSCORROSIONAGAINSTCAPPEDFEETFEET
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 11 OFFICIALLY LICENSED BY STACKEDCONFIGURATIONWORKBENCH CONFIGURATION DXST3000WB 41631 2-SHELF INDUSTRIAL STORAGE RACK WORK STATION • 3,000 lb. maximum capacity from the 1 black laminate wood shelf and 1 wire grid shelf that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Drawer measures 6-inches tall x 42-inches wide x 16.5-inches deep, has smooth, gliding ball-bearing slides and a 120 lb. capacity • Steel pegboard panel mounts between uprights or on its own vertical supports and features 1-inch on center spacing • Kit includes 6 pegboard hangers to let you store power tools, screwdrivers, pliers, air tools, and more • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping 1 (2) Upright Assemblies 2 (1) Wire Decks 3 (1) Laminate Decks 4 (1) Drawer 5 (1) Pegboard 6 (6) Pegboard Tool Organizers INCLUDES: (1) Large Tool Holder (1) Power Tool Holder(1) Screwdriver Holder(3) Single Peg Hooks * Configurations require two complete racks 1 32 4 5 6 RACKSINDUSTRIAL Height56.25" (142.9 cm) Width49.5" (125.7 cm) Depth18" (45.7 cm) SHELF CAPACITY 1500 LB. ADJUSTABLESHELVES INCREMENTS2.35"5.97CM RACK DEPTH 45.7218"CM PROTECTSCORROSIONAGAINSTCAPPEDFEETFEET
12 RACKSINDUSTRIAL STACKEDCONFIGURATIONWORKBENCH CONFIGURATION DXST6000WB 41609 4-SHELF INDUSTRIAL STORAGE RACK WORK STATION • 6,000 lb. maximum capacity from the 2 black laminate wood shelves and 2 wire grid shelves that can each support 1,500 lb. when evenly distributed • Durable, industrial powder-coating on the steel uprights, support straps, crossbeams and brackets resists rust and wear and won’t chip or fade like paint • Drawer measures 6-inches tall x 42-inches wide x 16.5-inches deep, has smooth, gliding ball-bearing slides and a 120 lb. capacity • Steel pegboard panel mounts between uprights or on its own vertical supports and features 1-inch on center spacing • Kit includes 6 pegboard hangers to let you store power tools, screwdrivers, pliers, air tools, and more • Customizable cord minder lets you conveniently store extension cords and have rotating end stops for easy cord removal • Rugged glass fiber-reinforced nylon feet protect flooring from accidental scratches and add traction to prevent the rack from sliding when loading and unloading shelves • Multiple safety features include steel locking pins to ensure that shelves remain secured in place and a wall mounting anchor bracket to secure the rack against accidental tipping 1 (4) Upright Assemblies 2 (2) Wire Decks 3 (2) Laminate Decks 4 (1) Drawer 5 (1) Pegboard 6 (6) Pegboard Tool Organizers 7 (1) Cord Minder Set INCLUDES: (1) Large Tool Holder (1) Power Tool Holder(1) Screwdriver Holder(3) Single Peg Hooks * Tools not included 1 32 4 5 6 7 VERTICAL Height49.5" (125.7 cm) Width94" (238.8 cm) Depth18" (45.7 cm) HORIZONTAL Height47" (119.4 cm) Width148.5" (337.2 cm) Depth18" (45.7 cm) SHELF CAPACITY 1500 LB. WWW.DEWALTSHELVING.COM
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 13 OFFICIALLY LICENSED BY RACKSINDUSTRIAL COMING SOON… INDUSTRIAL RACKS WITH 3 12 1 DXST4500BLK 416584-Foot / 3-Shelf Industrial Rack, Black 2 DXST4500BLK-W 416594-Foot / 3-Shelf (Wire) Industrial Rack, Black 3 DXST10000BLK 416606-Foot / 4-Shelf Industrial Rack, Black SLEEK BLACK POWDER COATING
ACCESSORIESRACK 14 DEWALT ACCESSORIES INCLUDE: MAGNETIC MOUNT BUCKETS & PEGBOARD ACCESSORIES STEEL PEGBOARDS MOUNT DIRECTLY TO UPRIGHTS OR WALL DRAWERS CONVERT YOUR RACK INTO A FUNCTIONAL WORK STATION CORD MINDERS KEEP CORDS TIDY & CONVENIENT VERSATILE
CANTILEVER BRACKETS STORE LONG OBJECTS ON YOUR RACK CANTILEVER RACK CREATES EXTRA STORAGE FOR LONG SUPPLIES MULTI-FUNCTIONAL POWER STATION LIGHTING COMPLETES YOUR SETUP TO ILLUMINATE YOUR SPACE INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™
ABOUT THE ACCESSORIES DEWALT TOUGH ADD-ONS. UPGRADING DONE RIGHT. HASSLE-FREE ASSEMBLY. Designed and engineered to the same exact requirements as the racks they are meant to attach to, these add-ons feature the same durable powder-coated steel construction as the industrial racks. So go ahead and customize your storage rack with the confidence that each piece is DEWALT AccessoriesTOUGH.are meant to take something useful or handy and make it indispensable. From bringing more secure footing on uneven flooring to adding additional storage through more shelves, drawers, pegboards, and lighting, each of these accessories take the basic DEWALT storage rack to new heights of organizational might. An easy to assemble storage rack deserves accessories that are just as easy to attach. These easily installed accessories utilize the same holes on the uprights used to mount the shelves and powerful magnets to attach to the steel rack so you can spend less time on assembly, and more time on projects.
