Just Manufacturing Faucet Catalog by Rachel Collins

H R

E E

N S F

I R

V E

N C

E G

Commercial Grade & Residential Application Faucets and Accessories

JUSTâ&#x20AC;Śthe stainless source for spec series faucets j

a n u f a c t u r t m f g . c o m

COMMERCIAL & RESIDENTIAL FAUCETS

Table Of Contents

Aerator and Handle Options

Scullery and Service Sink Faucets and Pre-Rinse Backsplash Type

Single Handle Mixing Faucet

Knee and Foot Pedal Valves and Spouts

Single Handle Faucets with 3 Gooseneck and High Rise Arc Spout Accessories

J-35 Series Drains

Enviro Series Sensor Faucet

No. 15 Series Drains

Gooseneck Faucets

J-35 Series Remote Twist/ Lavatory Drains,

Two Handle Mixing Faucets

Standard Overflow, 11185 Elbow, Cast P-trap

Two Handle Commercial Faucets with High Rise Arc SWpouts/Triple Radius Spouts

Continuous Waste System

Gooseneck Bar Faucets

ADA Compliant Drain Systems and Insulators Kits

Lavatory Faucets

Kitchen Accessories

Classroom Faucets, Bubblers and Drains

Hot Water Taps

Vandal Resistant Classroom Faucets, Bubblers, Drains and Accessories

Heaters

Visit Just Stainless Steel Sinks at www.justmfg.com

SPEC FAUCETS FOR TODAYS COMMERCIAL MARKET NEEDS CERTIFIED LEAD-FREE

Beginning in 2010, only the lead-free plumbing components meeting the AB 1953 0.25% lead standard could be sold in California. Vermont also recently passed bill S.152 which regulates the amount of lead in consumer products, similar to the California AB 1953. Vermont bill S.152 also prohibits the sale of plumbing fixtures whose wetted surfaces contain more than a weighted average of 0.25% lead. Many states are adopting similar standards. JUST Faucets are engineered to meet today’s commercial applications in health care, acad emic, hospitality, institutional and industrial applications. Architects and mechanical engineers recognize JUST quality and dependability in harsh, high use environments. JUST offers a full line of market specific products meeting the wide range of today’s specifier needs.

SINGLE HANDLE MIXING TYPE FAUCETS ADVANTAGE CARTRIDGE FEATURES • Stainless steel valve assures long life and smooth, maintenance-free operation • Washerless design resists wear because of absence of mechanical force • Non-corrosive single handle device • Built-in noise inhibitor • Flow rate 2.2 GPM at 80 PSI

COMMERCIAL FAUCETS

In addition to the line of commercial faucets, JUST produces a full line of specialty drains and fittings. ADA Compliant, corrosion resistant, remote style, and vandal resistant features are all available in stock models. All JUST Faucets meet NSF-61. • All Just Faucets are produced with a lifetime PVD Finish • Supplied with a 2.2 GPM aerator @ 80psi – 1.5 GPM and 0.5 GPM aerator options.

ADVANTAGE CARTRIDGE DESIGN TWO HANDLE MIXING TYPE FAUCETS

• Replaceable seats • “Uniform Flow Packing” provides constant flow • All brass cartridge • Brass quarter turn stem units • Copper seats with replaceable reinforced packing

AERATOR OPTIONS “B” JSA-450

Swivel Aerator

Duo stream model, spray or stream. Available as option on faucets specified. Specify “B” as suffix to model number.

“JRS” JRS-550

“LF” LFA-500

AERATOR LOW FLOW OPTIONS

Vandal Resistant

Laminar Flow

Rose Spray

Available as option on faucets specified. Add “JRS” as suffix to faucet model number. Not available on all faucets.

“VR-A” VRA-600

Available on most faucets. 1.5 GPM 0.5 GPM

Available as option on fau cets specif ied. Add “LFA” as suffix to faucet model number.

Includes special key wrench. Pre vents unauthorized removal from faucet. Available as option on fau cets specified. Add “VR-A” as suffix to faucet model number.

HANDLE OPTIONS “LV” LEVER HANDLES

“TR” TEAR DROP HANDLES

“W” WRIST BLADE HANDLES “W4”

“W6”

Pair of PVD chrome finished lever handles for faucets as noted. Add “LV” as suffix to faucet model number. Not available on all faucets.

Pair of PVD chrome finished tear drop handles for faucets as noted. Add “TR” as suffix to faucet model number. Not available on all faucets.

Pair of chrome plated cast brass handles color indexed hot/cold. Add “W4” model number for 4” wrist blades. Add “W6” for 6” wrist blades.

SINGLE HANDLE MIXING FAUCETS SPECIFICATIONS - SINGLE HANDLE MIXING FAUCETS

COMMERCIAL FAUCETS

These faucets feature triple plated polished PVD chrome finish, water saving aerator with 2.0 GPM flow rates, replaceable washerless valve cartridges and PVD chrome plated die cast lever handles. The faucets in this group conform to ANSI A112.18.1 and are ADA Compliant. Options: B, VR-A. (See page 1)

J-900

J-902

J-906

Deck mounted washerless mixing faucet with escutcheon. 8” reach, brass swing spout. J-901 identical to J-900 except includes spray with hose. PVD chrome finish.

Deck mounted washerless mixing faucet with escutcheon. Includes hose with spray. Spray head mounted on escutcheon. 8” reach brass swing spout. PVD chrome finish.

Deck mounted washerless mixing faucet with 8” reach, brass swing spout. J-907 identical to J-906 except includes spray with hose. PVD chrome finish.

SINGLE HANDLE FAUCETS WITH GOOSENECK AND HIGH RISE ARC SPOUTS

NEW IGN! PRODUCT DES J-990-WF Swivel Spout

Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. Matching chrome plated spray. Finish: PVD Chrome. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator.

