Chapter:
Engineering data sheet
Tools & Service
Page: 1 of 1
Sheet No.: 900105
Cylinder unpacking crate Item numbers covered by his datasheet 900105
Cylinder unpacking crate
General Crate for safely unpacking cylinders supplied on Fire Eater cylinder pallets
Specifications Material: Epoxy coated steel.
Installation The parts are assembled using the supplied screws. After assembly, the foot plates are to be bolted to the floor.
Operating Place the pallet with cylinders inside the crate. Put the safety chain across the cylinders, so that it is tight and prevents the cylinders from falling over. Cut the metal straps. Keep clear not to get struck by the sharp metal straps, which are under great tension and will recoil when cut. Always wear leather or cut resistant gloves and eye protection when unpacking cylinders
Maintenance Inspect all assembly points at regular intervals including the floor plate bolts. If loose, retighten or replace as necessary.
Text
Document: 900105 Cylinder unpacking crate.docx
Category: Control inert
Id:
BH
Rev:2014.12.16
Vølundsvej 17 DK- 3400 Hillerød Tel +45 7022 2769 Fax +45 7023 2769
1 2 3 4 5 6 7 8 9