• Included mounting brackets and extensions let you attach a panel to both sides of the rack, stack two on the back, or one side and one back
• Industrial grade powder-coating won’t chip or fade and matches the appearance and texture of the rack’s existing laminate wood composite deck
• Industrial grade powder-coating won’t chip or fade and matches the appearance and texture of the rack’s existing laminate wood composite decking
• Locking pins on the mounting brackets keep them in place
• With no tools required to attach the panels, installation is easy regardless of chosen mounting configuration
2 PIECE STEEL PEGBOARD KIT FOR DXST10000 INDUSTRIAL RACK Height18" (45.72 cm) Width44" (111.76 cm)
• Pegboards are constructed of durable steel that will easily outlast wood and composite boards
• Includes hardware for mounting directly to a finished wall as an additional organization option
WWW.DEWALTSHELVING.COM
• Features standard 1-inch on center spacing with 1/4-inch diameter holes to fit most standard pegboard accessories
• Includes hardware for mounting directly to a finished wall as an additional organization option
ACCESSORIESRACK
TOTOMOUNTSUPRIGHTSMOUNTSUPRIGHTS
• Included mounting brackets and extensions let you attach a panel to both sides of the rack, stack two on the back, or one side and one back
DXST4500PBK 41557
• Pegboards are constructed of durable steel that will easily outlast wood and composite boards
• With no tools required to attach the panels, installation is easy regardless of chosen mounting configuration
• Locking pins on the mounting brackets keep them in place
• Each steel pegboard panel measures 18-inches x 44-inches
DXST10000PBK 41554
16 Height24" (61 cm) Width71" (180.3 cm)
• Features standard 1-inch on center spacing with 1/4-inch diameter holes to fit most standard pegboard accessories
• Each steel pegboard panel measures 24-inches x 71-inches
2 PIECE STEEL PEGBOARD KIT FOR DXST4500 INDUSTRIAL RACK
• The drawer’s durable steel construction has an industrial grade powder-coating finish that won’t chip or fade
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 17 OFFICIALLY LICENSED BY
• Turn your existing 4-foot storage rack into a functional workbench with a shelf-sized storage drawer
WORKTOP DRAWER KIT FOR DXST4500 INDUSTRIAL RACK Height6.21" (15.77 cm) Width42.95" (109.09 cm) Depth16.86" (42.82 cm) DXST4500DK 41559
• Drawer can comfortably support up to 120 lb. of stored tools when distributed evenly across its interior
ACCESSORIESRACK TOMOUNTSUPRIGHTSMOUNTSTOUPRIGHTSDRAWER CAPACITY 120 LB. WORKTOPCAPACITY 1000 LB. LOAD CAPACITY 120 LB.