J-990-LS Swivel Spout

J-990-LS-R 70º Restricted Spout

Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. Less spray. Finish: PVD Chrome. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator.

Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. 70º restricted swing spout. Less spray. Finish: PVD Chrome. Vandal Resistant. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator.

70º Restricted Swing Spout

ACCESSORIES JHDD-2000

JTM47 Thermostatic Mixing Valve

Commercial grade stainless steel liquid soap dispenser. 34 fl. oz. capacit y. Plung er and escutcheon are vandal resistant. Reservoir and shank high impact resistant ABS.

Anti-Scald mixing valve with bronze body with integral check valves and adjustment cap with locking feature. 1/2” threaded union inlet and outlet connections. Temperature range from 60 to 120 F(16 C to 49 C). ASSE Standard 1016 Listed.

VR VANDAL RESISTANT

AERATOR LOW FLOW OPTIONS

Available on all faucets. 1.5 GPM 0.5 GPM

Enviro Series SENSOR FAUCETS AC = AC POWERED–Plug-in power adapter with armored/vandal resistant output cable, 3/8” copper supply tube, in-line filter and mounting hardware. B = BATTERY POWERED–Battery holder with (4) AA batteries, 3/8” copper supply tube, in-line filter and mounting hardware.

JSL-46-AC or B

JSGN-6-AC or B

Sensor-operated backsplash mounted faucet. Chrome plated solid brass construction faucet body. Chrome plated spout 12-3/4” high from bottom of base (8-3/4” from base to aerator) with 5-3/8” reach. Laminar flow 2.0GPM aerator.

Single-hole deck mount, non-mixing automatic gooseneck faucet with chrome plated, solid brass construction. Includes faucet, sensor assembly with; Armored/vandal resistant control cable, wall mountable/vandal and water resistant control box, 6” gooseneck spout with 2.0 GPM laminar flow control, 6V DC, slow-closing solenoid valve, 3/8” copper supply tube, in-line filter and mounting hardware.

Slow closing solenoid valve, piston-operated, provides reliable smooth operation without water hammer. In-line filter with clean-out trap. Sensor range adjustable from 6” to 30”. Automatic time-out feature adjustable from 0 (presetactive until no activity sensored) up to 60 seconds in 15 second intervals. Shut-off delay adjustable to 0, 1(preset), 2,4 or 8 seconds.

JSL-100-AC or B

Deck mount, non-mixing, automatic faucet with chrome plated, solid brass construction (single hole punch required). Includes faucet, sensor assembly with armored/vandal resistant control cable, vandal and water resistant wall-mountable control box. 1.5 GPM vandal resistant laminar flow control as standard, 6V DC, slow-closing solenoid valve, 3/8” copper supply tube, in-line filter and mounting hardware. Features preset/adjustable sensor beam angle. Sensor range is preset/adjustable, automatic timeout is preset at 30 seconds but also adjustable to 0, 15, or 60 seconds. Shut-off delay is preset at 1 second but adjustable up to 0, 2, 4, or 8 seconds.

JSL-300-AC or B Sensor

Deck mount, non-mixing, automatic faucet with chrome plated, solid brass 4” centerset construction, three hole punching required.

COMMERCIAL FAUCETS

Features preset/adjustable Sensor Beam Angle, sensor range is preset/adjustable, automatic time-out is preset at 0 seconds but also adjustable to 15, 30, or 60 seconds. Shut-off delay is preset at 1 second but adjustable up to 0, 2, 4, or 8 seconds.

JSGN-6M-AC or B

Deck mount, mixing, automatic gooseneck faucet with chrome plated, solid brass construction with built-in temperature control and manual override. Includes faucet/sensor assembly with: Armored/vandal resistant control cable, wall mountable, vandal and water resistant control box, 8” gooseneck spout with 2.0 GPM Laminar Flow Control, 6V DC slow closing solenoid valve, plug-in power adapter with armored/vandal resistant output cable, two (2) 3/8” braided S.S. supply lines, two (2) in-line filter/check valves with two (2) 3/8” compression adapters and mounting hardware.

NEW PRODUCT DESIGN!

Features preset/adjustable sensor beam angle; Preset/adjustable sensor range; Preset/adjustable time-out feature (0 preset, 15, 30, or 60 seconds); Preset/adjustable shut-off delay (Preset at 1 second but adjustable up to 8 seconds).

Includes faucet, sensor assembly with; Armored/ vandal resistant control cable, vandal and water resistant wall-mountable control box, 0.5 GPM vandal resistant laminar flow control, 6V DC slow-closing solenoid valve.

GOOSENECK FAUCETS SPECIFICATIONS - GOOSENECK FAUCETS

The faucets in this group feature polished PVD chrome plate finish, solid cast brass bodies, water saving aerators, brass quarter turn quick compression stem units, replaceable seat washers, and chrome plated cast brass handles. The faucets in this group conform to ANSI A112.18.1 and are ADA Compliant.

J-1174-KS

JGN-740

JGN-750

Concealed mixing faucet with 5-1/2” reach, PVD chrome swivel gooseneck spout with 2.2 GPM flow restricting aerator. 4” wrist blade handles, color indexed hot and cold. Options: W6, B, JRS, VR-A, VR-H. J-1174-R identical to J-1174-KS, except with rigid, non-swiveling spout.

Deck mount single hole gooseneck faucet with 4-15/16” reach, rigid spout and 2.2 GPM flow restrict ing aerator. Handles are indexed “H” & “C”. Deck to top of spout 11-15/32”. Deck to aerator 8-15/32”. PVD chrome finish. Options: W4, W6, B, JRS, VR-A, VR-H.

Deck mount single hole gooseneck faucet with 6 1/2” swivel spout and 2.2 GPM flow restricting aerator. Handles are indexed “H” & “C”. Deck to top of spout 12-1/16”. Deck to aerator 7-7/8”. PVD chrome finish. Options: W4, W6, B, JRS, VR-A, VR-H.