• Drawer can comfortably support up to 120 lb. of stored tools when distributed evenly across its interior
Height8.27" (21.01 cm) Width44.13" (112.09 cm) Depth19.12" (48.56 cm)
• Smooth gliding ball bearing drawer slides open and closed easily
• Drawer measures 6-inches tall x 42-inches wide x 16.5-inches deep for storage that stretches from upright to upright
• With the capacity to support up to 1,000 lb. on the work surface, the worktop drawer can be used to join two DXST4500 Industrial racks together to create the ultimate workbench
• Smooth gliding ball bearing drawer slides open and closed easily
• Uses the same 2.35-inch adjustment as the shelf crossbeams
DXST4500WTD 41567
• Uses the same 2.35-inch adjustment as the shelf crossbeams to let it sit snugly underneath an existing shelf Comes with front, back, and side panels pre-attached to drawer floor for quick and easy assembly KIT FOR DXST4500 INDUSTRIAL RACK
•
• The drawer’s durable steel construction has an industrial grade powder-coating finish that won’t chip or fade
• Turn your existing 4-foot storage rack into a functional workbench with this worktop drawer that functions as a shelf replacement or an additional shelf/work surface
DRAWER
WWW.DEWALTSHELVING.COM 18 DXSTA26CLB 41599 2 PIECE CANTILEVER6-INCHBRACKETS • Each arm can support 50 lb. for a total storage capacity of 100 lb. when evenly distributed • Made of durable steel with an industrial grade powder-coating finish that won’t chip or fade • The arms on each bracket feature a 2.5-inch flat tab on the end to prevent round stock from rolling off • Locking pins secure brackets to rack uprights and prevents movement when bumped or while loading material • Mounts to the uprights on both DXST4500 4-foot, and DXST10000 6-foot DEWALT storage racks Height5.25" (13.3 cm) Width2.65" (6.7 cm) Depth7.25" (18.4 cm) DXST10000EXT 41545 2-FOOT TALL / 1-SHELF HEIGHT EXTENDER KIT FOR DXST10000 INDUSTRIAL RACK • Add another 2-feet of height and another shelf to your existing 6-foot DEWALT storage rack • Wire grid shelf has the same massive capacity as existing shelves at 2,500 lb. when evenly distributed • The industrial powder-coating finish on the steel uprights, support straps, and crossbeams won’t chip or fade • Wire grid shelf features a total of 8 shelf and beam support straps to prevent twisting or spreading under heavy loads • Steel stacking plates securely connect the extension to existing rack uprights • Locking pins on crossbeams and stacking plates secure them in place while grid clips hold the wire deck and prevent warping • Shelf is adjustable in the same 3-inch increments as the DXST10000 rack • Rugged glass-filled nylon feet prevent scratched flooring and allow extension to be used as a short, stand-alone rack Height24" (61 cm) Width77" (195 cm) Depth24" (61 cm)ACCESSORIESRACK PROTECTSCORROSIONAGAINSTCAPPEDFEETFEET ADJUSTABLESHELVES INCREMENTS7.623"CM RACK DEPTH 60.9624"CM SHELF CAPACITY 2500 LB. FITS DXST4500 & DXST10000 MOUNTUPRIGHTUNIVERSALRACKS LOAD CAPACITY 50 LB.
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 19 OFFICIALLY LICENSED BY DXSTA04MP 41568 4 PACK LEVELING FEET • Add additional security to your DEWALT storage rack with these leveling mounting plates • Mounting plates are made of durable steel and replace the rack’s existing glass filled nylon non-marring feet • Provides up to 7-inches of height adjustment to each upright allowing for easy rack leveling on uneven floors • Designed to fit DEWALT DXST10000, DXST4500, and DXST4500-W storage racks • Includes wedge anchors to allow plates to be secured to concrete floors for additional tipping prevention DXSTACLR 41589 3 PIECE WALL MOUNT CANTILEVER RACK • Each short arm can support 50 lb., 25 lb. per medium arm, and 16 lb. per long arm for a total of 273 lb. of evenly distributed storage • Set includes 3 different cantilever arm lengths with 6-inch, 10-inch, and 12-inch lengths • Arms and rails are made of durable steel with an industrial grade powder-coating finish that won’t chip or fade • Each support arm features a 2.5-inch flat tab on the end to prevent round stock from rolling off • 36-inch tall wall mount rails easily mount to both finished walls or to bare 2x4 studs • Cantilever arms can be adjusted in 2.35-inch increments • 6-inch, 10-inch, and 12-inch arms support common lumber depths to make functional shelves Assembled Height36" (91.44 cm)Arm Load Capacity Small Arm Length 6" (15.24 cm)50 lbs Medium Arm Length 10" (25.4 cm)25 lbs Large Arm Length 12" (30.48 cm)16 lbs ACCESSORIESRACK MULTIPLEDEPTHSARM 15.246" CM 1210"25.4CM"30.48CM ADJUSTABLEARMS INCREMENTS5.972.35"CMINCREMENTS LEVEL OUT UNEVEN SURFACES
WWW.DEWALTSHELVING.COM 20 Height3.5" (8.89 cm) Width7" (17.78 cm) Depth5" (12.7 cm) DXSTA10MPB 41564 MAGNETIC PARTS BUCKET • Bucket mounts securely on storage rack beams and supports, steel pegboards, tool boxes, lifts, and almost any metal surface • Rugged polypropylene construction can absorb impacts from hard use and resists most chemicals and solvents • 3 powerful neodymium mounting magnets let the bucket hold a few pounds of parts and components • 3 back and 3 bottom magnet mounting points allow you to mount the bucket vertically or horizontally • Grooved dividers on the interior surface help separate small parts while working • Bucket measures 7-inches wide x 3.5-inches high x 5-inches deep DXSTA2CM 41600 2 CORDPIECEMINDERS • Each set of arm brackets can support a total of 50 lbs. easily enough to hold 100-feet of 10/3 heavy-duty cord • Mounts to the uprights on both DXST4500 4-foot, and DXST10000 6-foot DEWALT storage racks • Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • The end stops on each bracket feature a spring loaded rotating end stop that can lock into place in 90-degree increments • Locking pins secure the cord minder brackets to rack uprights and prevents movement when bumped or while loading Height6.3" (16 cm) Width2.7" (6.9 cm) Depth6.8" (17.3 cm) ACCESSORIESRACK MAGNETIC MOUNT FITS DXST4500 & DXST10000 MOUNTUPRIGHTUNIVERSALRACKS360ºBRACKETROTATING LOAD CAPACITY 50 LB.
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 21 OFFICIALLY LICENSED BY DXSTA500LM 41553 3 PACK MOTION SENSOR LIGHT KIT • Made of durable and lightweight aluminum with a fire-retardant ABS plastic casing and a polycarbonate lens over the LEDs • Included motion sensor with on/off/sensor modes and a 5-minute automatic shutoff delay if no motion is detected • The 3 light strips each provide 500 lumens of bright LED illumination without the heat generated by traditional bulbs • Low profile design uses a minimum footprint to provide light to your racks without using up your storage space • Each light has a pair of powerful neodymium magnets for easy and secure attachment to any steel storage rack • Kit includes 8 hook-and-loop strips to help manage power and jumper cords and keep your storage area tidy • Link together up to 6 LED strips per sensor to cast light on the largest storage racks (additional LED strips sold separately) DXSTA151PS 41594 15 AMP POWER STATION WITH GFCI AND DETACHABLE WORK LIGHT Height5.5" (13.97 cm) Width14.75" (37.47 cm) Depth3.5" (8.89 cm) • 8 standard 3-prong outlets and 2 USB outlets • Detachable and rechargeable LED work light built into handle produces up to 500 lumens of illumination with a 4 hour battery life • Built-in, resettable 15 AMP circuit breaker protects against damage from power surges • In-line GFCI will cut electricity to the entire power station if unintended current flow is detected • Anti-skid rubber feet keep the unit from moving when used as a light and can be removed to allow for wall mounting • Includes a pair of mounting brackets to allow easy mounting to DXST100000 or DXST4500 series industrial racks • 50 lb. capacity steel cord minder has rotating end stops able to hold up to 100-feet of 10/3 cable and mounts to DEWALT rack uprights ACCESSORIESRACK MAGNETIC MOUNTHANDS-FREEOPERATIONLED500LUMENSLEDLUMENS500 SJTW 12/3 FITS DXST4500 & DXST10000UNIVERSALRACKSUPRIGHTMOUNT
SEATINGSHOP 22 DEWALT SHOP SEATING FEATURES:ALL PROTECTIVE,NYLONGLASS-FILLEDFEETWIRE GRID LOWER SHELFFOAM-PADDED SEAT WITH TEXTURED VINYL COVER ALL STEEL FRAME WITH POWDER-COATING FINISH
HASSLE-FREE ASSEMBLY.
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™
In the tradition begun with the industrial storage racks, the DEWALT stools and bench are designed so their assembly is as stress-free as we can make it. So stress-free in fact that for the stools, we’ve done most of the assembly for you ahead of time, so you need only take a few minutes to attach the seat and you’re off.