TWO HANDLE MIXING FAUCETS SPECIFICATIONS - TWO HANDLE MIXING FAUCETS

FAUCETS

These two handle mixing faucets feature polished PVD chrome finish, solid cast brass bodies, water saving aerator with 2.2 GPM flow rates, brass quarter turn stem units, replaceable seats , and chrome plated die cast handles. The faucets in this group conform to ANSI A112.18.1 and are ADA Compliant. Options: W4, W6, B, VR-A, VR-H. (See page 1)

JB-710

JV-1120-A

JV-1122-A

JV-174-A

Deck mount mixing faucet. 10” reach, cast brass spout. Teardrop handles. Deck to top of spout 4-1/2”. Deck to aerator 3-1/4”. JB-700S identical to JB-710, except includes spray with hose. PVD chrome finish.

Deck mounted mixing faucet. 8” tube spout. Lever handles are indexed “H” & “C”. PVD chrome finish.

Deck mounted mixing faucet with 7-3/4” reach,PVD chrome finish brass spout.Lever handles indexed “H” & “C”. JV-1123-A Identical to JV-1122-A, except includes spray with hose.

Concealed mixing faucet. 7-3/4” PVD chrome finished brass spout. Lever handles are indexed “H” & “C”. JV-175-A identical to JV-174-A, except includes spray with hose.

TWO HANDLE COMMERCIAL FAUCETS WITH HIGH RISE ARC SPOUTS/TRIPLE RADIUS SPOUTS SPECIFICATIONS - TWO HANDLE COMMERCIAL FAUCETS

These faucets feature polished PVD chrome finish, water saving aerator with 2.2 GPM flow rates, brass quarter stem units, replaceable seats, cast brass bodies, and as chrome die cast teardrop handles. The faucets in this group conform to ANSI A112.18.1 and are ADA Compliant. Handle Options: Wrist blade-specify “W4” for 4” or “W6” for 6”, Vandal Resistant-specify “VR-H”. Aerator options: Vandal Resistant-specify “VRA”, Rose Spray Aerator-specify “JRS”. Option details shown on page 1 of this catalog.

JOL-400

JTR-50

JTR-51

Concealed offset faucet with 8-3/4” reach, high rise spout. Body with flexible hose connections. Deck to top of spout 11-5/8”. Deck to aerator 10-5/8”. JOL-401 identical to JOL-400, includes spray with hose. PVD chrome finish.

Deck mount mixing faucet. 6-5/8” reach, triple radius spout with cast brass support cone. Deck to top of spout 12-1/2”. Deck to aerator 10”. JTR-55 identical to JTR-50, includes spray with hose. PVD chrome finish.

Concealed faucet. 6-5/8” reach, triple radius spout with cast brass support cone. Deck to top of spout 12-1/2”. Deck to aerator 10”. PVD chrome finish.

JWF-100

JWF-200

Deck mounted faucet. 8-3/4” reach, high rise spout. Deck to top of spout 10-13/16”. Deck to aerator 9-13/16”. JWF-101 identical to JWF-100, includes spray with hose. PVD chrome finish.

Concealed faucet with 8-3/4” reach, high rise spout. Deck to top of spout 11-5/8”. Deck to aerator 10-5/8”. JWF-201 identical to JWF-200, includes spray with hose. PVD chrome finish.

GOOSENECK BAR FAUCETS SPECIFICATIONS - GOOSENECK BAR FAUCETS

Two handle bar sink mixing faucets. Featuring polished PVD chrome plate brass shell, cast brass bodies, water saving aerator with 2.2 GPM flow rate. The faucets in this group conform to ANSI A112.18.1 and are ADA Compliant.

JGN-4

JGN-5

Deck mounted mixing faucet with 3-7/8” reach, rigid gooseneck spout. Deck to top of spout 10-3/4”. Deck to aerator 6-1/2”. Replaceable seats. Lever handles indexed “H” & “C”. PVD chrome finish. Options: W4, W6, VR-A, VR-H. (See page 1)

Deck mounted mixing faucet with 3-7/8” swivel gooseneck spout. Deck to top of spout 10 3/4”. Deck to aerator 6 1/2”. Replaceable seats. Lever handles indexed “H” & “C”. PVD chrome finish. Options: W4, W6, VR-A, VR-H. (See page 1)

LAVATORY FAUCETS SPECIFICATIONS - COMMERCIAL FAUCETS

These faucets feature a polished PVD chrome finish, water saving aerator, chrome plated die cast handles, conform to ANSI A112.18.1 and are ADA Compliant.

J-950

J-951

J-952

Deck mounted single control lavatory faucet with PVD chrome housing and lever handle. Replaceable washerless valve cartridge. Less drain. Flow rate 2.0 GPM maximum. Options: LRS, VR-A.

Deck mounted single control lavatory faucet with PVD chrome housing and lever handle. Replaceable washerless valve cartridge. Includes pop-up drain. Flow rate 2.0 GPM. maximum. Options: LRS, VR-A.

Deck mounted single control lavatory faucet with PVD chrome housing and lever handle. Includes cast brass grid drain and 1-1/4” tailpiece. Replaceable washerless valve cartridge. Flow rate 2.0 GPM maximum. Options: LRS, VR-A.

FAUCETS

JV-1137-DA

J-ADA-952

JV-1139-A

Lavatory centerset faucet with pop-up drain and 1-1/4” tailpiece with PVD chrome finish. Solid cast brass body. Replaceable seats and aerator. Flow rate 2.2 GPM at 80 PSI. Options: W4, LRS, B, VR-A, VR-H, VRH/A.

Deck mounted single control lavatory faucet with PVD chrome finish housing and lever handle. Includes cast brass grid drain and 1-1/4” tailpiece. Replaceable washerless valve cartridge. Flow rate 2.0 GPM maximum. Options: LRS, VR-A.

Lavatory centerset faucet less drain. Solid cast brass body Replaceable seats and aerator Flow rate 2.2 GPM at 80 PSI. PVD Chrome finish. Options: W4, LRS, B, VR-A, VR-H, VRH/A.

AERATOR LOW FLOW OPTIONS

Available on all faucets. 1.5 GPM (See page 2 for all options noted)

0.5 GPM

CLASSROOM FAUCETS

Twice as Str as Bras ong s!

SPECIFICATIONS - CLASSROOM FAUCETS

PVD chrome finish. Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter tops in the classroom. The faucets in this group conform to ANSI A112.18.1 and are ADA Compliant. Vandal resistant models are shown on page 7.

JTR-51-R70 (restricted swing spout)

FAUCETS & BUBBLERS

Concealed faucet. 6-5/8” triple radius spout. Arc of swing spout restricted to 700. Polished PVD chrome finish. Cast brass body. Chrome die cast teardrop handles. Replaceable seats. 2.2 GPM flow restricting aerator. Deck to top of spout 12-1/2”. Deck to aerator 10”. Options: W4, W6, B, LRS,VR-A, VR-H, VRH/A.

JGN-1A

Deck mounted single supply with 4-11/16” reach, rigid gooseneck spout and 2.2 GPM flow restricting aerator. PVD Chrome plated cast brass body with lever handle. Deck to top of spout 12-11/16”. Deck to aerator 8-5/8”. Replaceable seats. Specify Hot “H” or Cold “C”. Options: W4, W6, VR-A, VR-H, VRH/A.

JWF-200-R70 (restricted swing spout)

ALL STAINLESS STEEL

CLASSROOM SINK BUBBLER JSB-10-FLX Flexible anti-microbial mouthguard self closing push button bubbler. Totally Lead Free construction of type 304 stainless steel. Replaceable stainless steel cartridge. Adjustable flow regulator. 1/2-14 NPS shank. Highly buffed finish. Vandal resistant pin helps prevent turning of fixture. NSF.61 approved.

NEW!

Flexible Anti-microbial Mouthguard with self closing push button.

CLASSROOM FAUCET

NEW!

JSFVR-5 Stainless faucet

Concealed faucet with 8-3/4” reach, high rise spout. Arc of swing spout restricted to 70 0. Cast brass body with die cast teardrop handles. Polished PVD chrome plated finish. Replaceable seats. 2.2 GPM flow restrict ing aerat or. Deck to top of spout 11-5/8”. Deck to aerat or 10-5/8”. Options: W4, W6, B, JRS, VR-A, VR-H, VRH/A.

Deck mounted single handle ADA Compliant faucet. Features type 304 all stainless steel body, spout, handle and supply pipe and ceramic disc cartridge. Polished stainless mirror finish. Aerator integral to spout and vandal resistant. Aerator removable with proprietary faucet wrench. Deck to top of spout 14”. Deck to aerator 9-3/4”.

JVR-1

Vandal resistant deck mounted single tap classroom faucet. Solid cast brass body with polished PVD chrome finish. Replaceable seats. Vandal resistant chrome plated die cast lever handle. 10-15/16” high, 4” reach, rigid brass gooseneck spout. 2.2 GPM vandal resistant flow restricting aerator. Options: LRS, VR-A, VR-H, VRH/A.

ADA COMPLIANT DRAIN SYSTEMS J-ADA-35

J-990-LS-R 70º Restricted Spout

Hi arc RIGID gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8” reach and 11” high spout. 70º restricted swing spout. Less spray. Finish: PVD Chrome. Vandal Resistant. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator.

Stainless steel cup strainer with removable stainless steel basket. 1-1/2” O.D. 17 gauge chrome plated brass offset tailpiece system.

(See page 1 for all options noted)

CLASSROOM SINK BUBBLERS JSB-10

Self closing push button bubbler. Type 304 stainless steel. Replaceable stainless steel car tridge. Adjustable flow regulator. 1/2”-14 NPS male shank. Conforms to ANSI A112.18.1. ADA Compliant. Highly buffed finish. Vandal resistant models are shown on page 7.

JBB-5

Self closing lever controlled offset bubbler. Solid cast brass body. Cast brass lever arm handle. Conforms to ANSI A112.18.1. ADA Compliant. 1/2”-14 NPT male shank. Polished PVD chrome finish.

VANDAL RESISTANT DRAINS J-ADA-35-SSF-VR

Stainless steel #35 flat grid vandal resistant drain. Includes 1-1/2” O.D. stainless steel tailpiece 4” long.

VR VANDAL RESISTANT

VANDAL RESISTANT CLASSROOM FAUCETS JTR-51-R70-VR

JVR-1

JWF-200-R70-VR

Concealed faucet. 6-5/8” reach, triple radius spout. Arc of swing spout restricted to 700. Cast brass body. Vandal resistant PVD chrome finish. Die cast teardrop handles. Replaceable seats. 2.2 GPM vandal resistant flow restricting aerator. Deck to top of spout 12-1/2”. Deck to aerator 10”. OPTIONS: W4, W6.

Vandal resistant deck mounted single tap classroom faucet. Solid cast brass body with polished PVD chrome finish. Replaceable seats. Vandal resistant chrome die cast lever handle. 10-15/16” high rigid brass gooseneck spout. 2.2 GPM vandal resistant flow restricting aerator.

Concealed faucet with 8-3/4” reach, high rise spout. Arc of swing spout restricted to 700. Cast brass body with die cast vandal resistant teardrop handles. Polished PVD chrome finish. Replaceable seats. 2.2 GPM vandal resistant flow restricting aerator. Deck to top of spout 11-5/8”. Deck to aerator 10-5/8”. Options: W4, W6.

VANDAL RESISTANT

Produced with lifetime PVD finish.