Professional and home workshops need seating that can handle the often rough conditions found there, so we took the features that made our industrial racks stand out and used them to provide seating options that outlast all others in durability. Durable steel frames coupled with rip-resistant cushioned seating that can take the knocks, falls, and rigors of the workshop and keep coming back for more.
ABOUT THE SEATING TOUGH STEEL. COMFORTABLE SEAT.
WWW.DEWALTSHELVING.COM 24 Height30" (76.2 cm) Width17.25" (43.82 cm) Depth17.25" (43.82 cm) DXSTFH030 41561 SWIVEL SHOP STOOL • 360-degree swiveling, foam-padded seat with textured vinyl cover that resists rips and tears • Industrial strength wire grid lower shelf to store necessary tools and supplies • Rugged glass-filled nylon feet prevent scratched flooring and can be easily hand adjusted • Heavy-duty, all steel frame construction with a 300 lb. capacity • Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • Durable and heavy-duty bolted frame comes pre-assembled Height 22.5" - 26.75" (57.15 - 67.9 cm) Width15.75" (40 cm) Depth15.75" (40 cm) DXSTAH025 41562 ADJUSTABLE SHOP STOOL WITH CASTERS • 360-degree swiveling, foam-padded seat with textured vinyl cover that resists rips and tears • Pneumatic adjustable seat adjusts stool height from 22.5 to 26.75-inches to best suit your needs • Industrial strength wire grid lower shelf to store necessary tools and supplies • Choose mobility or floor protection with the included 360-degree casters and glass-filled nylon feet • Heavy-duty, all steel frame construction with a 300 lb. capacity • Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • Durable and heavy-duty bolted frame comes pre-assembled with casters attached SEATINGSHOP SWIVEL CASTERSSWIVEL SEAT 360˚ SELF-LEVELINGSWIVEL SEAT 360˚ PROTECTSCORROSIONAGAINSTCAPPEDFEETFEET SEAT CAPACITY 300 LB. SEAT CAPACITY 300 LB. PROTECTSCORROSIONAGAINSTCAPPEDFEETFEET
INDUSTRIAL STORAGE RACK PROGRAM BUILD UP. BUILD OUT.™ 25 Height19.75" (50.16 cm) Width49.6" (126 cm) Depth18" (45.7 cm) DXSTFB048 41563 GARAGE BENCH • Comfortable, high density foam-padded seat with textured vinyl cover that resists rips and tears • Benchtop can easily support 1,000 lb. and the wire grid shelf can hold an evenly distributed 1,500 lb. • Four locking grid clips keep the wire shelf deck secure and prevent warping under heavy loads • Rugged glass-filled nylon feet prevent scratched flooring • Heavy-duty, all steel frame construction with locking pins to keep crossbeams securely seated • Industrial grade powder-coating finish won’t chip or fade and protects against rust and corrosion • Storage shelf can be adjusted in 2.35-inch increments WWW.DEWALTSHELVING.COM/AR-VIEW offers an Augmented Reality view to see DEWALT shelving in your own space before you buy. Just look for this icon! THE ULTIMATE SOLUTIONS. SEATINGSHOP ADJUSTABLESHELVES INCREMENTS2.35"5.97CM PROTECTSCORROSIONAGAINSTCAPPEDFEETFEET SEAT CAPACITY 1000 LB. SHELF CAPACITY 1500 LB.
METAL FABRICATION PROGRAM WORK SMART. WELD SAFE.™
WWW.DEWALTWELDING.COM 28 FABRICATIONMETAL FABRICATIONMETAL FABRICATIONMETAL WELDINGMIG/TIG TIG WELDING STICK/MIGWELDING WELDING GLOVE PART # DXMF01011DXMF01052DXMF02051DXMF03051DXMF04051 DESCRIPTIONPRODUCT FABRICATORPREMIUMWELDINGGLOVES FABRICATORSHORTPREMIUMCUFFWELDINGGLOVES PREMIUMMIG/TIGWELDINGGLOVES PREMIUMWELDINGTIGGLOVES PREMIUMWELDINGSTICKGLOVES TYPE WELDINGOF Available in 6 Small–3X-Largesizes, ✔✔✔✔✔ 100% Grade-A buffalo leather provides maximum abrasion resistance without sacrificing dexterity ✔ ✔✔✔ 100% Grade-A Goat leather provides maximum abrasion resistance without sacrificing dexterity ✔ Glove features heat and fire-resistant Kevlar® stitching throughout the entire glove ✔✔✔✔✔ Leather reinforcing along the thumb saddle, palm, finger caps, and a drag patch for long glove life ✔✔✔✔✔ Snug-fitting elastic-sewn wrist keeps out debris while welding and allows glove to be easily slipped on and off ✔ ✔✔✔ Adjustable cuff enclosure provides a custom fit ✔ Made of fire-resistant materials to protect you from open flames, sparks, slag, and spall ✔✔✔✔ 100% leather shell provides excellent fire and heat insulation to protect against open flames, sparks, slag and spall ✔ Long, gauntlet-style open cuff is quick to put on and easily accommodates fire-resistant sleeves and jackets ✔ ✔ ✔ Long, gauntlet-style open cuff is quick to put on and features a hook-and-loop adjustable design for a snug fit ✔ Additional fire-resistant cotton padding provides increased impact protection to knuckles ✔✔✔ Index finger is fully seamless to promote accurate welds and help decrease slag drips ✔
METAL FABRICATION PROGRAM WORK SMART. WELD SAFE.™ 29 OFFICIALLY LICENSED BY HOLD MATERIALSLONGSUPPORTS SUPPORTS METAL METALNON-CONDUCTIVEPLASTIC PLASTIC FEET FEET FITS HOLES3/4STANDARDPOSTS" HOLES LOAD CAPACITY 1300 LB. FABRICATIONMETAL DXMF4618WT 92796 ADJUSTABLE WELDING TABLE DXMF3603WSH 92799 ADJUSTABLE LEG WELDING SAWHORSE Height 25" - 33" (63.5 - 83.8 cm) Width36" (91.4 cm) Depth3" (7.6 cm) Height 8"(20.336"-91.4 cm) Width46" (116.8 cm) Depth18" (54.7 cm) • Strategically located slots / post holes for mounting and clamping any shape project • Useable folded up atop existing work table or as a 36-inch tall free-standing welding station • Table legs have both spring pin / snap button locks and locking for added security under load • Conveniently located ground stud for connecting grounding clamps and leads • Oversized eye bolt ideal for holding welding guns and electrodes between uses • Cord minder helps keep cord slack under control and prevent tripping hazards • Strategically located 3/4-inch diameter post holes for mounting and clamping any shape project • Two V-shaped, toothed notches hold pipes and other stock for cutting and welding • Sawhorse legs have both tension latch locks and locking pins for added security when under load • Conveniently located grounding stud for connecting grounding clamps and leads • Oversized eye bolt ideal for holding welding guns and electrodes between uses • Fold-out tabs on legs help support square stock, pipes, and other welding materials WORKTOPCAPACITY 1000 LB. FITS HOLES3/4STANDARDPOSTS" HOLES NON-CONDUCTIVEPLASTIC PLASTIC FEET FEET ADJUSTABLELEGS