(See page 1 for all options noted)

VANDAL RESISTANT CLASSROOM BUBBLERS JSB-10-VR Stainless Steel

JSB-10-FLX-VR Stainless Steel

Self closing push button vandal resistant bubbler. Type 304 stainless steel. Replaceable stainless steel cartridge. Adjustable flow regulator. 1/2”-14 NPS shank. Highly buffed finish. Vandal resistant pin helps prevent turning of fix ture.

The JSB-10-VR-FLX is the vandal resistant version of the JSB-10-FLX unit (see page 5). Features a smooth flexible anti-microbial mouthguard with smooth surface for easy cleaning. An integral pin at the base prevents turning of unit when used with slotted die formation supplied on the JUST Academic group of classroom sinks.

VANDAL RESISTANT

FAUCETS & BUBBLERS

VR VANDAL RESISTANT

VANDAL RESISTANT CLASSROOM DRAINS J-35-SSF-VR

J-15-CB

Stainless steel #35 flat grid vandal resistant drain. Includes 1- 1/2” O.D. stainless steel tailpiece 4” long.

#15 Chrome plated brass vandal resistant drain.

VR VR

VANDAL RESISTANT

VANDAL RESISTANT ACCESSORIES JHDD-2000 Commercial grade stainless steel liquid soap dispenser. 34 fl. oz. capacity. Plunger and escutcheon are vandal resistant. Reservoir and shank high impact resistant ABS.

VR VANDAL RESISTANT

SCULLERY AND SERVICE SINK FAUCETS AND PRE-RINSE BACKSPLASH TYPE JS-47-TGSA

JS-48-TA1

JS-48-TA1-DJ

Backsplash mounted faucet with 4-1/16” reach, gooseneck spout with aerator. PVD Chrome cast brass body. Replaceable seats. 1/2”-14 NPT male shank and adjustable flanges. Inlet center line to aerator 6-3/16”. Inlet centerline to top of spout 10-3/16”. OPTIONS: W4, W6, B, J-RS, VR-A.

Backsplash mounted faucet with 7-7/8” reach, chrome plated tube spout. PVD Chrome cast brass body with lever handles. Replaceable seats. 1/2”-14 NPT male shank and adjustable flanges. Inlet center line to aerator 3-1/2”. Inlet centerline to top of spout 5-11/16”. OPTIONS: W4, W6, B, VR-A, VR-H.

Backsplash mounted faucet with 15” PVD chrome plated double jointed tube spout with aerator. PVD chrome finish and cast brass body with lever han dles. Replaceable seats. 1/2”-14 NPT male shank and adjustable flanges. Inlet center line to aerator 5-5/16”. Inlet centerline to top of spout 7-5/8”. OPTIONS: W4, W6, B, VR-A, VR-H.

JVB-1200

JPR-309

Heavy duty cast brass faucet assembly with rigid spout and vacuum breaker. Outlet with 3/4” hose thread, pail hook and top brace to wall with flange; distance from finish wall to outlet adjustable from 9” to 9-1/2”. Heavy duty quick-compression quarterturn stems and replaceable seats; with screwdriver stops built into body. Lever handles. Polished PVD chrome finish. OPTIONS: W4, W6. JVBR-1201 identical to JVB-1200 except with rough chrome plated finish.

A complete pre-rinse unit with mixing faucet to provide the correct water temperature. Assembly is used where a wall or backsplash connection is desired. Recommended where it is necessary to have no obstructions on sink top. Faucet has 8” centers with 1/2” IPS female eccentric flanged union inlets. The spring-action type gooseneck gives the user a wide range of coverage. Unit is 34” high with 15” overhang and measures 5” from bottom of spray valve to centerline of faucet. Longer length hoses furnished on request.

FAUCETS

J-514 Backsplash mounted. PVD Chrome, cast brass bibb faucet with hose end spout. Adjustable flange.

JLK-400 JLK-400 Heavy duty cast brass faucet assembly with rigid spout. Outlet with 1-1/6” hose thread, pail hook, and replaceable seats. Lever handles. Rough chrome PVD finish. OPTIONS: W4, W6.

NEW!

JPR-501 Commercial Grade Pre-Rinse Faucet

(See page 1 for all options noted)

Single hole heavy cast body with spring action goosneck. Quarter turn ceramic disc cartridge. Brushed nickel finish. Heavy duty magnetic hose mount holds the spray head securely in place for hand washing use. Supplied with stainless steel braided hose and 20.5” reach. Overall 20.5 “ height. 7.5” bottom of spray valve to centerline of faucet body.

JPRC-501 Same as above, but chrome plated.

FOOT PEDAL VALVES/KNEE VALVES/SPOUTS JS-10

Wall mounted, chrome plated, rigid 6-7/8” reach, tubular gooseneck spout with aerator (5-7/8” from wall to outlet). 3/8” IPS connection. Includes locknut.

JS-20

Deck mounted, chrome plated, rigid 9” reach, tubular gooseneck spout with aerator (4” from wall to outlet). Includes locknut and coupling nut.

JFVC-301

JKV-400

floor mounted dual pedal operated self closing foot valves. 1/2” inlets on 1-1/4” centers. Polished chrome pedals with rough chrome valve body. 1/2” outlet.

Heavy Duty knee valve with cam-acting stirrup for mixing hot and cold water. Valve will maintain set position. 1/2” IPS straight loose key stops on inlets. 1/2” IPS female outlet at rear.

JFV-320 Wall mounted, extra long double pedal valve, with renewable slow closing valve units. Pedals flip up and stay up to clear floor area for cleaning. 1/2” inlets and outlets on 1-1/4” centers. Base to centerline of inlets and outlets 1-5/8”. Wall to tip of pedals approximately 14”. Polished chrome finish. Loose key stops in inlets for shut-off and volume control. Includes unions, wall flanges.

J-35 SERIES DRAINS J-35 J-35-STP

JB-99

J-35-GS J-35-GS-STP

J-35 Type 304 stainless steel crumb cup strainer with removable stainless steel basket with locking shell. Basket fitted with rubber stopper on bottom. 1-1/2” O.D. chrome plated tailpiece, 4” long. J-35-STP Similar to J-35 drain above, except includes 1-1/2” O.D. type 304 stainless steel tailpiece, 4” long. J-35-GS Similar to J-35 drain above, except type 304 stainless steel ground seat stopper on bottom in place of rubber stopper. J-35-GS-STP Similar to J-35-GS drain above, except includes 1-1/2” O.D. type 304 stainless steel tailpiece, 4” long.

JB-99 Type 304 stainless steel drain from our Ballerina group. Features removable heavy gauge basket strainer and 1-1/2” O.D. chrome plated brass tailpiece, 4” long.

J-35-316 J-35-FS J-35-SSF

J-35-SSF-316

J-35-SS

J-35-SS-316

J-35-SS Type 304 stainless steel drain with rubber stopper and 1-1/2” O.D. stainless steel tailpiece, 4” long. J-35-SS-316 Type 316 Stainless steel drain with rubber stopper and 1-1/2” O.D. type 316 stainless steel tailpiece, 4” long.

J-35-316 Type 316 stainless steel crumb cup strainer with removable stainless steel basket. Basket fitted with rubber stopper on bottom. 1-1/2” O.D. type 316 stainless steel tailpiece, 4” long. J-35-GS-316 Type 316 stainless steel cup strainer with removable stainless steel basket. Basket fitted with type 316 stainless steel stopper on bottom. 1-1/2” O.D. type 316 stainless steel tailpiece, 4” long.

J-35-SSW

DRAINS

J-35-FS Chrome plated brass drain with flat strainer and 1-1/2” O.D. chrome plated brass tailpiece, 4” long. J-35-SSF Type 304 stainless steel drain body, stainless steel flat strainer and 1-1/2” O.D. stainless steel tailpiece, 4” long. J-35-SSF-316 Type 316 stainless steel drain body, flat strainer and 1-1/2” O.D. type 316 stainless steel tailpiece, 4” long.

J-35-GS-316

J-35-SSW-316

J-35-SSW Type 304 stainless steel drain with 7” high stainless steel standpipe and 1-1/2” O.D. stainless steel tailpiece, 4” long. Includes rubber stopper. Alternate sized standpipes are available. J-35-SSW-316 Type 316 stainless steel drain with 7” high type 316 stainless steel standpipe and 1-1/2” O.D. type 316 stainless steel tailpiece, 4” long. Includes rubber stopper. Alternate sized standpipes are available.

JV-35

JV-35-T

JV-35 Stainless steel drain with removable stainless steel cup strainer. Strainer fitted with rubber stopper on bottom. Less tailpiece. JV-35-T Stainless steel drain with removable stainless steel cup strainer. Strainer fitted with rubber stopper on bottom. 1-1/2” O.D. chrome plated tailpiece, 4” long.

JBRC-94 - Remote Handle JBRC-94 Type 304 stainless steel remote control drain with removable stainless steel cup strainer. 1-1/2” O.D. chrome plated brass tailpiece, 4” long.

JDP-35 - Drop Post/Grid Drain Sytem Chrome plated cast brass body and basket strainer with chrome plated brass basket and cast brass nuts.

NO. 15 SERIES DRAINS J-15 J-15-SS J-15-SS-316 J-15 Chrome plated brass drain with rubber stopper. 1-1/2” O.D. chrome plated tailpiece, 4” long. J-15-SS Type 304 stainless steel drain with rubber stopper. 1-1/2” O.D. stain less steel tailpiece, 4” long. J-15-SS-316 Type 316 stainless steel drain with rubber stopper. 1-1/2” O.D. Type 316 stainless steel tail piece, 4” long.

J-15-CC J-15-CC Stainless steel crumb cup strainer with removable basket and 1-1/2” O.D. chrome plated tailpiece, 4” long.

J-15-FS J-15-SSF J-15-SSF-316 J-15-FS Chrome plated brass drain with flat grid strainer. 1-1/2” O.D. chrome plated tailpiece, 4” long. J-15-SSF Type 304 stainless steel drain with flat grid strainer. 1-1/2” O.D. stainless steel tailpiece, 4” long. J-15-SSF-316 Type 316 stainless steel drain with flat grid strainer. 1-1/2” O.D. Type 316 stainless steel tailpiece, 4” long.

J-15-SSW J-15-SSW-316 J-15-SSW Type 304 stainless steel drain with 7” high stainless steel standpipe, and rubber stopper. 1-1/2” O.D. stainless steel tailpiece, 4” long. Alternate size standpipes available. J-15-SSW-316 Type 316 stainless steel drain with 7” high type 316 stainless steel standpipe, and rubber stopper. 1-1/2” O.D. Type 316 stainless steel tailpiece, 4” long. Alternate size standpipes available.

J-35 SERIES REMOTE TWIST/LEVER HANDLE DRAINS J-35-LAC-1-1/2 J-35-LAC-2

J-35-BLA-316-1-1/2 J-35-BLA-316-2

J-35-BLA-CWO-1-1/2 J-35-BLA-CWO-2

J-35-BLA-1-1/2 Twist handle drain with chrome plated cast bronze body, stainless steel flat strainer, and 1-1/2” O.D. chrome plated brass tailpiece, 4” long. J-35-BLA-2 Twist handle drain chrome plated cast with bronze body, stainless steel flat strainer, and 2” O.D. chrome plated brass tailpiece, 4” long.

J-35-LAC-1-1/2 Twist handle drain with bronze body, removable stainless steel basket, 1-1/2” O.D. chrome plated brass tailpiece, 4” long. J-35-LAC-2 Twist handle drain with bronze body, removable stainless steel basket, 2” O.D. chrome plat ed brass tailpiece, 4” long.