WWW.DEWALTWELDING.COM 30 PAGE REFERENCES AND PACKAGING INFORMATION DXST10000 ������������������������������������������������������������pgs� 4, 5, 6, 7, 8, 12 INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF 56829 PACKAGING DIMS: 75�25" L x 25�25" W x 5�44" H WEIGHT: 183 lbs DXST10000BLK ����������������������������������������������������������������pgs� 6, 7, 13 INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF, BLACK 41660 PACKAGING DIMS: 75�25" L x 25�25" W x 5�44" H WEIGHT: 183 lbs DXST4500 �������������������������������������������������������pgs� 2, 3, 4, 5, 6, 7, 9, 20 INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF 56831 PACKAGING DIMS: 48�5" L x 18�5" W x 4�75" H WEIGHT: 71 lbs DXST4500BLK ������������������������������������������������������������������pgs� 6, 7, 13 INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF, BLACK 41658 PACKAGING DIMS: 48�5" L x 18�5" W x 4�75" H WEIGHT: 71 lbs DXST4500BLK-W ������������������������������������������������������������pgs� 6, 7, 13 INDUSTRIAL RACK WITH WIRE GRIDS 4-FOOT TALL / 3-SHELF, BLACK 41659 PACKAGING DIMS: 48�5" L x 18�5" W x 4�75" H WEIGHT: 70 lbs DXST4500-W��������������������������������������������������������������������pgs� 6, 7, 10 INDUSTRIAL RACK WITH WIRE GRIDS 4-FOOT TALL / 3-SHELF 41590 PACKAGING DIMS: 48�5" L x 18�5" W x 4�75" H WEIGHT: 70 lbs DXST6000WB��������������������������������������������������������������������pgs� 6, 7, 12 4-SHELF INDUSTRIAL STORAGE RACK WORK STATION 41609 PACKAGING DIMS: 49�61" L x 19�29" W x 9�84" H WEIGHT: 149�91 lbs DXST3000WB��������������������������������������������������������������������pgs� 6, 7, 11 2-SHELF INDUSTRIAL STORAGE RACK WORK STATION 41631 PACKAGING DIMS: 50�39" L x 19�09" W x 6�81" H WEIGHT: 108�02 lbs INDUSTRIAL RACKS INDEX/FABRICATIONMETAL DXMF21011 41603 LARGE WINDOW AUTO-DARKENING WELDING HELMET • 4 lightning fast arc sensors engage and darken the filter in 1/15,000 of a second • Independent shade control allows you to fine tune the DIN level according to preference or welding process • Adjustable lightening delay can be set from 0.2 - 1.0s to reduce user eye strain and fatigue • Auto-darkening filter is protected from sparks and slag by both a large exterior and a smaller interior protective lens • CR2450 battery is augmented by a solar cell that charges as you weld for lasting power • Multi-point adjustable headgear with integrated sweat band stays comfortable during long welding jobs Z87+PROTECTIONIMPACTPANORAMICVIEW GRINDINGMODEDARKENINGAUTO Pano Viewing Area 20�4 sq in (51�8 sq cm) Shade RangeDIN 4 / 5-8 / 9-13 Grind Mode Yes Arc SwitchingSensors4Time1/15,000 s Delay Range0�2 - 1 s Weight 1�55 lb (703 g) Power SupplyCR2450 battery, solar assist (included) ACCESSORIES AND REPLACEMENT PARTS: 41603-ADFReplacement Auto Darkening Filter 41603-FPLReplacement Front Protective Lens 41603-IPL-5PKInner Protective Lens 5-Pack 41603-HDGR Replacement Adjustable Headgear
METAL FABRICATION PROGRAM WORK SMART. WELD SAFE.™ 31 OFFICIALLY LICENSED BY INDEX PAGE REFERENCES AND PACKAGING INFORMATION METAL FABRICATION SHOPDXSTAH025SEATING �������������������������������������������������������������pgs� 5, 22, 23, 24 ADJUSTABLE SHOP STOOL WITH CASTERS 41562 PACKAGING DIMS: 16�93" L x 16�93" W x 15�16" H WEIGHT: 23�15 lbs DXSTFH030 ������������������������������������������������������������pgs� 3, 5, 22, 23, 24 SWIVEL SHOP STOOL 41561 PACKAGING DIMS: 18�3" L x 18�3" W x 26�38" H WEIGHT: 22�04 lbs WELDING GLOVES �������������������������������������������������������pgs� 26, 27, 28 DXSTFB048 �������������������������������������������������������������pgs� 5, 22, 23, 25 GARAGE BENCH 41563 PACKAGING DIMS: 52�36" L x 20�87" W x 6�69" H WEIGHT: 59�52 lbs RACK ACCESSORIES GLOVE MODEL SIZES AND PART DXSTF01011DXSTF01052DXSTF02051DXSTF03051DXSTF04051NUMBERS S DXMF01011SMDXMF01052SMDXMF02051SMDXMF03051SMDXMF04051SM M DXMF01011MDDXMF01052MDDXMF02051MDDXMF03051MDDXMF04051MD L DXMF01011LGDXMF01052LGDXMF02051LGDXMF03051LGDXMF04051LG XL DXMF01011XLDXMF01052XLDXMF02051XLDXMF03051XLDXMF04051XL 2XL DXMF01012XLDXMF010521XLDXMF020512XLDXMF030512XLDXMF040512XL 3XL DXMF01013XLDXMF010523XLDXMF020513XLDXMF030513XLDXMF040513XL DXST10000PBK ����������������������������������������������������pgs� 4, 5, 14, 15, 16 2 PIECE STEEL PEGBOARD KIT for DXST10000 Industrial Rack 41554 PACKAGING DIMS: 75�98" L x 24�8" W x 2�36" H WEIGHT: 61�73 lbs DXST4500PBK �������������������������������������������pgs� 3, 4, 5, 14, 15, 16, 22 2 PIECE STEEL PEGBOARD KIT for DXST4500 Industrial Rack 41557 PACKAGING DIMS: 48�03" L x 18�9" W x 3�54" H WEIGHT: 28�46 lbs DXST10000EXT ����������������������������������������������������pgs� 4, 5, 14, 15, 18 2 FOOT TALL / 1-SHELF HEIGHT EXTENDER KIT for DXST10000 Industrial Rack 41545 PACKAGING DIMS: 13�39" L x 75�59" W x 3�54" H WEIGHT: 56 lbs DXST4500DK ������������������������������������������������������pgs� 2, 4, 5, 14, 15, 17 DRAWER KIT for DXST4500 Industrial Rack 41559 PACKAGING DIMS: 45�07" L x 19�48" W x 1�97" H WEIGHT: 30�86 lbs DXSTA04MP ������������������������������������������������������������pgs� 4, 14, 15, 19 4 PACK LEVELING FEET 41568 PACKAGING DIMS: 11�25" L x 6�75" W x 3�5" H WEIGHT: 5�43 lbs DXST4500WTD ��������������������������������������pgs� 3, 4, 5, 6, 14, 15, 16, 22 WORKTOP DRAWER KIT for DXST4500 Industrial Rack 41567 PACKAGING DIMS: 46�25" L x 21" W x 9" H WEIGHT: 64�65 lbs DXMF21011 ������������������������������������������������������������������pgs� 26, 27, 30 LARGE WINDOW AUTO-DARKENING WELDING HELMET 41603 PACKAGING DIMS: 12�13" W x 15�19" H x 10" D WEIGHT: 1�55 lbs DXMF3603WSH �����������������������������������������������������������pgs� 26, 27, 29 ADJUSTABLE LEG WELDING SAWHORSE 92799 PACKAGING DIMS: 36" L x 3" W x 6�5" H WEIGHT: 27 lbs DXMF4618WT ��������������������������������������������������������������pgs� 26, 27, 29 ADJUSTABLE WELDING TABLE 92796 PACKAGING DIMS: 46" L x 18" W x 8" H WEIGHT: 45 lbs DXSTA26CLB ��������������������������������������������������������������pgs� 4, 14, 15, 18 2 PIECE 6-INCH CANTILEVER BRACKETS PACKAGING41559 DIMS: 45�07" L x 19�48" W x 1�97" H WEIGHT: 30�86 lbs DXSTA10MPB ����������������������������������������������������������pgs� 5, 14, 15, 20 MAGNETIC PARTS BUCKET 41564 PACKAGING DIMS: 7�3" L x 5�2" W x 3�6" H WEIGHT: 0�65 lbs DXSTA500LM ������������������������������������������������������pgs� 5, 6, 14, 15, 21 3 PACK MOTION SENSOR LIGHT KIT 41553 PACKAGING DIMS: 16�25" L x 4�75" W x 11�5" H WEIGHT: 2�54 lbs DXSTACLR ��������������������������������������������������������������������pgs� 14, 15, 19 3 PIECE WALL MOUNT CANTILEVER RACK 41589 PACKAGING DIMS: 36�5" L x 12�25" W x 3" H WEIGHT: 23�05 lbs DXSTACM �����������������������������������������������������������pgs� 4, 14, 15, 20, 22 2 PIECE CORD MINDERS 41600 PACKAGING DIMS: 7" L x 6�75" W x 3�5" H WEIGHT: 2�78 lbs DXSTA151PS �������������������������������������������������������pgs� 4, 5, 14, 15, 21 15 AMP POWER STATION WITH GFCI AND DETACHABLE WORK LIGHT 41594 PACKAGING DIMS: 17�5" L x 7�4" W x 9" H WEIGHT: 9�95 lbs
JS PRODUCTS • 6445 MONTESSOURI STREET • LAS VEGAS, NV 89113 CUSTOMER SERVICE: 855.558.2422 • FAX: 775.808.8773 WWW.DEWALTSHELVING.COM • WWW.DEWALTWELDING.COM Copyright © 2021 DEWALT. DEWALT® and the DEWALT Logo are trademarks of the DEWALT Industrial Tool Co., or an affiliate thereof and are used under license. The yellow/black color scheme is a trademark for DEWALT power tools & accessories. V18 - DIGITAL USE ONLY