J-35-BLA-316-1-1/2 Lever handle drain with cast Type 316 stainless steel body, Type 316 stainless steel flat strainer, and 1-1/2” O.D. stainless steel tailpiece, 4” long. J-35BLA-316-2 Lever handle drain with cast Type 316 stainless steel body, Type 316 stainless steel flat strainer, and 2” O.D. type 316 stainless steel tailpiece, 4” long.

J-35-BLA-CWO-1-1/2 Twist handle drain with chrome plated cast bronze body, stainless steel flat strainer, and chrome plated brass overflow tube. 1-1/2” O.D. chrome plated brass tailpiece, 4” long. Stainless steel overflow face. J-35-BLA-CWO-2 Twist handle drain with chrome plated cast bronze body, stainless steel flat strainer, and chrome plated brass overflow tube. 2” O.D. chrome plated brass tailpiece, 4” long. Stainless steel overflow face.

DRAINS

J-35-BLA-1-1/2 J-35-BLA-2

LAVATORY DRAINS

STANDARD OVERFLOW

J-115-FS

JF-1535

Chrome plated cast brass flat grid drain with 1-1/4” chrome plated 17 ga. tailpiece. For use with lavatory sinks with overflow. If overflow is not used, drain requires JSW-395 spacer and washer.

Overflow assembly for use with standard J-15 and J-35 series drains. Overflow face diameter 2-5/8”. Head nickel plated brass with stainless steel face plate. 1-1/4” nickel plated brass elbow 14”x18”. Nickel plated brass “T”. Slip fit joint top and bottom for 1-1/2” O.D. tubing. Includes nuts, gaskets, sealing washers. 2” dia. hole required for head. Drain and tailpiece not included.

JHL-12 Chrome plated overflow for use with J-115-FS drain. Specify bowl size being used.

11185 ELBOW #11185 ELBOW

JSW-395 (Not Pictured)

Spacer cup and washer when not using JHL-12 with J-115-FS.

Cast brass elbow, rough chrome plated finish. Use with JV-35 drain for undersink dishwasher installations.

CAST P-TRAP 2” DIAMETER - CONTINUOUS WASTE 2” DIAMETER JT-200

JCW-202

2” O.D. semi-cast, chrome plated brass P-trap with 17ga. wall bend.

2” continuous waste for double compartment food service or large capacity sinks. Chrome plated cast brass tees and slip nuts. 2” O.D. 17 gauge polished chrome tubing and tailpiece. Threaded cast brass end run clean out plugs. End outlet.

JCW-203 2” continuous waste for triple compartment food service or large capacity sinks. cast brass tees and slip nuts. 2” O.D. 17 gauge polished chrome tubing and tailpiece. Threaded cast brass end run clean out plugs. End outlet.

CONTINUOUS WASTE SYSTEMS 1-1/2” J-60-S

J-290

Continuous waste for double compartment sinks. 1-1/2” O.D. chrome plated brass with slip fit connections at center outlet. Dimension from centerline-to-centerline of drain openings must be specified.

Continuous waste for triple compartment sinks. 1-1/2” O.D. chrome plated brass with slip fit connections at center outlet. Dimension from centerline-to-centerline of drain openings must be specified.

Continuous waste for triple compartment sinks. 1-1/2”O.D. chrome plated brass with slip fit connections at center outlet. Commonly used where different depth compartments are required. Dimension from centerline-to-centerline of drain openings must be specified.

J-53-S

J-76-S

Continuous waste for double compartment sinks. 1-1/2” O.D. chrome plated brass with slip fit connections at end outlet. Dimension from centerlineto-centerline of drain openings must be specified.

Continuous waste for triple compartment sinks. 1-1/2”O.D. chrome plated brass with slip fit connections at end outlet. Dimension from centerlineto-centerline of drain openings must be specified.

ADA COMPLIANT DRAIN SYSTEMS J-ADA-115-FS

J-ADA-35

Polished, chrome plated flat grid lavatory drain. Includes one piece 1-1/4” O.D. 17 gauge offset tailpiece. If overflow is not used, drain requires JSW-395 spacer and washer (not shown in catalog).

Stainless steel cup strainer with removable stainless steel basket. 1-1/2” O.D. 17 gauge chrome plated brass offset tailpiece system.

ADA COMPLIANT DRAINS AND INSULATORS

J-52-S

J-ADA-35-FS J-ADA-15-FS

Chrome plated brass drain with flat strainer and 1-1/2” O.D. 17 gauge chrome plated brass offset tailpiece system.

Chrome plated brass drain with flat grid strainer. 1-1/2” O.D. 17 gauge chrome plated brass offset tailpiece system.

ADA COMPLIANT DRAIN INSULATOR KITS J-ADA-125

J-ADA-150

ADA Compliant, flame-retardant insulator, meets the 1050F thermal conductivity level and chemical resistance requirements of ADA. Easy snap together installation. Kit fully covers drain. Use with 1-1/4” O.D. drain systems (J-ADA-115-FS).

ADA Compliant, flame-retardant insulator, meets the 1050F thermal conductivity level and chemical resistance requirements of ADA. Easy pull tie installation. Kit fully covers drain. Use with 1-1/2” O.D. drain systems (#35 type).

KITCHEN ACCESSORIES JSHC-1 HOLE COVER

KITCHEN ACCESSORIES - HOT TAPS HEATERS

Stainless steel faucet hole cover. Used to cover unused 1-1/2” diameter hole punchings in sink ledge. Chrome finish.

JBGF-1 GLASS FILLER

DISH DRAINER

Deck mounted pedestal glass filler. Chrome plate finish. Duo action, self closing and continuous flow. Deck to spout is 8”. Deck to top of unit is 9-5/8”. 3/8” IPS shank, with 3/8” tubing, sweat fitting.

Dish and flatware strainer. Removable flatware drainer. Available in almond only. Available in 2 sizes: 13-1/2”x13”x5” and 17-1/2”x13-1/2”x5”.

JDD-13-1/2x13 JDD-17-1/2x13-1/2

HOT WATER TAPS JB3H-3

JB2H-2

Instant hot water dispenser with gooseneck spout. 1/2 gallon tank, 100 cup per hour capacity. Includes copper water inlet tube and electrical plug-in. 120 volts, 10.8 amps, 1300 watts. O.D. of tank 6-1/16”x5-3/4”x11-13/32” high. Water temperature 1900F.

Instant hot water dispenser with chrome plated faucet. 1/2 gallon tank, 60 cup per hour capacit y. Includes copper water inlet tube and electrical plug-in. 115 volts, 50/60 cycle, 6.5 amps, 750 watts. O.D. of tank 6-1/16”x53/4”x11-13/32” high. Water temperature 1900F.

HEATERS

JSSH-34

JSS-2

4.5kw, single phase, 208/240 volt, 50/60 cycle. Under compart ment sanitizing water heater for compartments 16” to 18” square. Maintains water at 180ºF. Includes built-in controls, automatic shutoff, instructions, hose adapter, plug, gaskets and fittings. One drain opening required for sink, two additional drain opening required for heater. When ordering, please specify in which compartment heater is to be installed, and voltage required. Note: size recommendations based on 140ºF water supply with thirty minute pre-heat period to reach the sanitizing temperature. JSSH-39 identical to JSSH-34, except with 9kw, and is also available as 3 phase in addition to single phase.

Heavy duty electric immersion heater 16-1/2” wide x 32-1/4” high. Stainless steel frame, with thermostat and low water safety shut-off. Includes 42” three conductor molded rubber cord and cap and 16 gauge nickel plated mounting clamp. Input 6.0 kw, 208 or 230 volts, please specify. Capable of raising water temperature from 1400F to 1800F in 20 minutes when mounted in 18”x 18”x14” deep com partment.

INDEX

MODEL NUMBER PAGE 9 3 3 3 3 3 6 6 6 3 3 4 4 6 5 5 7 7 5 5 4 4 9 5 5 9 9 9 9 9 7 4 4 4 4 4 5 5 7 8 5 5 5 5 5 5 6 6 9 7, 8 5 5 5 7 8 5

DRAINS and WASTES J-115-FS 11 J-15 10 J-15-CB 8 J-15-CC 10 J-15-FS 10 J-15-SS 10 J-15-SSF 10 J-15-SSW 10 J-15-SS-316 10 J-15-SSF-316 10 J-15-SSW-316 10 11185 ELBOW 11 J-35 10 J-35-316 10 J-35-FS 10 J-35-GS 10 J-35-GS-316 10 J-35-GS-STP 10 J-35-SS 10 J-35-SS-316 10 J-35-SSF 10 J-35-SSF-316 10 J-35-SSF-VR 8 J-35-SSW 10 J-35-SSW-316 10 J-35-STP 10 J-35-BLA-1-1/2” 11 J-35-BLA-2” 11 J-35-BLA-316-1-1/2” 11 J-35-BLA-316-2” 11 J-35-BLA-CWO-1-1/2” 11 J-35-BLA-CWO-2” 11 J-35-LAC-1-1/2” 11 J-35-LAC-2” 11 J-52-S 12 J-53-S 12 J-60-S 12 J-76-S 12 J-290 12 J-ADA-115-FS 12 J-ADA-35 7, 12 J-ADA-35-FS 12 J-ADA-15-FS 12 J-ADA-35-SSF-VR 7 JB-99 10 JBRC-94 10 JCW-202 11 JCW-203 11 JDP-35 10 JF-1535 11 JHL-12 11 JT-200 11 JV-35 10 JV-35-T 10

MODEL NUMBER PAGE BUBBLERS JBB-5 JSB-10 JSB-10-FLX JSB-10-VR JSB-10-FLX-VR

7 7 7 8 8

KNEE / FOOT PEDAL VALVES JFVC-301 9 JFV-320 9

OPTIONS Lever Handles-”LV” Tear Drop Handles-”TD” Wrist Blade Handles “W” Swivel Aerator “B” Rose Spray Aerator Lavatory Rose Spray Aerator Vandal Resistant Aerator “VR-A” Vandal Resistant Handles “VR-H” VRA-600

2 2 2 2 2

INDEX

FAUCETS J-514 J-900 J-901 J-902 J-906 J-907 J-950 J-951 J-952 J-990-LS J-990-WF J-1174-KS J-1174-R J-ADA-952 JB-700-S JB-710 JGN-1AC JGN-1AH JGN-4 JGN-5 JGN-740 JGN-750 JLK-400 JOL-400 JOL-401 JS-10 JS-20 JS-47-TGSA JS-48-TA1 JS-48-TA1-DJ JSFVR-5 JSGN-6-AC or B JSGN-6M-AC or B JSL-46-AC or B JSL-100-AC or B JSL-300-AC or B JTR-50 JTR-51 JTR-51-R70 JTR-51-R70 -VR JTR-55 JV-174-A JV-175-A JV-1120-A JV-1122-A JV-1123-A JV-1137-DA JV-1139-A JVB-1200 JVR-1 JWF-100 JWF-101 JWF-200 JWF-200-R70 JWF-200-R70 -VR JWF-201

MODEL NUMBER PAGE

2 2 2 2

PRE-RINSE UNIT JPR-309 JPR-501

SOAP DISPENSER JHDD-2000

MISCELLANEOUS PARTS JB2H-2 JB3H-3 JBGF-1 JDD-13-1/2x13 JDD-17-1/2x13-1/2 JSHC-1 JSS-2 JSSH-34 JSSH-39 JTM47

9 9

3, 8

13 13 13 13 13 13 13 13 13 3

9 f

2 k

m 3

3 i

n 4

p 7 s

a 6

r 7

k 8

, .

5 .

e e